commit 5889d6ede5 upstream.
The code currently leaks the absolute path of the ABI files into the
rendered documentation.
There exists code to prevent this, but it is not effective when an
absolute path is passed, which it is when $srctree is used.
I consider this to be a minimal, stop-gap fix; a better fix would strip
off the actual prefix instead of hacking it off with a regex.
Link: https://mastodon.social/@vegard/111677490643495163
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231231235959.3342928-1-vegard.nossum@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 54a11654de ]
Commit e441273947 ("Documentation: raise minimum supported version of
binutils to 2.25") allows us to remove the checks for old binutils.
There is no more user for ld-ifversion. Remove it as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230119082250.151485-1-masahiroy@kernel.org
Stable-dep-of: 1b1e380026 ("powerpc: add crtsavres.o to always-y instead of extra-y")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit efbd639835 upstream.
GNU's addr2line can have problems parsing a vmlinux built with LLVM,
particularly when LTO was used. In order to decode the traces correctly
this patch adds the ability to switch to LLVM's utilities readelf and
addr2line. The same approach is followed by Will in [1].
Before:
$ scripts/decode_stacktrace.sh vmlinux < kernel.log
[17716.240635] Call trace:
[17716.240646] skb_cow_data (??:?)
[17716.240654] esp6_input (ld-temp.o:?)
[17716.240666] xfrm_input (ld-temp.o:?)
[17716.240674] xfrm6_rcv (??:?)
[...]
After:
$ LLVM=1 scripts/decode_stacktrace.sh vmlinux < kernel.log
[17716.240635] Call trace:
[17716.240646] skb_cow_data (include/linux/skbuff.h:2172 net/core/skbuff.c:4503)
[17716.240654] esp6_input (net/ipv6/esp6.c:977)
[17716.240666] xfrm_input (net/xfrm/xfrm_input.c:659)
[17716.240674] xfrm6_rcv (net/ipv6/xfrm6_input.c:172)
[...]
Note that one could set CROSS_COMPILE=llvm- instead to hack around this
issue. However, doing so can break the decodecode routine as it will
force the selection of other LLVM utilities down the line e.g. llvm-as.
[1] https://lore.kernel.org/all/20230914131225.13415-3-will@kernel.org/
Link: https://lkml.kernel.org/r/20230929034836.403735-1-cmllamas@google.com
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Tested-by: Justin Stitt <justinstitt@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b99f75942 upstream.
v1.25 of pahole supports filtering out functions with multiple inconsistent
function prototypes or optimized-out parameters from the BTF representation.
These present problems because there is no additional info in BTF saying which
inconsistent prototype matches which function instance to help guide attachment,
and functions with optimized-out parameters can lead to incorrect assumptions
about register contents.
So for now, filter out such functions while adding BTF representations for
functions that have "."-suffixes (foo.isra.0) but not optimized-out parameters.
This patch assumes that below linked changes land in pahole for v1.25.
Issues with pahole filtering being too aggressive in removing functions
appear to be resolved now, but CI and further testing will confirm.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230510130241.1696561-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 829649443e ]
There are some wrong return values check in sign-file when call OpenSSL
API. The ERR() check cond is wrong because of the program only check the
return value is < 0 which ignored the return val is 0. For example:
1. CMS_final() return 1 for success or 0 for failure.
2. i2d_CMS_bio_stream() returns 1 for success or 0 for failure.
3. i2d_TYPEbio() return 1 for success and 0 for failure.
4. BIO_free() return 1 for success and 0 for failure.
Link: https://www.openssl.org/docs/manmaster/man3/
Fixes: e5a2e3c847 ("scripts/sign-file.c: Add support for signing with a raw signature")
Signed-off-by: Yusong Gao <a869920004@gmail.com>
Reviewed-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20231213024405.624692-1-a869920004@gmail.com/ # v5
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ee34db3f27 upstream.
All addresses printed by checkstack have an extra incorrect 0 appended at
the end.
This was introduced with commit 677f1410e0 ("scripts/checkstack.pl: don't
display $dre as different entity"): since then the address is taken from
the line which contains the function name, instead of the line which
contains stack consumption. E.g. on s390:
0000000000100a30 <do_one_initcall>:
...
100a44: e3 f0 ff 70 ff 71 lay %r15,-144(%r15)
So the used regex which matches spaces and hexadecimal numbers to extract
an address now matches a different substring. Subsequently replacing spaces
with 0 appends a zero at the and, instead of replacing leading spaces.
Fix this by using the proper regex, and simplify the code a bit.
Link: https://lkml.kernel.org/r/20231120183719.2188479-2-hca@linux.ibm.com
Fixes: 677f1410e0 ("scripts/checkstack.pl: don't display $dre as different entity")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Maninder Singh <maninder1.s@samsung.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Vaneet Narang <v.narang@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8f51593cdc ]
The iglob function, which we use to find C source files in the kernel
tree, always follows symbolic links. This can cause unintentional
recursions whenever a symbolic link points to a parent directory. A
common scenario is building the kernel with the output set to a
directory inside the kernel tree, which will contain such a symlink.
