Commit cbffaf7aa0 ("can: flexcan: Always use last mailbox for TX")
introduced a loop letting i run up to (including) ARRAY_SIZE(regs->mb)
and in the body accessed regs->mb[i] which is an out-of-bounds array
access that then resulted in an access to an reserved register area.
Later this was changed by commit 0517961ccd ("can: flexcan: Add
provision for variable payload size") to iterate a bit differently but
still runs one iteration too much resulting to call
flexcan_get_mb(priv, priv->mb_count)
which results in a WARN_ON and then a NULL pointer exception. This
only affects devices compatible with "fsl,p1010-flexcan",
"fsl,imx53-flexcan", "fsl,imx35-flexcan", "fsl,imx25-flexcan",
"fsl,imx28-flexcan", so newer i.MX SoCs are not affected.
Fixes: cbffaf7aa0 ("can: flexcan: Always use last mailbox for TX")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: linux-stable <stable@vger.kernel.org> # >= 4.20
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Kyungtae Kim detected a potential integer overflow in bcm_[rx|tx]_setup()
when the conversion into ktime multiplies the given value with NSEC_PER_USEC
(1000).
Reference: https://marc.info/?l=linux-can&m=154732118819828&w=2
Add a check for the given tv_usec, so that the value stays below one second.
Additionally limit the tv_sec value to a reasonable value for CAN related
use-cases of 400 days and ensure all values to be positive.
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-stable <stable@vger.kernel.org> # >= 2.6.26
Tested-by: Kyungtae Kim <kt0755@gmail.com>
Acked-by: Andre Naujoks <nautsch2@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch revert commit 7da11ba5c5
("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb")
After introduction of this change we encountered following new error
message on various i.MX plattforms (flexcan):
| flexcan 53fc8000.can can0: __can_get_echo_skb: BUG! Trying to echo non
| existing skb: can_priv::echo_skb[0]
The introduction of the message was a mistake because
priv->echo_skb[idx] = NULL is a perfectly valid in following case: If
CAN_RAW_LOOPBACK is disabled (setsockopt) in applications, the pkt_type
of the tx skb's given to can_put_echo_skb is set to PACKET_LOOPBACK. In
this case can_put_echo_skb will not set priv->echo_skb[idx]. It is
therefore kept NULL.
As additional argument for revert: The order of check and usage of idx
was changed. idx is used to access an array element before checking it's
boundaries.
Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Fixes: 7da11ba5c5 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Adopt nvram module to reduce code duplication. This means CONFIG_NVRAM
becomes available to PPC64 builds. Previously it was only available to
PPC32 builds because it depended on CONFIG_GENERIC_NVRAM.
The IOC_NVRAM_GET_OFFSET ioctl as implemented on PPC64 validates the
offset returned by pmac_get_partition(). Do the same in the nvram module.
Note that the old PPC32 generic_nvram module lacked this test.
So when CONFIG_PPC32 && CONFIG_PPC_PMAC, the IOC_NVRAM_GET_OFFSET ioctl
would have returned 0 (always). But when CONFIG_PPC64 && CONFIG_PPC_PMAC,
the IOC_NVRAM_GET_OFFSET ioctl would have returned -1 (which is -EPERM)
when the requested partition was not found.
With this patch, the result is now -EINVAL on both PPC32 and PPC64 when
the requested PowerMac NVRAM partition is not found. This is a userspace-
visible change, in the non-existent partition case, which would be in
an error path for an IOC_NVRAM_GET_OFFSET ioctl syscall.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Switch PPC32 kernels from the generic_nvram module to the nvram module.
Also fix a theoretical bug where CHRP omits the chrp_nvram_init() call
when CONFIG_NVRAM_MODULE=m.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch addresses inconsistencies in Mac framebuffer drivers and their
use of Kconfig symbols relating to NVRAM, so PPC64 can use CONFIG_NVRAM.
The defined(CONFIG_NVRAM) condition is replaced with the weaker
IS_REACHABLE(CONFIG_NVRAM) condition, like atari_scsi.
