The GIC architecture specification defines a set of registers
for redistributors and ITSes that control the sharebility and
cacheability attributes of redistributors/ITSes initiator ports
on the interconnect (GICR_[V]PROPBASER, GICR_[V]PENDBASER,
GITS_BASER<n>).
Architecturally the GIC provides a means to drive shareability
and cacheability attributes signals and related IWB/OWB/ISH barriers
but it is not mandatory for designs to wire up the corresponding
interconnect signals that control the cacheability/shareability
of transactions.
Redistributors and ITSes interconnect ports can be connected to
non-coherent interconnects that are not able to manage the
shareability/cacheability attributes; this implicitly makes
the redistributors and ITSes non-coherent observers.
So far, the GIC driver on probe executes a write to "probe" for
the redistributors and ITSes registers shareability bitfields
by writing a value (ie InnerShareable - the shareability domain the
CPUs are in) and check it back to detect whether the value sticks or
not; this hinges on a GIC programming model behaviour that predates the
current specifications, that just define shareability bits as writeable
but do not guarantee that writing certain shareability values
enable the expected behaviour for the redistributors/ITSes
memory interconnect ports.
To enable non-coherent GIC designs, introduce the "dma-noncoherent"
device tree property to allow firmware to describe redistributors and
ITSes as non-coherent observers on the memory interconnect and use the
property to force the shareability attributes to be programmed into the
redistributors and ITSes registers through the GIC quirks mechanism.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231006125929.48591-3-lpieralisi@kernel.org
In order to pave the way for more fancy quirk handling without making
more of a mess of this terrible driver, split the allocation of the
ITS descriptor (its_node) from the actual probing.
This will allow firmware-specific hooks to be added between these
two points.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231006125929.48591-4-lpieralisi@kernel.org
The GIC v3 specifications allow redistributors and ITSes interconnect
ports used to access memory to be wired up in a way that makes the
respective initiators/memory observers non-coherent.
Add the standard dma-noncoherent property to the GICv3 bindings to
allow firmware to describe the redistributors/ITSes components and
interconnect ports behaviour in system designs where the redistributors
and ITSes are not coherent with the CPU.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231006125929.48591-2-lpieralisi@kernel.org
Document RZ/G2UL (R9A07G043U) IRQC bindings. The IRQC block on RZ/G2UL SoC
is almost identical to one found on the RZ/G2L SoC the only difference
being it can support BUS_ERR_INT for which it has additional registers.
Hence new generic compatible string "renesas,r9a07g043u-irqc" is added
for RZ/G2UL SoC.
Now that we have additional interrupt for RZ/G2UL and RZ/Five SoC
interrupt-names property is added so that we can parse them based on
names.
While at it updated the example node to four spaces and added
interrupt-names property.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231006121058.13890-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Maximilian reported that surface_serial_hub serdev tx does not work during
system suspend. During system suspend, runtime PM gets disabled in
__device_suspend_late(), and tx is unable to wake-up the serial core port
device that we use to check if tx is safe to start. Johan summarized the
regression noting that serdev tx no longer always works as earlier when the
serdev device is runtime PM active.
The serdev device and the serial core controller devices are siblings of
the serial port hardware device. The runtime PM usage count from serdev
device does not propagate to the serial core device siblings, it only
propagates to the parent.
In addition to the tx issue for suspend, testing for the serial core port
device can cause an unnecessary delay in enabling tx while waiting for the
serial core port device to wake-up. The serial core port device wake-up is
only needed to flush pending tx when the serial port hardware device was
in runtime PM suspended state.
To fix the regression, we need to check the runtime PM state of the parent
serial port hardware device for tx instead of the serial core port device.
As the serial port device drivers may or may not implement runtime PM, we
need to also add a check for pm_runtime_enabled().