Instead of using the iglob function, use os.walk to traverse the
directory tree, which by default doesn't follow symbolic links. fnmatch
is then used to match the glob on the filename, as well as ignore hidden
files (which were ignored by default with iglob).
This approach runs just as fast as using iglob.
Fixes: b6acf80735 ("dt: Add a check for undocumented compatible strings in kernel")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Closes: https://lore.kernel.org/all/e90cb52f-d55b-d3ba-3933-6cc7b43fcfbc@arm.com
Signed-off-by: "Nícolas F. R. A. Prado" <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20231107225624.9811-1-nfraprado@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb2139fc0d ]
Move the handling of the cfile arguments to a separate generator
function to avoid redundancy.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230828211424.2964562-2-nfraprado@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
Stable-dep-of: 8f51593cdc ("dt: dt-extract-compatibles: Don't follow symlinks when walking tree")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae1eff0349 ]
Currently, sym_validate_range() duplicates the range string using
xstrdup(), which is overwritten by a subsequent sym_calc_value() call.
It results in a memory leak.
Instead, only the pointer should be copied.
Below is a test case, with a summary from Valgrind.
[Test Kconfig]
config FOO
int "foo"
range 10 20
[Test .config]
CONFIG_FOO=0
[Before]
LEAK SUMMARY:
definitely lost: 3 bytes in 1 blocks
indirectly lost: 0 bytes in 0 blocks
possibly lost: 0 bytes in 0 blocks
still reachable: 17,465 bytes in 21 blocks
suppressed: 0 bytes in 0 blocks
[After]
LEAK SUMMARY:
definitely lost: 0 bytes in 0 blocks
indirectly lost: 0 bytes in 0 blocks
possibly lost: 0 bytes in 0 blocks
still reachable: 17,462 bytes in 20 blocks
suppressed: 0 bytes in 0 blocks
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac96a15a0f ]
When MODULE_DEVICE_TABLE(ishtp, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/platform/x86/intel/ishtp_eclite.c
is built as a module for x86.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
MODULE_ALIAS("ishtp:{6A19CC4B-D760-4DE3-B14D-F25EBD0FBCD9}");
However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
MODULE_ALIAS("ishtp:{BD0FBCD9-F25E-B14D-4DE3-D7606A19CC4B}");
This issue has been unnoticed because the x86 kernel is most likely built
natively on an x86 host.
The guid field must not be reversed because guid_t is an array of __u8.
Fixes: fa443bc3c1 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f54e00e58 ]
When MODULE_DEVICE_TABLE(tee, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/char/hw_random/optee-rng.c
is built as a module for ARM little-endian.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:ab7a617c-b8e7-4d8f-8301-d09b61036b64*");
However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:646b0361-9bd0-0183-8f4d-e7b87c617aab*");
The same problem also occurs when you enable CONFIG_CPU_BIG_ENDIAN,
and build it on a little-endian host.
This issue has been unnoticed because the ARM kernel is configured for
little-endian by default, and most likely built on a little-endian host
(cross-build on x86 or native-build on ARM).
The uuid field must not be reversed because uuid_t is an array of __u8.
Fixes: 0fc1db9d10 ("tee: add bus driver framework for TEE based devices")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19bd8981dc ]
kallsyms_seqs_of_names[] records the symbol index sorted by address, the
maximum value in kallsyms_seqs_of_names[] is the number of symbols. And
2^24 = 16777216, which means that three bytes are enough to store the
index. This can help us save (1 * kallsyms_num_syms) bytes of memory.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Stable-dep-of: b022f0c7e4 ("tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbc3d00cf8 ]
Without this 'else' statement, an "usb" name goes into two handlers:
the first/previous 'if' statement _AND_ the for-loop over 'devtable',
but the latter is useless as it has no 'usb' device_id entry anyway.
Tested with allmodconfig before/after patch; no changes to *.mod.c:
git checkout v6.6-rc3
make -j$(nproc) allmodconfig
make -j$(nproc) olddefconfig
make -j$(nproc)
find . -name '*.mod.c' | cpio -pd /tmp/before
# apply patch
make -j$(nproc)
find . -name '*.mod.c' | cpio -pd /tmp/after
diff -r /tmp/before/ /tmp/after/
# no difference
Fixes: acbef7b766 ("modpost: fix module autoloading for OF devices with generic compatible property")
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 233046a2af ]
Commit 3089b2be0c ("kbuild: rpm-pkg: fix build error when _arch is
undefined") does not work as intended; _arch is always defined as
$UTS_MACHINE.
The intention was to define _arch to $UTS_MACHINE only when it is not
defined.