Macintosh framebuffer drivers use default settings for color mode and
video mode that are found in NVRAM. On PCI Macs, MacOS stores display
settings in the Name Registry (NR) partition in NVRAM*. On NuBus Macs,
there is no NR partition and MacOS stores display mode settings in PRAM**.
Early-model Macs are the ones most likely to benefit from these settings,
since they are more likely to have a fixed-frequency monitor connected to
the built-in framebuffer device. Moreover, a single NV_CMODE value and
a single NV_VMODE value provide for only one display.
The NV_CMODE and NV_VMODE constants are apparently offsets into the NR
partition for Old World machines. This also suggests that these defaults
are not useful on later models. The NR partition seems to be optional on
New World machines. CONFIG_NVRAM cannot be enabled on PPC64 at present.
It is safe to say that NVRAM support in PowerMac fbdev drivers is only
applicable to CONFIG_PPC32 so make this condition explicit. This means
matroxfb driver won't crash on PPC64 when CONFIG_NVRAM becomes available
there.
For imsttfb, add the missing CONFIG_NVRAM test to prevent a build failure,
since PPC64 does not implement nvram_read_byte(). Also add a missing
machine_is(powermac) check. Change the inconsistent dependency on
CONFIG_PPC and the matching #ifdef tests to CONFIG_PPC_PMAC.
For valkyriefb, to improve clarity and consistency with the other PowerMac
fbdev drivers, test for CONFIG_PPC_PMAC instead of !CONFIG_MAC. Remove a
bogus comment regarding PRAM.
* See GetPreferredConfiguration and SavePreferredConfiguration in
"Designing PCI Cards and Drivers for Power Macintosh Computers".
** See SetDefaultMode and GetDefaultMode in "Designing Cards and Drivers
for the Macintosh Family".
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the powerpc-specific ioctls to the nvram module. This allows the nvram
module to replace the generic_nvram module.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the nvram_size() function to those PowerPC platforms that don't already
have one: CHRP and PowerMac. This means that the ppc_md.nvram_size()
function can be called by nvram_get_size().
Since we are addressing CHRP inconsistencies here, rename chrp_nvram_read
and chrp_nvram_write, which break the naming convention used across
powerpc platforms for NVRAM accessor functions.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A multi-platform kernel binary has to decide at run-time how to dispatch
the arch_nvram_ops calls. Add a platform-independent arch_nvram_ops
struct for this, to replace the atari-specific one.
Enable CONFIG_HAVE_ARCH_NVRAM_OPS for Macs.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Certain Cuda transfers have to be ended by the driver. According
to Apple's open source Cuda driver, as found in mkLinux and XNU, this
applies to any "open ended request such as PRAM read". This fixes an
infinite polling loop in cuda_pram_read_byte().
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PMU-based m68k Macs pre-date PowerMac-style NVRAM. Use the appropriate
PMU commands. Also implement the missing XPRAM accessors for VIA-based
Macs.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is intended to improve code style and not affect code behaviour.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adopt the existing *_read_byte and *_write_byte naming convention.
Rename via_pram_readbyte and via_pram_writebyte to avoid confusion.
Adjust calling conventions of mac_pram_* functions to match the
struct nvram_ops methods.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Atari RTC NVRAM uses a checksum so implement the remaining arch_nvram_ops
methods for the set_checksum and initialize ioctls. Enable
CONFIG_HAVE_ARCH_NVRAM_OPS.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the RTC "CMOS" NVRAM functions so that they can be used as
arch_nvram_ops methods. Checksumming logic is moved from the misc device
operations to the nvram read/write operations. This makes the misc device
implementation more generic.
This preserves the locking mechanism such that "read if checksum valid"
and "write and update checksum" remain atomic operations.
Some platforms implement byte-range read/write methods which are similar
to file_operations struct methods. Other platforms provide only
byte-at-a-time methods. The former are more efficient but may be
unavailable so fall back on the latter methods when necessary.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The drivers/char/nvram.c module has previously supported only RTC "CMOS"
NVRAM, for which it provides appropriate checksum ioctls. Make these
ioctls optional so the module can be re-used with other kinds of NVRAM.
