The parity raid write/recover functionality is currently not very well
abstracted from the bio submission and completion handling in volumes.c:
- the raid56 code directly completes the original btrfs_bio fed into
btrfs_submit_bio instead of dispatching back to volumes.c
- the raid56 code consumes the bioc and bio_counter references taken
by volumes.c, which also leads to special casing of the calls from
the scrub code into the raid56 code
To fix this up supply a bi_end_io handler that calls back into the
volumes.c machinery, which then puts the bioc, decrements the bio_counter
and completes the original bio, and updates the scrub code to also
take ownership of the bioc and bio_counter in all cases.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The stripes_pending in the btrfs_io_context counts number of inflight
low-level bios for an upper btrfs_bio. For reads this is generally
one as reads are never cloned, while for writes we can trivially use
the bio remaining mechanisms that is used for chained bios.
To be able to make use of that mechanism, split out a separate trivial
end_io handler for the cloned bios that does a minimal amount of error
tracking and which then calls bio_endio on the original bio to transfer
control to that, with the remaining counter making sure it is completed
last. This then allows to merge btrfs_end_bioc into the original bio
bi_end_io handler.
To make this all work all error handling needs to happen through the
bi_end_io handler, which requires a small amount of reshuffling in
submit_stripe_bio so that the bio is cloned already by the time the
suitability of the device is checked.
This reduces the size of the btrfs_io_context and prepares splitting
the btrfs_bio at the stripe boundary.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Stop grabbing an extra bio_counter reference for each clone bio in a
mirrored write and instead just release the one original reference in
btrfs_end_bioc once all the bios for a single btrfs_bio have completed
instead of at the end of btrfs_submit_bio once all bios have been
submitted.
This means the reference is now carried by the "upper" btrfs_bio only
instead of each lower bio.
Also remove the now unused btrfs_bio_counter_inc_noblocked helper.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass the operation to btrfs_bio_alloc, matching what bio_alloc_bioset
set does.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
volumes.c is the place that implements the storage layer using the
btrfs_bio structure, so move the bio_set and allocation helpers there
as well.
To make up for the new initialization boilerplate, merge the two
init/exit helpers in extent_io.c into a single one.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs never uses bio integrity data itself, so don't allocate
the integrity pools for btrfs_bioset.
This patch is a revert of the commit b208c2f7ce ("btrfs: Fix crash due
to not allocating integrity data for a set"). The integrity data pool
is not needed, the bio-integrity code now handles allocating the
integrity payload without that.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
We are calling __btrfs_remove_free_space_cache everywhere to cleanup the
block group free space, however we can just use
btrfs_remove_free_space_cache and pass in the block group in all of
these places. Then we can remove __btrfs_remove_free_space_cache and
rename __btrfs_remove_free_space_cache_locked to
__btrfs_remove_free_space_cache.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that lockdep is staying enabled through our entire CI runs I started
seeing the following stack in generic/475
------------[ cut here ]------------
WARNING: CPU: 1 PID: 2171864 at fs/btrfs/discard.c:604 btrfs_discard_update_discardable+0x98/0xb0
CPU: 1 PID: 2171864 Comm: kworker/u4:0 Not tainted 5.19.0-rc8+ #789
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Workqueue: btrfs-cache btrfs_work_helper
RIP: 0010:btrfs_discard_update_discardable+0x98/0xb0
RSP: 0018:ffffb857c2f7bad0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8c85c605c200 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffffff86807c5b RDI: ffffffff868a831e
RBP: ffff8c85c4c54000 R08: 0000000000000000 R09: 0000000000000000
R10: ffff8c85c66932f0 R11: 0000000000000001 R12: ffff8c85c3899010
R13: ffff8c85d5be4f40 R14: ffff8c85c4c54000 R15: ffff8c86114bfa80
FS: 0000000000000000(0000) GS:ffff8c863bd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2e7f168160 CR3: 000000010289a004 CR4: 0000000000370ee0
Call Trace:
__btrfs_remove_free_space_cache+0x27/0x30
load_free_space_cache+0xad2/0xaf0
caching_thread+0x40b/0x650
? lock_release+0x137/0x2d0
btrfs_work_helper+0xf2/0x3e0
? lock_is_held_type+0xe2/0x140
process_one_work+0x271/0x590
? process_one_work+0x590/0x590
worker_thread+0x52/0x3b0
? process_one_work+0x590/0x590
kthread+0xf0/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
This is the code
ctl = block_group->free_space_ctl;
discard_ctl = &block_group->fs_info->discard_ctl;
lockdep_assert_held(&ctl->tree_lock);
We have a temporary free space ctl for loading the free space cache in
order to avoid having allocations happening while we're loading the
cache. When we hit an error we free it all up, however this also calls
btrfs_discard_update_discardable, which requires
block_group->free_space_ctl->tree_lock to be held. However this is our
temporary ctl so this lock isn't held. Fix this by calling
__btrfs_remove_free_space_cache_locked instead so that we only clean up
the entries and do not mess with the discardable stats.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When enabling quotas, at btrfs_quota_enable(), after committing the
transaction, we change fs_info->quota_root to point to the quota root we
created and set BTRFS_FS_QUOTA_ENABLED at fs_info->flags. Then we try
to start the qgroup rescan worker, first by initializing it with a call
to qgroup_rescan_init() - however if that fails we end up freeing the
quota root but we leave fs_info->quota_root still pointing to it, this
can later result in a use-after-free somewhere else.
