Commit Graph

279 Commits

Author SHA1 Message Date
Borislav Petkov 17adea01b9 amd64_edac: fix CECCs reporting
Shift error type bits properly.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-11-04 14:04:06 +01:00
Li Hong a3c4c58085 amd64_edac: fix a wrong goto clause in amd64_edac.c
In amd64_edac_init(void) in amd64_edac.c, cache_k8_northbridges() is
called before pci_register_driver. If it fails, should exit with err
directly.

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Acked-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-11-04 14:02:32 +01:00
Keith Mannthey c2494ace99 edac: i5100 fix initialization code
Allow csrows to properly initialize when the topology only has active
channels on 2 and 3.  This new check allows proper detection and
initialization in this topology.  Only checking the first mrt that
represented channels 0 and 1 is not sufficient.

I also fixed up the related debug information path.  I can submit as a 2nd
patch if needed.

Signed-off-by: Keith Mannthey <kmannth@us.ibm.com>
Acked-by: Aristeu Rozanski <aris@ruivo.org>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29 07:39:30 -07:00
Ira W. Snyder 0616fb003d edac: i5400 fix missing CONFIG_PCI define
When building without CONFIG_PCI the edac_pci_idx variable is unused,
causing a build-time warning.  Wrap the variable in #ifdef CONFIG_PCI,
just like the rest of the PCI support.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29 07:39:30 -07:00
Jeff Roberson 156edd4aaa edac: i5400 fix csrow mapping
The i5400 EDAC driver has several bugs with chip-select row computation
which most likely lead to bugs in detailed error reporting.  Attempts to
contact the authors have gone mostly unanswered so I am presenting my diff
here.  I do not subscribe to lkml and would appreciate being kept in the
cc.

The most egregious problem was miscalculating the addresses of MTR
registers after register 0 by assuming they are 32bit rather than 16.
This caused the driver to miss half of the memories.  Most motherboards
tend to have only 8 dimm slots and not 16, so this may not have been
noticed before.

Further, the row calculations multiplied the number of dimms several
times, ultimately ending up with a maximum row of 32.  The chipset only
supports 4 dimms in each of 4 channels, so csrow could not be higher than
4 unless you use a row per-rank with dual-rank dimms.  I opted to
eliminate this behavior as it is confusing to the user and the error
reporting works by slot and not rank.  This gives a much clearer view of
memory by slot and channel in /sys.

Signed-off-by: Jeff Roberson <jroberson@jroberson.net>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29 07:39:30 -07:00
Borislav Petkov 4997811e3b amd64_edac: fix DRAM base and limit extraction masks, v2
This is a proper fix as a follow-up to 66216a7 and 916d11b.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-16 18:51:22 +02:00
Linus Torvalds 624235c5b3 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, pci: Correct spelling in a comment
  x86: Simplify bound checks in the MTRR code
  x86: EDAC: carve out AMD MCE decoding logic
  initcalls: Add early_initcall() for modules
  x86: EDAC: MCE: Fix MCE decoding callback logic
2009-10-08 12:06:36 -07:00
Borislav Petkov 94baaee494 amd64_edac: beef up DRAM error injection
When injecting DRAM ECC errors (F3xBC_x8), EccVector[15:0] is a bitmask
of which bits should be error injected when written to and holds the
payload of 16-bit DRAM word when read, respectively.

Add /sysfs members to show the DRAM ECC section/word/vector.

Fail wrong injection values entered over /sysfs instead of truncating
them.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-07 16:51:28 +02:00
Borislav Petkov 66216a7a15 amd64_edac: fix DRAM base and limit extraction
On Fam10h and above, F1x[1, 0][7C:40] are DRAM Base/Limit registers
which specify the destination node of a DRAM address. Those address
boundaries are being extracted into ->dram_base[] and ->dram_limit[].
Correct the extraction masks to match the respective address bits.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-07 16:51:15 +02:00
Borislav Petkov 9d858bb10a amd64_edac: fix chip select handling
Different processor families support a different number of chip selects.
Handle this in a family-dependent way with the proper values assigned at
init time (see amd64_set_dct_base_and_mask).

Remove _DCSM_COUNT defines since they're used at one place and originate
from public documentation.

CC: Keith Mannthey <kmannth@us.ibm.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-07 16:50:50 +02:00
Keith Mannthey 2cff18c22c amd64_edac: simple fix to allow reporting of CECC errors
This allows the errors to be further decoded and mapped to csrows.
Tested with ECC debug dimms and an Rev F cpu based system.

