-----BEGIN PGP SIGNATURE-----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=GW48
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-fixes-20220901' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc fixes
Here are some fixes for AF_RXRPC:
(1) Fix the handling of ICMP/ICMP6 packets. This is a problem due to
rxrpc being switched to acting as a UDP tunnel, thereby allowing it to
steal the packets before they go through the UDP Rx queue. UDP
tunnels can't get ICMP/ICMP6 packets, however. This patch adds an
additional encap hook so that they can.
(2) Fix the encryption routines in rxkad to handle packets that have more
than three parts correctly. The problem is that ->nr_frags doesn't
count the initial fragment, so the sglist ends up too short.
(3) Fix a problem with destruction of the local endpoint potentially
getting repeated.
(4) Fix the calculation of the time at which to resend.
jiffies_to_usecs() gives microseconds, not nanoseconds.
(5) Fix AFS to work out when callback promises and locks expire based on
the time an op was issued rather than the time the first reply packet
arrives. We don't know how long the server took between calculating
the expiry interval and transmitting the reply.
(6) Given (5), rxrpc_get_reply_time() is no longer used, so remove it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove rxrpc_get_reply_time() as that is no longer used now that the call
issue time is used instead of the reply time.
Signed-off-by: David Howells <dhowells@redhat.com>
Because per host rate limiting has been proven problematic (side channel
attacks can be based on it), per host rate limiting of challenge acks ideally
should be per netns and turned off by default.
This is a long due followup of following commits:
083ae30828 ("tcp: enable per-socket rate limiting of all 'challenge acks'")
f2b2c582e8 ("tcp: mitigate ACK loops for connections as tcp_sock")
75ff39ccc1 ("tcp: make challenge acks less predictable")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jason Baron <jbaron@akamai.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change occurrences of "it's" that are possessive to "its"
so that they don't read as "it is".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20220829235414.17110-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ARP monitoring no longer depends on dev->last_rx or dev_trans_start(),
so delete this information.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tcp_reflect_tos option was introduced in Linux 5.10 but was still
undocumented.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a framework for running selftests.
Framework exposes devlink commands and test suite(s) to the user
to execute and query the supported tests by the driver.
Below are new entries in devlink_nl_ops
devlink_nl_cmd_selftests_show_doit/dumpit: To query the supported
selftests by the drivers.
devlink_nl_cmd_selftests_run: To execute selftests. Users can
provide a test mask for executing group tests or standalone tests.
Documentation/networking/devlink/ path is already part of MAINTAINERS &
the new files come under this path. Hence no update needed to the
MAINTAINERS
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use tunneled MGIR to obtain PSID of line card device and extend
device_info_get() op to fill up the info with that.
Example:
$ devlink dev info auxiliary/mlxsw_core.lc.0
auxiliary/mlxsw_core.lc.0:
versions:
fixed:
hw.revision 0
fw.psid MT_0000000749
running:
ini.version 4
fw 19.2010.1312
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case the line card is active, go over all possible existing
devices (gearboxes) on it and expose FW version of the flashable one.
Example:
$ devlink dev info auxiliary/mlxsw_core.lc.0
auxiliary/mlxsw_core.lc.0:
versions:
fixed:
hw.revision 0
running:
ini.version 4
fw 19.2010.1312
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement info_get() to expose HW revision of a linecard and loaded INI
version.
Example:
$ devlink dev info auxiliary/mlxsw_core.lc.0
auxiliary/mlxsw_core.lc.0:
versions:
fixed:
hw.revision 0
running:
ini.version 4
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 1033990ac5 ("sctp: implement memory accounting on tx path"),
SCTP has supported memory accounting on tx path where 'sctp_wmem' is used
by sk_wmem_schedule(). So we should fix the description for this option in
ip-sysctl.rst accordingly.
v1->v2:
- Improve the description as Marcelo suggested.
Fixes: 1033990ac5 ("sctp: implement memory accounting on tx path")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2022-07-21
This series contains updates to ice driver only.
Karol adds implementation for GNSS write; data is written to the GNSS
module through TTY device using u-blox UBX protocol.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: add write functionality for GNSS TTY
ice: add i2c write command
====================
Link: https://lore.kernel.org/r/20220721202842.3276257-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the possibility to write raw bytes to the GNSS module through the
first TTY device. This allows user to configure the module.
Create a second read-only TTY device.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The blamed commit updated the way in which VLANs are handled at the
cross-chip notifier layer and didn't update the documentation to say
that. Fix it.
Fixes: 134ef2388e ("net: dsa: add explicit support for host bridge VLANs")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Returning -EOPNOTSUPP does *NOT* mean anything special.
port_vlan_add() is actually called from 2 code paths, one is
vlan_vid_add() from 8021q module and the other is
br_switchdev_port_vlan_add() from switchdev.
