[ Upstream commit dc9ceb90c4 ]
When irtoy_command fails, buf should be freed since it is allocated by
irtoy_tx, or there is a memleak.
Fixes: 4114978dcd ("media: ir_toy: prevent device from hanging during transmit")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c8a489f820 upstream.
When transmitting, infrared drivers expect an odd number of samples; iow
without a trailing space. No problems have been observed so far, so
this is just belt and braces.
Fixes: 9b6192589b ("media: lirc: implement scancode sending")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a1766a4fd8 ]
imon driver probes two USB interfaces, and at the probe of the second
interface, the driver assumes blindly that the first interface got
bound with the same imon driver. It's usually true, but it's still
possible that the first interface is bound with another driver via a
malformed descriptor. Then it may lead to a memory corruption, as
spotted by syzkaller; imon driver accesses the data from drvdata as
struct imon_context object although it's a completely different one
that was assigned by another driver.
This patch adds a sanity check -- whether the first interface is
really bound with the imon driver or not -- for avoiding the problem
above at the probe time.
Reported-by: syzbot+59875ffef5cb9c9b29e9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000a838aa0603cc74d6@google.com/
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20230922005152.163640-1-ricardo@marliere.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c592f8ab1 ]
The driver was intended from the start to be a wake-up source for the
system, however due to the absence of a suitable call to
device_set_wakeup_capable(), the device_may_wakeup() call used to decide
whether to enable the GPIO interrupt as a wake-up source would never
happen. Lookup the DT standard "wakeup-source" property and call
device_init_wakeup() to ensure the device is flagged as being wakeup
capable.
Reported-by: Matthew Lear <matthew.lear@broadcom.com>
Fixes: fd0f6851eb ("[media] rc: Add support for GPIO based IR Receiver driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29b0589a86 ]
When the ene device is detaching, function ene_remove() will
be called. But there is no function to cancel tx_sim_timer
in ene_remove(), the timer handler ene_tx_irqsim() could race
with ene_remove(). As a result, the UAF bugs could happen,
the process is shown below.
(cleanup routine) | (timer routine)
| mod_timer(&dev->tx_sim_timer, ..)
ene_remove() | (wait a time)
| ene_tx_irqsim()
| dev->hw_lock //USE
| ene_tx_sample(dev) //USE
Fix by adding del_timer_sync(&dev->tx_sim_timer) in ene_remove(),
The tx_sim_timer could stop before ene device is deallocated.
What's more, The rc_unregister_device() and del_timer_sync()
should be called first in ene_remove() and the deallocated
functions such as free_irq(), release_region() and so on
should be called behind them. Because the rc_unregister_device()
is well synchronized. Otherwise, race conditions may happen. The
situations that may lead to race conditions are shown below.
Firstly, the rx receiver is disabled with ene_rx_disable()
before rc_unregister_device() in ene_remove(), which means it
can be enabled again if a process opens /dev/lirc0 between
ene_rx_disable() and rc_unregister_device().
Secondly, the irqaction descriptor is freed by free_irq()
before the rc device is unregistered, which means irqaction
descriptor may be accessed again after it is deallocated.
Thirdly, the timer can call ene_tx_sample() that can write
to the io ports, which means the io ports could be accessed
again after they are deallocated by release_region().
Therefore, the rc_unregister_device() and del_timer_sync()
should be called first in ene_remove().
Suggested by: Sean Young <sean@mess.org>
Fixes: 9ea53b74df ("V4L/DVB: STAGING: remove lirc_ene0100 driver")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 813ceef062 ]
The function send_packet() has a race condition as follows:
func send_packet()
{
// do work
call usb_submit_urb()
mutex_unlock()
wait_for_event_interruptible() <-- lock gone
mutex_lock()
}
func vfd_write()
{
mutex_lock()
call send_packet() <- prev call is not completed
mutex_unlock()
}
When the mutex is unlocked and the function send_packet() waits for the
call to complete, vfd_write() can start another call, which leads to the
"URB submitted while active" warning in usb_submit_urb().
Fix this by removing the mutex_unlock() call in send_packet() and using
mutex_lock_interruptible().