Reported-by: Maximilian Luz <luzmaximilian@gmail.com>
Cc: stable <stable@kernel.org>
Fixes: 84a9582fd2 ("serial: core: Start managing serial controllers to enable runtime PM")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231005075644.25936-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If this check ever triggers
static int uart_get_info(struct tty_port *port, struct serial_struct *retinfo)
{
uport = uart_port_check(state);
if (!uport)
goto out;
then all those sysfs users will print stack contents to userspace.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Link: https://lore.kernel.org/r/967b9ef1-fb36-48bf-9e6a-1b99af24c052@p183
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document support for the Serial Communication Interface with FIFO (SCIF)
available in the Renesas RZ/G3S (R9A08G045) SoC. SCIF interface in
Renesas RZ/G3S is similar to the one available in RZ/G2L.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231006103959.197485-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The regular expression pattern for matching serial node children should
accept only nodes starting and ending with the set of words: bluetooth,
gnss, gps or mcu. Add missing brackets to enforce such matching.
Fixes: 0c559bc8ab ("dt-bindings: serial: restrict possible child node names")
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Closes: https://lore.kernel.org/all/20231004170021.36b32465@aktux/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231005093247.128166-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/2023100549-sixth-anger-ac34@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/2023100546-humbly-prologue-e58c@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin reported that on his local dev machine the test_tc_chain_mixed() fails as
"test_tc_chain_mixed:FAIL:seen_tc5 unexpected seen_tc5: actual 1 != expected 0"
and others occasionally, too.
However, when running in a more isolated setup (qemu in particular), it works fine
for him. The reason is that there is a small race-window where seen_tc* could turn
into true for various test cases when there is background traffic, e.g. after the
asserts they often get reset. In such case when subsequent detach takes place,
unrelated background traffic could have already flipped the bool to true beforehand.
Add a small helper tc_skel_reset_all_seen() to reset all bools before we do the ping
test. At this point, everything is set up as expected and therefore no race can occur.
All tc_{opts,links} tests continue to pass after this change.
Reported-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231006220655.1653-7-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Simplify __assert_mprog_count() to remove the -ENOENT corner case as the
bpf_prog_query() now returns 0 when no bpf_mprog is attached. This also
allows to convert a few test cases from using raw __assert_mprog_count()
over to plain assert_mprog_count() helper.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231006220655.1653-5-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add a new test case which performs double query of the bpf_mprog through
libbpf API, but also via raw bpf(2) syscall. This is testing to gather
first the count and then in a subsequent probe the full information with
the program array without clearing passed structs in between.
# ./vmtest.sh -- ./test_progs -t tc_opts
[...]
./test_progs -t tc_opts
[ 1.398818] tsc: Refined TSC clocksource calibration: 3407.999 MHz
[ 1.400263] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd336761, max_idle_ns: 440795243819 ns
[ 1.402734] clocksource: Switched to clocksource tsc
[ 1.426639] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.428112] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
#252 tc_opts_after:OK
#253 tc_opts_append:OK
#254 tc_opts_basic:OK
#255 tc_opts_before:OK
#256 tc_opts_chain_classic:OK
#257 tc_opts_chain_mixed:OK
#258 tc_opts_delete_empty:OK
#259 tc_opts_demixed:OK
#260 tc_opts_detach:OK
#261 tc_opts_detach_after:OK
#262 tc_opts_detach_before:OK
#263 tc_opts_dev_cleanup:OK
#264 tc_opts_invalid:OK
#265 tc_opts_max:OK
#266 tc_opts_mixed:OK
#267 tc_opts_prepend:OK
#268 tc_opts_query:OK <--- (new test)
#269 tc_opts_replace:OK
#270 tc_opts_revision:OK
Summary: 19/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231006220655.1653-4-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The recently added tcx attachment extended the BPF UAPI for attaching and
detaching by a couple of fields. Those fields are currently only supported
for tcx, other types like cgroups and flow dissector silently ignore the
new fields except for the new flags.
This is problematic once we extend bpf_mprog to older attachment types, since
it's hard to figure out whether the syscall really was successful if the
kernel silently ignores non-zero values.
Explicitly reject non-zero fields relevant to bpf_mprog for attachment types
which don't use the latter yet.
Fixes: e420bed025 ("bpf: Add fd-based tcx multi-prog infra with link support")
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231006220655.1653-3-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Improve consistency for bpf_mprog_query() API and let the latter also handle
a NULL entry as can be the case for tcx. Instead of returning -ENOENT, we
copy a count of 0 and revision of 1 to user space, so that this can be fed
into a subsequent bpf_mprog_attach() call as expected_revision. A BPF self-
test as part of this series has been added to assert this case.
