Commit Graph

32 Commits

Author SHA1 Message Date
David Howells 245500d853 rxrpc: Rewrite the client connection manager
Rewrite the rxrpc client connection manager so that it can support multiple
connections for a given security key to a peer.  The following changes are
made:

 (1) For each open socket, the code currently maintains an rbtree with the
     connections placed into it, keyed by communications parameters.  This
     is tricky to maintain as connections can be culled from the tree or
     replaced within it.  Connections can require replacement for a number
     of reasons, e.g. their IDs span too great a range for the IDR data
     type to represent efficiently, the call ID numbers on that conn would
     overflow or the conn got aborted.

     This is changed so that there's now a connection bundle object placed
     in the tree, keyed on the same parameters.  The bundle, however, does
     not need to be replaced.

 (2) An rxrpc_bundle object can now manage the available channels for a set
     of parallel connections.  The lock that manages this is moved there
     from the rxrpc_connection struct (channel_lock).

 (3) There'a a dummy bundle for all incoming connections to share so that
     they have a channel_lock too.  It might be better to give each
     incoming connection its own bundle.  This bundle is not needed to
     manage which channels incoming calls are made on because that's the
     solely at whim of the client.

 (4) The restrictions on how many client connections are around are
     removed.  Instead, a previous patch limits the number of client calls
     that can be allocated.  Ordinarily, client connections are reaped
     after 2 minutes on the idle queue, but when more than a certain number
     of connections are in existence, the reaper starts reaping them after
     2s of idleness instead to get the numbers back down.

     It could also be made such that new call allocations are forced to
     wait until the number of outstanding connections subsides.

Signed-off-by: David Howells <dhowells@redhat.com>
2020-09-08 21:11:43 +01:00
David Howells 32f71aa497 rxrpc: Adjust /proc/net/rxrpc/calls to display call->debug_id not user_ID
The user ID value isn't actually much use - and leaks a kernel pointer or a
userspace value - so replace it with the call debug ID, which appears in trace
points.

Signed-off-by: David Howells <dhowells@redhat.com>
2020-05-31 15:19:51 +01:00
David Howells c410bf0193 rxrpc: Fix the excessive initial retransmission timeout
rxrpc currently uses a fixed 4s retransmission timeout until the RTT is
sufficiently sampled.  This can cause problems with some fileservers with
calls to the cache manager in the afs filesystem being dropped from the
fileserver because a packet goes missing and the retransmission timeout is
greater than the call expiry timeout.

Fix this by:

 (1) Copying the RTT/RTO calculation code from Linux's TCP implementation
     and altering it to fit rxrpc.

 (2) Altering the various users of the RTT to make use of the new SRTT
     value.

 (3) Replacing the use of rxrpc_resend_timeout to use the calculated RTO
     value instead (which is needed in jiffies), along with a backoff.

Notes:

 (1) rxrpc provides RTT samples by matching the serial numbers on outgoing
     DATA packets that have the RXRPC_REQUEST_ACK set and PING ACK packets
     against the reference serial number in incoming REQUESTED ACK and
     PING-RESPONSE ACK packets.

 (2) Each packet that is transmitted on an rxrpc connection gets a new
     per-connection serial number, even for retransmissions, so an ACK can
     be cross-referenced to a specific trigger packet.  This allows RTT
     information to be drawn from retransmitted DATA packets also.

 (3) rxrpc maintains the RTT/RTO state on the rxrpc_peer record rather than
     on an rxrpc_call because many RPC calls won't live long enough to
     generate more than one sample.

 (4) The calculated SRTT value is in units of 8ths of a microsecond rather
     than nanoseconds.

The (S)RTT and RTO values are displayed in /proc/net/rxrpc/peers.

