The Itanium architecture is obsolete, and an informal survey [0] reveals
that any residual use of Itanium hardware in production is mostly HP-UX
or OpenVMS based. The use of Linux on Itanium appears to be limited to
enthusiasts that occasionally boot a fresh Linux kernel to see whether
things are still working as intended, and perhaps to churn out some
distro packages that are rarely used in practice.
None of the original companies behind Itanium still produce or support
any hardware or software for the architecture, and it is listed as
'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers
that contributed on behalf of those companies (nor anyone else, for that
matter) have been willing to support or maintain the architecture
upstream or even be responsible for applying the odd fix. The Intel
firmware team removed all IA-64 support from the Tianocore/EDK2
reference implementation of EFI in 2018. (Itanium is the original
architecture for which EFI was developed, and the way Linux supports it
deviates significantly from other architectures.) Some distros, such as
Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have
dropped support years ago.
While the argument is being made [1] that there is a 'for the common
good' angle to being able to build and run existing projects such as the
Grid Community Toolkit [2] on Itanium for interoperability testing, the
fact remains that none of those projects are known to be deployed on
Linux/ia64, and very few people actually have access to such a system in
the first place. Even if there were ways imaginable in which Linux/ia64
could be put to good use today, what matters is whether anyone is
actually doing that, and this does not appear to be the case.
There are no emulators widely available, and so boot testing Itanium is
generally infeasible for ordinary contributors. GCC still supports IA-64
but its compile farm [3] no longer has any IA-64 machines. GLIBC would
like to get rid of IA-64 [4] too because it would permit some overdue
code cleanups. In summary, the benefits to the ecosystem of having IA-64
be part of it are mostly theoretical, whereas the maintenance overhead
of keeping it supported is real.
So let's rip off the band aid, and remove the IA-64 arch code entirely.
This follows the timeline proposed by the Debian/ia64 maintainer [5],
which removes support in a controlled manner, leaving IA-64 in a known
good state in the most recent LTS release. Other projects will follow
once the kernel support is removed.
[0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/
[1] https://lore.kernel.org/all/0075883c-7c51-00f5-2c2d-5119c1820410@web.de/
[2] https://gridcf.org/gct-docs/latest/index.html
[3] https://cfarm.tetaneutral.net/machines/list/
[4] https://lore.kernel.org/all/87bkiilpc4.fsf@mid.deneb.enyo.de/
[5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add CI integration support files for drm subsystem to gitlab.freedesktop.org instance.
-----BEGIN PGP SIGNATURE-----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=X1RZ
-----END PGP SIGNATURE-----
Merge tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm
Pull drm ci scripts from Dave Airlie:
"This is a bunch of ci integration for the freedesktop gitlab instance
where we currently do upstream userspace testing on diverse sets of
GPU hardware. From my perspective I think it's an experiment worth
going with and seeing how the benefits/noise playout keeping these
files useful.
Ideally I'd like to get this so we can do pre-merge testing on PRs
eventually.
Below is some info from danvet on why we've ended up making the
decision and how we can roll it back if we decide it was a bad plan.
Why in upstream?
- like documentation, testcases, tools CI integration is one of these
things where you can waste endless amounts of time if you
accidentally have a version that doesn't match your source code
- but also like the above, there's a balance, this is the initial cut
of what we think makes sense to keep in sync vs out-of-tree,
probably needs adjustment
- gitlab supports out-of-repo gitlab integration and that's what's
been used for the kernel in drm, but it results in per-driver
fragmentation and lots of duplicated effort. the simple act of
smashing an arbitrary winner into a topic branch already started
surfacing patches on dri-devel and sparking good cross driver team
discussions
Why gitlab?
- it's not any more shit than any of the other CI
- drm userspace uses it extensively for everything in userspace, we
have a lot of people and experience with this, including
integration of hw testing labs
- media userspace like gstreamer is also on gitlab.fd.o, and there's
discussion to extend this to the media subsystem in some fashion
Can this be shared?
- there's definitely a pile of code that could move to scripts/ if
other subsystem adopt ci integration in upstream kernel git. other
bits are more drm/gpu specific like the igt-gpu-tests/tools
integration
- docker images can be run locally or in other CI runners
Will we regret this?
- it's all in one directory, intentionally, for easy deletion
- probably 1-2 years in upstream to see whether this is worth it or a
Big Mistake. that's roughly what it took to _really_ roll out solid
CI in the bigger userspace projects we have on gitlab.fd.o like
mesa3d"
* tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm:
drm: ci: docs: fix build warning - add missing escape
drm: Add initial ci/ subdirectory
perf tools maintainership:
- Add git information for perf-tools and perf-tools-next trees/branches to the
MAINTAINERS file. That is where development now takes place and myself and
Namhyung Kim have write access, more people to come as we emulate other
maintainer groups.
perf record:
- Record kernel data maps when 'perf record --data' is used, so that global variables can
be resolved and used in tools that do data profiling.
perf trace:
- Remove the old, experimental support for BPF events in which a .c file was passed as
an event: "perf trace -e hello.c" to then get compiled and loaded.
The only known usage for that, that shipped with the kernel as an example for such events,
augmented the raw_syscalls tracepoints and was converted to a libbpf skeleton, reusing all
the user space components and the BPF code connected to the syscalls.
In the end just the way to glue the BPF part and the user space type beautifiers changed,
now being performed by libbpf skeletons.
The next step is to use BTF to do pretty printing of all syscall types, as discussed with
Alan Maguire and others.
Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all path/filenames/strings,
some of the networking data structures, perf_event_attr, etc, i.e. systemwide tracing of
nanosleep calls and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5 seconds:
# perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5
0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0
10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ...
? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0
3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ...
3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0
Performance counter stats for 'sleep 5':
2,617,347 cycles
1,855,997 instructions # 0.71 insn per cycle
5.002282128 seconds time elapsed
0.000855000 seconds user
0.000852000 seconds sys
#
perf annotate:
- Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1) for
licensing reasons, and we missed a build test on tools/perf/tests makefile.
Since we now default to NDEBUG=1, we ended up segfaulting when building with
BUILD_NONDISTRO=1 because a needed initialization routine was being "error
checked" via an assert.
Fix it by explicitly checking the result and aborting instead if it fails.
We better back propagate the error, but at least 'perf annotate' on samples
collected for a BPF program is back working when perf is built with
BUILD_NONDISTRO=1.
perf report/top:
- Add back TUI hierarchy mode header, that is seen when using 'perf report/top --hierarchy'.
- Fix the number of entries for 'e' key in the TUI that was preventing navigation of
lines when expanding an entry.
perf report/script:
- Support cross platform register handling, allowing a perf.data file collected
on one architecture to have registers sampled correctly displayed when
analysis tools such as 'perf report' and 'perf script' are used on a different
architecture.
- Fix handling of event attributes in pipe mode, i.e. when one uses:
perf record -o - | perf report -i -
When no perf.data files are used.
- Handle files generated via pipe mode with a version of perf and then read
also via pipe mode with a different version of perf, where the event attr
record may have changed, use the record size field to properly support this
version mismatch.
perf probe:
- Accessing global variables from uprobes isn't supported, make the error
message state that instead of stating that some minimal kernel version is
needed to have that feature. This seems just a tool limitation, the kernel
probably has all that is needed.
perf tests:
- Fix a reference count related leak in the dlfilter v0 API where the result
of a thread__find_symbol_fb() is not matched with an addr_location__exit()
to drop the reference counts of the resolved components (machine, thread, map,
symbol, etc). Add a dlfilter test to make sure that doesn't regresses.
- Lots of fixes for the 'perf test' written in shell script related to problems
found with the shellcheck utility.
- Fixes for 'perf test' shell scripts testing features enabled when perf is
built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf counters.
- Add perf record sample filtering test, things like the following example, that gets
implemented as a BPF filter attached to the event:
# perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000'
- Improve the way the task_analyzer test checks if libtraceevent is linked,
using 'perf version --build-options' instead of the more expensinve
'perf record -e "sched:sched_switch"'.
- Add support for riscv in the mmap-basic test. (This went as well via the RiscV tree, same contents).
libperf:
- Implement riscv mmap support (This went as well via the RiscV tree, same contents).
perf script:
- New tool that converts perf.data files to the firefox profiler format so that one can use
the visualizer at https://profiler.firefox.com/. Done by Anup Sharma as part of this year's
Google Summer of Code.
One can generate the output and upload it to the web interface but Anup also automated
everything:
perf script gecko -F 99 -a sleep 60
- Support syscall name parsing on arm64.
- Print "cgroup" field on the same line as "comm".
perf bench:
- Add new 'uprobe' benchmark to measure the overhead of uprobes with/without
BPF programs attached to it.
- breakpoints are not available on power9, skip that test.
perf stat:
- Add #num_cpus_online literal to be used in 'perf stat' metrics, and add this extra
'perf test' check that exemplifies its purpose:
TEST_ASSERT_VAL("#num_cpus_online",
expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0);
TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0);
TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online);
Miscellaneous:
- Improve tool startup time by lazily reading PMU, JSON, sysfs data.
- Improve error reporting in the parsing of events, passing YYLTYPE to error routines,
so that the output can show were the parsing error was found.
- Add 'perf test' entries to check the parsing of events improvements.
- Fix various leak for things detected by -fsanitize=address, mostly things that would
be freed at tool exit, including:
- Free evsel->filter on the destructor.
- Allow tools to register a thread->priv destructor and use it in 'perf trace'.
- Free evsel->priv in 'perf trace'.
- Free string returned by synthesize_perf_probe_point() when the caller fails
to do all it needs.
- Adjust various compiler options to not consider errors some warnings when
building with broken headers found in things like python, flex, bison, as we
otherwise build with -Werror. Some for gcc, some for clang, some for some
specific version of those, some for some specific version of flex or bison, or
some specific combination of these components, bah.
- Allow customization of clang options for BPF target, this helps building on
gentoo where there are other oddities where BPF targets gets passed some compiler
options intended for the native build, so building with WERROR=0 helps while
these oddities are fixed.
- Dont pass ERR_PTR() values to perf_session__delete() in 'perf top' and 'perf lock',
fixing some segfaults when handling some odd failures.
- Add LTO build option.
- Fix format of unordered lists in the perf docs (tools/perf/Documentation).
- Overhaul the bison files, using constructs such as YYNOMEM.
- Remove unused tokens from the bison .y files.
- Add more comments to various structs.
- A few LoongArch enablement patches.
Vendor events (JSON):
- Add JSON metrics for Yitian 710 DDR (aarch64). Things like:
EventName, BriefDescription
visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.",
visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.",
op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.",
op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.",
op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.",
- Add AmpereOne metrics (aarch64).
- Update N2 and V2 metrics (aarch64) and events using Arm telemetry repo.
- Update scale units and descriptions of common topdown metrics on aarch64. Things like:
- "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)",
- "BriefDescription": "Frontend bound L1 topdown metric",
+ "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))",
+ "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.",
- Update events for intel: meteorlake to 1.04, sapphirerapids to 1.15, Icelake+ metric constraints.
- Update files for the power10 platform.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZPfJZgAKCRCyPKLppCJ+
J1/eAP9lgtavD0V75wy1p5zyotkceOmPTkk1DYFVx2Euhxa/lAD/YW/JvuVSo0Gr
HqJP52XaV0tF8gG+YxL+Lay/Ke0P5AQ=
=d12c
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"perf tools maintainership:
- Add git information for perf-tools and perf-tools-next trees and
branches to the MAINTAINERS file. That is where development now
takes place and myself and Namhyung Kim have write access, more
people to come as we emulate other maintainer groups.
perf record:
- Record kernel data maps when 'perf record --data' is used, so that
global variables can be resolved and used in tools that do data
profiling.
perf trace:
- Remove the old, experimental support for BPF events in which a .c
file was passed as an event: "perf trace -e hello.c" to then get
compiled and loaded.
The only known usage for that, that shipped with the kernel as an
example for such events, augmented the raw_syscalls tracepoints and
was converted to a libbpf skeleton, reusing all the user space
components and the BPF code connected to the syscalls.
In the end just the way to glue the BPF part and the user space
type beautifiers changed, now being performed by libbpf skeletons.
The next step is to use BTF to do pretty printing of all syscall
types, as discussed with Alan Maguire and others.
Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all
path/filenames/strings, some of the networking data structures,
perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls
and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5
seconds:
# perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5
0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0
10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ...
? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0
3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ...
3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0
Performance counter stats for 'sleep 5':
2,617,347 cycles
1,855,997 instructions # 0.71 insn per cycle
5.002282128 seconds time elapsed
0.000855000 seconds user
0.000852000 seconds sys
perf annotate:
- Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1)
for licensing reasons, and we missed a build test on
tools/perf/tests makefile.
Since we now default to NDEBUG=1, we ended up segfaulting when
building with BUILD_NONDISTRO=1 because a needed initialization
routine was being "error checked" via an assert.
Fix it by explicitly checking the result and aborting instead if it
fails.
We better back propagate the error, but at least 'perf annotate' on
samples collected for a BPF program is back working when perf is
built with BUILD_NONDISTRO=1.
perf report/top:
- Add back TUI hierarchy mode header, that is seen when using 'perf
report/top --hierarchy'.
- Fix the number of entries for 'e' key in the TUI that was
preventing navigation of lines when expanding an entry.
perf report/script:
- Support cross platform register handling, allowing a perf.data file
collected on one architecture to have registers sampled correctly
displayed when analysis tools such as 'perf report' and 'perf
script' are used on a different architecture.
- Fix handling of event attributes in pipe mode, i.e. when one uses:
perf record -o - | perf report -i -
When no perf.data files are used.
- Handle files generated via pipe mode with a version of perf and
then read also via pipe mode with a different version of perf,
where the event attr record may have changed, use the record size
field to properly support this version mismatch.
perf probe:
- Accessing global variables from uprobes isn't supported, make the
error message state that instead of stating that some minimal
kernel version is needed to have that feature. This seems just a
tool limitation, the kernel probably has all that is needed.
perf tests:
- Fix a reference count related leak in the dlfilter v0 API where the
result of a thread__find_symbol_fb() is not matched with an
addr_location__exit() to drop the reference counts of the resolved
components (machine, thread, map, symbol, etc). Add a dlfilter test
to make sure that doesn't regresses.
- Lots of fixes for the 'perf test' written in shell script related
to problems found with the shellcheck utility.
- Fixes for 'perf test' shell scripts testing features enabled when
perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf
counters.
- Add perf record sample filtering test, things like the following
example, that gets implemented as a BPF filter attached to the
event:
# perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000'
- Improve the way the task_analyzer test checks if libtraceevent is
linked, using 'perf version --build-options' instead of the more
expensinve 'perf record -e "sched:sched_switch"'.
- Add support for riscv in the mmap-basic test. (This went as well
via the RiscV tree, same contents).
libperf:
- Implement riscv mmap support (This went as well via the RiscV tree,
same contents).
perf script:
- New tool that converts perf.data files to the firefox profiler
format so that one can use the visualizer at
https://profiler.firefox.com/. Done by Anup Sharma as part of this
year's Google Summer of Code.
One can generate the output and upload it to the web interface but
Anup also automated everything:
perf script gecko -F 99 -a sleep 60
- Support syscall name parsing on arm64.
- Print "cgroup" field on the same line as "comm".
perf bench:
- Add new 'uprobe' benchmark to measure the overhead of uprobes
with/without BPF programs attached to it.
- breakpoints are not available on power9, skip that test.
perf stat:
- Add #num_cpus_online literal to be used in 'perf stat' metrics, and
add this extra 'perf test' check that exemplifies its purpose:
TEST_ASSERT_VAL("#num_cpus_online",
expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0);
TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0);
TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online);
Miscellaneous:
- Improve tool startup time by lazily reading PMU, JSON, sysfs data.
- Improve error reporting in the parsing of events, passing YYLTYPE
to error routines, so that the output can show were the parsing
error was found.
- Add 'perf test' entries to check the parsing of events
improvements.
- Fix various leak for things detected by -fsanitize=address, mostly
things that would be freed at tool exit, including:
- Free evsel->filter on the destructor.
- Allow tools to register a thread->priv destructor and use it in
'perf trace'.
- Free evsel->priv in 'perf trace'.
- Free string returned by synthesize_perf_probe_point() when the
caller fails to do all it needs.
- Adjust various compiler options to not consider errors some
warnings when building with broken headers found in things like
python, flex, bison, as we otherwise build with -Werror. Some for
gcc, some for clang, some for some specific version of those, some
for some specific version of flex or bison, or some specific
combination of these components, bah.
- Allow customization of clang options for BPF target, this helps
building on gentoo where there are other oddities where BPF targets
gets passed some compiler options intended for the native build, so
building with WERROR=0 helps while these oddities are fixed.
- Dont pass ERR_PTR() values to perf_session__delete() in 'perf top'
and 'perf lock', fixing some segfaults when handling some odd
failures.
- Add LTO build option.
- Fix format of unordered lists in the perf docs
(tools/perf/Documentation)
- Overhaul the bison files, using constructs such as YYNOMEM.
- Remove unused tokens from the bison .y files.
- Add more comments to various structs.
- A few LoongArch enablement patches.
Vendor events (JSON):
- Add JSON metrics for Yitian 710 DDR (aarch64). Things like:
EventName, BriefDescription
visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.",
visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.",
op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.",
op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.",
op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.",
- Add AmpereOne metrics (aarch64).
- Update N2 and V2 metrics (aarch64) and events using Arm telemetry
repo.
- Update scale units and descriptions of common topdown metrics on
aarch64. Things like:
- "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)",
- "BriefDescription": "Frontend bound L1 topdown metric",
+ "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))",
+ "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.",
- Update events for intel: meteorlake to 1.04, sapphirerapids to
1.15, Icelake+ metric constraints.
- Update files for the power10 platform"
* tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits)
perf parse-events: Fix driver config term
perf parse-events: Fixes relating to no_value terms
perf parse-events: Fix propagation of term's no_value when cloning
perf parse-events: Name the two term enums
perf list: Don't print Unit for "default_core"
perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake
perf dlfilter: Avoid leak in v0 API test use of resolve_address()
perf metric: Add #num_cpus_online literal
perf pmu: Remove str from perf_pmu_alias
perf parse-events: Make common term list to strbuf helper
perf parse-events: Minor help message improvements
perf pmu: Avoid uninitialized use of alias->str
perf jevents: Use "default_core" for events with no Unit
perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test
perf test shell stat_bpf_counters: Fix test on Intel
perf test shell record_bpf_filter: Skip 6.2 kernel
libperf: Get rid of attr.id field
perf tools: Convert to perf_record_header_attr_id()
libperf: Add perf_record_header_attr_id()
perf tools: Handle old data in PERF_RECORD_ATTR
...