Suggested-by: Lorenz Bauer <lmb@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231006220655.1653-2-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
While working on the ebpf-go [0] library integration for bpf_mprog and tcx,
Lorenz noticed that two subsequent BPF_PROG_QUERY requests currently fail. A
typical workflow is to first gather the bpf_mprog count without passing program/
link arrays, followed by the second request which contains the actual array
pointers.
The initial call populates count and revision fields. The second call gets
rejected due to a BPF_PROG_QUERY_LAST_FIELD bug which should point to
query.revision instead of query.link_attach_flags since the former is really
the last member.
It was not noticed in libbpf as bpf_prog_query_opts() always calls bpf(2) with
an on-stack bpf_attr that is memset() each time (and therefore query.revision
was reset to zero).
[0] https://ebpf-go.dev
Fixes: e420bed025 ("bpf: Add fd-based tcx multi-prog infra with link support")
Reported-by: Lorenz Bauer <lmb@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231006220655.1653-1-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The ravb_stop() should call cancel_work_sync(). Otherwise,
ravb_tx_timeout_work() is possible to use the freed priv after
ravb_remove() was called like below:
CPU0 CPU1
ravb_tx_timeout()
ravb_remove()
unregister_netdev()
free_netdev(ndev)
// free priv
ravb_tx_timeout_work()
// use priv
unregister_netdev() will call .ndo_stop() so that ravb_stop() is
called. And, after phy_stop() is called, netif_carrier_off()
is also called. So that .ndo_tx_timeout() will not be called
after phy_stop().
Fixes: c156633f13 ("Renesas Ethernet AVB driver proper")
Reported-by: Zheng Wang <zyytlz.wz@163.com>
Closes: https://lore.kernel.org/netdev/20230725030026.1664873-1-zyytlz.wz@163.com/
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20231005011201.14368-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In ravb_remove(), dma_free_coherent() should be call after
unregister_netdev(). Otherwise, this controller is possible to use
the freed buffer.
Fixes: c156633f13 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20231005011201.14368-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devlink health dump get callback should take devlink lock as any other
devlink callback. Otherwise, since devlink_mutex was removed, this
callback is not protected from a race of the reporter being destroyed
while handling the callback.
Add devlink lock to the callback and to any call for
devlink_health_do_dump(). This should be safe as non of the drivers dump
callback implementation takes devlink lock.
As devlink lock is added to any callback of dump, the reporter dump_lock
is now redundant and can be removed.
Fixes: d3efc2a6a6 ("net: devlink: remove devlink_mutex")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/1696510216-189379-1-git-send-email-moshe@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NWf+
-----END PGP SIGNATURE-----
Merge tag 'block-6.6-2023-10-06' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Just two minor fixes, for nbd and md"
* tag 'block-6.6-2023-10-06' of git://git.kernel.dk/linux:
nbd: don't call blk_mark_disk_dead nbd_clear_sock_ioctl
md/raid5: release batch_last before waiting for another stripe_head
-----BEGIN PGP SIGNATURE-----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=t9If
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.6-2023-10-06' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- syzbot report on a crash on 32-bit arm with highmem, and went digging
to check for potentially similar issues and found one more (me)
- Fix a syzbot report with PROVE_LOCKING=y and setting up the ring in a
disabled state (me)
- Fix for race with CPU hotplut and io-wq init (Jeff)
* tag 'io_uring-6.6-2023-10-06' of git://git.kernel.dk/linux:
io-wq: fully initialize wqe before calling cpuhp_state_add_instance_nocalls()
io_uring: don't allow IORING_SETUP_NO_MMAP rings on highmem pages
io_uring: ensure io_lockdep_assert_cq_locked() handles disabled rings
io_uring/kbuf: don't allow registered buffer rings on highmem pages
The DSU PMU allows monitoring performance events in the DSU cluster,
which is done by configuring and reading back values from the DSU PMU
system registers. However, for write-access to be allowed by ELs lower
than EL3, the EL3 firmware needs to update the setting on the ACTLR3_EL3
register, as it is disallowed by default.
That configuration is not done on the firmware used by the MT8195 SoC,
as a consequence, booting a MT8195-based machine like
mt8195-cherry-tomato-r2 with CONFIG_ARM_DSU_PMU enabled hangs the kernel
just as it writes to the CLUSTERPMOVSCLR_EL1 register, since the
instruction faults to EL3, and BL31 apparently just re-runs the
instruction over and over.
