The AA64ZFR0_EL1 accessors are just the general accessors with
its visibility function open-coded. It also skips the if-else
chain in read_id_reg, but there's no reason not to go there.
Indeed consolidating ID register accessors and removing lines
of code make it worthwhile.
Remove the AA64ZFR0_EL1 accessors, replacing them with the
general accessors for sanitized ID registers.
No functional change intended.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201105091022.15373-5-drjones@redhat.com
The instruction encodings of ID registers are preallocated. Until an
encoding is assigned a purpose the register is RAZ. KVM's general ID
register accessor functions already support both paths, RAZ or not.
If for each ID register we can determine if it's RAZ or not, then all
ID registers can build on the general functions. The register visibility
function allows us to check whether a register should be completely
hidden or not, extending it to also report when the register should
be RAZ or not allows us to use it for ID registers as well.
Check for RAZ visibility in the ID register accessor functions,
allowing the RAZ case to be handled in a generic way for all system
registers.
The new REG_RAZ flag will be used in a later patch. This patch has
no intended functional change.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201105091022.15373-4-drjones@redhat.com
REG_HIDDEN_GUEST and REG_HIDDEN_USER are always used together.
Consolidate them into a single REG_HIDDEN flag. We can always
add another flag later if some register needs to expose itself
differently to the guest than it does to userspace.
No functional change intended.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201105091022.15373-3-drjones@redhat.com
ID registers are RAZ until they've been allocated a purpose, but
that doesn't mean they should be removed from the KVM_GET_REG_LIST
list. So far we only have one register, SYS_ID_AA64ZFR0_EL1, that
is hidden from userspace when its function, SVE, is not present.
Expose SYS_ID_AA64ZFR0_EL1 to userspace as RAZ when SVE is not
implemented. Removing the userspace visibility checks is enough
to reexpose it, as it will already return zero to userspace when
SVE is not present. The register already behaves as RAZ for the
guest when SVE is not present.
Fixes: 73433762fc ("KVM: arm64/sve: System register context switch and access support")
Reported-by: 张东旭 <xu910121@sina.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org#v5.2+
Link: https://lore.kernel.org/r/20201105091022.15373-2-drjones@redhat.com
The PUD and PMD are folded into PGD when the following options are
enabled. In that case, PUD_SHIFT is equal to PMD_SHIFT and we fail
to build with the indicated errors:
CONFIG_ARM64_VA_BITS_42=y
CONFIG_ARM64_PAGE_SHIFT=16
CONFIG_PGTABLE_LEVELS=3
arch/arm64/kvm/mmu.c: In function ‘user_mem_abort’:
arch/arm64/kvm/mmu.c:798:2: error: duplicate case value
case PMD_SHIFT:
^~~~
arch/arm64/kvm/mmu.c:791:2: note: previously used here
case PUD_SHIFT:
^~~~
This fixes the issue by skipping the check on PUD huge page when PUD
and PMD are folded into PGD.
Fixes: 2f40c46021 ("KVM: arm64: Use fallback mapping sizes for contiguous huge page sizes")
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201103003009.32955-1-gshan@redhat.com
On a system without uniform support for AArch32 at EL0, it is possible
for the guest to force run AArch32 at EL0 and potentially cause an
illegal exception if running on a core without AArch32. Add an extra
check so that if we catch the guest doing that, then we prevent it from
running again by resetting vcpu->arch.target and return
ARM_EXCEPTION_IL.
We try to catch this misbehaviour as early as possible and not rely on
an illegal exception occuring to signal the problem. Attempting to run a
32bit app in the guest will produce an error from QEMU if the guest
exits while running in AArch32 EL0.
Tested on Juno by instrumenting the host to fake asym aarch32 and
instrumenting KVM to make the asymmetry visible to the guest.
[will: Incorporated feedback from Marc]
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201021104611.2744565-2-qais.yousef@arm.com
Link: https://lore.kernel.org/r/20201027215118.27003-2-will@kernel.org
VFIO allows a device driver to resolve a fault by mapping a MMIO
range. This can be subsequently result in user_mem_abort() to
try and compute a huge mapping based on the MMIO pfn, which is
a sure recipe for things to go wrong.