Fixes: 3089b2be0c ("kbuild: rpm-pkg: fix build error when _arch is undefined")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9eb7e20e0c ]
`bindgen`'s output for `libclang`'s version check contains paths, which
in turn may contain strings that look like version numbers [1][2]:
.../6.1.0-dev/.../rust_is_available_bindgen_libclang.h:2:9: warning: clang version 11.1.0 [-W#pragma-messages], err: false
which the script will pick up as the version instead of the latter.
It is also the case that versions may appear after the actual version
(e.g. distribution's version text), which was the reason behind `head` [3]:
.../rust-is-available-bindgen-libclang.h:2:9: warning: clang version 13.0.0 (Fedora 13.0.0-3.fc35) [-W#pragma-messages], err: false
Thus instead ask for a match after the `clang version` string.
Reported-by: Jordan Isaacs <mail@jdisaacs.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/942 [1]
Reported-by: "Ethan D. Twardy" <ethan.twardy@gmail.com>
Closes: https://lore.kernel.org/rust-for-linux/20230528131802.6390-2-ethan.twardy@gmail.com/ [2]
Reported-by: Tiago Lam <tiagolam@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/pull/789 [3]
Fixes: 78521f3399 ("scripts: add `rust_is_available.sh`")
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Ethan Twardy <ethan.twardy@gmail.com>
Tested-by: Ethan Twardy <ethan.twardy@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-8-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52cae7f28e ]
`scripts/rust_is_available.sh` calls `bindgen` with a special
header in order to check whether the `libclang` version in use
is suitable.
However, the invocation itself may fail if, for instance, `bindgen`
cannot locate `libclang`. This is fine for Kconfig (since the
script will still fail and therefore disable Rust as it should),
but it is pretty confusing for users of the `rustavailable` target
given the error will be unrelated:
./scripts/rust_is_available.sh: 21: arithmetic expression: expecting primary: "100000 * + 100 * + "
make: *** [Makefile:1816: rustavailable] Error 2
Instead, run the `bindgen` invocation independently in a previous
step, saving its output and return code. If it fails, then show
the user a proper error message. Otherwise, continue as usual
with the saved output.
Since the previous patch we show a reference to the docs, and
the docs now explain how `bindgen` looks for `libclang`,
thus the error message can leverage the documentation, avoiding
duplication here (and making users aware of the setup guide in
the documentation).
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/rust-for-linux/CAKwvOdm5JT4wbdQQYuW+RT07rCi6whGBM2iUAyg8A1CmLXG6Nw@mail.gmail.com/
Reported-by: François Valenduc <francoisvalenduc@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/934
Reported-by: Alexandru Radovici <msg4alex@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/pull/921
Reported-by: Matthew Leach <dev@mattleach.net>
Closes: https://lore.kernel.org/rust-for-linux/20230507084116.1099067-1-dev@mattleach.net/
Fixes: 78521f3399 ("scripts: add `rust_is_available.sh`")
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-6-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dee3a6b819 ]
rust_is_available.sh uses cc-version.sh to identify which C compiler is
in use, as scripts/Kconfig.include does. cc-version.sh isn't designed to
be able to handle multiple arguments in one variable, i.e. "ccache clang".
Its invocation in rust_is_available.sh quotes "$CC", which makes
$1 == "ccache clang" instead of the intended $1 == ccache & $2 == clang.
cc-version.sh could also be changed to handle having "ccache clang" as one
argument, but it only has the one consumer upstream, making it simpler to
fix the caller here.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Fixes: 78521f3399 ("scripts: add `rust_is_available.sh`")
Link: https://github.com/Rust-for-Linux/linux/pull/873
[ Reworded title prefix and reflow line to 75 columns. ]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d824d2f985 ]
The -v option is passed when this script is invoked from Makefile,
but not when invoked from Kconfig.
As you can see in scripts/Kconfig.include, the 'success' macro suppresses
stdout and stderr anyway, so this script does not need to be quiet.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230109061436.3146442-1-masahiroy@kernel.org
[ Reworded prefix to match the others in the patch series. ]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Stable-dep-of: dee3a6b819 ("kbuild: rust_is_available: fix version check when CC has multiple arguments")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e6a71160cc upstream.
The gimple-iterator.h header must be included before gimple-fold.h
starting with GCC 13. Reorganize gimple headers to work for all GCC
versions.
Reported-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/all/20230113173033.4380-1-palmer@rivosinc.com/
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 79549da691 upstream.
Commit 010a0aad39 ("kallsyms: Correctly sequence symbols when
CONFIG_LTO_CLANG=y") added --lto-clang, and updated the usage()
function, but not the comment. Update it in the same way.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit adc40221bf upstream.
The comment in scripts/kallsyms.c describing the usage of
scripts/kallsyms does not reflect the latest implementation.
Fix the comment to be equivalent to what the usage() function prints.
Signed-off-by: Yuma Ueda <cyan@0x00a1e9.dev>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20221118133631.4554-1-cyan@0x00a1e9.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ced0f245ed upstream.
