Add support for WAKE_UCAST, WAKE_MCAST, WAKE_BCAST, WAKE_MAGIC and
WAKE_MAGICSECURE. This is only supported with the BCM54210E and
compatible Ethernet PHYs. Using the in-band interrupt or an out of band
GPIO interrupts are supported.
Broadcom PHYs will generate a Wake-on-LAN level low interrupt on LED4 as
soon as one of the supported patterns is being matched. That includes
generating such an interrupt even if the PHY is operated during normal
modes. If WAKE_UCAST is selected, this could lead to the LED4 interrupt
firing up for every packet being received which is absolutely
undesirable from a performance point of view.
Because the Wake-on-LAN configuration can be set long before the system
is actually put to sleep, we cannot have an interrupt service routine to
clear on read the interrupt status register and ensure that new packet
matches will be detected.
It is desirable to enable the Wake-on-LAN interrupt as late as possible
during the system suspend process such that we limit the number of
interrupts to be handled by the system, but also conversely feed into
the Linux's system suspend way of dealing with interrupts in and around
the points of no return.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A few PHY drivers are currently attempting to not suspend the PHY when
Wake-on-LAN is enabled, however that code is not currently executing at
all due to an early check in phy_suspend().
This prevents PHY drivers from making an appropriate decisions and put
the hardware into a low power state if desired.
In order to allow the PHY drivers to opt into getting their ->suspend
routine to be called, add a PHY_ALWAYS_CALL_SUSPEND bit which can be
set. A boolean that tracks whether the PHY or the attached MAC has
Wake-on-LAN enabled is also provided for convenience.
If phydev::wol_enabled then the PHY shall not prevent its own
Wake-on-LAN detection logic from working and shall not prevent the
Ethernet MAC from receiving packets for matching.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It seems like __builtin_offset() doesn't preserve CO-RE field
relocations properly. So if offsetof() macro is defined through
__builtin_offset(), CO-RE-enabled BPF code using container_of() will be
subtly and silently broken.
To avoid this problem, redefine offsetof() and container_of() in the
form that works with CO-RE relocations more reliably.
Fixes: 5fbc220862 ("tools/libpf: Add offsetof/container_of macro in bpf_helpers.h")
Reported-by: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230509065502.2306180-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
KCSAN reported a data-race when accessing node->ref.
Although node->ref does not have to be accurate,
take this chance to use a more common READ_ONCE() and WRITE_ONCE()
pattern instead of data_race().
There is an existing bpf_lru_node_is_ref() and bpf_lru_node_set_ref().
This patch also adds bpf_lru_node_clear_ref() to do the
WRITE_ONCE(node->ref, 0) also.
==================================================================
BUG: KCSAN: data-race in __bpf_lru_list_rotate / __htab_lru_percpu_map_update_elem
write to 0xffff888137038deb of 1 bytes by task 11240 on cpu 1:
__bpf_lru_node_move kernel/bpf/bpf_lru_list.c:113 [inline]
__bpf_lru_list_rotate_active kernel/bpf/bpf_lru_list.c:149 [inline]
__bpf_lru_list_rotate+0x1bf/0x750 kernel/bpf/bpf_lru_list.c:240
bpf_lru_list_pop_free_to_local kernel/bpf/bpf_lru_list.c:329 [inline]
bpf_common_lru_pop_free kernel/bpf/bpf_lru_list.c:447 [inline]
bpf_lru_pop_free+0x638/0xe20 kernel/bpf/bpf_lru_list.c:499
prealloc_lru_pop kernel/bpf/hashtab.c:290 [inline]
__htab_lru_percpu_map_update_elem+0xe7/0x820 kernel/bpf/hashtab.c:1316
bpf_percpu_hash_update+0x5e/0x90 kernel/bpf/hashtab.c:2313
bpf_map_update_value+0x2a9/0x370 kernel/bpf/syscall.c:200
generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1687
bpf_map_do_batch+0x2d9/0x3d0 kernel/bpf/syscall.c:4534
__sys_bpf+0x338/0x810
__do_sys_bpf kernel/bpf/syscall.c:5096 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5094 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5094
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff888137038deb of 1 bytes by task 11241 on cpu 0:
bpf_lru_node_set_ref kernel/bpf/bpf_lru_list.h:70 [inline]
__htab_lru_percpu_map_update_elem+0x2f1/0x820 kernel/bpf/hashtab.c:1332
bpf_percpu_hash_update+0x5e/0x90 kernel/bpf/hashtab.c:2313
bpf_map_update_value+0x2a9/0x370 kernel/bpf/syscall.c:200
generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1687
bpf_map_do_batch+0x2d9/0x3d0 kernel/bpf/syscall.c:4534
__sys_bpf+0x338/0x810
__do_sys_bpf kernel/bpf/syscall.c:5096 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5094 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5094
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x01 -> 0x00
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 11241 Comm: syz-executor.3 Not tainted 6.3.0-rc7-syzkaller-00136-g6a66fdd29ea1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023
==================================================================
Reported-by: syzbot+ebe648a84e8784763f82@syzkaller.appspotmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230511043748.1384166-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
v1.25 of pahole supports filtering out functions with multiple inconsistent
function prototypes or optimized-out parameters from the BTF representation.
