[ Upstream commit 0201ebf274 ]
Patch series "mm, netfs, fscache: Stop read optimisation when folio
removed from pagecache", v7.
This fixes an optimisation in fscache whereby we don't read from the cache
for a particular file until we know that there's data there that we don't
have in the pagecache. The problem is that I'm no longer using PG_fscache
(aka PG_private_2) to indicate that the page is cached and so I don't get
a notification when a cached page is dropped from the pagecache.
The first patch merges some folio_has_private() and
filemap_release_folio() pairs and introduces a helper,
folio_needs_release(), to indicate if a release is required.
The second patch is the actual fix. Following Willy's suggestions[1], it
adds an AS_RELEASE_ALWAYS flag to an address_space that will make
filemap_release_folio() always call ->release_folio(), even if
PG_private/PG_private_2 aren't set. folio_needs_release() is altered to
add a check for this.
This patch (of 2):
Make filemap_release_folio() check folio_has_private(). Then, in most
cases, where a call to folio_has_private() is immediately followed by a
call to filemap_release_folio(), we can get rid of the test in the pair.
There are a couple of sites in mm/vscan.c that this can't so easily be
done. In shrink_folio_list(), there are actually three cases (something
different is done for incompletely invalidated buffers), but
filemap_release_folio() elides two of them.
In shrink_active_list(), we don't have have the folio lock yet, so the
check allows us to avoid locking the page unnecessarily.
A wrapper function to check if a folio needs release is provided for those
places that still need to do it in the mm/ directory. This will acquire
additional parts to the condition in a future patch.
After this, the only remaining caller of folio_has_private() outside of
mm/ is a check in fuse.
Link: https://lkml.kernel.org/r/20230628104852.3391651-1-dhowells@redhat.com
Link: https://lkml.kernel.org/r/20230628104852.3391651-2-dhowells@redhat.com
Reported-by: Rohith Surabattula <rohiths.msft@gmail.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steve French <sfrench@samba.org>
Cc: Shyam Prasad N <nspmangalore@gmail.com>
Cc: Rohith Surabattula <rohiths.msft@gmail.com>
Cc: Dave Wysochanski <dwysocha@redhat.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Xiubo Li <xiubli@redhat.com>
Cc: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 1898efcdbe ("block: update the stable_writes flag in bdev_add")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6dd8fe86fa ]
Patch series "Removing the try_to_release_page() wrapper", v3.
This patchset replaces the remaining calls of try_to_release_page() with
the folio equivalent: filemap_release_folio(). This allows us to remove
the wrapper.
This patch (of 4):
Convert move_extent_per_page() to use folios. This change removes 5 calls
to compound_head() and is in preparation for the removal of the
try_to_release_page() wrapper.
Link: https://lkml.kernel.org/r/20221118073055.55694-1-vishal.moola@gmail.com
Link: https://lkml.kernel.org/r/20221118073055.55694-2-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 1898efcdbe ("block: update the stable_writes flag in bdev_add")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2dcf5fde6d upstream.
For files with logical blocks close to EXT_MAX_BLOCKS, the file size
predicted in ext4_mb_normalize_request() may exceed EXT_MAX_BLOCKS.
This can cause some blocks to be preallocated that will not be used.
And after [Fixes], the following issue may be triggered:
=========================================================
kernel BUG at fs/ext4/mballoc.c:4653!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 1 PID: 2357 Comm: xfs_io 6.7.0-rc2-00195-g0f5cc96c367f
Hardware name: linux,dummy-virt (DT)
pc : ext4_mb_use_inode_pa+0x148/0x208
lr : ext4_mb_use_inode_pa+0x98/0x208
Call trace:
ext4_mb_use_inode_pa+0x148/0x208
ext4_mb_new_inode_pa+0x240/0x4a8
ext4_mb_use_best_found+0x1d4/0x208
ext4_mb_try_best_found+0xc8/0x110
ext4_mb_regular_allocator+0x11c/0xf48
ext4_mb_new_blocks+0x790/0xaa8
ext4_ext_map_blocks+0x7cc/0xd20
ext4_map_blocks+0x170/0x600
ext4_iomap_begin+0x1c0/0x348
=========================================================
Here is a calculation when adjusting ac_b_ex in ext4_mb_new_inode_pa():
ex.fe_logical = orig_goal_end - EXT4_C2B(sbi, ex.fe_len);
if (ac->ac_o_ex.fe_logical >= ex.fe_logical)
goto adjust_bex;
The problem is that when orig_goal_end is subtracted from ac_b_ex.fe_len
it is still greater than EXT_MAX_BLOCKS, which causes ex.fe_logical to
overflow to a very small value, which ultimately triggers a BUG_ON in
ext4_mb_new_inode_pa() because pa->pa_free < len.
