The correct property is 'microchip,mic-pos', not 'mchp,mic-pos', so
replace all occurences of 'mchp,mic-pos' with 'microchip,mic-pos'.
Fix a multi-line comment format while we are at it.
Fixes: 50291652af ("ASoC: atmel: mchp-pdmc: add PDMC driver")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220318092609.130901-1-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are some new registers added on i.MX8ULP, they are
the SPDIF transmit Professional C channel registers,
192bit SPDIF receive C channel registers, and 192bit SPDIF
transmit C channel registers.
There are two output lines, SPDIF_OUT1 and SPDIF_OUT2, the
original REG_SPDIF_STCSCH and REG_SPDIF_STCSCL are used for
SPDIF_OUT1, the new REG_SPDIF_STCSPH and REG_SPDIF_STCSPL
are used for SPDIF_OUT2, the 192bit SPDIF C channel registers
are used for both.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1647408538-2982-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
This patchset makes the topology parsing layer in the SOF driver
IPC-agnostic in preparation for supporting the new IPC version
introduced in the SOF firmware. These patches purely contain abstraction
changes for the current IPC version (IPC3) supported and do not introduce
any functional changes.
Update power domains exit function calling from runtime resume
to remove function which was wrongly placed and causing crash in
device suspend and resume.
Fixes: 9e3d83c528 ("ASoC: codecs: Add power domains support in digital macro codecs")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Link: https://lore.kernel.org/r/1647355531-4150-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is essentially a revert of the commit dc865fb9e7 ("ASoC: sti:
Use snd_pcm_stop_xrun() helper"), which converted the manual
snd_pcm_stop() calls with snd_pcm_stop_xrun().
The commit above introduced a deadlock as snd_pcm_stop_xrun() itself
takes the PCM stream lock while the caller already holds it. Since
the conversion was done only for consistency reason and the open-call
with snd_pcm_stop() to the XRUN state is a correct usage, let's revert
the commit back as the fix.
Fixes: dc865fb9e7 ("ASoC: sti: Use snd_pcm_stop_xrun() helper")
Reported-by: Daniel Palmer <daniel@0x0f.com>
Cc: Arnaud POULIQUEN <arnaud.pouliquen@st.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220315091319.3351522-1-daniel@0x0f.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20220315164158.19804-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM buffers might be allocated dynamically when the buffer
preallocation failed or a larger buffer is requested, and it's not
guaranteed that substream->dma_buffer points to the actually used
buffer. The driver needs to refer to substream->runtime->dma_addr
instead for the buffer address.
Fixes: cab396d8b2 ("ASoC: amd: add ACP5x pcm dma driver ops")
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220316091303.9745-1-tangmeng@uniontech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This is similar to commit 64b92de960
("ASoC: wcd9335: fix a leaked reference by adding missing of_node_put")
Fixes: a61f3b4f47 ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220316083631.14103-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error path.
Fixes: 082482a502 ("ASoC: mediatek: mt8195: release device_node after snd_soc_register_card")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220316084623.24238-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It will be safe when getting the calibration params after power-on.
All powers are ready to read the calibration params from EFUSE.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220315093740.12008-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the error handling path, the clk_prepare_enable() function
call should be balanced by a corresponding 'clk_disable_unprepare()'
call , as already done in the remove function.
Fixes: de66b34550 ("ASoC: codecs: msm8916-wcd-analog: add MBHC support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220316041924.17560-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220315230816.2964577-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error paths.
Fix this by calling of_node_put() in error handling too.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220316014059.19292-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error path.
Fixes: fdbcb3cba5 ("ASoC: atmel: machine driver for at91sam9x5-wm8731 boards")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220316111530.4551-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.