Fixes: 17926a7932 ([AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both"")
Signed-off-by: David Howells <dhowells@redhat.com>
2020-05-11 16:42:28 +01:00
Thomas Gleixner 2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00
David Howells bc0e7cf433 rxrpc: Add /proc/net/rxrpc/peers to display peer list
Add /proc/net/rxrpc/peers to display the list of peers currently active.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:52:58 -07:00
Wei Yongjun 770b26de1e rxrpc: Remove set but not used variable 'nowj'
Fixes gcc '-Wunused-but-set-variable' warning:

net/rxrpc/proc.c: In function 'rxrpc_call_seq_show':
net/rxrpc/proc.c:66:29: warning:
 variable 'nowj' set but not used [-Wunused-but-set-variable]
  unsigned long timeout = 0, nowj;
                             ^

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02 10:18:20 -07:00
David Howells 6b97bd7a27 rxrpc: Show some more information through /proc files
Show the four current call IDs in /proc/net/rxrpc/conns.

Show the current packet Rx serial number in /proc/net/rxrpc/calls.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-08-01 13:28:23 +01:00
David Howells 887763bbc3 rxrpc: Display call expect-receive-by timeout in proc
Display in /proc/net/rxrpc/calls the timeout by which a call next expects
to receive a packet.

This makes it easier to debug timeout issues.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-08-01 13:28:23 +01:00
Christoph Hellwig c350637227 proc: introduce proc_create_net{,_data}
Variants of proc_create{,_data} that directly take a struct seq_operations
and deal with network namespaces in ->open and ->release.  All callers of
proc_create + seq_open_net converted over, and seq_{open,release}_net are
removed entirely.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16 07:24:30 +02:00
David Howells 88f2a8257c rxrpc: Fix checker warnings and errors
Fix various issues detected by checker.

Errors:

 (*) rxrpc_discard_prealloc() should be using rcu_assign_pointer to set
     call->socket.

Warnings:

 (*) rxrpc_service_connection_reaper() should be passing NULL rather than 0 to
     trace_rxrpc_conn() as the where argument.

 (*) rxrpc_disconnect_client_call() should get its net pointer via the
     call->conn rather than call->sock to avoid a warning about accessing
     an RCU pointer without protection.

 (*) Proc seq start/stop functions need annotation as they pass locks
     between the functions.

False positives:

 (*) Checker doesn't correctly handle of seq-retry lock context balance in
     rxrpc_find_service_conn_rcu().

 (*) Checker thinks execution may proceed past the BUG() in
     rxrpc_publish_service_conn().

 (*) Variable length array warnings from SKCIPHER_REQUEST_ON_STACK() in
     rxkad.c.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-30 21:05:17 +01:00
Alexey Dobriyan 96890d6252 net: delete /proc THIS_MODULE references
/proc has been ignoring struct file_operations::owner field for 10 years.
Specifically, it started with commit 786d7e1612
("Fix rmmod/read/write races in /proc entries"). Notice the chunk where
inode->i_fop is initialized with proxy struct file_operations for
regular files:

	-               if (de->proc_fops)
	-                       inode->i_fop = de->proc_fops;
	+               if (de->proc_fops) {
	+                       if (S_ISREG(inode->i_mode))
	+                               inode->i_fop = &proc_reg_file_ops;
	+                       else
	+                               inode->i_fop = de->proc_fops;
	+               }

VFS stopped pinning module at this point.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16 15:01:33 -05:00
David Howells 68d6d1ae5c rxrpc: Separate the connection's protocol service ID from the lookup ID
Keep the rxrpc_connection struct's idea of the service ID that is exposed
in the protocol separate from the service ID that's used as a lookup key.

This allows the protocol service ID on a client connection to get upgraded
without making the connection unfindable for other client calls that also
would like to use the upgraded connection.

The connection's actual service ID is then returned through recvmsg() by
way of msg_name.

Whilst we're at it, we get rid of the last_service_id field from each
channel.  The service ID is per-connection, not per-call and an entire
connection is upgraded in one go.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-06-05 14:30:49 +01:00
David Howells 2baec2c3f8 rxrpc: Support network namespacing
Support network namespacing in AF_RXRPC with the following changes:

 (1) All the local endpoint, peer and call lists, locks, counters, etc. are
     moved into the per-namespace record.