My randconfig build setup ran into another kallsyms warning:
Inconsistent kallsyms data
Try make KALLSYMS_EXTRA_PASS=1 as a workaround
After adding some debugging code to kallsyms.c, I saw that the recently
added kallsyms_seqs_of_names symbol can sometimes cause the second stage
table to be slightly longer than the first stage, which makes the
build inconsistent.
Add it to the exception table that contains all other kallsyms-generated
symbols.
Fixes: 60443c88f3 ("kallsyms: Improve the performance of kallsyms_lookup_name()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8cc32a9bbf ]
Commit 6eb4bd92c1 ("kallsyms: strip LTO suffixes from static functions")
stripped all function/variable suffixes started with '.' regardless
of whether those suffixes are generated at LTO mode or not. In fact,
as far as I know, in LTO mode, when a static function/variable is
promoted to the global scope, '.llvm.<...>' suffix is added.
The existing mechanism breaks live patch for a LTO kernel even if
no <symbol>.llvm.<...> symbols are involved. For example, for the following
kernel symbols:
$ grep bpf_verifier_vlog /proc/kallsyms
ffffffff81549f60 t bpf_verifier_vlog
ffffffff8268b430 d bpf_verifier_vlog._entry
ffffffff8282a958 d bpf_verifier_vlog._entry_ptr
ffffffff82e12a1f d bpf_verifier_vlog.__already_done
'bpf_verifier_vlog' is a static function. '_entry', '_entry_ptr' and
'__already_done' are static variables used inside 'bpf_verifier_vlog',
so llvm promotes them to file-level static with prefix 'bpf_verifier_vlog.'.
Note that the func-level to file-level static function promotion also
happens without LTO.
Given a symbol name 'bpf_verifier_vlog', with LTO kernel, current mechanism will
return 4 symbols to live patch subsystem which current live patching
subsystem cannot handle it. With non-LTO kernel, only one symbol
is returned.
In [1], we have a lengthy discussion, the suggestion is to separate two
cases:
(1). new symbols with suffix which are generated regardless of whether
LTO is enabled or not, and
(2). new symbols with suffix generated only when LTO is enabled.
The cleanup_symbol_name() should only remove suffixes for case (2).
Case (1) should not be changed so it can work uniformly with or without LTO.
This patch removed LTO-only suffix '.llvm.<...>' so live patching and
tracing should work the same way for non-LTO kernel.
The cleanup_symbol_name() in scripts/kallsyms.c is also changed to have the same
filtering pattern so both kernel and kallsyms tool have the same
expectation on the order of symbols.
[1] https://lore.kernel.org/live-patching/20230615170048.2382735-1-song@kernel.org/T/#u
Fixes: 6eb4bd92c1 ("kallsyms: strip LTO suffixes from static functions")
Reported-by: Song Liu <song@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230628181926.4102448-1-yhs@fb.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 010a0aad39 ]
LLVM appends various suffixes for local functions and variables, suffixes
observed:
- foo.llvm.[0-9a-f]+
- foo.[0-9a-f]+
Therefore, when CONFIG_LTO_CLANG=y, kallsyms_lookup_name() needs to
truncate the suffix of the symbol name before comparing the local function
or variable name.
Old implementation code:
- if (strcmp(namebuf, name) == 0)
- return kallsyms_sym_address(i);
- if (cleanup_symbol_name(namebuf) && strcmp(namebuf, name) == 0)
- return kallsyms_sym_address(i);
The preceding process is traversed by address from low to high. That is,
for those with the same name after the suffix is removed, the one with
the smallest address is returned first. Therefore, when sorting in the
tool, if the raw names are the same, they should be sorted by address in
ascending order.
ASCII[.] = 2e
ASCII[0-9] = 30,39
ASCII[A-Z] = 41,5a
ASCII[_] = 5f
ASCII[a-z] = 61,7a
According to the preceding ASCII code values, the following sorting result
is strictly followed.
---------------------------------
| main-key | sub-key |
|---------------------------------|
| | addr_lowest |
| <name> | ... |
| <name>.<suffix> | ... |
| | addr_highest |
|---------------------------------|
| <name>?<others> | | //? is [_A-Za-z0-9]
---------------------------------
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Stable-dep-of: 8cc32a9bbf ("kallsyms: strip LTO-only suffixes from promoted global functions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60443c88f3 ]
Currently, to search for a symbol, we need to expand the symbols in
'kallsyms_names' one by one, and then use the expanded string for
comparison. It's O(n).
If we sort names in ascending order like addresses, we can also use
binary search. It's O(log(n)).
In order not to change the implementation of "/proc/kallsyms", the table
kallsyms_names[] is still stored in a one-to-one correspondence with the
address in ascending order.
Add array kallsyms_seqs_of_names[], it's indexed by the sequence number
of the sorted names, and the corresponding content is the sequence number
of the sorted addresses. For example:
Assume that the index of NameX in array kallsyms_seqs_of_names[] is 'i',
the content of kallsyms_seqs_of_names[i] is 'k', then the corresponding
address of NameX is kallsyms_addresses[k]. The offset in kallsyms_names[]
is get_symbol_offset(k).