Link: https://syzkaller.appspot.com/bug?id=e378e6a51fbe6c5cc43e34f131cc9a315ef0337e
Fixes: 21677cfc56 ("V4L/DVB: ir-core: add imon driver")
Reported-by: syzbot+0c3cb6dc05fbbdc3ad66@syzkaller.appspotmail.com
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 20b794ddce upstream.
By rounding down, the actual timeout can be lower than requested. As a
result, long spaces just below the requested timeout can be incorrectly
reported as timeout and truncated.
Fixes: 877f1a7cee ("media: rc: mceusb: allow the timeout to be configurable")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4114978dcd ]
If the IR Toy is receiving IR while a transmit is done, it may end up
hanging. We can prevent this from happening by re-entering sample mode
just before issuing the transmit command.
Link: https://github.com/bengtmartensson/HarcHardware/discussions/25
Cc: stable@vger.kernel.org
[mchehab: renamed: s/STATE_RESET/STATE_COMMAND_NO_RESP/ ]
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db264d4c66 ]
Since usb_register_dev() from imon_init_display() from imon_probe() holds
minor_rwsem while display_open() which holds driver_lock and ictx->lock is
called with minor_rwsem held from usb_open(), holding driver_lock or
ictx->lock when calling usb_register_dev() causes circular locking
dependency problem.
Since usb_deregister_dev() from imon_disconnect() holds minor_rwsem while
display_open() which holds driver_lock is called with minor_rwsem held,
holding driver_lock when calling usb_deregister_dev() also causes circular
locking dependency problem.
Sean Young explained that the problem is there are imon devices which have
two usb interfaces, even though it is one device. The probe and disconnect
function of both usb interfaces can run concurrently.
Alan Stern responded that the driver and USB cores guarantee that when an
interface is probed, both the interface and its USB device are locked.
Ditto for when the disconnect callback gets run. So concurrent probing/
disconnection of multiple interfaces on the same device is not possible.
Therefore, we don't need locks for handling race between imon_probe() and
imon_disconnect(). But we still need to handle race between display_open()
/vfd_write()/lcd_write()/display_close() and imon_disconnect(), for
disconnect event can happen while file descriptors are in use.
Since "struct file"->private_data is set by display_open(), vfd_write()/
lcd_write()/display_close() can assume that "struct file"->private_data
is not NULL even after usb_set_intfdata(interface, NULL) was called.
Replace insufficiently held driver_lock with refcount_t based management.
Add a boolean flag for recording whether imon_disconnect() was already
called. Use RCU for accessing this boolean flag and refcount_t.
Since the boolean flag for imon_disconnect() is shared, disconnect event
on either intf0 or intf1 affects both interfaces. But I assume that this
change does not matter, for usually disconnect event would not happen
while interfaces are in use.
Link: https://syzkaller.appspot.com/bug?extid=c558267ad910fc494497
Reported-by: syzbot <syzbot+c558267ad910fc494497@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+c558267ad910fc494497@syzkaller.appspotmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5ad05ecad4 upstream.
Calling udelay for than 1000us does not always yield the correct
results.
Cc: stable@vger.kernel.org
Reported-by: Михаил <vrserver1@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8fede658e7 ]
Without this, some IR will be missing mid-stream and we might decode
something which never really occurred.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2adc965c8b upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 2154be651b ("[media] redrat3: new rc-core IR transceiver device driver")
Cc: stable@vger.kernel.org # 3.0
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 16394e998c upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 66e89522af ("V4L/DVB: IR: add mceusb IR receiver driver")
Cc: stable@vger.kernel.org # 2.6.36
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 476db72e52 ]
Syzkaller reported a warning called "rcu detected stall in dummy_timer".
The error seems to be an error in mceusb_dev_recv(). In the case of
-EPROTO error, the routine immediately resubmits the URB. Instead it
should return without resubmitting URB.
Reported-by: syzbot+4d3749e9612c2cfab956@syzkaller.appspotmail.com
Signed-off-by: Rajat Asthana <rajatasthana4@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fdc8817830 upstream.
On an Intel NUC6iSYK, no IR is reported after a receive overflow.
When a receiver overflow occurs, this condition is only cleared by
reading the fifo. Make sure we read anything in the fifo.
