Commit graph

357 commits

Author SHA1 Message Date
Linus Torvalds
46f0537b1e Merge branch 'stable-4.12' of git://git.infradead.org/users/pcmoore/audit
Pull audit updates from Paul Moore:
 "Fourteen audit patches for v4.12 that span the full range of fixes,
  new features, and internal cleanups.

  We have a patches to move to 64-bit timestamps, convert refcounts from
  atomic_t to refcount_t, track PIDs using the pid struct instead of
  pid_t, convert our own private audit buffer cache to a standard
  kmem_cache, log kernel module names when they are unloaded, and
  normalize the NETFILTER_PKT to make the userspace folks happier.

  From a fixes perspective, the most important is likely the auditd
  connection tracking RCU fix; it was a rather brain dead bug that I'll
  take the blame for, but thankfully it didn't seem to affect many
  people (only one report).

  I think the patch subject lines and commit descriptions do a pretty
  good job of explaining the details and why the changes are important
  so I'll point you there instead of duplicating it here; as usual, if
  you have any questions you know where to find us.

  We also manage to take out more code than we put in this time, that
  always makes me happy :)"

* 'stable-4.12' of git://git.infradead.org/users/pcmoore/audit:
  audit: fix the RCU locking for the auditd_connection structure
  audit: use kmem_cache to manage the audit_buffer cache
  audit: Use timespec64 to represent audit timestamps
  audit: store the auditd PID as a pid struct instead of pid_t
  audit: kernel generated netlink traffic should have a portid of 0
  audit: combine audit_receive() and audit_receive_skb()
  audit: convert audit_watch.count from atomic_t to refcount_t
  audit: convert audit_tree.count from atomic_t to refcount_t
  audit: normalize NETFILTER_PKT
  netfilter: use consistent ipv4 network offset in xt_AUDIT
  audit: log module name on delete_module
  audit: remove unnecessary semicolon in audit_watch_handle_event()
  audit: remove unnecessary semicolon in audit_mark_handle_event()
  audit: remove unnecessary semicolon in audit_field_valid()
2017-05-03 09:21:59 -07:00
Paul Moore
48d0e023af audit: fix the RCU locking for the auditd_connection structure
Cong Wang correctly pointed out that the RCU read locking of the
auditd_connection struct was wrong, this patch correct this by
adopting a more traditional, and correct RCU locking model.

This patch is heavily based on an earlier prototype by Cong Wang.

Cc: <stable@vger.kernel.org> # 4.11.x-
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-05-02 10:16:05 -04:00
Paul Moore
8cc96382d9 audit: use kmem_cache to manage the audit_buffer cache
The audit subsystem implemented its own buffer cache mechanism which
is a bit silly these days when we could use the kmem_cache construct.

Some credit is due to Florian Westphal for originally proposing that
we remove the audit cache implementation in favor of simple
kmalloc()/kfree() calls, but I would rather have a dedicated slab
cache to ease debugging and future stats/performance work.

Cc: Florian Westphal <fw@strlen.de>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-05-02 10:16:05 -04:00
Deepa Dinamani
2115bb250f audit: Use timespec64 to represent audit timestamps
struct timespec is not y2038 safe.
Audit timestamps are recorded in string format into
an audit buffer for a given context.
These mark the entry timestamps for the syscalls.
Use y2038 safe struct timespec64 to represent the times.
The log strings can handle this transition as strings can
hold upto 1024 characters.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-05-02 10:16:05 -04:00
Paul Moore
b6c7c115c2 audit: store the auditd PID as a pid struct instead of pid_t
This is arguably the right thing to do, and will make it easier when
we start supporting multiple audit daemons in different namespaces.

Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-05-02 10:16:05 -04:00
Paul Moore
45a0642b4d audit: kernel generated netlink traffic should have a portid of 0
We were setting the portid incorrectly in the netlink message headers,
fix that to always be 0 (nlmsg_pid = 0).

Signed-off-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
2017-05-02 10:16:05 -04:00
Paul Moore
a9d1620877 audit: combine audit_receive() and audit_receive_skb()
There is no reason to have both of these functions, combine the two.

Signed-off-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
2017-05-02 10:16:05 -04:00
David S. Miller
6b6cbc1471 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts were simply overlapping changes.  In the net/ipv4/route.c
case the code had simply moved around a little bit and the same fix
was made in both 'net' and 'net-next'.