We have previously set the flags BTRFS_FS_QUOTA_ENABLED and
BTRFS_QGROUP_STATUS_FLAG_ON, so we can only fail with -EINPROGRESS at
btrfs_quota_enable(), which is possible if someone already called the
quota rescan ioctl, and therefore started the rescan worker.
So fix this by ignoring an -EINPROGRESS and asserting we can't get any
other error.
Reported-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/linux-btrfs/20220823015931.421355-1-yebin10@huawei.com/
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs currently prints information about space cache or free space tree
being in use on every remount, regardless whether such remount actually
enabled or disabled one of these features.
This is actually unnecessary since providing remount options changing the
state of these features will explicitly print the appropriate notice.
Let's instead print such unconditional information just on an initial mount
to avoid filling the kernel log when, for example, laptop-mode-tools
remount the fs on some events.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_del_root_ref() we are using two return variables, named 'ret'
and 'err'. This makes it harder to follow and easier to return the wrong
value in case an error happens - the previous patch in the series, which
has the subject "btrfs: fix silent failure when deleting root
reference", fixed a bug due to confusion created by these two variables.
So change the function to use a single variable for tracking the return
value of the function, using only 'ret', which is consistent with most
of the codebase.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
struct btrfs_caching_ctl::progress and struct
btrfs_block_group::last_byte_to_unpin were previously needed to ensure
that unpin_extent_range() didn't return a range to the free space cache
before the caching thread had a chance to cache that range. However, the
commit "btrfs: fix space cache corruption and potential double
allocations" made it so that we always synchronously cache the block
group at the time that we pin the extent, so this machinery is no longer
necessary.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a bug causing send failures when processing an orphan directory
with no links. In commit 46b2f4590a ("Btrfs: fix send failure when
root has deleted files still open")', the orphan inode issue was
addressed. The send operation fails with a ENOENT error because of any
attempts to generate a path for the inode with a link count of zero.
Therefore, in that patch, sctx->ignore_cur_inode was introduced to be
set if the current inode has a link count of zero for bypassing some
unnecessary steps. And a helper function btrfs_unlink_all_paths() was
introduced and called to clean up old paths found in the parent
snapshot. However, not only regular files but also directories can be
orphan inodes. So if the send operation meets an orphan directory, it
will issue a wrong unlink command for that directory now. Soon the
receive operation fails with a EISDIR error. Besides, the send operation
also fails with a ENOENT error later when it tries to generate a path of
it.
Similar example but making an orphan dir for an incremental send:
$ btrfs subvolume create vol
$ mkdir vol/dir
$ touch vol/dir/foo
$ btrfs subvolume snapshot -r vol snap1
$ btrfs subvolume snapshot -r vol snap2
# Turn the second snapshot to RW mode and delete the whole dir while
# holding an open file descriptor on it.
$ btrfs property set snap2 ro false
$ exec 73<snap2/dir
$ rm -rf snap2/dir
# Set the second snapshot back to RO mode and do an incremental send.
$ btrfs property set snap2 ro true
$ mkdir receive_dir
$ btrfs send snap2 -p snap1 | btrfs receive receive_dir/
At subvol snap2
At snapshot snap2
ERROR: send ioctl failed with -2: No such file or directory
ERROR: unlink dir failed. Is a directory
Actually, orphan inodes are more common use cases in cascading backups.
(Please see the illustration below.) In a cascading backup, a user wants
to replicate a couple of snapshots from Machine A to Machine B and from
Machine B to Machine C. Machine B doesn't take any RO snapshots for
sending. All a receiver does is create an RW snapshot of its parent
snapshot, apply the send stream and turn it into RO mode at the end.
Even if all paths of some inodes are deleted in applying the send
stream, these inodes would not be deleted and become orphans after
changing the subvolume from RW to RO. Moreover, orphan inodes can occur
not only in send snapshots but also in parent snapshots because Machine
B may do a batch replication of a couple of snapshots.
An illustration for cascading backups:
Machine A (snapshot {1..n}) --> Machine B --> Machine C
The idea to solve the problem is to delete all the items of orphan
inodes before using these snapshots for sending. I used to think that
the reasonable timing for doing that is during the ioctl of changing the
subvolume from RW to RO because it sounds good that we will not modify
the fs tree of a RO snapshot anymore. However, attempting to do the
orphan cleanup in the ioctl would be pointless. Because if someone is
holding an open file descriptor on the inode, the reference count of the
inode will never drop to 0. Then iput() cannot trigger eviction, which
finally deletes all the items of it. So we try to extend the original
patch to handle orphans in send/parent snapshots. Here are several cases
that need to be considered:
Case 1: BTRFS_COMPARE_TREE_NEW
| send snapshot | action
--------------------------------
nlink | 0 | ignore
In case 1, when we get a BTRFS_COMPARE_TREE_NEW tree comparison result,
it means that a new inode is found in the send snapshot and it doesn't
appear in the parent snapshot. Since this inode has a link count of zero
(It's an orphan and there're no paths for it.), we can leverage
sctx->ignore_cur_inode in the original patch to prevent it from being
created.
Case 2: BTRFS_COMPARE_TREE_DELETED
| parent snapshot | action
----------------------------------
nlink | 0 | as usual
In case 2, when we get a BTRFS_COMPARE_TREE_DELETED tree comparison
result, it means that the inode only appears in the parent snapshot.