These present problems because there is no additional info in BTF saying which
inconsistent prototype matches which function instance to help guide attachment,
and functions with optimized-out parameters can lead to incorrect assumptions
about register contents.
So for now, filter out such functions while adding BTF representations for
functions that have "."-suffixes (foo.isra.0) but not optimized-out parameters.
This patch assumes that below linked changes land in pahole for v1.25.
Issues with pahole filtering being too aggressive in removing functions
appear to be resolved now, but CI and further testing will confirm.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230510130241.1696561-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Edward Cree says:
====================
sfc: more flexible encap matches on TC decap rules
This series extends the TC offload support on EF100 to support optionally
matching on the IP ToS and UDP source port of the outer header in rules
performing tunnel decapsulation. Both of these fields allow masked
matches if the underlying hardware supports it (current EF100 hardware
supports masking on ToS, but only exact-match on source port).
Given that the source port is typically populated from a hash of inner
header entropy, it's not clear whether filtering on it is useful, but
since we can support it we may as well expose the capability.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow efx_tc_encap_match entries to include a udp_sport and a
udp_sport_mask. As with enc_ip_tos, use pseudos to enforce that all
encap matches within a given <src_ip,dst_ip,udp_dport> tuple have
the same udp_sport_mask.
Note that since we use a single layer of pseudos for both fields, two
matches that differ in (say) udp_sport value aren't permitted to have
different ip_tos_mask, even though this would technically be safe.
Current userland TC does not support setting enc_src_port; this patch
was tested with an iproute2 patched to support it.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow efx_tc_encap_match entries to include an ip_tos and ip_tos_mask.
To avoid partially-overlapping Outer Rules (which can lead to undefined
behaviour in the hardware), store extra "pseudo" entries in our
encap_match hashtable, which are used to enforce that all Outer Rule
entries within a given <src_ip,dst_ip,udp_dport> tuple (or IPv6
equivalent) have the same ip_tos_mask.
The "direct" encap_match entry takes a reference on the "pseudo",
allowing it to be destroyed when all "direct" entries using it are
removed.
efx_tc_em_pseudo_type is an enum rather than just a bool because in
future an additional pseudo-type will be added to support Conntrack
offload.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently tc.c will block them before they get here, but following
patch will change that.
Use the extack message from efx_mae_check_encap_match_caps() instead
of writing a new one, since there's now more being fed in than just
an IP version.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When force-freeing leftover entries from our match_action_ht, call
efx_tc_delete_rule(), which releases all the rule's resources, rather
than open-coding it. The open-coded version was missing a call to
release the rule's encap match (if any).
It probably doesn't matter as everything's being torn down anyway, but
it's cleaner this way and prevents further error messages potentially
being logged by efx_tc_encap_match_free() later on.
Move efx_tc_flow_free() further down the file to avoid introducing a
forward declaration of efx_tc_delete_rule().