Fixes: 28c7afb07c ("media: ite-cir: check for receive overflow")
Suggested-by: Bryan Pass <bryan.pass@gmail.com>
Tested-by: Bryan Pass <bryan.pass@gmail.com>
Cc: stable@vger.kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the IR Toy is receiving IR while a transmit is done, it may end up
hanging. We can prevent this from happening by re-entering sample mode
just before issuing the transmit command.
Link: https://github.com/bengtmartensson/HarcHardware/discussions/25
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----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=PQpb
-----END PGP SIGNATURE-----
Merge tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new sensor drivers: imx335, imx412, ov9282
- new IR transmitter driver: meson-ir-tx
- handro driver gained support for H.264 for Rockchip VDPU2
- imx gained support for i.MX8MQ
- ti-vpe has gained support for other SoC variants
- lots of cleanups, fixes, board additions and doc improvements
* tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (195 commits)
media: venus: venc: add support for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM control
media: venus: venc: Add support for intra-refresh period
media: v4l2-ctrls: Add intra-refresh period control
media: docs: ext-ctrls-codec: Document cyclic intra-refresh zero control value
media: venus: helper: do not set constrained parameters for UBWC
media: venus: venc: Fix potential null pointer dereference on pointer fmt
media: venus: hfi: fix return value check in sys_get_prop_image_version()
media: tegra-cec: Handle errors of clk_prepare_enable()
media: cec-pin: rename timer overrun variables
media: TDA1997x: report -ENOLINK after disconnecting HDMI source
media: TDA1997x: fix tda1997x_query_dv_timings() return value
media: Fix cosmetic error in TDA1997x driver
media: v4l2-dv-timings.c: fix wrong condition in two for-loops
media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
media: dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller
media: imx: imx7_mipi_csis: convert some switch cases to the default
media: imx: imx7-media-csi: Fix buffer return upon stream start failure
media: imx: imx7-media-csi: Don't set PIXEL_BIT in CSICR1
media: imx: imx7-media-csi: Set TWO_8BIT_SENSOR for >= 10-bit formats
media: dt-bindings: media: nxp,imx7-csi: Add i.MX8MM support
...
Add ability for users to specify custom u64 value (bpf_cookie) when creating
BPF link for perf_event-backed BPF programs (kprobe/uprobe, perf_event,
tracepoints).
This is useful for cases when the same BPF program is used for attaching and
processing invocation of different tracepoints/kprobes/uprobes in a generic
fashion, but such that each invocation is distinguished from each other (e.g.,
BPF program can look up additional information associated with a specific
kernel function without having to rely on function IP lookups). This enables
new use cases to be implemented simply and efficiently that previously were
possible only through code generation (and thus multiple instances of almost
identical BPF program) or compilation at runtime (BCC-style) on target hosts
(even more expensive resource-wise). For uprobes it is not even possible in
some cases to know function IP before hand (e.g., when attaching to shared
library without PID filtering, in which case base load address is not known
for a library).
This is done by storing u64 bpf_cookie in struct bpf_prog_array_item,
corresponding to each attached and run BPF program. Given cgroup BPF programs
already use two 8-byte pointers for their needs and cgroup BPF programs don't
have (yet?) support for bpf_cookie, reuse that space through union of
cgroup_storage and new bpf_cookie field.
Make it available to kprobe/tracepoint BPF programs through bpf_trace_run_ctx.
This is set by BPF_PROG_RUN_ARRAY, used by kprobe/uprobe/tracepoint BPF
program execution code, which luckily is now also split from
BPF_PROG_RUN_ARRAY_CG. This run context will be utilized by a new BPF helper
giving access to this user-provided cookie value from inside a BPF program.
Generic perf_event BPF programs will access this value from perf_event itself
through passed in BPF program context.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210815070609.987780-6-andrii@kernel.org
Turn BPF_PROG_RUN into a proper always inlined function. No functional and
performance changes are intended, but it makes it much easier to understand
what's going on with how BPF programs are actually get executed. It's more
obvious what types and callbacks are expected. Also extra () around input
parameters can be dropped, as well as `__` variable prefixes intended to avoid
naming collisions, which makes the code simpler to read and write.