Mark the DSU PMU node in the Devicetree with status "fail", as the
machine doesn't have a suitable firmware to make use of it from the
kernel, and allowing its driver to probe would hang the kernel.
Fixes: 37f2582883 ("arm64: dts: Add mediatek SoC mt8195 and evaluation board")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230720200753.322133-1-nfraprado@collabora.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-5-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dtbs_check throws a warning at t-phy nodes:
Warning (unit_address_vs_reg): /t-phy@1a243000: node has a unit name, but no reg or ranges property
Warning (unit_address_vs_reg): /soc/t-phy@11c00000: node has a unit name, but no reg or ranges property
The ranges is empty thus removing the `@1a243000`, `@11c00000` from
the node name.
Fixes: 6029cae696 ("arm64: dts: mediatek: mt7622: harmonize node names and compatibles")
Fixes: 918aed7abd ("arm64: dts: mt7986: add pcie related device nodes")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230814093931.9298-2-eugen.hristev@collabora.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-4-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The dts file of the MediaTek MT8195 demo board has been updated to include
new reserved memory regions.
These reserved memory regions are:
- SCP
- VPU,
- Sound DMA
- APU.
These regions are defined with the "shared-dma-pool" compatible property.
In addition, the existing reserved memory regions have been reordered by
their addresses to improve readability and maintainability of the DTS
file.
Cc: stable@vger.kernel.org # 6.1, 6.4, 6.5
Fixes: e4a4175201 ("arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230905034511.11232-2-macpaul.lin@mediatek.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-3-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I am a top reviewer mainly for MediaTek SoC related patches in most
subsystems and I've also been upstreaming both improvements, fixes
and new drivers and devicetrees when required.
The MediaTek scene saw a generous increase in number of patches that
are sent to the lists every week, increasing the amount of required
efforts to maintain the MTK bits overall, and we will possibly see
even more of that.
For this reason, and also because of suggestions and encouragement
coming from the community, I'm stepping up to be a co-maintainer of
MediaTek SoCs support.
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20230929082009.71843-1-angelogioacchino.delregno@collabora.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-1-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The correct name of this chip is MXC4005, not MX4005. This is confirmed
both by the manufacturer website and by the title of the original commit,
which added other MXCxxxx devices as well but only this one misses a "c" in
the compatible string.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Fixes: d9bf5d37fd ("dt-bindings:trivial-devices: Add memsic,mxc4005/mxc6255/mxc6655 entries")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231004-mxc4005-device-tree-support-v1-1-e7c0faea72e4@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
The 'msi' child node schema is missing constraints on additional properties.
It turns out it is incomplete and properties for it are documented in the
parent node by mistake. Move the reference to msi-controller.yaml and
the custom properties to the 'msi' node. Adding 'unevaluatedProperties'
ensures all the properties in the 'msi' node are documented.
With the schema corrected, a minimal interrupt controller node is needed
to properly decode the interrupt properties since the example has
multiple interrupt parents.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Fixes: 905b986d09 ("dt-bindings: pci: Convert iProc PCIe to YAML")
Link: https://lore.kernel.org/r/20230926155613.33904-3-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Drop the unnecessary listing of properties already defined in
pci-bus.yaml. Unless there are additional constraints, it is not
necessary.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230926155351.31117-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The example's indentation is off. While fixing this, the 'bus' node
is unnecessary and can be dropped. It is also preferred to split up
unrelated examples to their own entries.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230926155351.31117-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230925212803.1976803-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
A bus schema based on simple-pm-bus shouldn't define how many 'reg' entries
a child device has. That is a property of the device. Drop the 'reg' entry.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230925212639.1975002-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
On i.MX8MQ the MIPI CSI block does have an associated power-domain, but
the CSI bridge does not.