The last logical block of an actual write request does not exceed
EXT_MAX_BLOCKS, so in ext4_mb_normalize_request() also avoids normalizing
the last logical block to exceed EXT_MAX_BLOCKS to avoid the above issue.
The test case in [Link] can reproduce the above issue with 64k block size.
Link: https://patchwork.kernel.org/project/fstests/list/?series=804003
Cc: <stable@kernel.org> # 6.4
Fixes: 93cdf49f6e ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231127063313.3734294-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 619f75dae2 ]
The syzbot has reported that it can hit the warning in
ext4_dio_write_end_io() because i_size < i_disksize. Indeed the
reproducer creates a race between DIO IO completion and truncate
expanding the file and thus ext4_dio_write_end_io() sees an inconsistent
inode state where i_disksize is already updated but i_size is not
updated yet. Since we are careful when setting up DIO write and consider
it extending (and thus performing the IO synchronously with i_rwsem held
exclusively) whenever it goes past either of i_size or i_disksize, we
can use the same test during IO completion without risking entering
ext4_handle_inode_extension() without i_rwsem held. This way we make it
obvious both i_size and i_disksize are large enough when we report DIO
completion without relying on unreliable WARN_ON.
Reported-by: <syzbot+47479b71cdfc78f56d30@syzkaller.appspotmail.com>
Fixes: 91562895f8 ("ext4: properly sync file size update after O_SYNC direct IO")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20231130095653.22679-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e387c89e9 ]
__insert_pending() allocate memory in atomic context, so the allocation
could fail, but we are not handling that failure now. It could lead
ext4_es_remove_extent() to get wrong reserved clusters, and the global
data blocks reservation count will be incorrect. The same to
extents_status entry preallocation, preallocate pending entry out of the
i_es_lock with __GFP_NOFAIL, make sure __insert_pending() and
__revise_pending() always succeeds.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230824092619.1327976-3-yi.zhang@huaweicloud.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 768d612f79 ]
Yikebaer reported an issue:
==================================================================
BUG: KASAN: slab-use-after-free in ext4_es_insert_extent+0xc68/0xcb0
fs/ext4/extents_status.c:894
Read of size 4 at addr ffff888112ecc1a4 by task syz-executor/8438
CPU: 1 PID: 8438 Comm: syz-executor Not tainted 6.5.0-rc5 #1
Call Trace:
[...]
kasan_report+0xba/0xf0 mm/kasan/report.c:588
ext4_es_insert_extent+0xc68/0xcb0 fs/ext4/extents_status.c:894
ext4_map_blocks+0x92a/0x16f0 fs/ext4/inode.c:680
ext4_alloc_file_blocks.isra.0+0x2df/0xb70 fs/ext4/extents.c:4462
ext4_zero_range fs/ext4/extents.c:4622 [inline]
ext4_fallocate+0x251c/0x3ce0 fs/ext4/extents.c:4721
[...]
Allocated by task 8438:
[...]
kmem_cache_zalloc include/linux/slab.h:693 [inline]
__es_alloc_extent fs/ext4/extents_status.c:469 [inline]
ext4_es_insert_extent+0x672/0xcb0 fs/ext4/extents_status.c:873
ext4_map_blocks+0x92a/0x16f0 fs/ext4/inode.c:680
ext4_alloc_file_blocks.isra.0+0x2df/0xb70 fs/ext4/extents.c:4462
ext4_zero_range fs/ext4/extents.c:4622 [inline]
ext4_fallocate+0x251c/0x3ce0 fs/ext4/extents.c:4721
[...]
Freed by task 8438:
[...]
kmem_cache_free+0xec/0x490 mm/slub.c:3823
ext4_es_try_to_merge_right fs/ext4/extents_status.c:593 [inline]
__es_insert_extent+0x9f4/0x1440 fs/ext4/extents_status.c:802
ext4_es_insert_extent+0x2ca/0xcb0 fs/ext4/extents_status.c:882
ext4_map_blocks+0x92a/0x16f0 fs/ext4/inode.c:680
ext4_alloc_file_blocks.isra.0+0x2df/0xb70 fs/ext4/extents.c:4462
ext4_zero_range fs/ext4/extents.c:4622 [inline]
ext4_fallocate+0x251c/0x3ce0 fs/ext4/extents.c:4721
[...]
==================================================================
The flow of issue triggering is as follows:
1. remove es
raw es es removed es1
|-------------------| -> |----|.......|------|
2. insert es
es insert es1 merge with es es1 merge with es and free es1
|----|.......|------| -> |------------|------| -> |-------------------|
es merges with newes, then merges with es1, frees es1, then determines
if es1->es_len is 0 and triggers a UAF.
