The LBLCR entries should use svc->af, not dest->af.
Needed to support svc->af != dest->af.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Alex Gartrell <agartrell@fb.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
The LBLC entries should use svc->af, not dest->af.
Needed to support svc->af != dest->af.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Alex Gartrell <agartrell@fb.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Pull the common logic for preparing an skb to prepend the header into a
single function and then set fields such that they can be used in either
case (generalize tos and tclass to dscp, hop_limit and ttl to ttl, etc)
Signed-off-by: Alex Gartrell <agartrell@fb.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
The out_rt functions check to see if the mtu is large enough for the packet
and, if not, send icmp messages (TOOBIG or DEST_UNREACH) to the source and
bail out. We needed the ability to send ICMP from the out_rt_v6 function
and DEST_UNREACH from the out_rt function, so we just pulled it out into a
common function.
Signed-off-by: Alex Gartrell <agartrell@fb.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Another step toward heterogeneous pools, this removes another piece of
functionality currently specific to each address family type.
Signed-off-by: Alex Gartrell <agartrell@fb.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
This logic is repeated in both out_rt functions so it was redundant.
Additionally, we'll need to be able to do checks to route v4 to v6 and vice
versa in order to deal with heterogeneous pools.
This patch also updates the callsites to add an additional parameter to the
out route functions.
Signed-off-by: Alex Gartrell <agartrell@fb.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
The synchronization protocol is not compatible with heterogeneous pools, so
we need to verify that we're not turning both on at the same time.
Signed-off-by: Alex Gartrell <agartrell@fb.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
The assumption that dest af is equal to service af is now unreliable, so we
must specify it manually so as not to copy just the first 4 bytes of a v6
address or doing an illegal read of 16 butes on a v6 address.
We "lie" in two places: for synchronization (which we will explicitly
disallow from happening when we have heterogeneous pools) and for black
hole addresses where there's no real dest.
Signed-off-by: Alex Gartrell <agartrell@fb.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Part of a series of diffs to tease out destination family from virtual
family. This diff just adds a parameter to ip_vs_trash_get and then uses
it for comparison rather than svc->af.
Signed-off-by: Alex Gartrell <agartrell@fb.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
We need to remove the assumption that virtual address family is the same as
real address family in order to support heterogeneous services (that is,
services with v4 vips and v6 backends or the opposite).
Signed-off-by: Alex Gartrell <agartrell@fb.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
This is necessary to support heterogeneous pools. For example, if you have
an ipv6 addressed network, you'll want to be able to forward ipv4 traffic
into it.
This patch enforces that destination address family is the same as service
family, as none of the forwarding mechanisms support anything else.
For the old setsockopt mechanism, we simply set the dest address family to
AF_INET as we do with the service.
Signed-off-by: Alex Gartrell <agartrell@fb.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Add simple weighted IPVS failover support to the Linux kernel. All
other scheduling modules implement some form of load balancing, while
this offers a simple failover solution. Connections are directed to
the appropriate server based solely on highest weight value and server
availability. Tested functionality with keepalived.
Signed-off-by: Kenny Mathis <kmathis@chokepoint.net>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Pablo Neira Ayuso says:
====================
nf-next pull request
The following patchset contains Netfilter/IPVS updates for your
net-next tree. Regarding nf_tables, most updates focus on consolidating
the NAT infrastructure and adding support for masquerading. More
specifically, they are:
1) use __u8 instead of u_int8_t in arptables header, from
Mike Frysinger.
2) Add support to match by skb->pkttype to the meta expression, from
Ana Rey.
3) Add support to match by cpu to the meta expression, also from
Ana Rey.
4) A smatch warning about IPSET_ATTR_MARKMASK validation, patch from
Vytas Dauksa.
5) Fix netnet and netportnet hash types the range support for IPv4,
from Sergey Popovich.
6) Fix missing-field-initializer warnings resolved, from Mark Rustad.
7) Dan Carperter reported possible integer overflows in ipset, from
Jozsef Kadlecsick.
8) Filter out accounting objects in nfacct by type, so you can
selectively reset quotas, from Alexey Perevalov.
