Most TCP-level socket options get an integer from user space, and
set the corresponding field under the msk-level socket lock.
Reduce the code duplication moving such operations in the common code.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for such socket option storing the user-space provided
value in a new msk field, and using such data to implement the
_mptcp_stream_memory_free() helper, similar to the TCP one.
To avoid adding more indirect calls in the fast path, open-code
a variant of sk_stream_memory_free() in mptcp_sendmsg() and add
direct calls to the mptcp stream memory free helper where possible.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/464
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp_get_int_option() helper is needless open-coded in a
couple of places, replace the duplicate code with the helper
call.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following MPTCP socket fields:
- can_ack
- fully_established
- rcv_data_fin
- snd_data_fin_enable
- rcv_fastclose
- use_64bit_ack
are accessed without any lock, add the appropriate annotation.
The schema is safe as each field can change its value at most
once in the whole mptcp socket life cycle.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support for IP_BIND_ADDRESS_NO_PORT sockopt was introduced in [1].
Recently [2] allowed its value to be accessed without locking the
socket.
Support for (newer) IP_LOCAL_PORT_RANGE sockopt was introduced in [3].
In the same series a selftest was added in [4]. This selftest also
covers the IP_BIND_ADDRESS_NO_PORT sockopt.
This patch enables getsockopt()/setsockopt() on MPTCP sockets for these
socket options, syncing set values to subflows in sync_socket_options().
Ephemeral port range is synced to subflows, enabling NAT usecase
described in [3].
[1] commit 90c337da15 ("inet: add IP_BIND_ADDRESS_NO_PORT to overcome
bind(0) limitations")
[2] commit ca571e2eb7 ("inet: move inet->bind_address_no_port to
inet->inet_flags")
[3] commit 91d0b78c51 ("inet: Add IP_LOCAL_PORT_RANGE socket option")
[4] commit ae5439658c ("selftests/net: Cover the IP_LOCAL_PORT_RANGE
socket option")
Signed-off-by: Maxim Galaganov <max@internet.ru>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Next patch extends this function so that it's not specific to
IP_TRANSPARENT. Change function name to mptcp_setsockopt_sol_ip_set().
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Maxim Galaganov <max@internet.ru>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the initial subflow has been removed, we cannot know without checking
other counters, e.g. ss -ti <filter> | grep -c tcp-ulp-mptcp or
getsockopt(SOL_MPTCP, MPTCP_FULL_INFO, ...) (or others except MPTCP_INFO
of course) and then check mptcp_subflow_data->num_subflows to get the
total amount of subflows.
This patch adds a new counter mptcpi_subflows_total in mptcpi_flags to
store the total amount of subflows, including the initial one. A new
helper __mptcp_has_initial_subflow() is added to check whether the
initial subflow has been removed or not. With this helper, we can then
compute the total amount of subflows from mptcp_info by doing something
like:
mptcpi_subflows_total = mptcpi_subflows +
__mptcp_has_initial_subflow(msk).
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/428
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-1-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use __mptcp_check_fallback() helper defined in net/mptcp/protocol.h,
instead of open-coding it in both __mptcp_do_fallback() and
mptcp_diag_fill_info().
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-5-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP protocol account for the data enqueued on all the subflows
to the main socket send buffer, while the send buffer auto-tuning
algorithm set the main socket send buffer size as the max size among
the subflows.
That causes bad performances when at least one subflow is sndbuf
limited, e.g. due to very high latency, as the MPTCP scheduler can't
even fill such buffer.
Change the send-buffer auto-tuning algorithm to compute the main socket
send buffer size as the sum of all the subflows buffer size.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-9-9dc60939d371@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Any latency related tuning taking action at the subflow level does
not really affect the user-space, as only the main MPTCP socket is
relevant.
Anyway any limiting setting may foul the MPTCP scheduler, not being
able to fully use the subflow-level cwin, leading to very poor b/w
usage.
Enforce notsent_lowat to be a no-op on every subflow.
Note that TCP_NOTSENT_LOWAT is currently not supported, and properly
dealing with that will require more invasive changes.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-8-9dc60939d371@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the socket option synchronization for active subflows
at subflow creation time. This allows removing the now unused
unlocked variant of such helper.
While at that, clean-up a bit the mptcp_subflow_create_socket()
errors path.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-7-9dc60939d371@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP protocol allow setting sk_rcvlowat, but the value there
is currently ignored.
Additionally, the default subflows sk_rcvlowat basically disables per
subflow delayed ack: the MPTCP protocol move the incoming data from the
subflows into the msk socket as soon as the TCP stacks invokes the subflow
data_ready callback. Later, when __tcp_ack_snd_check() takes action,
the subflow-level copied_seq matches rcv_nxt, and that mandate for an
immediate ack.
Let the mptcp receive path be aware of such threshold, explicitly tracking
the amount of data available to be ready and checking vs sk_rcvlowat in
mptcp_poll() and before waking-up readers.
Additionally implement the set_rcvlowat() callback, to properly handle
the rcvbuf auto-tuning on sk_rcvlowat changes.