As usual, the send operation will try to delete all its paths. However,
this inode has a link count of zero, so no paths of it will be found. No
deletion operations will be issued. We don't need to change any logic.
Case 3: BTRFS_COMPARE_TREE_CHANGED
| | parent snapshot | send snapshot | action
-----------------------------------------------------------------------
subcase 1 | nlink | 0 | 0 | ignore
subcase 2 | nlink | >0 | 0 | new_gen(deletion)
subcase 3 | nlink | 0 | >0 | new_gen(creation)
In case 3, when we get a BTRFS_COMPARE_TREE_CHANGED tree comparison result,
it means that the inode appears in both snapshots. Here are 3 subcases.
First, when the inode has link counts of zero in both snapshots. Since
there are no paths for this inode in (source/destination) parent
snapshots and we don't care about whether there is also an orphan inode
in destination or not, we can set sctx->ignore_cur_inode on to prevent
it from being created.
For the second and the third subcases, if there are paths in one
snapshot and there're no paths in the other snapshot for this inode. We
can treat this inode as a new generation. We can also leverage the logic
handling a new generation of an inode with small adjustments. Then it
will delete all old paths and create a new inode with new attributes and
paths only when there's a positive link count in the send snapshot.
In subcase 2, the send operation only needs to delete all old paths as
in the parent snapshot. But it may require more operations for a
directory to remove its old paths. If a not-empty directory is going to
be deleted (because it has a link count of zero in the send snapshot)
but there are files/directories with bigger inode numbers under it, the
send operation will need to rename it to its orphan name first. After
processing and deleting the last item under this directory, the send
operation will check this directory, aka the parent directory of the
last item, again and issue a rmdir operation to remove it finally.
Therefore, we also need to treat inodes with a link count of zero as if
they didn't exist in get_cur_inode_state(), which is used in
process_recorded_refs(). By doing this, when checking a directory with
orphan names after the last item under it has been deleted, the send
operation now can properly issue a rmdir operation. Otherwise, without
doing this, the orphan directory with an orphan name would be kept here
at the end due to the existing inode with a link count of zero being
found.
In subcase 3, as in case 2, no old paths would be found, so no deletion
operations will be issued. The send operation will only create a new one
for that inode.
Note that subcase 3 is not common. That's because it's easy to reduce
the hard links of an inode, but once all valid paths are removed,
there are no valid paths for creating other hard links. The only way to
do that is trying to send an older snapshot after a newer snapshot has
been sent.
Reviewed-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Refactor get_inode_info() to populate all wanted fields on an output
structure. Besides, also introduce a helper function called
get_inode_gen(), which is commonly used.
Reviewed-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After we copied data to page cache in buffered I/O, we
1. Insert a EXTENT_UPTODATE state into inode's io_tree, by
endio_readpage_release_extent(), set_extent_delalloc() or
set_extent_defrag().
2. Set page uptodate before we unlock the page.
But the only place we check io_tree's EXTENT_UPTODATE state is in
btrfs_do_readpage(). We know we enter btrfs_do_readpage() only when we
have a non-uptodate page, so it is unnecessary to set EXTENT_UPTODATE.
For example, when performing a buffered random read:
fio --rw=randread --ioengine=libaio --direct=0 --numjobs=4 \
--filesize=32G --size=4G --bs=4k --name=job \
--filename=/mnt/file --name=job
Then check how many extent_state in io_tree:
cat /proc/slabinfo | grep btrfs_extent_state | awk '{print $2}'
w/o this patch, we got 640567 btrfs_extent_state.
w/ this patch, we got 204 btrfs_extent_state.
Maintaining such a big tree brings overhead since every I/O needs to insert
EXTENT_LOCKED, insert EXTENT_UPTODATE, then remove EXTENT_LOCKED. And in
every insert or remove, we need to lock io_tree, do tree search, alloc or
dealloc extent states. By removing unnecessary EXTENT_UPTODATE, we keep
io_tree in a minimal size and reduce overhead when performing buffered I/O.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Ethan Lien <ethanlien@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During log replay, when adding/replacing inode references, there are two
special cases that have special code for them:
1) When we have an inode with two or more hardlinks in the same directory,
therefore two or more names encoded in the same inode reference item,
and one of the hard links gets renamed to the old name of another hard
link - that is, the index number for a name changes. This was added in
commit 0d836392ca ("Btrfs: fix mount failure after fsync due to
hard link recreation"), and is covered by test case generic/502 from
fstests;
2) When we have several inodes that got renamed to an old name of some
other inode, in a cascading style. The code to deal with this special
case was added in commit 6b5fc433a7 ("Btrfs: fix fsync after
succession of renames of different files"), and is covered by test
cases generic/526 and generic/527 from fstests.
Both cases can be deal with by making sure __add_inode_ref() is always
called by add_inode_ref() for every name encoded in the inode reference
item, and not just for the first name that has a conflict. With such
change we no longer need that special casing for the two cases mentioned
before. So do those changes.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When discard=async was introduced there were also sysfs knobs and stats
for debugging and tuning, hidden under CONFIG_BTRFS_DEBUG. The defaults
have been set and so far seem to satisfy all users on a range of
workloads. As there are not only tunables (like iops or kbps) but also
stats tracking amount of discardable bytes, that should be available
when the async discard is on (otherwise it's not).