In the net/sched/sch_generic.c case a fix in 'net' happened at
the same time that a new argument was added to qdisc_hash_add().

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-15 21:16:30 -04:00
Johannes Berg
2d4bc93368 netlink: extended ACK reporting
Add the base infrastructure and UAPI for netlink extended ACK
reporting. All "manual" calls to netlink_ack() pass NULL for now and
thus don't get extended ACK reporting.

Big thanks goes to Pablo Neira Ayuso for not only bringing up the
whole topic at netconf (again) but also coming up with the nlattr
passing trick and various other ideas.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13 13:58:20 -04:00
Paul Moore
264d509637 audit: make sure we don't let the retry queue grow without bounds
The retry queue is intended to provide a temporary buffer in the case
of transient errors when communicating with auditd, it is not meant
as a long life queue, that functionality is provided by the hold
queue.

This patch fixes a problem identified by Seth where the retry queue
could grow uncontrollably if an auditd instance did not connect to
the kernel to drain the queues.  This commit fixes this by doing the
following:

* Make sure we always call auditd_reset() if we decide the connection
with audit is really dead.  There were some cases in
kauditd_hold_skb() where we did not reset the connection, this patch
relocates the reset calls to kauditd_thread() so all the error
conditions are caught and the connection reset.  As a side effect,
this means we could move auditd_reset() and get rid of the forward
definition at the top of kernel/audit.c.

* We never checked the status of the auditd connection when
processing the main audit queue which meant that the retry queue
could grow unchecked.  This patch adds a call to auditd_reset()
after the main queue has been processed if auditd is not connected,
the auditd_reset() call will make sure the retry and hold queues are
correctly managed/flushed so that the retry queue remains reasonable.

Cc: <stable@vger.kernel.org> # 4.10.x-: 5b52330bbf
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-04-10 11:16:59 -04:00
Paul Moore
5b52330bbf audit: fix auditd/kernel connection state tracking
What started as a rather straightforward race condition reported by
Dmitry using the syzkaller fuzzer ended up revealing some major
problems with how the audit subsystem managed its netlink sockets and
its connection with the userspace audit daemon.  Fixing this properly
had quite the cascading effect and what we are left with is this rather
large and complicated patch.  My initial goal was to try and decompose
this patch into multiple smaller patches, but the way these changes
are intertwined makes it difficult to split these changes into
meaningful pieces that don't break or somehow make things worse for
the intermediate states.

The patch makes a number of changes, but the most significant are
highlighted below:

* The auditd tracking variables, e.g. audit_sock, are now gone and
replaced by a RCU/spin_lock protected variable auditd_conn which is
a structure containing all of the auditd tracking information.

* We no longer track the auditd sock directly, instead we track it
via the network namespace in which it resides and we use the audit
socket associated with that namespace.  In spirit, this is what the
code was trying to do prior to this patch (at least I think that is
what the original authors intended), but it was done rather poorly
and added a layer of obfuscation that only masked the underlying
problems.

* Big backlog queue cleanup, again.  In v4.10 we made some pretty big
changes to how the audit backlog queues work, here we haven't changed
the queue design so much as cleaned up the implementation.  Brought
about by the locking changes, we've simplified kauditd_thread() quite
a bit by consolidating the queue handling into a new helper function,
kauditd_send_queue(), which allows us to eliminate a lot of very
similar code and makes the looping logic in kauditd_thread() clearer.

* All netlink messages sent to auditd are now sent via
auditd_send_unicast_skb().  Other than just making sense, this makes
the lock handling easier.

* Change the audit_log_start() sleep behavior so that we never sleep
on auditd events (unchanged) or if the caller is holding the
audit_cmd_mutex (changed).  Previously we didn't sleep if the caller
was auditd or if the message type fell between a certain range; the
type check was a poor effort of doing what the cmd_mutex check now
does.  Richard Guy Briggs originally proposed not sleeping the
cmd_mutex owner several years ago but his patch wasn't acceptable
at the time.  At least the idea lives on here.

* A problem with the lost record counter has been resolved.  Steve
Grubb and I both happened to notice this problem and according to
some quick testing by Steve, this problem goes back quite some time.
It's largely a harmless problem, although it may have left some
careful sysadmins quite puzzled.