Signed-off-by: Keith Mannthey <kmannth@us.ibm.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-07 16:49:58 +02:00
Borislav Petkov 8edc544589 amd64_edac: fix K8 intlv_sel check
The check when DRAM interleaving is enabled should be done against the
pvt->dram_IntlvSel field and not against the ->dram_limit.

Simplify first loop and fixup printk formatting while at it.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-07 16:49:43 +02:00
Borislav Petkov 72f158fe6f amd64_edac: fix interleave enable tests
The pvt->dram_IntlvEn saves the 3 "Interleave Enable" bits already
right-shifted by 8 so the check in find_mc_by_sys_addr() by shifting the
values to the left 8 bits is wrong.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-07 16:48:08 +02:00
Borislav Petkov 916d11b2b5 amd64_edac: fix DRAM base and limit address extraction
K8 DRAM base and limit addresses from F1x40 +8*i and F1x44 + 8*i, where
i in (0..7) are both bits 39-24 and therefore the shifting should be
done by 24 and not by 8.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-07 16:47:51 +02:00
Borislav Petkov 3011b20da9 amd64_edac: fix driver instance lookup table allocation
Allocate memory statically for 8-node machines max for simplicity
instead of relying on MAX_NUMNODES which is 0 on !CONFIG_NUMA builds.

Spotted by Jan Beulich.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-07 16:47:34 +02:00
Borislav Petkov 0d18b2e34b x86: EDAC: carve out AMD MCE decoding logic
This converts the MCE decoding logic into a standalone config
option which can be built-in or a module, the first one being the
default for MCEs happening early on in the boot process.

This, beyond being separated in a cleaner way, also saves RAM by
making the decoding logic modular.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <20091002133148.GD28682@aftab>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 15:42:19 +02:00
Ingo Molnar f436f8bb73 x86: EDAC: MCE: Fix MCE decoding callback logic
Make decoding of MCEs happen only on AMD hardware by registering a
non-default callback only on CPU families which support it.

While looking at the interaction of decode_mce() with the other MCE
code i also noticed a few other things and made the following
cleanups/fixes:

 - Fixed the mce_decode() weak alias - a weak alias is really not
   good here, it should be a proper callback. A weak alias will be
   overriden if a piece of code is built into the kernel - not
   good, obviously.

 - The patch initializes the callback on AMD family 10h and 11h.

 - Added the more correct fallback printk of:

	No support for human readable MCE decoding on this CPU type.
	Transcribe the message and run it through 'mcelog --ascii' to decode.

   On CPUs that dont have a decoder.

 - Made the surrounding code more readable.

Note that the callback allows us to have a default fallback -
without having to check the CPU versions during the printout
itself. When an EDAC module registers itself, it can install the
decode-print function.

(there's no unregister needed as this is core code.)

version -v2 by Borislav Petkov:

 - add K8 to the set of supported CPUs

 - always build in edac_mce_amd since we use an early_initcall now

 - fix checkpatch warnings

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <20091001141432.GA11410@aftab>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 15:42:18 +02:00
Jesper Dangaard Brouer 458e5ff13e edac: core: remove completion-wait for complete with rcu_barrier
Module edac_core.ko uses call_rcu() callbacks in edac_device.c, edac_mc.c
and edac_pci.c.

They all use a wait_for_completion() scheme, but this scheme it not 100%
safe on multiple CPUs.  See the _rcu_barrier() implementation which
explains why extra precausion is needed.

The patch adds a comment about rcu_barrier() and as a precausion calls
rcu_barrier().  A maintainer needs to look at removing the
wait_for_completion code.

[dougthompson@xmission.com: remove the wait_for_completion code]
Signed-off-by Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:21:05 -07:00
Jason Uhlenkott dd8ef1db87 edac: i3200 memory controller driver
A driver for the Intel 3200 and 3210 memory controllers.  It has only had
light testing so far, and currently makes no attempt to decode error
addresses at anything finer than csrow granularity.

Signed-off-by: Jason Uhlenkott <juhlenko@akamai.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:21:04 -07:00
Julia Lawall 30a61fff3a edac: fix resource size calculation
Use the function resource_size, which reduces the chance of introducing
off-by-one errors in calculating the resource size.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
struct resource *res;
@@

- (res->end - res->start) + 1
+ resource_size(res)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:21:04 -07:00
Ira W. Snyder b484625172 edac: mpc85xx add mpc83xx support
Add support for the Freescale MPC83xx memory controller to the existing
driver for the Freescale MPC85xx memory controller.  The only difference
between the two processors are in the CS_BNDS register parsing code, which
has been changed so it will work on both processors.

The L2 cache controller does not exist on the MPC83xx, but the OF
subsystem will not use the driver if the device is not present in the OF
device tree.

