mmap() bpf_arena right after creation, since the kernel needs to
remember the address returned from mmap. This is user_vm_start.
LLVM will generate bpf_arena_cast_user() instructions where
necessary and JIT will add upper 32-bit of user_vm_start
to such pointers.
Fix up bpf_map_mmap_sz() to compute mmap size as
map->value_size * map->max_entries for arrays and
PAGE_SIZE * map->max_entries for arena.
Don't set BTF at arena creation time, since it doesn't support it.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240308010812.89848-9-alexei.starovoitov@gmail.com
In global bpf functions recognize btf_decl_tag("arg:arena") as PTR_TO_ARENA.
Note, when the verifier sees:
__weak void foo(struct bar *p)
it recognizes 'p' as PTR_TO_MEM and 'struct bar' has to be a struct with scalars.
Hence the only way to use arena pointers in global functions is to tag them with "arg:arena".
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-7-alexei.starovoitov@gmail.com
rY = addr_space_cast(rX, 0, 1) tells the verifier that rY->type = PTR_TO_ARENA.
Any further operations on PTR_TO_ARENA register have to be in 32-bit domain.
The verifier will mark load/store through PTR_TO_ARENA with PROBE_MEM32.
JIT will generate them as kern_vm_start + 32bit_addr memory accesses.
rY = addr_space_cast(rX, 1, 0) tells the verifier that rY->type = unknown scalar.
If arena->map_flags has BPF_F_NO_USER_CONV set then convert cast_user to mov32 as well.
Otherwise JIT will convert it to:
rY = (u32)rX;
if (rY)
rY |= arena->user_vm_start & ~(u64)~0U;
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240308010812.89848-6-alexei.starovoitov@gmail.com
LLVM generates bpf_addr_space_cast instruction while translating
pointers between native (zero) address space and
__attribute__((address_space(N))).
The addr_space=1 is reserved as bpf_arena address space.
rY = addr_space_cast(rX, 0, 1) is processed by the verifier and
converted to normal 32-bit move: wX = wY
rY = addr_space_cast(rX, 1, 0) has to be converted by JIT:
aux_reg = upper_32_bits of arena->user_vm_start
aux_reg <<= 32
wX = wY // clear upper 32 bits of dst register
if (wX) // if not zero add upper bits of user_vm_start
wX |= aux_reg
JIT can do it more efficiently:
mov dst_reg32, src_reg32 // 32-bit move
shl dst_reg, 32
or dst_reg, user_vm_start
rol dst_reg, 32
xor r11, r11
test dst_reg32, dst_reg32 // check if lower 32-bit are zero
cmove r11, dst_reg // if so, set dst_reg to zero
// Intel swapped src/dst register encoding in CMOVcc
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-5-alexei.starovoitov@gmail.com
Add support for [LDX | STX | ST], PROBE_MEM32, [B | H | W | DW] instructions.
They are similar to PROBE_MEM instructions with the following differences:
- PROBE_MEM has to check that the address is in the kernel range with
src_reg + insn->off >= TASK_SIZE_MAX + PAGE_SIZE check
- PROBE_MEM doesn't support store
- PROBE_MEM32 relies on the verifier to clear upper 32-bit in the register
- PROBE_MEM32 adds 64-bit kern_vm_start address (which is stored in %r12 in the prologue)
Due to bpf_arena constructions such %r12 + %reg + off16 access is guaranteed
to be within arena virtual range, so no address check at run-time.
- PROBE_MEM32 allows STX and ST. If they fault the store is a nop.
When LDX faults the destination register is zeroed.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-4-alexei.starovoitov@gmail.com
LLVM generates rX = addr_space_cast(rY, dst_addr_space, src_addr_space)
instruction when pointers in non-zero address space are used by the bpf
program. Recognize this insn in uapi and in bpf disassembler.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-3-alexei.starovoitov@gmail.com
Introduce bpf_arena, which is a sparse shared memory region between the bpf
program and user space.
Use cases:
1. User space mmap-s bpf_arena and uses it as a traditional mmap-ed
anonymous region, like memcached or any key/value storage. The bpf
program implements an in-kernel accelerator. XDP prog can search for
a key in bpf_arena and return a value without going to user space.
2. The bpf program builds arbitrary data structures in bpf_arena (hash
tables, rb-trees, sparse arrays), while user space consumes it.
3. bpf_arena is a "heap" of memory from the bpf program's point of view.
The user space may mmap it, but bpf program will not convert pointers
to user base at run-time to improve bpf program speed.