The ops struct methods that implement the ioctls now return error
codes so that a multi-platform kernel binary can do the right thing when
running on hardware without a suitable NVRAM.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NVRAMs on different platforms and architectures have different attributes
and access methods. E.g. some platforms have byte-at-a-time accessor
functions while others have byte-range accessor functions. Some have
checksum functionality while others do not. By calling ops struct methods
via the common wrapper functions, the nvram module and other drivers can
make use of the available NVRAM functionality in a portable way.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the nvram_read_byte() and nvram_write_byte() declarations in
powerpc/include/asm/nvram.h and use the cross-platform static functions
in linux/nvram.h instead.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
By implementing an arch_nvram_ops struct, a platform can re-use the
drivers/char/nvram.c module without needing any arch-specific code
in that module. Atari does so here.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace nvram_* functions with static functions in nvram.h. These will
become wrappers for struct nvram_ops method calls.
This patch effectively disables existing NVRAM functionality so as to
allow the rest of the series to be bisected without build failures.
That functionality is gradually re-implemented in subsequent patches.
Replace the sole validate-checksum-and-read-byte sequence with a call to
nvram_read() which will gain the same semantics in subsequent patches.
Remove unused exports.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Also give functions more sensible names: nvram_misc_* for misc device ops,
nvram_proc_* for proc file ops and nvram_module_* for init and exit
functions. This prevents name collisions with nvram.h helper functions
and improves readability.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the m68k-specific code out of the driver to make the driver generic.
I've used 'SPDX-License-Identifier: GPL-2.0+' for the new file because the
old file is covered by MODULE_LICENSE("GPL").
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On powerpc, setting CONFIG_NVRAM=n builds a kernel with no NVRAM support.
Setting CONFIG_NVRAM=m enables the /dev/nvram misc device module without
enabling NVRAM support in drivers. Setting CONFIG_NVRAM=y enables the
misc device (built-in) and also enables NVRAM support in drivers.
m68k shares the valkyriefb driver with powerpc, and since that driver uses
NVRAM, it is affected by CONFIG_ATARI_SCSI, because of the use of
"select NVRAM". We can avoid the "select" here, but drivers still have
to interpret the CONFIG_NVRAM symbol consistently regardless of platform.
In this patch and the subsequent fbdev driver patch, the convention is
adopted across all relevant platforms whereby NVRAM functionality gets
enabled in a given device driver when the nvram misc device is built-in
or when both drivers are modules.
Acked-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Although TMDS clock is required for HDMI to properly function,
nobody called clk_prepare_enable(). This fixes reference counting
issues and makes sure clock is running when it needs to be running.
Due to TDMS clock being parent clock for DDC clock, TDMS clock
was turned on/off for each EDID probe, causing spurious failures
for certain HDMI/DVI screens.
Fixes: 9c5681011a ("drm/sun4i: Add HDMI support")
Signed-off-by: Priit Laes <priit.laes@paf.com>
[Maxime: Moved the TMDS clock enable earlier]
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122073232.7240-1-plaes@plaes.org
The geni set/get_mctrl() functions currently do nothing unless
hardware flow control is enabled. Remove this arbitrary limitation.
Suggested-by: Johan Hovold <johan@kernel.org>
Fixes: 8a8a66a1a1 ("tty: serial: qcom_geni_serial: Add support for flow control")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SPDX license identifier and the boiler plate text are
contradicting. Only the SPDX license identifier is needed. The
other one is removed.