I had to change the nr_pages calculation to make the math work out.  I
checked it on my board and did the math by hand for a 64GB 85xx using 64K
pages.  In both cases, nr_pages * PAGE_SIZE comes out to the correct
value.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:21:04 -07:00
Yang Shi a014554e66 edac: mpc85xx add P2020DS support
Based on Kumar's new compatible types patch, add P2020 into MPC85xx EDAC
compatible lists so that EDAC can recognize P2020 meomry controller and L2
cache controller and export the relevant fields to sysfs.

EDAC MPC85xx DDR3 support is needed if DDR3 memory stick is installed on a
P2020DS board so that EDAC core can recognize DDR3 memory type.

Signed-off-by: Yang Shi <yang.shi@windriver.com>
Acked-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:21:04 -07:00
Anand Gadiyar 411c940385 trivial: fix typo "for for" in multiple files
trivial: fix typo "for for" in multiple files

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21 15:14:54 +02:00
Borislav Petkov 06724535f8 amd64_edac: check NB MCE bank enable on the current node properly
The old code was using smp_call_function_many which skips the current
cpu if it is in the supplied cpumask. Switch to the rdmsr_on_cpus()
interface which takes care of that.

In addition, add get_cpus_on_this_dct_cpumask helper which computes a
cpumask of all the cores on a node and thus on a DCT.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-16 13:05:46 +02:00
Wan Wei 57a30854c8 amd64_edac: Rewrite unganged mode code of f10_early_channel_count
Simplify the procedure by checking if there is any DIMM in each channel.
This patch will fix the bugs such as when there is no DIMMs under
certain node, two DIMMs in the same channel, and only one DIMM in each
channel of the node.

Borislav: minor fixups

Signed-off-by: Wan Wei <wanwei@mail.dawning.com.cn>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-16 12:42:55 +02:00
Borislav Petkov be3468e8ff amd64_edac: cleanup amd64_check_ecc_enabled
Simplify code flow and make sure return value is always valid since
further driver init depends on it. Carve out long warning string and
make code more readable. Shorten some names, while at it.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-16 12:40:38 +02:00
Andreas Herrmann 6a8126911a x86, EDAC: Provide function to return NodeId of a CPU
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
2009-09-16 11:33:40 +02:00
Ingo Molnar b9183f9b99 amd64_edac: build driver only on AMD hardware
-tip testing found the following build failure (config attached):

drivers/built-in.o: In function `amd64_check':
amd64_edac.c:(.text+0x3e9491): undefined reference to `amd_decode_nb_mce'
drivers/built-in.o: In function `amd64_init_2nd_stage':
amd64_edac.c:(.text+0x3e9b46): undefined reference to `amd_report_gart_errors'
amd64_edac.c:(.text+0x3e9b55): undefined reference to `amd_register_ecc_decoder'
drivers/built-in.o: In function `amd64_nbea_store':
amd64_edac_dbg.c:(.text+0x3ea22e): undefined reference to `amd_decode_nb_mce'
drivers/built-in.o: In function `amd64_remove_one_instance':
amd64_edac.c:(.devexit.text+0x3eea): undefined reference to `amd_report_gart_errors'
amd64_edac.c:(.devexit.text+0x3ef6): undefined reference to `amd_unregister_ecc_decoder'

the AMD EDAC code has a dependency on CONFIG_CPU_SUP_AMD facilities. The
patch below solves the problem here.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-16 11:31:57 +02:00
Borislav Petkov 53bd5fedca EDAC, AMD: decode FR MCEs
See Fam10h BKDG (31116, rev. 3.28), Table 101.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14 19:01:37 +02:00
Borislav Petkov f9350efd6f EDAC, AMD: decode load store MCEs
See Fam10h BKDG (31116, rev. 3.28), Table 100.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14 19:01:33 +02:00
Borislav Petkov 56cad2d6fb EDAC, AMD: decode bus unit MCEs
... according to Table 69, Fam10h BKDG (31116, rev. 3.28).

