4 commits

Author	SHA1	Message	Date
Rafael J. Wysocki	d7a4a85c9a	ACPI: DPTF: Add ACPI_DPTF Kconfig menu ... Add a Kconfig menu for Intel DPTF (Dynamic Platform and Thermal Framework), put both the existing participant drivers in it and set them to be built as modules by default. While at it, do a few assorted cleanups for a good measure. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Borislav Petkov <bp@suse.de>	2020-10-16 18:16:39 +02:00
Srinivas Pandruvada	2ce6324ead	ACPI: DPTF: Add PCH FIVR participant driver ... This driver adds support for Dynamic Platform and Thermal Framework (DPTF) PCH (Platform Controller Hub) FIVR (Fully Integrated Voltage Regulator) participant support. This participant is responsible for exposing platform telemetry and control for: freq_mhz_high_clock freq_mhz_low_clock These attributes are used to get and set PCH FIVR switching frequency for thermal and radio frequency interference mitigation. Refer to Documentation/ABI/testing/sysfs-platform-dptf for ABI details. ACPI methods description used in this driver: RFC0: This ACPI method to set PCH FIVR switching frequency when FIVR clock is 19.2MHz or 24MHz. The ACPI method takes a DWORD value. GFC0: This ACPI method to get PCH FIVR switching frequency when FIVR clock is 19.2MHz or 24MHz. RFC1: This ACPI method to set PCH FIVR switching frequency when FIVR clock is 38.4MHz. The ACPI method takes a DWORD value. GFC1: This ACPI method to get PCH FIVR switching frequency when FIVR clock is 38.4MHz. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2020-09-18 18:13:56 +02:00
Greg Kroah-Hartman	b24413180f	License cleanup: add SPDX GPL-2.0 license identifier to files with no license ... Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2017-11-02 11:10:55 +01:00
Srinivas Pandruvada	6256ebd5da	ACPI / DPTF: Add DPTF power participant driver ... This driver adds support for Dynamic Platform and Thermal Framework (DPTF) Platform Power Participant device (INT3407) support. This participant is responsible for exposing platform telemetry such as: max_platform_power platform_power_source adapter_rating battery_steady_power charger_type These attributes are presented via sysfs interface under the INT3407 platform device: $ls /sys/bus/platform/devices/INT3407\:00/dptf_power/ adapter_rating_mw battery_steady_power_mw charger_type max_platform_power_mw platform_power_source ` ACPI methods description used in this driver: PMAX: Maximum platform power that can be supported by the battery in mW. PSRC: System charge source, 0x00 = DC 0x01 = AC 0x02 = USB 0x03 = Wireless Charger ARTG: Adapter rating in mW (Maximum Adapter power) Must be 0 if no AC adapter is plugged in. CTYP: Charger Type, Traditional : 0x01 Hybrid: 0x02 NVDC: 0x03 PBSS: Returns max sustained power for battery in milliWatts. The INT3407 also contains _BTS and _BIX objects, which are compliant to ACPI 5.0, specification. Those objects are already used by ACPI battery (PNP0C0A) driver and information about them is exported via Linux power supply class registration. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2016-07-21 13:40:09 +02:00