Commit Graph

27 Commits

Author SHA1 Message Date
stephen hemminger f1f39f9110 l2tp: auto load type modules
It should not be necessary to do explicit module loading when
configuring L2TP. Modules should be loaded as needed instead
(as is done already with netlink and other tunnel types).

This patch adds a new module alias type and code to load
the sub module on demand.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25 12:27:22 -07:00
Jiri Benc 67b61f6c13 netlink: implement nla_get_in_addr and nla_get_in6_addr
Those are counterparts to nla_put_in_addr and nla_put_in6_addr.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31 13:58:35 -04:00
Jiri Benc 930345ea63 netlink: implement nla_put_in_addr and nla_put_in6_addr
IP addresses are often stored in netlink attributes. Add generic functions
to do that.

For nla_put_in_addr, it would be nicer to pass struct in_addr but this is
not used universally throughout the kernel, in way too many places __be32 is
used to store IPv4 address.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31 13:58:35 -04:00
Johannes Berg 053c095a82 netlink: make nlmsg_end() and genlmsg_end() void
Contrary to common expectations for an "int" return, these functions
return only a positive value -- if used correctly they cannot even
return 0 because the message header will necessarily be in the skb.

This makes the very common pattern of

  if (genlmsg_end(...) < 0) { ... }

be a whole bunch of dead code. Many places also simply do

  return nlmsg_end(...);

and the caller is expected to deal with it.

This also commonly (at least for me) causes errors, because it is very
common to write

  if (my_function(...))
    /* error condition */

and if my_function() does "return nlmsg_end()" this is of course wrong.

Additionally, there's not a single place in the kernel that actually
needs the message length returned, and if anyone needs it later then
it'll be very easy to just use skb->len there.

Remove this, and make the functions void. This removes a bunch of dead
code as described above. The patch adds lines because I did

-	return nlmsg_end(...);
+	nlmsg_end(...);
+	return 0;

I could have preserved all the function's return values by returning
skb->len, but instead I've audited all the places calling the affected
functions and found that none cared. A few places actually compared
the return value with <= 0 in dump functionality, but that could just
be changed to < 0 with no change in behaviour, so I opted for the more
efficient version.

One instance of the error I've made numerous times now is also present
in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't
check for <0 or <=0 and thus broke out of the loop every single time.
I've preserved this since it will (I think) have caused the messages to
userspace to be formatted differently with just a single message for
every SKB returned to userspace. It's possible that this isn't needed
for the tools that actually use this, but I don't even know what they
are so couldn't test that changing this behaviour would be acceptable.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-18 01:03:45 -05:00
Bill Hong 33f72e6f0c l2tp : multicast notification to the registered listeners
Previously l2tp module did not provide any means for the user space to
get notified when tunnels/sessions are added/modified/deleted.
This change contains the following
- create a multicast group for the listeners to register.
- notify the registered listeners when the tunnels/sessions are
  created/modified/deleted.

Signed-off-by: Bill Hong <bhong@brocade.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Sven-Thorsten Dietrich <sven@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31 14:17:20 -05:00
Tom Herbert 6b649feafe l2tp: Add support for zero IPv6 checksums
Added new L2TP configuration options to allow TX and RX of
zero checksums in IPv6. Default is not to use them.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-23 16:28:53 -04:00
Tom Herbert 28448b8045 net: Split sk_no_check into sk_no_check_{rx,tx}
Define separate fields in the sock structure for configuring disabling
checksums in both TX and RX-- sk_no_check_tx and sk_no_check_rx.
The SO_NO_CHECK socket option only affects sk_no_check_tx. Also,
removed UDP_CSUM_* defines since they are no longer necessary.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-23 16:28:53 -04:00
Guillaume Nault bb5016eac1 l2tp: fix manual sequencing (de)activation in L2TPv2
Commit e0d4435f "l2tp: Update PPP-over-L2TP driver to work over L2TPv3"
broke the PPPOL2TP_SO_SENDSEQ setsockopt. The L2TP header length was
previously computed by pppol2tp_l2t_header_len() before each call to
l2tp_xmit_skb(). Now that header length is retrieved from the hdr_len
session field, this field must be updated every time the L2TP header
format is modified, or l2tp_xmit_skb() won't push the right amount of
data for the L2TP header.