Remove the power-domains requirement from the i.MX8MQ CSI bridge
to fix the following schema warning:
imx8mq-librem5-r4.dtb: csi@30a90000: 'power-domains' is a required property
from schema $id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml#
Fixes: de65538684 ("media: dt-bindings: media: imx7-csi: Document i.MX8M power-domains property")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231004201105.2323758-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----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=6O20
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix a qcom register offset that broke IPQ8074 PCIe controller
enumeration (Sricharan Ramabadhran)
- Handle interrupt parsing failures when creating a device tree node to
avoid using uninitialized data (Lizhi Hou)
- Clean up if adding PCI device node fails when creating a device tree
node to avoid a memory leak (Lizhi Hou)
- If a link is down, mark all downstream devices as "disconnected" so
we don't wait for them on resume (Mika Westerberg)
* tag 'pci-v6.6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/PM: Mark devices disconnected if upstream PCIe link is down on resume
PCI: of: Destroy changeset when adding PCI device node fails
PCI: of_property: Handle interrupt parsing failures
PCI: qcom: Fix IPQ8074 enumeration
Bug fixes, build warning fixes and DMI quirk additions for pdx86 for 6.6.
The following is an automated git shortlog grouped by driver:
hp-bioscfg:
- Fix reference leak
hp-wmi:
- Mark driver struct with __refdata to prevent section mismatch warning
platform/mellanox:
- tmfifo: fix kernel-doc warnings
platform/x86/intel/ifs:
- release cpus_read_lock()
think-lmi:
- Fix reference leak
touchscreen_dmi:
- Add info for the Positivo C4128B
- Add info for the BUSH Bush Windows tablet
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmUgKX0UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wF7gf+P4RmnOlZE/RyQ5nlhhWPyP9mY2ye
CsL1qZ5/lJNy99YaOo0LE4ZAptavXPjMhdgd68Dr7K8Gu+b74VweKmT3pP4ZtxzI
4RiDJD43SMGUMTNBaZtIje6o8l4YsjW4ckgcnA7Z5Eb0qNqcBNSQ0brlonVtSy0S
7s9ks5sG0KWVWLTa1h6S4ATRWaTUCwKpxiCeZ51eL5o0i8ggkSe0xOp117tMZ7P2
au0tO5uUh/rtnaJFu+zVOF1liXvFw5rBw/fr8tGhiWO26RLZ+qc9leOpmowEkcTM
StVuKowjuEMebZLsg7dRyTxW6g+ioEnnt89ofnw9JFmZA6TiRVFlPBGgkA==
=4Jkl
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Bug fixes, build warning fixes and DMI quirk additions"
* tag 'platform-drivers-x86-v6.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: hp-wmi:: Mark driver struct with __refdata to prevent section mismatch warning
platform/x86: touchscreen_dmi: Add info for the Positivo C4128B
platform/x86: touchscreen_dmi: Add info for the BUSH Bush Windows tablet
platform/mellanox: tmfifo: fix kernel-doc warnings
platform/x86/intel/ifs: release cpus_read_lock()
platform/x86: hp-bioscfg: Fix reference leak
platform/x86: think-lmi: Fix reference leak
-----BEGIN PGP SIGNATURE-----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=/WDi
-----END PGP SIGNATURE-----
Merge tag 'for-6.6-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- reject unknown mount options
- adjust transaction abort error message level
- fix one more build warning with -Wmaybe-uninitialized
- proper error handling in several COW-related cases
* tag 'for-6.6-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: error out when reallocating block for defrag using a stale transaction
btrfs: error when COWing block from a root that is being deleted
btrfs: error out when COWing block using a stale transaction
btrfs: always print transaction aborted messages with an error level
btrfs: reject unknown mount options early
btrfs: fix some -Wmaybe-uninitialized warnings in ioctl.c
Note last minute rebase to fix up a stale Fixes tag. All patches have been
in Linux-next for some time.
adi,ad3552r
- Fix swapped device IDs for the two parts that are supported.
adi,ad7192
- Use the right reference voltage source.
adi,ad7292
- Fix additionalProperties to be false, not true.
adi,ad74413
- Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
adi,admv1013
- Fix up some corner cases for the mixer vgate register value.
bosch,bmp280
- Fix a null pointer dereference caused by a wrong boolean operator.
bosch,bno055
- Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
freescale,imx8eqxp
- Fix some wrong register addresses.
google,cros_ec
- Fix a use after free if very badly timed buffer disable occurs by
holding the device in buffered mode.
infineon,dps310
- Expand a timeout so we don't hit it on working parts.
meas,m5611
- Allow for a ROM CRC of 0 as it is a valid value and there are devices
out there where it happens.
murata,irsd200
- Make sure the buffer used to build up the scan is large enough to take
the timestamp.
rohm,bu27010 binding
- Add a missing required vdd-supply
vishay,vcnl4000
- Don't power down chip in wrong place.