The stats are moved from the per-fs debug directory, so it's under
/sys/fs/btrfs/FSID/discard
- discard_bitmap_bytes - amount of discarded bytes from data tracked as
bitmaps
- discard_extent_bytes - dtto but as extents
- discard_bytes_saved -
- discardable_bytes - amount of bytes that can be discarded
- discardable_extents - number of extents to be discarded
- iops_limit - tunable limit of number of discard IOs to be issued
- kbps_limit - tunable limit of kilobytes per second issued as discard IO
- max_discard_size - tunable limit for size of one IO discard request
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a directory we start by flushing all its delayed items.
That results in adding dir index items to the subvolume btree, for new
dentries, and removing dir index items from the subvolume btree for any
dentries that were deleted.
This makes it straightforward to log a directory simply by iterating over
all the modified subvolume btree leaves, especially when we used to log
both dir index keys and dir item keys (before commit 339d035424
("btrfs: only copy dir index keys when logging a directory") and when we
used to copy old dir index entries for leaves modified in the current
transaction (before commit 732d591a5d ("btrfs: stop copying old dir
items when logging a directory")).
From an efficiency point of view this has a couple of drawbacks:
1) Adds extra latency, due to copying delayed items to the subvolume btree
and deleting dir index items from the btree.
Further if there are other tasks accessing the btree, which is common
(syscalls like creat, mkdir, rename, link, unlink, truncate, reflinks,
etc, finishing an ordered extent, etc), lock contention can cause
further delays, both to the task logging a directory and to the other
tasks accessing the btree;
2) More time spent overall flushing delayed items, if after logging the
directory further changes are done to the directory in the same
transaction.
For example, if we add 10 dentries to a directory, fsync it, add more
10 dentries, fsync it again, then add more 10 dentries and fsync it
again, then we end up inserting 3 batches of 10 items to the subvolume
btree. With the changes from this patch, we flush all the delayed items
to the btree only once - a single batch of 30 items, and outside the
logging code (transaction commit or when delayed items are flushed
asynchronously).
This change simply skips the flushing of delayed items every time we log a
directory. Instead we copy the delayed insertion items directly to the log
tree and delete delayed deletion items directly from the log tree.
Therefore avoiding changing first the subvolume btree and then scanning it
for new items to copy from it to the log tree and detecting deletions
by observing gaps in consecutive dir index keys in subvolume btree leaves.
Running the following tests on a non-debug kernel (Debian's default kernel
config), on a box with a NVMe device, a 12 cores Intel CPU and 64G of ram,
produced the results below.
The results compare a branch without this patch and all the other patches
it depends on versus the same branch with the patchset applied.
The patchset is comprised of the following patches:
btrfs: don't drop dir index range items when logging a directory
btrfs: remove the root argument from log_new_dir_dentries()
btrfs: update stale comment for log_new_dir_dentries()
btrfs: free list element sooner at log_new_dir_dentries()
btrfs: avoid memory allocation at log_new_dir_dentries() for common case
btrfs: remove root argument from btrfs_delayed_item_reserve_metadata()
btrfs: store index number instead of key in struct btrfs_delayed_item
btrfs: remove unused logic when looking up delayed items
btrfs: shrink the size of struct btrfs_delayed_item
btrfs: search for last logged dir index if it's not cached in the inode
btrfs: move need_log_inode() to above log_conflicting_inodes()
btrfs: move log_new_dir_dentries() above btrfs_log_inode()
btrfs: log conflicting inodes without holding log mutex of the initial inode
btrfs: skip logging parent dir when conflicting inode is not a dir
btrfs: use delayed items when logging a directory
Custom test script for testing time spent at btrfs_log_inode():
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
# Total number of files to create in the test directory.
NUM_FILES=10000
# Fsync after creating or renaming N files.
FSYNC_AFTER=100
umount $DEV &> /dev/null
mkfs.btrfs -f $DEV
mount -o ssd $DEV $MNT
TEST_DIR=$MNT/testdir
mkdir $TEST_DIR
echo "Creating files..."
for ((i = 1; i <= $NUM_FILES; i++)); do
echo -n > $TEST_DIR/file_$i
if (( ($i % $FSYNC_AFTER) == 0 )); then
xfs_io -c "fsync" $TEST_DIR
fi
done
sync
echo "Renaming files..."