Fixes: 86958dcc5a ("mmc: dw_mmc-bluefield: Add driver extension")
Cc: stable@vger.kernel.org
Reviewed-by: David Woods <dwoods@mellanox.com>
Signed-off-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Fix some oversights in the XArray porcelain API:
- support for m68k's two-byte aligned pointers
- reserving entries using xa_insert()
- missing xa_insert_bh() and xa_insert_irq() functions
- simplify using xa_for_each()
- use lockdep correctly
- a few other minor fixes and improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAlxGjXAUHHdpbGx5QGlu
ZnJhZGVhZC5vcmcACgkQDpNsjXcpgj5L4Qf8DQaaA9aDsZ66CGaxExfxiEMM2SEl
Ns02XTgVWvXUPI2zHU6oZGBgWOY2jysy688WJZH7FlFJVzHytbZ26ZG6sabVD271
WQJnjSeZwNnCF0ZJP/mbr6SKkZHOaAxWRgeXJQFPvke58gMxj9w7a2qU5OEBcbS2
nUCk5LzqQHveH0UYQJJGvKca/p8f2h0Y28+BG5YRWo1ivEDAf6LaD2ItTOv5Jf/4
lfaW48h/ObBNMaor+0fn8Po5TtP9R8vgBGDt5XRjiTy0yXEq62HwTCHjOydqywTA
pyEN8zZMtOwDjz9eEm+WPR3bLcOmLK+i0+oRFpM7tNl+iq/i0DCjxpJ+eQ==
=56qs
-----END PGP SIGNATURE-----
Merge tag 'xarray-5.0-rc3' of git://git.infradead.org/users/willy/linux-dax
Pull XArray fixes from Matthew Wilcox:
"Fix some oversights in the XArray porcelain API:
- support for m68k's two-byte aligned pointers
- reserving entries using xa_insert()
- missing xa_insert_bh() and xa_insert_irq() functions
- simplify using xa_for_each()
- use lockdep correctly
- a few other minor fixes and improvements"
* tag 'xarray-5.0-rc3' of git://git.infradead.org/users/willy/linux-dax:
XArray: Fix an arithmetic error in xa_is_err
XArray tests: Check mark 2 gets squashed
XArray: Fix typo in comment
XArray: Honour reserved entries in xa_insert
XArray: Permit storing 2-byte-aligned pointers
XArray: Change xa_for_each iterator
XArray: Turn xa_init_flags into a static inline
XArray tests: Add RCU locking
gfxclk for OD setting is limited to 1980M for non-acg
ASICs of Vega10
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
One fix only for now:
- Fix probe deferral in iommu/of code (broke with recent changes
to iommu_ops->add_device invocation)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=+93K
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fix from Joerg Roedel:
"One fix only for now: Fix probe deferral in iommu/of code (broke with
recent changes to iommu_ops->add_device invocation)"
* tag 'iommu-fixes-v5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/of: Fix probe-deferral
- Perf support for raw events
- boot log printing: return stack, action points
- fix memset to avoid prefetchw bleeding past end of buffer
- do_page_fault fix for mmap_sem held while returning to userspace
- other miscll fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QMUe
-----END PGP SIGNATURE-----
Merge tag 'arc-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC architecture updates from Vineet Gupta:
- Perf support for raw events
- boot log printing: return stack, action points
- fix memset to avoid prefetchw bleeding past end of buffer
- do_page_fault fix for mmap_sem held while returning to userspace
- other misc fixes
* tag 'arc-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARCv2: lib: memeset: fix doing prefetchw outside of buffer
ARC: mm: do_page_fault fixes#1: relinquish mmap_sem if signal arrives while handle_mm_fault
ARC: show_regs: lockdep: re-enable preemption
ARC: show_regs: lockdep: avoid page allocator...
ARC: perf: avoid kernel killing where it is possible
ARC: perf: move HW events mapping to separate function
ARC: perf: introduce Kernel PMU events support
ARC: perf: trivial code cleanup
ARC: perf: map generic branches to correct hardware condition
ARC: adjust memblock_reserve of kernel memory
arc: remove redundant kernel-space generic-y
ARC: fix __ffs return value to avoid build warnings
ARC: boot log: print Action point details
ARCv2: boot log: BPU return stack depth
The _DSM function number validation only happens to succeed when the
generic Linux command number translation corresponds with a
DSM-family-specific function number. This breaks NVDIMM-N
implementations that correctly implement _LSR, _LSW, and _LSI, but do
not happen to publish support for DSM function numbers 4, 5, and 6.
Recall that the support for _LS{I,R,W} family of methods results in the
DIMM being marked as supporting those command numbers at
acpi_nfit_register_dimms() time. The DSM function mask is only used for
ND_CMD_CALL support of non-NVDIMM_FAMILY_INTEL devices.