 (2) All the connection tracking is moved into the per-namespace record
     with the exception of the client connection ID tree, which is kept
     global so that connection IDs are kept unique per-machine.

 (3) Each namespace gets its own epoch.  This allows each network namespace
     to pretend to be a separate client machine.

 (4) The /proc/net/rxrpc_xxx files are now called /proc/net/rxrpc/xxx and
     the contents reflect the namespace.

fs/afs/ should be okay with this patch as it explicitly requires the current
net namespace to be init_net to permit a mount to proceed at the moment.  It
will, however, need updating so that cells, IP addresses and DNS records are
per-namespace also.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25 13:15:11 -04:00
David Howells 3e018daf04 rxrpc: Show a call's hard-ACK cursors in /proc/net/rxrpc_calls
Show a call's hard-ACK cursors in /proc/net/rxrpc_calls so that a call's
progress can be more easily monitored.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-01-05 11:39:44 +00:00
David Howells 75b54cb57c rxrpc: Add IPv6 support
Add IPv6 support to AF_RXRPC.  With this, AF_RXRPC sockets can be created:

	service = socket(AF_RXRPC, SOCK_DGRAM, PF_INET6);

instead of:

	service = socket(AF_RXRPC, SOCK_DGRAM, PF_INET);

The AFS filesystem doesn't support IPv6 at the moment, though, since that
requires upgrades to some of the RPC calls.

Note that a good portion of this patch is replacing "%pI4:%u" in print
statements with "%pISpc" which is able to handle both protocols and print
the port.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-13 23:09:13 +01:00
David Howells 00e907127e rxrpc: Preallocate peers, conns and calls for incoming service requests
Make it possible for the data_ready handler called from the UDP transport
socket to completely instantiate an rxrpc_call structure and make it
immediately live by preallocating all the memory it might need.  The idea
is to cut out the background thread usage as much as possible.

[Note that the preallocated structs are not actually used in this patch -
 that will be done in a future patch.]

If insufficient resources are available in the preallocation buffers, it
will be possible to discard the DATA packet in the data_ready handler or
schedule a BUSY packet without the need to schedule an attempt at
allocation in a background thread.

To this end:

 (1) Preallocate rxrpc_peer, rxrpc_connection and rxrpc_call structs to a
     maximum number each of the listen backlog size.  The backlog size is
     limited to a maxmimum of 32.  Only this many of each can be in the
     preallocation buffer.

 (2) For userspace sockets, the preallocation is charged initially by
     listen() and will be recharged by accepting or rejecting pending
     new incoming calls.

 (3) For kernel services {,re,dis}charging of the preallocation buffers is
     handled manually.  Two notifier callbacks have to be provided before
     kernel_listen() is invoked:

     (a) An indication that a new call has been instantiated.  This can be
     	 used to trigger background recharging.

     (b) An indication that a call is being discarded.  This is used when
     	 the socket is being released.

     A function, rxrpc_kernel_charge_accept() is called by the kernel
     service to preallocate a single call.  It should be passed the user ID
     to be used for that call and a callback to associate the rxrpc call
     with the kernel service's side of the ID.

 (4) Discard the preallocation when the socket is closed.

 (5) Temporarily bump the refcount on the call allocated in
     rxrpc_incoming_call() so that rxrpc_release_call() can ditch the
     preallocation ref on service calls unconditionally.  This will no
     longer be necessary once the preallocation is used.

Note that this does not yet control the number of active service calls on a
client - that will come in a later patch.

A future development would be to provide a setsockopt() call that allows a
userspace server to manually charge the preallocation buffer.  This would
allow user call IDs to be provided in advance and the awkward manual accept
stage to be bypassed.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 11:10:12 +01:00
David Howells 8d94aa381d rxrpc: Calls shouldn't hold socket refs
rxrpc calls shouldn't hold refs on the sock struct.  This was done so that
the socket wouldn't go away whilst the call was in progress, such that the
call could reach the socket's queues.

However, we can mark the socket as requiring an RCU release and rely on the
RCU read lock.

To make this work, we do:

 (1) rxrpc_release_call() removes the call's call user ID.  This is now
     only called from socket operations and not from the call processor:

	rxrpc_accept_call() / rxrpc_kernel_accept_call()
	rxrpc_reject_call() / rxrpc_kernel_reject_call()
	rxrpc_kernel_end_call()
	rxrpc_release_calls_on_socket()
	rxrpc_recvmsg()

     Though it is also called in the cleanup path of
     rxrpc_accept_incoming_call() before we assign a user ID.

 (2) Pass the socket pointer into rxrpc_release_call() rather than getting
     it from the call so that we can get rid of uninitialised calls.

 (3) Fix call processor queueing to pass a ref to the work queue and to
     release that ref at the end of the processor function (or to pass it
     back to the work queue if we have to requeue).

 (4) Skip out of the call processor function asap if the call is complete
     and don't requeue it if the call is complete.

 (5) Clean up the call immediately that the refcount reaches 0 rather than
     trying to defer it.  Actual deallocation is deferred to RCU, however.

 (6) Don't hold socket refs for allocated calls.

 (7) Use the RCU read lock when queueing a message on a socket and treat
     the call's socket pointer according to RCU rules and check it for
     NULL.

     We also need to use the RCU read lock when viewing a call through
     procfs.

 (8) Transmit the final ACK/ABORT to a client call in rxrpc_release_call()
     if this hasn't been done yet so that we can then disconnect the call.
     Once the call is disconnected, it won't have any access to the
     connection struct and the UDP socket for the call work processor to be
     able to send the ACK.  Terminal retransmission will be handled by the
     connection processor.

 (9) Release all calls immediately on the closing of a socket rather than
     trying to defer this.  Incomplete calls will be aborted.

The call refcount model is much simplified.  Refs are held on the call by:

 (1) A socket's user ID tree.

 (2) A socket's incoming call secureq and acceptq.

 (3) A kernel service that has a call in progress.

 (4) A queued call work processor.  We have to take care to put any call
     that we failed to queue.

 (5) sk_buffs on a socket's receive queue.  A future patch will get rid of
     this.

Whilst we're at it, we can do:

 (1) Get rid of the RXRPC_CALL_EV_RELEASE event.  Release is now done
     entirely from the socket routines and never from the call's processor.

 (2) Get rid of the RXRPC_CALL_DEAD state.  Calls now end in the
     RXRPC_CALL_COMPLETE state.

 (3) Get rid of the rxrpc_call::destroyer work item.  Calls are now torn
     down when their refcount reaches 0 and then handed over to RCU for
     final cleanup.

 (4) Get rid of the rxrpc_call::deadspan timer.  Calls are cleaned up
     immediately they're finished with and don't hang around.
     Post-completion retransmission is handled by the connection processor
     once the call is disconnected.

 (5) Get rid of the dead call expiry setting as there's no longer a timer
     to set.

 (6) rxrpc_destroy_all_calls() can just check that the call list is empty.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-07 15:33:20 +01:00
David Howells f5c17aaeb2 rxrpc: Calls should only have one terminal state
Condense the terminal states of a call state machine to a single state,
plus a separate completion type value.  The value is then set, along with
error and abort code values, only when the call is transitioned to the
completion state.

Helpers are provided to simplify this.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-30 15:58:31 +01:00
David Howells 4d028b2c82 rxrpc: Dup the main conn list for the proc interface
The main connection list is used for two independent purposes: primarily it
is used to find connections to reap and secondarily it is used to list
connections in procfs.

Split the procfs list out from the reap list.  This allows us to stop using
the reap list for client connections when they acquire a separate
management strategy from service collections.

The client connections will not be on a management single list, and sometimes
won't be on a management list at all.  This doesn't leave them floating,
however, as they will also be on an rb-tree rooted on the socket so that the
socket can find them to dispatch calls.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 15:17:14 +01:00
David Howells df5d8bf70f rxrpc: Make /proc/net/rxrpc_calls safer
Make /proc/net/rxrpc_calls safer by stashing a copy of the peer pointer in
the rxrpc_call struct and checking in the show routine that the peer
pointer, the socket pointer and the local pointer obtained from the socket
pointer aren't NULL before we use them.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 15:15:59 +01:00
David Howells 563ea7d5d4 rxrpc: Calculate serial skew on packet reception
Calculate the serial number skew in the data_ready handler when a packet
has been received and a connection looked up.  The skew is cached in the
sk_buff's priority field.

The connection highest received serial number is updated at this time also.
This can be done without locks or atomic instructions because, at this
point, the code is serialised by the socket.

This generates more accurate skew data because if the packet is offloaded
to a work queue before this is determined, more packets may come in,
bumping the highest serial number and thereby increasing the apparent skew.

This also removes some unnecessary atomic ops.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-23 16:02:35 +01:00
David Howells dabe5a7906 rxrpc: Tidy up the rxrpc_call struct a bit
Do a little tidying of the rxrpc_call struct:

 (1) in_clientflag is no longer compared against the value that's in the
     packet, so keeping it in this form isn't necessary.  Use a flag in
     flags instead and provide a pair of wrapper functions.

 (2) We don't read the epoch value, so that can go.

 (3) Move what remains of the data that were used for hashing up in the
     struct to be with the channel number.

 (4) Get rid of the local pointer.  We can get at this via the socket
     struct and we only use this in the procfs viewer.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-23 15:27:24 +01:00
David Howells a1399f8bb0 rxrpc: Call channels should have separate call number spaces
Each channel on a connection has a separate, independent number space from
which to allocate callNumber values.  It is entirely possible, for example,
to have a connection with four active calls, each with call number 1.

Note that the callNumber values for any particular channel don't have to
start at 1, but they are supposed to increment monotonically for that
channel from a client's perspective and may not be reused once the call
number is transmitted (until the epoch cycles all the way back round).

Currently, however, call numbers are allocated on a per-connection basis
and, further, are held in an rb-tree.  The rb-tree is redundant as the four
channel pointers in the rxrpc_connection struct are entirely capable of
pointing to all the calls currently in progress on a connection.

To this end, make the following changes:

 (1) Handle call number allocation independently per channel.

 (2) Get rid of the conn->calls rb-tree.  This is overkill as a connection
     may have a maximum of four calls in progress at any one time.  Use the
     pointers in the channels[] array instead, indexed by the channel
     number from the packet.

 (3) For each channel, save the result of the last call that was in
     progress on that channel in conn->channels[] so that the final ACK or
     ABORT packet can be replayed if necessary.  Any call earlier than that
     is just ignored.  If we've seen the next call number in a packet, the
     last one is most definitely defunct.

 (4) When generating a RESPONSE packet for a connection, the call number
     counter for each channel must be included in it.

 (5) When parsing a RESPONSE packet for a connection, the call number
     counters contained therein should be used to set the minimum expected
     call numbers on each channel.

To do in future commits:

 (1) Replay terminal packets based on the last call stored in
     conn->channels[].

 (2) Connections should be retired before the callNumber space on any
     channel runs out.

 (3) A server is expected to disregard or reject any new incoming call that
     has a call number less than the current call number counter.  The call
     number counter for that channel must be advanced to the new call
     number.

     Note that the server cannot just require that the next call that it
     sees on a channel be exactly the call number counter + 1 because then
     there's a scenario that could cause a problem: The client transmits a
     packet to initiate a connection, the network goes out, the server
     sends an ACK (which gets lost), the client sends an ABORT (which also
     gets lost); the network then reconnects, the client then reuses the
     call number for the next call (it doesn't know the server already saw
     the call number), but the server thinks it already has the first
     packet of this call (it doesn't know that the client doesn't know that
     it saw the call number the first time).

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:43:52 +01:00
David Howells bba304db34 rxrpc: Turn connection #defines into enums and put outside struct def
Turn the connection event and state #define lists into enums and move
outside of the struct definition.