Finally to properly handle delayed ack, force the subflow level threshold
to 0 and instead explicitly ask for an immediate ack when the msk level th
is not reached.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-5-9dc60939d371@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some reads of inet->tos are racy.
Add needed READ_ONCE() annotations and convert IP_TOS option lockless.
v2: missing changes in include/net/route.h (David Ahern)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a followup of 8bf43be799 ("net: annotate data-races
around sk->sk_priority").
sk->sk_priority can be read and written without holding the socket lock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IP_TRANSPARENT socket option can now be set/read
without locking the socket.
v2: removed unused issk variable in mptcp_setsockopt_sol_ip_set_transparent()
v4: rebased after commit 3f326a821b ("mptcp: change the mpc check helper to return a sk")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
IP_FREEBIND socket option can now be set/read
without locking the socket.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous patch the __mptcp_nmpc_socket helper is used
only to ensure that the MPTCP socket is a suitable status - that
is, the mptcp capable handshake is not started yet.
Change the return value to the relevant subflow sock, to finally
remove the last references to first subflow socket in the MPTCP stack.
As a bonus, we can get rid of a few local variables in different
functions.
No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp sockopt infrastructure unneedly uses the first subflow
socket struct in a few spots. We are going to remove such field
soon, so use directly the first subflow sock instead.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk->sk_mark is often read while another thread could change the value.
Fixes: 4a19ec5800 ("[NET]: Introducing socket mark socket option.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some user-space applications want to monitor the subflows utilization.
Dumping the per subflow tcp_info is not enough, as the PM could close
and re-create the subflows under-the-hood, fooling the accounting.
Even checking the src/dst addresses used by each subflow could not
be enough, because new subflows could re-use the same address/port of
the just closed one.
This patch introduces a new socket option, allow dumping all the relevant
information all-at-once (everything, everywhere...), in a consistent
manner.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/388
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently there are no data transfer counters accounting for all
the subflows used by a given MPTCP socket. The user-space can compute
such figures aggregating the subflow info, but that is inaccurate
if any subflow is closed before the MPTCP socket itself.
Add the new counters in the MPTCP socket itself and expose them
via the existing diag and sockopt. While touching mptcp_diag_fill_info(),
acquire the relevant locks before fetching the msk data, to ensure
better data consistency
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/385
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement SCM_PIDFD, a new type of CMSG type analogical to SCM_CREDENTIALS,
but it contains pidfd instead of plain pid, which allows programmers not
to care about PID reuse problem.
We mask SO_PASSPIDFD feature if CONFIG_UNIX is not builtin because
it depends on a pidfd_prepare() API which is not exported to the kernel
modules.
Idea comes from UAPI kernel group:
https://uapi-group.org/kernel-features/
Big thanks to Christian Brauner and Lennart Poettering for productive
discussions about this.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Luca Boccassi <bluca@debian.org>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Tested-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the long run this will simplify the mptcp code and will
allow for more consistent behavior. Move the first subflow
allocation out of the sock->init ops into the __mptcp_nmpc_socket()
helper.
Since the first subflow creation can now happen after the first
setsockopt() we additionally need to invoke mptcp_sockopt_sync()
on it.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only the in-kernel PM uses the number of address and subflow limits
allowed per connection.
It then makes more sense not to display such info when other PMs are
used not to confuse the userspace by showing limits not being used.
While at it, we can get rid of the "val" variable and add indentations
instead.
It would have been good to have done this modification directly in
commit 4d25247d3a ("mptcp: bypass in-kernel PM restrictions for non-kernel PMs")
but as we change a bit the behaviour, it is fine not to backport it to
stable.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to call the __mptcp_nmpc_socket(), and later subflow socket
access under the msk socket lock, or e.g. a racing connect() could
change the socket status under the hood, with unexpected results.
Fixes: 54635bd047 ("mptcp: add TCP_FASTOPEN_CONNECT socket option")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Usually, attributes are propagated to subflows as well.
Here, if subflows are created by other ways than the MPTCP path-manager,
it is important to make sure they are in v6 if it is asked by the
userspace.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The helper msk_owned_by_me() is defined in protocol.h, so use it instead
of sock_owned_by_me().
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When 'err' is 0, it looks clearer to return '0' instead of the variable
called 'err'.
The behaviour is then not modified, just a clearer code.
By doing this, we can also avoid false positive smatch warnings like
this one:
net/mptcp/pm_netlink.c:1169 mptcp_pm_parse_pm_addr_attr() warn: missing error code? 'err'
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The goal of this socket option is to set different keys per listener,
see commit 1fba70e5b6 ("tcp: socket option to set TCP fast open key")
for more details about this socket option.
The only thing to do here with MPTCP is to relay the request to the
first subflow like it is already done for the other TCP_FASTOPEN* socket
options.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TCP_FASTOPEN socket option is one way for the application to tell
the kernel TFO support has to be enabled for the listener socket.
The only thing to do here with MPTCP is to relay the request to the
first subflow like it is already done for the other TCP_FASTOPEN* socket
options.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use '(struct sock *)msk' to get 'sk' from 'msk' in a more direct way
instead of using '&msk->sk.icsk_inet.sk'.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_setsockopt_sol_tcp_defer() was doing the same thing as
mptcp_setsockopt_first_sf_only() except for the returned code in case of
error.