Cc: <stable@vger.kernel.org> # 4.10.x-
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-03-21 11:26:35 -04:00
Linus Torvalds
b8989bccd6 Merge branch 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit
Pull audit updates from Paul Moore:
 "The audit changes for v4.11 are relatively small compared to what we
  did for v4.10, both in terms of size and impact.

   - two patches from Steve tweak the formatting for some of the audit
     records to make them more consistent with other audit records.

   - three patches from Richard record the name of a module on module
     load, fix the logging of sockaddr information when using
     socketcall() on 32-bit systems, and add the ability to reset
     audit's lost record counter.

   - my lone patch just fixes an annoying style nit that I was reminded
     about by one of Richard's patches.

  All these patches pass our test suite"

* 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit:
  audit: remove unnecessary curly braces from switch/case statements
  audit: log module name on init_module
  audit: log 32-bit socketcalls
  audit: add feature audit_lost reset
  audit: Make AUDIT_ANOM_ABEND event normalized
  audit: Make AUDIT_KERNEL event conform to the specification
2017-02-21 13:25:50 -08:00
Richard Guy Briggs
92c82e8a32 audit: add feature audit_lost reset
Add a method to reset the audit_lost value.

An AUDIT_SET message with the AUDIT_STATUS_LOST flag set by itself
will return a positive value repesenting the current audit_lost value
and reset the counter to zero.  If AUDIT_STATUS_LOST is not the
only flag set, the reset command will be ignored.  The value sent with
the command is ignored.  The return value will be the +ve lost value at
reset time.

An AUDIT_CONFIG_CHANGE message will be queued to the listening audit
daemon.  The message will be a standard CONFIG_CHANGE message with the
fields "lost=0" and "old=" with the latter containing the value of
audit_lost at reset time.

See: https://github.com/linux-audit/audit-kernel/issues/3

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-01-18 14:32:52 -05:00
Linus Torvalds
0110c350c8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more vfs updates from Al Viro:
 "In this pile:

   - autofs-namespace series
   - dedupe stuff
   - more struct path constification"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
  ocfs2: implement the VFS clone_range, copy_range, and dedupe_range features
  ocfs2: charge quota for reflinked blocks
  ocfs2: fix bad pointer cast
  ocfs2: always unlock when completing dio writes
  ocfs2: don't eat io errors during _dio_end_io_write
  ocfs2: budget for extent tree splits when adding refcount flag
  ocfs2: prohibit refcounted swapfiles
  ocfs2: add newlines to some error messages
  ocfs2: convert inode refcount test to a helper
  simple_write_end(): don't zero in short copy into uptodate
  exofs: don't mess with simple_write_{begin,end}
  9p: saner ->write_end() on failing copy into non-uptodate page
  fix gfs2_stuffed_write_end() on short copies
  fix ceph_write_end()
  nfs_write_end(): fix handling of short copies
  vfs: refactor clone/dedupe_file_range common functions
  fs: try to clone files first in vfs_copy_file_range
  vfs: misc struct path constification
  namespace.c: constify struct path passed to a bunch of primitives
  quota: constify struct path in quota_on
  ...
2016-12-17 18:44:00 -08:00
Linus Torvalds
dcdaa2f948 Merge branch 'stable-4.10' of git://git.infradead.org/users/pcmoore/audit
Pull audit updates from Paul Moore:
 "After the small number of patches for v4.9, we've got a much bigger
  pile for v4.10.

  The bulk of these patches involve a rework of the audit backlog queue
  to enable us to move the netlink multicasting out of the task/thread
  that generates the audit record and into the kernel thread that emits
  the record (just like we do for the audit unicast to auditd).

  While we were playing with the backlog queue(s) we fixed a number of
  other little problems with the code, and from all the testing so far
  things look to be in much better shape now. Doing this also allowed us
  to re-enable disabling IRQs for some netns operations ("netns: avoid
  disabling irq for netns id").