Whilst we're at it, change _SERVER to _SERVICE in those identifiers and add
EV_ into the event name to distinguish them from flags and states.

Also add a symbol indicating the number of states and use that in the state
text array.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:43:51 +01:00
David Howells f4e7da8cde rxrpc: Calls displayed in /proc may in future lack a connection
Allocated rxrpc calls displayed in /proc/net/rxrpc_calls may in future be
on the proc list before they're connected or after they've been
disconnected - in which case they may not have a pointer to a connection
struct that can be used to get data from there.

Deal with this by using stuff from the call struct in preference where
possible and printing "no_connection" rather than a peer address if no
connection is assigned.

This change also has the added bonus that the service ID is now taken from
the call rather the connection which will allow per-call service upgrades
to be shown - something required for AuriStor server compatibility.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-22 09:17:51 +01:00
David Howells 85f32278bd rxrpc: Replace conn->trans->{local,peer} with conn->params.{local,peer}
Replace accesses of conn->trans->{local,peer} with
conn->params.{local,peer} thus making it easier for a future commit to
remove the rxrpc_transport struct.

This also reduces the number of memory accesses involved.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-22 09:10:00 +01:00
David Howells 19ffa01c9c rxrpc: Use structs to hold connection params and protocol info
Define and use a structure to hold connection parameters.  This makes it
easier to pass multiple connection parameters around.

Define and use a structure to hold protocol information used to hash a
connection for lookup on incoming packet.  Most of these fields will be
disposed of eventually, including the duplicate local pointer.

Whilst we're at it rename "proto" to "family" when referring to a protocol
family.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-22 09:09:59 +01:00
David Howells 8c3e34a4ff rxrpc: Rename files matching ar-*.c to git rid of the "ar-" prefix
Rename files matching net/rxrpc/ar-*.c to get rid of the "ar-" prefix.
This will aid splitting those files by making easier to come up with new
names.

Note that the not all files are simply renamed from ar-X.c to X.c.  The
following exceptions are made:

 (*) ar-call.c -> call_object.c
     ar-ack.c -> call_event.c

     call_object.c is going to contain the core of the call object
     handling.  Call event handling is all going to be in call_event.c.

 (*) ar-accept.c -> call_accept.c

     Incoming call handling is going to be here.

 (*) ar-connection.c -> conn_object.c
     ar-connevent.c -> conn_event.c

     The former file is going to have the basic connection object handling,
     but there will likely be some differentiation between client
     connections and service connections in additional files later.  The
     latter file will have all the connection-level event handling.

 (*) ar-local.c -> local_object.c

     This will have the local endpoint object handling code.  The local
     endpoint event handling code will later be split out into
     local_event.c.

 (*) ar-peer.c -> peer_object.c

     This will have the peer endpoint object handling code.  Peer event
     handling code will be placed in peer_event.c (for the moment, there is
     none).

 (*) ar-error.c -> peer_event.c

     This will become the peer event handling code, though for the moment
     it's actually driven from the local endpoint's perspective.

Note that I haven't renamed ar-transport.c to transport_object.c as the
intention is to delete it when the rxrpc_transport struct is excised.

The only file that actually has its contents changed is net/rxrpc/Makefile.

net/rxrpc/ar-internal.h will need its section marker comments updating, but
I'll do that in a separate patch to make it easier for git to follow the
history across the rename.  I may also want to rename ar-internal.h at some
point - but that would mean updating all the #includes and I'd rather do
that in a separate step.

Signed-off-by: David Howells <dhowells@redhat.com.
2016-06-13 12:16:05 +01:00
David Howells 63b6be55e8 [AF_RXRPC]: Delete the old RxRPC code.
Delete the old RxRPC code as it's now no longer used.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 15:55:48 -07:00
Arjan van de Ven da7071d7e3 [PATCH] mark struct file_operations const 8
Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:46 -08:00
Kris Katterjohn a8fc3d8dec [NET]: "signed long" -> "long"
Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-17 13:03:54 -08:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00