This patch allows to auto create BPF_MAP_TYPE_ARRAY_OF_MAPS and
BPF_MAP_TYPE_HASH_OF_MAPS with values of BPF_MAP_TYPE_PERF_EVENT_ARRAY
by bpf_object__load().
Previous behaviour created a zero filled btf_map_def for inner maps and
tried to use it for a map creation but the linux kernel forbids to create
a BPF_MAP_TYPE_PERF_EVENT_ARRAY map with max_entries=0.
Fixes: 646f02ffdd ("libbpf: Add BTF-defined map-in-map support")
Signed-off-by: Andrey Grafin <conquistador@yandex-team.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20240117130619.9403-1-conquistador@yandex-team.ru
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
On kernel that don't support arg:ctx tag, before adjusting global
subprog BTF information to match kernel's expected canonical type names,
make sure that types used by user are meaningful, and if not, warn and
don't do BTF adjustments.
This is similar to checks that kernel performs, but narrower in scope,
as only a small subset of BPF program types can be accommodated by
libbpf using canonical type names.
Libbpf unconditionally allows `struct pt_regs *` for perf_event program
types, unlike kernel, which supports that conditionally on architecture.
This is done to keep things simple and not cause unnecessary false
positives. This seems like a minor and harmless deviation, which in
real-world programs will be caught by kernels with arg:ctx tag support
anyways. So KISS principle.
This logic is hard to test (especially on latest kernels), so manual
testing was performed instead. Libbpf emitted the following warning for
perf_event program with wrong context argument type:
libbpf: prog 'arg_tag_ctx_perf': subprog 'subprog_ctx_tag' arg#0 is expected to be of `struct bpf_perf_event_data *` type
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240118033143.3384355-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add feature detector of kernel-side arg:ctx (__arg_ctx) tag support. If
this is detected, libbpf will avoid doing any __arg_ctx-related BTF
rewriting and checks in favor of letting kernel handle this completely.
test_global_funcs/ctx_arg_rewrite subtest is adjusted to do the same
feature detection (albeit in much simpler, though round-about and
inefficient, way), and skip the tests. This is done to still be able to
execute this test on older kernels (like in libbpf CI).
Note, BPF token series ([0]) does a major refactor and code moving of
libbpf-internal feature detection "framework", so to avoid unnecessary
conflicts we keep newly added feature detection stand-alone with ad-hoc
result caching. Once things settle, there will be a small follow up to
re-integrate everything back and move code into its final place in
newly-added (by BPF token series) features.c file.
[0] https://patchwork.kernel.org/project/netdevbpf/list/?series=814209&state=*
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240118033143.3384355-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Out of all special global func arg tag annotations, __arg_ctx is
practically is the most immediately useful and most critical to have
working across multitude kernel version, if possible. This would allow
end users to write much simpler code if __arg_ctx semantics worked for
older kernels that don't natively understand btf_decl_tag("arg:ctx") in
verifier logic.
Luckily, it is possible to ensure __arg_ctx works on old kernels through
a bit of extra work done by libbpf, at least in a lot of common cases.
To explain the overall idea, we need to go back at how context argument
was supported in global funcs before __arg_ctx support was added. This
was done based on special struct name checks in kernel. E.g., for
BPF_PROG_TYPE_PERF_EVENT the expectation is that argument type `struct
bpf_perf_event_data *` mark that argument as PTR_TO_CTX. This is all
good as long as global function is used from the same BPF program types
only, which is often not the case. If the same subprog has to be called
from, say, kprobe and perf_event program types, there is no single
definition that would satisfy BPF verifier. Subprog will have context
argument either for kprobe (if using bpf_user_pt_regs_t struct name) or
perf_event (with bpf_perf_event_data struct name), but not both.
This limitation was the reason to add btf_decl_tag("arg:ctx"), making
the actual argument type not important, so that user can just define
"generic" signature:
__noinline int global_subprog(void *ctx __arg_ctx) { ... }
I won't belabor how libbpf is implementing subprograms, see a huge
comment next to bpf_object_relocate_calls() function. The idea is that
each main/entry BPF program gets its own copy of global_subprog's code
appended.
This per-program copy of global subprog code *and* associated func_info
.BTF.ext information, pointing to FUNC -> FUNC_PROTO BTF type chain
allows libbpf to simulate __arg_ctx behavior transparently, even if the
kernel doesn't yet support __arg_ctx annotation natively.