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14 19:01:30 +02:00
Borislav Petkov ab5535e70f EDAC, AMD: decode instruction cache MCEs
See Fam10h BKDG (31116, rev. 3.28), Table 95

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14 19:01:27 +02:00
Borislav Petkov 5196624136 EDAC, AMD: decode data cache MCEs
Those get reported in MC0_STATUS, see Table 92, F10h BKDG (31116, rev.
3.28) for more details.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14 19:01:23 +02:00
Borislav Petkov d93cc222ad EDAC, AMD: carve out decoding of MCi_STATUS ErrorCode
This is the MCE error code from the MCi_STATUS banks, bits [15:0] which
describe what type of error was encountered: GART TLB, Memory or Bus
error. The semantics of those bits are identical across all MCE banks so
decode those separately, irrespectively of MCE type.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14 19:01:20 +02:00
Borislav Petkov b69b29de65 EDAC, AMD: carve out MCi_STATUS decoding
The MCi_STATUS registers have most field definitions in common so decode
them in the general path. Do not pass ecc_type along and compute it in
__amd64_decode_bus_error instead.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14 19:01:07 +02:00
Borislav Petkov 549d042df2 x86, mce: pass mce info to EDAC for decoding
Move NB decoder along with required defines to EDAC MCE core. Add
registration routines for further decoding of the MCE info in the AMD64
EDAC module.

CC: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14 18:59:17 +02:00
Borislav Petkov ecaf5606de amd64_edac: cleanup amd64_decode_bus_error
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14 18:58:37 +02:00
Borislav Petkov b7225e4fc1 amd64_edac: remove memory and GART TLB error decoders
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14 18:58:29 +02:00
Borislav Petkov 5110dbdeab amd64_edac: cleanup/complete NB MCE decoding
* don't dump info which mcheck already does
* update to newest BKDG
* mv amd64_process_error_info -> amd64_decode_nb_mce
* shorten error struct names
* remove redundant info ptr in amd64_process_error_info
* remove unused ErrorCodeExt[19:16] (MCx_STATUS) defines

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14 18:58:25 +02:00
Borislav Petkov ef44cc4c22 amd64_edac: cleanup amd64_process_error_info
* mv amd64_error_info_regs -> err_regs

* remove redundant info ptr

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14 18:58:18 +02:00
Borislav Petkov 1c43f2e24d EDAC: beef up ErrorCodeExt error signatures
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14 18:58:14 +02:00
Borislav Petkov b70ef01016 EDAC: move MCE error descriptions to EDAC core
This is in preparation of adding AMD-specific MCE decoding functionality
to the EDAC core. The error decoding macros originate from the AMD64
EDAC driver albeit in a simplified and cleaned up version here.

While at it, add macros to generate the error description strings and
use them in the error type decoders directly which removes a bunch of
code and makes the decoding functions much more readable. Also, fix
strings and shorten macro names.

Remove superfluous htlink_msgs.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14 18:57:48 +02:00
Doug Thompson c2718348b4 amd64_edac: print debug statements only on error
Add forgotten return calls for the successful cases.

Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-08-04 12:10:06 +02:00
Doug Thompson 126b67b8d2 amd64_edac: fix ECC checking
On the good path of BIOS enabled ECC and no override, the value returned
is 1 by omission and thus is deemed failing by the probe-function.

Allow proper module initialization by clearing the retval explicitly.

Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-08-03 16:54:20 +02:00
Lu Zhihe 3d768213a6 edac: x38 fix mchbar high register addr
Intel X38 MCHBAR is a 64bits register, base from 0x48, so its higher base
is 0x4C.

Signed-off-by: Lu Zhihe <tombowfly@gmail.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: <stable@kernel.org>		[2.6.30.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 19:10:34 -07:00
Wan Wei 4afcd2dcc6 amd64_edac: read the right F2 maskoffset reg
Signed-off-by: Wan Wei <onewayforever@gmail.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-07-27 14:42:24 +02:00
Yang Shi b1cfebc923 edac: add DDR3 memory type for MPC85xx EDAC
Since some new MPC85xx SOCs support DDR3 memory now, so add DDR3 memory
type for MPC85xx EDAC.

Signed-off-by: Yang Shi <yang.shi@windriver.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-30 18:55:59 -07:00
Borislav Petkov 37da045067 amd64_edac: misc small cleanups
- cleanup debug calls
- shorten function names
- cleanup error exit paths

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-26 13:06:41 +02:00
Borislav Petkov 30c875cbc1 amd64_edac: fix ecc_enable_override handling
amd64_check_ecc_enabled() returns non-zero status when ECC
checking/correcting is disabled and this fails further loading of the
driver even when 'ecc_enable_override' boot param is used.

Fix that by clearing return status in that case.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-26 13:06:41 +02:00
Borislav Petkov 584fcff428 amd64_edac: check only ECC bit in amd64_determine_edac_cap
Checking whether the machine is using ECC enabled DRAM is done through
testing the DimmEccEn bit in the DRAM Cfg Low register (F2x[1,0]90). Do
that instead of testing all bits from the DimmEccEn upwards.

Also, remove mci->edac_cap assignment and use value returned from
amd64_determine_edac_cap().

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-26 13:06:40 +02:00