The code flow is as follows:
ext4_es_insert_extent
es1 = __es_alloc_extent(true);
es2 = __es_alloc_extent(true);
__es_remove_extent(inode, lblk, end, NULL, es1)
__es_insert_extent(inode, &newes, es1) ---> insert es1 to es tree
__es_insert_extent(inode, &newes, es2)
ext4_es_try_to_merge_right
ext4_es_free_extent(inode, es1) ---> es1 is freed
if (es1 && !es1->es_len)
// Trigger UAF by determining if es1 is used.
We determine whether es1 or es2 is used immediately after calling
__es_remove_extent() or __es_insert_extent() to avoid triggering a
UAF if es1 or es2 is freed.
Reported-by: Yikebaer Aizezi <yikebaer61@gmail.com>
Closes: https://lore.kernel.org/lkml/CALcu4raD4h9coiyEBL4Bm0zjDwxC2CyPiTwsP3zFuhot6y9Beg@mail.gmail.com
Fixes: 2a69c45008 ("ext4: using nofail preallocation in ext4_es_insert_extent()")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230815070808.3377171-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 8e387c89e9 ("ext4: make sure allocate pending entry not fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a69c45008 ]
Similar to in ext4_es_insert_delayed_block(), we use preallocations that
do not fail to avoid inconsistencies, but we do not care about es that are
not must be kept, and we return 0 even if such es memory allocation fails.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-9-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 8e387c89e9 ("ext4: make sure allocate pending entry not fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a2d98447b ]
Similar to in ext4_es_remove_extent(), we use a no-fail preallocation
to avoid inconsistencies, except that here we may have to preallocate
two extent_status.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-8-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 8e387c89e9 ("ext4: make sure allocate pending entry not fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9fe2b882b ]
If __es_remove_extent() returns an error it means that when splitting
extent, allocating an extent that must be kept failed, where returning
an error directly would cause the extent tree to be inconsistent. So we
use GFP_NOFAIL to pre-allocate an extent_status and pass it to
__es_remove_extent() to avoid this problem.
In addition, since the allocated memory is outside the i_es_lock, the
extent_status tree may change and the pre-allocated extent_status is
no longer needed, so we release the pre-allocated extent_status when
es->es_len is not initialized.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-7-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 8e387c89e9 ("ext4: make sure allocate pending entry not fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bda3efaf77 ]
When splitting extent, if the second extent can not be dropped, we return
-ENOMEM and use GFP_NOFAIL to preallocate an extent_status outside of
i_es_lock and pass it to __es_remove_extent() to be used as the second
extent. This ensures that __es_remove_extent() is executed successfully,
thus ensuring consistency in the extent status tree. If the second extent
is not undroppable, we simply drop it and return 0. Then retry is no longer
necessary, remove it.
Now, __es_remove_extent() will always remove what it should, maybe more.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-6-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 8e387c89e9 ("ext4: make sure allocate pending entry not fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95f0b32033 ]
Pass a extent_status pointer prealloc to __es_insert_extent(). If the
pointer is non-null, it is used directly when a new extent_status is
needed to avoid memory allocation failures.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 8e387c89e9 ("ext4: make sure allocate pending entry not fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73a2f03365 ]
Factor out __es_alloc_extent() and __es_free_extent(), which only allocate
and free extent_status in these two helpers.
The ext4_es_alloc_extent() function is split into __es_alloc_extent()
and ext4_es_init_extent(). In __es_alloc_extent() we allocate memory using
GFP_KERNEL | __GFP_NOFAIL | __GFP_ZERO if the memory allocation cannot
fail, otherwise we use GFP_ATOMIC. and the ext4_es_init_extent() is used to
initialize extent_status and update related variables after a successful
allocation.
This is to prepare for the use of pre-allocated extent_status later.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 8e387c89e9 ("ext4: make sure allocate pending entry not fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9649eb18c6 ]
In the extent status tree, we have extents which we can just drop without
issues and extents we must not drop - this depends on the extent's status
- currently ext4_es_is_delayed() extents must stay, others may be dropped.
A helper function is added to help determine if the current extent can
be dropped, although only ext4_es_is_delayed() extents cannot be dropped
currently.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 8e387c89e9 ("ext4: make sure allocate pending entry not fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 91562895f8 upstream.
Gao Xiang has reported that on ext4 O_SYNC direct IO does not properly
sync file size update and thus if we crash at unfortunate moment, the
file can have smaller size although O_SYNC IO has reported successful
completion. The problem happens because update of on-disk inode size is
handled in ext4_dio_write_iter() *after* iomap_dio_rw() (and thus
dio_complete() in particular) has returned and generic_file_sync() gets
called by dio_complete(). Fix the problem by handling on-disk inode size
update directly in our ->end_io completion handler.