Initially, the kernel vm_area and user vma are not populated. User space
can fault in pages within the range. While servicing a page fault,
bpf_arena logic will insert a new page into the kernel and user vmas. The
bpf program can allocate pages from that region via
bpf_arena_alloc_pages(). This kernel function will insert pages into the
kernel vm_area. The subsequent fault-in from user space will populate that
page into the user vma. The BPF_F_SEGV_ON_FAULT flag at arena creation time
can be used to prevent fault-in from user space. In such a case, if a page
is not allocated by the bpf program and not present in the kernel vm_area,
the user process will segfault. This is useful for use cases 2 and 3 above.
bpf_arena_alloc_pages() is similar to user space mmap(). It allocates pages
either at a specific address within the arena or allocates a range with the
maple tree. bpf_arena_free_pages() is analogous to munmap(), which frees
pages and removes the range from the kernel vm_area and from user process
vmas.
bpf_arena can be used as a bpf program "heap" of up to 4GB. The speed of
bpf program is more important than ease of sharing with user space. This is
use case 3. In such a case, the BPF_F_NO_USER_CONV flag is recommended.
It will tell the verifier to treat the rX = bpf_arena_cast_user(rY)
instruction as a 32-bit move wX = wY, which will improve bpf prog
performance. Otherwise, bpf_arena_cast_user is translated by JIT to
conditionally add the upper 32 bits of user vm_start (if the pointer is not
NULL) to arena pointers before they are stored into memory. This way, user
space sees them as valid 64-bit pointers.
Diff https://github.com/llvm/llvm-project/pull/84410 enables LLVM BPF
backend generate the bpf_addr_space_cast() instruction to cast pointers
between address_space(1) which is reserved for bpf_arena pointers and
default address space zero. All arena pointers in a bpf program written in
C language are tagged as __attribute__((address_space(1))). Hence, clang
provides helpful diagnostics when pointers cross address space. Libbpf and
the kernel support only address_space == 1. All other address space
identifiers are reserved.
rX = bpf_addr_space_cast(rY, /* dst_as */ 1, /* src_as */ 0) tells the
verifier that rX->type = PTR_TO_ARENA. Any further operations on
PTR_TO_ARENA register have to be in the 32-bit domain. The verifier will
mark load/store through PTR_TO_ARENA with PROBE_MEM32. JIT will generate
them as kern_vm_start + 32bit_addr memory accesses. The behavior is similar
to copy_from_kernel_nofault() except that no address checks are necessary.
The address is guaranteed to be in the 4GB range. If the page is not
present, the destination register is zeroed on read, and the operation is
ignored on write.
rX = bpf_addr_space_cast(rY, 0, 1) tells the verifier that rX->type =
unknown scalar. If arena->map_flags has BPF_F_NO_USER_CONV set, then the
verifier converts such cast instructions to mov32. Otherwise, JIT will emit
native code equivalent to:
rX = (u32)rY;
if (rY)
rX |= clear_lo32_bits(arena->user_vm_start); /* replace hi32 bits in rX */
After such conversion, the pointer becomes a valid user pointer within
bpf_arena range. The user process can access data structures created in
bpf_arena without any additional computations. For example, a linked list
built by a bpf program can be walked natively by user space.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Barret Rhoden <brho@google.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-2-alexei.starovoitov@gmail.com
Commit 420d439849 ("tpm_tis: Allow tpm_tis to be bound using DT")
added the fallback compatible "tcg,tpm-tis-mmio" to the TPM TIS driver,
but not the chip-specific "atmel,at97sc3204". However it did document
it as a valid compatible string.
Add it to tis_of_platform_match[] for consistency.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Commit 4f2a348aa3 ("arm64: dts: imx8mm-venice-gw73xx: add TPM device")
added a devicetree node for the Trusted Platform Module on certain
Gateworks boards.
The commit only used the generic "tcg,tpm_tis-spi" compatible string,
but public documentation shows that the chip is an ATTPM20P from Atmel
(nowadays Microchip):
https://trac.gateworks.com/wiki/tpm
Add the chip to the supported compatible strings of the TPM TIS SPI
driver.
For reference, a datasheet is available at:
https://ww1.microchip.com/downloads/en/DeviceDoc/ATTPM20P-Trusted-Platform-Module-TPM-2.0-SPI-Interface-Summary-Data-Sheet-DS40002082A.pdf
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@kernel.org>
Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Commit 4f2a348aa3 ("arm64: dts: imx8mm-venice-gw73xx: add TPM device")
added a devicetree node for the Trusted Platform Module on certain
Gateworks boards.
The commit only used the generic "tcg,tpm_tis-spi" compatible string,
but public documentation shows that the chip is an ATTPM20P from Atmel
(nowadays Microchip):
https://trac.gateworks.com/wiki/tpm
Add the chip to the supported compatible strings of the TPM TIS SPI
schema.
For reference, a datasheet is available at:
https://ww1.microchip.com/downloads/en/DeviceDoc/ATTPM20P-Trusted-Platform-Module-TPM-2.0-SPI-Interface-Summary-Data-Sheet-DS40002082A.pdf
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Tim Harvey <tharvey@gateworks.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
If interrupts are not activated the work struct 'free_irq_work' is not
initialized. This results in a warning splat at module shutdown.