* The kernel now dynamically probes for misaligned access speed, as
opposed to relying on a table of known implementations.
* Support for non-coherent devices on systems using the Andes AX45MP
core, including the RZ/Five SoCs.
* Support for the V extension in ptrace(), again.
* Support for KASLR.
* Support for the BPF prog pack allocator in RISC-V.
* A handful of bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=s89m
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- The kernel now dynamically probes for misaligned access speed, as
opposed to relying on a table of known implementations.
- Support for non-coherent devices on systems using the Andes AX45MP
core, including the RZ/Five SoCs.
- Support for the V extension in ptrace(), again.
- Support for KASLR.
- Support for the BPF prog pack allocator in RISC-V.
- A handful of bug fixes and cleanups.
* tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits)
soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met
riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config
riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config
riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled
bpf, riscv: use prog pack allocator in the BPF JIT
riscv: implement a memset like function for text
riscv: extend patch_text_nosync() for multiple pages
bpf: make bpf_prog_pack allocator portable
riscv: libstub: Implement KASLR by using generic functions
libstub: Fix compilation warning for rv32
arm64: libstub: Move KASLR handling functions to kaslr.c
riscv: Dump out kernel offset information on panic
riscv: Introduce virtual kernel mapping KASLR
RISC-V: Add ptrace support for vectors
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
...
A collection of fixes for 6.6-rc1. All small and easy ones.
- The corrections of the previous PCM iov_iter transitions
- Regression fixes in MIDI 2.0 / USB changes
- Various ASoC codec fixes for Cirrus, Realtek, WCD
- ASoC AMD quirks and ASoC Intel AVS driver workaround
-----BEGIN PGP SIGNATURE-----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=txoJ
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes for 6.6-rc1. All small and easy ones.
- The corrections of the previous PCM iov_iter transitions
- Regression fixes in MIDI 2.0 / USB changes
- Various ASoC codec fixes for Cirrus, Realtek, WCD
- ASoC AMD quirks and ASoC Intel AVS driver workaround"
* tag 'sound-fix-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: hda/realtek - ALC287 I2S speaker platform support
ASoC: amd: yc: Fix a non-functional mic on Lenovo 82TL
ASoC: Intel: avs: Provide support for fallback topology
ALSA: seq: Fix snd_seq_expand_var_event() call to user-space
ALSA: usb-audio: Fix potential memory leaks at error path for UMP open
ALSA: hda/cirrus: Fix broken audio on hardware with two CS42L42 codecs.
ASoC: rt5645: NULL pointer access when removing jack
ASoC: amd: yc: Add DMI entries to support Victus by HP Gaming Laptop 15-fb0xxx (8A3E)
MAINTAINERS: Update the MAINTAINERS enties for TEXAS INSTRUMENTS ASoC DRIVERS
ALSA: sb: Fix wrong argument in commented code
ALSA: pcm: Fix error checks of default read/write copy ops
ASoC: Name iov_iter argument as iterator instead of buffer
ASoC: dmaengine: Drop unused iov_iter for process callback
ALSA: hda/tas2781: Use standard clamp() macro
ASoC: cs35l56: Waiting for firmware to boot must be tolerant of I/O errors
ASoC: dt-bindings: fsl_easrc: Add support for imx8mp-easrc
ASoC: cs42l43: Fix missing error code in cs42l43_codec_probe()
ASoC: cs35l45: Rename DACPCM1 Source control
ASoC: cs35l45: Fix "Dead assigment" warning
ASoC: cs35l45: Add support for Chip ID 0x35A460
...
Prabhakar <prabhakar.csengg@gmail.com> says:
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
non-coherent DMA support for AX45MP
====================================
On the Andes AX45MP core, cache coherency is a specification option so it
may not be supported. In this case DMA will fail. To get around with this
issue this patch series does the below:
1] Andes alternative ports is implemented as errata which checks if the
IOCP is missing and only then applies to CMO errata. One vendor specific
SBI EXT (ANDES_SBI_EXT_IOCP_SW_WORKAROUND) is implemented as part of
errata.
Below are the configs which Andes port provides (and are selected by
RZ/Five):
- ERRATA_ANDES
- ERRATA_ANDES_CMO
OpenSBI patch supporting ANDES_SBI_EXT_IOCP_SW_WORKAROUND SBI is now
part v1.3 release.
2] Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
OpenSBI configures the PMA regions as required and creates a reserve memory
node and propagates it to the higher boot stack.
Currently OpenSBI (upstream) configures the required PMA region and passes
this a shared DMA pool to Linux.
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
pma_resv0@58000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x58000000 0x0 0x08000000>;
no-map;
linux,dma-default;
};
};
The above shared DMA pool gets appended to Linux DTB so the DMA memory
requests go through this region.
3] We provide callbacks to synchronize specific content between memory and
cache.
4] RZ/Five SoC selects the below configs
- AX45MP_L2_CACHE
- DMA_GLOBAL_POOL
- ERRATA_ANDES
- ERRATA_ANDES_CMO
----------x---------------------x--------------------x---------------x----
* b4-shazam-merge:
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
Link: https://lore.kernel.org/r/20230818135723.80612-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Subsystem:
- Add a way for drivers to tell the core the supported alarm range is smaller
than the date range. This is not used yet but will be useful for the
alarmtimers in the next release.
- fix Wvoid-pointer-to-enum-cast warnings
- remove redundant of_match_ptr()
- stop warning for invalid alarms when the alarm is disabled
Drivers:
- isl12022: allow setting the trip level for battery level detection
- pcf2127: add support for PCF2131 and multiple timestamps
- stm32: time precision improvement, many fixes
- twl: NVRAM support
-----BEGIN PGP SIGNATURE-----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=4kkJ
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- Add a way for drivers to tell the core the supported alarm range is
smaller than the date range. This is not used yet but will be
useful for the alarmtimers in the next release.
- fix Wvoid-pointer-to-enum-cast warnings
- remove redundant of_match_ptr()
- stop warning for invalid alarms when the alarm is disabled
Drivers:
- isl12022: allow setting the trip level for battery level detection
- pcf2127: add support for PCF2131 and multiple timestamps
- stm32: time precision improvement, many fixes
- twl: NVRAM support"
* tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (73 commits)
dt-bindings: rtc: ds3231: Remove text binding
rtc: wm8350: remove unnecessary messages
rtc: twl: remove unnecessary messages
rtc: sun6i: remove unnecessary message
rtc: stop warning for invalid alarms when the alarm is disabled
rtc: twl: add NVRAM support
rtc: pcf85363: Allow to wake up system without IRQ
rtc: m48t86: add DT support for m48t86
dt-bindings: rtc: Add ST M48T86
rtc: pcf2127: remove useless check
rtc: rzn1: Report maximum alarm limit to rtc core
rtc: ds1305: Report maximum alarm limit to rtc core
rtc: tps6586x: Report maximum alarm limit to rtc core
rtc: cmos: Report supported alarm limit to rtc infrastructure
rtc: cros-ec: Detect and report supported alarm window size
rtc: Add support for limited alarm timer offsets
rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb()
MAINTAINERS: remove obsolete pattern in RTC SUBSYSTEM section
rtc: tps65910: Remove redundant dev_warn() and do not check for 0 return after calling platform_get_irq()
rtc: omap: Do not check for 0 return after calling platform_get_irq()
...
* Clean up vCPU targets, always returning generic v8 as the preferred target
* Trap forwarding infrastructure for nested virtualization (used for traps
that are taken from an L2 guest and are needed by the L1 hypervisor)
* FEAT_TLBIRANGE support to only invalidate specific ranges of addresses
when collapsing a table PTE to a block PTE. This avoids that the guest
refills the TLBs again for addresses that aren't covered by the table PTE.
* Fix vPMU issues related to handling of PMUver.
* Don't unnecessary align non-stack allocations in the EL2 VA space
* Drop HCR_VIRT_EXCP_MASK, which was never used...
* Don't use smp_processor_id() in kvm_arch_vcpu_load(),
but the cpu parameter instead
* Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
* Remove prototypes without implementations
RISC-V:
* Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
* Added ONE_REG interface for SATP mode
* Added ONE_REG interface to enable/disable multiple ISA extensions
* Improved error codes returned by ONE_REG interfaces
* Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
* Added get-reg-list selftest for KVM RISC-V
s390:
* PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
* Guest debug fixes (Ilya)
x86:
* Clean up KVM's handling of Intel architectural events
* Intel bugfixes
* Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use debug
registers and generate/handle #DBs
* Clean up LBR virtualization code
* Fix a bug where KVM fails to set the target pCPU during an IRTE update
* Fix fatal bugs in SEV-ES intrahost migration
* Fix a bug where the recent (architecturally correct) change to reinject
#BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
* Retry APIC map recalculation if a vCPU is added/enabled
* Overhaul emergency reboot code to bring SVM up to par with VMX, tie the
"emergency disabling" behavior to KVM actually being loaded, and move all of
the logic within KVM
* Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC
ratio MSR cannot diverge from the default when TSC scaling is disabled
up related code
* Add a framework to allow "caching" feature flags so that KVM can check if
the guest can use a feature without needing to search guest CPUID
* Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
* Fix KVM's handling of !visible guest roots to avoid premature triple fault
injection
* Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the API surface
that is needed by external users (currently only KVMGT), and fix a variety
of issues in the process
This last item had a silly one-character bug in the topic branch that
was sent to me. Because it caused pretty bad selftest failures in
some configurations, I decided to squash in the fix. So, while the
exact commit ids haven't been in linux-next, the code has (from the
kvm-x86 tree).
Generic:
* Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
action specific data without needing to constantly update the main handlers.
* Drop unused function declarations
Selftests:
* Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
* Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
* Clean up the PMU event filter test and add new testcases
* Include x86 selftests in the KVM x86 MAINTAINERS entry
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT1m0kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMNgggAiN7nz6UC423FznuI+yO3TLm8tkx1
CpKh5onqQogVtchH+vrngi97cfOzZb1/AtifY90OWQi31KEWhehkeofcx7G6ERhj
5a9NFADY1xGBsX4exca/VHDxhnzsbDWaWYPXw5vWFWI6erft9Mvy3tp1LwTvOzqM
v8X4aWz+g5bmo/DWJf4Wu32tEU6mnxzkrjKU14JmyqQTBawVmJ3RYvHVJ/Agpw+n
hRtPAy7FU6XTdkmq/uCT+KUHuJEIK0E/l1js47HFAqSzwdW70UDg14GGo1o4ETxu
RjZQmVNvL57yVgi6QU38/A0FWIsWQm5IlaX1Ug6x8pjZPnUKNbo9BY4T1g==
=W+4p
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Clean up vCPU targets, always returning generic v8 as the preferred
target
- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)
- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.
- Fix vPMU issues related to handling of PMUver.
- Don't unnecessary align non-stack allocations in the EL2 VA space
- Drop HCR_VIRT_EXCP_MASK, which was never used...
- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead
- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
- Remove prototypes without implementations
RISC-V:
- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V
s390:
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
x86:
- Clean up KVM's handling of Intel architectural events
- Intel bugfixes
- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE
update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)
- Retry APIC map recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code
- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID
- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection
- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process
Generic:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.
- Drop unused function declarations
Selftests:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...
- Fix a glock state (non-)transition bug when a dlm request times out
and is canceled, and we have locking requests that can now be granted
immediately.
- Various fixes and cleanups in how the logd and quotad daemons are
woken up and terminated.
- Fix several bugs in the quota data reference counting and shrinking.
Free quota data objects synchronously in put_super() instead of
letting call_rcu() run wild.
- Make sure not to deallocate quota data during a withdraw; rather, defer
quota data deallocation to put_super(). Withdraws can happen in
contexts in which callers on the stack are holding quota data references.
- Many minor quota fixes and cleanups by Bob.
- Update the the mailing list address for gfs2 and dlm. (It's the same
list for both and we are moving it to gfs2@lists.linux.dev.)
- Various other minor cleanups.
-----BEGIN PGP SIGNATURE-----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=EonA
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v6.5-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Fix a glock state (non-)transition bug when a dlm request times out
and is canceled, and we have locking requests that can now be granted
immediately
- Various fixes and cleanups in how the logd and quotad daemons are
woken up and terminated
- Fix several bugs in the quota data reference counting and shrinking.
Free quota data objects synchronously in put_super() instead of
letting call_rcu() run wild
- Make sure not to deallocate quota data during a withdraw; rather,
defer quota data deallocation to put_super(). Withdraws can happen in
contexts in which callers on the stack are holding quota data
references
- Many minor quota fixes and cleanups by Bob
- Update the the mailing list address for gfs2 and dlm. (It's the same
list for both and we are moving it to gfs2@lists.linux.dev)
- Various other minor cleanups
* tag 'gfs2-v6.5-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (51 commits)
MAINTAINERS: Update dlm mailing list
MAINTAINERS: Update gfs2 mailing list
gfs2: change qd_slot_count to qd_slot_ref
gfs2: check for no eligible quota changes
gfs2: Remove useless assignment
gfs2: simplify slot_get
gfs2: Simplify qd2offset
gfs2: introduce qd_bh_get_or_undo
gfs2: Remove quota allocation info from quota file
gfs2: use constant for array size
gfs2: Set qd_sync_gen in do_sync
gfs2: Remove useless err set
gfs2: Small gfs2_quota_lock cleanup
gfs2: move qdsb_put and reduce redundancy
gfs2: improvements to sysfs status
gfs2: Don't try to sync non-changes
gfs2: Simplify function need_sync
gfs2: remove unneeded pg_oflow variable
gfs2: remove unneeded variable done
gfs2: pass sdp to gfs2_write_buf_to_page
...
- Enable -Wenum-conversion warning option
- Refactor the rpm-pkg target
- Fix scripts/setlocalversion to consider annotated tags for rt-kernel
- Add a jump key feature for the search menu of 'make nconfig'
- Support Qt6 for 'make xconfig'
- Enable -Wformat-overflow, -Wformat-truncation, -Wstringop-overflow, and
-Wrestrict warnings for W=1 builds
- Replace <asm/export.h> with <linux/export.h> for alpha, ia64, and sparc
- Support DEB_BUILD_OPTIONS=parallel=N for the debian source package
- Refactor scripts/Makefile.modinst and fix some modules_sign issues
- Add a new Kconfig env variable to warn symbols that are not defined anywhere
- Show help messages of config fragments in 'make help'
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmT3X/oVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsG58oQAIXDrka3r53Flky/uJjSl8ab620o
XL3u4PF/ekv6qsZoLlU24WQP8BzcJO6gPHFz88mE9/J1+wHpNKZLZehjpgj1cCY3
LatbEAa3DCZPC/c7P/nz+FT4mjTZpKOeQmvZVfA+xonBHmTyVUKgws0uDB/xuTjE
GARyOX7ymD0AAZv84SUUCiaBe5Y2Bkrki67HfteS4bxW8GHg0rZWzrFUUkEkoG54
elNOYR0WYROwyo8Iokd2MedVdK2SPZxvY8i67hXl2K+Qve6tLNk8dbRIENnYI0pk
7oQVmIfC20eu9CteywHlyjt8jpTOeIrRc2yhJKR0YrjjIzKhulRGMh+pFAAwoySd
Se60uWCS2AydcXWTrtb+iwFUyM2zRK4SaMlxleqnoE/bWYp6jhg9qbV9xpztWSYI
j39k9aX7B19stN1drzJeyXdILRVtaAQCcax3RR+mGgm4Z5fuTDntPepvIv8J3lBg
QZ4MCdOdtFw33eQaKa7O3LddD3q1X355xeaIITivEe3rAk5iIJYu3Ty1VY+/XTcH
ktSVl83zQ5Ge3tvx8D6kCR9J8jAQyTLIKHxvr/j969HgZKguS2i37eChnPyKcu23
ZMKJcmCJ1O7naQXVrb/TeiaMR0UEo/PSdrUjpEO3LlMpRthNXLVSLfgJGv8WLO7/
pb/HFXHgKaSORiRV
=lfUi
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Enable -Wenum-conversion warning option
- Refactor the rpm-pkg target
- Fix scripts/setlocalversion to consider annotated tags for rt-kernel
- Add a jump key feature for the search menu of 'make nconfig'
- Support Qt6 for 'make xconfig'
- Enable -Wformat-overflow, -Wformat-truncation, -Wstringop-overflow,
and -Wrestrict warnings for W=1 builds
- Replace <asm/export.h> with <linux/export.h> for alpha, ia64, and
sparc
- Support DEB_BUILD_OPTIONS=parallel=N for the debian source package
- Refactor scripts/Makefile.modinst and fix some modules_sign issues
- Add a new Kconfig env variable to warn symbols that are not defined
anywhere
- Show help messages of config fragments in 'make help'
* tag 'kbuild-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (62 commits)
kconfig: fix possible buffer overflow
kbuild: Show marked Kconfig fragments in "help"
kconfig: add warn-unknown-symbols sanity check
kbuild: dummy-tools: make MPROFILE_KERNEL checks work on BE
Documentation/llvm: refresh docs
modpost: Skip .llvm.call-graph-profile section check
kbuild: support modules_sign for external modules as well
kbuild: support 'make modules_sign' with CONFIG_MODULE_SIG_ALL=n
kbuild: move more module installation code to scripts/Makefile.modinst
kbuild: reduce the number of mkdir calls during modules_install
kbuild: remove $(MODLIB)/source symlink
kbuild: move depmod rule to scripts/Makefile.modinst
kbuild: add modules_sign to no-{compiler,sync-config}-targets
kbuild: do not run depmod for 'make modules_sign'
kbuild: deb-pkg: support DEB_BUILD_OPTIONS=parallel=N in debian/rules
alpha: remove <asm/export.h>
alpha: replace #include <asm/export.h> with #include <linux/export.h>
ia64: remove <asm/export.h>
ia64: replace #include <asm/export.h> with #include <linux/export.h>
sparc: remove <asm/export.h>
...