-----BEGIN PGP SIGNATURE-----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=+NT7
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
1st set of IIO fixes for 6.6
Note last minute rebase to fix up a stale Fixes tag. All patches have been
in Linux-next for some time.
adi,ad3552r
- Fix swapped device IDs for the two parts that are supported.
adi,ad7192
- Use the right reference voltage source.
adi,ad7292
- Fix additionalProperties to be false, not true.
adi,ad74413
- Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
adi,admv1013
- Fix up some corner cases for the mixer vgate register value.
bosch,bmp280
- Fix a null pointer dereference caused by a wrong boolean operator.
bosch,bno055
- Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
freescale,imx8eqxp
- Fix some wrong register addresses.
google,cros_ec
- Fix a use after free if very badly timed buffer disable occurs by
holding the device in buffered mode.
infineon,dps310
- Expand a timeout so we don't hit it on working parts.
meas,m5611
- Allow for a ROM CRC of 0 as it is a valid value and there are devices
out there where it happens.
murata,irsd200
- Make sure the buffer used to build up the scan is large enough to take
the timestamp.
rohm,bu27010 binding
- Add a missing required vdd-supply
vishay,vcnl4000
- Don't power down chip in wrong place.
* tag 'iio-fixes-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
iio: adc: ad7192: Correct reference voltage
iio: light: vcnl4000: Don't power on/off chip in config
iio: addac: Kconfig: update ad74413r selections
iio: pressure: dps310: Adjust Timeout Settings
iio: imu: bno055: Fix missing Kconfig dependencies
iio: adc: imx8qxp: Fix address for command buffer registers
iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
iio: admv1013: add mixer_vgate corner cases
iio: pressure: bmp280: Fix NULL pointer exception
iio: dac: ad3552r: Correct device IDs
- Workaround for Cortex-A520 erratum #2966298
- Fix typo in Arm CMN PMU driver that breaks counter overflow handling
- Fix timer handling across idle for Qualcomm custom CPUs
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmUeiyIQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNMQjCAC5LDnQSuRJNea3eOjhT1Q4/mffiahbcDN0
+xdXgmDwbrXDG6uDlvFeqhocvd8g+mF8Z+NiLuYL1MLnm+dUrs2UWQ5n/XRIJ7vw
VxH8PAai4zGvqEUMXizJi0OuOusCmGfRdZcbR+m6drLHeHGlqwnZha+/7C9xDN2m
fqSzrtxn2lJsdP2kvYkHw2u7xDZK8rNu+KsEl6VBTBEfGs6wZbTz3S9+PRRYnhCi
4qh6X1rWiIZa1+bHWC2xnzCHU9Mfs9cOZs4ZF7RMisCLzH44fIgyCUMVYC+VjaFO
G4cIjDJ8meAjmph8nXYEpKJLPrgE+75RodVpsB7cekwOhqYYUgvC
=FWzt
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A typo fix for a PMU driver, a workround for a side-channel erratum on
Cortex-A520 and a fix for the local timer save/restore when using ACPI
with Qualcomm's custom CPUs:
- Workaround for Cortex-A520 erratum #2966298
- Fix typo in Arm CMN PMU driver that breaks counter overflow handling
- Fix timer handling across idle for Qualcomm custom CPUs"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
cpuidle, ACPI: Evaluate LPI arch_flags for broadcast timer
arm64: errata: Add Cortex-A520 speculative unprivileged load workaround
arm64: Add Cortex-A520 CPU part definition
perf/arm-cmn: Fix the unhandled overflow status of counter 4 to 7
i915:
- Fix for OpenGL CTS regression on Compute Shaders
- Fix for default engines initialization
- Fix TLB invalidation for Multi-GT devices
amdgpu:
- Add missing unique_id for GC 11.0.3
- Fix memory leak in FRU error path
- Fix PCIe link reporting on some SMU 11 parts
- Fix ACPI _PR3 detection
- Fix DISPCLK WDIVIDER handling in OTG code
tests:
- Fix kunit release
panel:
- panel-orientation: Add quirk for One Mix 25
nouveau:
- Report IB limit via getparams
- Replace some magic numbers with constants
- small clean up
-----BEGIN PGP SIGNATURE-----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=g4ze
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2023-10-06' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular weekly pull, all seems pretty normal, i915 and amdgpu mostly.