Fix this by always initializing the work regardless of whether interrupts
are activated or not.
cc: stable@vger.kernel.org
Fixes: 481c2d1462 ("tpm,tpm_tis: Disable interrupts after 1000 unhandled IRQs")
Reported-by: Jarkko Sakkinen <jarkko@kernel.org>
Closes: https://lore.kernel.org/all/CX32RFOMJUQ0.3R4YCL9MDCB96@kernel.org/
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Change @pdev to @dev in 2 places to match the function parameters.
Correct one function name in kernel-doc comment to match the function
implementation.
This prevents these warnings:
tpm_ftpm_tee.c:217: warning: Function parameter or struct member 'dev' not described in 'ftpm_tee_probe'
tpm_ftpm_tee.c:217: warning: Excess function parameter 'pdev' description in 'ftpm_tee_probe'
tpm_ftpm_tee.c:313: warning: Function parameter or struct member 'dev' not described in 'ftpm_tee_remove'
tpm_ftpm_tee.c:313: warning: Excess function parameter 'pdev' description in 'ftpm_tee_remove'
tpm_ftpm_tee.c:348: warning: expecting prototype for ftpm_tee_shutdown(). Prototype was for ftpm_plat_tee_shutdown() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
When creating a helper to allocate and align an skb one location where
the skb data size was updated was missed. This can lead to a warning
being printed when the memory is being unmapped as it now always unmap
the maximum frame size, instead of the size after it have been
aligned.
This was correctly done for RZ/G2L but missed for R-Car.
Fixes: cfbad64706 ("ravb: Create helper to allocate skb and align it")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240308224237.496924-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 3e2f544dd8 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20240308162606.1597287-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core instead
of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Move amt driver to leverage the core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20240308162606.1597287-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The family struct is auto-generated for new families, support
use of the sock_priv_* mechanism added in commit a731132424
("genetlink: introduce per-sock family private storage").
For example if the family wants to use struct sk_buff as its
private struct (unrealistic but just for illustration), it would
add to its spec:
kernel-family:
headers: [ "linux/skbuff.h" ]
sock-priv: struct sk_buff
ynl-gen-c will declare the appropriate priv size and hook
in function prototypes to be implemented by the family.
Link: https://lore.kernel.org/r/20240308190319.2523704-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
selftests: mptcp: various improvements
In this series from Geliang, there are various improvements in MPTCP
selftests: sharing code, doing actions the same way, colours, etc.
Patch 1 prints all error messages to stdout: what was done in almost all
other MPTCP selftests. This can be now easily changed later if needed.
Patch 2 makes sure the test counter is continuous in mptcp_connect.sh.
Patch 3 aligns the messages that are printed in mptcp_connect.sh.
Patch 4 prints each test results in mptcp_sockopt.sh, similar to what we
have in the TAP output.
Patch 5 moves the different test counters to a single one in
mptcp_lib.sh, to uniform how it is used.
Patch 6 moves how titles are printed from mptcp_join.sh to the lib, to
be reused in patch 7 by all other MPTCP selftests.
Patch 8 uses the '+=' operator to append strings instead of repeating
twice the variable name: that's shorter, easier to read.
Patch 9 adds colours for the [ OK ], [SKIP], [FAIL] and INFO keywords in
all MPTCP selftests.
Patch 10 to 12 are some preparation patches for patch 13: patch 10
modifies how some 'test_fail' helpers, patch 11 moves a helper from
userspace_pm.sh to the lib, and patch 12 changes where titles are
printed in userspace_pm.sh. Patch 13 moves some duplicated helpers from
mptcp_join.sh and userspace_pm.sh to mptcp_lib.sh.
Patch 14 moves duplicated read-only variables from mptcp_join.sh and
userspace_pm.sh to mptcp_lib.sh as well.
Patch 15 uses explicit variables instead of hard-coded numbers for the
exit status.
====================
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-0-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch uses the public var KSFT_SKIP in mptcp_lib.sh instead of
ksft_skip, and drop 'ksft_skip=4' in mptcp_join.sh.
Use KSFT_PASS and KSFT_FAIL macros instead of 0 and 1 after 'exit '
and 'ret=' in all scripts:
exit 0 -> exit ${KSFT_PASS}
exit 1 -> exit ${KSFT_FAIL}
ret=0 -> ret=${KSFT_PASS}
ret=1 -> ret=${KSFT_FAIL}
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-15-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MPTCP event macros (SUB_ESTABLISHED, LISTENER_CREATED, LISTENER_CLOSED),
and the protocol family macros (AF_INET, AF_INET6) are defined in both
mptcp_join.sh and userspace_pm.sh. In order not to duplicate code, this
patch declares them all in mptcp_lib.sh with MPTCP_LIB_ prefixs.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-14-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To avoid duplicated code in different MPTCP selftests, we can add and use
helpers defined in mptcp_lib.sh.