Fixes: 17654d84b4 ("sfc: add offloading of 'foreign' TC (decap) rules")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pointer variables of void * type do not require type cast.
Signed-off-by: wuych <yunchuan@nfschina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement ->bpf_bypass_getsockopt proto callback and filter out
SCTP_SOCKOPT_PEELOFF, SCTP_SOCKOPT_PEELOFF_FLAGS and SCTP_SOCKOPT_CONNECTX3
socket options from running eBPF hook on them.
SCTP_SOCKOPT_PEELOFF and SCTP_SOCKOPT_PEELOFF_FLAGS options do fd_install(),
and if BPF_CGROUP_RUN_PROG_GETSOCKOPT hook returns an error after success of
the original handler sctp_getsockopt(...), userspace will receive an error
from getsockopt syscall and will be not aware that fd was successfully
installed into a fdtable.
As pointed by Marcelo Ricardo Leitner it seems reasonable to skip
bpf getsockopt hook for SCTP_SOCKOPT_CONNECTX3 sockopt too.
Because internaly, it triggers connect() and if error is masked
then userspace will be confused.
This patch was born as a result of discussion around a new SCM_PIDFD interface:
https://lore.kernel.org/all/20230413133355.350571-3-aleksandr.mikhalitsyn@canonical.com/
Fixes: 0d01da6afc ("bpf: implement getsockopt and setsockopt hooks")
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: linux-sctp@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Suggested-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault says:
====================
selftests: fcnal: Test SO_DONTROUTE socket option.
The objective is to cover kernel paths that use the RTO_ONLINK flag
in .flowi4_tos. This way we'll be able to safely remove this flag in
the future by properly setting .flowi4_scope instead. With these
selftests in place, we can make sure this won't introduce regressions.
For more context, the final objective is to convert .flowi4_tos to
dscp_t, to ensure that ECN bits don't influence route and fib-rule
lookups (see commit a410a0cf98 ("ipv6: Define dscp_t and stop taking
ECN bits into account in fib6-rules")).
These selftests only cover IPv4, as SO_DONTROUTE has no effect on IPv6
sockets.
v2:
- Use two different nettest options for setting SO_DONTROUTE either
on the server or on the client socket.
- Use the above feature to run a single 'nettest -B' instance per
test (instead of having two nettest processes for server and
client).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use ping -r to test the kernel behaviour with raw and ping sockets
having the SO_DONTROUTE option.
Since ipv4_ping_novrf() is called with different values of
net.ipv4.ping_group_range, then it tests both raw and ping sockets
(ping uses ping sockets if its user ID belongs to ping_group_range
and raw sockets otherwise).
With both socket types, sending packets to a neighbour (on link) host,
should work. When the host is behind a router, sending should fail.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use nettest --client-dontroute to test the kernel behaviour with UDP
sockets having the SO_DONTROUTE option. Sending packets to a neighbour
(on link) host, should work. When the host is behind a router, sending
should fail.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use nettest --{client,server}-dontroute to test the kernel behaviour
with TCP sockets having the SO_DONTROUTE option. Sending packets to a
neighbour (on link) host, should work. When the host is behind a
router, sending should fail.
Client and server sockets are tested independently, so that we can
cover different TCP kernel paths.
SO_DONTROUTE also affects the syncookies path. So ipv4_tcp_dontroute()
is made to work with or without syncookies, to cover both paths.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add --client-dontroute and --server-dontroute options to nettest. They
allow to set the SO_DONTROUTE option to the client and server sockets
respectively. This will be used by the following patches to test
the SO_DONTROUTE kernel behaviour with TCP and UDP.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The type of the vlan_proto field is __be16.
And most users of the field use it as such.
In the case of setting or testing the field for the special VLAN_N_VID
value, host byte order is used. Which seems incorrect.
It also seems somewhat odd to store a VLAN ID value in a field that is
otherwise used to store Ether types.
Address this issue by defining BOND_VLAN_PROTO_NONE, a big endian value.
0xffff was chosen somewhat arbitrarily. What is important is that it
doesn't overlap with any valid VLAN Ether types.