  The remaining patches fix some small problems that are well documented
  in the commit descriptions, as well as adding session ID filtering
  support"

* 'stable-4.10' of git://git.infradead.org/users/pcmoore/audit:
  audit: use proper refcount locking on audit_sock
  netns: avoid disabling irq for netns id
  audit: don't ever sleep on a command record/message
  audit: handle a clean auditd shutdown with grace
  audit: wake up kauditd_thread after auditd registers
  audit: rework audit_log_start()
  audit: rework the audit queue handling
  audit: rename the queues and kauditd related functions
  audit: queue netlink multicast sends just like we do for unicast sends
  audit: fixup audit_init()
  audit: move kaudit thread start from auditd registration to kaudit init (#2)
  audit: add support for session ID user filter
  audit: fix formatting of AUDIT_CONFIG_CHANGE events
  audit: skip sessionid sentinel value when auto-incrementing
  audit: tame initialization warning len_abuf in audit_log_execve_info
  audit: less stack usage for /proc/*/loginuid
2016-12-14 14:06:40 -08:00
Steve Grubb
7c397d01e4 audit: Make AUDIT_KERNEL event conform to the specification
The AUDIT_KERNEL event is not following name=value format. This causes
some information to get lost. The event has been reformatted to follow
the convention. Additionally the audit_enabled value was added for
troubleshooting purposes. The following is an example of the new event:

  type=KERNEL audit(1480621249.833:1): state=initialized
              audit_enabled=0 res=1

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
[PM: commit tweaks to make checkpatch.pl happy]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-12-14 15:59:46 -05:00
Richard Guy Briggs
533c7b69c7 audit: use proper refcount locking on audit_sock
Resetting audit_sock appears to be racy.

audit_sock was being copied and dereferenced without using a refcount on
the source sock.

Bump the refcount on the underlying sock when we store a refrence in
audit_sock and release it when we reset audit_sock.  audit_sock
modification needs the audit_cmd_mutex.

See: https://lkml.org/lkml/2016/11/26/232

Thanks to Eric Dumazet <edumazet@google.com> and Cong Wang
<xiyou.wangcong@gmail.com> on ideas how to fix it.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
[PM: fixed the comment block text formatting for auditd_reset()]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-12-14 13:06:04 -05:00
Paul Moore
a09cfa4708 audit: don't ever sleep on a command record/message
Sleeping on a command record/message in audit_log_start() could slow
something, e.g. auditd, from doing something important, e.g. clean
shutdown, which could present problems on a heavily loaded system.
This patch allows tasks to bypass any queue restrictions if they are
logging a command record/message.

Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-12-14 13:06:04 -05:00
Paul Moore
6c54e78996 audit: handle a clean auditd shutdown with grace
When auditd stops cleanly it sets 'auditd_pid' to 0 with an
AUDIT_SET message, in this case we should reset our backlog
queues via the auditd_reset() function.  This patch also adds
a 'auditd_pid' check to the top of kauditd_send_unicast_skb()
so we can fail quicker.

Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-12-14 13:06:04 -05:00
Paul Moore
e1d1662128 audit: wake up kauditd_thread after auditd registers
This patch was suggested by Richard Briggs back in 2015, see the link
to the mail archive below.  Unfortunately, that patch is no longer
even remotely valid due to other changes to the code.

* https://www.redhat.com/archives/linux-audit/2015-October/msg00075.html

Suggested-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-12-14 13:06:04 -05:00
Paul Moore
3197542482 audit: rework audit_log_start()
The backlog queue handling in audit_log_start() is a little odd with
some questionable design decisions, this patch attempts to rectify
this with the following changes:

* Never make auditd wait, ignore any backlog limits as we need auditd
awake so it can drain the backlog queue.

* When we hit a backlog limit and start dropping records, don't wake
all the tasks sleeping on the backlog, that's silly.  Instead, let
kauditd_thread() take care of waking everyone once it has had a chance
to drain the backlog queue.

* Don't keep a global backlog timeout countdown, make it per-task.  A
per-task timer means we won't have all the sleeping tasks waking at
the same time and hammering on an already stressed backlog queue.

Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-12-14 13:06:04 -05:00
Paul Moore
c6480207fd audit: rework the audit queue handling
The audit record backlog queue has always been a bit of a mess, and
the moving the multicast send into kauditd_thread() from
audit_log_end() only makes things worse.  This patch attempts to fix
the backlog queue with a better design that should hold up better
under load and have less of a performance impact at syscall
invocation time.

While it looks like there is a log going on in this patch, the main
change is the move from a single backlog queue to three queues:

* A queue for holding records generated from audit_log_end() that
haven't been consumed by kauditd_thread() (audit_queue).