Ignoring the error is needed to mimic how TCP_DEFER_ACCEPT is handled
when used with "plain" TCP sockets.
The specific function for TCP_DEFER_ACCEPT can be replaced by the new
mptcp_setsockopt_first_sf_only() helper and errors can be ignored to
stay compatible with TCP. A bit of cleanup.
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The goal of this socket option is to configure MPTCP + TFO without
cookie per socket.
It was already possible to enable TFO without a cookie per netns by
setting net.ipv4.tcp_fastopen sysctl knob to the right value. Per route
was also supported by setting 'fastopen_no_cookie' option. This patch
adds a per socket support like it is possible to do with TCP thanks to
TCP_FASTOPEN_NO_COOKIE socket option.
The only thing to do here is to relay the request to the first subflow
like it is already done for TCP_FASTOPEN_CONNECT.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are other socket options that need to act only on the first
subflow, e.g. all TCP_FASTOPEN* socket options.
This is similar to the getsockopt version.
In the next commit, this new mptcp_setsockopt_first_sf_only() helper is
used by other another option.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Set the option for the first subflow only. For the other subflows TFO
can't be used because a mapping would be needed to cover the data in the
SYN.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support this via passthrough to the underlying tcp listener socket.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/271
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Problem is that listener iteration would call this from atomic context
so this locking is not allowed.
One way is to drop locks before calling the helper, but afaics the lock
isn't really needed, all values are fetched via READ_ONCE().
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add setsockopt support for SO_SNDTIMEO_OLD and SO_SNDTIMEO_NEW to fix this
error reported by the mptcp bpf selftest:
(network_helpers.c:64: errno: Operation not supported) Failed to set SO_SNDTIMEO
test_mptcp:FAIL:115
All error logs:
(network_helpers.c:64: errno: Operation not supported) Failed to set SO_SNDTIMEO
test_mptcp:FAIL:115
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can simplify the join list handling leveraging the
mptcp_release_cb(): if we can acquire the msk socket
lock at mptcp_finish_join time, move the new subflow
directly into the conn_list, otherwise place it on join_list and
let the release_cb process such list.
Since pending MPJ connection are now always processed
in a timely way, we can avoid flushing the join list
every time we have to process all the current subflows.
Additionally we can now use the mptcp data lock to protect
the join_list, removing the additional spin lock.
Finally, the MPJ handshake is now always finalized under the
msk socket lock, we can drop the additional synchronization
between mptcp_finish_join() and mptcp_close().
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP_ULP setsockopt cannot be used for mptcp because its already
used internally to plumb subflow (tcp) sockets to the mptcp layer.
syzbot managed to trigger a crash for mptcp connections that are
in fallback mode:
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
CPU: 1 PID: 1083 Comm: syz-executor.3 Not tainted 5.16.0-rc2-syzkaller #0
RIP: 0010:tls_build_proto net/tls/tls_main.c:776 [inline]
[..]
__tcp_set_ulp net/ipv4/tcp_ulp.c:139 [inline]
tcp_set_ulp+0x428/0x4c0 net/ipv4/tcp_ulp.c:160
do_tcp_setsockopt+0x455/0x37c0 net/ipv4/tcp.c:3391
mptcp_setsockopt+0x1b47/0x2400 net/mptcp/sockopt.c:638
Remove support for TCP_ULP setsockopt.
Fixes: d9e4c12918 ("mptcp: only admit explicitly supported sockopt")
Reported-by: syzbot+1fd9b69cde42967d1add@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
First, add cork and nodelay fields to the mptcp_sock structure
so they can be used in sync_socket_options(), and fill them on setsockopt
while holding the msk socket lock.
Then, on setsockopt set proper tcp_sk(ssk)->nonagle values for subflows
by calling __tcp_sock_set_cork() or __tcp_sock_set_nodelay() on the ssk
while holding the ssk socket lock.
tcp_push_pending_frames() will be invoked on the ssk if a cork was cleared
or nodelay was set. Also set MPTCP_PUSH_PENDING bit by calling
mptcp_check_and_set_pending(). This will lead to __mptcp_push_pending()
being called inside mptcp_release_cb() with new tcp_sk(ssk)->nonagle.
Also add getsockopt support for TCP_CORK and TCP_NODELAY.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Maxim Galaganov <max@internet.ru>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
earlier patch added IP_TOS setsockopt support, this allows to get
the value set by earlier setsockopt.
Extends mptcp_put_int_option to handle u8 input/output by
adding required cast.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support the TCP_INQ setsockopt.
This is a boolean that tells recvmsg path to include the remaining
in-sequence bytes in the cmsg data.
v2: do not use CB(skb)->offset, increment map_seq instead (Paolo Abeni)
v3: adjust CB(skb)->map_seq when taking skb from ofo queue (Paolo Abeni)
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/224
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These options also need to be set before bind, so do the sync of msk to
new ssk socket a bit earlier.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni