Commit graph

358 commits

Author SHA1 Message Date
Linus Torvalds
6eb7365db6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Overwrite pin config on intel DG45ID board.
  intelhdmi - dont power off HDA link
  ALSA: hrtimer - Fix lock-up
  ALSA: intelhdmi - add channel mapping for typical configurations
  ALSA: intelhdmi - channel mapping applies to Pin
  ALSA: intelhdmi - accept DisplayPort pin
  ALSA: hda - show HBR(High Bit Rate) pin cap in procfs
  ALSA: hda - Fix LED GPIO setup for HP laptops with IDT codecs
  ASoC: Fix build of OMAP sound drivers
  ALSA: opti93x: fix irq releasing if the irq cannot be allocated
2009-12-12 11:40:50 -08:00
Krzysztof Helt
5f60e49608 ALSA: opti93x: fix irq releasing if the irq cannot be allocated
Use the chip->irq to check if the irq should be released so the irq is not released
if it has not been allocated.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-10 11:39:48 +01:00
Linus Torvalds
78f1ae193d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: ice1724 - aureon - modify WM8770 Master & DAC volume
  ALSA: hda/realtek: quirk for D945GCLF2 mainboard
  ALSA: hda - Terradici HDA controllers does not support 64-bit mode
  ALSA: document: Add direct git link to grub hda-analyzer
  ALSA: radio/sound/miro: fix build, cleanup depends/selects
  ALSA: hda - Generalize EAPD inversion check in patch_analog.c
  ASoC: Wrong variable returned on error
  ALSA: snd-usb-us122l: add product IDs of US-122MKII and US-144MKII
  ALSA: hda - Exclude unusable ADCs for ALC88x
  ALSA: hda - Add missing Line-Out and PCM switches as slave
  ALSA: hda - iMac 9,1 sound patch.
  ALSA: opti93x: set MC indirect registers base from PnP data
2009-12-09 19:52:13 -08:00
Linus Torvalds
4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00
Krzysztof Helt
e6960e194a ALSA: opti93x: set MC indirect registers base from PnP data
The PnP data on the OPTI931 and OPTI933 contains io port
range for the MC indirect registers. Use the PnP range
instead of hardwired value 0xE0E.

Also, request region of MC indirect registers so it is
marked as used to other drivers (this was missing previously).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-08 12:22:52 +01:00
Takashi Iwai
57648cd52b Merge branch 'topic/misc' into for-linus 2009-12-04 16:22:37 +01:00
André Goddard Rosa
af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Krzysztof Helt
d8ea23931c ALSA: opti9xx: remove snd_opti9xx fields
Remove snd_opti9xx fields which are indirect arguments to
the snd_opti9xx_configure(). Pass these values as function
arguments.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-02 23:56:10 +01:00
Krzysztof Helt
306ecee926 ALSA: opti-miro: add PnP detection
The PCM12 and PCM20 can be set into the ISA PnP mode. The PCM12 PnP
was sold as the PnP device.
Add code to handle detection of these cards using ISA PnP framework.

Tested on the PCM20 in PnP mode. The PCM12 PnP has the same MS Windows
INF file except for a card name displayed for user.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-30 11:26:30 +01:00
Krzysztof Helt
70a5f1187b ALSA: opti-miro: separate comon probing code
Separate common probing code in order to use it
for PnP probing.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-30 11:26:22 +01:00
Krzysztof Helt
8700055e0a ALSA: opti-miro: fix OOPS if hardware is not detected
If a hardware is not detected there is a kernel crash
due to not initialized snd_miro->aci pointer. This pointer
is initialized after detection of the opti (miro) chip.

This bug was introduced by patches to expose
ACI mikser outside the snd-miro driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-27 11:21:40 +01:00
Krzysztof Helt
9dc9120c77 ALSA: opti-miro: expose ACI mixer to outside drivers
The ACI mixer is used to control the radio FM module
installed on the Miro PCM20 sound card. Expose ACI mixer
outside the sound card driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-23 09:41:55 +01:00
Krzysztof Helt
9aeba62971 ALSA: opti-miro: make miro.h header available outside the alsa directory
Move the miro.h header to the include/sound directory. It can
be used in the Miro PCM20 radio driver (v4l).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-23 09:41:46 +01:00
Krzysztof Helt
616ad593fe ALSA: opti-miro: remove snd_card pointer from snd_miro structure
Remove the snd_card pointer from the snd_miro structure and
do some small code improvements.

