Core & protocols
----------------
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps etc.)
lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core
instead of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length
and budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global config
variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug
of ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for
use on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code
--------------------------------------------
- Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
VM_SPARSE kind and vm_area_[un]map_pages (used by bpf_arena).
- Rework selftest harness to enable the use of the full range of
ksft exit code (pass, fail, skip, xfail, xpass).
Netfilter
---------
- Allow userspace to define a table that is exclusively owned by a daemon
(via netlink socket aliveness) without auto-removing this table when
the userspace program exits. Such table gets marked as orphaned and
a restarting management daemon can re-attach/regain ownership.
- Speed up element insertions to nftables' concatenated-ranges set type.
Compact a few related data structures.
BPF
---
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between BPF
program and user space where structures inside the arena can have
pointers to other areas of the arena, and pointers work seamlessly
for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the verifier
and the program. The verifier allows the program to loop assuming it's
behaving well, but reserves the right to terminate it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF objects.
Wireless
--------
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API
----------
- Major overhaul of the Energy Efficient Ethernet internals to support
new link modes (2.5GE, 5GE), share more code between drivers
(especially those using phylib), and encourage more uniform behavior.
Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc
----
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions,
and packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message encapsulation
or "Netlink polymorphism", where interpretation of nested attributes
depends on link type, classifier type or some other "class type".
Drivers
-------
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic
on CAN BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO) support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oY52
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
The cls_,sch_,act_ modules may be loaded lazily during network
configuration but without user's awareness and control.
Switch the lazy loading from canonical module names to a module alias.
This allows finer control over lazy loading, the precedent from
commit 7f78e03513 ("fs: Limit sys_mount to only request filesystem
modules.") explains it already:
Using aliases means user space can control the policy of which
filesystem^W net/sched modules are auto-loaded by editing
/etc/modprobe.d/*.conf with blacklist and alias directives.
Allowing simple, safe, well understood work-arounds to known
problematic software.
By default, nothing changes. However, if a specific module is
blacklisted (its canonical name), it won't be modprobe'd when requested
under its alias (i.e. kernel auto-loading). It would appear as if the
given module was unknown.
The module can still be loaded under its canonical name, which is an
explicit (privileged) user action.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240201130943.19536-4-mkoutny@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Step 5/10 of the namespace unification of CPU mitigations related Kconfig options.
[ mingo: Converted a few more uses in comments/messages as well. ]
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ariel Miculas <amiculas@cisco.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231121160740.1249350-6-leitao@debian.org
Implement conditional netlink notifications for Qdiscs and classes,
which were missing in the initial patches that targeted tc filters and
actions. Notifications will only be built after passing a check for
'rtnl_notify_needed()'.
For both Qdiscs and classes 'get' operations now call a dedicated
notification function as it was not possible to distinguish between
'create' and 'get' before. This distinction is necessary because 'get'
always send a notification.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231229132642.1489088-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit makes tc blocks track which ports have been added to them.
And, with that, we'll be able to use this new information to send
packets to the block's ports. Which will be done in the patch #3 of this
series.
Suggested-by: Jiri Pirko <jiri@nvidia.com>
Co-developed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When replacing an existing root qdisc, with one that is of the same kind, the
request boils down to essentially a parameterization change i.e not one that
requires allocation and grafting of a new qdisc. syzbot was able to create a
scenario which resulted in a taprio qdisc replacing an existing taprio qdisc
with a combination of NLM_F_CREATE, NLM_F_REPLACE and NLM_F_EXCL leading to
create and graft scenario.
The fix ensures that only when the qdisc kinds are different that we should
allow a create and graft, otherwise it goes into the "change" codepath.
While at it, fix the code and comments to improve readability.
While syzbot was able to create the issue, it did not zone on the root cause.