This refactoring also highlighted one extra issue. BPF_PROG_RUN is both
a macro and an enum value (BPF_PROG_RUN == BPF_PROG_TEST_RUN). Turning
BPF_PROG_RUN into a function causes naming conflict compilation error. So
rename BPF_PROG_RUN into lower-case bpf_prog_run(), similar to
bpf_prog_run_xdp(), bpf_prog_run_pin_on_cpu(), etc. All existing callers of
BPF_PROG_RUN, the macro, are switched to bpf_prog_run() explicitly.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-2-andrii@kernel.org
This patch adds the driver for Amlogic Meson IR transmitter.
Some Amlogic SoCs such as A311D and T950D4 have IR transmitter
(also called blaster) controller onboard. It is capable of sending
IR signals with arbitrary carrier frequency and duty cycle.
The driver supports 2 modulation clock sources:
- xtal3 clock (xtal divided by 3)
- 1us clock
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The s_learning_mode() function is called in response to the ioctl
LIRC_SET_WIDEBAND_RECEIVER, so rename it to s_wideband_receiver().
Learning mode is when both the wideband receiver is turned on and
carrier reports are enabled.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Any timeout larger than LIRC_VALUE_MASK cannot work for the lirc uapi.
LIRC_VALUE_MASK is about 16 seconds which is more than enough.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When carrier reports are enabled, send them over loopback.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The LIRC_SET_TRANSMITTER_MASK ioctl should return the number of emitters
if an invalid list was set.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
deleted the repeated word 'the' in the comments.
Signed-off-by: lijian <lijian@yulong.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener
to another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance
(for pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require
jump labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast address
allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks
in NAPI context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP
(our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm 60GHz WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=LvtX
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener to
another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance (for
pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require jump
labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast
address allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks in NAPI
context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and
NXP (our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support"
* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
tcp: change ICSK_CA_PRIV_SIZE definition
tcp_yeah: check struct yeah size at compile time
gve: DQO: Fix off by one in gve_rx_dqo()
stmmac: intel: set PCI_D3hot in suspend
stmmac: intel: Enable PHY WOL option in EHL
net: stmmac: option to enable PHY WOL with PMT enabled
net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
net: use netdev_info in ndo_dflt_fdb_{add,del}
ptp: Set lookup cookie when creating a PTP PPS source.
net: sock: add trace for socket errors
net: sock: introduce sk_error_report
net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
net: dsa: include fdb entries pointing to bridge in the host fdb list
net: dsa: include bridge addresses which are local in the host fdb list
net: dsa: sync static FDB entries on foreign interfaces to hardware
net: dsa: install the host MDB and FDB entries in the master's RX filter
net: dsa: reference count the FDB addresses at the cross-chip notifier level
net: dsa: introduce a separate cross-chip notifier type for host FDBs
net: dsa: reference count the MDB entries at the cross-chip notifier level
...
The syscall bpf(BPF_PROG_QUERY, &attr) should use the prog_cnt field to
see how many entries user space provided and return ENOSPC if there are
more programs than that. Before this patch, this is not checked and
ENOSPC is never returned.
Note that one lirc device is limited to 64 bpf programs, and user space
I'm aware of -- ir-keytable -- always gives enough space for 64 entries
already. However, we should not copy program ids than are requested.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210623213754.632-1-sean@mess.org
Use DEVICE_ATTR_RW() helper macro instead of DEVICE_ATTR(), which is
simpler and more readable.
Due to the names of the read and write functions of the sysfs attribute is
normalized, there is a natural association.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This is an NEC remote control device shipped with some Toshiba TVs.
Signed-off-by: Alexander Voronov <avv.0@ya.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hadle errors of clk_prepare_enable() in st_rc_hardware_init() and its
callers.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of using U+2013 ('–'): EN DASH, let's just use an
hyphen there, as this was probably introduced by some cut-and-paste
from some other place.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
I came across a randconfig build failure from one driver
that only depends on CONFIG_USB_ARCH_HAS_HCD but fails when
built without CONFIG_USB:
ld: drivers/media/rc/ir_toy.o: in function `irtoy_disconnect':
ir_toy.c:(.text+0x24): undefined reference to `usb_kill_urb'
ld: ir_toy.c:(.text+0x2c): undefined reference to `usb_free_urb'
ld: ir_toy.c:(.text+0x34): undefined reference to `usb_kill_urb'
ld: ir_toy.c:(.text+0x3c): undefined reference to `usb_free_urb'
Upon a closer look, I find that a lot of the other drivers
'select USB' rather than stating 'depends on USB' as is common
for most subsystems. I also find that all except one driver
have an extra 'depends on RC_CORE' that is already implied by
the top-level 'if RC_CORE' check.