Also, move Opti chipset detection before detection of the
ACI mixer, so the mci_base value is set in one place only.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-21 19:59:49 +01:00
Krzysztof Helt
4b28dca860 ALSA: cs4236: add dB scale for all volume controls
Use db scale for all volume controls according to Crystal's datasheets.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-19 11:52:47 +01:00
Takashi Iwai
67f2db24fb ALSA: opti-miro: Fix missing semicolon
To fix a build error
  sound/isa/opti9xx/miro.c:1281: error: expected ';' before '}' token

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18 08:37:59 +01:00
Krzysztof Helt
b67cad932c ALSA: opti-miro: use variables directly in the probe function
Use the fm_port and mpu_port variables directly in a probe function.
This completely eliminates a need to copy the fm_port value to
the snd_miro structure.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18 07:23:32 +01:00
Krzysztof Helt
b753e03e5e ALSA: cs4236: update control names
Update control names to be more closer to their meaning.
Change the "Mono" name to the "Beep" as this line is usually
used to forward the PC beeper signal to sound card's output.
Update names for both cs423x and wss.

Clean up cs4235 controls according to the cs4235 doc. Rename
some of the cs4235 controls to be consistent with the cs4236's
ones.

Also, delete one misnamed cs4231 register define.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18 07:23:16 +01:00
Krzysztof Helt
faa1242c59 ALSA: es18xx: code improvements
1. Set the third argument of the snd_device_new to not NULL, so there is
   no warning about bug during chip detection. The third argument is not
   used in this driver. It was changed in my previous patch.

2. Remove the fm_port and mpu_port fields from the snd_es18xx structure.
   They can be converted to function arguments.

3. Remove the dmaN_size fields from the snd_es18xx structure. These
   values are used only in pointer functions and can be easily calculated.

4. Remove the ctrl_lock spinlock which is used only in one read function
   which is called once during chip initialization. There are many
   writes to the same register and they are not protected on purpose
   (see the comment ina the snd_es18xx_config_write()).

5. Use the first part of the text5Sources string table as the text4Soruces
   table (they are the same).

6. Merge the same cases for the ES1887 and ES1888 when setting chip's caps.

7. Move the snd_es18xx_reset() to __devinit section.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-08 11:26:04 +01:00
Krzysztof Helt
d114cd84a1 ALSA: cs4236: detect chip in one pass
The cs4236 was two step detection with call to the snd_wss_free()
between two steps. The snd_wss_free() did not free a sound device
created in the snd_wss_create(). This caused an OOPS during module
removal as the same sound device was released twice. The same OOPS
happened if the cs4236 module loading failed.

Fix this by adapting the snd_cs4236_create() to correctly work with
chips less capable then cs4236. The snd_cs4236_create() behaves the
same as the snd_wss_create() if the chip is less capable than the cs4236.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-05 18:10:25 +01:00
Jaroslav Kysela
d355c82a01 ALSA: rename "PC Speaker" and "PC Beep" controls to "Beep"
To avoid confusion in control names for the standard analog PC Beep generator
using a small Internal PC Speaker, rename all related "PC Speaker" and "PC
Beep" controls to "Beep" only. This name is more universal and can be also
used on more platforms without confusion.

Introduce also "Internal Speaker" in ControlNames.txt for systems with
full-featured build-in internal speaker.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-05 09:00:18 +01:00
Krzysztof Helt
b14f5de731 ALSA: es18xx: remove snd_audiodrive structure
Remove intermediate snd_audiodrive structure between
snd_card structure and snd_es18xx. This reduces size of
source code and binary driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-30 12:46:39 +01:00
Krzysztof Helt
3c76b4d69b ALSA: es18xx: remove snd_card pointer from snd_es18xx structure
The snd_card pointer is redundant and code can be easily
changed to work without it.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-30 12:46:18 +01:00
Krzysztof Helt
633c7e92bd ALSA: wss: reuse CS4231 controls for AD1848
The C4231 control set is a superset of the AD1848 control
set so reuse the CS4231 controls definitions for the AD1848.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11 18:02:58 +02:00
Krzysztof Helt
abd134db94 ALSA: wss: convert CS4231 mixer to dB scale
Convert CS4231 mixer to dB scale after AD1848 mixer.