Note that the memory usage will increase by (4 * kallsyms_num_syms)
bytes, the next two patches will reduce (1 * kallsyms_num_syms) bytes
and properly handle the case CONFIG_LTO_CLANG=y.
Performance test results: (x86)
Before:
min=234, max=10364402, avg=5206926
min=267, max=11168517, avg=5207587
After:
min=1016, max=90894, avg=7272
min=1014, max=93470, avg=7293
The average lookup performance of kallsyms_lookup_name() improved 715x.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Stable-dep-of: 8cc32a9bbf ("kallsyms: strip LTO-only suffixes from promoted global functions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25a21fbb93 ]
With GCOV_PROFILE_ALL, Clang injects __llvm_gcov_* functions to each
object file, including the *.mod.o. As we filter out CC_FLAGS_CFI
for *.mod.o, the compiler won't generate type hashes for the
injected functions, and therefore indirectly calling them during
module loading trips indirect call checking.
Enabling CFI for *.mod.o isn't sufficient to fix this issue after
commit 0c3e806ec0 ("x86/cfi: Add boot time hash randomization"),
as *.mod.o aren't processed by objtool, which means any hashes
emitted there won't be randomized. Therefore, in addition to
disabling CFI for *.mod.o, also disable GCOV, as the object files
don't otherwise contain any executable code.
Fixes: cf68fffb66 ("add support for Clang CFI")
Reported-by: Joe Fradley <joefradley@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a3f1e573a ]
The > comparison should be >= to prevent an out of bounds array
access.
Fixes: 52dc0595d5 ("modpost: handle relocations mismatch in __ex_table.")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56a24b8ce6 ]
addend_arm_rel() processes R_ARM_PC24, R_ARM_CALL, R_ARM_JUMP24 in a
wrong way.
Here, test code.
[test code for R_ARM_JUMP24]
.section .init.text,"ax"
bar:
bx lr
.section .text,"ax"
.globl foo
foo:
b bar
[test code for R_ARM_CALL]
.section .init.text,"ax"
bar:
bx lr
.section .text,"ax"
.globl foo
foo:
push {lr}
bl bar
pop {pc}
If you compile it with ARM multi_v7_defconfig, modpost will show the
symbol name, (unknown).
WARNING: modpost: vmlinux.o: section mismatch in reference: foo (section: .text) -> (unknown) (section: .init.text)
(You need to use GNU linker instead of LLD to reproduce it.)
Fix the code to make modpost show the correct symbol name.
I imported (with adjustment) sign_extend32() from include/linux/bitops.h.
The '+8' is the compensation for pc-relative instruction. It is
documented in "ELF for the Arm Architecture" [1].
"If the relocation is pc-relative then compensation for the PC bias
(the PC value is 8 bytes ahead of the executing instruction in Arm
state and 4 bytes in Thumb state) must be encoded in the relocation
by the object producer."
[1]: https://github.com/ARM-software/abi-aa/blob/main/aaelf32/aaelf32.rst
Fixes: 56a974fa2d ("kbuild: make better section mismatch reports on arm")
Fixes: 6e2e340b59 ("ARM: 7324/1: modpost: Fix section warnings for ARM for many compilers")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7c63520f6 ]
addend_arm_rel() processes R_ARM_ABS32 in a wrong way.
Here, test code.
[test code 1]
#include <linux/init.h>
int __initdata foo;
int get_foo(void) { return foo; }
If you compile it with ARM versatile_defconfig, modpost will show the
symbol name, (unknown).
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> (unknown) (section: .init.data)
(You need to use GNU linker instead of LLD to reproduce it.)
If you compile it for other architectures, modpost will show the correct
symbol name.
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data)
For R_ARM_ABS32, addend_arm_rel() sets r->r_addend to a wrong value.
I just mimicked the code in arch/arm/kernel/module.c.
However, there is more difficulty for ARM.
Here, test code.
[test code 2]
#include <linux/init.h>
int __initdata foo;
int get_foo(void) { return foo; }
int __initdata bar;
int get_bar(void) { return bar; }
With this commit applied, modpost will show the following messages
for ARM versatile_defconfig:
WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data)
WARNING: modpost: vmlinux.o: section mismatch in reference: get_bar (section: .text) -> foo (section: .init.data)
The reference from 'get_bar' to 'foo' seems wrong.
I have no solution for this because it is true in assembly level.
In the following output, relocation at 0x1c is no longer associated
with 'bar'. The two relocation entries point to the same symbol, and
the offset to 'bar' is encoded in the instruction 'r0, [r3, #4]'.