- Also a number of singleton patches, mainly cleanups and leftovers.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZPZGXwAKCRDdBJ7gKXxA
jkjpAP9F0t5xy3JGs8Iew47Yqva+fvvrZdUSx3aHIZ/C3HyaJwEAi7DwzqludyHi
851+qSdyX3bWnDEuejuNeMykh2QF1wo=
=pw9A
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-09-04-14-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- Stefan Roesch has added ksm statistics to /proc/pid/smaps
- Also a number of singleton patches, mainly cleanups and leftovers
* tag 'mm-stable-2023-09-04-14-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/kmemleak: move up cond_resched() call in page scanning loop
mm: page_alloc: remove stale CMA guard code
MAINTAINERS: add rmap.h to mm entry
rmap: remove anon_vma_link() nommu stub
proc/ksm: add ksm stats to /proc/pid/smaps
mm/hwpoison: rename hwp_walk* to hwpoison_walk*
mm: memory-failure: add PageOffline() check
The new gfs2@ list will also be used for dlm development.
Signed-off-by: Andrew Price <anprice@redhat.com>
Acked-by: David Teigland <teigland@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
- Check if the Tegra BPMP supports the trip points in order to set the
.set_trips callback (Mikko Perttunen).
- Add new Loongson-2 thermal sensor along with the DT bindings (Yinbo
Zhu).
- Use IS_ERR_OR_NULL() helper to replace a double test on the TI
bandgap sensor (Li Zetao).
- Remove redundant platform_set_drvdata() calls, as there are no
corresponding calls to platform_get_drvdata(), from a bunch of
drivers (Andrei Coardos).
- Switch the Mediatek LVTS mode to filtered in order to enable
interrupts (Nícolas F. R. A. Prado).
- Fix Wvoid-pointer-to-enum-cast warning on the Exynos TMU (Krzysztof
Kozlowski).
- Remove redundant dev_err_probe(), because the underlying function
already called it, from the Mediatek sensor (Chen Jiahao).
- Free calibration nvmem after reading it on sun8i (Mark Brown).
- Remove useless comment from the sun8i driver (Yangtao Li).
- Make tsens_xxxx_nvmem static to fix a sparse warning on QCom
tsens (Min-Hua Chen).
- Remove error message at probe deferral on imx8mm (Ahmad Fatoum).
- Fix parameter check in lvts_debugfs_init() with IS_ERR() on
Mediatek LVTS (Minjie Du).
- Fix interrupt routine and configuratoin for Mediatek LVTS (Nícolas
F. R. A. Prado).
- Drop unused .get_trip_type(), .get_trip_temp() and .get_trip_hyst()
thermal zone callbacks from the core and rework the .get_trend()
one to take a trip point pointer as an argument (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmT2DnQSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxB5MQAIcrHQWoI7dTwLIchSbWhsfkm3dAy4nS
CyLexkli5wCxbsdg2B2ATqBP4ttyB3Jbe7rWqI6+a/CUrtvyOxM0wmNp/wXI1u/C
YC3T2uRMhODRvxueQrbrrSA/t/u7QiFCdyXuMyRYzwyxibc4bMKuyLcZ6VrckTRH
fy3QvnIIXhBsox97KccXsqaKWzZgi2BaJVA+29l8ikH8IcTwdfGmTrty2z3KiVc8
jk8WiMSkITPWST/CbCCFojjYABbBSQ1tKnDBDCYdDos2BFqiPDr7cdaVa6iTt+BD
baa5ZseMcCdxSMqi2uvnwI3OCkVRGL4WKCYthTNOKjxfqyKhMI91R5Yayqn3B73P
qYcEujVYoeFRzSrQh4luLBr+vcOatvl5woO5PpfSL18d0sPVM3bbwCcm5ovSXUJy
YWp1Wi7ra/bP7EHiMQHII6Y+vGi386GbAunKdV/548r+aoy2wS/WKghsT3pbq4LQ
E93r4jPcefP9Q9Re3IHE77TE1BvQ01wD/ZBwFy07oUGYD9a1CSA0vm90KHEb/5kr
8Ub29RPsP3ltvRFj35abHu1fBtdIoBwT8J2GblwzYpJJ1v29h1elzuUXcJh1pTvZ
HgbgBs4dj3jWIg81WVnoTKMqAuNyGNFTzzYk1yX+tCMx10/TLBj6HmxwI/HXyipC
+0WFLGpURP1F
=I19o
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These are mostly updates of thermal control drivers for ARM platforms,
new thermal control support for Loongson-2 and a couple of core
cleanups made possible by recent changes merged previously.
Specifics:
- Check if the Tegra BPMP supports the trip points in order to set
the .set_trips callback (Mikko Perttunen)
- Add new Loongson-2 thermal sensor along with the DT bindings (Yinbo
Zhu)
- Use IS_ERR_OR_NULL() helper to replace a double test on the TI
bandgap sensor (Li Zetao)
- Remove redundant platform_set_drvdata() calls, as there are no
corresponding calls to platform_get_drvdata(), from a bunch of
drivers (Andrei Coardos)
- Switch the Mediatek LVTS mode to filtered in order to enable
interrupts (Nícolas F. R. A. Prado)
- Fix Wvoid-pointer-to-enum-cast warning on the Exynos TMU (Krzysztof
Kozlowski)
- Remove redundant dev_err_probe(), because the underlying function
already called it, from the Mediatek sensor (Chen Jiahao)
- Free calibration nvmem after reading it on sun8i (Mark Brown)
- Remove useless comment from the sun8i driver (Yangtao Li)
- Make tsens_xxxx_nvmem static to fix a sparse warning on QCom tsens
(Min-Hua Chen)
- Remove error message at probe deferral on imx8mm (Ahmad Fatoum)
- Fix parameter check in lvts_debugfs_init() with IS_ERR() on
Mediatek LVTS (Minjie Du)
- Fix interrupt routine and configuratoin for Mediatek LVTS (Nícolas
F. R. A. Prado)
- Drop unused .get_trip_type(), .get_trip_temp() and .get_trip_hyst()
thermal zone callbacks from the core and rework the .get_trend()
one to take a trip point pointer as an argument (Rafael Wysocki)"
* tag 'thermal-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits)
thermal: core: Rework .get_trend() thermal zone callback
thermal: core: Drop unused .get_trip_*() callbacks
thermal/drivers/tegra-bpmp: Check if BPMP supports trip points
thermal: dt-bindings: add loongson-2 thermal
thermal/drivers/loongson-2: Add thermal management support
thermal/drivers/ti-soc-thermal: Use helper function IS_ERR_OR_NULL()
thermal/drivers/generic-adc: Removed unneeded call to platform_set_drvdata()
thermal/drivers/max77620_thermal: Removed unneeded call to platform_set_drvdata()
thermal/drivers/mediatek/auxadc_thermal: Removed call to platform_set_drvdata()
thermal/drivers/sun8i_thermal: Remove unneeded call to platform_set_drvdata()
thermal/drivers/broadcom/brcstb_thermal: Removed unneeded platform_set_drvdata()
thermal/drivers/mediatek/lvts_thermal: Make readings valid in filtered mode
thermal/drivers/k3_bandgap: Remove unneeded call to platform_set_drvdata()
thermal/drivers/k3_j72xx_bandgap: Removed unneeded call to platform_set_drvdata()
thermal/drivers/broadcom/sr-thermal: Removed call to platform_set_drvdata()
thermal/drivers/samsung: Fix Wvoid-pointer-to-enum-cast warning
thermal/drivers/db8500: Remove redundant of_match_ptr()
thermal/drivers/mediatek: Clean up redundant dev_err_probe()
thermal/drivers/sun8i: Free calibration nvmem after reading it
thermal/drivers/sun8i: Remove unneeded comments
...
- Add support for the Cirrus Logic CS42L43 Audio CODEC
- Fix-ups
- Make use of specific printk() format tags for various optimisations
- Kconfig / module modifications / tweaking
- Simplify obtaining resources (memory, device data) using unified API helpers
- Bunch of Device Tree additions, conversions and adaptions
- Convert a bunch of Regmap configurations to use the Maple Tree cache
- Ensure correct includes are present and remove some that are not required
- Remove superfluous code
- Reduce amount of cycles spent in critical sections
- Omit the use of redundant casts and if relevant replace with better ones
- Swap out raw_spin_{un}lock_irq{save,restore}() for spin_{un}lock_irq{save,restore}()
- Bug Fixes
- Repair theoretical deadlock situation
- Fix some link-time dependencies
- Use more appropriate datatype when casting
-----BEGIN PGP SIGNATURE-----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=MNYe
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull NFD updates from Lee Jones:
"New Drivers:
- Add support for the Cirrus Logic CS42L43 Audio CODEC
Fix-ups:
- Make use of specific printk() format tags for various optimisations
- Kconfig / module modifications / tweaking
- Simplify obtaining resources (memory, device data) using unified
API helpers
- Bunch of Device Tree additions, conversions and adaptions
- Convert a bunch of Regmap configurations to use the Maple Tree
cache
- Ensure correct includes are present and remove some that are not
required
- Remove superfluous code
- Reduce amount of cycles spent in critical sections
- Omit the use of redundant casts and if relevant replace with better
ones
- Swap out raw_spin_{un}lock_irq{save,restore}() for
spin_{un}lock_irq{save,restore}()
Bug Fixes:
- Repair theoretical deadlock situation
- Fix some link-time dependencies
- Use more appropriate datatype when casting"
* tag 'mfd-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (70 commits)
mfd: mc13xxx: Simplify device data fetching in probe()
mfd: rz-mtu3: Replace raw_spin_lock->spin_lock()
mfd: rz-mtu3: Reduce critical sections
mfd: mxs-lradc: Fix Wvoid-pointer-to-enum-cast warning
mfd: wm31x: Fix Wvoid-pointer-to-enum-cast warning
mfd: wm8994: Fix Wvoid-pointer-to-enum-cast warning
mfd: tc3589: Fix Wvoid-pointer-to-enum-cast warning
mfd: lp87565: Fix Wvoid-pointer-to-enum-cast warning
mfd: hi6421-pmic: Fix Wvoid-pointer-to-enum-cast warning
mfd: max77541: Fix Wvoid-pointer-to-enum-cast warning
mfd: max14577: Fix Wvoid-pointer-to-enum-cast warning
mfd: stmpe: Fix Wvoid-pointer-to-enum-cast warning
mfd: rn5t618: Remove redundant of_match_ptr()
mfd: lochnagar-i2c: Remove redundant of_match_ptr()
mfd: stpmic1: Remove redundant of_match_ptr()
mfd: act8945a: Remove redundant of_match_ptr()
mfd: rsmu_spi: Remove redundant of_match_ptr()
mfd: altera-a10sr: Remove redundant of_match_ptr()
mfd: rsmu_i2c: Remove redundant of_match_ptr()
mfd: tc3589x: Remove redundant of_match_ptr()
...
-----BEGIN PGP SIGNATURE-----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=D7ZU
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Do not try to get the console lock when it is not need or useful in
panic()
- Replace the global console_suspended state by a per-console flag
- Export symbols needed for dumping the raw printk buffer in panic()
- Fix documentation of printf formats for integer types
- Moved Sergey Senozhatsky to the reviewer role
- Misc cleanups
* tag 'printk-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: export symbols for debug modules
lib: test_scanf: Add explicit type cast to result initialization in test_number_prefix()
printk: ringbuffer: Fix truncating buffer size min_t cast
printk: Rename abandon_console_lock_in_panic() to other_cpu_in_panic()
printk: Add per-console suspended state
printk: Consolidate console deferred printing
printk: Do not take console lock for console_flush_on_panic()
printk: Keep non-panic-CPUs out of console lock
printk: Reduce console_unblank() usage in unsafe scenarios
kdb: Do not assume write() callback available
docs: printk-formats: Treat char as always unsigned
docs: printk-formats: Fix hex printing of signed values
MAINTAINERS: adjust printk/vsprintf entries
* Per-cpu cpu usage stats are now tracked. This currently isn't printed out
in the cgroupfs interface and can only be accessed through e.g. BPF.
Should decide on a not-too-ugly way to show per-cpu stats in cgroupfs.
* cpuset received some cleanups and prepatory patches for the pending
cpus.exclusive patchset which will allow cpuset partitions to be created
below non-partition parents, which should ease the management of partition
cpusets.
* A lot of code and documentation cleanup patches.
* tools/testing/selftests/cgroup/test_cpuset.c is added. This causes trivial
conflicts in .gitignore and Makefile under the directory against
fe3b1bf19b ("selftests: cgroup: add test_zswap program"). They can be
resolved by keeping lines from both branches.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZPENTg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGcyBAP44cHwpSFxXe3cehxAzb1l/2BZXtzU5l48OqUQd
MwHyrwEAm7+MTVAR2xOF4f+oVM9KWmKj7oV7Clpixl1S7hHyjwE=
=FCc9
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Per-cpu cpu usage stats are now tracked
This currently isn't printed out in the cgroupfs interface and can
only be accessed through e.g. BPF. Should decide on a not-too-ugly
way to show per-cpu stats in cgroupfs
- cpuset received some cleanups and prepatory patches for the pending
cpus.exclusive patchset which will allow cpuset partitions to be
created below non-partition parents, which should ease the management
of partition cpusets
- A lot of code and documentation cleanup patches
- tools/testing/selftests/cgroup/test_cpuset.c added
* tag 'cgroup-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (32 commits)
cgroup: Avoid -Wstringop-overflow warnings
cgroup:namespace: Remove unused cgroup_namespaces_init()
cgroup/rstat: Record the cumulative per-cpu time of cgroup and its descendants
cgroup: clean up if condition in cgroup_pidlist_start()
cgroup: fix obsolete function name in cgroup_destroy_locked()
Documentation: cgroup-v2.rst: Correct number of stats entries
cgroup: fix obsolete function name above css_free_rwork_fn()
cgroup/cpuset: fix kernel-doc
cgroup: clean up printk()
cgroup: fix obsolete comment above cgroup_create()
docs: cgroup-v1: fix typo
docs: cgroup-v1: correct the term of Page Cache organization in inode
cgroup/misc: Store atomic64_t reads to u64
cgroup/misc: Change counters to be explicit 64bit types
cgroup/misc: update struct members descriptions
cgroup: remove cgrp->kn check in css_populate_dir()
cgroup: fix obsolete function name
cgroup: use cached local variable parent in for loop
cgroup: remove obsolete comment above struct cgroupstats
cgroup: put cgroup_tryget_css() inside CONFIG_CGROUP_SCHED
...
-----BEGIN PGP SIGNATURE-----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=24SV
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2023083101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- devm fixes for problems that caused use-after-free reports (Rahul
Rameshbabu)
- Some extensive HID docs (Marco Morandini)
- Constification of struct class (Ivan Orlov and Greg Kroah-Hartman)
- Google Stadia Force Feedback support (Fabio Baltieri)
- Various fixes and new device ID support
* tag 'for-linus-2023083101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (42 commits)
HID: logitech-hidpp: rework one more time the retries attempts
HID: nvidia-shield: Reference hid_device devm allocation of input_dev name
HID: multitouch: Correct devm device reference for hidinput input_dev name
HID: uclogic: Correct devm device reference for hidinput input_dev name
HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()
HID: i2c-hid: elan: Add ili9882t timing
dt-bindings: input: i2c-hid: Introduce Ilitek ili9882t
HID: apple: Add "Hailuck" to the list of non-apple keyboards
HID: steelseries: arctis_1_battery_request[] should be static
MAINTAINERS: update my email address
HID: logitech-hidpp: Add support for Logitech MX Anywhere 3 mouse
HID: wacom: struct name cleanup
HID: wacom: remove unnecessary 'connected' variable from EKR
HID: wacom: remove the battery when the EKR is off
HID: nvidia-shield: Update Thunderstrike LED instance name to use id
HID: nvidia-shield: Add battery support for Thunderstrike
HID: nvidia-shield: Remove led_classdev_unregister in thunderstrike_create
HID: hid-google-stadiaff: add support for Stadia force feedback
HID: logitech-dj: Add support for a new lightspeed receiver iteration
HID: logitech-hidpp: Add support for the Pro X Superlight
...
-----BEGIN PGP SIGNATURE-----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=yuz5
-----END PGP SIGNATURE-----
Merge tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9719, ds90ub913
- new Intel IVSC MEI drivers
- some Mediatek platform drivers were moved to a common location
- Intel atomisp2 driver is now working with the main ov2680 driver. Due
to that, the atomisp2 ov2680 staging one was removed
- the bttv driver was finally converted to videobuf2 framework. This
was the last one upstream using videobuf version 1 core. We'll likely
remove the old videobuf framework on 6.7
- lots of improvements at atomisp driver: it now works with normal I2C
sensors. Several compile-mode dependecies to select between ISP2400
and ISP2401 are now solved in runtime
- a new ipu-bridge logic was added to work with IVSC MEI drivers
- venus driver gained better support for new VPU versions
- the v4l core async framework has gained lots of improvements and
cleanups
- lots of other cleanups, improvements and driver fixes
* tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (358 commits)
media: ivsc: Add ACPI dependency
media: bttv: convert to vb2
media: bttv: use audio defaults for winfast2000
media: bttv: refactor bttv_set_dma()
media: bttv: move vbi_skip/vbi_count out of buffer
media: bttv: remove crop info from bttv_buffer
media: bttv: remove tvnorm field from bttv_buffer
media: bttv: remove format field from bttv_buffer
media: bttv: move do_crop flag out of bttv_fh
media: bttv: copy vbi_fmt from bttv_fh
media: bttv: copy vid fmt/width/height from fh
media: bttv: radio use v4l2_fh instead of bttv_fh
media: bttv: replace BUG with WARN_ON
media: bttv: use video_drvdata to get bttv
media: i2c: rdacm21: Fix uninitialized value
media: coda: Remove duplicated include
media: vivid: fix the racy dev->radio_tx_rds_owner
media: i2c: ccs: Check rules is non-NULL
media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate
media: i2c: ds90ub953: Fix use of uninitialized variables
...
Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH64g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynr2QCfd3RKeR+WnGzyEOFhksl30UJJhiIAoNZtYT5+
t9KG0iMDXRuTsOqeEQbd
=tVnk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
nvmem: core: Notify when a new layout is registered
nvmem: core: Do not open-code existing functions
nvmem: core: Return NULL when no nvmem layout is found
nvmem: core: Create all cells before adding the nvmem device
nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
dt-bindings: nvmem: Add compatible for QCM2290
nvmem: Kconfig: Fix typo "drive" -> "driver"
nvmem: Explicitly include correct DT includes
nvmem: add new NXP QorIQ eFuse driver
dt-bindings: nvmem: Add t1023-sfp efuse support
dt-bindings: nvmem: qfprom: Add compatible for MSM8226
nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
nvmem: qfprom: do some cleanup
nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
...