References: https://lore.kernel.org/all/02d18236-26ef-09b0-90ad-030c4fe3ee20@linux.alibaba.com
Reported-by: Gao Xiang <hsiangkao@linux.alibaba.com>
CC: stable@vger.kernel.org
Fixes: 378f32bab3 ("ext4: introduce direct I/O write using iomap infrastructure")
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20231013121350.26872-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40dd7953f4 upstream.
Wrong check of gdb backup in meta bg as following:
first_group is the first group of meta_bg which contains target group, so
target group is always >= first_group. We check if target group has gdb
backup by comparing first_group with [group + 1] and [group +
EXT4_DESC_PER_BLOCK(sb) - 1]. As group >= first_group, then [group + N] is
> first_group. So no copy of gdb backup in meta bg is done in
setup_new_flex_group_blocks.
No need to do gdb backup copy in meta bg from setup_new_flex_group_blocks
as we always copy updated gdb block to backups at end of
ext4_flex_group_add as following:
ext4_flex_group_add
/* no gdb backup copy for meta bg any more */
setup_new_flex_group_blocks
/* update current group number */
ext4_update_super
sbi->s_groups_count += flex_gd->count;
/*
* if group in meta bg contains backup is added, the primary gdb block
* of the meta bg will be copy to backup in new added group here.
*/
for (; gdb_num <= gdb_num_end; gdb_num++)
update_backups(...)
In summary, we can remove wrong gdb backup copy code in
setup_new_flex_group_blocks.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40ea98396a upstream.
When big allocate feature is enabled, we need to count and update
reserved clusters before removing a delayed only extent_status entry.
{init|count|get}_rsvd() have already done this, but the start block
number of this counting isn't correct in the following case.
lblk end
| |
v v
-------------------------
| | orig_es
-------------------------
^ ^
len1 is 0 | len2 |
If the start block of the orig_es entry founded is bigger than lblk, we
passed lblk as start block to count_rsvd(), but the length is correct,
finally, the range to be counted is offset. This patch fix this by
passing the start blocks to 'orig_es->lblk + len1'.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230824092619.1327976-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2cd8bdb5ef upstream.
** Short Version **
In ext4 with dioread_nolock, we could have a scenario where the bh returned by
get_blocks (ext4_get_block_unwritten()) in __block_write_begin_int() has
UNWRITTEN and MAPPED flag set. Since such a bh does not have NEW flag set we
never zero out the range of bh that is not under write, causing whatever stale
data is present in the folio at that time to be written out to disk. To fix this
mark the buffer as new, in case it is unwritten, in ext4_get_block_unwritten().
** Long Version **
The issue mentioned above was resulting in two different bugs:
1. On block size < page size case in ext4, generic/269 was reliably
failing with dioread_nolock. The state of the write was as follows:
* The write was extending i_size.
* The last block of the file was fallocated and had an unwritten extent
* We were near ENOSPC and hence we were switching to non-delayed alloc
allocation.
In this case, the back trace that triggers the bug is as follows:
ext4_da_write_begin()
/* switch to nodelalloc due to low space */
ext4_write_begin()
ext4_should_dioread_nolock() // true since mount flags still have delalloc
__block_write_begin(..., ext4_get_block_unwritten)
__block_write_begin_int()
for(each buffer head in page) {
/* first iteration, this is bh1 which contains i_size */
if (!buffer_mapped)
get_block() /* returns bh with only UNWRITTEN and MAPPED */
/* second iteration, bh2 */
if (!buffer_mapped)
get_block() /* we fail here, could be ENOSPC */
}
if (err)
/*
* this would zero out all new buffers and mark them uptodate.
* Since bh1 was never marked new, we skip it here which causes
* the bug later.
*/
folio_zero_new_buffers();
/* ext4_wrte_begin() error handling */
ext4_truncate_failed_write()
ext4_truncate()
ext4_block_truncate_page()
__ext4_block_zero_page_range()
if(!buffer_uptodate())
ext4_read_bh_lock()
ext4_read_bh() -> ... ext4_submit_bh_wbc()
BUG_ON(buffer_unwritten(bh)); /* !!! */
2. The second issue is stale data exposure with page size >= blocksize
with dioread_nolock. The conditions needed for it to happen are same as
the previous issue ie dioread_nolock around ENOSPC condition. The issue
is also similar where in __block_write_begin_int() when we call
ext4_get_block_unwritten() on the buffer_head and the underlying extent
is unwritten, we get an unwritten and mapped buffer head. Since it is
not new, we never zero out the partial range which is not under write,
thus writing stale data to disk. This can be easily observed with the
following reproducer:
fallocate -l 4k testfile
xfs_io -c "pwrite 2k 2k" testfile
# hexdump output will have stale data in from byte 0 to 2k in testfile
hexdump -C testfile
NOTE: To trigger this, we need dioread_nolock enabled and write happening via
ext4_write_begin(), which is usually used when we have -o nodealloc. Since
dioread_nolock is disabled with nodelalloc, the only alternate way to call
ext4_write_begin() is to ensure that delayed alloc switches to nodelalloc ie
ext4_da_write_begin() calls ext4_write_begin(). This will usually happen when
ext4 is almost full like the way generic/269 was triggering it in Issue 1 above.