Disassembly of section .text:
00000000 <get_foo>:
0: e59f3004 ldr r3, [pc, #4] @ c <get_foo+0xc>
4: e5930000 ldr r0, [r3]
8: e12fff1e bx lr
c: 00000000 .word 0x00000000
00000010 <get_bar>:
10: e59f3004 ldr r3, [pc, #4] @ 1c <get_bar+0xc>
14: e5930004 ldr r0, [r3, #4]
18: e12fff1e bx lr
1c: 00000000 .word 0x00000000
Relocation section '.rel.text' at offset 0x244 contains 2 entries:
Offset Info Type Sym.Value Sym. Name
0000000c 00000c02 R_ARM_ABS32 00000000 .init.data
0000001c 00000c02 R_ARM_ABS32 00000000 .init.data
When find_elf_symbol() gets into a situation where relsym->st_name is
zero, there is no guarantee to get the symbol name as written in C.
I am keeping the current logic because it is useful in many architectures,
but the symbol name is not always correct depending on the optimization.
I left some comments in find_tosym().
Fixes: 56a974fa2d ("kbuild: make better section mismatch reports on arm")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0acc76a49 ]
find_extable_entry_size() is completely broken. It has awesome comments
about how to calculate sizeof(struct exception_table_entry).
It was based on these assumptions:
- struct exception_table_entry has two fields
- both of the fields have the same size
Then, we came up with this equation:
(offset of the second field) * 2 == (size of struct)
It was true for all architectures when commit 52dc0595d5 ("modpost:
handle relocations mismatch in __ex_table.") was applied.
Our mathematics broke when commit 548acf1923 ("x86/mm: Expand the
exception table logic to allow new handling options") introduced the
third field.
Now, the definition of exception_table_entry is highly arch-dependent.
For x86, sizeof(struct exception_table_entry) is apparently 12, but
find_extable_entry_size() sets extable_entry_size to 8.
I could fix it, but I do not see much value in this code.
extable_entry_size is used just for selecting a slightly different
error message.
If the first field ("insn") references to a non-executable section,
The relocation at %s+0x%lx references
section "%s" which is not executable, IOW
it is not possible for the kernel to fault
at that address. Something is seriously wrong
and should be fixed.
If the second field ("fixup") references to a non-executable section,
The relocation at %s+0x%lx references
section "%s" which is not executable, IOW
the kernel will fault if it ever tries to
jump to it. Something is seriously wrong
and should be fixed.
Merge the two error messages rather than adding even more complexity.
Change fatal() to error() to make it continue running and catch more
possible errors.
Fixes: 548acf1923 ("x86/mm: Expand the exception table logic to allow new handling options")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e1b37563ca upstream.
gtags considers any file outside of its current working directory
"outside the source tree" and refuses to index it. For O= kernel builds,
or when "make" is invoked from a directory other then the kernel source
tree, gtags ignores the entire kernel source and generates an empty
index.
Force-set gtags current working directory to the kernel source tree.
Due to commit 9da0763bdd ("kbuild: Use relative path when building in
a subdir of the source tree"), if the kernel build is done in a
sub-directory of the kernel source tree, the kernel Makefile will set
the kernel's $srctree to ".." for shorter compile-time and run-time
warnings. Consequently, the list of files to be indexed will be in the
"../*" form, rendering all such paths invalid once gtags switches to the
kernel source tree as its current working directory.
If gtags indexing is requested and the build directory is not the kernel
source tree, index all files in absolute-path form.
Note, indexing in absolute-path form will not affect the generated
index, as paths in gtags indices are always relative to the gtags "root
directory" anyway (as evidenced by "gtags --dump").
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5c8d6e0fa upstream.
as-instr uses KBUILD_AFLAGS, but as-option uses KBUILD_CFLAGS. This can
cause as-option to fail unexpectedly when CONFIG_WERROR is set, because
clang will emit -Werror,-Wunused-command-line-argument for various -m
and -f flags in KBUILD_CFLAGS for assembler sources.
Callers of as-option and as-instr should be adding flags to
KBUILD_AFLAGS / aflags-y, not KBUILD_CFLAGS / cflags-y. Use
KBUILD_AFLAGS in all macros to clear up the initial problem.
Unfortunately, -Wunused-command-line-argument can still be triggered
with clang by the presence of warning flags or macro definitions because
'-x assembler' is used, instead of '-x assembler-with-cpp', which will
consume these flags. Switch to '-x assembler-with-cpp' in places where
'-x assembler' is used, as the compiler is always used as the driver for
out of line assembler sources in the kernel.
Finally, add -Werror to these macros so that they behave consistently
whether or not CONFIG_WERROR is set.
[nathan: Reworded and expanded on problems in commit message
Use '-x assembler-with-cpp' in a couple more places]
Link: https://github.com/ClangBuiltLinux/linux/issues/1699
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7362042f35 upstream.
Below incompatibilities between Python2 and Python3 made lx-timerlist fail
to run under Python3.
o xrange() is replaced by range() in Python3
o bytes and str are different types in Python3
o the return value of Inferior.read_memory() is memoryview object in
Python3
akpm: cc stable so that older kernels are properly debuggable under newer
Python.