Also, add missing microphone boost control for the AD1848
and correct wrong bits for loopback volume on the AD1848.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-10 10:55:10 +02:00
Krzysztof Helt
6fcfa3959a ALSA: sscape: coding style fixes
Fix coding style errors in the driver.

Also, add missing argument for CMD_XXX_MIDI_VOL command.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-10 10:54:52 +02:00
Takashi Iwai
ed76f652d5 ALSA: sscape - Remove invalid __devinitdata to module parameters
Module parameters shouldn't be marked as __devinitdata since they can be
referred via sysfs even after probing.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-05 18:27:28 +02:00
Krzysztof Helt
1cb0fdebae ALSA: sscape: force AD1848 codec mode on old Soundscape
Old Soundscape cards (pre PnP) work only with AD1848 codecs.
If the CS4231 codec is installed it must be used in AD1848
compatible mode.

Also, add gameport support and remove an unused mpu field.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-05 18:21:33 +02:00
Krzysztof Helt
bcde1f8a80 ALSA: sscape: remove MIDI instances counting with limit ULONG_MAX
There is no sense to limit open MIDI connections with limit
as high as ULONG_MAX.

Also, convert more messages to use the snd_printk.

Correct few old and misleading comments as well.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-04 10:22:51 +02:00
Krzysztof Helt
acd4710091 ALSA: sscape: convert to firmware loader framework
The conversion solves the problem that firmware size was set to 64KB
while non PnP cards have 128KB firmware files.

An additional firmware initialization code has been moved from the OSS
driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-01 07:51:56 +02:00
Krzysztof Helt
f0968e3f7a ALSA: sscape: add supoort for SPEA Media FX/Reveal SC-600
Move code from the OSS sscape driver in order to support old Soundscape OEM models.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:31:36 +02:00
Takashi Iwai
9d2743f84d Merge branch 'topic/cmi8330' into for-linus
* topic/cmi8330:
  ALSA: cmi8330: Allow MPU-401-less operation
  ALSA: cmi8330: find OPL3 port automatically
  cmi8330: Add basic CMI8329 support
  ALSA: cmi8330: revert comments about AD1848 back
2009-09-10 15:32:45 +02:00
Julia Lawall
fcb2954b96 ALSA: sound/isa: convert nested spin_lock_irqsave to spin_lock
If spin_lock_irqsave is called twice in a row with the same second
argument, the interrupt state at the point of the second call overwrites
the value saved by the first call.  Indeed, the second call does not need
to save the interrupt state, so it is changed to a simple spin_lock.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression lock1,lock2;
expression flags;
@@

*spin_lock_irqsave(lock1,flags)
... when != flags
*spin_lock_irqsave(lock2,flags)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-19 14:02:29 +02:00
Ondrej Zary
72b43cf140 ALSA: cmi8330: Allow MPU-401-less operation
Adding MPU-401 support to cmi8330 driver could cause a regression (non-working
sound) on a system where there is no free IRQ for the MPU-401 device (which
is not very uncommon as this card requires two separate IRQs plus a third one
for MPU-401).

When MPU-401 PnP configuration fails (mostly because of unavailable IRQ), just
ignore MPU-401 and continue without it.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-07 18:24:53 +02:00
Ondrej Zary
0b95916723 ALSA: cmi8330: find OPL3 port automatically
My CMI8329 had OPL3 port specified in SB16 resources. But now I found out that
it was my modification of the card's PnP EEPROM a couple of years ago (can be
done using C9SETROM.EXE utility). I did it because the OPL3 port was
completely missing from PnP data. It seems to be hardwired to 0x388 on
CMI8329.

Find OPL3 port automatically by searching in WSS and SB16 resources. If not
found, assume that it's hardwired to 0x388.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-07 08:02:57 +02:00
Ondrej Zary
69eb88825a cmi8330: Add basic CMI8329 support
Add basic support for CMI8329 cards. Makes PCM and OPL3 work.
Does not break CMI8330 (tested).