There is one small new uAPI addition for nouveau but getting it in now
avoids a bunch of userspace dances, and it's for a userspace that
hasn't yet released, so should have no side effects.
i915:
- Fix for OpenGL CTS regression on Compute Shaders
- Fix for default engines initialization
- Fix TLB invalidation for Multi-GT devices
amdgpu:
- Add missing unique_id for GC 11.0.3
- Fix memory leak in FRU error path
- Fix PCIe link reporting on some SMU 11 parts
- Fix ACPI _PR3 detection
- Fix DISPCLK WDIVIDER handling in OTG code
tests:
- Fix kunit release
panel:
- panel-orientation: Add quirk for One Mix 25
nouveau:
- Report IB limit via getparams
- Replace some magic numbers with constants
- small clean up"
* tag 'drm-fixes-2023-10-06' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: apply edge-case DISPCLK WDIVIDER changes to master OTG pipes only
drm/amd: Fix detection of _PR3 on the PCIe root port
drm/amd: Fix logic error in sienna_cichlid_update_pcie_parameters()
drm/amdgpu: Fix a memory leak
drm/amd/pm: add unique_id for gc 11.0.3
drm/i915: Invalidate the TLBs on each GT
drm/i915: Register engines early to avoid type confusion
drm/i915: Don't set PIPE_CONTROL_FLUSH_L3 for aux inval
drm/nouveau: exec: report max pushs through getparam
drm/nouveau: chan: use channel class definitions
drm/nouveau: chan: use struct nvif_mclass
drm: panel-orientation-quirks: Add quirk for One Mix 2S
drm/tests: Fix kunit_release_action ctx argument
hidpp_connect_event() has *four* time-of-check vs time-of-use (TOCTOU)
races when it races with itself.
hidpp_connect_event() primarily runs from a workqueue but it also runs
on probe() and if a "device-connected" packet is received by the hw
when the thread running hidpp_connect_event() from probe() is waiting on
the hw, then a second thread running hidpp_connect_event() will be
started from the workqueue.
This opens the following races (note the below code is simplified):
1. Retrieving + printing the protocol (harmless race):
if (!hidpp->protocol_major) {
hidpp_root_get_protocol_version()
hidpp->protocol_major = response.rap.params[0];
}
We can actually see this race hit in the dmesg in the abrt output
attached to rhbz#2227968:
[ 3064.624215] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected.
[ 3064.658184] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected.
Testing with extra logging added has shown that after this the 2 threads
take turn grabbing the hw access mutex (send_mutex) so they ping-pong
through all the other TOCTOU cases managing to hit all of them:
2. Updating the name to the HIDPP name (harmless race):
if (hidpp->name == hdev->name) {
...
hidpp->name = new_name;
}
3. Initializing the power_supply class for the battery (problematic!):
hidpp_initialize_battery()
{
if (hidpp->battery.ps)
return 0;
probe_battery(); /* Blocks, threads take turns executing this */
hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
&hidpp->battery.desc, cfg);
}
4. Creating delayed input_device (potentially problematic):
if (hidpp->delayed_input)
return;
hidpp->delayed_input = hidpp_allocate_input(hdev);
The really big problem here is 3. Hitting the race leads to the following
sequence:
hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
&hidpp->battery.desc, cfg);
...
hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
&hidpp->battery.desc, cfg);
So now we have registered 2 power supplies for the same battery,
which looks a bit weird from userspace's pov but this is not even
the really big problem.