* A queue for holding records that have been sent via multicast but
had a temporary failure when sending via unicast and need a resend
(audit_retry_queue).

* A queue for holding records that haven't been sent via unicast
because no one is listening (audit_hold_queue).

Special care is taken in this patch to ensure that the proper
record ordering is preserved, e.g. we send everything in the hold
queue first, then the retry queue, and finally the main queue.

Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-12-14 13:06:04 -05:00
Paul Moore
af8b824f28 audit: rename the queues and kauditd related functions
The audit queue names can be shortened and the record sending
helpers associated with the kauditd task could be named better, do
these small cleanups now to make life easier once we start reworking
the queues and kauditd code.

Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-12-14 13:06:04 -05:00
Paul Moore
4aa83872d3 audit: queue netlink multicast sends just like we do for unicast sends
Sending audit netlink multicast messages is bad for all the same
reasons that sending audit netlink unicast messages is bad, so this
patch reworks things so that we don't do the multicast send in
audit_log_end(), we do it from the dedicated kauditd_thread thread just
as we do for unicast messages.

See the GitHub issues below for more information/history:

 * https://github.com/linux-audit/audit-kernel/issues/23
 * https://github.com/linux-audit/audit-kernel/issues/22

Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-12-14 13:06:04 -05:00
Paul Moore
6c92556453 audit: fixup audit_init()
Make sure everything is initialized before we start the kauditd_thread
and don't emit the "initialized" record until everything is finished.
We also panic with a descriptive message if we can't start the
kauditd_thread.

Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-12-14 13:06:04 -05:00
Richard Guy Briggs
55a6f170a4 audit: move kaudit thread start from auditd registration to kaudit init (#2)
Richard made this change some time ago but Eric backed it out because
the rest of the supporting code wasn't ready.  In order to move the
netlink multicast send to kauditd_thread we need to ensure the
kauditd_thread is always running, so restore commit 6ff5e459 ("audit:
move kaudit thread start from auditd registration to kaudit init").

Signed-off-by: Richard Guy Briggs <rbriggs@redhat.com>
[PM: brought forward and merged based on Richard's old patch]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-12-14 13:06:04 -05:00
Al Viro
8bd107633b audit_log_{name,link_denied}: constify struct path
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-05 19:00:38 -05:00
WANG Cong
6060298272 audit: remove useless synchronize_net()
netlink kernel socket is protected by refcount, not RCU.
Its rcv path is neither protected by RCU. So the synchronize_net()
is just pointless.

Cc: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01 11:29:02 -05:00
Alexey Dobriyan
c7d03a00b5 netns: make struct pernet_operations::id unsigned int
Make struct pernet_operations::id unsigned.

There are 2 reasons to do so:

1)
This field is really an index into an zero based array and
thus is unsigned entity. Using negative value is out-of-bound
access by definition.

2)
On x86_64 unsigned 32-bit data which are mixed with pointers
via array indexing or offsets added or subtracted to pointers
are preffered to signed 32-bit data.

"int" being used as an array index needs to be sign-extended
to 64-bit before being used.

	void f(long *p, int i)
	{
		g(p[i]);
	}

  roughly translates to

	movsx	rsi, esi
	mov	rdi, [rsi+...]
	call 	g

MOVSX is 3 byte instruction which isn't necessary if the variable is
unsigned because x86_64 is zero extending by default.

Now, there is net_generic() function which, you guessed it right, uses
"int" as an array index:

	static inline void *net_generic(const struct net *net, int id)
	{
		...
		ptr = ng->ptr[id - 1];
		...
	}

And this function is used a lot, so those sign extensions add up.

Patch snipes ~1730 bytes on allyesconfig kernel (without all junk
messing with code generation):

	add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730)

Unfortunately some functions actually grow bigger.
This is a semmingly random artefact of code generation with register
allocator being used differently. gcc decides that some variable
needs to live in new r8+ registers and every access now requires REX
prefix. Or it is shifted into r12, so [r12+0] addressing mode has to be
used which is longer than [r8]