The helper verify_listener_events() is defined both in mptcp_join.sh and
userspace_pm.sh, export it into mptcp_lib.sh and rename it with mptcp_lib_
prefix. Use this new helper in both scripts.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-13-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
verify_listener_events() helper will be exported into mptcp_lib.sh as a
public function, but print_test() is invoked in it, which is a private
function in userspace_pm.sh only. So this patch moves print_test() out of
verify_listener_events().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-12-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extract the main part of check_expected() in userspace_pm.sh to a new
function mptcp_lib_check_expected() in mptcp_lib.sh. It will be used
in both mptcp_john.sh and userspace_pm.sh. check_expected_one() is
moved into mptcp_lib.sh too as mptcp_lib_check_expected_one().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-11-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch modifies test_fail() to call mptcp_lib_pr_fail() only if there
are arguments (if [ ${#} -gt 0 ]) in userspace_pm.sh, add arguments
"unexpected type: ${type}" when calling test_fail() from test_remove().
Then mptcp_lib_pr_fail() can be used in check_expected_one() instead of
test_fail().
The same in mptcp_join.sh, calling fail_test() without argument, and adapt
this helper not to call print_fail() in this case.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-10-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To unify the output formats of all test scripts, this patch adds
four more helpers:
mptcp_lib_pr_ok()
mptcp_lib_pr_skip()
mptcp_lib_pr_fail()
mptcp_lib_pr_info()
to print out [ OK ], [SKIP], [FAIL] and 'INFO: ' with colors. Use them
in all scripts to print the "ok/skip/fail/info' using the same 'format'.
Having colors helps to quickly identify issues when looking at a long
list of output logs and results.
Note that now all print the same keywords, which was not the case
before, but it is good to uniform that.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-9-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch uses addition assignment operator (+=) to append strings
instead of duplicating the variable name in mptcp_connect.sh and
mptcp_join.sh.
This can make the statements shorter.
Note: in mptcp_connect.sh, add a local variable extra in do_transfer to
save the various extra warning logs, using += to append it. And add a
new variable tc_info to save various tc info, also using += to append it.
This can make the code more readable and prepare for the next commit.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-8-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new helper mptcp_lib_print_title(), a wrapper of
mptcp_lib_inc_test_counter() and mptcp_lib_pr_title_counter(), to
print out test counter in each test result and increase the counter.
Use this helper to print out test counters for every tests in diag.sh,
mptcp_connect.sh, mptcp_sockopt.sh, pm_netlink.sh, simult_flows.sh,
and userspace_pm.sh.
diag.sh:
01 no msk on netns creation [ ok ]
02 listen match for dport 10000 [ ok ]
03 listen match for sport 10000 [ ok ]
04 listen match for saddr and sport [ ok ]
05 all listen sockets [ ok ]
mptcp_connect.sh:
01 New MPTCP socket can be blocked via sysctl [ OK ]
02 Validating network environment with pings [ OK ]
INFO: Using loss of 0.85% delay 31 ms reorder .. with delay 7ms on ns3eth4
03 ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 69ms) [ OK ]
04 ns1 MPTCP -> ns1 (10.0.1.1:10001 ) TCP (duration 20ms) [ OK ]
05 ns1 TCP -> ns1 (10.0.1.1:10002 ) MPTCP (duration 16ms) [ OK ]
mptcp_sockopt.sh:
01 Transfer v4 [ OK ]
02 Mark v4 [ OK ]
03 Transfer v6 [ OK ]
04 Mark v6 [ OK ]
05 SOL_MPTCP sockopt v4 [ OK ]
pm_netlink.sh:
01 defaults addr list [ OK ]
02 simple add/get addr [ OK ]
03 dump addrs [ OK ]
04 simple del addr [ OK ]
05 dump addrs after del [ OK ]
simult_flows.sh:
01 balanced bwidth 7391 max 8456 [ OK ]
02 balanced bwidth - reverse direction 7403 max 8456 [ OK ]
03 balanced bwidth with unbalanced delay 7429 max 8456 [ OK ]
04 balanced bwidth with unbalanced delay - reverse ... 7485 max 8456 [ OK ]
05 unbalanced bwidth 7549 max 8456 [ OK ]
userspace_pm.sh:
01 Created network namespaces ns1, ns2 [ OK ]
INFO: Make connections
02 Established IPv4 MPTCP Connection ns2 => ns1 [ OK ]
03 Established IPv6 MPTCP Connection ns2 => ns1 [ OK ]
INFO: Announce tests
04 ADD_ADDR 10.0.2.2 (ns2) => ns1, invalid token [ OK ]
05 ADD_ADDR id:67 10.0.2.2 (ns2) => ns1, reuse port [ OK ]
Having test counters helps to quickly identify issues when looking at a
long list of output logs and results.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-7-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new variable MPTCP_LIB_TEST_FORMAT as the test title
printing format. Also add a helper mptcp_lib_print_title() to use this
format to print the test title with test counters. They are used in
mptcp_join.sh first.