I don't believe the problems described above are a bug because
VLAN_N_VID in both little-endian and big-endian byte order does not
conflict with any supported VLAN Ether types in big-endian byte order.
Reported by sparse as:
.../bond_main.c:2857:26: warning: restricted __be16 degrades to integer
.../bond_main.c:2863:20: warning: restricted __be16 degrades to integer
.../bond_main.c:2939:40: warning: incorrect type in assignment (different base types)
.../bond_main.c:2939:40: expected restricted __be16 [usertype] vlan_proto
.../bond_main.c:2939:40: got int
No functional changes intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chuck Lever says:
====================
Bug fixes for net/handshake
Please consider these for merge via net-next.
Paolo observed that there is a possible leak of sock->file. I
haven't looked into that yet, but it seems to be separate from
the fixes in this series, so no need to hold these up.
Changes since v2:
- Address Paolo comment regarding handshake_dup()
Changes since v1:
- Rework "Fix handshake_dup() ref counting"
- Unpin sock->file when a handshake is cancelled
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable the upper layer protocol to specify the SNI peername. This
avoids the need for tlshd to use a DNS lookup, which can return a
hostname that doesn't match the incoming certificate's SubjectName.
Fixes: 2fd5532044 ("net/handshake: Add a kernel API for requesting a TLSv1.3 handshake")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If user space never calls DONE, sock->file's reference count remains
elevated. Enable sock->file to be freed eventually in this case.
Reported-by: Jakub Kacinski <kuba@kernel.org>
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
trace_handshake_cmd_done_err() simply records the pointer in @req,
so initializing it to NULL is sufficient and safe.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If get_unused_fd_flags() fails, we ended up calling fput(sock->file)
twice.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
handshake_req_submit() now verifies that the socket has a file.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The call netdev_{put, hold} of dev_{put, hold} will check NULL,
so there is no need to check before using dev_{put, hold},
remove it to silence the warning:
./drivers/net/ipvlan/ipvlan_core.c:559:3-11: WARNING: NULL check before dev_{put, hold} functions is not needed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4930
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The macsec hardware block supports XPN cipher suites also.
Hence added changes to offload XPN feature. Changes include
configuring SecY policy to XPN cipher suite, Salt and SSCI values.
64 bit packet number is passed instead of 32 bit packet number.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sxgbe_drv_remove() returned zero unconditionally, so it can be converted
to return void without losing anything. The upside is that it becomes
more obvious in its callers that there is no error to handle.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Microchip ENC28J60 SPI Ethernet driver schedules a work item from
the interrupt handler because accesses to the SPI bus may sleep.
On PREEMPT_RT (which forces interrupt handling into threads) this
old-fashioned approach unnecessarily increases latency because an
interrupt results in first waking the interrupt thread, then scheduling
the work item. So, a double indirection to handle an interrupt.
Avoid by converting the driver to modern threaded interrupt handling.
Signed-off-by: Philipp Rosenberger <p.rosenberger@kunbus.com>
Signed-off-by: Zhi Han <hanzhi09@gmail.com>
[lukas: rewrite commit message, linewrap request_threaded_irq() call]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Link: https://lore.kernel.org/r/342380d989ce26bc49f0e5d45fbb0416a5f7809f.1683606193.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For 8852CE, there is abnormal state called CMDPSR_FRZTO,
which occasionally happens in some platforms, and could be
found by firmware and fixed in current SER flow, so we add
suppress function to avoid verbose message for this resolved case.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230508084335.42953-4-pkshih@realtek.com
Newer FW re-design SER (syetem error recovery) L1 (level 1) flow.
New L1 flow will expect two extra states before original L1 flow.
* Before:
fw --- M1 --> driver
fw <-- M2 --- driver
fw --- M3 --> driver
fw <-- M4 --- driver
fw --- M5 --> driver
* After:
fw --- pre-M0 --> driver
fw <-- post-M0 --- driver
fw --- M1 --> driver
fw <-- M2 --- driver
fw --- M3 --> driver
fw <-- M4 --- driver
fw --- M5 --> driver
Then before M1, FW gets one more interval to deal with things that FW
should have handled well. To consider backward/forward compatibility,
FW and driver won't change flow from M1 to M5. (only except that halt
trigger control will change a little bit.) So, there will be two differnt
starting points of SER L1.