However, overall balance is in negative direction:

	add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730)
	function                                     old     new   delta
	nfsd4_lock                                  3886    3959     +73
	tipc_link_build_proto_msg                   1096    1140     +44
	mac80211_hwsim_new_radio                    2776    2808     +32
	tipc_mon_rcv                                1032    1058     +26
	svcauth_gss_legacy_init                     1413    1429     +16
	tipc_bcbase_select_primary                   379     392     +13
	nfsd4_exchange_id                           1247    1260     +13
	nfsd4_setclientid_confirm                    782     793     +11
		...
	put_client_renew_locked                      494     480     -14
	ip_set_sockfn_get                            730     716     -14
	geneve_sock_add                              829     813     -16
	nfsd4_sequence_done                          721     703     -18
	nlmclnt_lookup_host                          708     686     -22
	nfsd4_lockt                                 1085    1063     -22
	nfs_get_client                              1077    1050     -27
	tcf_bpf_init                                1106    1076     -30
	nfsd4_encode_fattr                          5997    5930     -67
	Total: Before=154856051, After=154854321, chg -0.00%

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18 10:59:15 -05:00
Linus Torvalds
3cd013ab79 Merge branch 'stable-4.9' of git://git.infradead.org/users/pcmoore/audit
Pull audit updates from Paul Moore:
 "Another relatively small pull request for v4.9 with just two patches.

  The patch from Richard updates the list of features we support and
  report back to userspace; this should have been sent earlier with the
  rest of the v4.8 patches but it got lost in my inbox.

  The second patch fixes a problem reported by our Android friends where
  we weren't very consistent in recording PIDs"

* 'stable-4.9' of git://git.infradead.org/users/pcmoore/audit:
  audit: add exclude filter extension to feature bitmap
  audit: consistently record PIDs with task_tgid_nr()
2016-10-04 14:21:41 -07:00
Paul Moore
fa2bea2f5c audit: consistently record PIDs with task_tgid_nr()
Unfortunately we record PIDs in audit records using a variety of
methods despite the correct way being the use of task_tgid_nr().
This patch converts all of these callers, except for the case of
AUDIT_SET in audit_receive_msg() (see the comment in the code).

Reported-by: Jeff Vander Stoep <jeffv@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-08-30 17:19:13 -04:00
Linus Torvalds
797cee982e Merge branch 'stable-4.8' of git://git.infradead.org/users/pcmoore/audit
Pull audit updates from Paul Moore:
 "Six audit patches for 4.8.

  There are a couple of style and minor whitespace tweaks for the logs,
  as well as a minor fixup to catch errors on user filter rules, however
  the major improvements are a fix to the s390 syscall argument masking
  code (reviewed by the nice s390 folks), some consolidation around the
  exclude filtering (less code, always a win), and a double-fetch fix
  for recording the execve arguments"

* 'stable-4.8' of git://git.infradead.org/users/pcmoore/audit:
  audit: fix a double fetch in audit_log_single_execve_arg()
  audit: fix whitespace in CWD record
  audit: add fields to exclude filter by reusing user filter
  s390: ensure that syscall arguments are properly masked on s390
  audit: fix some horrible switch statement style crimes
  audit: fixup: log on errors from filter user rules
2016-07-29 17:54:17 -07:00
Linus Torvalds
89a82a9218 Merge branch 'stable-4.7' of git://git.infradead.org/users/pcmoore/audit
Pull audit fixes from Paul Moore:
 "Two small patches to fix audit problems in 4.7-rcX: the first fixes a
  potential kref leak, the second removes some header file noise.

  The first is an important bug fix that really should go in before 4.7
  is released, the second is not critical, but falls into the very-nice-
  to-have category so I'm including in the pull request.

  Both patches are straightforward, self-contained, and pass our
  testsuite without problem"

* 'stable-4.7' of git://git.infradead.org/users/pcmoore/audit:
  audit: move audit_get_tty to reduce scope and kabi changes
  audit: move calcs after alloc and check when logging set loginuid
2016-06-29 15:18:47 -07:00
Richard Guy Briggs
3f5be2da85 audit: move audit_get_tty to reduce scope and kabi changes
The only users of audit_get_tty and audit_put_tty are internal to
audit, so move it out of include/linux/audit.h to kernel.h and create
a proper function rather than inlining it.  This also reduces kABI
changes.