9) Move specific NAT IPv4 functions to the core so x_tables and
nf_tables can share the same NAT IPv4 engine.
10) Use the new NAT IPv4 functions from nft_chain_nat_ipv4.
11) Move specific NAT IPv6 functions to the core so x_tables and
nf_tables can share the same NAT IPv4 engine.
12) Use the new NAT IPv6 functions from nft_chain_nat_ipv6.
13) Refactor code to add nft_delrule(), which can be reused in the
enhancement of the NFT_MSG_DELTABLE to remove a table and its
content, from Arturo Borrero.
14) Add a helper function to unregister chain hooks, from
Arturo Borrero.
15) A cleanup to rename to nft_delrule_by_chain for consistency with
the new nft_*() functions, also from Arturo.
16) Add support to match devgroup to the meta expression, from Ana Rey.
17) Reduce stack usage for IPVS socket option, from Julian Anastasov.
18) Remove unnecessary textsearch state initialization in xt_string,
from Bojan Prtvar.
19) Add several helper functions to nf_tables, more work to prepare
the enhancement of NFT_MSG_DELTABLE, again from Arturo Borrero.
20) Enhance NFT_MSG_DELTABLE to delete a table and its content, from
Arturo Borrero.
21) Support NAT flags in the nat expression to indicate the flavour,
eg. random fully, from Arturo.
22) Add missing audit code to ebtables when replacing tables, from
Nicolas Dichtel.
23) Generalize the IPv4 masquerading code to allow its re-use from
nf_tables, from Arturo.
24) Generalize the IPv6 masquerading code, also from Arturo.
25) Add the new masq expression to support IPv4/IPv6 masquerading
from nf_tables, also from Arturo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the more common pr_warn.
Other miscellanea:
o Coalesce formats
o Realign arguments
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The nft_masq expression is intended to perform NAT in the masquerade flavour.
We decided to have the masquerade functionality in a separated expression other
than nft_nat.
Signed-off-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Both SNAT and DNAT (and the upcoming masquerade) can have additional
configuration parameters, such as port randomization and NAT addressing
persistence. We can cover these scenarios by simply adding a flag
attribute for userspace to fill when needed.
The flags to use are defined in include/uapi/linux/netfilter/nf_nat.h:
NF_NAT_RANGE_MAP_IPS
NF_NAT_RANGE_PROTO_SPECIFIED
NF_NAT_RANGE_PROTO_RANDOM
NF_NAT_RANGE_PERSISTENT
NF_NAT_RANGE_PROTO_RANDOM_FULLY
NF_NAT_RANGE_PROTO_RANDOM_ALL
The caller must take care of not messing up with the flags, as they are
added unconditionally to the final resulting nf_nat_range.
Signed-off-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch extend the NFT_MSG_DELTABLE call to support flushing the entire
ruleset.
The options now are:
* No family speficied, no table specified: flush all the ruleset.
* Family specified, no table specified: flush all tables in the AF.
* Family specified, table specified: flush the given table.
Signed-off-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch refactor the code to schedule objects deletion.
They are useful in follow-up patches.
In order to be able to use these new helper functions in all the code,
they are placed in the top of the file, with all the dependant functions
and symbols.
nft_rule_disactivate_next has been renamed to nft_rule_deactivate.
Signed-off-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The skb_find_text() accepts uninitialized textsearch state variable.
Signed-off-by: Bojan Prtvar <prtvar.b@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Use union to reserve the required stack space for sockopt data
which is less than the currently hardcoded value of 128.
Now the tables for commands should be more readable.
The checks added for readability are optimized by compiler,
others warn at compile time if command uses too much
stack or exceeds the storage of set_arglen and get_arglen.
As Dan Carpenter points out, we can run for unprivileged user,
so we can silent some error messages.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
CC: Dan Carpenter <dan.carpenter@oracle.com>
CC: Andrey Utkin <andrey.krieger.utkin@gmail.com>
CC: David Binderman <dcb314@hotmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add devgroup support to let us match device group of a packets incoming
or outgoing interface.