This might make the issue harder to hit. Hence, for reliable replication, I used
the below patch to temporarily allow dioread_nolock with nodelalloc and then
mount the disk with -o nodealloc,dioread_nolock. With this you can hit the stale
data issue 100% of times:
@@ -508,8 +508,8 @@ static inline int ext4_should_dioread_nolock(struct inode *inode)
if (ext4_should_journal_data(inode))
return 0;
/* temporary fix to prevent generic/422 test failures */
- if (!test_opt(inode->i_sb, DELALLOC))
- return 0;
+ // if (!test_opt(inode->i_sb, DELALLOC))
+ // return 0;
return 1;
}
After applying this patch to mark buffer as NEW, both the above issues are
fixed.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/d0ed09d70a9733fbb5349c5c7b125caac186ecdf.1695033645.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31f13421c0 upstream.
Commit 0aeaa2559d ("ext4: fix corruption when online resizing a 1K
bigalloc fs") found that primary superblock's offset in its group is
not equal to offset of backup superblock in its group when block size
is 1K and bigalloc is enabled. As group descriptor blocks are right
after superblock, we can't pass block number of gdb to update_backups
for the same reason.
The root casue of the issue above is that leading 1K padding block is
count as data block offset for primary block while backup block has no
padding block offset in its group.
Remove padding data block count to fix the issue for gdb backups.
For meta_bg case, update_backups treat blk_off as block number, do no
conversion in this case.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bedc5d3463 upstream.
Let's say we want to allocate 2 blocks starting from 4294966386, after
predicting the file size, start is aligned to 4294965248, len is changed
to 2048, then end = start + size = 0x100000000. Since end is of
type ext4_lblk_t, i.e. uint, end is truncated to 0.
This causes (pa->pa_lstart >= end) to always hold when checking if the
current extent to be allocated crosses already preallocated blocks, so the
resulting ac_g_ex may cross already preallocated blocks. Hence we convert
the end type to loff_t and use pa_logical_end() to avoid overflow.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc056e7163 upstream.
When we calculate the end position of ext4_free_extent, this position may
be exactly where ext4_lblk_t (i.e. uint) overflows. For example, if
ac_g_ex.fe_logical is 4294965248 and ac_orig_goal_len is 2048, then the
computed end is 0x100000000, which is 0. If ac->ac_o_ex.fe_logical is not
the first case of adjusting the best extent, that is, new_bex_end > 0, the
following BUG_ON will be triggered:
=========================================================
kernel BUG at fs/ext4/mballoc.c:5116!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 673 Comm: xfs_io Tainted: G E 6.5.0-rc1+ #279
RIP: 0010:ext4_mb_new_inode_pa+0xc5/0x430
Call Trace:
<TASK>
ext4_mb_use_best_found+0x203/0x2f0
ext4_mb_try_best_found+0x163/0x240
ext4_mb_regular_allocator+0x158/0x1550
ext4_mb_new_blocks+0x86a/0xe10
ext4_ext_map_blocks+0xb0c/0x13a0
ext4_map_blocks+0x2cd/0x8f0
ext4_iomap_begin+0x27b/0x400
iomap_iter+0x222/0x3d0
__iomap_dio_rw+0x243/0xcb0
iomap_dio_rw+0x16/0x80
=========================================================
A simple reproducer demonstrating the problem:
mkfs.ext4 -F /dev/sda -b 4096 100M
mount /dev/sda /tmp/test
fallocate -l1M /tmp/test/tmp
fallocate -l10M /tmp/test/file
fallocate -i -o 1M -l16777203M /tmp/test/file
fsstress -d /tmp/test -l 0 -n 100000 -p 8 &
sleep 10 && killall -9 fsstress
rm -f /tmp/test/tmp
xfs_io -c "open -ad /tmp/test/file" -c "pwrite -S 0xff 0 8192"
We simply refactor the logic for adjusting the best extent by adding
a temporary ext4_free_extent ex and use extent_logical_end() to avoid
overflow, which also simplifies the code.