Fixes: 31eca76ba2 ("nfit, libnvdimm: limited/whitelisted dimm command...")
Cc: <stable@vger.kernel.org>
Link: https://github.com/pmem/ndctl/issues/78
Reported-by: Sujith Pandel <sujith_pandel@dell.com>
Tested-by: Sujith Pandel <sujith_pandel@dell.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for using function number 0 as an error value, prevent it
from being considered a valid function value by acpi_nfit_ctl().
Cc: <stable@vger.kernel.org>
Cc: stuart hayes <stuart.w.hayes@gmail.com>
Fixes: e02fb7264d ("nfit: add Microsoft NVDIMM DSM command set...")
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The following warning:
ACPI0012:00: security event setup failed: -19
...is meant to capture exceptional failures of sysfs_get_dirent(),
however it will also fail in the common case when security support is
disabled. A few issues:
1/ A dev_warn() report for a common case is too chatty
2/ The setup of this notifier is generic, no need for it to be driven
from the nfit driver, it can exist completely in the core.
3/ If it fails for any reason besides security support being disabled,
that's fatal and should abort DIMM activation. Userspace may hang if
it never gets overwrite notifications.
4/ The dirent needs to be released.
Move the call to the core 'dimm' driver, make it conditional on security
support being active, make it fatal for the exceptional case, add the
missing sysfs_put() at device disable time.
Fixes: 7d988097c5 ("...Add security DSM overwrite support")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The override status function needs to be updated to use the proper
request parameter in order to get the security state.
Fixes: 3c13e2ac74 ("...Add test support for Intel nvdimm security DSMs")
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Some tty line disciplines do not have a receive buf callback, so
properly check for that before calling it. If they do not have this
callback, just eat the character quietly, as we can't fail this call.
Reported-by: Jann Horn <jannh@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The risk of redundant IO accounting was not taken into consideration
when commit 18a25da843 ("dm: ensure bio submission follows a
depth-first tree walk") introduced IO splitting in terms of recursion
via generic_make_request().
Fix this by subtracting the split bio's payload from the IO stats that
were already accounted for by start_io_acct() upon dm_make_request()
entry. This repeat oscillation of the IO accounting, up then down,
isn't ideal but refactoring DM core's IO splitting to pre-split bios
_before_ they are accounted turned out to be an excessive amount of
change that will need a full development cycle to refine and verify.
Before this fix:
/dev/mapper/stripe_dev is a 4-way stripe using a 32k chunksize, so
bios are split on 32k boundaries.
# fio --name=16M --filename=/dev/mapper/stripe_dev --rw=write --bs=64k --size=16M \
--iodepth=1 --ioengine=libaio --direct=1 --refill_buffers
with debugging added:
[103898.310264] device-mapper: core: start_io_acct: dm-2 WRITE bio->bi_iter.bi_sector=0 len=128
[103898.318704] device-mapper: core: __split_and_process_bio: recursing for following split bio:
[103898.329136] device-mapper: core: start_io_acct: dm-2 WRITE bio->bi_iter.bi_sector=64 len=64
...
16M written yet 136M (278528 * 512b) accounted:
# cat /sys/block/dm-2/stat | awk '{ print $7 }'
278528
After this fix:
16M written and 16M (32768 * 512b) accounted:
# cat /sys/block/dm-2/stat | awk '{ print $7 }'
32768
Fixes: 18a25da843 ("dm: ensure bio submission follows a depth-first tree walk")
Cc: stable@vger.kernel.org # 4.16+
Reported-by: Bryan Gurney <bgurney@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
DM's clone_bio() now benefits from using bio_trim() by fixing the fact
that clone_bio() wasn't clearing BIO_SEG_VALID like bio_trim() does;
which triggers blk_recount_segments() via bio_phys_segments().
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Support speaker and mic mute LEDs on HP ProBook 470 G5.
BugLink: https://bugs.launchpad.net/bugs/1811254
Signed-off-by: Anthony Wong <anthony.wong@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Precise and non-ambiguous license information is important. The recently
added quota.c file has a SPDX license identifier, which is nice, but
at the same time it has a contradictionary license boiler plate text.