The bridge has a wrapper __vlan_vid_add() which first tries via
switchdev, then if that returns -EOPNOTSUPP, tries again via the VLAN RX
filters in the 8021q module. But DSA doesn't distinguish between one
call path and the other when calling the driver's port_vlan_add(), so if
the driver returns -EOPNOTSUPP to switchdev, it also returns -EOPNOTSUPP
to the 8021q module. And the latter is a hard error.
port_fdb_add() is called from the deferred dsa_owq only, so obviously
its return code isn't propagated anywhere, and cannot be interpreted in
any way.
The return code from port_mdb_add() is propagated to the bridge, but
again, this doesn't do anything special when -EOPNOTSUPP is returned,
but rather, br_switchdev_mdb_notify() returns void.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switchdev has changed radically from its initial implementation, and the
currently provided definition is incorrect and very confusing.
Rewrite it in light of what it actually does.
Fixes: 2bedde1abb ("net: dsa: Move FDB dump implementation inside DSA")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The given definition for what VID 0 represents in the current
port_fdb_add and port_mdb_add is blatantly wrong. Delete it and explain
the concepts surrounding DSA's understanding of FDB isolation.
Fixes: c26933639b ("net: dsa: request drivers to perform FDB isolation")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This was deleted in 2017, stop documenting it.
Fixes: dc0cbff3ff ("net: dsa: Remove redundant MDB dump support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This was deleted in 2017, delete the obsolete documentation.
Fixes: c069fcd82c ("net: dsa: Remove support for bypass bridge port attributes/vlan set")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We've changed the API through which we can offload the bridge TX
forwarding process. Update the documentation in light of the removal of
2 DSA switch ops.
Fixes: b079922ba2 ("net: dsa: add a "tx_fwd_offload" argument to ->port_bridge_join")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The provided information about FDB flushing is not really up to date.
The DSA core automatically calls port_fast_age() when necessary, and
drivers should just implement that rather than hooking it to
port_bridge_leave, port_stp_state_set and others.
Fixes: 732f794c1b ("net: dsa: add port fast ageing")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These methods were added without being documented, fix that.
Fixes: fd292c189a ("net: dsa: tear down devlink port regions when tearing down the devlink port on error")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A teardown method was added to dsa_switch_ops without being documented.
Do so now.
Fixes: 5e3f847a02 ("net: dsa: Add teardown callback for drivers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support for changing the tagging protocol was added without this
operation being documented; do so now.
Fixes: 53da0ebaad ("net: dsa: allow changing the tag protocol via the "tagging" device attribute")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changes were made to the prototype of get_tag_protocol without
describing at a high level what they are about. Update the documentation
to explain that.
Fixes: 5ed4e3eb02 ("net: dsa: Pass a port to get_tag_protocol()")
Fixes: 4d776482ec ("net: dsa: Get information about stacked DSA protocol")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the blamed commit, the enum was turned into a function pointer and
also renamed. Update the documentation.
Fixes: 7b314362a2 ("net: dsa: Allow the DSA driver to indicate the tag protocol")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document the changes that took place in the DSA core in the blamed
commit.
Fixes: 0650bf52b3 ("net: dsa: be compatible with masters which unregister on shutdown")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the blamed commit we don't have register_switch_driver() and
unregister_switch_driver() anymore. Additionally, the expected
dsa_register_switch() and dsa_unregister_switch() calls aren't
documented.
Update the probing section with the details of how things are currently
done.
Fixes: 93e86b3bc8 ("net: dsa: Remove legacy probing support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces the sysctl smcr_buf_type for setting
the type of SMC-R sndbufs and RMBs.
Valid values includes:
- SMCR_PHYS_CONT_BUFS, which means use physically contiguous
buffers for better performance and is the default value.
- SMCR_VIRT_CONT_BUFS, which means use virtually contiguous
buffers in case of physically contiguous memory is scarce.
- SMCR_MIXED_BUFS, which means first try to use physically
contiguous buffers. If not available, then use virtually
contiguous buffers.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a third knob, '2', which extends the
accept_untracked_na option to learn a neighbor only if the src ip is
in the same subnet as an address configured on the interface that
received the neighbor advertisement. This is similar to the arp_accept
configuration for ipv4.
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Suggested-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In many deployments, we want the option to not learn a neighbor from
garp if the src ip is not in the same subnet as an address configured
on the interface that received the garp message. net.ipv4.arp_accept
sysctl is currently used to control creation of a neigh from a
received garp packet. This patch adds a new option '2' to
net.ipv4.arp_accept which extends option '1' by including the subnet
check.
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Suggested-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While reading sysctl_ip_dynaddr, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As discussed with Maxim add a counter for true NoPad violations.
This should help deployments catch unexpected padded records vs
just control records which always need re-encryption.
https: //lore.kernel.org/all/b111828e6ac34baad9f4e783127eba8344ac252d.camel@nvidia.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While reading cipso sysctl variables, they can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races.
Fixes: 446fda4f26 ("[NetLabel]: CIPSOv4 engine")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since optimisitic decrypt may add extra load in case of retries
require socket owner to explicitly opt-in.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The last meaningful change to this driver was made by Jon in 2011.