Cc: stable@kernel.org # 6.4
Fixes: 93cdf49f6e ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 43bbddc067 upstream.
When we use lstart + len to calculate the end of free extent or prealloc
space, it may exceed the maximum value of 4294967295(0xffffffff) supported
by ext4_lblk_t and cause overflow, which may lead to various problems.
Therefore, we add two helper functions, extent_logical_end() and
pa_logical_end(), to limit the type of end to loff_t, and also convert
lstart to loff_t for calculation to avoid overflow.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5229a658f6 ]
Len Brown has reported that system suspend sometimes fail due to
inability to freeze a task working in ext4_trim_fs() for one minute.
Trimming a large filesystem on a disk that slowly processes discard
requests can indeed take a long time. Since discard is just an advisory
call, it is perfectly fine to interrupt it at any time and the return
number of discarded blocks until that moment. Do that when we detect the
task is being frozen.
Cc: stable@kernel.org
Reported-by: Len Brown <lenb@kernel.org>
Suggested-by: Dave Chinner <david@fromorbit.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=216322
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230913150504.9054-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45e4ab320c ]
Currently we set the group's trimmed bit in ext4_trim_all_free() based
on return value of ext4_try_to_trim_range(). However when we will want
to abort trimming because of suspend attempt, we want to return success
from ext4_try_to_trim_range() but not set the trimmed bit. Instead
implementing awkward propagation of this information, just move setting
of trimmed bit into ext4_try_to_trim_range() when the whole group is
trimmed.
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230913150504.9054-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7fda67e8c3 upstream.
With the configuration PAGE_SIZE 64k and filesystem blocksize 64k,
a problem occurred when more than 13 million files were directly created
under a directory:
EXT4-fs error (device xx): ext4_dx_csum_set:492: inode #xxxx: comm xxxxx: dir seems corrupt? Run e2fsck -D.
EXT4-fs error (device xx): ext4_dx_csum_verify:463: inode #xxxx: comm xxxxx: dir seems corrupt? Run e2fsck -D.
EXT4-fs error (device xx): dx_probe:856: inode #xxxx: block 8188: comm xxxxx: Directory index failed checksum
When enough files are created, the fake_dirent->reclen will be 0xffff.
it doesn't equal to the blocksize 65536, i.e. 0x10000.
But it is not the same condition when blocksize equals to 4k.
when enough files are created, the fake_dirent->reclen will be 0x1000.
it equals to the blocksize 4k, i.e. 0x1000.
The problem seems to be related to the limitation of the 16-bit field
when the blocksize is set to 64k.
To address this, helpers like ext4_rec_len_{from,to}_disk has already
been introduced to complete the conversion between the encoded and the
plain form of rec_len.
So fix this one by using the helper, and all the other in this file too.
Cc: stable@kernel.org
Fixes: dbe8944404 ("ext4: Calculate and verify checksums for htree nodes")
Suggested-by: Andreas Dilger <adilger@dilger.ca>
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20230803060938.1929759-1-zhangshida@kylinos.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ca4b085f4 upstream.
If the filename casefolding fails, we'll be leaking memory from the
fscrypt_name struct, namely from the 'crypto_buf.name' member.
Make sure we free it in the error path on both ext4_fname_setup_filename()
and ext4_fname_prepare_lookup() functions.
Cc: stable@kernel.org
Fixes: 1ae98e295f ("ext4: optimize match for casefolded encrypted dirs")
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230803091713.13239-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68228da51c upstream.
When setup_system_zone, flex_bg is not initialized so it is always 1.
Use a new helper function, ext4_num_base_meta_blocks() which does not
depend on sbi->s_log_groups_per_flex being initialized.
[ Squashed two patches in the Link URL's below together into a single
commit, which is simpler to review/understand. Also fix checkpatch
warnings. --TYT ]
Cc: stable@kernel.org
Signed-off-by: Wang Jianjian <wangjianjian0@foxmail.com>
Link: https://lore.kernel.org/r/tencent_21AF0D446A9916ED5C51492CC6C9A0A77B05@qq.com
Link: https://lore.kernel.org/r/tencent_D744D1450CC169AEA77FCF0A64719909ED05@qq.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1524773425 ]
Running generic/475(filesystem consistent tests after power cut) could
easily trigger unattached inode error while doing fsck:
Unattached zero-length inode 39405. Clear? no
Unattached inode 39405
Connect to /lost+found? no
Above inconsistence is caused by following process:
P1 P2
ext4_create
inode = ext4_new_inode_start_handle // itable records nlink=1
ext4_add_nondir
err = ext4_add_entry // ENOSPC
ext4_append
ext4_bread
ext4_getblk
ext4_map_blocks // returns ENOSPC
drop_nlink(inode) // won't be updated into disk inode
ext4_orphan_add(handle, inode)
ext4_orphan_file_add
ext4_journal_stop(handle)
jbd2_journal_commit_transaction // commit success
>> power cut <<
ext4_fill_super
ext4_load_and_init_journal // itable records nlink=1
ext4_orphan_cleanup
ext4_process_orphan
if (inode->i_nlink) // true, inode won't be deleted
Then, allocated inode will be reserved on disk and corresponds to no
dentries, so e2fsck reports 'unattached inode' problem.