Instead, force a PTE mapping when the pfn faulted in has a device
mapping.
Fixes: 6d674e28f6 ("KVM: arm/arm64: Properly handle faulting of device mappings")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Santosh Shukla <sashukla@nvidia.com>
[maz: rewritten commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1603711447-11998-2-git-send-email-sashukla@nvidia.com
Although huge pages can be created out of multiple contiguous PMDs
or PTEs, the corresponding sizes are not supported at Stage-2 yet.
Instead of failing the mapping, fall back to the nearer supported
mapping size (CONT_PMD to PMD and CONT_PTE to PTE respectively).
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
[maz: rewritten commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201025230626.18501-1-gshan@redhat.com
stage2_pte_cacheable() tries to figure out whether the mapping installed
in its 'pte' parameter is cacheable or not. Unfortunately, it fails
miserably because it extracts the memory attributes from the entry using
FIELD_GET(), which returns the attributes shifted down to bit 0, but then
compares this with the unshifted value generated by the PAGE_S2_MEMATTR()
macro.
A direct consequence of this bug is that cache maintenance is silently
skipped, which in turn causes 32-bit guests to crash early on when their
set/way maintenance is trapped but not emulated correctly.
Fix the broken masks by avoiding the use of FIELD_GET() altogether.
Fixes: 6d9d2115c4 ("KVM: arm64: Add support for stage-2 map()/unmap() in generic page-table")
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20201029144716.30476-1-will@kernel.org
The DBGD{CCINT,SCRext} and DBGVCR register entries in the cp14 array
are missing their target register, resulting in all accesses being
targetted at the guard sysreg (indexed by __INVALID_SYSREG__).
Point the emulation code at the actual register entries.
Fixes: bdfb4b389c ("arm64: KVM: add trap handlers for AArch32 debug registers")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201029172409.2768336-1-maz@kernel.org
For consistency with the rest of the stage-2 page-table page allocations
(performing using a kvm_mmu_memory_cache), ensure that __GFP_ACCOUNT is
included in the GFP flags for the PGD pages.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20201026144423.24683-1-will@kernel.org
Setting PSTATE.PAN when entering EL2 on nVHE doesn't make much
sense as this bit only means something for translation regimes
that include EL0. This obviously isn't the case in the nVHE case,
so let's drop this setting.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Link: https://lore.kernel.org/r/20201026095116.72051-4-maz@kernel.org
The new calling convention says that pointers coming from the SMCCC
interface are turned into their HYP version in the host HVC handler.
However, there is still a stray kern_hyp_va() in the TLB invalidation
code, which could result in a corrupted pointer.
Drop the spurious conversion.
Fixes: a071261d93 ("KVM: arm64: nVHE: Fix pointers during SMCCC convertion")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201026095116.72051-3-maz@kernel.org
The hyp-init code starts by stashing a register in TPIDR_EL2
in in order to free a register. This happens no matter if the
HVC call is legal or not.
Although nothing wrong seems to come out of it, it feels odd
to alter the EL2 state for something that eventually returns
an error.
Instead, use the fact that we know exactly which bits of the
__kvm_hyp_init call are non-zero to perform the check with
a series of EOR/ROR instructions, combined with a build-time
check that the value is the one we expect.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201026095116.72051-2-maz@kernel.org
If a change in the MMU notifier sequence number forces user_mem_abort()
to return early when attempting to handle a stage-2 fault, we return
uninitialised stack to kvm_handle_guest_abort(), which could potentially
result in the injection of an external abort into the guest or a spurious
return to userspace. Neither or these are what we want to do.
Initialise 'ret' to 0 in user_mem_abort() so that bailing due to a
change in the MMU notrifier sequence number is treated as though the
fault was handled.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20200930102442.16142-1-will@kernel.org
Alex pointed out that we don't pass a level hint to the TLBI instruction
when handling a stage-2 permission fault, even though the walker does
at some point have the level information in its hands.