Link: https://lkml.kernel.org/r/TYCP286MB2146EE1180A4D5176CBA8AB2C6819@TYCP286MB2146.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8af055ae25 ]
If CONFIG_DEBUG_INFO_REDUCED is enabled in the kernel configuration, we
will typically not be able to load vmlinux-gdb.py and will fail with:
Traceback (most recent call last):
File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/vmlinux-gdb.py", line 25, in <module>
import linux.utils
File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/scripts/gdb/linux/utils.py", line 131, in <module>
atomic_long_counter_offset = atomic_long_type.get_type()['counter'].bitpos
KeyError: 'counter'
Rather be left wondering what is happening only to find out that reduced
debug information is the cause, raise an eror. This was not typically a
problem until e3c8d33e0d ("scripts/gdb: fix 'lx-dmesg' on 32 bits arch")
but it has since then.
Link: https://lkml.kernel.org/r/20230406215252.1580538-1-f.fainelli@gmail.com
Fixes: e3c8d33e0d ("scripts/gdb: fix 'lx-dmesg' on 32 bits arch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Antonio Borneo <antonio.borneo@foss.st.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f19c3c2959 ]
Avoid generating an exception if there are no generic power domain(s)
registered:
(gdb) lx-genpd-summary
domain status children
/device runtime status
----------------------------------------------------------------------
Python Exception <class 'gdb.error'>: No symbol "gpd_list" in current context.
Error occurred in Python: No symbol "gpd_list" in current context.
(gdb) quit
[f.fainelli@gmail.com: correctly invoke gdb_eval_or_none]
Link: https://lkml.kernel.org/r/20230327185746.3856407-1-f.fainelli@gmail.com
Link: https://lkml.kernel.org/r/20230323231659.3319941-1-f.fainelli@gmail.com
Fixes: 8207d4a88e ("scripts/gdb: add lx-genpd-summary command")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d7adbc74c ]
Avoid generating an exception if there are no clocks registered:
(gdb) lx-clk-summary
enable prepare protect
clock count count count rate
------------------------------------------------------------------------
Python Exception <class 'gdb.error'>: No symbol "clk_root_list" in
current context.
Error occurred in Python: No symbol "clk_root_list" in current context.
Link: https://lkml.kernel.org/r/20230323225246.3302977-1-f.fainelli@gmail.com
Fixes: d1e9710b63 ("scripts/gdb: initial clk support: lx-clk-summary")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5a43001c01 upstream.
It seems there is a misprint in the check of strdup() return code that
can lead to NULL pointer dereference.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 4520c6a49a ("X.509: Add simple ASN.1 grammar compiler")
Signed-off-by: Ekaterina Orlova <vorobushek.ok@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: keyrings@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Link: https://lore.kernel.org/r/20230315172130.140-1-vorobushek.ok@gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb27e70f6e upstream.
modpost now reads CRCs from .*.cmd files, parsing them using strtol().
This is inconsistent with its parsing of Module.symvers and with their
definition as *unsigned* 32-bit values.
strtol() clamps values to [LONG_MIN, LONG_MAX], and when building on a
32-bit system this changes all CRCs >= 0x80000000 to be 0x7fffffff.
Change extract_crcs_for_object() to use strtoul() instead.
Cc: stable@vger.kernel.org
Fixes: f292d875d0 ("modpost: extract symbol versions from *.cmd files")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ee06a3ef7e ]
Prior to commit 5ee5465940 ("kconfig: change sym_change_count to a
boolean flag"), the conf_updated flag was set to the new value *before*
calling the callback. xconfig's save action depends on this behaviour,
because xconfig calls conf_get_changed() directly from the callback and
now sees the old value, thus never enabling the save button or the
shortcut.
Restore the previous behaviour.
Fixes: 5ee5465940 ("kconfig: change sym_change_count to a boolean flag")
Signed-off-by: Jurica Vukadin <jura@vukad.in>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87c7ee67de ]
In the follow-up of commit fb3041d61f ("kbuild: fix SIGPIPE error
message for AR=gcc-ar and AR=llvm-ar"), Kees Cook pointed out that
tools should _not_ catch their own SIGPIPEs [1] [2].
Based on his feedback, LLVM was fixed [3].
However, Python's default behavior is to show noisy bracktrace when
SIGPIPE is sent. So, scripts written in Python are basically in the
same situation as the buggy llvm tools.
Example:
$ make -s allnoconfig
$ make -s allmodconfig
$ scripts/diffconfig .config.old .config | head -n1
-ALIX n
Traceback (most recent call last):
File "/home/masahiro/linux/scripts/diffconfig", line 132, in <module>
main()
File "/home/masahiro/linux/scripts/diffconfig", line 130, in main
print_config("+", config, None, b[config])
File "/home/masahiro/linux/scripts/diffconfig", line 64, in print_config
print("+%s %s" % (config, new_value))
BrokenPipeError: [Errno 32] Broken pipe
Python documentation [4] notes how to make scripts die immediately and
silently:
"""
Piping output of your program to tools like head(1) will cause a
SIGPIPE signal to be sent to your process when the receiver of its
standard output closes early. This results in an exception like
BrokenPipeError: [Errno 32] Broken pipe. To handle this case,
wrap your entry point to catch this exception as follows:
import os
import sys
def main():
try:
# simulate large output (your code replaces this loop)
for x in range(10000):
print("y")