for ((i = 1; i <= $NUM_FILES; i++)); do
mv $TEST_DIR/file_$i $TEST_DIR/file_$i.renamed
if (( ($i % $FSYNC_AFTER) == 0 )); then
xfs_io -c "fsync" $TEST_DIR
fi
done
umount $MNT
And using the following bpftrace script to capture the total time that is
spent at btrfs_log_inode():
#!/usr/bin/bpftrace
k:btrfs_log_inode
{
@start_log_inode[tid] = nsecs;
}
kr:btrfs_log_inode
/@start_log_inode[tid]/
{
$dur = (nsecs - @start_log_inode[tid]) / 1000;
@btrfs_log_inode_total_time = sum($dur);
delete(@start_log_inode[tid]);
}
END
{
clear(@start_log_inode);
}
Result before applying patchset:
@btrfs_log_inode_total_time: 622642
Result after applying patchset:
@btrfs_log_inode_total_time: 354134 (-43.1% time spent)
The following dbench script was also used for testing:
#!/bin/bash
NUM_JOBS=$(nproc --all)
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-O no-holes -R free-space-tree"
echo "performance" | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
umount $DEV &> /dev/null
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
dbench -D $MNT --skip-cleanup -t 120 -S $NUM_JOBS
umount $MNT
Before patchset:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 3322265 0.034 21.032
Close 2440562 0.002 0.994
Rename 140664 1.150 269.633
Unlink 670796 1.093 269.678
Deltree 96 5.481 15.510
Mkdir 48 0.004 0.052
Qpathinfo 3010924 0.014 8.127
Qfileinfo 528055 0.001 0.518
Qfsinfo 552113 0.003 0.372
Sfileinfo 270575 0.005 0.688
Find 1164176 0.052 13.931
WriteX 1658537 0.019 5.918
ReadX 5207412 0.003 1.034
LockX 10818 0.003 0.079
UnlockX 10818 0.002 0.313
Flush 232811 1.027 269.735
Throughput 869.867 MB/sec (sync dirs) 12 clients 12 procs max_latency=269.741 ms
After patchset:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 4152738 0.029 20.863
Close 3050770 0.002 1.119
Rename 175829 0.871 211.741
Unlink 838447 0.845 211.724
Deltree 120 4.798 14.162
Mkdir 60 0.003 0.005
Qpathinfo 3763807 0.011 4.673
Qfileinfo 660111 0.001 0.400
Qfsinfo 690141 0.003 0.429
Sfileinfo 338260 0.005 0.725
Find 1455273 0.046 6.787
WriteX 2073307 0.017 5.690
ReadX 6509193 0.003 1.171
LockX 13522 0.003 0.077
UnlockX 13522 0.002 0.125
Flush 291044 0.811 211.631
Throughput 1089.27 MB/sec (sync dirs) 12 clients 12 procs max_latency=211.750 ms
(+25.2% throughput, -21.5% max latency)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we find a conflicting inode (an inode that had the same name and
parent directory as the inode we are logging now) that was deleted in the
current transaction, we always end up logging its parent directory.
This is to deal with the case where the conflicting inode corresponds to
a deleted subvolume/snapshot or a directory that had subvolumes/snapshots
(or some subdirectory inside it had subvolumes/snapshots, etc), because
we can't deal with dropping subvolumes/snapshots during log replay. So
if we log the parent directory, and if we are dealing with these special
cases, then we fallback to a transaction commit when logging the parent,
because its last_unlink_trans will match the current transaction (which
gets set and propagated when a subvolume/snapshot is deleted).
This change skips the logging of the parent directory when the conflicting
inode is not a directory (or a subvolume/snapshot). This is ok because in
this case logging the current inode is enough to trigger an unlink of the
conflicting inode during log replay.
So for a case like this:
$ mkdir /mnt/dir
$ echo -n "first foo data" > /mnt/dir/foo
$ sync
$ rm -f /mnt/dir/foo
$ echo -n "second foo data" > /mnt/dir/foo
$ xfs_io -c "fsync" /mnt/dir/foo
We avoid logging parent directory "dir" when logging the new file "foo".
In other cases it avoids falling back to a transaction commit, when the
parent directory has a last_unlink_trans value that matches the current
transaction, due to moving a file from it to some other directory.
This is a case that happens frequently with dbench for example, where a
new file that has the name/parent of another file that was deleted in the
current transaction, is fsynced.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging an inode, if we detect the inode has a reference that
conflicts with some other inode that got renamed, we log that other inode
while holding the log mutex of the current inode. We then find out if
there are other inodes that conflict with the first conflicting inode,
and log them while under the log mutex of the original inode. This is
fine because the recursion can only happen once.
For the upcoming work where we directly log delayed items without flushing
them first to the subvolume tree, this recursion adds a lot of complexity
and it's hard to keep lockdep happy about it.
So collect a list of conflicting inodes and then log the inodes after
unlocking the log mutex of the inode we started with.
Also limit the maximum number of conflict inodes we log to 10, to avoid
spending too much time logging (and maybe allocating too many list
elements too), as typically we don't have more than 1 or 2 conflicting
inodes - if we go over the limit, simply fallback to a transaction commit.
It is possible to have a very long list of conflicting inodes to be
intentionally created by a user if he/she creates a very long succession
of renames like this:
(...)
rename E to F
rename D to E
rename C to D
rename B to C
rename A to B
touch A (create a new file named A)
fsync A
If that happened for a sequence of hundreds or thousands of renames, it
could massively slow down the logging and cause other secondary effects
like for example blocking other fsync operations and transaction commits
for a very long time (assuming it wouldn't run into -ENOSPC or -ENOMEM
first). However such cases are very uncommon to happen in practice,
nevertheless it's better to be prepared for them and avoid chaos.
Such long sequence of conflicting inodes could be created before this
change.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The static function log_new_dir_dentries() is currently defined below
btrfs_log_inode(), but in an upcoming patch a new function is introduced
that is called by btrfs_log_inode() and this new function needs to call
log_new_dir_dentries(). So move log_new_dir_dentries() to a location
between btrfs_log_inode() and need_log_inode() (the later is called by
log_new_dir_dentries()).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The static function need_log_inode() is defined below btrfs_log_inode()
and log_conflicting_inodes(), but in the next patches in the series we
will need to call need_log_inode() in a couple new functions that will be
used by btrfs_log_inode(). So move its definition to a location above
log_conflicting_inodes().
Also make its arguments 'const', since they are not supposed to be
modified.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The key offset of the last dir index item that was logged is stored in
the inode's last_dir_index_offset field. However that field is not
persisted in the inode item or elsewhere, so if the inode gets evicted
and reloaded, it gets a value of (u64)-1, so that when we are logging
dir index items we check if they were logged before, to avoid attempts
to insert duplicated keys and fallback to a transaction commit.