Rework stage2_update_leaf_attrs() so that it can optionally return the
level of the updated pte to its caller, which can in turn be used to
provide the correct TLBI level hint.
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/595cc73e-636e-8b3a-f93a-b4e9fb218db8@arm.com
Link: https://lore.kernel.org/r/20200930131801.16889-1-will@kernel.org
With all nVHE per-CPU variables being part of the hyp per-CPU region,
mapping them individual is not necessary any longer. They are mapped to hyp
as part of the overall per-CPU region.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Andrew Scull <ascull@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-11-dbrazdil@google.com
Add hyp percpu section to linker script and rename the corresponding ELF
sections of hyp/nvhe object files. This moves all nVHE-specific percpu
variables to the new hyp percpu section.
Allocate sufficient amount of memory for all percpu hyp regions at global KVM
init time and create corresponding hyp mappings.
The base addresses of hyp percpu regions are kept in a dynamically allocated
array in the kernel.
Add NULL checks in PMU event-reset code as it may run before KVM memory is
initialized.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-10-dbrazdil@google.com
Host CPU context is stored in a global per-cpu variable `kvm_host_data`.
In preparation for introducing independent per-CPU region for nVHE hyp,
create two separate instances of `kvm_host_data`, one for VHE and one
for nVHE.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-9-dbrazdil@google.com
Hyp keeps track of which cores require SSBD callback by accessing a
kernel-proper global variable. Create an nVHE symbol of the same name
and copy the value from kernel proper to nVHE as KVM is being enabled
on a core.
Done in preparation for separating percpu memory owned by kernel
proper and nVHE.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-8-dbrazdil@google.com
The hyp_adr/ldr_this_cpu helpers were introduced for use in hyp code
because they always needed to use TPIDR_EL2 for base, while
adr/ldr_this_cpu from kernel proper would select between TPIDR_EL2 and
_EL1 based on VHE/nVHE.
Simplify this now that the hyp mode case can be handled using the
__KVM_VHE/NVHE_HYPERVISOR__ macros.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Andrew Scull <ascull@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-6-dbrazdil@google.com
this_cpu_ptr is meant for use in kernel proper because it selects between
TPIDR_EL1/2 based on nVHE/VHE. __hyp_this_cpu_ptr was used in hyp to always
select TPIDR_EL2. Unify all users behind this_cpu_ptr and friends by
selecting _EL2 register under __KVM_NVHE_HYPERVISOR__. VHE continues
selecting the register using alternatives.
Under CONFIG_DEBUG_PREEMPT, the kernel helpers perform a preemption check
which is omitted by the hyp helpers. Preserve the behavior for nVHE by
overriding the corresponding macros under __KVM_NVHE_HYPERVISOR__. Extend
the checks into VHE hyp code.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Andrew Scull <ascull@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-5-dbrazdil@google.com
Relying on objcopy to prefix the ELF section names of the nVHE hyp code
is brittle and prevents us from using wildcards to match specific
section names.
Improve the build rules by partially linking all '.nvhe.o' files and
prefixing their ELF section names using a linker script. Continue using
objcopy for prefixing ELF symbol names.
One immediate advantage of this approach is that all subsections
matching a pattern can be merged into a single prefixed section, eg.
.text and .text.* can be linked into a single '.hyp.text'. This removes
the need for -fno-reorder-functions on GCC and will be useful in the
future too: LTO builds use .text subsections, compilers routinely
generate .rodata subsections, etc.
Partially linking all hyp code into a single object file also makes it
easier to analyze.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-2-dbrazdil@google.com
Patching the EL2 exception vectors is integral to the Spectre-v2
workaround, where it can be necessary to execute CPU-specific sequences
to nobble the branch predictor before running the hypervisor text proper.
Remove the dependency on CONFIG_RANDOMIZE_BASE and allow the EL2 vectors
to be patched even when KASLR is not enabled.