Analysis from Vladimir Oltean <vladimir.oltean@nxp.com> helped narrow it down.
v1->V2 changes:
- remove "inline" function definition (Vladmir)
- remove extrenous braces in branches (Vladmir)
- change inline function names (Pedro)
- Run tdc tests (Victor)
v2->v3 changes:
- dont break else/if (Simon)
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+a3618a167af2021433cd@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/20230816225759.g25x76kmgzya2gei@skbuf/T/
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mini_Qdisc_pair::p_miniq is a double pointer to mini_Qdisc, initialized
in ingress_init() to point to net_device::miniq_ingress. ingress Qdiscs
access this per-net_device pointer in mini_qdisc_pair_swap(). Similar
for clsact Qdiscs and miniq_egress.
Unfortunately, after introducing RTNL-unlocked RTM_{NEW,DEL,GET}TFILTER
requests (thanks Hillf Danton for the hint), when replacing ingress or
clsact Qdiscs, for example, the old Qdisc ("@old") could access the same
miniq_{in,e}gress pointer(s) concurrently with the new Qdisc ("@new"),
causing race conditions [1] including a use-after-free bug in
mini_qdisc_pair_swap() reported by syzbot:
BUG: KASAN: slab-use-after-free in mini_qdisc_pair_swap+0x1c2/0x1f0 net/sched/sch_generic.c:1573
Write of size 8 at addr ffff888045b31308 by task syz-executor690/14901
...
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:319
print_report mm/kasan/report.c:430 [inline]
kasan_report+0x11c/0x130 mm/kasan/report.c:536
mini_qdisc_pair_swap+0x1c2/0x1f0 net/sched/sch_generic.c:1573
tcf_chain_head_change_item net/sched/cls_api.c:495 [inline]
tcf_chain0_head_change.isra.0+0xb9/0x120 net/sched/cls_api.c:509
tcf_chain_tp_insert net/sched/cls_api.c:1826 [inline]
tcf_chain_tp_insert_unique net/sched/cls_api.c:1875 [inline]
tc_new_tfilter+0x1de6/0x2290 net/sched/cls_api.c:2266
...
@old and @new should not affect each other. In other words, @old should
never modify miniq_{in,e}gress after @new, and @new should not update
@old's RCU state.
Fixing without changing sch_api.c turned out to be difficult (please
refer to Closes: for discussions). Instead, make sure @new's first call
always happen after @old's last call (in {ingress,clsact}_destroy()) has
finished:
In qdisc_graft(), return -EBUSY if @old has any ongoing filter requests,
and call qdisc_destroy() for @old before grafting @new.
Introduce qdisc_refcount_dec_if_one() as the counterpart of
qdisc_refcount_inc_nz() used for filter requests. Introduce a
non-static version of qdisc_destroy() that does a TCQ_F_BUILTIN check,
just like qdisc_put() etc.
Depends on patch "net/sched: Refactor qdisc_graft() for ingress and
clsact Qdiscs".
[1] To illustrate, the syzkaller reproducer adds ingress Qdiscs under
TC_H_ROOT (no longer possible after commit c7cfbd1150 ("net/sched:
sch_ingress: Only create under TC_H_INGRESS")) on eth0 that has 8
transmission queues:
Thread 1 creates ingress Qdisc A (containing mini Qdisc a1 and a2),
then adds a flower filter X to A.
Thread 2 creates another ingress Qdisc B (containing mini Qdisc b1 and
b2) to replace A, then adds a flower filter Y to B.
Thread 1 A's refcnt Thread 2
RTM_NEWQDISC (A, RTNL-locked)
qdisc_create(A) 1
qdisc_graft(A) 9
RTM_NEWTFILTER (X, RTNL-unlocked)
__tcf_qdisc_find(A) 10
tcf_chain0_head_change(A)
mini_qdisc_pair_swap(A) (1st)
|
| RTM_NEWQDISC (B, RTNL-locked)
RCU sync 2 qdisc_graft(B)
| 1 notify_and_destroy(A)
|
tcf_block_release(A) 0 RTM_NEWTFILTER (Y, RTNL-unlocked)
qdisc_destroy(A) tcf_chain0_head_change(B)
tcf_chain0_head_change_cb_del(A) mini_qdisc_pair_swap(B) (2nd)
mini_qdisc_pair_swap(A) (3rd) |
... ...