Improve on this by searching for the last dir index that was logged when
we start logging a directory if the inode's last_dir_index_offset is not
set (has a value of (u64)-1) and it was logged before. This avoids
checking if each dir index item we find was already logged before, and
simplifies the logging of dir index items (process_dir_items_leaf()).
This will also be needed for an incoming change where we start logging
delayed items directly, without flushing them first.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently struct btrfs_delayed_item has a base size of 96 bytes, but its
size can be decreased by doing the following 2 tweaks:
1) Change data_len from u32 to u16. Our maximum possible leaf size is 64K,
so the data_len can never be larger than that, and in fact it is always
much smaller than that. The max length for a dentry's name is ensured
at the VFS level (PATH_MAX, 4096 bytes) and in struct btrfs_inode_ref
and btrfs_dir_item we use a u16 to store the name's length;
2) Change 'ins_or_del' to a 1 bit enum, which is all we need since it
can only have 2 values. After this there's also no longer the need to
BUG_ON() before using 'ins_or_del' in several places. Also rename the
field from 'ins_or_del' to 'type', which is more clear.
These two tweaks decrease the size of struct btrfs_delayed_item from 96
bytes down to 88 bytes. A previous patch already reduced the size of this
structure by 16 bytes, but an upcoming change will increase its size by
16 bytes (adding a struct list_head element).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass NULL to the 'prev' and 'next' arguments of the function
__btrfs_lookup_delayed_item(), so remove these arguments. Also, remove
the unnecessary wrapper __btrfs_lookup_delayed_insertion_item(), making
btrfs_delete_delayed_insertion_item() directly call
__btrfs_lookup_delayed_item().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All delayed items are for dir index keys, so there's really no point of
having an embedded struct btrfs_key in struct btrfs_delayed_item, which
makes the structure use more space than necessary (and adds a hole of 7
bytes).
So replace the key field with an index number (u64), which reduces the
size of struct btrfs_delayed_item from 112 bytes down to 96 bytes.
Some upcoming work will increase the structure size by 16 bytes, so this
change compensates for that future size increase.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The root argument of btrfs_delayed_item_reserve_metadata() is used only
to get the fs_info object, but we already have a transaction handle, which
we can use to get the fs_info. So remove the root argument.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At log_new_dir_dentries() we always start by allocating a list element
for the starting inode and then do a while loop with the condition being
a list emptiness check.
This however is not needed, we can avoid allocating this initial list
element and then just check for the list emptiness at the end of the
loop's body. So just do that to save one memory allocation from the
kmalloc-32 slab.
This allows for not doing any memory allocation when we don't have any
subdirectory to log, which is a very common case.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At log_new_dir_dentries(), there's no need to keep the current list
element allocated while processing the leaves with directory items for
the current directory, and while logging other inodes. Plus in case we
find a subdirectory, we also end up allocating a new list element while
the current one is still allocated, temporarily using more memory than
necessary.
So free the current list element early on, before processing leaves.
Also make the removal and release of all list elements in case of an
error more simple by eliminating the label and goto, adding an explicit
loop to release all list elements in case an error happens.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The comment refers to the function log_dir_items() in order to check why
the inodes of new directory entries need to be logged, but the relevant
comments are no longer at log_dir_items(), they were moved to the function
process_dir_items_leaf() in commit eb10d85ee7 ("btrfs: factor out the
copying loop of dir items from log_dir_items()"). So update it with the
current function name.
Also remove references with i_mutex to "VFS lock", since the inode lock
is no longer a mutex since 2016 (it's now a rw semaphore).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no point in passing a root argument to log_new_dir_dentries()
because it always corresponds to the root of the given inode. So remove
it and extract the root from the given inode.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a directory that was previously logged in the current
transaction, we drop all the range items (BTRFS_DIR_LOG_INDEX_KEY key
type). This is because we will process all leaves in the subvolume's tree
that were changed in the current transaction and then add range items for
covering new dir index items and deleted dir index items, which could
cover now a larger range than before.
We used to fail if we tried to insert a range item key that already
exists, so we dropped all range items to avoid failing. However nowadays,
since commit 750ee45490 ("btrfs: fix assertion failure when logging
directory key range item"), we simply update any range item that already
exists, increasing its range's last dir index if needed. Since the range
covered by a range item can never decrease, due to the fact that dir index
values come from a monotonically increasing counter and are never reused,
we can stop dropping all range items before we start logging a directory.
By not dropping the items we can avoid having occasional tree rebalance
operations.
This will also be needed for an incoming change where we start logging
delayed items directly, without flushing them first.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[PROBLEM]
The existing scrub code for data extents always limit the block size to
sectorsize.