Fixes: 7a132017e7a5 ("KVM: arm64: Replace CONFIG_KVM_INDIRECT_VECTORS with CONFIG_RANDOMIZE_BASE")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202009221053.Jv1XsQUZ%lkp@intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Convert the KVM WA2 code to using the Spectre infrastructure,
making the code much more readable. It also allows us to
take SSBS into account for the mitigation.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Owing to the fact that the host kernel is always mitigated, we can
drastically simplify the WA2 handling by keeping the mitigation
state ON when entering the guest. This means the guest is either
unaffected or not mitigated.
This results in a nice simplification of the mitigation space,
and the removal of a lot of code that was never really used anyway.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
In a similar manner to the renaming of ARM64_HARDEN_BRANCH_PREDICTOR
to ARM64_SPECTRE_V2, rename ARM64_SSBD to ARM64_SPECTRE_V4. This isn't
_entirely_ accurate, as we also need to take into account the interaction
with SSBS, but that will be taken care of in subsequent patches.
Signed-off-by: Will Deacon <will@kernel.org>
If the system is not affected by Spectre-v2, then advertise to the KVM
guest that it is not affected, without the need for a safelist in the
guest.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
The Spectre-v2 mitigation code is pretty unwieldy and hard to maintain.
This is largely due to it being written hastily, without much clue as to
how things would pan out, and also because it ends up mixing policy and
state in such a way that it is very difficult to figure out what's going
on.
Rewrite the Spectre-v2 mitigation so that it clearly separates state from
policy and follows a more structured approach to handling the mitigation.
Signed-off-by: Will Deacon <will@kernel.org>
The removal of CONFIG_HARDEN_BRANCH_PREDICTOR means that
CONFIG_KVM_INDIRECT_VECTORS is synonymous with CONFIG_RANDOMIZE_BASE,
so replace it.
Signed-off-by: Will Deacon <will@kernel.org>
The spectre mitigations are too configurable for their own good, leading
to confusing logic trying to figure out when we should mitigate and when
we shouldn't. Although the plethora of command-line options need to stick
around for backwards compatibility, the default-on CONFIG options that
depend on EXPERT can be dropped, as the mitigations only do anything if
the system is vulnerable, a mitigation is available and the command-line
hasn't disabled it.
Remove CONFIG_HARDEN_BRANCH_PREDICTOR and CONFIG_ARM64_SSBD in favour of
enabling this code unconditionally.
Signed-off-by: Will Deacon <will@kernel.org>
As we can now hide events from the guest, let's also adjust its view of
PCMEID{0,1}_EL1 so that it can figure out why some common events are not
counting as they should.
The astute user can still look into the TRM for their CPU and find out
they've been cheated, though. Nobody's perfect.
Signed-off-by: Marc Zyngier <maz@kernel.org>
It can be desirable to expose a PMU to a guest, and yet not want the
guest to be able to count some of the implemented events (because this
would give information on shared resources, for example.
For this, let's extend the PMUv3 device API, and offer a way to setup a
bitmap of the allowed events (the default being no bitmap, and thus no
filtering).
Userspace can thus allow/deny ranges of event. The default policy
depends on the "polarity" of the first filter setup (default deny if the
filter allows events, and default allow if the filter denies events).
This allows to setup exactly what is allowed for a given guest.
Note that although the ioctl is per-vcpu, the map of allowed events is
global to the VM (it can be setup from any vcpu until the vcpu PMU is
initialized).
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The PMU code suffers from a small defect where we assume that the event
number provided by the guest is always 16 bit wide, even if the CPU only
implements the ARMv8.0 architecture. This isn't really problematic in
the sense that the event number ends up in a system register, cropping
it to the right width, but still this needs fixing.
In order to make it work, let's probe the version of the PMU that the
guest is going to use. This is done by temporarily creating a kernel
event and looking at the PMUVer field that has been saved at probe time
in the associated arm_pmu structure. This in turn gets saved in the kvm
structure, and subsequently used to compute the event mask that gets
used throughout the PMU code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
The PMU emulation error handling is pretty messy when dealing with
attributes. Let's refactor it so that we have less duplication,
and that it is easy to extend later on.