The idea is straightforward: each time we append global subprog's code
and func_info information, we adjust its FUNC -> FUNC_PROTO type
information, if necessary (that is, libbpf can detect the presence of
btf_decl_tag("arg:ctx") just like BPF verifier would do it).
The rest is just mechanical and somewhat painful BTF manipulation code.
It's painful because we need to clone FUNC -> FUNC_PROTO, instead of
reusing it, as same FUNC -> FUNC_PROTO chain might be used by another
main BPF program within the same BPF object, so we can't just modify it
in-place (and cloning BTF types within the same struct btf object is
painful due to constant memory invalidation, see comments in code).
Uploaded BPF object's BTF information has to work for all BPF
programs at the same time.
Once we have FUNC -> FUNC_PROTO clones, we make sure that instead of
using some `void *ctx` parameter definition, we have an expected `struct
bpf_perf_event_data *ctx` definition (as far as BPF verifier and kernel
is concerned), which will mark it as context for BPF verifier. Same
global subprog relocated and copied into another main BPF program will
get different type information according to main program's type. It all
works out in the end in a completely transparent way for end user.
Libbpf maintains internal program type -> expected context struct name
mapping internally. Note, not all BPF program types have named context
struct, so this approach won't work for such programs (just like it
didn't before __arg_ctx). So native __arg_ctx is still important to have
in kernel to have generic context support across all BPF program types.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With all the preparations in previous patches done we are ready to
postpone BTF loading and sanitization step until after all the
relocations are performed.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move the logic of finding and assigning exception callback indices from
BTF sanitization step to program relocations step, which seems more
logical and will unblock moving BTF loading to after relocation step.
Exception callbacks discovery and assignment has no dependency on BTF
being loaded into the kernel, it only uses BTF information. It does need
to happen before subprogram relocations happen, though. Which is why the
split.
No functional changes.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move map creation to later during BPF object loading by pre-creating
stable placeholder FDs (utilizing memfd_create()). Use dup2()
syscall to then atomically make those placeholder FDs point to real
kernel BPF map objects.
This change allows to delay BPF map creation to after all the BPF
program relocations. That, in turn, allows to delay BTF finalization and
loading into kernel to after all the relocations as well. We'll take
advantage of the latter in subsequent patches to allow libbpf to adjust
BTF in a way that helps with BPF global function usage.
Clean up a few places where we close map->fd, which now shouldn't
happen, because map->fd should be a valid FD regardless of whether map
was created or not. Surprisingly and nicely it simplifies a bunch of
error handling code. If this change doesn't backfire, I'm tempted to
pre-create such stable FDs for other entities (progs, maybe even BTF).
We previously did some manipulations to make gen_loader work with fake
map FDs, with stable map FDs this hack is not necessary for maps (we
still have it for BTF, but I left it as is for now).
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With the upcoming switch to preallocated placeholder FDs for maps,
switch various getters/setter away from checking map->fd. Use
map_is_created() helper that detect whether BPF map can be modified based
on map->obj->loaded state, with special provision for maps set up with
bpf_map__reuse_fd().
For backwards compatibility, we take map_is_created() into account in
bpf_map__fd() getter as well. This way before bpf_object__load() phase
bpf_map__fd() will always return -1, just as before the changes in
subsequent patches adding stable map->fd placeholders.
We also get rid of all internal uses of bpf_map__fd() getter, as it's
more oriented for uses external to libbpf. The above map_is_created()
check actually interferes with some of the internal uses, if map FD is
fetched through bpf_map__fd().
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of inferring whether map already point to previously
created/pinned BPF map (which user can specify with bpf_map__reuse_fd()) API),
use explicit map->reused flag that is set in such case.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It makes future grepping and code analysis a bit easier.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
An issue occurred while reading an ELF file in libbpf.c during fuzzing:
Program received signal SIGSEGV, Segmentation fault.