Fixes:081068fd64140 ("ASoC: rockchip: add support for i2s-tdm controller")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220315025415.2593762-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
kstrdup() is a memory allocation function which can return NULL when
some internal memory errors happen. It is better to check the return
value of it to catch the error in time.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_EC21778DC383823CBC4069EA9F0B84943905@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new topology IPC op, pipeline_complete in struct ipc_tplg_ops
and set the op for IPC3. Replace the calls to
snd_sof_complete_pipeline() with the calls to the topology IPC
pipeline_complete op.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-20-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make widget binding in the topology parser IPC agnostic by introducing a
new op, bind_event, in struct ipc_tplg_widget_ops. Also set the op
for all widget types in the IPC3 topology ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-19-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make the control parser in topology IPC agnostic by introducing 2 new
topology IPC ops, control_setup and control_free. These ops handle
setting up/freeing the control data in the IPC format based on the IPC
version.
Along with this, modify the struct snd_sof_control to remove the
IPC-specific field, control_data and replace it with the void pointer to
ipc_control_data. Also, add a few new fields to store all the
information parsed from topology.
Finally, define and set the control setup/free ops for IPC3.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-18-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to the dai_in/out widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
DAI component based on the topology widget_setup op in ipc3_tplg_ops.
DAI link parsing is also made IPC agnostic by parsing the list of tokens
associated with all DAI types. The config will be applied to the
respective DAI widgets during topology complete.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-17-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define and set the route_setup op for IPC3 topology ops and use it for
setting up routes.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-16-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to effect type widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
process component based on the topology widget_setup op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-15-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to the siggen widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
tone component based on the topology widget_setup op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-14-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to the asrc widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
asrc component based on the topology widget_setup op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-13-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to the src widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
src component based on the topology widget_setup op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-12-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to the mux/demux widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
mux/demux component based on the topology widget_setup op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-11-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to the mixer widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
mixer component based on the topology widget_setup op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-10-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to the pga type widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
pga component based on the topology widget_setup op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to the buffer widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
buffer component based on the topology widget_setup op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to the scheduler widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
pipeline component based on the topology widget_setup op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the IPC ops including the topology-related IPC ops for the current
version (IPC3, named after the current SOF firmware ABI major version 3.0)
of IPC supported by the SOF firmware and set it as default. The topology
IPC ops and the widget ops within the topology IPC ops are both
mandatory.
With the introduction of IPC3 ops, we define the list of tokens pertaining
to the AIF_IN/AIF_OUT widgets. Then these tokens are parsed during
topology parsing and saved as part of the swidget tuples array. Once
topology parsing is complete, these tokens will be applied to create the
IPC structure for the host component based on the topology widget_setup
op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function for processing tuple arrays and populating the
IPC structure objects based on the token ID passed.
Introduce a new enum representing token ID for the tokens
currently used in the topology parse and a new struct sof_token_info
to store the information about a token set. Finally, expose the struct
snd_sof_topology token as it will be used by IPC-specific code.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for supporting a new IPC version that will be introduced
in the SOF firmware, add a new set of ops that will be version specific.
For now, the IPC ops contain only the topology-related ops for setting
up widgets and pipeline connections. It will be expanded later to also
abstract the IPC-specific items in the component driver and DAI driver.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce a new struct for DAI links to save the DAI link information
parsed from topology. Also add a list of dai_links to struct snd_sof_dev
that will be populated during topology parsing.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In function mchp_pdmc_af_put(), Intel's kernel test robot reports the
following warning:
sound/soc/atmel/mchp-pdmc.c:186:34: warning: address of array \
'uvalue->value.integer.value' will always evaluate to 'true' \
[-Wpointer-bool-conversion]
This is because we are using `uvalue->value.integer.value` which its
type is `long value[128];` for conditional expression and that array
will always decay to a non-NULL pointer. Using a non-NULL pointer for
conditional expression will always evaluate to true.