Notice how:
1. This is all devm-maganaged
2. The hidpp->battery.desc struct is shared between the 2 power supplies
3. hidpp->battery.desc.properties points to the result from the second
devm_kmemdup()
This causes a use after free scenario on USB disconnect of the receiver:
1. The last registered power supply class device gets unregistered
2. The memory from the last devm_kmemdup() call gets freed,
hidpp->battery.desc.properties now points to freed memory
3. The first registered power supply class device gets unregistered,
this involves sending a remove uevent to userspace which invokes
power_supply_uevent() to fill the uevent data
4. power_supply_uevent() uses hidpp->battery.desc.properties which
now points to freed memory leading to backtraces like this one:
Sep 22 20:01:35 eric kernel: BUG: unable to handle page fault for address: ffffb2140e017f08
...
Sep 22 20:01:35 eric kernel: Workqueue: usb_hub_wq hub_event
Sep 22 20:01:35 eric kernel: RIP: 0010:power_supply_uevent+0xee/0x1d0
...
Sep 22 20:01:35 eric kernel: ? asm_exc_page_fault+0x26/0x30
Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0xee/0x1d0
Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0x10d/0x1d0
Sep 22 20:01:35 eric kernel: dev_uevent+0x10f/0x2d0
Sep 22 20:01:35 eric kernel: kobject_uevent_env+0x291/0x680
Sep 22 20:01:35 eric kernel: power_supply_unregister+0x8e/0xa0
Sep 22 20:01:35 eric kernel: release_nodes+0x3d/0xb0
Sep 22 20:01:35 eric kernel: devres_release_group+0xfc/0x130
Sep 22 20:01:35 eric kernel: hid_device_remove+0x56/0xa0
Sep 22 20:01:35 eric kernel: device_release_driver_internal+0x19f/0x200
Sep 22 20:01:35 eric kernel: bus_remove_device+0xc6/0x130
Sep 22 20:01:35 eric kernel: device_del+0x15c/0x3f0
Sep 22 20:01:35 eric kernel: ? __queue_work+0x1df/0x440
Sep 22 20:01:35 eric kernel: hid_destroy_device+0x4b/0x60
Sep 22 20:01:35 eric kernel: logi_dj_remove+0x9a/0x100 [hid_logitech_dj 5c91534a0ead2b65e04dd799a0437e3b99b21bc4]
Sep 22 20:01:35 eric kernel: hid_device_remove+0x44/0xa0
Sep 22 20:01:35 eric kernel: device_release_driver_internal+0x19f/0x200
Sep 22 20:01:35 eric kernel: bus_remove_device+0xc6/0x130
Sep 22 20:01:35 eric kernel: device_del+0x15c/0x3f0
Sep 22 20:01:35 eric kernel: ? __queue_work+0x1df/0x440
Sep 22 20:01:35 eric kernel: hid_destroy_device+0x4b/0x60
Sep 22 20:01:35 eric kernel: usbhid_disconnect+0x47/0x60 [usbhid 727dcc1c0b94e6b4418727a468398ac3bca492f3]
Sep 22 20:01:35 eric kernel: usb_unbind_interface+0x90/0x270
Sep 22 20:01:35 eric kernel: device_release_driver_internal+0x19f/0x200
Sep 22 20:01:35 eric kernel: bus_remove_device+0xc6/0x130
Sep 22 20:01:35 eric kernel: device_del+0x15c/0x3f0
Sep 22 20:01:35 eric kernel: ? kobject_put+0xa0/0x1d0
Sep 22 20:01:35 eric kernel: usb_disable_device+0xcd/0x1e0
Sep 22 20:01:35 eric kernel: usb_disconnect+0xde/0x2c0
Sep 22 20:01:35 eric kernel: usb_disconnect+0xc3/0x2c0
Sep 22 20:01:35 eric kernel: hub_event+0xe80/0x1c10
There have been quite a few bug reports (see Link tags) about this crash.
Fix all the TOCTOU issues, including the really bad power-supply related
system crash on USB disconnect, by making probe() use the workqueue for
running hidpp_connect_event() too, so that it can never run more then once.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2227221
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2227968
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2227968
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2242189
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217412#c58
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231005182638.3776-1-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent a section mismatch warning:
WARNING: modpost: drivers/platform/x86/hp/hp-wmi: section mismatch in reference: hp_wmi_driver+0x8 (section: .data) -> hp_wmi_bios_remove (section: .exit.text)
Fixes: c165b80cfe ("hp-wmi: fix handling of platform device")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231004111624.2667753-1-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>