0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206
4206 in libbpf.c
(gdb) bt
#0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206
#1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706
#2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437
#3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497
#4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16
#5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one ()
#6 0x000000000087ad92 in tracing::span::Span::in_scope ()
#7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir ()
#8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} ()
#9 0x00000000005f2601 in main ()
(gdb)
scn_data was null at this code(tools/lib/bpf/src/libbpf.c):
if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) {
The scn_data is derived from the code above:
scn = elf_sec_by_idx(obj, sec_idx);
scn_data = elf_sec_data(obj, scn);
relo_sec_name = elf_sec_str(obj, shdr->sh_name);
sec_name = elf_sec_name(obj, scn);
if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL
return -EINVAL;
In certain special scenarios, such as reading a malformed ELF file,
it is possible that scn_data may be a null pointer
Signed-off-by: Mingyi Zhang <zhangmingyi5@huawei.com>
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Changye Wu <wuchangye@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231221033947.154564-1-liuxin350@huawei.com
clang can generate (with -g -Wa,--compress-debug-sections) 4-byte
aligned DWARF sections that declare themselves to be 8-byte aligned in
the section header. Since DWARF sections are dropped during linking
anyway, just skip running the sanity checks on them.
Reported-by: Sergei Trofimovich <slyich@gmail.com>
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://lore.kernel.org/bpf/ZXcFRJVKbKxtEL5t@nz.home/
Link: https://lore.kernel.org/bpf/20231219110324.8989-1-hi@alyssa.is
Add a set of __arg_xxx macros which can be used to augment BPF global
subprogs/functions with extra information for use by BPF verifier.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231215011334.2307144-9-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To allow external admin authority to override default BPF FS location
(/sys/fs/bpf) for implicit BPF token creation, teach libbpf to recognize
LIBBPF_BPF_TOKEN_PATH envvar. If it is specified and user application
didn't explicitly specify neither bpf_token_path nor bpf_token_fd
option, it will be treated exactly like bpf_token_path option,
overriding default /sys/fs/bpf location and making BPF token mandatory.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add BPF token support to BPF object-level functionality.
BPF token is supported by BPF object logic either as an explicitly
provided BPF token from outside (through BPF FS path or explicit BPF
token FD), or implicitly (unless prevented through
bpf_object_open_opts).
Implicit mode is assumed to be the most common one for user namespaced
unprivileged workloads. The assumption is that privileged container
manager sets up default BPF FS mount point at /sys/fs/bpf with BPF token
delegation options (delegate_{cmds,maps,progs,attachs} mount options).
BPF object during loading will attempt to create BPF token from
/sys/fs/bpf location, and pass it for all relevant operations
(currently, map creation, BTF load, and program load).
In this implicit mode, if BPF token creation fails due to whatever
reason (BPF FS is not mounted, or kernel doesn't support BPF token,
etc), this is not considered an error. BPF object loading sequence will
proceed with no BPF token.
In explicit BPF token mode, user provides explicitly either custom BPF
FS mount point path or creates BPF token on their own and just passes
token FD directly. In such case, BPF object will either dup() token FD
(to not require caller to hold onto it for entire duration of BPF object
lifetime) or will attempt to create BPF token from provided BPF FS
location. If BPF token creation fails, that is considered a critical
error and BPF object load fails with an error.
Libbpf provides a way to disable implicit BPF token creation, if it
causes any troubles (BPF token is designed to be completely optional and
shouldn't cause any problems even if provided, but in the world of BPF
LSM, custom security logic can be installed that might change outcome
dependin on the presence of BPF token). To disable libbpf's default BPF
token creation behavior user should provide either invalid BPF token FD
(negative), or empty bpf_token_path option.
BPF token presence can influence libbpf's feature probing, so if BPF
object has associated BPF token, feature probing is instructed to use
BPF object-specific feature detection cache and token FD.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adjust feature probing callbacks to take into account optional token_fd.
In unprivileged contexts, some feature detectors would fail to detect
kernel support just because BPF program, BPF map, or BTF object can't be
loaded due to privileged nature of those operations. So when BPF object
is loaded with BPF token, this token should be used for feature probing.
This patch is setting support for this scenario, but we don't yet pass
non-zero token FD. This will be added in the next patch.
We also switched BPF cookie detector from using kprobe program to
tracepoint one, as tracepoint is somewhat less dangerous BPF program
type and has higher likelihood of being allowed through BPF token in the
future. This change has no effect on detection behavior.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It's quite a lot of well isolated code, so it seems like a good
candidate to move it out of libbpf.c to reduce its size.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add feat_supported() helper that accepts feature cache instead of
bpf_object. This allows low-level code in bpf.c to not know or care
about higher-level concept of bpf_object, yet it will be able to utilize
custom feature checking in cases where BPF token might influence the
outcome.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Split a list of supported feature detectors with their corresponding
callbacks from actual cached supported/missing values. This will allow
to have more flexible per-token or per-object feature detectors in
subsequent refactorings.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
=== Motivation ===
Similar to reading from CO-RE bitfields, we need a CO-RE aware bitfield
writing wrapper to make the verifier happy.