Highlights:
- hp-bioscfg: New firmware-attributes driver for changing BIOS settings
from within Linux
- asus-wmi: Add charger mode, middle fan and eGPU settings support
- ideapad: Support keyboard backlight control on more models
- mellanox: Support for new models
- sel-3350: New LED and power-supply driver for this industrial mainboard
- simatic-ipc: Add RTC battery monitor and various new models support
- Miscellaneous other cleanups / fixes
The following is an automated git shortlog grouped by driver:
Add SEL-3350 platform driver:
- Add SEL-3350 platform driver
Documentation/ABI:
- Add new attribute for mlxreg-io sysfs interfaces
MAINTAINERS:
- Add entries for Siemens IPC modules
Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
Merge remote-tracking branch 'pdx86/fixes' into pdx86/for-next:
- Merge remote-tracking branch 'pdx86/fixes' into pdx86/for-next
Merge remote-tracking branch 'pdx86/platform-drivers-x86-simatic-ipc' into review-hans:
- Merge remote-tracking branch 'pdx86/platform-drivers-x86-simatic-ipc' into review-hans
Merge tag 'ib-pdx86-simatic-v6.6' into review-hans:
- Merge tag 'ib-pdx86-simatic-v6.6' into review-hans
Merge tag 'ib-pdx86-simatic-v6.6-2' into review-hans:
- Merge tag 'ib-pdx86-simatic-v6.6-2' into review-hans
Move all simatic ipc drivers to the subdirectory siemens:
- Move all simatic ipc drivers to the subdirectory siemens
asus-wmi:
- corrections to egpu safety check
- Fix support for showing middle fan RPM
- expose dGPU and CPU tunables for ROG
- support setting mini-LED mode
- add safety checks to gpu switching
- don't allow eGPU switching if eGPU not connected
- add WMI method to show if egpu connected
- support middle fan custom curves
- add support for showing middle fan RPM
- add support for showing charger mode
dell-sysman:
- Fix reference leak
doc:
- TPMI: Add debugfs documentation
hp-bioscfg:
- Update steps order list elements are evaluated
- Use kmemdup() to replace kmalloc + memcpy
- Remove duplicate use of variable in inner loop
- Change how password encoding size is evaluated
- Change how enum possible values size is evaluated
- Change how order list size is evaluated
- Change how prerequisites size is evaluated
- Replace the word HACK from source code
- Fix uninitialized variable errors
- Fix memory leaks in attribute packages
- fix error reporting in hp_add_other_attributes()
- prevent a small buffer overflow
- fix a signedness bug in hp_wmi_perform_query()
- MAINTAINERS
- Makefile
- surestart-attributes
- string-attributes
- spmobj-attributes
- passwdobj-attributes
- order-list-attributes
- int-attributes
- enum-attributes
- biosattr-interface
- bioscfg
- bioscfg-h
- Documentation
ideapad-laptop:
- Add support for keyboard backlights using KBLC ACPI symbol
leds:
- simatic-ipc-leds: default config switch to platform switch
mlx-platform:
- Add dependency on PCI to Kconfig
mlxbf-bootctl:
- Support sysfs entries for MFG fields
- Support setting the ARM boot state to "OS up"
- Support the large icmc write/read
p2sb:
- Make the Kconfig symbol hidden
platform:
- mellanox: nvsw-sn2201: change fans i2c busses.
- mellanox: mlxreg-hotplug: Extend condition for notification callback processing
- mellanox: Add initial support for PCIe based programming logic device
- mellanox: mlx-platform: Get interrupt line through ACPI
- mellanox: mlx-platform: Introduce ACPI init flow
- mellanox: mlx-platform: Prepare driver to allow probing through ACPI infrastructure
- mellanox: mlx-platform: Add reset callback
- mellanox: Cosmetic changes
- mellanox: mlx-platform: Modify power off callback
- mellanox: mlx-platform: add support for additional CPLD
- mellanox: mlx-platform: Add reset cause attribute
- mellanox: mlx-platform: Modify health and power hotplug action
- mellanox: Modify reset causes description
- mellanox: Add field upgrade capability register
- mellanox: Add new attributes
- Explicitly include correct DT includes
platform/x86/amd/pmc:
- Fix build error with randconfig
- Move PMC driver to separate directory
platform/x86/amd/pmf:
- Fix a missing cleanup path
- Use str_on_off() helper
platform/x86/intel/tpmi:
- Add debugfs interface
- Read feature control status
platform/x86/siemens:
- simatic-ipc-batt: fix logical error for BX-59A
- simatic-ipc: fix logical error for BX-59A
- simatic-ipc-batt: fix wrong pointer pass to PTR_ERR()
- simatic-ipc-batt: add support for module BX-59A
- simatic-ipc: add new models BX-56A/BX-59A
- Kconfig: adjust help text
- simatic-ipc-batt: fix bat reading in BX_21A
simatic-ipc:
- use extra module loading for watchdog
- add auto-loading of hwmon modules
- add another model
- drop PCI runtime depends and header
- add CMOS battery monitoring
- add another model BX-21A
system76:
- Handle new KBLED ACPI methods
thinkpad_acpi:
- Switch to memdup_user_nul() helper
- use lockdep annotations
- take mutex for hotkey_mask_{set,get}
tools/power/x86/intel-speed-select:
- v1.17 release
- Change mem-frequency display name
- Prevent CPU 0 offline
- Error on CPU count exceed in request
- Support more than 8 sockets.
- Fix CPU count display
watchdog:
- simatic: Use idiomatic selection of P2SB
- simatic: add PCI dependency
- make Siemens Simatic watchdog driver default on platform
- simatic-ipc-wdt: make IO region access of one model muxed
wmi-bmof:
- Update MAINTAINERS entry
- Simplify read_bmof()
- Use device_create_bin_file()
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmTx720UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wHYggAgPpl4tcbqUK7S/fwVP2SzBKI+eF3
5PjO7PlMEVzyKyjHdkqoV8miMffWAGVPE+LV33Uifs5WTFjHRq2fq/Esvj9mAstG
1fCoHJ442xYkwNCUT1CCP7VsmcvV5eFXBjBantvwmIs8TyknGHwtq1h+d95evp4n
2uyQlRMmrWh/+8fjD8x5V35T0tky+4a4EX2WNLul13LlHCybGT/F2Kq456WdthjJ
zTQSL+qAMWmAiQKSEmhI3bRnFYPdpTetjiNSTlQczch8Y4qV3mJQlnkyDPX7SM9w
M2uZ4W39Ptxihx0ks/MIcuA4yrTfUX8BnhMTD29ZYCKHS7xBqW8YC5HQug==
=GaQL
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- hp-bioscfg: New firmware-attributes driver for changing BIOS settings
from within Linux
- asus-wmi: Add charger mode, middle fan and eGPU settings support
- ideapad: Support keyboard backlight control on more models
- mellanox: Support for new models
- sel-3350: New LED and power-supply driver for this industrial
mainboard
- simatic-ipc: Add RTC battery monitor and various new models support
- miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (101 commits)
platform/x86: asus-wmi: corrections to egpu safety check
platform/x86: mlx-platform: Add dependency on PCI to Kconfig
platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol
platform/x86/amd/pmc: Fix build error with randconfig
platform/x86/amd/pmf: Fix a missing cleanup path
watchdog: simatic: Use idiomatic selection of P2SB
platform/x86: p2sb: Make the Kconfig symbol hidden
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform: mellanox: nvsw-sn2201: change fans i2c busses.
platform: mellanox: mlxreg-hotplug: Extend condition for notification callback processing
platform: mellanox: Add initial support for PCIe based programming logic device
platform: mellanox: mlx-platform: Get interrupt line through ACPI
platform: mellanox: mlx-platform: Introduce ACPI init flow
platform: mellanox: mlx-platform: Prepare driver to allow probing through ACPI infrastructure
platform: mellanox: mlx-platform: Add reset callback
platform: mellanox: Cosmetic changes
platform: mellanox: mlx-platform: Modify power off callback
platform: mellanox: mlx-platform: add support for additional CPLD
platform: mellanox: mlx-platform: Add reset cause attribute
platform: mellanox: mlx-platform: Modify health and power hotplug action
...
I/O Coherence Port (IOCP) provides an AXI interface for connecting
external non-caching masters, such as DMA controllers. The accesses
from IOCP are coherent with D-Caches and L2 Cache.
IOCP is a specification option and is disabled on the Renesas RZ/Five
SoC due to this reason IP blocks using DMA will fail.
The Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
Below are the memory attributes supported:
* Device, Non-bufferable
* Device, bufferable
* Memory, Non-cacheable, Non-bufferable
* Memory, Non-cacheable, Bufferable
* Memory, Write-back, No-allocate
* Memory, Write-back, Read-allocate
* Memory, Write-back, Write-allocate
* Memory, Write-back, Read and Write-allocate
More info about PMA (section 10.3):
Link: http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
As a workaround for SoCs with IOCP disabled CMO needs to be handled by
software. Firstly OpenSBI configures the memory region as
"Memory, Non-cacheable, Bufferable" and passes this region as a global
shared dma pool as a DT node. With DMA_GLOBAL_POOL enabled all DMA
allocations happen from this region and synchronization callbacks are
implemented to synchronize when doing DMA transactions.
Example PMA region passes as a DT node from OpenSBI:
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
pma_resv0@58000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x58000000 0x0 0x08000000>;
no-map;
linux,dma-default;
};
};
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1
Link: https://lore.kernel.org/r/20230818135723.80612-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry
-----BEGIN PGP SIGNATURE-----
iQJGBAABCgAwFiEEMHr+pfEFOIzK+KY1YJEiAU0MEvkFAmTueu4SHHNlYW5qY0Bn
b29nbGUuY29tAAoJEGCRIgFNDBL5wvIQAK8jWhb1Y4CzrJmcZyYYIR6apgtXl4vB
KbhFIFHi5ZeZXlpXA2o/FW8Q9LNmcRLtxoapb09t/eyb0+ODllDPt/aSG7p6Y4p9
rNb1g6Hj77LTaG5gMy7/lbk9ERzf61+MKUuucU7WzjlY8oyd+lm+y2cx2O3+S/89
C5cp2CGnqK2NMbUnzYN8izMrdvtwDvgQvm3H7Ah8yrGXJkcemVggXibuh+2coTfo
p2RKrY+A4Syw/edNe0GVZYoSVJdwPEif8o0gAz5PwC2LTjpf9Iobt89KEx08BkVw
ms0MFbwLS66MoSYIVoZkBdy/Tri5aCKxHGqu7taEWhogjbzrPvktA6PNYihO4zGa
OSjA/oyAPvFJ4cLuBlrVh/xPWVoGX/6Sx3dBP5TI3zyR0FAqZkoAPDivWhflOpTt
q3aoHr6THGRzqHOCYuX7nwzhqBFSSHUF1zy/P7rThSzieSzUiJiANUwBjTeB9Wsr
5Cn+KQ8XOZw1LVcoeI9y97xcHh9HeP3seO+MFie8OH9QK4nUqgqEbF8sp7WF0rB6
6rZ1lht9a2Qx4xdtqSMBkQdgnnaiCZ7jBtEFMK6kSQ67zvorlCwkOue3TrtorJ4H
1XI/DGAzltEfCLMAq+4FkHkkEr84S3gRjaLlI9aHWlVrSk1wxM87R16jgVfJp74R
gTNAzCys2KwM
=dHTQ
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.6' of https://github.com/kvm-x86/linux into HEAD
KVM: x86: Selftests changes for 6.6:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is intended
to be the native uAPI for use with IOMMUFD. (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage.
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires. (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed Services
Card (PDS) Ethernet device, supporting live migration. (Brett Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code. (Li Zetao)
- Fix uninitialized hole in data structure and pad capability structures
for alignment. (Stefan Hajnoczi)
-----BEGIN PGP SIGNATURE-----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=eKSR
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is
intended to be the native uAPI for use with IOMMUFD (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed
Services Card (PDS) Ethernet device, supporting live migration (Brett
Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code (Li Zetao)
- Fix uninitialized hole in data structure and pad capability
structures for alignment (Stefan Hajnoczi)
* tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits)
vfio/pds: Send type for SUSPEND_STATUS command
vfio/pds: fix return value in pds_vfio_get_lm_file()
pds_core: Fix function header descriptions
vfio: align capability structures
vfio/type1: fix cap_migration information leak
vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code
vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver
vfio/pds: Add Kconfig and documentation
vfio/pds: Add support for firmware recovery
vfio/pds: Add support for dirty page tracking
vfio/pds: Add VFIO live migration support
vfio/pds: register with the pds_core PF
pds_core: Require callers of register/unregister to pass PF drvdata
vfio/pds: Initial support for pds VFIO driver
vfio: Commonize combine_ranges for use in other VFIO drivers
kvm/vfio: avoid bouncing the mutex when adding and deleting groups
kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()
docs: vfio: Add vfio device cdev description
vfio: Compile vfio_group infrastructure optionally
vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev()
...
- Work from Carlos Bilbao to integrate rustdoc output into the generated
HTML documentation. This took some work to figure out how to do it
without slowing the docs build and without creating people who don't have
Rust installed, but Carlos got there.
- Move the loongarch and mips architecture documentation under
Documentation/arch/.
- Some more maintainer documentation from Jakub
...plus the usual assortment of updates, translations, and fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmTvqNkPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YgIgH/3drfLtlFtzLqDOzrzDXS8yGnE3pPdxw796b
/ZFzAK16wYKaKevYoIz8bVGGKaE1sEUW0mhlq4KGdfZuxLG8YnWS8URyCW4FDU2E
6qNL+8oJ8LZfID46f9Q8ZgfEz7yF/mhCqPk7MEswYtwbscs2ZTGCTGYB/5BHlBuT
LR+M89uLmHgr8S1o24v30OgiX+VvQFyu0xoxIhbiqUZvBd/XdfX2pgYd9BGzMj5q
C2ZP+V14g36c5pV0EO9TwhCXOF/WVrp7DbjbfWAsqBSLxvpXPydH2q1DUzGeQtP1
exujrBD1O8q3pPdaNA5R+h6cWlHmUZug9mE4BRLp9ErGrozwJsQ=
=C3Uv
-----END PGP SIGNATURE-----
Merge tag 'docs-6.6' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Documentation work keeps chugging along; this includes:
- Work from Carlos Bilbao to integrate rustdoc output into the
generated HTML documentation. This took some work to figure out how
to do it without slowing the docs build and without creating people
who don't have Rust installed, but Carlos got there
- Move the loongarch and mips architecture documentation under
Documentation/arch/
- Some more maintainer documentation from Jakub
... plus the usual assortment of updates, translations, and fixes"
* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
Docu: genericirq.rst: fix irq-example
input: docs: pxrc: remove reference to phoenix-sim
Documentation: serial-console: Fix literal block marker
docs/mm: remove references to hmm_mirror ops and clean typos
docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
Documentation: Fix typos
Documentation/ABI: Fix typos
scripts: kernel-doc: fix macro handling in enums
scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
Documentation: riscv: Update boot image header since EFI stub is supported
Documentation: riscv: Add early boot document
Documentation: arm: Add bootargs to the table of added DT parameters
docs: kernel-parameters: Refer to the correct bitmap function
doc: update params of memhp_default_state=
docs: Add book to process/kernel-docs.rst
docs: sparse: fix invalid link addresses
docs: vfs: clean up after the iterate() removal
docs: Add a section on surveys to the researcher guidelines
docs: move mips under arch
docs: move loongarch under arch
...
changes to the clk framework this time around. That's probably because everyone
was on vacation (yours truly included). We did lose a couple clk drivers this
time around because nobody was using those devices. That skews the diffstat a
bit, but either way, nothing looks out of the ordinary here. The usual suspects
are chugging along adding support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a handful of
patches that move the NR_CLKS define from the DT binding header to the driver.
There's even patches that migrate drivers to use clk_parent_data and clk_hw to
describe clk tree topology. It seems that the spring (summer?) cleaning bug got
some folks, or the semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio codec on
RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs
- Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative
parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher) clock rate
for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to
the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are
added, while PCIe pipe clock, SDCC rcg ops are corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver
- Support retention for the Qualcomm SC8280XP display clock controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix
issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250,
while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for correctness
- Extend the Qualcomm SM83550 Video clock controller to support SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3,
M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow
glitch free switching
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmTv2wkRHHNib3lkQGtl
cm5lbC5vcmcACgkQrQKIl8bklSW1LRAAuHR2HoyB4bRHmCa1bfOfYYDfSWsBWEav
tWIfBl86Nl/Je50Gk2NJ9vqU5OPqRZ57TIniijHHoX5n7/kYcr8KVmlomY07hUeg
CzWyothkxg4k7+rQwVAWvmlR2YAVwzHDKcwq7gkMZOnW/y26LXip99cjopu2CJLx
zVwTgvWollmd4KVlicnAlx4zUjgNkWR24iA4Lcf5ir+Dr6FYNjxLI+akBA8EPxxi
wLixZbScgBSgpGn6KVgoFhclCToPS0gt5m6HfQxJ/svOCU54l+jRKpzkNZGWvyu4
A8t3CRrwL2iS/mfCGk2yRlaKySoLLpjlpW1AI7fHTWbG2P6p8ZphtN7jOeeAEsbq
TNpzWEjtY6B/lfRzxxINXkrtLaqmlnFY/P5np5fDrf/61gRFxLFQemyRdY/xCSJf
Kwq8ja1mrSGWoDGG9XhDqTf9Yek9LRObNzlDrEmn/i/qLTcxhOIz58pzHg4iAlx5
9HDtnJ8hKg4uE1TtT12Bmasb1+WzG7GYYESNfKWZhCvbRqEUzcDOHk7xpwYa1ffx
yZIgMs7Sb/exNW8LMPYmgnyj/f9eo5IdjiQvune+Zy5NrdzfyN6Sf/LSibrqCF2z
X5aFHqQrR8+PifD+se+g5HPa0ezSmBIhXzYUTOC6f+nywlrJjhwDXPDYI6Lcd//p
r4mpOmJS+G4=
=h2Jz
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...
DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share code
with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check
for unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450 Inline
Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt controller,
Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations
-----BEGIN PGP SIGNATURE-----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=kl+z
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share
code with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check for
unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450
Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt
controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations"
* tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
dt-bindings: usb: Add V3s compatible string for OHCI
dt-bindings: usb: Add V3s compatible string for EHCI
dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B
dt-bindings: vendor-prefixes: document Saef Technology
dt-bindings: thermal: lmh: update maintainer address
of: unittest: Fix of_unittest_pci_node() kconfig dependencies
dt-bindings: crypto: ice: Document sm8450 inline crypto engine
dt-bindings: ufs: qcom: Add ICE to sm8450 example
dt-bindings: ufs: qcom: Add sm6115 binding
dt-bindings: ufs: qcom: Add reg-names property for ICE
dt-bindings: yamllint: Enable quoted string check
dt-bindings: Drop remaining unneeded quotes
of: unittest-data: Fix whitespace - angular brackets
of: unittest-data: Fix whitespace - indentation
of: unittest-data: Fix whitespace - blank lines
of: unittest-data: Convert remaining overlay DTS files to sugar syntax
of: overlay: unittest: Add test for unresolved symbol
of: unittest: Add separators to of_unittest_overlay_high_level()
of: unittest: Cleanup partially-applied overlays
of: unittest: Merge of_unittest_apply{,_revert}_overlay_check()
...
These are the devicetree updates for Arm and RISC-V based SoCs,
mainly from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips,
Samsung, ST and Starfive.
Only a few new SoC got added:
- TI AM62P5, a variant of the existing Sitara AM62x family
- Intel Agilex5, an FPGFA platform that includes an
Cortex-A76/A55 SoC.
- Qualcomm ipq5018 is used in wireless access points
- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile
phone platform.
In total, 29 machines get added, which is low because of the summer
break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
these are development and reference boards.
Despite not adding a lot of new machines, there are over 700 patches in
total, most of which are cleanups and minor fixes.
-----BEGIN PGP SIGNATURE-----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=bO3j
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"These are the devicetree updates for Arm and RISC-V based SoCs, mainly
from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and
Starfive.
Only a few new SoC got added:
- TI AM62P5, a variant of the existing Sitara AM62x family
- Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55
SoC.
- Qualcomm ipq5018 is used in wireless access points
- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone
platform.
In total, 29 machines get added, which is low because of the summer
break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
these are development and reference boards.
Despite not adding a lot of new machines, there are over 700 patches
in total, most of which are cleanups and minor fixes"
* tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits)
arm64: dts: use capital "OR" for multiple licenses in SPDX
ARM: dts: use capital "OR" for multiple licenses in SPDX
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
ARM: dts: qcom: apq8064: add support to gsbi4 uart
riscv: dts: change TH1520 files to dual license
riscv: dts: thead: add BeagleV Ahead board device tree
dt-bindings: riscv: Add BeagleV Ahead board compatibles
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
ARM: dts: stm32: support display on stm32f746-disco board
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: add ltdc support on stm32f746 MCU
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Add PDC
riscv: dts: starfive: fix jh7110 qspi sort order
...
These are all minor cleanups for platform specific code in arch/arm/
and some of the associated drivers. The majority of these are work
done by Rob Herring to improve the way devicetreee header files
are handled.
-----BEGIN PGP SIGNATURE-----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=c9NM
-----END PGP SIGNATURE-----
Merge tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC cleanups from Arnd Bergmann:
"These are all minor cleanups for platform specific code in arch/arm/
and some of the associated drivers. The majority of these are work
done by Rob Herring to improve the way devicetreee header files are
handled"
* tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits)
ARM: davinci: Drop unused includes
ARM: s5pv210: Explicitly include correct DT includes
ARM: dove: Drop unused includes
ARM: mvebu: Explicitly include correct DT includes
Documentation/process: maintainer-soc: document dtbs_check requirement for Samsung
MAINTAINER: samsung: document dtbs_check requirement for Samsung
Documentation/process: maintainer-soc: add clean platforms profile
MAINTAINERS: soc: reference maintainer profile
ARM: nspire: Remove unused header file mmio.h
ARM: nspire: Use syscon-reboot to handle restart
soc: fsl: Explicitly include correct DT includes
soc: xilinx: Explicitly include correct DT includes
soc: sunxi: Explicitly include correct DT includes
soc: rockchip: Explicitly include correct DT includes
soc: mediatek: Explicitly include correct DT includes
soc: aspeed: Explicitly include correct DT includes
firmware: Explicitly include correct DT includes
bus: Explicitly include correct DT includes
ARM: spear: Explicitly include correct DT includes
ARM: mvebu: Explicitly include correct DT includes
...
The main change this time is the introduction of the drivers/genpd
subsystem that gets split out from drivers/soc to keep common
functionality together. Ulf Hansson is taking over maintainership for
these and is sending a separate pull request with the same commits,
but they are in the soc drivers tree to avoid conflicts against other
soc driver patches.
The SCMI driver subsystem gets an update to version 3.2 of the
specification. There are also updates to memory, reset and other firmware
drivers.
On the soc driver side, the updates are mostly cleanups across a number
of Arm platforms. On driver for loongarch adds power management for DT
based systems, another driver is for HiSilicon's Arm server chips with
their HCCS system health interface.
The remaining updates for the most part add support for additional
hardware in existing drivers or contain minor cleanups. Most of these
are for the Qualcomm Snapdragon platform.
-----BEGIN PGP SIGNATURE-----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=xmHW
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The main change this time was the introduction of the drivers/genpd
subsystem that gets split out from drivers/soc to keep common
functionality together.
The SCMI driver subsystem gets an update to version 3.2 of the
specification. There are also updates to memory, reset and other
firmware drivers.
On the soc driver side, the updates are mostly cleanups across a
number of Arm platforms. On driver for loongarch adds power management
for DT based systems, another driver is for HiSilicon's Arm server
chips with their HCCS system health interface.
The remaining updates for the most part add support for additional
hardware in existing drivers or contain minor cleanups. Most of these
are for the Qualcomm Snapdragon platform"
* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
bus: fsl-mc: Use common ranges functions
soc: kunpeng_hccs: fix some sparse warnings about incorrect type
soc: loongson2_pm: add power management support
soc: dt-bindings: add loongson-2 pm
soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
genpd: rockchip: Add PD_VO entry for rv1126
bus: ti-sysc: Fix cast to enum warning
soc: kunpeng_hccs: add MAILBOX dependency
MAINTAINERS: remove OXNAS entry
dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
soc: kunpeng_hccs: fix size_t format string
soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
dt-bindings: firmware: qcom: scm: Updating VMID list
firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
firmware: imx: scu-irq: add imx_scu_irq_get_status
...
and starts moving some of the corresponding code in there.
We have currently ~60 users of the genpd provider interface, which are
sprinkled across various subsystems. To release some burden from the soc
maintainers (Arnd Bergmann, etc) in particular, but also to gain a better
overall view of what goes on in the area, I will help out with maintenance.
-----BEGIN PGP SIGNATURE-----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=Vp8b
-----END PGP SIGNATURE-----
Merge tag 'genpd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull ARM SoC generic power domain driver updates from Ulf Hansson:
"This adds a new subsystem for generic power domain providers in
drivers/genpd and starts moving some of the corresponding code in
there.
We have currently ~60 users of the genpd provider interface, which are
sprinkled across various subsystems. To release some burden from the
soc maintainers (Arnd Bergmann, etc) in particular, but also to gain a
better overall view of what goes on in the area, I will help out with
maintenance"
[ I find the "genpd" name singularly uninformative, so we'll probably
end up moving this driver subsystem somewhere else, but that's still
being discussed - Linus ]
* tag 'genpd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (30 commits)
genpd: ti: Use for_each_node_with_property() simplify code logic
genpd: Explicitly include correct DT includes
genpd: imx: scu-pd: initialize is_off according to HW state
genpd: imx: scu-pd: Suppress bind attrs
genpd: imx: scu-pd: do not power off console if no_console_suspend
genpd: imx: scu-pd: add more PDs
genpd: imx: scu-pd: enlarge PD range
genpd: imx: relocate scu-pd under genpd
MAINTAINERS: adjust file entry in STARFIVE JH71XX PMU CONTROLLER DRIVER
genpd: Makefile: build imx
genpd: move owl-sps-helper.c from drivers/soc
soc: starfive: remove stale Makefile entry
ARM: ux500: Move power-domain driver to the genpd dir
ARM: ux500: Convert power-domain code into a regular platform driver
soc: xilinx: Move power-domain driver to the genpd dir
soc: ti: Mover power-domain drivers to the genpd dir
soc: tegra: Move powergate-bpmp driver to the genpd dir
soc: sunxi: Move power-domain driver to the genpd dir
soc: starfive: Move the power-domain driver to the genpd dir
soc: samsung: Move power-domain driver to the genpd dir
...
core:
- fix gfp flags in drmm_kmalloc
gpuva:
- add new generic GPU VA manager (for nouveau initially)
syncobj:
- add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl
dma-buf:
- acquire resv lock for mmap() in exporters
- support dma-buf self import automatically
- docs fixes
backlight:
- fix fbdev interactions
atomic:
- improve logging
prime:
- remove struct gem_prim_mmap plus driver updates
gem:
- drm_exec: add locking over multiple GEM objects
- fix lockdep checking
fbdev:
- make fbdev userspace interfaces optional
- use linux device instead of fbdev device
- use deferred i/o helper macros in various drivers
- Make FB core selectable without drivers
- Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT
- Add helper macros and Kconfig tokens for DMA-allocated framebuffer
ttm:
- support init_on_free
- swapout fixes
panel:
- panel-edp: Support AUO B116XAB01.4
- Support Visionox R66451 plus DT bindings
- ld9040: Backlight support, magic improved,
Kconfig fix
- Convert to of_device_get_match_data()
- Fix Kconfig dependencies
- simple: Set bpc value to fix warning; Set connector type for AUO T215HVN01;
Support Innolux G156HCE-L01 plus DT bindings
- ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings
- startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings
- sitronix-st7789v: Support Inanbo T28CP45TN89 plus DT bindings;
Support EDT ET028013DMA plus DT bindings; Various cleanups
- edp: Add timings for N140HCA-EAC
- Allow panels and touchscreens to power sequence together
- Fix Innolux G156HCE-L01 LVDS clock
bridge:
- debugfs for chains support
- dw-hdmi: Improve support for YUV420 bus format
CEC suspend/resume, update EDID on HDMI detect
- dw-mipi-dsi: Fix enable/disable of DSI controller
- lt9611uxc: Use MODULE_FIRMWARE()
- ps8640: Remove broken EDID code
- samsung-dsim: Fix command transfer
- tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
- adv7511: Fix low refresh rate
- anx7625: Switch to macros instead of hardcoded values
locking fixes
- tc358767: fix hardware delays
- sitronix-st7789v: Support panel orientation; Support rotation
property; Add support for Jasonic
JT240MHQS-HWT-EK-E3 plus DT bindings
amdgpu:
- SDMA 6.1.0 support
- HDP 6.1 support
- SMUIO 14.0 support
- PSP 14.0 support
- IH 6.1 support
- Lots of checkpatch cleanups
- GFX 9.4.3 updates
- Add USB PD and IFWI flashing documentation
- GPUVM updates
- RAS fixes
- DRR fixes
- FAMS fixes
- Virtual display fixes
- Soft IH fixes
- SMU13 fixes
- Rework PSP firmware loading for other IPs
- Kernel doc fixes
- DCN 3.0.1 fixes
- LTTPR fixes
- DP MST fixes
- DCN 3.1.6 fixes
- SMU 13.x fixes
- PSP 13.x fixes
- SubVP fixes
- GC 9.4.3 fixes
- Display bandwidth calculation fixes
- VCN4 secure submission fixes
- Allow building DC on RISC-V
- Add visible FB info to bo_print_info
- HBR3 fixes
- GFX9 MCBP fix
- GMC10 vmhub index fix
- GMC11 vmhub index fix
- Create a new doorbell manager
- SR-IOV fixes
- initial freesync panel replay support
- revert zpos properly until igt regression is fixeed
- use TTM to manage doorbell BAR
- Expose both current and average power via hwmon if supported
amdkfd:
- Cleanup CRIU dma-buf handling
- Use KIQ to unmap HIQ
- GFX 9.4.3 debugger updates
- GFX 9.4.2 debugger fixes
- Enable cooperative groups fof gfx11
- SVM fixes
- Convert older APUs to use dGPU path like newer APUs
- Drop IOMMUv2 path as it is no longer used
- TBA fix for aldebaran
i915:
- ICL+ DSI modeset sequence
- HDCP improvements
- MTL display fixes and cleanups
- HSW/BDW PSR1 restored
- Init DDI ports in VBT order
- General display refactors
- Start using plane scale factor for relative data rate
- Use shmem for dpt objects
- Expose RPS thresholds in sysfs
- Apply GuC SLPC min frequency softlimit correctly
- Extend Wa_14015795083 to TGL, RKL, DG1 and ADL
- Fix a VMA UAF for multi-gt platform
- Do not use stolen on MTL due to HW bug
- Check HuC and GuC version compatibility on MTL
- avoid infinite GPU waits due to premature release
of request memory
- Fixes and updates for GSC memory allocation
- Display SDVO fixes
- Take stolen handling out of FBC code
- Make i915_coherent_map_type GT-centric
- Simplify shmem_create_from_object map_type
msm:
- SM6125 MDSS support
- DPU: SM6125 DPU support
- DSI: runtime PM support, burst mode support
- DSI PHY: SM6125 support in 14nm DSI PHY driver
- GPU: prepare for a7xx
- fix a690 firmware
- disable relocs on a6xx and newer
radeon:
- Lots of checkpatch cleanups
ast:
- improve device-model detection
- Represent BMV as virtual connector
- Report DP connection status
nouveau:
- add new exec/bind interface to support Vulkan
- document some getparam ioctls
- improve VRAM detection
- various fixes/cleanups
- workraound DPCD issues
ivpu:
- MMU updates
- debugfs support
- Support vpu4
virtio:
- add sync object support
atmel-hlcdc:
- Support inverted pixclock polarity
etnaviv:
- runtime PM cleanups
- hang handling fixes
exynos:
- use fbdev DMA helpers
- fix possible NULL ptr dereference
komeda:
- always attach encoder
omapdrm:
- use fbdev DMA helpers
ingenic:
- kconfig regmap fixes
loongson:
- support display controller
mediatek:
- Small mtk-dpi cleanups
- DisplayPort: support eDP and aux-bus
- Fix coverity issues
- Fix potential memory leak if vmap() fail
mgag200:
- minor fixes
mxsfb:
- support disabling overlay planes
panfrost:
- fix sync in IRQ handling
ssd130x:
- Support per-controller default resolution plus DT bindings
- Reduce memory-allocation overhead
- Improve intermediate buffer size computation
- Fix allocation of temporary buffers
- Fix pitch computation
- Fix shadow plane allocation
tegra:
- use fbdev DMA helpers
- Convert to devm_platform_ioremap_resource()
- support bridge/connector
- enable PM
tidss:
- Support TI AM625 plus DT bindings
- Implement new connector model plus driver updates
vkms:
- improve write back support
- docs fixes
- support gamma LUT
zynqmp-dpsub:
- misc fixes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmTukSYACgkQDHTzWXnE
hr6vnQ/+J7vBVkBr8JsaEV/twcZwzbNdpivsIagd8U83GQB50nDReVXbNx+Wo0/C
WiGlrC6Sw3NVOGbkigd5IQ7fb5C/7RnBmzMi/iS7Qnk2uEqLqgV00VxfGwdm6wgr
0gNB8zuu2xYphHz2K8LzwnmeQRdN+YUQpUa2wNzLO88IEkTvq5vx2rJEn5p9/3hp
OxbbPBzpDRRPlkNFfVQCN8todbKdsPc4am81Eqgv7BJf21RFgQodPGW5koCYuv0w
3m+PJh1KkfYAL974EsLr/pkY7yhhiZ6SlFLX8ssg4FyZl/Vthmc9bl14jRq/pqt4
GBp8yrPq1XjrwXR8wv3MiwNEdANQ+KD9IoGlzLxqVgmEFRE+g4VzZZXeC3AIrTVP
FPg4iLUrDrmj9RpJmbVqhq9X2jZs+EtRAFkJPrPbq2fItAD2a2dW4X3ISSnnTqDI
6O2dVwuLCU6OfWnvN4bPW9p8CqRgR8Itqv1SI8qXooDy307YZu1eTUf5JAVwG/SW
xbDEFVFlMPyFLm+KN5dv1csJKK21vWi9gLg8phK8mTWYWnqMEtJqbxbRzmdBEFmE
pXKVu01P6ZqgBbaETpCljlOaEDdJnvO4W+o70MgBtpR2IWFMbMNO+iS0EmLZ6Vgj
9zYZctpL+dMuHV0Of1GMkHFRHTMYEzW4tuctLIQfG13y4WzyczY=
=CwV9
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"The drm core grew a new generic gpu virtual address manager, and new
execution locking helpers. These are used by nouveau now to provide
uAPI support for the userspace Vulkan driver. AMD had a bunch of new
IP core support, loads of refactoring around fbdev, but mostly just
the usual amount of stuff across the board.