# flush output here to force SIGPIPE to be triggered
# while inside this try block.
sys.stdout.flush()
except BrokenPipeError:
# Python flushes standard streams on exit; redirect remaining output
# to devnull to avoid another BrokenPipeError at shutdown
devnull = os.open(os.devnull, os.O_WRONLY)
os.dup2(devnull, sys.stdout.fileno())
sys.exit(1) # Python exits with error code 1 on EPIPE
if __name__ == '__main__':
main()
Do not set SIGPIPE’s disposition to SIG_DFL in order to avoid
BrokenPipeError. Doing that would cause your program to exit
unexpectedly whenever any socket connection is interrupted while
your program is still writing to it.
"""
Currently, tools/perf/scripts/python/intel-pt-events.py seems to be the
only script that fixes the issue that way.
tools/perf/scripts/python/compaction-times.py uses another approach
signal.signal(signal.SIGPIPE, signal.SIG_DFL) but the Python
documentation clearly says "Don't do it".
I cannot fix all Python scripts since there are so many.
I fixed some in the scripts/ directory.
[1]: https://lore.kernel.org/all/202211161056.1B9611A@keescook/
[2]: https://github.com/llvm/llvm-project/issues/59037
[3]: 4787efa380
[4]: https://docs.python.org/3/library/signal.html#note-on-sigpipe
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a6b64adc1 ]
The latest GCC 13 snapshot (13.0.1 20230129) gives the following:
```
cc1: error: cannot load plugin ./scripts/gcc-plugins/randomize_layout_plugin.so
:./scripts/gcc-plugins/randomize_layout_plugin.so: undefined symbol: tree_code_type
```
This ends up being because of https://gcc.gnu.org/git/gitweb.cgi?p=gcc.git;h=b0241ce6e37031
upstream in GCC which changes the visibility of some types used by the kernel's
plugin infrastructure like tree_code_type.
After discussion with the GCC folks, we found that the kernel needs to be building
plugins with the same flags used to build GCC - and GCC defaults to gnu++17
right now. The minimum GCC version needed to build the kernel is GCC 5.1
and GCC 5.1 already defaults to gnu++14 anyway, so just drop the flag, as
all GCCs that could be used to build GCC already default to an acceptable
version which was >= the version we forced via flags until now.
Bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108634
Signed-off-by: Sam James <sam@gentoo.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230201230009.2252783-1-sam@gentoo.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9f9cf2560 ]
For each binary Debian package, a directory with the package name is
created in the debian directory. Correct the generated file matches in the
package's clean target, which were renamed without adjusting the target.
Fixes: 1694e94e4f ("builddeb: match temporary directory name to the package name")
Signed-off-by: Bastian Germann <bage@linutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6ec363fc61 upstream.
Starting with release 10.38 PCRE2 drops default support for using \K in
lookaround patterns as described in [1]. Unfortunately, scripts/tags.sh
relies on such functionality to collect all_compiled_soures() leading to
the following error:
$ make COMPILED_SOURCE=1 tags
GEN tags
grep: \K is not allowed in lookarounds (but see PCRE2_EXTRA_ALLOW_LOOKAROUND_BSK)
The usage of \K for this pattern was introduced in commit 4f491bb6ea
("scripts/tags.sh: collect compiled source precisely") which speeds up
the generation of tags significantly.
In order to fix this issue without compromising the performance we can
switch over to an equivalent sed expression. The same matching pattern
is preserved here except \K is replaced with a backreference \1.
[1] https://www.pcre.org/current/doc/html/pcre2syntax.html#SEC11
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Jialu Xu <xujialu@vimux.org>
Cc: Vipin Sharma <vipinsh@google.com>
Cc: stable@vger.kernel.org
Fixes: 4f491bb6ea ("scripts/tags.sh: collect compiled source precisely")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20230215183850.3353198-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 994b7ac169 upstream.
In the previous discussion (see the Link tag), Ard pointed out that
arm/arm64/kernel/head.o does not need any special treatment - the only
piece that must appear right at the start of the binary image is the
image header which is emitted into .head.text.
The linker script does the right thing to do. The build system does
not need to manipulate the link order of head.o.
Link: https://lore.kernel.org/lkml/CAMj1kXH77Ja8bSsq2Qj8Ck9iSZKw=1F8Uy-uAWGVDm4-CG=EuA@mail.gmail.com/
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Link: https://lore.kernel.org/r/20221012233500.156764-1-masahiroy@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2348e6bf44 upstream.
arch/riscv/kernel/head.o does not need any special treatment - the only
requirement is the ".head.text" section must be placed before the
normal ".text" section.
The linker script does the right thing to do. The build system does
not need to manipulate the link order of head.o.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20221018141200.1040-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