Two alternatives to this approach are:
1. Use the upcoming `preserve_static_offset` [0] attribute to disable
CO-RE on specific structs.
2. Use broader byte-sized writes to write to bitfields.
(1) is a bit hard to use. It requires specific and not-very-obvious
annotations to bpftool generated vmlinux.h. It's also not generally
available in released LLVM versions yet.
(2) makes the code quite hard to read and write. And especially if
BPF_CORE_READ_BITFIELD() is already being used, it makes more sense to
to have an inverse helper for writing.
=== Implementation details ===
Since the logic is a bit non-obvious, I thought it would be helpful
to explain exactly what's going on.
To start, it helps by explaining what LSHIFT_U64 (lshift) and RSHIFT_U64
(rshift) is designed to mean. Consider the core of the
BPF_CORE_READ_BITFIELD() algorithm:
val <<= __CORE_RELO(s, field, LSHIFT_U64);
val = val >> __CORE_RELO(s, field, RSHIFT_U64);
Basically what happens is we lshift to clear the non-relevant (blank)
higher order bits. Then we rshift to bring the relevant bits (bitfield)
down to LSB position (while also clearing blank lower order bits). To
illustrate:
Start: ........XXX......
Lshift: XXX......00000000
Rshift: 00000000000000XXX
where `.` means blank bit, `0` means 0 bit, and `X` means bitfield bit.
After the two operations, the bitfield is ready to be interpreted as a
regular integer.
Next, we want to build an alternative (but more helpful) mental model
on lshift and rshift. That is, to consider:
* rshift as the total number of blank bits in the u64
* lshift as number of blank bits left of the bitfield in the u64
Take a moment to consider why that is true by consulting the above
diagram.
With this insight, we can now define the following relationship:
bitfield
_
| |
0.....00XXX0...00
| | | |
|______| | |
lshift | |
|____|
(rshift - lshift)
That is, we know the number of higher order blank bits is just lshift.
And the number of lower order blank bits is (rshift - lshift).
Finally, we can examine the core of the write side algorithm:
mask = (~0ULL << rshift) >> lshift; // 1
val = (val & ~mask) | ((nval << rpad) & mask); // 2
1. Compute a mask where the set bits are the bitfield bits. The first
left shift zeros out exactly the number of blank bits, leaving a
bitfield sized set of 1s. The subsequent right shift inserts the
correct amount of higher order blank bits.
2. On the left of the `|`, mask out the bitfield bits. This creates
0s where the new bitfield bits will go. On the right of the `|`,
bring nval into the correct bit position and mask out any bits
that fall outside of the bitfield. Finally, by bor'ing the two
halves, we get the final set of bits to write back.
[0]: https://reviews.llvm.org/D133361
Co-developed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Co-developed-by: Jonathan Lemon <jlemon@aviatrix.com>
Signed-off-by: Jonathan Lemon <jlemon@aviatrix.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/4d3dd215a4fd57d980733886f9c11a45e1a9adf3.1702325874.git.dxu@dxuuu.xyz
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Before the change on `i686-linux` `systemd` build failed as:
$ bpftool gen object src/core/bpf/socket_bind/socket-bind.bpf.o src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o
Error: failed to link 'src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o': Invalid argument (22)
After the change it fails as:
$ bpftool gen object src/core/bpf/socket_bind/socket-bind.bpf.o src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o
libbpf: ELF section #9 has inconsistent alignment addr=8 != d=4 in src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o
Error: failed to link 'src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o': Invalid argument (22)
Now it's slightly easier to figure out what is wrong with an ELF file.
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231208215100.435876-1-slyich@gmail.com
In libbpf, when determining whether we need to load vmlinux btf, we're
currently (among other things) checking whether there is any struct_ops
program present in the object. This works for most realistic struct_ops
maps, as a struct_ops map is of course typically composed of one or more
struct_ops programs. However, that technically need not be the case. A
struct_ops interface could be defined which allows a map to be specified
which one or more non-prog fields, and which provides default behavior
if no struct_ops progs is actually provided otherwise. For sched_ext,
for example, you technically only need to specify the name of the
scheduler in the struct_ops map, with the core scheduler logic providing
default behavior if no prog is actually specified.