core:
- fix gfp flags in drmm_kmalloc
gpuva:
- add new generic GPU VA manager (for nouveau initially)
syncobj:
- add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl
dma-buf:
- acquire resv lock for mmap() in exporters
- support dma-buf self import automatically
- docs fixes
backlight:
- fix fbdev interactions
atomic:
- improve logging
prime:
- remove struct gem_prim_mmap plus driver updates
gem:
- drm_exec: add locking over multiple GEM objects
- fix lockdep checking
fbdev:
- make fbdev userspace interfaces optional
- use linux device instead of fbdev device
- use deferred i/o helper macros in various drivers
- Make FB core selectable without drivers
- Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT
- Add helper macros and Kconfig tokens for DMA-allocated framebuffer
ttm:
- support init_on_free
- swapout fixes
panel:
- panel-edp: Support AUO B116XAB01.4
- Support Visionox R66451 plus DT bindings
- ld9040:
- Backlight support
- magic improved
- Kconfig fix
- Convert to of_device_get_match_data()
- Fix Kconfig dependencies
- simple:
- Set bpc value to fix warning
- Set connector type for AUO T215HVN01
- Support Innolux G156HCE-L01 plus DT bindings
- ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings
- startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings
- sitronix-st7789v:
- Support Inanbo T28CP45TN89 plus DT bindings
- Support EDT ET028013DMA plus DT bindings
- Various cleanups
- edp: Add timings for N140HCA-EAC
- Allow panels and touchscreens to power sequence together
- Fix Innolux G156HCE-L01 LVDS clock
bridge:
- debugfs for chains support
- dw-hdmi:
- Improve support for YUV420 bus format
- CEC suspend/resume
- update EDID on HDMI detect
- dw-mipi-dsi: Fix enable/disable of DSI controller
- lt9611uxc: Use MODULE_FIRMWARE()
- ps8640: Remove broken EDID code
- samsung-dsim: Fix command transfer
- tc358764:
- Handle HS/VS polarity
- Use BIT() macro
- Various cleanups
- adv7511: Fix low refresh rate
- anx7625:
- Switch to macros instead of hardcoded values
- locking fixes
- tc358767: fix hardware delays
- sitronix-st7789v:
- Support panel orientation
- Support rotation property
- Add support for Jasonic JT240MHQS-HWT-EK-E3 plus DT bindings
amdgpu:
- SDMA 6.1.0 support
- HDP 6.1 support
- SMUIO 14.0 support
- PSP 14.0 support
- IH 6.1 support
- Lots of checkpatch cleanups
- GFX 9.4.3 updates
- Add USB PD and IFWI flashing documentation
- GPUVM updates
- RAS fixes
- DRR fixes
- FAMS fixes
- Virtual display fixes
- Soft IH fixes
- SMU13 fixes
- Rework PSP firmware loading for other IPs
- Kernel doc fixes
- DCN 3.0.1 fixes
- LTTPR fixes
- DP MST fixes
- DCN 3.1.6 fixes
- SMU 13.x fixes
- PSP 13.x fixes
- SubVP fixes
- GC 9.4.3 fixes
- Display bandwidth calculation fixes
- VCN4 secure submission fixes
- Allow building DC on RISC-V
- Add visible FB info to bo_print_info
- HBR3 fixes
- GFX9 MCBP fix
- GMC10 vmhub index fix
- GMC11 vmhub index fix
- Create a new doorbell manager
- SR-IOV fixes
- initial freesync panel replay support
- revert zpos properly until igt regression is fixeed
- use TTM to manage doorbell BAR
- Expose both current and average power via hwmon if supported
amdkfd:
- Cleanup CRIU dma-buf handling
- Use KIQ to unmap HIQ
- GFX 9.4.3 debugger updates
- GFX 9.4.2 debugger fixes
- Enable cooperative groups fof gfx11
- SVM fixes
- Convert older APUs to use dGPU path like newer APUs
- Drop IOMMUv2 path as it is no longer used
- TBA fix for aldebaran
i915:
- ICL+ DSI modeset sequence
- HDCP improvements
- MTL display fixes and cleanups
- HSW/BDW PSR1 restored
- Init DDI ports in VBT order
- General display refactors
- Start using plane scale factor for relative data rate
- Use shmem for dpt objects
- Expose RPS thresholds in sysfs
- Apply GuC SLPC min frequency softlimit correctly
- Extend Wa_14015795083 to TGL, RKL, DG1 and ADL
- Fix a VMA UAF for multi-gt platform
- Do not use stolen on MTL due to HW bug
- Check HuC and GuC version compatibility on MTL
- avoid infinite GPU waits due to premature release of request memory
- Fixes and updates for GSC memory allocation
- Display SDVO fixes
- Take stolen handling out of FBC code
- Make i915_coherent_map_type GT-centric
- Simplify shmem_create_from_object map_type
msm:
- SM6125 MDSS support
- DPU: SM6125 DPU support
- DSI: runtime PM support, burst mode support
- DSI PHY: SM6125 support in 14nm DSI PHY driver
- GPU: prepare for a7xx
- fix a690 firmware
- disable relocs on a6xx and newer
radeon:
- Lots of checkpatch cleanups
ast:
- improve device-model detection
- Represent BMV as virtual connector
- Report DP connection status
nouveau:
- add new exec/bind interface to support Vulkan
- document some getparam ioctls
- improve VRAM detection
- various fixes/cleanups
- workraound DPCD issues
ivpu:
- MMU updates
- debugfs support
- Support vpu4
virtio:
- add sync object support
atmel-hlcdc:
- Support inverted pixclock polarity
etnaviv:
- runtime PM cleanups
- hang handling fixes
exynos:
- use fbdev DMA helpers
- fix possible NULL ptr dereference
komeda:
- always attach encoder
omapdrm:
- use fbdev DMA helpers
ingenic:
- kconfig regmap fixes
loongson:
- support display controller
mediatek:
- Small mtk-dpi cleanups
- DisplayPort: support eDP and aux-bus
- Fix coverity issues
- Fix potential memory leak if vmap() fail
mgag200:
- minor fixes
mxsfb:
- support disabling overlay planes
panfrost:
- fix sync in IRQ handling
ssd130x:
- Support per-controller default resolution plus DT bindings
- Reduce memory-allocation overhead
- Improve intermediate buffer size computation
- Fix allocation of temporary buffers
- Fix pitch computation
- Fix shadow plane allocation
tegra:
- use fbdev DMA helpers
- Convert to devm_platform_ioremap_resource()
- support bridge/connector
- enable PM
tidss:
- Support TI AM625 plus DT bindings
- Implement new connector model plus driver updates
vkms:
- improve write back support
- docs fixes
- support gamma LUT
zynqmp-dpsub:
- misc fixes"
* tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm: (1327 commits)
drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map()
drm/tests/drm_kunit_helpers: Place correct function name in the comment header
drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly
drm/nouveau: uvmm: fix unset region pointer on remap
drm/nouveau: sched: avoid job races between entities
drm/i915: Fix HPD polling, reenabling the output poll work as needed
drm: Add an HPD poll helper to reschedule the poll work
drm/i915: Fix TLB-Invalidation seqno store
drm/ttm/tests: Fix type conversion in ttm_pool_test
drm/msm/a6xx: Bail out early if setting GPU OOB fails
drm/msm/a6xx: Move LLC accessors to the common header
drm/msm/a6xx: Introduce a6xx_llc_read
drm/ttm/tests: Require MMU when testing
drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clock
Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""
drm/amdgpu: Add memory vendor information
drm/amd: flush any delayed gfxoff on suspend entry
drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
drm/amdgpu: Remove gfxoff check in GFX v9.4.3
drm/amd/pm: Update pci link speed for smu v13.0.6
...
* Chandan Babu will be taking over as the XFS release manager. He has
reviewed all the patches that are in this branch, though I'm signing
the branch one last time since I'm still technically maintainer. :P
* Create a maintainer entry profile for XFS in which we lay out the
various roles that I have played for many years. Aside from release
manager, the remaining roles are as yet unfilled.
* Start merging online repair -- we now have in-memory pageable memory
for staging btrees, a bunch of pending fixes, and we've started the
process of refactoring the scrub support code to support more of
repair. In particular, reaping of old blocks from damaged structures.
* Scrub the realtime summary file.
* Fix a bug where scrub's quota iteration only ever returned the root
dquot. Oooops.
* Fix some typos.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZOQE2AAKCRBKO3ySh0YR
pvmZAQDe+KceaVx6Dv2f9ihckeS2dILSpDTo1bh9BeXnt005VwD/ceHTaJxEl8lp
u/dixFDkRgp9RYtoTAK2WNiUxYetsAc=
=oZN6
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.6-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Chandan Babu:
- Chandan Babu will be taking over as the XFS release manager. He has
reviewed all the patches that are in this branch, though I'm signing
the branch one last time since I'm still technically maintainer. :P
- Create a maintainer entry profile for XFS in which we lay out the
various roles that I have played for many years. Aside from release
manager, the remaining roles are as yet unfilled.
- Start merging online repair -- we now have in-memory pageable memory
for staging btrees, a bunch of pending fixes, and we've started the
process of refactoring the scrub support code to support more of
repair. In particular, reaping of old blocks from damaged structures.
- Scrub the realtime summary file.
- Fix a bug where scrub's quota iteration only ever returned the root
dquot. Oooops.
- Fix some typos.
[ Pull request from Chandan Babu, but signed tag and description from
Darrick Wong, thus the first person singular above is Darrick, not
Chandan ]
* tag 'xfs-6.6-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (37 commits)
fs/xfs: Fix typos in comments
xfs: fix dqiterate thinko
xfs: don't check reflink iflag state when checking cow fork
xfs: simplify returns in xchk_bmap
xfs: rewrite xchk_inode_is_allocated to work properly
xfs: hide xfs_inode_is_allocated in scrub common code
xfs: fix agf_fllast when repairing an empty AGFL
xfs: allow userspace to rebuild metadata structures
xfs: clear pagf_agflreset when repairing the AGFL
xfs: allow the user to cancel repairs before we start writing
xfs: don't complain about unfixed metadata when repairs were injected
xfs: implement online scrubbing of rtsummary info
xfs: always rescan allegedly healthy per-ag metadata after repair
xfs: move the realtime summary file scrubber to a separate source file
xfs: wrap ilock/iunlock operations on sc->ip
xfs: get our own reference to inodes that we want to scrub
xfs: track usage statistics of online fsck
xfs: improve xfarray quicksort pivot
xfs: create scaffolding for creating debugfs entries
xfs: cache pages used for xfarray quicksort convergence
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmTvFssACgkQnJ2qBz9k
QNl7HggAuY154urYJdh7M+mbKDSywhcK0YT5pNNkcXVpv/t2c073Ce57+ObDCBaS
xetyFgH2XlvuAJ4dWmRDwBEzJ0jquKzvYJEMiXAexgy47ctnNPx5kLPsXpt3g+2q
pro7sK1b5BmX/zrgOontbJ8/YAwX85XToD4Cv5XyNSx/ex6/zsd5FProfdiY/HAt
qAcv7NkNTBbJBEBHhBNQSL2wOj3LzQV1U8v0XEcsBvTUxlX2jH8J4CsuFIotXqCF
37SNvZPk2c04HbaLgyU4Ura69qD0fn4vTMocuCoaf0CN2PL5jblRAwsAO2bfSqJE
AxZFq3afI0YV3Y9OrVlzHtSALuiZMQ==
=QPEQ
-----END PGP SIGNATURE-----
Merge tag 'for_v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, quota, and udf updates from Jan Kara:
- fixes for possible use-after-free issues with quota when racing with
chown
- fixes for ext2 crashing when xattr allocation races with another
block allocation to the same file from page writeback code
- fix for block number overflow in ext2
- marking of reiserfs as obsolete in MAINTAINERS
- assorted minor cleanups
* tag 'for_v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: Fix kernel-doc warnings
ext2: improve consistency of ext2_fsblk_t datatype usage
ext2: dump current reservation window info
ext2: fix race between setxattr and write back
ext2: introduce new flags argument for ext2_new_blocks()
ext2: remove ext2_new_block()
ext2: fix datatype of block number in ext2_xattr_set2()
udf: Drop pointless aops assignment
quota: use lockdep_assert_held_write in dquot_load_quota_sb
MAINTAINERS: change reiserfs status to obsolete
udf: Fix -Wstringop-overflow warnings
quota: simplify drop_dquot_ref()
quota: fix dqput() to follow the guarantees dquot_srcu should provide
quota: add new helper dquot_active()
quota: rename dquot_active() to inode_quota_active()
quota: factor out dquot_write_dquot()
ext2: remove redundant assignment to variable desc and variable best_desc
-----BEGIN PGP SIGNATURE-----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=XS+G
-----END PGP SIGNATURE-----
Merge tag 'for-6.6/io_uring-2023-08-28' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"Fairly quiet round in terms of features, mostly just improvements all
over the map for existing code. In detail:
- Initial support for socket operations through io_uring. Latter half
of this will likely land with the 6.7 kernel, then allowing things
like get/setsockopt (Breno)
- Cleanup of the cancel code, and then adding support for canceling
requests with the opcode as the key (me)
- Improvements for the io-wq locking (me)
- Fix affinity setting for SQPOLL based io-wq (me)
- Remove the io_uring userspace code. These were added initially as
copies from liburing, but all of them have since bitrotted and are
way out of date at this point. Rather than attempt to keep them in
sync, just get rid of them. People will have liburing available
anyway for these examples. (Pavel)
- Series improving the CQ/SQ ring caching (Pavel)
- Misc fixes and cleanups (Pavel, Yue, me)"
* tag 'for-6.6/io_uring-2023-08-28' of git://git.kernel.dk/linux: (47 commits)
io_uring: move iopoll ctx fields around
io_uring: move multishot cqe cache in ctx
io_uring: separate task_work/waiting cache line
io_uring: banish non-hot data to end of io_ring_ctx
io_uring: move non aligned field to the end
io_uring: add option to remove SQ indirection
io_uring: compact SQ/CQ heads/tails
io_uring: force inline io_fill_cqe_req
io_uring: merge iopoll and normal completion paths
io_uring: reorder cqring_flush and wakeups
io_uring: optimise extra io_get_cqe null check
io_uring: refactor __io_get_cqe()
io_uring: simplify big_cqe handling
io_uring: cqe init hardening
io_uring: improve cqe !tracing hot path
io_uring/rsrc: Annotate struct io_mapped_ubuf with __counted_by
io_uring/sqpoll: fix io-wq affinity when IORING_SETUP_SQPOLL is used
io_uring: simplify io_run_task_work_sig return
io_uring/rsrc: keep one global dummy_ubuf
io_uring: never overflow io_aux_cqe
...
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support tracking
KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the GENERIC_IOREMAP
ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take
GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency improvements
("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation, from
Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code ("Two
minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most
file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap
on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table range
API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM subsystem
documentation ("Improve mm documentation").
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA
jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6
Nfio7afS1ncD+hPYT8947UnLxTgn+ww=
=Afws
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
Core
----
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with large
writes operations.
- Store netdevs in an xarray, to simplify iterating over netdevs.
- Refactor nexthop selection for multipath routes.
- Improve sched class lifetime handling.
- Add backup nexthop ID support for bridge.
- Implement drop reasons support in openvswitch.
- Several data races annotations and fixes.
- Constify the sk parameter of routing functions.
- Prepend kernel version to netconsole message.
Protocols
---------
- Implement support for TCP probing the peer being under memory
pressure.
- Remove hard coded limitation on IPv6 specific info placement
inside the socket struct.
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated
per socket scaling factor.
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes.
- In-kernel support for the TLS alert protocol.
- Better support for UDP reuseport with connected sockets.
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size.
- Get rid of additional ancillary per MPTCP connection struct socket.
- Implement support for BPF-based MPTCP packet schedulers.
- Format MPTCP subtests selftests results in TAP.
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation.
BPF
---
- Multi-buffer support in AF_XDP.
- Add multi uprobe BPF links for attaching multiple uprobes
and usdt probes, which is significantly faster and saves extra fds.
- Implement an fd-based tc BPF attach API (TCX) and BPF link support on
top of it.
- Add SO_REUSEPORT support for TC bpf_sk_assign.
- Support new instructions from cpu v4 to simplify the generated code and
feature completeness, for x86, arm64, riscv64.
- Support defragmenting IPv(4|6) packets in BPF.
- Teach verifier actual bounds of bpf_get_smp_processor_id()
and fix perf+libbpf issue related to custom section handling.
- Introduce bpf map element count and enable it for all program types.
- Add a BPF hook in sys_socket() to change the protocol ID
from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy.
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress.
- Add uprobe support for the bpf_get_func_ip helper.
- Check skb ownership against full socket.
- Support for up to 12 arguments in BPF trampoline.
- Extend link_info for kprobe_multi and perf_event links.
Netfilter
---------
- Speed-up process exit by aborting ruleset validation if a
fatal signal is pending.
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types.
Driver API
----------
- Page pool optimizations, to improve data locality and cache usage.
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the need
for raw ioctl() handling in drivers.
- Simplify genetlink dump operations (doit/dumpit) providing them
the common information already populated in struct genl_info.
- Extend and use the yaml devlink specs to [re]generate the split ops.
- Introduce devlink selective dumps, to allow SF filtering SF based on
handle and other attributes.
- Add yaml netlink spec for netlink-raw families, allow route, link and
address related queries via the ynl tool.
- Remove phylink legacy mode support.
- Support offload LED blinking to phy.
- Add devlink port function attributes for IPsec.
New hardware / drivers
----------------------
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers
-------
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=9CsR
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
API:
- Move crypto engine callback from tfm ctx into algorithm object.
- Fix atomic sleep bug in crypto_destroy_instance.
- Move lib/mpi into lib/crypto.
Algorithms:
- Add chacha20 and poly1305 implementation for powerpc p10.
Drivers:
- Add AES skcipher and aead support to starfive.
- Add Dynamic Boost Control support to ccp.
- Add support for STM32P13 platform to stm32.
-----BEGIN PGP SIGNATURE-----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=LbcA
-----END PGP SIGNATURE-----
Merge tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Move crypto engine callback from tfm ctx into algorithm object
- Fix atomic sleep bug in crypto_destroy_instance
- Move lib/mpi into lib/crypto
Algorithms:
- Add chacha20 and poly1305 implementation for powerpc p10
Drivers:
- Add AES skcipher and aead support to starfive
- Add Dynamic Boost Control support to ccp
- Add support for STM32P13 platform to stm32"
* tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits)
Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
crypto: chelsio - Remove unused declarations
X.509: if signature is unsupported skip validation
crypto: qat - fix crypto capability detection for 4xxx
crypto: drivers - Explicitly include correct DT includes
crypto: engine - Remove crypto_engine_ctx
crypto: zynqmp - Use new crypto_engine_op interface
crypto: virtio - Use new crypto_engine_op interface
crypto: stm32 - Use new crypto_engine_op interface
crypto: jh7110 - Use new crypto_engine_op interface
crypto: rk3288 - Use new crypto_engine_op interface
crypto: omap - Use new crypto_engine_op interface
crypto: keembay - Use new crypto_engine_op interface
crypto: sl3516 - Use new crypto_engine_op interface
crypto: caam - Use new crypto_engine_op interface
crypto: aspeed - Remove non-standard sha512 algorithms
crypto: aspeed - Use new crypto_engine_op interface
crypto: amlogic - Use new crypto_engine_op interface
crypto: sun8i-ss - Use new crypto_engine_op interface
crypto: sun8i-ce - Use new crypto_engine_op interface
...