The problem won't happen if orphan file feature is disabled, because
ext4_orphan_add() will update disk inode in orphan list mode. There
are several places not updating disk inode while putting inode into
orphan area, such as ext4_add_nondir(), ext4_symlink() and whiteout
in ext4_rename(). Fix it by updating inode into disk in all error
branches of these places.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217605
Fixes: 02f310fcf4 ("ext4: Speedup ext4 orphan inode handling")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230628132011.650383-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60c672b7f2 ]
ngroups is ext4_group_t (unsigned int) while next_linear_group treat it
in int. If ngroups is bigger than max number described by int, it will
be treat as a negative number. Then "return group + 1 >= ngroups ? 0 :
group + 1;" may keep returning 0.
Switch int to ext4_group_t in next_linear_group to fix the overflow.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9ce5993a0 ]
Group corruption check will access memory of grp and will trigger kernel
crash if grp is NULL. So do NULL check before corruption check.
Fixes: 5354b2af34 ("ext4: allow ext4_get_group_info() to fail")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6909cf5c41 upstream.
When run on a file system where the inline_data feature has been
enabled, xfstests generic/269, generic/270, and generic/476 cause ext4
to emit error messages indicating that inline directory entries are
corrupted. This occurs because the inline offset used to locate
inline directory entries in the inode body is not updated when an
xattr in that shared region is deleted and the region is shifted in
memory to recover the space it occupied. If the deleted xattr precedes
the system.data attribute, which points to the inline directory entries,
that attribute will be moved further up in the region. The inline
offset continues to point to whatever is located in system.data's former
location, with unfortunate effects when used to access directory entries
or (presumably) inline data in the inode body.
Cc: stable@kernel.org
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20230522181520.1570360-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de25d6e961 upstream.
In our fault injection test, we create an ext4 file, migrate it to
non-extent based file, then punch a hole and finally trigger a WARN_ON
in the ext4_da_update_reserve_space():
EXT4-fs warning (device sda): ext4_da_update_reserve_space:369:
ino 14, used 11 with only 10 reserved data blocks
When writing back a non-extent based file, if we enable delalloc, the
number of reserved blocks will be subtracted from the number of blocks
mapped by ext4_ind_map_blocks(), and the extent status tree will be
updated. We update the extent status tree by first removing the old
extent_status and then inserting the new extent_status. If the block range
we remove happens to be in an extent, then we need to allocate another
extent_status with ext4_es_alloc_extent().
use old to remove to add new
|----------|------------|------------|
old extent_status
The problem is that the allocation of a new extent_status failed due to a
fault injection, and __es_shrink() did not get free memory, resulting in
a return of -ENOMEM. Then do_writepages() retries after receiving -ENOMEM,
we map to the same extent again, and the number of reserved blocks is again
subtracted from the number of blocks in that extent. Since the blocks in
the same extent are subtracted twice, we end up triggering WARN_ON at
ext4_da_update_reserve_space() because used > ei->i_reserved_data_blocks.
For non-extent based file, we update the number of reserved blocks after
ext4_ind_map_blocks() is executed, which causes a problem that when we call
ext4_ind_map_blocks() to create a block, it doesn't always create a block,
but we always reduce the number of reserved blocks. So we move the logic
for updating reserved blocks to ext4_ind_map_blocks() to ensure that the
number of reserved blocks is updated only after we do succeed in allocating
some new blocks.
Fixes: 5f634d064c ("ext4: Fix quota accounting error with fallocate")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4d13222af upstream.
freeze_bdev() can fail due to a lot of reasons, it needs to check its
reason before later process.
Fixes: 783d948544 ("ext4: add EXT4_IOC_GOINGDOWN ioctl")
Cc: stable@kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230606073203.1310389-1-chao@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26fb529024 upstream.