SPDX-License-Identifier: GPL-2.0
versus
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
Oh well.
As the other ceph related files are licensed under the GPL v2 only, it's
assumed that the SPDX id is correct and the boiler plate was randomly
copied into that patch.
Remove the boiler plate as it is wrong and even if correct it is redundant.
Fixes: fb18a57568 ("ceph: quota: add initial infrastructure to support cephfs quotas")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Luis Henriques <lhenriques@suse.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: "Yan, Zheng" <zyan@redhat.com>
Cc: Sage Weil <sage@redhat.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: ceph-devel@vger.kernel.org
Acked-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
con_fault() can transition the connection into STANDBY right after
ceph_con_keepalive() clears STANDBY in clear_standby():
libceph user thread ceph-msgr worker
ceph_con_keepalive()
mutex_lock(&con->mutex)
clear_standby(con)
mutex_unlock(&con->mutex)
mutex_lock(&con->mutex)
con_fault()
...
if KEEPALIVE_PENDING isn't set
set state to STANDBY
...
mutex_unlock(&con->mutex)
set KEEPALIVE_PENDING
set WRITE_PENDING
This triggers warnings in clear_standby() when either ceph_con_send()
or ceph_con_keepalive() get to clearing STANDBY next time.
I don't see a reason to condition queue_con() call on the previous
value of KEEPALIVE_PENDING, so move the setting of KEEPALIVE_PENDING
into the critical section -- unlike WRITE_PENDING, KEEPALIVE_PENDING
could have been a non-atomic flag.
Reported-by: syzbot+acdeb633f6211ccdf886@syzkaller.appspotmail.com
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Myungho Jung <mhjungk@gmail.com>
snap realm and corresponding inode have pointers to each other.
The two pointer should get clear at the same time. Otherwise,
snap realm's pointer may reference freed inode.
Cc: stable@vger.kernel.org # 4.17+
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Because wake_q_add() can imply an immediate wakeup (cmpxchg failure
case), we must not rely on the wakeup being delayed. However, commit:
e38513905e ("locking/rwsem: Rework zeroing reader waiter->task")
relies on exactly that behaviour in that the wakeup must not happen
until after we clear waiter->task.
[ peterz: Added changelog. ]
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: e38513905e ("locking/rwsem: Rework zeroing reader waiter->task")
Link: https://lkml.kernel.org/r/1543495830-2644-1-git-send-email-xieyongji@baidu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We must not rely on wake_q_add() to delay the wakeup; in particular
commit:
1d0dcb3ad9 ("futex: Implement lockless wakeups")
moved wake_q_add() before smp_store_release(&q->lock_ptr, NULL), which
could result in futex_wait() waking before observing ->lock_ptr ==
NULL and going back to sleep again.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 1d0dcb3ad9 ("futex: Implement lockless wakeups")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Notable cmpxchg() does not provide ordering when it fails, however
wake_q_add() requires ordering in this specific case too. Without this
it would be possible for the concurrent wakeup to not observe our
prior state.
Andrea Parri provided:
C wake_up_q-wake_q_add
{
int next = 0;
int y = 0;
}
P0(int *next, int *y)
{
int r0;
/* in wake_up_q() */
WRITE_ONCE(*next, 1); /* node->next = NULL */
smp_mb(); /* implied by wake_up_process() */
r0 = READ_ONCE(*y);
}
P1(int *next, int *y)
{
int r1;
/* in wake_q_add() */
WRITE_ONCE(*y, 1); /* wake_cond = true */
smp_mb__before_atomic();
r1 = cmpxchg_relaxed(next, 1, 2);
}
exists (0:r0=0 /\ 1:r1=0)
This "exists" clause cannot be satisfied according to the LKMM:
Test wake_up_q-wake_q_add Allowed
States 3
0:r0=0; 1:r1=1;
0:r0=1; 1:r1=0;
0:r0=1; 1:r1=1;
No
Witnesses
Positive: 0 Negative: 3
Condition exists (0:r0=0 /\ 1:r1=0)
Observation wake_up_q-wake_q_add Never 0 3
Reported-by: Yongji Xie <elohimes@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