This patch uses l2tp_session_set_header_len() to adjust hdr_len every
time sequencing is (de)activated from userspace (either by the
PPPOL2TP_SO_SENDSEQ setsockopt or the L2TP_ATTR_SEND_SEQ netlink
attribute).

Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-06 14:25:39 -05:00
Johannes Berg c53ed74236 genetlink: only pass array to genl_register_family_with_ops()
As suggested by David Miller, make genl_register_family_with_ops()
a macro and pass only the array, evaluating ARRAY_SIZE() in the
macro, this is a little safer.

The openvswitch has some indirection, assing ops/n_ops directly in
that code. This might ultimately just assign the pointers in the
family initializations, saving the struct genl_family_and_ops and
code (once mcast groups are handled differently.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19 16:39:05 -05:00
Johannes Berg 4534de8305 genetlink: make all genl_ops users const
Now that genl_ops are no longer modified in place when
registering, they can be made const. This patch was done
mostly with spatch:

@@
identifier ops;
@@
+const
 struct genl_ops ops[] = {
 ...
 };

(except the struct thing in net/openvswitch/datapath.c)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 17:10:41 -05:00
Eric Dumazet efe4208f47 ipv6: make lookups simpler and faster
TCP listener refactoring, part 4 :

To speed up inet lookups, we moved IPv4 addresses from inet to struct
sock_common

Now is time to do the same for IPv6, because it permits us to have fast
lookups for all kind of sockets, including upcoming SYN_RECV.

Getting IPv6 addresses in TCP lookups currently requires two extra cache
lines, plus a dereference (and memory stall).

inet6_sk(sk) does the dereference of inet_sk(__sk)->pinet6

This patch is way bigger than its IPv4 counter part, because for IPv4,
we could add aliases (inet_daddr, inet_rcv_saddr), while on IPv6,
it's not doable easily.

inet6_sk(sk)->daddr becomes sk->sk_v6_daddr
inet6_sk(sk)->rcv_saddr becomes sk->sk_v6_rcv_saddr

And timewait socket also have tw->tw_v6_daddr & tw->tw_v6_rcv_saddr
at the same offset.

We get rid of INET6_TW_MATCH() as INET6_MATCH() is now the generic
macro.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-09 00:01:25 -04:00
Tom Parkin 7b7c0719cd l2tp: avoid deadlock in l2tp stats update
l2tp's u64_stats writers were incorrectly synchronised, making it possible to
deadlock a 64bit machine running a 32bit kernel simply by sending the l2tp
code netlink commands while passing data through l2tp sessions.

Previous discussion on netdev determined that alternative solutions such as
spinlock writer synchronisation or per-cpu data would bring unjustified
overhead, given that most users interested in high volume traffic will likely
be running 64bit kernels on 64bit hardware.

As such, this patch replaces l2tp's use of u64_stats with atomic_long_t,
thereby avoiding the deadlock.

Ref:
http://marc.info/?l=linux-netdev&m=134029167910731&w=2
http://marc.info/?l=linux-netdev&m=134079868111131&w=2

Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 12:10:39 -04:00
Tom Parkin b6fdfdfab0 l2tp: set netnsok flag for netlink messages
The L2TP netlink code can run in namespaces.  Set the netnsok flag in
genl_family to true to reflect that fact.

Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-05 14:20:30 -05:00
Alan Cox e269ed26d4 l2tp: session is an array not a pointer
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-26 03:46:41 -04:00
David S. Miller 6a06e5e1bb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/team/team.c
	drivers/net/usb/qmi_wwan.c
	net/batman-adv/bat_iv_ogm.c
	net/ipv4/fib_frontend.c
	net/ipv4/route.c
	net/l2tp/l2tp_netlink.c

The team, fib_frontend, route, and l2tp_netlink conflicts were simply
overlapping changes.

qmi_wwan and bat_iv_ogm were of the "use HEAD" variety.

With help from Antonio Quartulli.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28 14:40:49 -04:00
Wei Yongjun 7f8436a126 l2tp: fix return value check
In case of error, the function genlmsg_put() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27 13:18:19 -04:00
Eric W. Biederman 15e473046c netlink: Rename pid to portid to avoid confusion
It is a frequent mistake to confuse the netlink port identifier with a
process identifier.  Try to reduce this confusion by renaming fields
that hold port identifiers portid instead of pid.

I have carefully avoided changing the structures exported to
userspace to avoid changing the userspace API.