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For the sake of homogenize the function naming scheme, let's rename
nf_table_delrule_by_chain() to nft_delrule_by_chain().
Signed-off-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds a helper function to unregister chain hooks in the chain
deletion path. Basically, a code factorization.
The new function is useful in follow-up patches.
Signed-off-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This helper function always schedule the rule to be removed in the following
transaction.
In follow-up patches, it is interesting to handle separately the logic of rule
activation/disactivation from the transaction mechanism.
So, this patch simply splits the original nf_tables_delrule_one() in two
functions, allowing further control.
While at it, for the sake of homigeneize the function naming scheme, let's
rename nf_tables_delrule_one() to nft_delrule().
Signed-off-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Paul Bolle reports that 'select NETFILTER_XT_NAT' from the IPV4 and IPV6
NAT tables becomes noop since there is no Kconfig switch for it. Add the
Kconfig switch to resolve this problem.
Fixes: 8993cf8 netfilter: move NAT Kconfig switches out of the iptables scope
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
CONFIG_NETFILTER_XT_TARGET_LOG is not selected anymore when jumping
from 3.16 to 3.17-rc1 if you don't set on the new NF_LOG_IPV4 and
NF_LOG_IPV6 switches.
Change this to select the three new symbols NF_LOG_COMMON, NF_LOG_IPV4
and NF_LOG_IPV6 instead, so NETFILTER_XT_TARGET_LOG remains enabled
when moving from old to new kernels.
Reported-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
commit fc60476761
("ipvs: changes for local real server") from 2.6.37
introduced DNAT support to local real server but the
IPv6 LOCAL_OUT handler ip_vs_local_reply6() is
registered incorrectly as IPv4 hook causing any outgoing
IPv4 traffic to be dropped depending on the IP header values.
Chris tracked down the problem to CONFIG_IP_VS_IPV6=y
Bug report: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1349768
Reported-by: Chris J Arges <chris.j.arges@canonical.com>
Tested-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
The tunneling method should properly use tunnel encapsulation.
Fixes problem with CHECKSUM_PARTIAL packets when TCP/UDP csum
offload is supported.
Thanks to Alex Gartrell for reporting the problem, providing
solution and for all suggestions.
Reported-by: Alex Gartrell <agartrell@fb.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Alex Gartrell <agartrell@fb.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
You can use this to skip accounting objects when listing/resetting
via NFNL_MSG_ACCT_GET/NFNL_MSG_ACCT_GET_CTRZERO messages with the
NLM_F_DUMP netlink flag. The filtering covers the following cases:
1. No filter specified. In this case, the client will get old behaviour,
2. List/reset counter object only: In this case, you have to use
NFACCT_F_QUOTA as mask and value 0.
3. List/reset quota objects only: You have to use NFACCT_F_QUOTA_PKTS
as mask and value - the same, for byte based quota mask should be
NFACCT_F_QUOTA_BYTES and value - the same.
If you want to obtain the object with any quota type
(ie. NFACCT_F_QUOTA_PKTS|NFACCT_F_QUOTA_BYTES), you need to perform
two dump requests, one to obtain NFACCT_F_QUOTA_PKTS objects and
another for NFACCT_F_QUOTA_BYTES.
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Use HAVE_JUMP_LABEL as elsewhere in the kernel to ensure
that the toolchain has the required support in addition to
CONFIG_JUMP_LABEL being set.
Signed-off-by: Zhouyi Zhou <yizhouzhou@ict.ac.cn>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Dan Carpenter reported that the static checker emits the warning
net/netfilter/ipset/ip_set_list_set.c:600 init_list_set()
warn: integer overflows 'sizeof(*map) + size * set->dsize'
Limit the maximal number of elements in list type of sets.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Resolve missing-field-initializer warnings by providing a
directed initializer.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Ranges of values are broken with hash:net,net and hash:net,port,net.
hash:net,net
============
# ipset create test-nn hash:net,net
# ipset add test-nn 10.0.10.1-10.0.10.127,10.0.0.0/8
# ipset list test-nn
Name: test-nn
Type: hash:net,net
Revision: 0
Header: family inet hashsize 1024 maxelem 65536
Size in memory: 16960
References: 0
Members:
10.0.10.1,10.0.0.0/8
# ipset test test-nn 10.0.10.65,10.0.0.1
10.0.10.65,10.0.0.1 is NOT in set test-nn.