Developers can easily execute several tests on different devices
by just pushing their branch to their fork in a repository hosted
on gitlab.freedesktop.org which has an infrastructure to run jobs
in several runners and farms with different devices.
There are also other automated tools that uprev dependencies,
monitor the infra, and so on that are already used by the Mesa
project, and we can reuse them too.
Also, store expectations about what the DRM drivers are supposed
to pass in the IGT test suite. By storing the test expectations
along with the code, we can make sure both stay in sync with each
other so we can know when a code change breaks those expectations.
Also, include a configuration file that points to the out-of-tree
CI scripts.
This will allow all contributors to drm to reuse the infrastructure
already in gitlab.freedesktop.org to test the driver on several
generations of the hardware.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
[sima: Remove top-level empty file test, spotted by sfr]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230811171953.176431-1-helen.koike@collabora.com
Core GPIOLIB updates:
- wake-up poll() in user-space on device unbind
- improve fwnode usage
- interrupt domain handling improvements
- correctly handle the ngpios property in gpio-mmio
Driver cleanups:
- remove unneeded calls to platform_set_drvdata() all around the place
- remove unneeded of_match_ptr() expansions whenever a driver depends on
CONFIG_OF
- remove redundant calls to dev_err_probe() from gpio-omap and gpio-davinci
Driver improvements:
- use autopointers and guards from cleanup.h in gpio-sim
- shrink code in gpio-sim using some common helpers
- convert the idio family of drivers to using gpio-regmap
- convert gpio-ws16c48 to using gpio-regmap
- use devres to simplify code in gpio-pisosr and gpio-mxc
- update gpio-sifive: support IRQ wake, improve interrupt handling, allow
building as module
- make gpio-ge and gpio-bcm-kona OF-independent (plus some minor tweaks)
- add support for new models in gpio-pca953x and gpio-ds4520
- add runtime PM support to gpio-mxc
- fix a build warning in gpio-mxs
- add support for adding pin ranges to gpio-mlxbf3
- add counter/timer support to gpio-104-dio-48e
- switch to dynamic GPIO base allocation in gpio-vf610
- minor oneliners here and there
Device-tree bindings updates:
- enable the gpio-line-names property in snps,dw-apb and STMPE GPIO
- document new models in fsl-imx-gpio, ds4520 and pca95xx
- convert the bindings for brcm,kona-gpio to YAML
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmTt18QACgkQEacuoBRx
13IkWw/7Bri9D6XJZSaqITu1tXf0mCRskEpQDjgvEW5MpGt8K5nHcg08h5e5KB3j
1ppsWUZfCCzWexPkQlIeaXDnxJNoz4qfmq5gjJI1IP5BDs/Cvr6IxGLTMptPwsT8
381TH8eFIky1L7Q37PXL4Mc4lFO6lI9ZuH0kAgn7NpDNVTYnfLj7BUlR8kMBYhqc
yzeDVrUqO7NtxxWHpSz511EihmF1vWQmtvk8YI1aglbFyVaWI0sZgMHHzyENArR+
EIzNd49GHFOZpLdmATRsN885Aa6nFSEKnRNP1gqcDt8VziTdujs/L93Rqh4h3oCt
VbUobg1Sb4qSlVX0YapNWX9FyTSXupgVMPyjRd52O+X01Yjau4I8YSOMNKQXqudl
Y2jN7MoEdPYtYj7JGiTM035VZ6rKxZkY5k4Dx4ZKqoBMT+QSCvqBbBapwamW5+8U
EBrnpiJfQmqltQP54sb7vIRQ0j925kR0HYruDhjgxMaow1m8KzUJ5dG1yVuT1NGr
8PnMn+QjxO6IB2BbZX0656lDq0QRE7qyrlmQQ+8vI7nHqs9nINP4HHpht8T+FsHC
sJ2HN6HnzJlFZVFw3Zu6pn4Fhdkto0tiYaWxtFg/1oi0G6tl1imLx08UIvS101Xg
QkjaQQ+kaBL4KnmXiysP9zT/mOPlZneeE8ephqsXVtQc7YP/+sk=
=t+zD
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have a lot of code refactoring using common helpers and ended up
removing more lines then we're adding this release cycle.
Nothing really stands out, just small updates all over the place.
Core GPIOLIB updates:
- wake-up poll() in user-space on device unbind
- improve fwnode usage
- interrupt domain handling improvements
- correctly handle the ngpios property in gpio-mmio
Driver cleanups:
- remove unneeded calls to platform_set_drvdata() all around the
place
- remove unneeded of_match_ptr() expansions whenever a driver depends
on CONFIG_OF
- remove redundant calls to dev_err_probe() from gpio-omap and
gpio-davinci
Driver improvements:
- use autopointers and guards from cleanup.h in gpio-sim
- shrink code in gpio-sim using some common helpers
- convert the idio family of drivers to using gpio-regmap
- convert gpio-ws16c48 to using gpio-regmap
- use devres to simplify code in gpio-pisosr and gpio-mxc
- update gpio-sifive: support IRQ wake, improve interrupt handling,
allow building as module
- make gpio-ge and gpio-bcm-kona OF-independent (plus some minor
tweaks)
- add support for new models in gpio-pca953x and gpio-ds4520
- add runtime PM support to gpio-mxc
- fix a build warning in gpio-mxs
- add support for adding pin ranges to gpio-mlxbf3
- add counter/timer support to gpio-104-dio-48e
- switch to dynamic GPIO base allocation in gpio-vf610
- minor oneliners here and there
Device-tree bindings updates:
- enable the gpio-line-names property in snps,dw-apb and STMPE GPIO
- document new models in fsl-imx-gpio, ds4520 and pca95xx
- convert the bindings for brcm,kona-gpio to YAML"
* tag 'gpio-updates-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (94 commits)
gpio: pca953x: add support for TCA9538
dt-bindings: gpio: pca95xx: document new tca9538 chip
gpio: pca953x: Use i2c_get_match_data()
gpio: mlxbf3: use capital "OR" for multiple licenses in SPDX
gpio: pcf857x: Extend match data support for OF tables
gpio: vf610: switch to dynamic allocat GPIO base
gpiolib: provide and use gpiod_line_state_notify()
gpio: cdev: wake up lineevent poll() on device unbind
gpio: cdev: wake up linereq poll() on device unbind
gpio: cdev: wake up chardev poll() on device unbind
gpiolib: add a second blocking notifier to struct gpio_device
gpio: cdev: open-code to_gpio_chardev_data()
gpiolib: rename the gpio_device notifier
gpio: mlxbf3: Support add_pin_ranges()
gpio: mxc: Use helper function devm_clk_get_optional_enabled()
gpio: pca9570: fix kerneldoc
gpio: sim: simplify code with cleanup helpers
gpio: sim: replace memmove() + strstrip() with skip_spaces() + strim()
gpio: sim: simplify gpio_sim_device_config_live_store()
gpio: mxc: release the parent IRQ in runtime suspend
...
- New drivers
* Driver for Renesas HS3001
- Chip support added to existing drivers
* pmbus/mp2975 driver now supports MP2971 and MP2973
- Functional improvements
* Additional voltage and temperature sensor support for
NCT6798/NCT6799 in nt6755 driver
* it87 driver now detects AMDTSI sensor type
* dimmtemp now supports more than 32 DIMMs
- Driver removals
* sm665 driver removed as unsupportable and long since obsolete
- Minor fixes, cleanups, and simplifications in several drivers
-----BEGIN PGP SIGNATURE-----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=dpys
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Renesas HS3001
Chip support added to existing drivers:
- pmbus/mp2975 driver now supports MP2971 and MP2973
Functional improvements:
- Additional voltage and temperature sensor support for
NCT6798/NCT6799 in nt6755 driver
- it87 driver now detects AMDTSI sensor type
- dimmtemp now supports more than 32 DIMMs
Driver removals:
- sm665 driver removed as unsupportable and long since obsolete
.. and minor fixes, cleanups, and simplifications in several drivers"
* tag 'hwmon-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (57 commits)
hwmon: (tmp513) Simplify probe()
hwmon: (tmp513) Fix the channel number in tmp51x_is_visible()
hwmon: (mlxreg-fan) Extend number of supported fans
hwmon: (sis5595) Do PCI error checks on own line
hwmon: (vt8231) Do PCI error checks on own line
hwmon: (via686a) Do PCI error checks on own line
hwmon: pmbus: Fix -EIO seen on pli1209
hwmon: pmbus: Drop unnecessary clear fault page
hwmon: pmbus: Reduce clear fault page invocations
hwmon: (nsa320-hwmon) Remove redundant of_match_ptr()
hwmon: (pmbus/ucd9200) fix Wvoid-pointer-to-enum-cast warning
hwmon: (pmbus/ucd9000) fix Wvoid-pointer-to-enum-cast warning
hwmon: (pmbus/tps53679) fix Wvoid-pointer-to-enum-cast warning
hwmon: (pmbus/ibm-cffps) fix Wvoid-pointer-to-enum-cast warning
hwmon: (tmp513) fix Wvoid-pointer-to-enum-cast warning
hwmon: (max6697) fix Wvoid-pointer-to-enum-cast warning
hwmon: (max20730) fix Wvoid-pointer-to-enum-cast warning
hwmon: (lm90) fix Wvoid-pointer-to-enum-cast warning
hwmon: (lm85) fix Wvoid-pointer-to-enum-cast warning
hwmon: (lm75) fix Wvoid-pointer-to-enum-cast warning
...
There's been quite a lot of generic activity here, but more
administrative than featuers. We also have a bunch of new drivers,
including one that's part of a MFD so we pulled in the core parts of
that:
- Lots of work from both Yang Yingliang and Andy Shevchenko on moving
to host/device/controller based terminology for devices.
- QuadSPI SPI support for Allwinner sun6i.
- New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI
QuPv3 and StarFive JH7110 QSPI.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTp6KQACgkQJNaLcl1U
h9BHMQf+Jtvdx8cIhzVyMRBUfmeEzpi5oGiurPiQVBM5RsO0APULbxdy1kBsQ4FO
5Omv7juG323XiZc1hrtBPNoZfnn83pjjMFZZZYse8Ntd6e5iesHzxRQJaml8NPBA
0ktJQiB6Eh9WTjYT6LgN8T5j4SLT5F2jiDinBPUj1vHGSy0YXGWpYFq9QIkXwMbE
8n0jyf5+Neccs4CIiPR3ap8NjIyPE/b761acRFkOmF+iiHWmnFrQYNS4CSxR2kOC
yL0SlzuoG2feYSfiHyCKIPC0MGT5/Vn1tzNqoEam6B6Ecql24W8BMdU0/No3yKPT
22LIfRWR9Wb5usFxjDxIs9YaWD4abA==
=oj/i
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"There's been quite a lot of generic activity here, but more
administrative than featuers. We also have a bunch of new drivers,
including one that's part of a MFD so we pulled in the core parts of
that:
- Lots of work from both Yang Yingliang and Andy Shevchenko on moving
to host/device/controller based terminology for devices.
- QuadSPI SPI support for Allwinner sun6i.
- New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI
QuPv3 and StarFive JH7110 QSPI"
* tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (151 commits)
spi: at91-usart: Use PTR_ERR_OR_ZERO() to simplify code
spi: spi-sn-f-ospi: switch to use modern name
spi: sifive: switch to use modern name
spi: sh: switch to use modern name
spi: sh-sci: switch to use modern name
spi: sh-msiof: switch to use modern name
spi: sh-hspi: switch to use modern name
spi: sc18is602: switch to use modern name
spi: s3c64xx: switch to use modern name
spi: rzv2m-csi: switch to use devm_spi_alloc_host()
spi: rspi: switch to use spi_alloc_host()
spi: rockchip: switch to use modern name
spi: rockchip-sfc: switch to use modern name
spi: realtek-rtl: switch to use devm_spi_alloc_host()
spi: rb4xx: switch to use modern name
spi: qup: switch to use modern name
spi: spi-qcom-qspi: switch to use modern name
spi: pxa2xx: switch to use modern name
spi: ppc4xx: switch to use modern name
spi: spl022: switch to use modern name
...
.set_trips callback (Mikko Perttunen)
- Add the new Loongson-2 thermal sensor along with the DT bindings
(Yinbo Zhu)
- Use IS_ERR_OR_NULL helper to replace a double test on the TI bandgap
sensor (Li Zetao)
- Remove the call to platform_set_drvdata() as there is no call to
platform_get_drvdata() in a bunch of drivers where that happens
(Andrei Coardos)
- Switch the Mediatek LVTS mode to filtered in order to enable the
interrupts (Nícolas F. R. A. Prado)
- Fix Wvoid-pointer-to-enum-cast warning on the Exynos TMU (Krzysztof
Kozlowski)
- Remove redundant usage of of_match_ptr() as the driver db8500
already depends on CONFIG_OF (Ruan Jinjie)
- Remove redundant dev_err_probe() because the underlying function
already called it in the Mediatek sensor (Chen Jiahao)
- Free calibration nvmem after reading it on sun8i (Mark Brown)
- Remove useless comment in the code on sun8i (Yangtao Li)
- Make tsens_xxxx_nvmem static to fix sparse warning on QCom tsens (Min-Hua Chen)
- Remove error message at probe deferral on imx8mm (Ahmad Fatoum)
- Fix parameter check in lvts_debugfs_init with IS_ERR on Mediatek
LVTS (Minjie Du)
- Fix the interrupt routine and configuratoin for the Mediatek LVTS
(Nícolas F. R. A. Prado)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmTtjxEACgkQqDIjiipP
6E+I6Qf6A8KAWre/B5L9F5PyhYomNsvNh9YPMZoyK6OARbJ8YORKbPTki2Fa8+8F
n757yahMw1yI36n/9euLpPdTXF1dW2rL44wrwGazWv/DJEM9OCQa9ExSY+GuI7OE
rN7asQmFF6Cjk7h4ha6wwsMO8jQ6htjcHEnLq/QA3x/RpVVb9JOJaSOXqlZUs7Q9
321DtHQ6WbIO/rPT4HoX+fRof+O2AWswvgudF1++p9GsxW+wn2eiJ+eD4hleuf9F
NteYqpHVXxo/XkMTDCZUMyY2dhS7LGjmRYXSYuTbpJnQU75VzNmGNG+8f1GqAZ3X
JoGPetiUkfqtAviB5eNTtE7JXz2lbw==
=sWIi
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.6-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge ARM and related thermal control updates for 6.6-rc1 from Daniel
Lezcano:
"- Check if the Tegra BPMP supports the trip points in order to set the
.set_trips callback (Mikko Perttunen)
- Add the new Loongson-2 thermal sensor along with the DT bindings
(Yinbo Zhu)
- Use IS_ERR_OR_NULL helper to replace a double test on the TI bandgap
sensor (Li Zetao)
- Remove the call to platform_set_drvdata() as there is no call to
platform_get_drvdata() in a bunch of drivers where that happens
(Andrei Coardos)
- Switch the Mediatek LVTS mode to filtered in order to enable the
interrupts (Nícolas F. R. A. Prado)
- Fix Wvoid-pointer-to-enum-cast warning on the Exynos TMU (Krzysztof
Kozlowski)
- Remove redundant usage of of_match_ptr() as the driver db8500
already depends on CONFIG_OF (Ruan Jinjie)
- Remove redundant dev_err_probe() because the underlying function
already called it in the Mediatek sensor (Chen Jiahao)
- Free calibration nvmem after reading it on sun8i (Mark Brown)
- Remove useless comment in the code on sun8i (Yangtao Li)
- Make tsens_xxxx_nvmem static to fix sparse warning on QCom tsens (Min-Hua Chen)
- Remove error message at probe deferral on imx8mm (Ahmad Fatoum)
- Fix parameter check in lvts_debugfs_init with IS_ERR on Mediatek
LVTS (Minjie Du)
- Fix the interrupt routine and configuratoin for the Mediatek LVTS
(Nícolas F. R. A. Prado)"
* tag 'thermal-v6.6-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (27 commits)
thermal/drivers/tegra-bpmp: Check if BPMP supports trip points
thermal: dt-bindings: add loongson-2 thermal
thermal/drivers/loongson-2: Add thermal management support
thermal/drivers/ti-soc-thermal: Use helper function IS_ERR_OR_NULL()
thermal/drivers/generic-adc: Removed unneeded call to platform_set_drvdata()
thermal/drivers/max77620_thermal: Removed unneeded call to platform_set_drvdata()
thermal/drivers/mediatek/auxadc_thermal: Removed call to platform_set_drvdata()
thermal/drivers/sun8i_thermal: Remove unneeded call to platform_set_drvdata()
thermal/drivers/broadcom/brcstb_thermal: Removed unneeded platform_set_drvdata()
thermal/drivers/mediatek/lvts_thermal: Make readings valid in filtered mode
thermal/drivers/k3_bandgap: Remove unneeded call to platform_set_drvdata()
thermal/drivers/k3_j72xx_bandgap: Removed unneeded call to platform_set_drvdata()
thermal/drivers/broadcom/sr-thermal: Removed call to platform_set_drvdata()
thermal/drivers/samsung: Fix Wvoid-pointer-to-enum-cast warning
thermal/drivers/db8500: Remove redundant of_match_ptr()
thermal/drivers/mediatek: Clean up redundant dev_err_probe()
thermal/drivers/sun8i: Free calibration nvmem after reading it
thermal/drivers/sun8i: Remove unneeded comments
thermal/drivers/tsens: Make tsens_xxxx_nvmem static
thermal/drivers/imx8mm: Suppress log message on probe deferral
...
Other tha new device support and some minor fixes this has been a really
quiet release, the only notable things are the new drivers. There's a
couple of MFDs among the new devices so the generic parts are pulled in:
- Support for Analog Devices MAX77831/57/59, Awinc AW37503, Qualcom
PMX75 and RFGEN, RealTek RT5733, RichTek RTQ2208 and Texas
Instruments TPS65086.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTp6U4ACgkQJNaLcl1U
h9Cu4gf/RZZirDVcISmKrIYn95Dc838pHFe3tIK9Ehbwms/pzBWBzT0Eiy36g4Vd
1pUB6YJKJZIKLOfFAjmudGtT9C3Yrui+3cR3dPtxN793ixfCkT2RVdeaNJDCJ6xo
cPpAekMroDpMSczDvsTaqJzCXb4y+rjsAQ201w+WhegkSLk/yMsW7Y+a6wpaMjwt
qGD/+EDk/54aogPhrGvKq7uLwCgDo2A6HrU2rIIMHYnZuPaSjsPGcd0fZahlP7Mk
1b6/SSJ+KvN0XSAgBz4yFixECb0OG9p5ukpV17hwDAPBbNqLRp+O/o3LFLq+nsoY
yG3RpJQM6r3Bw3KqdxWF/e5sUNkEsQ==
=ZB93
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Other than new device support and some minor fixes this has been a
really quiet release, the only notable things are the new drivers.