I have successfully built an allyesconfig kernel with this change.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-10 15:30:41 -04:00
Thomas Graf 58050fce35 net: Use NLMSG_DEFAULT_SIZE in combination with nlmsg_new()
Using NLMSG_GOODSIZE results in multiple pages being used as
nlmsg_new() will automatically add the size of the netlink
header to the payload thus exceeding the page limit.

NLMSG_DEFAULT_SIZE takes this into account.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Cc: Jiri Pirko <jpirko@redhat.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28 17:56:43 -07:00
Neil Horman e9412c3708 genetlink: Build a generic netlink family module alias
Generic netlink searches for -type- formatted aliases when requesting a module to
fulfill a protocol request (i.e. net-pf-16-proto-16-type-<x>, where x is a type
value).  However generic netlink protocols have no well defined type numbers,
they have string names.  Modify genl_ctrl_getfamily to request an alias in the
format net-pf-16-proto-16-family-<x> instead, where x is a generic string, and
add a macro that builds on the previously added MODULE_ALIAS_NET_PF_PROTO_NAME
macro to allow modules to specifify those generic strings.

Note, l2tp previously hacked together an net-pf-16-proto-16-type-l2tp alias
using the MODULE_ALIAS macro, with these updates we can convert that to use the
PROTO_NAME macro.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: James Chapman <jchapman@katalix.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-29 22:33:56 -04:00
Joe Perches a4ca44fa57 net: l2tp: Standardize logging styles
Use more current logging styles.

Add pr_fmt to prefix output appropriately.
Convert printks to pr_<level>.
Convert PRINTK macros to new l2tp_<level> macros.
Neaten some <foo>_refcount debugging macros.
Use print_hex_dump_bytes instead of hand-coded loops.
Coalesce formats and align arguments.

Some KERN_DEBUG output is not now emitted unless
dynamic_debugging is enabled.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-17 04:34:38 -04:00
Chris Elston f9bac8df90 l2tp: netlink api for l2tpv3 ipv6 unmanaged tunnels
This patch adds support for unmanaged L2TPv3 tunnels over IPv6 using
the netlink API. We already support unmanaged L2TPv3 tunnels over
IPv4. A patch to iproute2 to make use of this feature will be
submitted separately.

Signed-off-by: Chris Elston <celston@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-01 09:30:55 -04:00
James Chapman 5de7aee541 l2tp: fix locking of 64-bit counters for smp
L2TP uses 64-bit counters but since these are not updated atomically,
we need to make them safe for smp. This patch addresses that.

Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-01 09:30:54 -04:00
David S. Miller 60aed2abb3 l2tp: Stop using NLA_PUT*().
These macros contain a hidden goto, and are thus extremely error
prone and make code hard to audit.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02 04:33:41 -04:00
David S. Miller 8cb4901447 l2tp: Fix set-but-unused variables.
The variable 'ret' is set but unused in l2tp_nl_register_ops().

This was obviously meant to maintain error codes which are
returned to the caller, make it so.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17 17:01:05 -07:00
David S. Miller f481c0d862 l2tp: Add missing semicolon to MODULE_ALIAS() in l2tp_netlink.c
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03 14:58:07 -07:00
James Chapman 789a4a2c61 l2tp: Add support for static unmanaged L2TPv3 tunnels
This patch adds support for static (unmanaged) L2TPv3 tunnels, where
the tunnel socket is created by the kernel rather than being created
by userspace. This means L2TP tunnels and sessions can be created
manually, without needing an L2TP control protocol implemented in
userspace. This might be useful where the user wants a simple ethernet
over IP tunnel.

A patch to iproute2 adds a new command set under "ip l2tp" to make use
of this feature. This will be submitted separately.

Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03 14:56:08 -07:00
James Chapman 309795f4be l2tp: Add netlink control API for L2TP
In L2TPv3, we need to create/delete/modify/query L2TP tunnel and
session contexts. The number of parameters is significant. So let's
use netlink. Userspace uses this API to control L2TP tunnel/session
contexts in the kernel.

The previous pppol2tp driver was managed using [gs]etsockopt(). This
API is retained for backwards compatibility. Unlike L2TPv2 which
carries only PPP frames, L2TPv3 can carry raw ethernet frames or other
frame types and these do not always have an associated socket
family. Therefore, we need a way to use L2TP sessions that doesn't
require a socket type for each supported frame type. Hence netlink is
used.

Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03 14:56:05 -07:00