Clean up both by reducing the dependencies to the required set.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The tango platform was removed, so the driver is no longer needed.
Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Asus PN50 has 16 byte io region for the ITE8708 in its DSDT, which
causes the probe fail. So, accept larger regions.
Link: https://www.spinics.net/lists/linux-media/msg177725.html
Cc: Nikolaos Beredimas <beredim@gmail.com>
Reported-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
s/Hisilicon/HiSilicon/g.
It should use capital S, according to
https://www.hisilicon.com/en/terms-of-use.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The zte zx platform is getting removed, so this driver is no
longer needed.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add keymaps and bindings for the simple IR (NEC) remotes used with
the MeCool KII-Pro and MeCool KIII-Pro Android STB devices.
Tested-by: Drazen Spio <drazsp@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch fixes the following trivial warnings w.r.t. kernel-doc usage:
drivers/media/common/videobuf2/frame_vector.c:38: warning: Excess function parameter 'gup_flags' description in 'get_vaddr_frames'
drivers/media/dvb-core/dvb_ca_en50221.c:193: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1014: warning: expecting prototype for Wake up the DVB CA thread(). Prototype was for
dvb_ca_en50221_thread_wakeup() instead
drivers/media/dvb-core/dvb_ca_en50221.c:1023: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1081: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1112: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1327: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1411: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1426: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1582: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1693: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1743: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1772: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1830: warning: wrong kernel-doc identifier on line:
drivers/media/dvb-core/dvb_ca_en50221.c:1922: warning: wrong kernel-doc identifier on line:
drivers/media/rc/img-ir/img-ir-hw.c:628: warning: expecting prototype for img_ir_decoder_compatable(). Prototype was for
img_ir_decoder_compatible() instead
drivers/media/v4l2-core/v4l2-jpeg.c:461: warning: expecting prototype for jpeg_parse_header(). Prototype was for v4l2_jpeg_parse_header()
instead
drivers/media/platform/vsp1/vsp1_dl.c:166: warning: expecting prototype for struct vsp1_cmd_pool. Prototype was for struct vsp1_dl_cmd_pool
instead
drivers/media/platform/mtk-vpu/mtk_vpu.c:28: warning: expecting prototype for is a tiny processor controlling video hardware(). Prototype
was for INIT_TIMEOUT_MS() instead
drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c:73: warning: expecting prototype for struct vp9_fb_info. Prototype was for struct
vp9_ref_buf instead
drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c:85: warning: expecting prototype for struct vp9_fb_info. Prototype was for struct
vp9_sf_ref_fb instead
drivers/media/tuners/mt2063.c:1404: warning: expecting prototype for fLO_FractionalTerm(). Prototype was for MT2063_fLO_FractionalTerm() instead
drivers/media/tuners/mt2063.c:1465: warning: expecting prototype for CalcLO2Mult(). Prototype was for MT2063_CalcLO2Mult() instead
drivers/media/usb/pwc/pwc-dec23.c:640: warning: wrong kernel-doc identifier on line:
drivers/media/platform/exynos4-is/media-dev.c:820: warning: expecting prototype for __fimc_md_create_fimc_links(). Prototype was for
__fimc_md_create_fimc_sink_links() instead
drivers/media/i2c/s5k6aa.c:426: warning: expecting prototype for s5k6aa_configure_pixel_clock(). Prototype was for
s5k6aa_configure_pixel_clocks() instead
drivers/media/i2c/imx274.c:700: warning: wrong kernel-doc identifier on line:
drivers/media/i2c/imx274.c:735: warning: wrong kernel-doc identifier on line:
drivers/media/i2c/imx274.c:983: warning: wrong kernel-doc identifier on line:
Most are missing or mistyped function names.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Captured using a raw IR receiver. Manual linked in the remote definition
itself.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a keymap and bindings for the simple IR (NEC) remote used with
Minix 'NEO' branded Android STB devices.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