There's a couple of MFDs among the new devices so the generic parts
are pulled in:
- Support for Analog Devices MAX77831/57/59, Awinc AW37503, Qualcom
PMX75 and RFGEN, RealTek RT5733, RichTek RTQ2208 and Texas
Instruments TPS65086"
* tag 'regulator-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (68 commits)
regulator: userspace-consumer: Drop event support for this cycle
regulator: aw37503: Switch back to use struct i2c_driver's .probe()
dt-bindings: regulator: qcom,rpmh-regulator: allow i, j, l, m & n as RPMh resource name suffix
regulator: dt-bindings: Add Awinic AW37503
regulator: aw37503: add regulator driver for Awinic AW37503
regulator: tps65086: Select dedicated regulator config for chip variant
mfd: tps65086: Read DEVICE ID register 1 from device
regulator: raa215300: Update help description
regulator: raa215300: Add missing blank space
regulator: raa215300: Change rate from 32000->32768
regulator: db8500-prcmu: Remove unused declaration power_state_active_is_enabled()
regulator: raa215300: Add const definition
regulator: raa215300: Fix resource leak in case of error
regulator: rtq2208: Switch back to use struct i2c_driver's .probe()
regulator: lp872x: Fix Wvoid-pointer-to-enum-cast warning
regulator: max77857: Fix Wvoid-pointer-to-enum-cast warning
regulator: ltc3589: Fix Wvoid-pointer-to-enum-cast warning
regulator: qcom_rpm-regulator: Use devm_kmemdup to replace devm_kmalloc + memcpy
regulator: tps6286x-regulator: Remove redundant of_match_ptr() macros
regulator: pfuze100-regulator: Remove redundant of_match_ptr() macro
...
In terms of lines, most changes this time are on the pinned-init API
and infrastructure. While we have a Rust version upgrade, and thus a
bunch of changes from the vendored 'alloc' crate as usual, this time
those do not account for many lines.
Toolchain and infrastructure:
- Upgrade to Rust 1.71.1. This is the second such upgrade, which is a
smaller jump compared to the last time.
This version allows us to remove the '__rust_*' allocator functions
-- the compiler now generates them as expected, thus now our
'KernelAllocator' is used.
It also introduces the 'offset_of!' macro in the standard library
(as an unstable feature) which we will need soon. So far, we were
using a declarative macro as a prerequisite in some not-yet-landed
patch series, which did not support sub-fields (i.e. nested structs):
#[repr(C)]
struct S {
a: u16,
b: (u8, u8),
}
assert_eq!(offset_of!(S, b.1), 3);
- Upgrade to bindgen 0.65.1. This is the first time we upgrade its
version.
Given it is a fairly big jump, it comes with a fair number of
improvements/changes that affect us, such as a fix needed to support
LLVM 16 as well as proper support for '__noreturn' C functions, which
are now mapped to return the '!' type in Rust:
void __noreturn f(void); // C
pub fn f() -> !; // Rust
- 'scripts/rust_is_available.sh' improvements and fixes.
This series takes care of all the issues known so far and adds a few
new checks to cover for even more cases, plus adds some more help
texts. All this together will hopefully make problematic setups
easier to identify and to be solved by users building the kernel.
In addition, it adds a test suite which covers all branches of the
shell script, as well as tests for the issues found so far.
- Support rust-analyzer for out-of-tree modules too.
- Give 'cfg's to rust-analyzer for the 'core' and 'alloc' crates.
- Drop 'scripts/is_rust_module.sh' since it is not needed anymore.
Macros crate:
- New 'paste!' proc macro.
This macro is a more flexible version of 'concat_idents!': it allows
the resulting identifier to be used to declare new items and it
allows to transform the identifiers before concatenating them, e.g.
let x_1 = 42;
paste!(let [<x _2>] = [<x _1>];);
assert!(x_1 == x_2);
The macro is then used for several of the pinned-init API changes in
this pull.
Pinned-init API:
- Make '#[pin_data]' compatible with conditional compilation of fields,
allowing to write code like:
#[pin_data]
pub struct Foo {
#[cfg(CONFIG_BAR)]
a: Bar,
#[cfg(not(CONFIG_BAR))]
a: Baz,
}
- New '#[derive(Zeroable)]' proc macro for the 'Zeroable' trait, which
allows 'unsafe' implementations for structs where every field
implements the 'Zeroable' trait, e.g.:
#[derive(Zeroable)]
pub struct DriverData {
id: i64,
buf_ptr: *mut u8,
len: usize,
}
- Add '..Zeroable::zeroed()' syntax to the 'pin_init!' macro for
zeroing all other fields, e.g.:
pin_init!(Buf {
buf: [1; 64],
..Zeroable::zeroed()
});
- New '{,pin_}init_array_from_fn()' functions to create array
initializers given a generator function, e.g.:
let b: Box<[usize; 1_000]> = Box::init::<Error>(
init_array_from_fn(|i| i)
).unwrap();
assert_eq!(b.len(), 1_000);
assert_eq!(b[123], 123);
- New '{,pin_}chain' methods for '{,Pin}Init<T, E>' that allow to
execute a closure on the value directly after initialization, e.g.:
let foo = init!(Foo {
buf <- init::zeroed()
}).chain(|foo| {
foo.setup();
Ok(())
});
- Support arbitrary paths in init macros, instead of just identifiers
and generic types.
- Implement the 'Zeroable' trait for the 'UnsafeCell<T>' and
'Opaque<T>' types.
- Make initializer values inaccessible after initialization.
- Make guards in the init macros hygienic.
'allocator' module:
- Use 'krealloc_aligned()' in 'KernelAllocator::alloc' preventing
misaligned allocations when the Rust 1.71.1 upgrade is applied later
in this pull.
The equivalent fix for the previous compiler version (where
'KernelAllocator' is not yet used) was merged into 6.5 already,
which added the 'krealloc_aligned()' function used here.
- Implement 'KernelAllocator::{realloc, alloc_zeroed}' for performance,
using 'krealloc_aligned()' too, which forwards the call to the C API.
'types' module:
- Make 'Opaque' be '!Unpin', removing the need to add a 'PhantomPinned'
field to Rust structs that contain C structs which must not be moved.
- Make 'Opaque' use 'UnsafeCell' as the outer type, rather than inner.
Documentation:
- Suggest obtaining the source code of the Rust's 'core' library using
the tarball instead of the repository.
MAINTAINERS:
- Andreas and Alice, from Samsung and Google respectively, are joining
as reviewers of the "RUST" entry.
As well as a few other minor changes and cleanups.
-----BEGIN PGP SIGNATURE-----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=BAP+
-----END PGP SIGNATURE-----
Merge tag 'rust-6.6' of https://github.com/Rust-for-Linux/linux
Pull rust updates from Miguel Ojeda:
"In terms of lines, most changes this time are on the pinned-init API
and infrastructure. While we have a Rust version upgrade, and thus a
bunch of changes from the vendored 'alloc' crate as usual, this time
those do not account for many lines.
Toolchain and infrastructure:
- Upgrade to Rust 1.71.1. This is the second such upgrade, which is a
smaller jump compared to the last time.
This version allows us to remove the '__rust_*' allocator functions
-- the compiler now generates them as expected, thus now our
'KernelAllocator' is used.
It also introduces the 'offset_of!' macro in the standard library
(as an unstable feature) which we will need soon. So far, we were
using a declarative macro as a prerequisite in some not-yet-landed
patch series, which did not support sub-fields (i.e. nested
structs):
#[repr(C)]
struct S {
a: u16,
b: (u8, u8),
}
assert_eq!(offset_of!(S, b.1), 3);
- Upgrade to bindgen 0.65.1. This is the first time we upgrade its
version.
Given it is a fairly big jump, it comes with a fair number of
improvements/changes that affect us, such as a fix needed to
support LLVM 16 as well as proper support for '__noreturn' C
functions, which are now mapped to return the '!' type in Rust:
void __noreturn f(void); // C
pub fn f() -> !; // Rust
- 'scripts/rust_is_available.sh' improvements and fixes.
This series takes care of all the issues known so far and adds a
few new checks to cover for even more cases, plus adds some more
help texts. All this together will hopefully make problematic
setups easier to identify and to be solved by users building the
kernel.
In addition, it adds a test suite which covers all branches of the
shell script, as well as tests for the issues found so far.
- Support rust-analyzer for out-of-tree modules too.
- Give 'cfg's to rust-analyzer for the 'core' and 'alloc' crates.
- Drop 'scripts/is_rust_module.sh' since it is not needed anymore.
Macros crate:
- New 'paste!' proc macro.
This macro is a more flexible version of 'concat_idents!': it
allows the resulting identifier to be used to declare new items and
it allows to transform the identifiers before concatenating them,
e.g.
let x_1 = 42;
paste!(let [<x _2>] = [<x _1>];);
assert!(x_1 == x_2);
The macro is then used for several of the pinned-init API changes
in this pull.
Pinned-init API:
- Make '#[pin_data]' compatible with conditional compilation of
fields, allowing to write code like:
#[pin_data]
pub struct Foo {
#[cfg(CONFIG_BAR)]
a: Bar,
#[cfg(not(CONFIG_BAR))]
a: Baz,
}
- New '#[derive(Zeroable)]' proc macro for the 'Zeroable' trait,
which allows 'unsafe' implementations for structs where every field
implements the 'Zeroable' trait, e.g.:
#[derive(Zeroable)]
pub struct DriverData {
id: i64,
buf_ptr: *mut u8,
len: usize,
}
- Add '..Zeroable::zeroed()' syntax to the 'pin_init!' macro for
zeroing all other fields, e.g.:
pin_init!(Buf {
buf: [1; 64],
..Zeroable::zeroed()
});
- New '{,pin_}init_array_from_fn()' functions to create array
initializers given a generator function, e.g.:
let b: Box<[usize; 1_000]> = Box::init::<Error>(
init_array_from_fn(|i| i)
).unwrap();
assert_eq!(b.len(), 1_000);
assert_eq!(b[123], 123);
- New '{,pin_}chain' methods for '{,Pin}Init<T, E>' that allow to
execute a closure on the value directly after initialization, e.g.:
let foo = init!(Foo {
buf <- init::zeroed()
}).chain(|foo| {
foo.setup();
Ok(())
});
- Support arbitrary paths in init macros, instead of just identifiers
and generic types.
- Implement the 'Zeroable' trait for the 'UnsafeCell<T>' and
'Opaque<T>' types.
- Make initializer values inaccessible after initialization.
- Make guards in the init macros hygienic.
'allocator' module:
- Use 'krealloc_aligned()' in 'KernelAllocator::alloc' preventing
misaligned allocations when the Rust 1.71.1 upgrade is applied
later in this pull.
The equivalent fix for the previous compiler version (where
'KernelAllocator' is not yet used) was merged into 6.5 already,
which added the 'krealloc_aligned()' function used here.
- Implement 'KernelAllocator::{realloc, alloc_zeroed}' for
performance, using 'krealloc_aligned()' too, which forwards the
call to the C API.
'types' module:
- Make 'Opaque' be '!Unpin', removing the need to add a
'PhantomPinned' field to Rust structs that contain C structs which
must not be moved.
- Make 'Opaque' use 'UnsafeCell' as the outer type, rather than
inner.
Documentation:
- Suggest obtaining the source code of the Rust's 'core' library
using the tarball instead of the repository.
MAINTAINERS:
- Andreas and Alice, from Samsung and Google respectively, are
joining as reviewers of the "RUST" entry.
As well as a few other minor changes and cleanups"
* tag 'rust-6.6' of https://github.com/Rust-for-Linux/linux: (42 commits)
rust: init: update expanded macro explanation
rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>`
rust: init: make `PinInit<T, E>` a supertrait of `Init<T, E>`
rust: init: implement `Zeroable` for `UnsafeCell<T>` and `Opaque<T>`
rust: init: add support for arbitrary paths in init macros
rust: init: add functions to create array initializers
rust: init: add `..Zeroable::zeroed()` syntax for zeroing all missing fields
rust: init: make initializer values inaccessible after initializing
rust: init: wrap type checking struct initializers in a closure
rust: init: make guards in the init macros hygienic
rust: add derive macro for `Zeroable`
rust: init: make `#[pin_data]` compatible with conditional compilation of fields
rust: init: consolidate init macros
docs: rust: clarify what 'rustup override' does
docs: rust: update instructions for obtaining 'core' source
docs: rust: add command line to rust-analyzer section
scripts: generate_rust_analyzer: provide `cfg`s for `core` and `alloc`
rust: bindgen: upgrade to 0.65.1
rust: enable `no_mangle_with_rust_abi` Clippy lint
rust: upgrade to Rust 1.71.1
...
This nolibc update for Linux 6.6-rc1 consists of:
Nolibc:
- improved portability by removing build errors with -ENOSYS
- added syscall6() on MIPS to support pselect6() and mmap()
- added setvbuf(), rmdir(), pipe(), pipe2()
- add support for ppc/ppc64
- environ is no longer optional
- fixed frame pointer issues at -O0
- dropped sys_stat() in favor of sys_statx()
- centralized _start_c() to remove lots of asm code
- switched size_t to __SIZE_TYPE__
Selftests:
- improved status reporting (success/warning/failure counts,
path to log file)
- various code cleanups (indent, unused variables, ...)
- more consistent test numbering
- enabled compiler warnings
- dropped unreliable chmod_net test
- improved reliability (create /dev/zero & /tmp, rely less on /proc)
- new tests (brk/sbrk/mmap/munmap)
- improved compatibility with musl
- new run-nolibc-test target to build and run natively
- new run-libc-test target to build and run against native libc
- made the cmdline parser more reliable against boolean arguments
- dropped dependency on memfd for vfprintf() test
- nolibc-test is no longer stripped
- added support for extending ARCH via XARCH
Other:
- add Thomas as co-maintainer
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmTs4xUACgkQCwJExA0N
QxyVjg//XGpM5P8JXfn2lsLXa+vPOkIKCY26RRTLUb8TJygTLpQY/aOh98pKCGbr
naudKubMLlhYhS7HSJXvH6rNkidsU7YiW8RTbHICHsB1Lqbqic2C8y34EOBJpalN
mYfidcwVdmUeJLBEiL5W4T5ip2FIHy5lhN4NeN7x0bHBkcXvkzL8/7QngjPB7Nmy
ibyPmtv/1m83+jmAOzDgNHJPIc0utjGynkKWBAd7SWClCWvS+22V5YgqCHaXN+1R
5RMDlJ+AqknniEmUouF7qfsbAI02uhKy8Gpmju6ghLjqN/4V3NNSuftXXT+x1L+x
L277L5s/RNfaXgzaXoUfIdnFeHhDhL0dJxBek/5LZdCy4rQWbn3VN1VI1NtGDnM1
BTHdDNirqxkKsXleSi3zXQptxvGLeP/E0loNd74ZlmOqNhZdt3bQdv53evDBSjGa
UvCfGC3r+AyKsxzXUbz+fPuQ+9yw5g1VJBKMol7lbiBmmYb3y7nXj2nPTkRU84Ge
twRo2ctF62a2d9hw/U/D7hFGYnzOosl3NmbrzAKWAGqXQ5jpWPbfeU/7bjVeW7d1
cuTGJtPHSVtCTaMnktHT+F9+Uh9SOFtUj/WMESvu6Y7iQRERqoXcHJuBhrms6r7S
DGKxHuVwopcuGXdNoKI/nyT4lApee33S5WcKMV2t85eoXAfe4EY=
=OCH0
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull nolibc updates from Shuah Khan:
"Nolibc:
- improved portability by removing build errors with -ENOSYS
- added syscall6() on MIPS to support pselect6() and mmap()
- added setvbuf(), rmdir(), pipe(), pipe2()
- add support for ppc/ppc64
- environ is no longer optional
- fixed frame pointer issues at -O0
- dropped sys_stat() in favor of sys_statx()
- centralized _start_c() to remove lots of asm code
- switched size_t to __SIZE_TYPE__
Selftests:
- improved status reporting (success/warning/failure counts, path to
log file)
- various code cleanups (indent, unused variables, ...)
- more consistent test numbering
- enabled compiler warnings
- dropped unreliable chmod_net test
- improved reliability (create /dev/zero & /tmp, rely less on /proc)
- new tests (brk/sbrk/mmap/munmap)
- improved compatibility with musl
- new run-nolibc-test target to build and run natively
- new run-libc-test target to build and run against native libc
- made the cmdline parser more reliable against boolean arguments
- dropped dependency on memfd for vfprintf() test
- nolibc-test is no longer stripped
- added support for extending ARCH via XARCH
Other:
- add Thomas as co-maintainer"
* tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (103 commits)
tools/nolibc: avoid undesired casts in the __sysret() macro
tools/nolibc: keep brk(), sbrk(), mmap() away from __sysret()
tools/nolibc: silence ppc64 compile warnings
selftests/nolibc: libc-test: use HOSTCC instead of CC
tools/nolibc: stackprotector.h: make __stack_chk_init static
selftests/nolibc: allow report with existing test log
selftests/nolibc: add test support for ppc64
selftests/nolibc: add test support for ppc64le
selftests/nolibc: add test support for ppc
selftests/nolibc: add XARCH and ARCH mapping support
tools/nolibc: add support for powerpc64
tools/nolibc: add support for powerpc
MAINTAINERS: nolibc: add myself as co-maintainer
selftests/nolibc: enable compiler warnings
selftests/nolibc: don't strip nolibc-test
selftests/nolibc: prevent out of bounds access in expect_vfprintf
selftests/nolibc: use correct return type for read() and write()
selftests/nolibc: avoid sign-compare warnings
selftests/nolibc: avoid unused parameter warnings
selftests/nolibc: make functions static if possible
...
Ard Biesheuvel