This causes quite some extra scrub_block being allocated:
(there is a data extent at logical bytenr 298844160, length 64KiB)
alloc_scrub_block: new block: logical=298844160 physical=298844160 mirror=1
alloc_scrub_block: new block: logical=298848256 physical=298848256 mirror=1
alloc_scrub_block: new block: logical=298852352 physical=298852352 mirror=1
alloc_scrub_block: new block: logical=298856448 physical=298856448 mirror=1
alloc_scrub_block: new block: logical=298860544 physical=298860544 mirror=1
alloc_scrub_block: new block: logical=298864640 physical=298864640 mirror=1
alloc_scrub_block: new block: logical=298868736 physical=298868736 mirror=1
alloc_scrub_block: new block: logical=298872832 physical=298872832 mirror=1
alloc_scrub_block: new block: logical=298876928 physical=298876928 mirror=1
alloc_scrub_block: new block: logical=298881024 physical=298881024 mirror=1
alloc_scrub_block: new block: logical=298885120 physical=298885120 mirror=1
alloc_scrub_block: new block: logical=298889216 physical=298889216 mirror=1
alloc_scrub_block: new block: logical=298893312 physical=298893312 mirror=1
alloc_scrub_block: new block: logical=298897408 physical=298897408 mirror=1
alloc_scrub_block: new block: logical=298901504 physical=298901504 mirror=1
alloc_scrub_block: new block: logical=298905600 physical=298905600 mirror=1
...
scrub_block_put: free block: logical=298844160 physical=298844160 len=4096 mirror=1
scrub_block_put: free block: logical=298848256 physical=298848256 len=4096 mirror=1
scrub_block_put: free block: logical=298852352 physical=298852352 len=4096 mirror=1
scrub_block_put: free block: logical=298856448 physical=298856448 len=4096 mirror=1
scrub_block_put: free block: logical=298860544 physical=298860544 len=4096 mirror=1
scrub_block_put: free block: logical=298864640 physical=298864640 len=4096 mirror=1
scrub_block_put: free block: logical=298868736 physical=298868736 len=4096 mirror=1
scrub_block_put: free block: logical=298872832 physical=298872832 len=4096 mirror=1
scrub_block_put: free block: logical=298876928 physical=298876928 len=4096 mirror=1
scrub_block_put: free block: logical=298881024 physical=298881024 len=4096 mirror=1
scrub_block_put: free block: logical=298885120 physical=298885120 len=4096 mirror=1
scrub_block_put: free block: logical=298889216 physical=298889216 len=4096 mirror=1
scrub_block_put: free block: logical=298893312 physical=298893312 len=4096 mirror=1
scrub_block_put: free block: logical=298897408 physical=298897408 len=4096 mirror=1
scrub_block_put: free block: logical=298901504 physical=298901504 len=4096 mirror=1
scrub_block_put: free block: logical=298905600 physical=298905600 len=4096 mirror=1
This behavior will waste a lot of memory, especially after we have moved
quite some members from scrub_sector to scrub_block.
[FIX]
To reduce the allocation of scrub_block, and to reduce memory usage, use
BTRFS_STRIPE_LEN instead of sectorsize as the block size to scrub data
extents.
This results only one scrub_block to be allocated for above data extent:
alloc_scrub_block: new block: logical=298844160 physical=298844160 mirror=1
scrub_block_put: free block: logical=298844160 physical=298844160 len=65536 mirror=1
This would greatly reduce the memory usage (even it's just transient)
for larger data extents scrub.
For above example, the memory usage would be:
Old: num_sectors * (sizeof(scrub_block) + sizeof(scrub_sector))
16 * (408 + 96) = 8065
New: sizeof(scrub_block) + num_sectors * sizeof(scrub_sector)
408 + 16 * 96 = 1944
A good reduction of 75.9%.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we store the following members in scrub_sector:
- logical
- physical
- physical_for_dev_replace
- dev
- mirror_num
However the current scrub code has ensured that scrub_blocks never cross
stripe boundary.
This is caused by the entry functions (scrub_simple_mirror,
scrub_simple_stripe), thus every scrub_block will not cross stripe
boundary.
Thus this makes it possible to move those members into scrub_block other
than putting them into scrub_sector.
This should save quite some memory, as a scrub_block can be as large as 64
sectors, even for metadata it's 16 sectors byte default.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although scrub currently works for subpage (PAGE_SIZE > sectorsize) cases,
it will allocate one page for each scrub_sector, which can cause extra
unnecessary memory usage.
Utilize scrub_block::pages[] instead of allocating page for each
scrub_sector, this allows us to integrate larger extents while using
less memory.
For example, if our page size is 64K, sectorsize is 4K, and we got an
32K sized extent.
We will only allocate one page for scrub_block, and all 8 scrub sectors
will point to that page.
To do that properly, here we introduce several small helpers:
- scrub_page_get_logical()
Get the logical bytenr of a page.
We store the logical bytenr of the page range into page::private.
But for 32bit systems, their (void *) is not large enough to contain
a u64, so in that case we will need to allocate extra memory for it.
For 64bit systems, we can use page::private directly.
- scrub_block_get_logical()
Just get the logical bytenr of the first page.
- scrub_sector_get_page()
Return the page which the scrub_sector points to.
- scrub_sector_get_page_offset()
Return the offset inside the page which the scrub_sector points to.
- scrub_sector_get_kaddr()
Return the address which the scrub_sector points to.
Just a wrapper using scrub_sector_get_page() and
scrub_sector_get_page_offset()
- bio_add_scrub_sector()
Please note that, even with this patch, we're still allocating one page
for one sector for data extents.
This is because in scrub_extent() we split the data extent using
sectorsize.
The memory usage reduction will need extra work to make scrub to work
like data read to only use the correct sector(s).
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BACKGROUND]
Currently for scrub, we allocate one page for one sector, this is fine
for PAGE_SIZE == sectorsize support, but can waste extra memory for
subpage support.