Each MPTCP selftest is having subtests, and it helps to give them a
number to quickly identify them. This can be managed by mptcp_lib.sh,
reusing what has been done here. The following commit will use these
new helpers in the other tests.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-6-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Variable TEST_COUNT are used in mptcp_connect.sh and mptcp_join.sh as
test counters, which are initialized to 0, while variable test_cnt are used
in diag.sh and simult_flows.sh, which are initialized to 1. To maintain
consistency, this patch renames them all as MPTCP_LIB_TEST_COUNTER,
initializes it to 1, and exports it into mptcp_lib.sh.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-5-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only total test results are printed out in mptcp_sockopt.sh:
PASS: all packets had packet mark set
PASS: SOL_MPTCP getsockopt has expected information
PASS: TCP_INQ cmsg/ioctl -t tcp
PASS: TCP_INQ cmsg/ioctl -6 -t tcp
PASS: TCP_INQ cmsg/ioctl -r tcp
PASS: TCP_INQ cmsg/ioctl -6 -r tcp
PASS: TCP_INQ cmsg/ioctl -r tcp -t tcp
They mismatch with the test results:
ok 1 - mptcp_sockopt: mark ipv4
ok 2 - mptcp_sockopt: transfer ipv4
ok 3 - mptcp_sockopt: mark ipv6
ok 4 - mptcp_sockopt: transfer ipv6
ok 5 - mptcp_sockopt: sockopt v4
ok 6 - mptcp_sockopt: sockopt v6
ok 7 - mptcp_sockopt: TCP_INQ: -t tcp
ok 8 - mptcp_sockopt: TCP_INQ: -6 -t tcp
ok 9 - mptcp_sockopt: TCP_INQ: -r tcp
ok 10 - mptcp_sockopt: TCP_INQ: -6 -r tcp
ok 11 - mptcp_sockopt: TCP_INQ: -r tcp -t tcp
'mptcp_sockopt.sh' now display more detailed results + why (what you had
in a former patch from v6, merged here). It no longer displays 'PASS:',
because it is duplicated info now that the detailed are displayed:
Transfer v4 [ OK ]
Mark v4 [ OK ]
Transfer v6 [ OK ]
Mark v6 [ OK ]
SOL_MPTCP sockopt v4 [ OK ]
SOL_MPTCP sockopt v6 [ OK ]
TCP_INQ cmsg/ioctl -t tcp [ OK ]
TCP_INQ cmsg/ioctl -6 -t tcp [ OK ]
TCP_INQ cmsg/ioctl -r tcp [ OK ]
TCP_INQ cmsg/ioctl -6 -r tcp [ OK ]
TCP_INQ cmsg/ioctl -r tcp -t tcp [ OK ]
Also fix the TAP output:
ok 1 - mptcp_sockopt: transfer ipv4
ok 2 - mptcp_sockopt: mark ipv4
ok 3 - mptcp_sockopt: transfer ipv6
ok 4 - mptcp_sockopt: mark ipv6
ok 5 - mptcp_sockopt: sockopt v4
ok 6 - mptcp_sockopt: sockopt v6
ok 7 - mptcp_sockopt: TCP_INQ: -t tcp
ok 8 - mptcp_sockopt: TCP_INQ: -6 -t tcp
ok 9 - mptcp_sockopt: TCP_INQ: -r tcp
ok 10 - mptcp_sockopt: TCP_INQ: -6 -r tcp
ok 11 - mptcp_sockopt: TCP_INQ: -r tcp -t tcp
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-4-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The first [ OK ] in the output of mptcp_connect.sh misaligns with the
others:
New MPTCP socket can be blocked via sysctl [ OK ]
INFO: validating network environment with pings
INFO: Using loss of 0.85% delay 16 ms reorder 95% 70% with delay 4ms on
ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 184ms) [ OK ]
ns1 MPTCP -> ns1 (10.0.1.1:10001 ) TCP (duration 50ms) [ OK ]
ns1 TCP -> ns1 (10.0.1.1:10002 ) MPTCP (duration 55ms) [ OK ]
This patch aligns them by using 69 chars to display the first two lines,
and 50 chars for the other. Since 19 chars are used to display duration
time. Also print out a [ OK ] at the end of the 2nd line for consistency.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-3-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new dedicated counter 'port' instead of TEST_COUNT
to increase port numbers in mptcp_connect.sh.