Following process makes ext4 load stale buffer heads from last failed
mounting in a new mounting operation:
mount_bdev
ext4_fill_super
| ext4_load_and_init_journal
| ext4_load_journal
| jbd2_journal_load
| load_superblock
| journal_get_superblock
| set_buffer_verified(bh) // buffer head is verified
| jbd2_journal_recover // failed caused by EIO
| goto failed_mount3a // skip 'sb->s_root' initialization
deactivate_locked_super
kill_block_super
generic_shutdown_super
if (sb->s_root)
// false, skip ext4_put_super->invalidate_bdev->
// invalidate_mapping_pages->mapping_evict_folio->
// filemap_release_folio->try_to_free_buffers, which
// cannot drop buffer head.
blkdev_put
blkdev_put_whole
if (atomic_dec_and_test(&bdev->bd_openers))
// false, systemd-udev happens to open the device. Then
// blkdev_flush_mapping->kill_bdev->truncate_inode_pages->
// truncate_inode_folio->truncate_cleanup_folio->
// folio_invalidate->block_invalidate_folio->
// filemap_release_folio->try_to_free_buffers will be skipped,
// dropping buffer head is missed again.
Second mount:
ext4_fill_super
ext4_load_and_init_journal
ext4_load_journal
ext4_get_journal
jbd2_journal_init_inode
journal_init_common
bh = getblk_unmovable
bh = __find_get_block // Found stale bh in last failed mounting
journal->j_sb_buffer = bh
jbd2_journal_load
load_superblock
journal_get_superblock
if (buffer_verified(bh))
// true, skip journal->j_format_version = 2, value is 0
jbd2_journal_recover
do_one_pass
next_log_block += count_tags(journal, bh)
// According to journal_tag_bytes(), 'tag_bytes' calculating is
// affected by jbd2_has_feature_csum3(), jbd2_has_feature_csum3()
// returns false because 'j->j_format_version >= 2' is not true,
// then we get wrong next_log_block. The do_one_pass may exit
// early whenoccuring non JBD2_MAGIC_NUMBER in 'next_log_block'.
The filesystem is corrupted here, journal is partially replayed, and
new journal sequence number actually is already used by last mounting.
The invalidate_bdev() can drop all buffer heads even racing with bare
reading block device(eg. systemd-udev), so we can fix it by invalidating
bdev in error handling path in __ext4_fill_super().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217171
Fixes: 25ed6e8a54 ("jbd2: enable journal clients to enable v2 checksumming")
Cc: stable@vger.kernel.org # v3.5
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230315013128.3911115-2-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3658840cd3 upstream.
Remove locking of moved directory in ext4_rename2(). We will take care
of it in VFS instead. This effectively reverts commit 0813299c58
("ext4: Fix possible corruption when moving a directory") and followup
fixes.
CC: Ted Tso <tytso@mit.edu>
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230601105830.13168-1-jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f451fd97dd ]
A recent patch added a call to ext4_error() which is problematic since
some callers of the ext4_get_group_info() function may be holding a
spinlock, whereas ext4_error() must never be called in atomic context.
This triggered a report from Syzbot: "BUG: sleeping function called from
invalid context in ext4_update_super" (see the link below).
Therefore, drop the call to ext4_error() from ext4_get_group_info(). In
the meantime use eight characters tabs instead of nine characters ones.
Reported-by: syzbot+4acc7d910e617b360859@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/00000000000070575805fdc6cdb2@google.com/
Fixes: 5354b2af34 ("ext4: allow ext4_get_group_info() to fail")
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20230614100446.14337-1-fmdefrancesco@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dea9d8f764 upstream.
ext4_xattr_block_set() relies on its caller to call dquot_initialize()
on the inode. To assure that this has happened there are WARN_ON
checks. Unfortunately, this is subject to false positives if there is
an antagonist thread which is flipping the file system at high rates
between r/o and rw. So only do the check if EXT4_XATTR_DEBUG is
enabled.
Link: https://lore.kernel.org/r/20230608044056.GA1418535@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb1f822c76 upstream.
In commit a44be64bbe ("ext4: don't clear SB_RDONLY when remounting
r/w until quota is re-enabled") we defer clearing tyhe SB_RDONLY flag
in struct super. However, we didn't defer when we checked sb_rdonly()
to determine the lazy itable init thread should be enabled, with the
next result that the lazy inode table initialization would not be
properly started. This can cause generic/231 to fail in ext4's
nojournal mode.
Fix this by moving when we decide to start or stop the lazy itable
init thread to after we clear the SB_RDONLY flag when we are
remounting the file system read/write.
Fixes a44be64bbe ("ext4: don't clear SB_RDONLY when remounting r/w until...")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230527035729.1001605-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b928dfdcb2 upstream.
If the ea_inode has been pushed out of the inode cache while there is
still a reference in the mb_cache, the lockdep subclass will not be
set on the inode, which can lead to some lockdep false positives.
Fixes: 33d201e027 ("ext4: fix lockdep warning about recursive inode locking")
Cc: stable@kernel.org
Reported-by: syzbot+d4b971e744b1f5439336@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230524034951.779531-3-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