If we were to define and try to load such a struct_ops map, we would
crash in libbpf when initializing it as obj->btf_vmlinux will be NULL:
Reading symbols from minimal...
(gdb) r
Starting program: minimal_example
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
0x000055555558308c in btf__type_cnt (btf=0x0) at btf.c:612
612 return btf->start_id + btf->nr_types;
(gdb) bt
type_name=0x5555555d99e3 "sched_ext_ops", kind=4) at btf.c:914
kind=4) at btf.c:942
type=0x7fffffffe558, type_id=0x7fffffffe548, ...
data_member=0x7fffffffe568) at libbpf.c:948
kern_btf=0x0) at libbpf.c:1017
at libbpf.c:8059
So as to account for such bare-bones struct_ops maps, let's update
obj_needs_vmlinux_btf() to also iterate over an obj's maps and check
whether any of them are struct_ops maps.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20231208061704.400463-1-void@manifault.com
Allow user to specify token_fd for bpf_btf_load() API that wraps
kernel's BPF_BTF_LOAD command. This allows loading BTF from unprivileged
process as long as it has BPF token allowing BPF_BTF_LOAD command, which
can be created and delegated by privileged process.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-15-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We need to get offsets for static variables in following changes,
so making elf_resolve_syms_offsets to take st_type value as argument
and passing it to elf_sym_iter_new.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20231125193130.834322-2-jolsa@kernel.org
This adds bpf_program__attach_netkit() API to libbpf. Overall it is very
similar to tcx. The API looks as following:
LIBBPF_API struct bpf_link *
bpf_program__attach_netkit(const struct bpf_program *prog, int ifindex,
const struct bpf_netkit_opts *opts);
The struct bpf_netkit_opts is done in similar way as struct bpf_tcx_opts
for supporting bpf_mprog control parameters. The attach location for the
primary and peer device is derived from the program section "netkit/primary"
and "netkit/peer", respectively.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231024214904.29825-4-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Fix too eager assumption that SHT_GNU_verdef ELF section is going to be
present whenever binary has SHT_GNU_versym section. It seems like either
SHT_GNU_verdef or SHT_GNU_verneed can be used, so failing on missing
SHT_GNU_verdef actually breaks use cases in production.
One specific reported issue, which was used to manually test this fix,
was trying to attach to `readline` function in BASH binary.
Fixes: bb7fa09399 ("libbpf: Support symbol versioning for uprobe")
Reported-by: Liam Wisehart <liamwisehart@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Manu Bretelle <chantr4@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Link: https://lore.kernel.org/bpf/20231016182840.4033346-1-andrii@kernel.org
Golang symbols in ELF files are different from C/C++
which contains special characters like '*', '(' and ')'.
With generics, things get more complicated, there are
symbols like:
github.com/cilium/ebpf/internal.(*Deque[go.shape.interface { Format(fmt.State, int32); TypeName() string;github.com/cilium/ebpf/btf.copy() github.com/cilium/ebpf/btf.Type}]).Grow
Matching such symbols using `%m[^\n]` in sscanf, this
excludes newline which typically does not appear in ELF
symbols. This should work in most use-cases and also
work for unicode letters in identifiers. If newline do
show up in ELF symbols, users can still attach to such
symbol by specifying bpf_uprobe_opts::func_name.
A working example can be found at this repo ([0]).
[0]: https://github.com/chenhengqi/libbpf-go-symbols
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230929155954.92448-1-hengqi.chen@gmail.com
Add ring__avail_data_size for querying the currently available data in
the ringbuffer, similar to the BPF_RB_AVAIL_DATA flag in
bpf_ringbuf_query. This is racy during ongoing operations but is still
useful for overall information on how a ringbuffer is behaving.
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230925215045.2375758-8-martin.kelly@crowdstrike.com
Switch rb->rings to be an array of pointers instead of a contiguous
block. This allows for each ring pointer to be stable after
ring_buffer__add is called, which allows us to expose struct ring * to
the user without gotchas. Without this change, the realloc in
ring_buffer__add could invalidate a struct ring *, making it unsafe to
give to the user.
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230925215045.2375758-3-martin.kelly@crowdstrike.com
Refactor the cleanup code in ring_buffer__add to use a unified err_out
label. This reduces code duplication, as well as plugging a potential
leak if mmap_sz != (__u64)(size_t)mmap_sz (currently this would miss
unmapping tmp because ringbuf_unmap_ring isn't called).