Suggested-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: line wrapped description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-28 15:48:48 -04:00
Richard Guy Briggs
86b2efbe3a audit: add fields to exclude filter by reusing user filter
RFE: add additional fields for use in audit filter exclude rules
https://github.com/linux-audit/audit-kernel/issues/5

Re-factor and combine audit_filter_type() with audit_filter_user() to
use audit_filter_user_rules() to enable the exclude filter to
additionally filter on PID, UID, GID, AUID, LOGINUID_SET, SUBJ_*.

The process of combining the similar audit_filter_user() and
audit_filter_type() functions, required inverting the meaning and
including the ALWAYS action of the latter.

Include audit_filter_user_rules() into audit_filter(), removing
unneeded logic in the process.

Keep the check to quit early if the list is empty.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: checkpatch.pl fixes - whitespace damage, wrapped description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27 11:01:00 -04:00
Linus Torvalds
03e1aa1cbb Merge branch 'stable-4.7' of git://git.infradead.org/users/pcmoore/audit
Pull audit updates from Paul Moore:
 "Four small audit patches for 4.7.

  Two are simple cleanups around the audit thread management code, one
  adds a tty field to AUDIT_LOGIN events, and the final patch makes
  tty_name() usable regardless of CONFIG_TTY.

  Nothing controversial, and it all passes our regression test"

* 'stable-4.7' of git://git.infradead.org/users/pcmoore/audit:
  tty: provide tty_name() even without CONFIG_TTY
  audit: add tty field to LOGIN event
  audit: we don't need to __set_current_state(TASK_RUNNING)
  audit: cleanup prune_tree_thread
2016-05-18 18:46:55 -07:00
Richard Guy Briggs
db0a6fb5d9 audit: add tty field to LOGIN event
The tty field was missing from AUDIT_LOGIN events.

Refactor code to create a new function audit_get_tty(), using it to
replace the call in audit_log_task_info() and to add it to
audit_log_set_loginuid().  Lock and bump the kref to protect it, adding
audit_put_tty() alias to decrement it.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-04-26 17:19:16 -04:00
Paul Moore
7ffb8e317b audit: we don't need to __set_current_state(TASK_RUNNING)
Remove the calls to __set_current_state() to mark the task as running
and do some related cleanup in wait_for_auditd() to limit the amount
of work we do when we aren't going to reschedule the current task.

Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-04-04 16:44:02 -04:00
Linus Torvalds
51b3eae8db Merge branch 'stable-4.6' of git://git.infradead.org/users/pcmoore/audit
Pull audit updates from Paul Moore:
 "A small set of patches for audit this time; just three in total and
  one is a spelling fix.

  The two patches with actual content are designed to help prevent new
  instances of auditd from displacing an existing, functioning auditd
  and to generate a log of the attempt.  Not to worry, dead/stuck auditd
  instances can still be replaced by a new instance without problem.

  Nothing controversial, and everything passes our regression suite"

* 'stable-4.6' of git://git.infradead.org/users/pcmoore/audit:
  audit: Fix typo in comment
  audit: log failed attempts to change audit_pid configuration
  audit: stop an old auditd being starved out by a new auditd
2016-03-19 17:52:49 -07:00
Peter Hurley
2e28d38ae1 tty: audit: Handle tty audit enable atomically
The audit_tty and audit_tty_log_passwd fields are actually bool
values, so merge into single memory location to access atomically.

NB: audit log operations may still occur after tty audit is disabled
which is consistent with the existing functionality

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27 16:41:04 -08:00
Peter Hurley
37282a7795 tty: audit: Combine push functions
tty_audit_push() and tty_audit_push_current() perform identical
tasks; eliminate the tty_audit_push() implementation and the
tty_audit_push_current() name.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27 16:41:04 -08:00
Richard Guy Briggs
935c9e7ff0 audit: log failed attempts to change audit_pid configuration
Failed attempts to change the audit_pid configuration are not presently
logged.  One case is an attempt to starve an old auditd by starting up
a new auditd when the old one is still alive and active.  The other
case is an attempt to orphan a new auditd when an old auditd shuts
down.

Log both as AUDIT_CONFIG_CHANGE messages with failure result.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
2016-01-25 18:04:15 -05:00
Richard Guy Briggs
133e1e5acd audit: stop an old auditd being starved out by a new auditd
Nothing prevents a new auditd starting up and replacing a valid
audit_pid when an old auditd is still running, effectively starving out
the old auditd since audit_pid no longer points to the old valid
auditd.