This can avoid outputting discontinuous test counters.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-2-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some error messages are printed to stderr while the others are printed
to 'stdout'. As part of the unification, this patch drop "1>&2" to let
all errors messages are printed to 'stdout'.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-1-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/9684419fd714cc489a3ef36d838d3717bb6aec6d.1709886922.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- The hierarchical timer pull model
When timer wheel timers are armed they are placed into the timer wheel
of a CPU which is likely to be busy at the time of expiry. This is done
to avoid wakeups on potentially idle CPUs.
This is wrong in several aspects:
1) The heuristics to select the target CPU are wrong by
definition as the chance to get the prediction right is close
to zero.
2) Due to #1 it is possible that timers are accumulated on a
single target CPU
3) The required computation in the enqueue path is just overhead for
dubious value especially under the consideration that the vast
majority of timer wheel timers are either canceled or rearmed
before they expire.
The timer pull model avoids the above by removing the target
computation on enqueue and queueing timers always on the CPU on which
they get armed.
This is achieved by having separate wheels for CPU pinned timers and
global timers which do not care about where they expire.
As long as a CPU is busy it handles both the pinned and the global
timers which are queued on the CPU local timer wheels.
When a CPU goes idle it evaluates its own timer wheels:
- If the first expiring timer is a pinned timer, then the global
timers can be ignored as the CPU will wake up before they expire.
- If the first expiring timer is a global timer, then the expiry time
is propagated into the timer pull hierarchy and the CPU makes sure
to wake up for the first pinned timer.
The timer pull hierarchy organizes CPUs in groups of eight at the
lowest level and at the next levels groups of eight groups up to the
point where no further aggregation of groups is required, i.e. the
number of levels is log8(NR_CPUS). The magic number of eight has been
established by experimention, but can be adjusted if needed.
In each group one busy CPU acts as the migrator. It's only one CPU to
avoid lock contention on remote timer wheels.
The migrator CPU checks in its own timer wheel handling whether there
are other CPUs in the group which have gone idle and have global timers
to expire. If there are global timers to expire, the migrator locks the
remote CPU timer wheel and handles the expiry.
Depending on the group level in the hierarchy this handling can require
to walk the hierarchy downwards to the CPU level.
Special care is taken when the last CPU goes idle. At this point the
CPU is the systemwide migrator at the top of the hierarchy and it
therefore cannot delegate to the hierarchy. It needs to arm its own
timer device to expire either at the first expiring timer in the
hierarchy or at the first CPU local timer, which ever expires first.
This completely removes the overhead from the enqueue path, which is
e.g. for networking a true hotpath and trades it for a slightly more
complex idle path.
This has been in development for a couple of years and the final series
has been extensively tested by various teams from silicon vendors and
ran through extensive CI.
There have been slight performance improvements observed on network
centric workloads and an Intel team confirmed that this allows them to
power down a die completely on a mult-die socket for the first time in
a mostly idle scenario.
There is only one outstanding ~1.5% regression on a specific overloaded
netperf test which is currently investigated, but the rest is either
positive or neutral performance wise and positive on the power
management side.
- Fixes for the timekeeping interpolation code for cross-timestamps:
cross-timestamps are used for PTP to get snapshots from hardware timers
and interpolated them back to clock MONOTONIC. The changes address a
few corner cases in the interpolation code which got the math and logic
wrong.
- Simplifcation of the clocksource watchdog retry logic to automatically
adjust to handle larger systems correctly instead of having more
incomprehensible command line parameters.
- Treewide consolidation of the VDSO data structures.
- The usual small improvements and cleanups all over the place.
-----BEGIN PGP SIGNATURE-----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=iQlu
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A large set of updates and features for timers and timekeeping:
- The hierarchical timer pull model
When timer wheel timers are armed they are placed into the timer
wheel of a CPU which is likely to be busy at the time of expiry.
This is done to avoid wakeups on potentially idle CPUs.
This is wrong in several aspects:
1) The heuristics to select the target CPU are wrong by
definition as the chance to get the prediction right is
close to zero.
2) Due to #1 it is possible that timers are accumulated on
a single target CPU
3) The required computation in the enqueue path is just overhead
for dubious value especially under the consideration that the
vast majority of timer wheel timers are either canceled or
rearmed before they expire.
The timer pull model avoids the above by removing the target
computation on enqueue and queueing timers always on the CPU on
which they get armed.
This is achieved by having separate wheels for CPU pinned timers
and global timers which do not care about where they expire.
As long as a CPU is busy it handles both the pinned and the global
timers which are queued on the CPU local timer wheels.
When a CPU goes idle it evaluates its own timer wheels:
- If the first expiring timer is a pinned timer, then the global
timers can be ignored as the CPU will wake up before they
expire.
- If the first expiring timer is a global timer, then the expiry
time is propagated into the timer pull hierarchy and the CPU
makes sure to wake up for the first pinned timer.
The timer pull hierarchy organizes CPUs in groups of eight at the
lowest level and at the next levels groups of eight groups up to
the point where no further aggregation of groups is required, i.e.
the number of levels is log8(NR_CPUS). The magic number of eight
has been established by experimention, but can be adjusted if
needed.