Here, B calls mini_qdisc_pair_swap(), pointing eth0->miniq_ingress to
its mini Qdisc, b1. Then, A calls mini_qdisc_pair_swap() again during
ingress_destroy(), setting eth0->miniq_ingress to NULL, so ingress
packets on eth0 will not find filter Y in sch_handle_ingress().
This is just one of the possible consequences of concurrently accessing
miniq_{in,e}gress pointers.
Fixes: 7a096d579e ("net: sched: ingress: set 'unlocked' flag for Qdisc ops")
Fixes: 87f373921c ("net: sched: ingress: set 'unlocked' flag for clsact Qdisc ops")
Reported-by: syzbot+b53a9c0d1ea4ad62da8b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/0000000000006cf87705f79acf1a@google.com/
Cc: Hillf Danton <hdanton@sina.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Grafting ingress and clsact Qdiscs does not need a for-loop in
qdisc_graft(). Refactor it. No functional changes intended.
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch fixes the following sparse warning:
net/sched/sch_api.c:2305:1: sparse: warning: symbol 'tc_skip_wrapper' was not declared. Should it be static?
No functional change intended.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Acked-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When use the following command to test:
1)ip link add bond0 type bond
2)ip link set bond0 up
3)tc qdisc add dev bond0 root handle ffff: mq
4)tc qdisc replace dev bond0 parent ffff:fff1 handle ffff: mq
The kernel reports NULL pointer dereference issue. The stack information
is as follows:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Internal error: Oops: 0000000096000006 [#1] SMP
Modules linked in:
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mq_attach+0x44/0xa0
lr : qdisc_graft+0x20c/0x5cc
sp : ffff80000e2236a0
x29: ffff80000e2236a0 x28: ffff0000c0e59d80 x27: ffff0000c0be19c0
x26: ffff0000cae3e800 x25: 0000000000000010 x24: 00000000fffffff1
x23: 0000000000000000 x22: ffff0000cae3e800 x21: ffff0000c9df4000
x20: ffff0000c9df4000 x19: 0000000000000000 x18: ffff80000a934000
x17: ffff8000f5b56000 x16: ffff80000bb08000 x15: 0000000000000000
x14: 0000000000000000 x13: 6b6b6b6b6b6b6b6b x12: 6b6b6b6b00000001
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff0000c0be0730 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008
x5 : ffff0000cae3e864 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000001 x1 : ffff8000090bc23c x0 : 0000000000000000
Call trace:
mq_attach+0x44/0xa0
qdisc_graft+0x20c/0x5cc
tc_modify_qdisc+0x1c4/0x664
rtnetlink_rcv_msg+0x354/0x440
netlink_rcv_skb+0x64/0x144
rtnetlink_rcv+0x28/0x34
netlink_unicast+0x1e8/0x2a4
netlink_sendmsg+0x308/0x4a0
sock_sendmsg+0x64/0xac
____sys_sendmsg+0x29c/0x358
___sys_sendmsg+0x90/0xd0
__sys_sendmsg+0x7c/0xd0
__arm64_sys_sendmsg+0x2c/0x38
invoke_syscall+0x54/0x114
el0_svc_common.constprop.1+0x90/0x174
do_el0_svc+0x3c/0xb0
el0_svc+0x24/0xec
el0t_64_sync_handler+0x90/0xb4
el0t_64_sync+0x174/0x178
This is because when mq is added for the first time, qdiscs in mq is set
to NULL in mq_attach(). Therefore, when replacing mq after adding mq, we
need to initialize qdiscs in the mq before continuing to graft. Otherwise,
it will couse NULL pointer dereference issue in mq_attach(). And the same
issue will occur in the attach functions of mqprio, taprio and htb.
ffff:fff1 means that the repalce qdisc is ingress. Ingress does not allow
any qdisc to be attached. Therefore, ffff:fff1 is incorrectly used, and
the command should be dropped.