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230925215045.2375758-2-martin.kelly@crowdstrike.com
In current implementation, we assume that symbol found in .dynsym section
would have a version suffix and use it to compare with symbol user supplied.
According to the spec ([0]), this assumption is incorrect, the version info
of dynamic symbols are stored in .gnu.version and .gnu.version_d sections
of ELF objects. For example:
$ nm -D /lib/x86_64-linux-gnu/libc.so.6 | grep rwlock_wrlock
000000000009b1a0 T __pthread_rwlock_wrlock@GLIBC_2.2.5
000000000009b1a0 T pthread_rwlock_wrlock@@GLIBC_2.34
000000000009b1a0 T pthread_rwlock_wrlock@GLIBC_2.2.5
$ readelf -W --dyn-syms /lib/x86_64-linux-gnu/libc.so.6 | grep rwlock_wrlock
706: 000000000009b1a0 878 FUNC GLOBAL DEFAULT 15 __pthread_rwlock_wrlock@GLIBC_2.2.5
2568: 000000000009b1a0 878 FUNC GLOBAL DEFAULT 15 pthread_rwlock_wrlock@@GLIBC_2.34
2571: 000000000009b1a0 878 FUNC GLOBAL DEFAULT 15 pthread_rwlock_wrlock@GLIBC_2.2.5
In this case, specify pthread_rwlock_wrlock@@GLIBC_2.34 or
pthread_rwlock_wrlock@GLIBC_2.2.5 in bpf_uprobe_opts::func_name won't work.
Because the qualified name does NOT match `pthread_rwlock_wrlock` (without
version suffix) in .dynsym sections.
This commit implements the symbol versioning for dynsym and allows user to
specify symbol in the following forms:
- func
- func@LIB_VERSION
- func@@LIB_VERSION
In case of symbol conflicts, error out and users should resolve it by
specifying a qualified name.
[0]: https://refspecs.linuxfoundation.org/LSB_5.0.0/LSB-Core-generic/LSB-Core-generic/symversion.html
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230918024813.237475-3-hengqi.chen@gmail.com
Dynamic symbols in shared library may have the same name, for example:
$ nm -D /lib/x86_64-linux-gnu/libc.so.6 | grep rwlock_wrlock
000000000009b1a0 T __pthread_rwlock_wrlock@GLIBC_2.2.5
000000000009b1a0 T pthread_rwlock_wrlock@@GLIBC_2.34
000000000009b1a0 T pthread_rwlock_wrlock@GLIBC_2.2.5
$ readelf -W --dyn-syms /lib/x86_64-linux-gnu/libc.so.6 | grep rwlock_wrlock
706: 000000000009b1a0 878 FUNC GLOBAL DEFAULT 15 __pthread_rwlock_wrlock@GLIBC_2.2.5
2568: 000000000009b1a0 878 FUNC GLOBAL DEFAULT 15 pthread_rwlock_wrlock@@GLIBC_2.34
2571: 000000000009b1a0 878 FUNC GLOBAL DEFAULT 15 pthread_rwlock_wrlock@GLIBC_2.2.5
Currently, users can't attach a uprobe to pthread_rwlock_wrlock because
there are two symbols named pthread_rwlock_wrlock and both are global
bind. And libbpf considers it as a conflict.
Since both of them are at the same offset we could accept one of them
harmlessly. Note that we already does this in elf_resolve_syms_offsets.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230918024813.237475-2-hengqi.chen@gmail.com
Add support to libbpf to append exception callbacks when loading a
program. The exception callback is found by discovering the declaration
tag 'exception_callback:<value>' and finding the callback in the value
of the tag.
The process is done in two steps. First, for each main program, the
bpf_object__sanitize_and_load_btf function finds and marks its
corresponding exception callback as defined by the declaration tag on
it. Second, bpf_object__reloc_code is modified to append the indicated
exception callback at the end of the instruction iteration (since
exception callback will never be appended in that loop, as it is not
directly referenced).
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230912233214.1518551-16-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Refactor bpf_object__append_subprog_code out of bpf_object__reloc_code
to be able to reuse it to append subprog related code for the exception
callback to the main program.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230912233214.1518551-15-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extracting btf_int_encoding() is only meaningful for BTF_KIND_INT, so we
need to check that first before inferring signedness.
Closes: https://github.com/libbpf/libbpf/issues/704
Reported-by: Lorenz Bauer <lmb@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230824000016.2658017-2-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Andrey Grafin