# ipset test test-nn 10.0.10.1,10.0.0.1
10.0.10.1,10.0.0.1 is in set test-nn.
hash:net,port,net
=================
# ipset create test-npn hash:net,port,net
# ipset add test-npn 10.0.10.1-10.0.10.127,tcp:80,10.0.0.0/8
# ipset list test-npn
Name: test-npn
Type: hash:net,port,net
Revision: 0
Header: family inet hashsize 1024 maxelem 65536
Size in memory: 17344
References: 0
Members:
10.0.10.8/29,tcp:80,10.0.0.0
10.0.10.16/28,tcp:80,10.0.0.0
10.0.10.2/31,tcp:80,10.0.0.0
10.0.10.64/26,tcp:80,10.0.0.0
10.0.10.32/27,tcp:80,10.0.0.0
10.0.10.4/30,tcp:80,10.0.0.0
10.0.10.1,tcp:80,10.0.0.0
# ipset list test-npn
# ipset test test-npn 10.0.10.126,tcp:80,10.0.0.2
10.0.10.126,tcp:80,10.0.0.2 is NOT in set test-npn.
# ipset test test-npn 10.0.10.126,tcp:80,10.0.0.0
10.0.10.126,tcp:80,10.0.0.0 is in set test-npn.
# ipset create test-npn hash:net,port,net
# ipset add test-npn 10.0.10.0/24,tcp:80-81,10.0.0.0/8
# ipset list test-npn
Name: test-npn
Type: hash:net,port,net
Revision: 0
Header: family inet hashsize 1024 maxelem 65536
Size in memory: 17024
References: 0
Members:
10.0.10.0,tcp:80,10.0.0.0
10.0.10.0,tcp:81,10.0.0.0
# ipset test test-npn 10.0.10.126,tcp:80,10.0.0.0
10.0.10.126,tcp:80,10.0.0.0 is NOT in set test-npn.
# ipset test test-npn 10.0.10.0,tcp:80,10.0.0.0
10.0.10.0,tcp:80,10.0.0.0 is in set test-npn.
Correctly setup from..to variables where no IPSET_ATTR_IP_TO{,2}
attribute is given, so in range processing loop we construct proper
cidr value. Check whenever we have no ranges and can short cut in
hash:net,net properly. Use unlikely() where appropriate, to comply
with other modules.
Signed-off-by: Sergey Popovich <popovich_sergei@mail.ru>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Markmask is an u32, hence it can't be greater then 4294967295 ( i.e.
0xffffffff ). This was causing smatch warning:
net/netfilter/ipset/ip_set_hash_gen.h:1084 hash_ipmark_create() warn:
impossible condition '(markmask > 4294967295) => (0-u32max > u32max)'
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Add cpu support to meta expresion.
This allows you to match packets with cpu number.
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add pkttype support for ip, ipv6 and inet families of tables.
This allows you to fetch the meta packet type based on the link layer
information. The loopback traffic is a special case, the packet type
is guessed from the network layer header.
No special handling for bridge and arp since we're not going to see
such traffic in the loopback interface.
Joint work with Alvaro Neira Ayuso <alvaroneay@gmail.com>
Signed-off-by: Alvaro Neira Ayuso <alvaroneay@gmail.com>
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Replace open codings of (((u64) <x> * <y>) >> 32) with reciprocal_scale().
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
ktime_get_ns() replaces ktime_to_ns(ktime_get())
ktime_get_real_ns() replaces ktime_to_ns(ktime_get_real())
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This enables the netfilter NAT engine in first place, otherwise
you cannot ever select the nf_tables nat expression if iptables
is not selected.
Reported-by: Matteo Croce <technoboy85@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There's actually no good reason why we cannot use cgroup id 0,
so lets just remove this artificial barrier.