If no message to auditd has been attempted since auditd died
unnaturally or got killed, audit_pid will still indicate it is alive.
There isn't an easy way to detect if an old auditd is still running on
the existing audit_pid other than attempting to send a message to see
if it fails.  An -ECONNREFUSED almost certainly means it disappeared
and can be replaced.  Other errors are not so straightforward and may
indicate transient problems that will resolve themselves and the old
auditd will recover.  Yet others will likely need manual intervention
for which a new auditd will not solve the problem.

Send a new message type (AUDIT_REPLACE) to the old auditd containing a
u32 with the PID of the new auditd.  If the audit replace message
succeeds (or doesn't fail with certainty), fail to register the new
auditd and return an error (-EEXIST).

This is expected to make the patch preventing an old auditd orphaning a
new auditd redundant.

V3: Switch audit message type from 1000 to 1300 block.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
2016-01-25 18:04:15 -05:00
Linus Torvalds
5807fcaa9b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:

 - EVM gains support for loading an x509 cert from the kernel
   (EVM_LOAD_X509), into the EVM trusted kernel keyring.

 - Smack implements 'file receive' process-based permission checking for
   sockets, rather than just depending on inode checks.

 - Misc enhancments for TPM & TPM2.

 - Cleanups and bugfixes for SELinux, Keys, and IMA.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (41 commits)
  selinux: Inode label revalidation performance fix
  KEYS: refcount bug fix
  ima: ima_write_policy() limit locking
  IMA: policy can be updated zero times
  selinux: rate-limit netlink message warnings in selinux_nlmsg_perm()
  selinux: export validatetrans decisions
  gfs2: Invalid security labels of inodes when they go invalid
  selinux: Revalidate invalid inode security labels
  security: Add hook to invalidate inode security labels
  selinux: Add accessor functions for inode->i_security
  security: Make inode argument of inode_getsecid non-const
  security: Make inode argument of inode_getsecurity non-const
  selinux: Remove unused variable in selinux_inode_init_security
  keys, trusted: seal with a TPM2 authorization policy
  keys, trusted: select hash algorithm for TPM2 chips
  keys, trusted: fix: *do not* allow duplicate key options
  tpm_ibmvtpm: properly handle interrupted packet receptions
  tpm_tis: Tighten IRQ auto-probing
  tpm_tis: Refactor the interrupt setup
  tpm_tis: Get rid of the duplicate IRQ probing code
  ...
2016-01-17 19:13:15 -08:00
Markus Elfring
d865e573b8 audit: Delete unnecessary checks before two function calls
The functions consume_skb() and kfree_skb() test whether their argument
is NULL and then return immediately.
Thus the tests around their calls are not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
[PM: tweak patch prefix]
Signed-off-by: Paul Moore <pmoore@redhat.com>
2016-01-13 09:18:55 -05:00
Richard Guy Briggs
1194b994be audit: wake up threads if queue switched from limited to unlimited
If the audit_backlog_limit is changed from a limited value to an
unlimited value (zero) while the queue was overflowed, wake up the
audit_backlog_wait queue to allow those processes to continue.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
2016-01-13 09:18:54 -05:00
Richard Guy Briggs
f48a942926 audit: include auditd's threads in audit_log_start() wait exception
Should auditd spawn threads, allow all members of its thread group to
use the audit_backlog_limit reserves to bypass the queue limits too.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: minor upstream merge tweaks]
Signed-off-by: Paul Moore <pmoore@redhat.com>
2016-01-13 09:15:19 -05:00
Paul Moore
eb8baf6aa3 audit: remove audit_backlog_wait_overflow
It seems much more obvious and readable to simply use "0".

Signed-off-by: Paul Moore <pmoore@redhat.com>
2016-01-13 09:15:18 -05:00
Richard Guy Briggs
c4b7a7755f audit: don't needlessly reset valid wait time
After auditd has recovered from an overflowed queue, the first process
that doesn't use reserves to make it through the queue checks should
reset the audit backlog wait time to the configured value.  After that,
there is no need to keep resetting it.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
2016-01-13 09:15:18 -05:00
Andreas Gruenbacher
d6335d77a7 security: Make inode argument of inode_getsecid non-const
Make the inode argument of the inode_getsecid hook non-const so that we
can use it to revalidate invalid security labels.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-12-24 11:09:39 -05:00