* old FW: SER L1 starts from M1
* new FW: SER L1 starts from pre-M0
Then, driver adds the new SER L1 entry and also keep the original one
instead of changing it.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230508084335.42953-3-pkshih@realtek.com
RTL8851B keeps almost the same interrupt flow as RTL8852A and RTL8852B.
But, it uses a different bitmask for interrupt indicator of FW HALT C2H.
So, we make a chip judgement in pci when configuring interrupt mask.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230508084335.42953-2-pkshih@realtek.com
U-NII-4 band, i.e 5.9GHz channels, can be supported by chip 8852C, 8852B
and 8851B. But, it is not supported by chip 8852A. Flag support_unii4 is
added in chip info and defined by chip accordingly to indicate that.
We reference this flag of runtime chip to decide whether to register
5.9GHz channels.
After that, we consider if U-NII-4 band is allowed by our regulatory
rule of U-NII-4. If chip::support_unii4 but not regd::allow_unii4,
we stll do not register 5.9GHz channels.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230508081211.38760-4-pkshih@realtek.com
For realtek regulatory, there are following two kinds of configurations
to determine whether to allow UNII-4 band, i.e. 5.9GHz channels.
1. default setting according to whether chip support it or not
2. evaluate realtek ACPI DSM with RTW89_ACPI_DSM_FUNC_59G_EN (func. 6)
If (1) is false, we won't try (2) and just disallow UNII-4. Otherwise,
if (2) is not supported or returns a non-specific value, we follow the
default setting either. Besides, this commit aims to add decision logic
in rtw89 regulatory. Actually, driver doesn't register UNII-4 yet. That
will be handled by another commit.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230508081211.38760-3-pkshih@realtek.com
Introduce realtek ACPI DSM method to get required BIOS
configurations. It will be used in the following commits.
And, enum rtw89_acpi_dsm_func is added for listing the functions
which are currently recognized.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230508081211.38760-2-pkshih@realtek.com
The type of "mwifiex_adapter->nd_info" is "struct cfg80211_wowlan_nd_info",
not "struct cfg80211_wowlan_nd_match".
Use struct_size() to ease the computation of the needed size.
The current code over-allocates some memory, so is safe.
But it wastes 32 bytes.
Fixes: 7d7f07d8c5 ("mwifiex: add wowlan net-detect support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/7a6074fb056d2181e058a3cc6048d8155c20aec7.1683371982.git.christophe.jaillet@wanadoo.fr
Call mutex_unlock(&rtwdev->mutex); before returning on this error path.
Fixes: f0e741e4dd ("wifi: rtw88: add bitmap for dynamic port settings")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/ddd10a74-5982-4f65-8c59-c1cca558d239@kili.mountain
In recent access points, information element is longer as they include
additional data which exceeds 256 bytes. To accommodate longer
association response, increase the ASSOC response buffer.
Signed-off-by: Amisha Patel <amisha.patel@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230509172811.4953-1-amisha.patel@microchip.com
Mandatory WFA testcase
CT_Security_WPA2Personal_STA_RSNEBoundsVerification-AbsentRSNCap,
performs bounds verfication on Beacon and/or Probe response frames. It
failed and observed the reason to be absence of cipher suite and AKM
suite in RSN information. To fix this, enable the RSN flag before extracting RSN
capabilities.
Fixes: cd21d99e59 ("wifi: wilc1000: validate pairwise and authentication suite offsets")
Signed-off-by: Amisha Patel <amisha.patel@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230421181005.4865-1-amisha.patel@microchip.com
Russell King says:
====================
net: mvneta: reduce size of TSO header allocation
With reference to
https://forum.turris.cz/t/random-kernel-exceptions-on-hbl-tos-7-0/18865/https://github.com/openwrt/openwrt/pull/12375#issuecomment-1528842334
It appears that mvneta attempts an order-6 allocation for the TSO
header memory. While this succeeds early on in the system's life time,
trying order-6 allocations later can result in failure due to memory
fragmentation.