Reported-by: Alexey Perevalov <a.perevalov@samsung.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Tested-by: Alexey Perevalov <a.perevalov@samsung.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently, the NAT configs depend on iptables and ip6tables. However,
users should be capable of enabling NAT for nft without having to
switch on iptables.
Fix this by adding new specific IP_NF_NAT and IP6_NF_NAT config
switches for iptables and ip6tables NAT support. I have also moved
the original NF_NAT_IPV4 and NF_NAT_IPV6 configs out of the scope
of iptables to make them independent of it.
This patch also adds NETFILTER_XT_NAT which selects the xt_nat
combo that provides snat/dnat for iptables. We cannot use NF_NAT
anymore since nf_tables can select this.
Reported-by: Matteo Croce <technoboy85@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Convert a zero return value on error to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric Dumazet reports that getsockopt() or setsockopt() sometimes
returns -EINTR instead of -ENOPROTOOPT, causing headaches to
application developers.
This patch replaces all the mutex_lock_interruptible() by mutex_lock()
in the netfilter tree, as there is no reason we should sleep for a
long time there.
Reported-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Fix possible replacement of the per-cpu chain counters by null
pointer when updating an existing chain in the commit path.
Reported-by: Matteo Croce <technoboy85@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This should happen once the element has been effectively released in
the commit path, not before. This fixes a possible chain refcount leak
if the transaction is aborted.
Reported-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Conflicts:
drivers/net/Makefile
net/ipv6/sysctl_net_ipv6.c
Two ipv6_table_template[] additions overlap, so the index
of the ipv6_table[x] assignments needed to be adjusted.
In the drivers/net/Makefile case, we've gotten rid of the
garbage whereby we had to list every single USB networking
driver in the top-level Makefile, there is just one
"USB_NETWORKING" that guards everything.
Signed-off-by: David S. Miller <davem@davemloft.net>
The sizing of the hash table and the practice of requiring a lookup
to retrieve the pprev to be stored in the element cookie before the
deletion of an entry is left intact.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Patrick McHardy <kaber@trash.net>
Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
clean up names related to socket filtering and bpf in the following way:
- everything that deals with sockets keeps 'sk_*' prefix
- everything that is pure BPF is changed to 'bpf_*' prefix
split 'struct sk_filter' into
struct sk_filter {
atomic_t refcnt;
struct rcu_head rcu;
struct bpf_prog *prog;
};
and
struct bpf_prog {
u32 jited:1,
len:31;
struct sock_fprog_kern *orig_prog;
unsigned int (*bpf_func)(const struct sk_buff *skb,
const struct bpf_insn *filter);
union {
struct sock_filter insns[0];
struct bpf_insn insnsi[0];
struct work_struct work;
};
};
so that 'struct bpf_prog' can be used independent of sockets and cleans up
'unattached' bpf use cases
split SK_RUN_FILTER macro into:
SK_RUN_FILTER to be used with 'struct sk_filter *' and
BPF_PROG_RUN to be used with 'struct bpf_prog *'
__sk_filter_release(struct sk_filter *) gains
__bpf_prog_release(struct bpf_prog *) helper function
also perform related renames for the functions that work
with 'struct bpf_prog *', since they're on the same lines:
sk_filter_size -> bpf_prog_size
sk_filter_select_runtime -> bpf_prog_select_runtime
sk_filter_free -> bpf_prog_free
sk_unattached_filter_create -> bpf_prog_create
sk_unattached_filter_destroy -> bpf_prog_destroy
sk_store_orig_filter -> bpf_prog_store_orig_filter
sk_release_orig_filter -> bpf_release_orig_filter
__sk_migrate_filter -> bpf_migrate_filter
__sk_prepare_filter -> bpf_prepare_filter
API for attaching classic BPF to a socket stays the same:
sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *)
and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program
which is used by sockets, tun, af_packet
API for 'unattached' BPF programs becomes:
bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *)
and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program
which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
nft_del_setelem() currently calls nft_data_uninit() twice on the same
key. Once to release the key which is guaranteed to be NFT_DATA_VALUE
and a second time in the error path to which it falls through.
The second call has been harmless so far though because the type
passed is always NFT_DATA_VALUE which is currently a no-op.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