A functional change is that kvm_arm_pmu_v3_init() used to return
-ENXIO when the PMU feature wasn't set. The error is now reported
as -ENODEV, matching the documentation. -ENXIO is still returned
when the interrupt isn't properly configured.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fix following warnings caused by mismatch bewteen function parameters
and comments.
arch/arm64/kvm/mmu.c:128: warning: Function parameter or member 'mmu' not described in '__unmap_stage2_range'
arch/arm64/kvm/mmu.c:128: warning: Function parameter or member 'may_block' not described in '__unmap_stage2_range'
arch/arm64/kvm/mmu.c:128: warning: Excess function parameter 'kvm' description in '__unmap_stage2_range'
arch/arm64/kvm/mmu.c:499: warning: Function parameter or member 'writable' not described in 'kvm_phys_addr_ioremap'
arch/arm64/kvm/mmu.c:538: warning: Function parameter or member 'mmu' not described in 'stage2_wp_range'
arch/arm64/kvm/mmu.c:538: warning: Excess function parameter 'kvm' description in 'stage2_wp_range'
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1600307269-50957-1-git-send-email-tanxiaofei@huawei.com
As a result of a KVM_SET_USER_MEMORY_REGION ioctl, KVM flushes the
dcache for the memslot being changed to ensure a consistent view of memory
between the host and the guest: the host runs with caches enabled, and
it is possible for the data written by the hypervisor to still be in the
caches, but the guest is running with stage 1 disabled, meaning data
accesses are to Device-nGnRnE memory, bypassing the caches entirely.
Flushing the dcache is not necessary when KVM enables FWB, because it
forces the guest to uses cacheable memory accesses.
The current behaviour does not change, as the dcache flush helpers execute
the cache operation only if FWB is not enabled, but walking the stage 2
table is avoided.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915170442.131635-1-alexandru.elisei@arm.com
Fix kernel-doc warnings.
arch/arm64/kvm/inject_fault.c:210: warning: Function parameter or member
'vcpu' not described in 'kvm_inject_undefined'
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1600154512-44624-1-git-send-email-tiantao6@hisilicon.com
When userspace uses hugetlbfs for the VM memory, user_mem_abort() tries to
use the same block size to map the faulting IPA in stage 2. If stage 2
cannot the same block mapping because the block size doesn't fit in the
memslot or the memslot is not properly aligned, user_mem_abort() will fall
back to a page mapping, regardless of the block size. We can do better for
PUD backed hugetlbfs by checking if a PMD block mapping is supported before
deciding to use a page.
vma_pagesize is an unsigned long, use 1UL instead of 1ULL when assigning
its value.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200910133351.118191-1-alexandru.elisei@arm.com
The host need not concern itself with the pointer differences for the
hyp interfaces that are shared between VHE and nVHE so leave it to the
hyp to handle.
As the SMCCC function IDs are converted into function calls, it is a
suitable place to also convert any pointer arguments into hyp pointers.
This, additionally, eases the reuse of the handlers in different
contexts.
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-20-ascull@google.com
To complete the transition to SMCCC, the hyp initialization is given a
function ID. This looks neater than comparing the hyp stub function IDs
to the page table physical address.
Some care is taken to only clobber x0-3 before the host context is saved
as only those registers can be clobbered accoring to SMCCC. Fortunately,
only a few acrobatics are needed. The possible new tpidr_el2 is moved to
the argument in x2 so that it can be stashed in tpidr_el2 early to free
up a scratch register. The page table configuration then makes use of
x0-2.
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-19-ascull@google.com
Rather than passing arbitrary function pointers to run at hyp, define
and equivalent set of SMCCC functions.
Since the SMCCC functions are strongly tied to the original function
prototypes, it is not expected for the host to ever call an invalid ID
but a warning is raised if this does ever occur.
As __kvm_vcpu_run is used for every switch between the host and a guest,
it is explicitly singled out to be identified before the other function
IDs to improve the performance of the hot path.
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-18-ascull@google.com