As much as we'd like to believe that this is because the code is
perfect the chances are nobody is using this hardware.
Because of the size of this driver there is a nontrivial maintenance
cost to keeping this code around, in the last 2 years we're averaging
more than 1 change a month. Some of which require nontrivial review
effort, see commit 877fe9d49b ("Revert "drivers/net/ethernet/neterion/vxge:
Fix a use-after-free bug in vxge-main.c"") for example.
Let's try to remove this driver. In general, IMHO, we need to
establish a clear path for shedding dead code. It will be hard
to unless we have some experience trying to delete stuff.
Link: https://lore.kernel.org/r/20220701044234.706229-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmLBZ3sTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXe2oB/wJ1T3/1tZ0+Jx7Hk84MXUTO9W05KqH
sie+yehu9A5+RNlA6/zRJBEmA4pyvOjtN0qynh3f25LfIesxUC5Tma1Epzp/Gnay
cYBrypD2iKKMNpJoiBtVVXh6Kin7+5oSLr4zxeaYcXjGfUlPIOqMnrwbGu/5ZtMH
7FL092tkQ/S1j/LDTiZk+OdjpuaM9D/7Z0t0iJ6NJb70/VEk6K3bY5XdmjLayYIJ
IBmxBbUXvBevVRDiSyMqNzA+RzQ5egrTrE3gPZZPneISN3Qu6cG+5xUqYGOxyjrJ
hzinoC48wEEHEMAeiM28AXjv9voIPvSoqeOvgZmSS0JTkfPZqirYpdzd
=9458
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.20-20220703' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-07-03
this is a pull request of 15 patches for net-next/master.
The first 2 patches are by Max Staudt and add the can327 serial CAN
driver along with a new line discipline ID.
The next patch is by me an fixes a typo in the ctucanfd driver.
The last 12 patches are by Dario Binacchi and integrate slcan CAN
serial driver better into the existing CAN driver API.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
commit ed6cd6a178 ("net, neigh: Set lower cap for neigh_managed_work rearming")
fixed a case when DELAY_PROBE_TIME is configured to 0, the processing of the
system work queue hog CPU to 100%, and further more we should introduce
a new option used by periodic probe
Signed-off-by: Yuwei Wang <wangyuweihx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is the can327 driver. It does a surprisingly good job at turning
ELM327 based OBD-II interfaces into cheap CAN interfaces for simple
homebrew projects.
Please see the included documentation for details and limitations:
Documentation/networking/device_drivers/can/can327.rst
Link: https://lore.kernel.org/all/20220618195031.10975-1-max@enpas.org
Signed-off-by: Max Staudt <max@enpas.org>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
[mkl: minor coding style improvements]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmK28FETHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXdl9B/4h4emFRjxz0BuorLEPezEHbW3ULFES
CqPOgEOj7YalEqECOYrZLf4tmQQEbWcRrKIRmBp7vVLDfSwVtY7fsjUlh0rrbpDh
zXF3uCQDkm07Sy1upBbIXFCU7OBETSbtPKWF87YOcJVWpQbkwacPiokapAnnNy/J
21Sn4dyGADnYxis5QBTu7r5sCF3rxAOBJ+2SrdOeYQ+gdJYlWxPSGL4X+87fYkOE
3b5qR/8gzkGzDEG5PDnyiYgVCprUioE4WZiY7hKmcjGQBAy2q3NOgtz8m71PMI7v
IdDapf85SeLZbO96CXpJBokUthb2HefFMJv0FWwF3uHV93kWSp8ge+VY
=TWdX
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.20-20220625' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-06-25
this is a pull request of 22 patches for net-next/master.
The first 2 patches target the xilinx driver. Srinivas Neeli's patch
adds Transmitter Delay Compensation (TDC) support, a patch by me fixes
a typo.
The next patch is by me and fixes a typo in the m_can driver.
Another patch by me allows the configuration of fixed bit rates
without need for do_set_bittiming callback.
The following 7 patches are by Vincent Mailhol and refactor the
can-dev module and Kbuild, de-inline the can_dropped_invalid_skb()
function, which has grown over the time, and drop outgoing skbs if the
controller is in listen only mode.
Max Staudt's patch fixes a reference in the networking/can.rst
documentation.
Vincent Mailhol provides 2 patches with cleanups for the etas_es58x
driver.
Conor Dooley adds bindings for the mpfs-can to the PolarFire SoC dtsi.
Another patch by me allows the configuration of fixed data bit rates
without need for do_set_data_bittiming callback.
The last 5 patches are by Frank Jungclaus. They prepare the esd_usb
driver to add support for the the CAN-USB/3 device in a later series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add per port priority support for bonding active slave re-selection during
failover. A higher number means higher priority in selection. The primary
slave still has the highest priority. This option also follows the
primary_reselect rules.
This option could only be configured via netlink.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