Fix this by changing it to `uvalue->value.integer.value[0]` as that's
what the mchp_pdmc_af_get() function sets.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alviro Iskandar Setiawan <alviro.iskandar@gnuweeb.org>
Link: https://lore.kernel.org/r/20220315001848.3763534-1-alviro.iskandar@gnuweeb.org
Signed-off-by: Mark Brown <broonie@kernel.org>
It should be better to reverse the check on codec_dai
and returned early in order to be easier to understand.
Fixes: de2c6f9881 ("ASoC: soc-compress: prevent the potentially use of null pointer")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220310030041.1556323-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
In preparation for supporting the newly introduced IPC version in the SOF
firmware, this patchset adds the changes required to make the
pcm_hw_params DSP op IPC agnostic.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
One important fix from Kai to restore DM1 L1 functionality, one
important update from Peter to use DMA trace buffers as capture-only
and sync them and a couple of minor updates for Intel/SOF platforms.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
A continuation of cleanup work of Intel SST solutions found in
sound/soc/intel/. With two major chapters released last year catpt [1]
and removal of haswell solution [2], time has come for Skylake-driver.
Througout 2019, 2020 and 2021 Skylake-driver has had many fixes applied
and even attempts of refactors as seen in fundamental overhaul [3], IPC
flow adjustments [4] and LARGE_CONFIG overhaul [5] series.
Unfortunately, story repeats itself - problems are found within the core
of a driver. Painting it with different colors does not change the fact
that is it still a house of cards. As changes needed to address those
issues would make Skylake solution incompatible with its previous
revisions, a decision has been made to provide a new solution instead.
In time it would deprecate and replace Skylake-driver.
That solution has been called AVS - from AudioDSP architecture name:
Audio-Voice-Speech. It is meant to provide support for the exact same
range of platforms as its predecessor: SKL, KBL, AML and APL.
Note: this series is dependent upon HDA-series [6] which exposes several
codec-organization functions allowing for reduced code size on
avs-driver side.
Note: this series does not add fully functional driver as its size would
get out of control. Here, focus is put on adding IPC protocol and code
loading code.
Compared to SKL and KBL, more recent cAVS platforms are meant to re-use
one of HDAudio streams during boot procedure causing CLDMA to become
obsolete. Once transferred, given stream is returned to pool available
for audio streaming.
Module loading handler is stub as library and module code became
inseparable in later firmware generations.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-18-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With CLDMA transfer implemented, make use of it to shape firmware,
library and module loading routines for SKL and KBL platforms.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-17-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SKL and KBL rely on a dedicated HDAudio DMA stream for code loading and
authentication. The implementation of this specific mechanism for
SKL-based platforms re-uses HDAudio DMA (streaming) functions found in
HDA library to avoid duplication of functionality.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-16-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Code loading is a complex procedure and requires combined effort of DMA
and IPCs. With IPCs already in place, lay out ground for specific DMA
transfer operations.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-15-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Wrap elementary DSP-core operations and resource control into more
complex handlers. This is done to reduce the number of invocations of
wrapped operations throughout the driver as order of operations matters -
most flows involve register manipulation and IPCs combined.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Declare structures and constants for all modules being part of basefw
binary. These are used in streaming operations to communicate the needs
of software to firmware side.
While adding module types, append handler for SET_SINK_FORMAT runtime
for COPIER module which allows for configuration of output pin other
than the default one (0).
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With basefw runtime parameter handlers added, implement utility
functions to ease pipelines and modules allocation. IDA is enlisted to
help with that.
As firmware is modular and multiple binaries can be loaded on-demand
depending on the streaming scenario, custom firmware caching mechanism
is added.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each module may expose a range of runtime parameters. For basefw,
implement handlers for: FIRMWARE_CONFIG, HARDWARE_CONFIG and
MODULES_INFO. These are used by driver to dynamically allocate resources
in respect to platform details, reducing number of hardcodes and code
duplications that would otherwise be needed to be defined within the
driver code.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ROM requests are messages initiated by Host to alter firmware early boot
process. They specify whether the next boot should be a fresh start or if
IMR can be used to speed things up.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
