dgap_sindex() is being only called from dgap_getword() which searches
for either ' ' or '\t' or '\n'. this part of the code with '^' at the
beginning is never used.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
the remove callback will be called in two cases, 1) if the driver is
removed and 2) if the pci device is removed. as of now all the board
cleanups were being done in the module unload section so if the module
is unloaded everything works. But if the pci device is removed then the
loaded driver will be left in an inconsistent state.
So moved the cleanups in the remove callback and since there was no
reference of dgap_driver in remove_one(), so had to define the
pci_driver in the function.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
move the cleanup function before the remove call as the next patch of
the series is going to use that.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function setup_timer combines the initialization of a timer with the
initialization of the timer's function and data fields.
So, this patch combines the multiline code for timer initialization using the function
setup_timer. This issue is identified via coccinelle script.
@@
expression E1, E2, E3;
type T;
@@
- init_timer(&E1);
...
(
- E1.function = E2;
...
- E1.data = (T)E3;
+ setup_timer(&E1, E2, (T)E3);
|
- E1.data = (T)E3;
...
- E1.function = E2;
+ setup_timer(&E1, E2, (T)E3);
|
- E1.function = E2;
+ setup_timer(&E1, E2, 0);
)
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes variable that was used to store only the return value of a function call.
The issue was detected and resolved using the following coccinelle script:
@@
expression ret;
identifier f;
@@
-ret =
+return
f(...);
-return ret;
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Building for ARM64 leads to the following build warning:
In file included from drivers/staging/dgap/dgap.c:66:0:
drivers/staging/dgap/dgap.h:124:0: warning: "PCI_IO_SIZE" redefined
#define PCI_IO_SIZE 0x00200000
^
In file included from ./arch/arm64/include/asm/page.h:66:0,
from include/linux/mm_types.h:15,
from include/linux/sched.h:27,
from ./arch/arm64/include/asm/compat.h:25,
from ./arch/arm64/include/asm/stat.h:23,
from include/linux/stat.h:5,
from include/linux/module.h:10,
from drivers/staging/dgap/dgap.c:47:
./arch/arm64/include/asm/memory.h:39:0: note: this is the location of the previous definition
#define PCI_IO_SIZE SZ_16M
^
Use PCI_IO_SIZE_DGAP to avoid the name collision.
Reported-by: Olof's autobuilder <build@lixom.net>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes a variable that was simply used to
store the return value of a function call before
returning it.
The issue was detected and resolved using the following
coccinelle script:
@@
identifier len,f;
@@
-int len;
... when != len
when strict
-len =
+return
f(...);
-return len;
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch.pl warning:
WARNING:Missing a blank line after declaration
Signed-off-by: Anjana Sasindran <anjanasasindran123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
use find_board_by_major function instead of getting a brd from static
arrary. Becasue tty's major number doesn't start zero and we can
find a brd from dgap_board[].
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The board_t has a tty_struct(serial_driver and print_driver)
that has a major number. When major number is compared in
dgap_tty_open(), just use brd->serial_driver{print_driver}->major.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tty_struct of serial_driver and print_driver were getting
allocated twice. One is allocated in tty_alloc_driver(), the other
is in dgap_tty_register(). So remove these in dgap_tty_register().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty's flags can be set by calling tty_alloc_driver().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dgap_init_global() initialize the dgap_board
that is a global variable as static and dgap_poll_timer.
But init_timer() is called twice in dgap_start() and dgap_board
doesn't need to be initialized to NULL.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cast on NULL to a pointer type is not required. This
patch removes NULL casted to some pointer type.
The sematic patch used is:
@r@
type T;
@@
- (T *)NULL
+ NULL
Build tested it.
Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
void pointers do not need to be cast to other pointer types.
The semantic patch used to find this:
@r@
expression x;
void* e;
type T;
identifier f;
@@
(
*((T *)e)
|
((T *)x)[...]
|
((T *)x)->f
|
- (T *)
e
)
Build tested it.
Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following semantic patch is used to do this
@r exists@ // find anything that might decrement the variable
identifier i;
expression E;
position p;
@@
int i@p;
...
(
&i
|
i--
|
--i
|
i-=E
|
i+=E
)
@x disable decl_init@
identifier r.i;
expression E;
position p1 != r.p;
@@
(
volatile int i = 0;
|
volatile int i;
|
+ unsigned
int i@p1 = 0;
|
+ unsigned
int i@p1;
)
<... when != i = E
(
i = 0
|
i = 1
)
...>
Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dgap_init_module() need to unwind for cleanup variables properly.
Because dgap_init_module() calls dgap_cleanup_module() for freeing
variables but this function is possible to free variables
which are not allocated.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dgap_do_remap() and dgap_release_remap() names could be
changed to dgap_remap() and dgap_unmap().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dgap_release_remap() function is only called after the memory
has been remapped so if statement for checking NULL doesn't
need.
And also release_mem_region() calls are moved after iounmap() calls.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes sparse warning
warning: variable ‘orig_count’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just simply use dgap_release_remap() in dgap_cleanup_board() for
releasing map memory.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using schedule_timeout_interruptible() is exactly same as
setting a status of current process and calling schedule_timeout().
Removes dgap_ms_sleep(), because this function is used
only when closing tty channel on dgap_tty_close().
And also removes ch_close_delay that is always set to 250
on dgap_tty_init().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The use_interrupts is used only in dagp_request_irq() for checking
a value from user config file. It doesn't need in board_t struct.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The brd(board_t) is initialized with zero, so "intr_used"
is not needed to set zero when request_irq() is failed.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* use dev_{warn,err} instead of pr_{warn,err}
* removes dgap_err() and just use pr_err(). pr_err() used in
dgap_parsefile() not dev_err() because if dgap_parsefile() is
failed, just one message is printed.
* removes "out of memory" messages.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is same manner with setting a board type.
After allocating a type of "MNODE", get a token value
set to "module.type".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is same manner with setting a board type.
For example of config file for concentrator,
"conc ccon" or
"conc epcon"
After allocating a type of "CNODE" then set a type of concentrator.
So remove cases in swith statement, just get a token from string
and set to "conc.type". And also it doesn't need to "conc.v_type".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Board types need to separate normal command like IO, MEM and so on.
And the board type will come after "board" string in config file normally.
(If it is not, dgap_gettok returns an error with zero)
After that, set a variable of a number which is matched with specific
a board number to "board.type". The dgap_gettok() returns that number so
just set to "board.type" and also "v_type" can be removed.
In case of boards of PCI type are set variables to zero. These can
be removed because "p" as cnode get memory from kzalloc so already
set to zero.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If true_count is not same with brd->nasync, warning messages are
printed. But it has duplicated messages within if statement.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are already defined in dgap.h.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dgap_major_serial_registered and dgap_major_transparent_print_registered
could be checked whether a board is initialized.
But it doesn't need to check that variables becasue dgap module
isn't calling the dgap_cleanup_tty() without initializing
for a board completely.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a configration file is parsed with dgap_parsefile(),
makes nodes for saving configrations for board.
Making a node will allocate node memory and strings for saving
configrations with kstrdup().
So these are freed when dgap is unloaded or failed to initialize.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Tested-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dgap_newnode() is useless for creating new node.
So just use kzalloc and set a type in case statement.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If rc is zero, this function will returns with an error and
cannot reach switch-case statement.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The retval in dgap_block_til_ready() is initialized to zero,
and if no error has occurred in this function, the retval has a zero.
So it doesn't need to check "retval" itself.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checks in dgap_tty_digisetcustombaud() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch", "bd and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checks in dgap_tty_digigetcustombaud() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch" and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checks in dgap_tty_digisetedelay() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch", "bd and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checks in dgap_set_modem_info() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch", "bd" and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checks in dgap_tty_digigeta() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch" and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checks in dgap_tty_digiseta() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch" and "bd" which are used in dgap_tty_digiseta().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