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-05 11:47:24 +02:00
Ondrej Zary
74a0094cd9 ALSA: cmi8330: revert comments about AD1848 back
In ALSA 1.0.20, the comments were changed to say CMI8330 instead of AD1848.
The CMI8330 chip includes two codecs - AD1848 and SB16, so the comments were
correct and are misleading now. Revert them back.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-29 08:06:57 +02:00
Ondrej Zary
c2a30d7118 ALSA: cmi8330: fix MPU-401 PnP init copy&paste bug
Fix copy&paste bug in PnP MPU-401 initialization.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-29 08:06:10 +02:00
Takashi Iwai
4ef279205a Merge branch 'topic/seq-kconfig-cleanup' into for-linus
* topic/seq-kconfig-cleanup:
  ALSA: clean up the logic for building sequencer modules
2009-06-10 07:26:48 +02:00
Takashi Iwai
1282c824cc Merge branch 'topic/section-fix' into for-linus
* topic/section-fix:
  ALSA: Add missing __devexit_p() markers
  ALSA: powermac - Replace the rest of __init*
  ALSA: sound/ppc: update annotations of serveral functions
2009-06-10 07:26:46 +02:00
Takashi Iwai
45d60e3648 Merge branch 'topic/sc6000' into for-linus
* topic/sc6000:
  ALSA: sc6000: enable joystick port
  ALSA: sc6000: fix older card initialization
  ALSA: sc6000: add support for SC-6600 and SC-7000
2009-06-10 07:26:45 +02:00
Jean Delvare
82ced6fd28 ALSA: Add missing __devexit_p() markers
3 ISA sound drivers lack their __devexit_p() markers, which would
cause build failures when the kernel is built without hotplug support.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-04 10:52:16 +02:00
Michal Marek
0528c7494e ALSA: clean up the logic for building sequencer modules
Instead of mangling the CONFIG_* variables in the makefiles over and
over, set a few helper variables in Kconfig.

Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-29 11:49:42 +02:00
Krzysztof Helt
b0ec3a30bc ALSA: sc6000: enable joystick port
Add module parameter to enable or disable
joystick port (gameport) on the SC6600 and
later cards.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-04 09:08:22 +02:00
Takashi Iwai
2008f137e9 ALSA: Add missing SNDRV_PCM_INFO_BATCH flag to some drivers
Added SNDRV_PCM_INFO_BATCH flag to PCM info field of some drivers that
really don't give the precise pointer value.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-28 15:06:44 +02:00
Krzysztof Helt
0cfcdedadd ALSA: sc6000: fix older card initialization
The last patch to handle newer cards like SC7000
broke initialization of the SC6000. Fix this.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-24 08:12:06 +02:00
Takashi Iwai
f4723b224d Merge branch 'topic/memdup_user' into for-linus
* topic/memdup_user:
  ALSA: sound/pci: use memdup_user()
  ALSA: sound/usb: use memdup_user()
  ALSA: sound/isa: use memdup_user()
  ALSA: sound/core: use memdup_user()
2009-04-15 11:24:27 +02:00
Krzysztof Helt
c282866101 ALSA: sc6000: add support for SC-6600 and SC-7000
Add support for later cards based on CompuMedia ASC-9408 chipsets.
These cards were produced by Gallant.

This patch make the OSS aedsp16 driver redundant.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-14 13:27:31 +02:00
Li Zefan
68425adcc4 ALSA: sound/isa: use memdup_user()
Remove open-coded memdup_user().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-14 12:39:23 +02:00
Linus Torvalds
1e17d774db Merge git://git.infradead.org/~dwmw2/firmware-2.6
* git://git.infradead.org/~dwmw2/firmware-2.6:
  qla1280: Fix off-by-some error in firmware loading.
  Add README.AddingFirmware file. Basically telling people not to.
  firmware: Remove newly-added slicoss and sxg firmware images
  firmware/WHENCE: Add missing origin information for Ambassador atmsar11.fw
  ALSA: wavefront - Always use request_firmware()
  Remove fdump tool for av7110 firmware
  firmware: convert av7110 driver to request_firmware()
  Partially revert "V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card"
  Revert "fix modules_install via NFS"

Add-add conflicts in firmware/WHENCE fixed manually
2009-04-10 12:01:22 -07:00