[CODE CHANGE]
Make scrub_block contain all the pages, so if we're scrubbing an extent
sized 64K, and our page size is also 64K, we only need to allocate one
page.
[LIFESPAN CHANGE]
Since now scrub_sector no longer holds a page, but is using
scrub_block::pages[] instead, we have to ensure scrub_block has a longer
lifespan for write bio. The lifespan for read bio is already large
enough.
Now scrub_block will only be released after the write bio finished.
[COMING NEXT]
Currently we only added scrub_block::pages[] for this purpose, but
scrub_sector is still utilizing the old scrub_sector::page.
The switch will happen in the next patch.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The allocation and initialization is shared by 3 call sites, and we're
going to change the initialization of some members in the upcoming
patches.
So factor out the allocation and initialization of scrub_sector into a
helper, alloc_scrub_sector(), which will do the following work:
- Allocate the memory for scrub_sector
- Allocate a page for scrub_sector::page
- Initialize scrub_sector::refs to 1
- Attach the allocated scrub_sector to scrub_block
The attachment is bidirectional, which means scrub_block::sectorv[]
will be updated and scrub_sector::sblock will also be updated.
- Update scrub_block::sector_count and do extra sanity check on it
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although there are only two callers, we are going to add some members
for scrub_block in the incoming patches. Factoring out the
initialization code will make later expansion easier.
One thing to note is, even scrub_handle_errored_block() doesn't utilize
scrub_block::refs, we still use alloc_scrub_block() to initialize
sblock::ref, allowing us to use scrub_block_put() to do cleanup.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In function scrub_handle_errored_block(), we use @sblocks_for_recheck
pointer to hold one scrub_block for each mirror, and uses kcalloc() to
allocate an array.
But this one pointer for an array is not readable due to the member
offsets done by addition and not [].
Change this pointer to struct scrub_block *[BTRFS_MAX_MIRRORS], this
will slightly increase the stack memory usage.
Since function scrub_handle_errored_block() won't get iterative calls,
this extra cost would completely be acceptable.
And since we're here, also set sblock->refs and use scrub_block_put() to
clean them up, as later we will add extra members in scrub_block, which
needs scrub_block_put() to clean them up.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Preserve the fs-verity status of a btrfs file across send/recv.
There is no facility for installing the Merkle tree contents directly on
the receiving filesystem, so we package up the parameters used to enable
verity found in the verity descriptor. This gives the receive side
enough information to properly enable verity again. Note that this means
that receive will have to re-compute the whole Merkle tree, similar to
how compression worked before encoded_write.
Since the file becomes read-only after verity is enabled, it is
important that verity is added to the send stream after any file writes.
Therefore, when we process a verity item, merely note that it happened,
then actually create the command in the send stream during
'finish_inode_if_needed'.
This also creates V3 of the send stream format, without any format
changes besides adding the new commands and attributes.
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Use `atomic_try_cmpxchg(ptr, &old, new)` instead of
`atomic_cmpxchg(ptr, old, new) == old` in free_extent_buffer. This
has two benefits:
- The x86 cmpxchg instruction returns success in the ZF flag, so this
change saves a compare after cmpxchg, as well as a related move
instruction in the front of cmpxchg.
- atomic_try_cmpxchg implicitly assigns the *ptr value to &old when
cmpxchg fails, enabling further code simplifications.
This patch has no functional change.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several sanity checks which are no longer possible to trigger
inside btrfs_scrub_dev().
Since we have mount time check against super block nodesize/sectorsize,
and our fixed macro is hardcoded to handle even the worst combination.
Thus those sanity checks are no longer needed, can be easily removed.
But this patch still uses some ASSERT()s as a safe net just in case we
change some features in the future to trigger those impossible
combinations.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We used to use this in a few spots, but now we only use it directly
inside of block-group.c, so remove the helper and just open code where
we were using it.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Before when this was modifying the bit field we had to protect it with
the bg->lock, however now we're using bit helpers so we can stop
using the bg->lock.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is used mostly to determine if we need to look at the caching ctl
list and clean up any references to this block group. However we never
clear this flag, specifically because we need to know if we have to
remove a caching ctl we have for this block group still. This is in the
remove block group path which isn't a fast path, so the optimization
doesn't really matter, simplify this logic and remove the flag.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're breaking out and re-searching for the next block group while
evicting any of the block group cache inodes. This is not needed, the
block groups aren't disappearing here, we can simply loop through the
block groups like normal and iput any inode that we find.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use this during device replace for zoned devices, we were simply
taking the lock because it was in a bit field and we needed the lock to
be safe with other modifications in the bitfield. With the bit helpers
we no longer require that locking.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use a bit field in the btrfs_block_group for different flags, however
this is awkward because we have to hold the block_group->lock for any
modification of any of these fields, and makes the code clunky for a few
of these flags. Convert these to a properly flags setup so we can
utilize the bit helpers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We previously had the pattern of
btrfs_update_space_info(all, the, bg, fields, &space_info);
link_block_group(bg);
bg->space_info = space_info;
Now that we're passing the bg into btrfs_add_bg_to_space_info we can do
the linking in that function, transforming this to simply
btrfs_add_bg_to_space_info(fs_info, bg);
and put the link_block_group() and bg->space_info assignment directly in
btrfs_add_bg_to_space_info.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function has grown a bunch of new arguments, and it just boils down
to passing in all the block group fields as arguments. Simplify this by
passing in the block group itself and updating the space_info fields
based on the block group fields directly.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