In each group one busy CPU acts as the migrator. It's only one CPU
to avoid lock contention on remote timer wheels.
The migrator CPU checks in its own timer wheel handling whether
there are other CPUs in the group which have gone idle and have
global timers to expire. If there are global timers to expire, the
migrator locks the remote CPU timer wheel and handles the expiry.
Depending on the group level in the hierarchy this handling can
require to walk the hierarchy downwards to the CPU level.
Special care is taken when the last CPU goes idle. At this point
the CPU is the systemwide migrator at the top of the hierarchy and
it therefore cannot delegate to the hierarchy. It needs to arm its
own timer device to expire either at the first expiring timer in
the hierarchy or at the first CPU local timer, which ever expires
first.
This completely removes the overhead from the enqueue path, which
is e.g. for networking a true hotpath and trades it for a slightly
more complex idle path.
This has been in development for a couple of years and the final
series has been extensively tested by various teams from silicon
vendors and ran through extensive CI.
There have been slight performance improvements observed on network
centric workloads and an Intel team confirmed that this allows them
to power down a die completely on a mult-die socket for the first
time in a mostly idle scenario.
There is only one outstanding ~1.5% regression on a specific
overloaded netperf test which is currently investigated, but the
rest is either positive or neutral performance wise and positive on
the power management side.
- Fixes for the timekeeping interpolation code for cross-timestamps:
cross-timestamps are used for PTP to get snapshots from hardware
timers and interpolated them back to clock MONOTONIC. The changes
address a few corner cases in the interpolation code which got the
math and logic wrong.
- Simplifcation of the clocksource watchdog retry logic to
automatically adjust to handle larger systems correctly instead of
having more incomprehensible command line parameters.
- Treewide consolidation of the VDSO data structures.
- The usual small improvements and cleanups all over the place"
* tag 'timers-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
timer/migration: Fix quick check reporting late expiry
tick/sched: Fix build failure for CONFIG_NO_HZ_COMMON=n
vdso/datapage: Quick fix - use asm/page-def.h for ARM64
timers: Assert no next dyntick timer look-up while CPU is offline
tick: Assume timekeeping is correctly handed over upon last offline idle call
tick: Shut down low-res tick from dying CPU
tick: Split nohz and highres features from nohz_mode
tick: Move individual bit features to debuggable mask accesses
tick: Move got_idle_tick away from common flags
tick: Assume the tick can't be stopped in NOHZ_MODE_INACTIVE mode
tick: Move broadcast cancellation up to CPUHP_AP_TICK_DYING
tick: Move tick cancellation up to CPUHP_AP_TICK_DYING
tick: Start centralizing tick related CPU hotplug operations
tick/sched: Don't clear ts::next_tick again in can_stop_idle_tick()
tick/sched: Rename tick_nohz_stop_sched_tick() to tick_nohz_full_stop_tick()
tick: Use IS_ENABLED() whenever possible
tick/sched: Remove useless oneshot ifdeffery
tick/nohz: Remove duplicate between lowres and highres handlers
tick/nohz: Remove duplicate between tick_nohz_switch_to_nohz() and tick_setup_sched_timer()
hrtimer: Select housekeeping CPU during migration
...
The cross-timestamp mechanism which allows to correlate hardware
clocks uses clocksource pointers for describing the correlation.
That's suboptimal as drivers need to obtain the pointer, which requires
needless exports and exposing internals.
This can be completely avoided by assigning clocksource IDs and using
them for describing the correlated clock source.
This update adds clocksource IDs to all clocksources in the tree which
can be exposed to this mechanism and removes the pointer and now needless
exports.
This is separate from the timer core changes as it was provided to the
PTP folks to build further changes on top.
A related improvement for the core and the correlation handling has not
made it this time, but is expected to get ready for the next round.
-----BEGIN PGP SIGNATURE-----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=xKya
-----END PGP SIGNATURE-----
Merge tag 'timers-ptp-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource updates from Thomas Gleixner:
"Updates for timekeeping and PTP core.
The cross-timestamp mechanism which allows to correlate hardware
clocks uses clocksource pointers for describing the correlation.
That's suboptimal as drivers need to obtain the pointer, which
requires needless exports and exposing internals. This can all be
completely avoided by assigning clocksource IDs and using them for
describing the correlated clock source.
So this adds clocksource IDs to all clocksources in the tree which can
be exposed to this mechanism and removes the pointer and now needless
exports.