Firstly, the reason it's so large is that we take the number of
transmit descriptors, and allocate a TSO header buffer for each, and
each TSO header is 256 bytes. The driver uses a simple mechanism to
determine the address - it uses the transmit descriptor index as an
index into the TSO header memory.
(The first obvious question is: do there need to be this
many? Won't each TSO header always have at least one bit
of data to go with it? In other words, wouldn't the maximum
number of TSO headers that a ring could accept be the number
of ring entries divided by 2?)
There is no real need for this memory to be an order-6 allocation,
since nothing in hardware requires this buffer to be contiguous.
Therefore, this series splits this order-6 allocation up into 32
order-1 allocations (8k pages on 4k page platforms), each giving
32 TSO headers per page.
In order to do this, these patches:
1) fix a horrible transmit path error-cleanup bug - the existing
code unmaps from the first descriptor that was allocated at
interface bringup, not the first descriptor that the packet
is using, resulting in the wrong descriptors being unmapped.
2) since xdp support was added, we now have buf->type which indicates
what this transmit buffer contains. Use this to mark TSO header
buffers.
3) get rid of IS_TSO_HEADER(), instead using buf->type to determine
whether this transmit buffer needs to be DMA-unmapped.
4) move tso_build_hdr() into mvneta_tso_put_hdr() to keep all the
TSO header building code together.
5) split the TSO header allocation into chunks of order-1 pages.
This has now been tested by the Turris folk and has been found to fix
the allocation error.
====================
Link: https://lore.kernel.org/r/ZFtuhJOC03qpASt2@shell.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we no longer need to check whether the DMA address is within
the TSO header DMA memory range for the queue, we can allocate the TSO
header DMA memory in chunks rather than one contiguous order-6 chunk,
which can stress the kernel's memory subsystems to allocate.
Instead, use order-1 (8k) allocations, which will result in 32 order-1
pages containing 32 TSO headers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move tso_build_hdr() into mvneta_tso_put_hdr() so that all the TSO
header building code is in one place.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we use a different buffer type for TSO headers, we can use
buf->type to determine whether the original buffer was DMA-mapped or
not. The rules are:
MVNETA_TYPE_XDP_TX - from a DMA pool, no unmap is required
MVNETA_TYPE_XDP_NDO - dma_map_single()'d
MVNETA_TYPE_SKB - normal skbuff, dma_map_single()'d
MVNETA_TYPE_TSO - from the TSO buffer area
This means we only need to call dma_unmap_single() on the XDP_NDO and
SKB types of buffer, and we no longer need the private IS_TSO_HEADER()
which relies on the TSO region being contiguously allocated.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Mark dma-mapped skbs and TSO buffers separately, so we can use
buf->type to identify their differences.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The transmit code assumes that the transmit descriptors that are used
begin with the first descriptor in the ring, but this may not be the
case. Fix this by providing a new function that dma-unmaps a range of
numbered descriptor entries, and use that to do the unmapping.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the SYN RTO schedule follows an exponential backoff
scheme, which can be unnecessarily conservative in cases where
there are link failures. In such cases, it's better to
aggressively try to retransmit packets, so it takes routers
less time to find a repath with a working link.
We chose a default value for this sysctl of 4, to follow
the macOS and IOS backoff scheme of 1,1,1,1,1,2,4,8, ...
MacOS and IOS have used this backoff schedule for over
a decade, since before this 2009 IETF presentation
discussed the behavior:
https://www.ietf.org/proceedings/75/slides/tcpm-1.pdf
This commit makes the SYN RTO schedule start with a number of
linear backoffs given by the following sysctl:
* tcp_syn_linear_timeouts
This changes the SYN RTO scheme to be: init_rto_val for
tcp_syn_linear_timeouts, exp backoff starting at init_rto_val
For example if init_rto_val = 1 and tcp_syn_linear_timeouts = 2, our
backoff scheme would be: 1, 1, 1, 2, 4, 8, 16, ...
Signed-off-by: David Morley <morleyd@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Tested-by: David Morley <morleyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230509180558.2541885-1-morleyd.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>