Fixes: 6ec1c69a8f ("net_sched: add classful multiqueue dummy scheduler")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Tested-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230527093747.3583502-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, after creating an ingress (or clsact) Qdisc and grafting it
under TC_H_INGRESS (TC_H_CLSACT), it is possible to graft it again under
e.g. a TBF Qdisc:
$ ip link add ifb0 type ifb
$ tc qdisc add dev ifb0 handle 1: root tbf rate 20kbit buffer 1600 limit 3000
$ tc qdisc add dev ifb0 clsact
$ tc qdisc link dev ifb0 handle ffff: parent 1:1
$ tc qdisc show dev ifb0
qdisc tbf 1: root refcnt 2 rate 20Kbit burst 1600b lat 560.0ms
qdisc clsact ffff: parent ffff:fff1 refcnt 2
^^^^^^^^
clsact's refcount has increased: it is now grafted under both
TC_H_CLSACT and 1:1.
ingress and clsact Qdiscs should only be used under TC_H_INGRESS
(TC_H_CLSACT). Prohibit regrafting them.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: 1f211a1b92 ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently it is possible to add e.g. an HTB Qdisc under ffff:fff1
(TC_H_INGRESS, TC_H_CLSACT):
$ ip link add name ifb0 type ifb
$ tc qdisc add dev ifb0 parent ffff:fff1 htb
$ tc qdisc add dev ifb0 clsact
Error: Exclusivity flag on, cannot modify.
$ drgn
...
>>> ifb0 = netdev_get_by_name(prog, "ifb0")
>>> qdisc = ifb0.ingress_queue.qdisc_sleeping
>>> print(qdisc.ops.id.string_().decode())
htb
>>> qdisc.flags.value_() # TCQ_F_INGRESS
2
Only allow ingress and clsact Qdiscs under ffff:fff1. Return -EINVAL
for everything else. Make TCQ_F_INGRESS a static flag of ingress and
clsact Qdiscs.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: 1f211a1b92 ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If TCA_STAB attribute is malformed, qdisc_get_stab() returns
an error, and we end up calling ops->destroy() while ops->init()
has not been called yet.
While we are at it, call qdisc_put_stab() after ops->destroy().
Fixes: 1f62879e36 ("net/sched: make stab available before ops->init() call")
Reported-by: syzbot+d44d88f1d11e6ca8576b@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some qdiscs like taprio turn out to be actually pretty reliant on a well
configured stab, to not underestimate the skb transmission time (by
properly accounting for L1 overhead).
In a future change, taprio will need the stab, if configured by the
user, to be available at ops->init() time. It will become even more
important in upcoming work, when the overhead will be used for the
queueMaxSDU calculation that is passed to an offloading driver.
However, rcu_assign_pointer(sch->stab, stab) is called right after
ops->init(), making it unavailable, and I don't really see a good reason
for that.
Move it earlier, which nicely seems to simplify the error handling path
as well.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
We will report extack message if there is an error via netlink_ack(). But
if the rule is not to be exclusively executed by the hardware, extack is not
passed along and offloading failures don't get logged.
In commit 81c7288b17 ("sched: cls: enable verbose logging") Marcelo
made cls could log verbose info for offloading failures, which helps
improving Open vSwitch debuggability when using flower offloading.
It would also be helpful if userspace monitor tools, like "tc monitor",
could log this kind of message, as it doesn't require vswitchd log level
adjusment. Let's add a new tc attributes to report the extack message so
the monitor program could receive the failures. e.g.
# tc monitor
added chain dev enp3s0f1np1 parent ffff: chain 0
added filter dev enp3s0f1np1 ingress protocol all pref 49152 flower chain 0 handle 0x1
ct_state +trk+new
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1
Warning: mlx5_core: matching on ct_state +new isn't supported.
In this patch I only report the extack message on add/del operations.