A related improvement for the core and the correlation handling has
not made it this time, but is expected to get ready for the next
round"
* tag 'timers-ptp-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kvmclock: Unexport kvmclock clocksource
treewide: Remove system_counterval_t.cs, which is never read
timekeeping: Evaluate system_counterval_t.cs_id instead of .cs
ptp/kvm, arm_arch_timer: Set system_counterval_t.cs_id to constant
x86/kvm, ptp/kvm: Add clocksource ID, set system_counterval_t.cs_id
x86/tsc: Add clocksource ID, set system_counterval_t.cs_id
timekeeping: Add clocksource ID to struct system_counterval_t
x86/tsc: Correct kernel-doc notation
Petr Machata says:
====================
mlxsw: Support for nexthop group statistics
ECMP is a fundamental component in L3 designs. However, it's fragile. Many
factors influence whether an ECMP group will operate as intended: hash
policy (i.e. the set of fields that contribute to ECMP hash calculation),
neighbor validity, hash seed (which might lead to polarization) or the type
of ECMP group used (hash-threshold or resilient).
At the same time, collection of statistics that would help an operator
determine that the group performs as desired, is difficult.
Support for nexthop group statistics and their HW collection has been
introduced recently. In this patch set, add HW stats collection support
to mlxsw.
This patchset progresses as follows:
- Patches #1 and #2 add nexthop IDs to notifiers.
- Patches #3 and #4 are code-shaping.
- Patches #5, #6 and #7 adjust the flow counter code.
- Patches #8 and #9 add HW nexthop counters.
- Patch #10 adjusts the HW counter code to allow sharing the same counter
for several resilient group buckets with the same NH ID.
- Patch #11 adds a selftest.
====================
Link: https://lore.kernel.org/r/cover.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add to lib.sh support for fetching NH stats, and a new library,
router_mpath_nh_lib.sh, with the common code for testing NH stats.
Use the latter from router_mpath_nh.sh and router_mpath_nh_res.sh.
The test works by sending traffic through a NH group, and checking that the
reported values correspond to what the link that ultimately receives the
traffic reports having seen.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/2a424c54062a5f1efd13b9ec5b2b0e29c6af2574.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vzxP
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull cpu core updates from Thomas Gleixner:
"A small boring set of cleanups for the SMP and CPU hotplug code"
* tag 'smp-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Remove stray semicolon
smp: Make __smp_processor_id() 0-argument macro
cpu: Mark cpu_possible_mask as __ro_after_init
kernel/cpu: Convert snprintf() to sysfs_emit()
cpu/hotplug: Delete an extraneous kernel-doc description
For resilient groups, we can reuse the same counter for all the buckets
that share the same nexthop. Keep a reference count per counter, and keep
all these counters in a per-next hop group xarray, which serves as a
NHID->counter cache. If a counter is already present for a given NHID, just
take a reference and use the same counter.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/cdd00084533fc83ac5917562f54642f008205bf3.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When hw_stats is set on a group, install nexthop counters on members of a
group.
Counter allocation request is moved from nexthop object initialization to
the update code. The previous placement made sense: when the counters are
enabled by dpipe, the counters are installed to all existing nexthops and
all nexthops created from then on get them. For the finer-grained nexthop
group statistics, this is unsuitable. The existing placement was kept for
the IPv4 and IPv6 nexthops.
Resilient group replacement emits a pre_replace notification, and then any
bucket_replace notifications if there were any replacements at all. If the
group is balanced and the nexthop composition of the replaced group didn't
change, there will be no such notifiers. Therefore hook to the pre_replace
notifier and mark all buckets for update, to un/install the counters.
When reporting deltas for resilient groups, use the nexthop ID that we
stored in a previous patch to look up to which nexthop a bucket
contributes.
Co-developed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/87495a72f187df2e5d491d02729c550d235fcc85.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The core interfaces for collecting per-NH statistics are built around
nexthops even for resilient groups. Because mlxsw models each bucket as a
nexthop, the core next hop that a given bucket contributes to needs to be
looked up. In order to be able to match the two up, we need to track
nexthop ID for members of group nexthop objects. For simplicity, do it for
all nexthop objects, not just group members.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/184ceb6b154e08f5bcf116a705b0fcb01c31895c.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The next patch will add the ability to share nexthop counters among
mlxsw nexthops backed by the same core nexthop. To have a place to store
reference count, the counter should be kept in a dedicated structure. In
this patch, introduce the structure together with the related helpers, sans
the refcount, which comes in the next patch.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/61f23fa4f8c5d7879f68dacd793d8ab7425f33c0.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlxsw_sp_nexthop_counter_disable() decays to a nop when called on a
disabled counter, but mlxsw_sp_nexthop_counter_enable() can't similarly
be called on an enabled counter. This would be useful in the following
patches. Add the missing condition.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/0cc9050e196366c1387ab5ee47f1cee8ecde9c86.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For the report_delta-like interface like a previous patch has added for
collection of NH group statistics, it's easiest to read the counter and
have the HW clear it right away. Thus, change mlxsw_sp_flow_counter_get()
to take a bool indicating whether this should be done.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/6a096ede8ee92d5041e3832242c3bbc137198aba.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