It doesn't look like we need to report the extack message on get/dump
operations.
Note this message not only reporte to multicast groups, it could also
be reported unicast, which may affect the current usersapce tool's behaivor.
Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230113034353.2766735-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While experimenting with applying noqueue to a classful queue discipline,
we discovered a NULL pointer dereference in the __dev_queue_xmit()
path that generates a kernel OOPS:
# dev=enp0s5
# tc qdisc replace dev $dev root handle 1: htb default 1
# tc class add dev $dev parent 1: classid 1:1 htb rate 10mbit
# tc qdisc add dev $dev parent 1:1 handle 10: noqueue
# ping -I $dev -w 1 -c 1 1.1.1.1
[ 2.172856] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 2.173217] #PF: supervisor instruction fetch in kernel mode
...
[ 2.178451] Call Trace:
[ 2.178577] <TASK>
[ 2.178686] htb_enqueue+0x1c8/0x370
[ 2.178880] dev_qdisc_enqueue+0x15/0x90
[ 2.179093] __dev_queue_xmit+0x798/0xd00
[ 2.179305] ? _raw_write_lock_bh+0xe/0x30
[ 2.179522] ? __local_bh_enable_ip+0x32/0x70
[ 2.179759] ? ___neigh_create+0x610/0x840
[ 2.179968] ? eth_header+0x21/0xc0
[ 2.180144] ip_finish_output2+0x15e/0x4f0
[ 2.180348] ? dst_output+0x30/0x30
[ 2.180525] ip_push_pending_frames+0x9d/0xb0
[ 2.180739] raw_sendmsg+0x601/0xcb0
[ 2.180916] ? _raw_spin_trylock+0xe/0x50
[ 2.181112] ? _raw_spin_unlock_irqrestore+0x16/0x30
[ 2.181354] ? get_page_from_freelist+0xcd6/0xdf0
[ 2.181594] ? sock_sendmsg+0x56/0x60
[ 2.181781] sock_sendmsg+0x56/0x60
[ 2.181958] __sys_sendto+0xf7/0x160
[ 2.182139] ? handle_mm_fault+0x6e/0x1d0
[ 2.182366] ? do_user_addr_fault+0x1e1/0x660
[ 2.182627] __x64_sys_sendto+0x1b/0x30
[ 2.182881] do_syscall_64+0x38/0x90
[ 2.183085] entry_SYSCALL_64_after_hwframe+0x63/0xcd
...
[ 2.187402] </TASK>
Previously in commit d66d6c3152 ("net: sched: register noqueue
qdisc"), NULL was set for the noqueue discipline on noqueue init
so that __dev_queue_xmit() falls through for the noqueue case. This
also sets a bypass of the enqueue NULL check in the
register_qdisc() function for the struct noqueue_disc_ops.
Classful queue disciplines make it past the NULL check in
__dev_queue_xmit() because the discipline is set to htb (in this case),
and then in the call to __dev_xmit_skb(), it calls into htb_enqueue()
which grabs a leaf node for a class and then calls qdisc_enqueue() by
passing in a queue discipline which assumes ->enqueue() is not set to NULL.
Fix this by not allowing classes to be assigned to the noqueue
discipline. Linux TC Notes states that classes cannot be set to
the noqueue discipline. [1] Let's enforce that here.
Links:
1. https://linux-tc-notes.sourceforge.net/tc/doc/sch_noqueue.txt
Fixes: d66d6c3152 ("net: sched: register noqueue qdisc")
Cc: stable@vger.kernel.org
Signed-off-by: Frederick Lawler <fred@cloudflare.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20230109163906.706000-1-fred@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On kernels using retpoline as a spectrev2 mitigation,
optimize actions and filters that are compiled as built-ins into a direct call.
On subsequent patches we expose the classifiers and actions functions
and wire up the wrapper into tc.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All bind_class callbacks are directly returned when n arg is empty.
Therefore, bind_class is invoked only when n arg is not empty.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When adding optional new features to Qdisc offloads, existing drivers
must reject the new configuration until they are coded up to act on it.
Since modifying all drivers in lockstep with the changes in the Qdisc
can create problems of its own, it would be nice if there existed an
automatic opt-in mechanism for offloading optional features.
Jakub proposes that we multiplex one more kind of call through
ndo_setup_tc(): one where the driver populates a Qdisc-specific
capability structure.
First user will be taprio in further changes. Here we are introducing
the definitions for the base functionality.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20220923163310.3192733-3-vladimir.oltean@nxp.com/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rtnetlink_rcv_msg function, the permission for all user operations
is checked except the GET operation, which is the same as the checking
in qdisc. Therefore, remove the user rights check in qdisc.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Message-Id: <20220819041854.83372-1-shaozhengchao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Netdev reference helpers have a dev_ prefix for historic
reasons. Renaming the old helpers would be too much churn
but we can rename the tracking ones which are relatively
recent and should be the default for new code.
Rename:
dev_hold_track() -> netdev_hold()
dev_put_track() -> netdev_put()
dev_replace_track() -> netdev_ref_replace()
Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When adding a tc rule with a qdisc kind that is not supported or not
compiled into the kernel, the kernel emits the following error: "Error:
Specified qdisc not found.". Found via tdc testing when ETS qdisc was not
compiled in and it was not obvious right away what the message meant
without looking at the kernel code.
Change the error message to be more explicit and say the qdisc kind is
unknown.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The attach callback of struct Qdisc_ops is used by only a few qdiscs:
mq, mqprio and htb. qdisc_graft() contains the following logic
(pseudocode):
if (!qdisc->ops->attach) {
if (ingress)
do ingress stuff;
else
do egress stuff;
}
if (!ingress) {
...
if (qdisc->ops->attach)
qdisc->ops->attach(qdisc);
} else {
...
}
As we see, the attach callback is not called if the qdisc is being
attached to ingress (TC_H_INGRESS). That wasn't a problem for mq and
mqprio, since they contain a check that they are attached to TC_H_ROOT,
and they can't be attached to TC_H_INGRESS anyway.
However, the commit cited below added the attach callback to htb. It is
needed for the hardware offload, but in the non-offload mode it
simulates the "do egress stuff" part of the pseudocode above. The
problem is that when htb is attached to ingress, neither "do ingress
stuff" nor attach() is called. It results in an inconsistency, and the
following message is printed to dmesg:
unregister_netdevice: waiting for lo to become free. Usage count = 2
This commit addresses the issue by running "do ingress stuff" in the
ingress flow even in the attach callback is present, which is fine,
because attach isn't going to be called afterwards.
The bug was found by syzbot and reported by Eric.
Fixes: d03b195b5a ("sch_htb: Hierarchical QoS hardware offload")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qdisc_create() error path needs to use dev_put_track()
because qdisc_alloc() allocated the tracker.
Fixes: 606509f27f ("net/sched: add net device refcount tracker to struct Qdisc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220104170439.3790052-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Qdisc::running sequence counter has two uses:
1. Reliably reading qdisc's tc statistics while the qdisc is running
(a seqcount read/retry loop at gnet_stats_add_basic()).
2. As a flag, indicating whether the qdisc in question is running
(without any retry loops).
For the first usage, the Qdisc::running sequence counter write section,
qdisc_run_begin() => qdisc_run_end(), covers a much wider area than what
is actually needed: the raw qdisc's bstats update. A u64_stats sync
point was thus introduced (in previous commits) inside the bstats
structure itself. A local u64_stats write section is then started and
stopped for the bstats updates.
Use that u64_stats sync point mechanism for the bstats read/retry loop
at gnet_stats_add_basic().
For the second qdisc->running usage, a __QDISC_STATE_RUNNING bit flag,
accessed with atomic bitops, is sufficient. Using a bit flag instead of
a sequence counter at qdisc_run_begin/end() and qdisc_is_running() leads
to the SMP barriers implicitly added through raw_read_seqcount() and
write_seqcount_begin/end() getting removed. All call sites have been
surveyed though, and no required ordering was identified.
Now that the qdisc->running sequence counter is no longer used, remove
it.
Note, using u64_stats implies no sequence counter protection for 64-bit
architectures. This can lead to the qdisc tc statistics "packets" vs.
"bytes" values getting out of sync on rare occasions. The individual
values will still be valid.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The only factor differentiating per-CPU bstats data type (struct
gnet_stats_basic_cpu) from the packed non-per-CPU one (struct
gnet_stats_basic_packed) was a u64_stats sync point inside the former.
The two data types are now equivalent: earlier commits added a u64_stats
sync point to the latter.
Combine both data types into "struct gnet_stats_basic_sync". This
eliminates redundancy and simplifies the bstats read/write APIs.
Use u64_stats_t for bstats "packets" and "bytes" data types. On 64-bit
architectures, u64_stats sync points do not use sequence counter
protection.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make use of the struct_size() and flex_array_size() helpers instead of
an open-coded version, in order to avoid any potential type mistakes
or integer overflows that, in the worse scenario, could lead to heap
overflows.
Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20210928193107.GA262595@embeddedor
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We observed below report when playing with netlink sock:
UBSAN: shift-out-of-bounds in net/sched/sch_api.c:580:10
shift exponent 249 is too large for 32-bit type
CPU: 0 PID: 685 Comm: a.out Not tainted
Call Trace:
dump_stack_lvl+0x8d/0xcf
ubsan_epilogue+0xa/0x4e
__ubsan_handle_shift_out_of_bounds+0x161/0x182
__qdisc_calculate_pkt_len+0xf0/0x190
__dev_queue_xmit+0x2ed/0x15b0
it seems like kernel won't check the stab log value passing from
user, and will use the insane value later to calculate pkt_len.
This patch just add a check on the size/cell_log to avoid insane
calculation.
Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It has been deal with the 'if (err' statement in rtnetlink_send()
and rtnl_unicast(). so remove unnecessary if statement.
v2: use the raw name rtnetlink_send().
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a follow up of commit ea32746953 ("net: sched: avoid
duplicates in qdisc dump") which has fixed the issue only for the qdisc
dump.
The duplicate printing also occurs when dumping the classes via
tc class show dev eth0
Fixes: 59cc1f61f0 ("net: sched: convert qdisc linked list to hashtable")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a following commit, sch_htb will start using extack in the delete
class operation to pass hardware errors in offload mode. This commit
prepares for that by adding the extack parameter to this callback and
converting usage of the existing qdiscs.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Functions tfilter_notify_chain() and tcf_get_next_proto() are always called
with rtnl lock held in current implementation. Moreover, attempting to call
them without rtnl lock would cause a warning down the call chain in
function __tcf_get_next_proto() that requires the lock to be held by
callers. Remove the 'rtnl_held' argument in order to simplify the code and
make rtnl lock requirement explicit.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20201127151205.23492-1-vladbu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Calls to nla_strlcpy are now replaced by calls to nla_strscpy which is the new
name of this function.
Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nla_strlcpy now returns -E2BIG if src was truncated when written to dst.
It also returns this error value if dstsize is 0 or higher than INT_MAX.
For example, if src is "foo\0" and dst is 3 bytes long, the result will be:
1. "foG" after memcpy (G means garbage).
2. "fo\0" after memset.
3. -E2BIG is returned because src was not completely written into dst.
The callers of nla_strlcpy were modified to take into account this modification.
Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
parent cannot be NULL here since its in the else part
of the if (parent == NULL) condition. Remove the extra
check on parent pointer.
Signed-off-by: Gaurav Singh <gaurav1086@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qdisc_watchdog_schedule_range_ns() can use the newly added slack
and avoid rearming the hrtimer a bit earlier than the current
value. This patch has no effect if delta_ns parameter
is zero.
Note that this means the max slack is potentially doubled.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet