Commit graph

1388 commits

Author SHA1 Message Date
Chen Yu
cb31ef485d init: fix regression by supporting devices with major:minor:offset format
Commit 283e7ad02 ("init: stricter checking of major:minor root=
values") was so strict that it exposed the fact that a previously
unknown device format was being used.

Distributions like Ubuntu uses klibc (rather than uswsusp) to resume
system from hibernation.  klibc expressed the swap partition/file in
the form of major:minor:offset.  For example, 8:3:0 represents a swap
partition in klibc, and klibc's resume process in initrd will finally
echo 8:3:0 to /sys/power/resume for manually resuming.  However, due
to commit 283e7ad02's stricter checking, 8:3:0 will be treated as an
invalid device format, and manual resuming from hibernation will fail.

Fix this by adding support for devices with major:minor:offset format
when resuming from hibernation.

Reported-by: Prigent, Christophe <christophe.prigent@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-05-05 12:31:37 -04:00
Linus Torvalds
d6a24d0640 The documentation tree update for 4.1. Numerous fixes, the overdue removal
of the i2o docs, some new Chinese translations, and, hopefully, the README
 fix that will end the flow of identical patches to that file.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVMOeZAAoJEI3ONVYwIuV6/1YQAJwcVvd3ow6cMKuf8eRKMgjd
 crJUdRF9FTwyY21SRHBaonyiKOthnVedOUYnFQ5Z7jbII0EohJ//72nW0pQrHoGi
 0avkbM+ZAZzXfd/paOiZ5HtYkc8Bdc70mPU1fzfexnPm/JACOGznxQsob05r6/sT
 W1GyJcrLlp4uPrba9rhAdGtaa+mEFrt4SVCI+odXOnxQ/KOZSIu1n1F3bSSvL9zV
 YMBgRrCso+Cdtuhe4N3O1jsVy/hyOnvtqcUgwlD4VzElsshKvxdxHn47yeeWK1qI
 zZfGTv+q5QI/eZgIhBIrBpdCafgLipAmNZhX+M76xeNydhfhp60VizRgKfb6JiW1
 M+nLSnv2vxh4wgkJs7yWgW+8TJ0eCF/w2P/mBi6hDXuIul9gwgmNk+EZ7LONSh+2
 l3PV/dyswNs04qbYgFt2rygsxcg79RRbD54zi+S/3NU38/gh7nlidASKmNu1boG/
 KdZx3F0rmX/xQu4aQ5nIQl2N7sVLkEec+oN+ukQGyBTLVHkfAK06Z4EWUeYmmBKh
 M6gqRY5XJMtCm8D5bons/yZmwmpdZFZMxFGJ4enUwrfsJ8FQ8qy/KmFqF8SojGWQ
 HYs4ZUptz6SYa7K0Txe/q0pkrW+doy7t/Bz+JBNNdG7eLeHIpKhSqSlLIdB7MRKw
 NFA8a4PdgdMpf+Zr4bRy
 =LDbk
 -----END PGP SIGNATURE-----

Merge tag 'docs-for-linus' of git://git.lwn.net/linux-2.6

Pull documentation updates from Jonathan Corbet:
 "Numerous fixes, the overdue removal of the i2o docs, some new Chinese
  translations, and, hopefully, the README fix that will end the flow of
  identical patches to that file"

* tag 'docs-for-linus' of git://git.lwn.net/linux-2.6: (34 commits)
  Documentation/memcg: update memcg/kmem status
  Documentation: blackfin: Makefile: Typo building issue
  Documentation/vm/pagemap.txt: correct location of page-types tool
  Documentation/memory-barriers.txt: typo fix
  doc: Add guest_nice column to example output of `cat /proc/stat'
  Documentation/kernel-parameters: Move "eagerfpu" to its right place
  Documentation: gpio: Update ACPI part of the document to mention _DSD
  docs/completion.txt: Various tweaks and corrections
  doc: completion: context, scope and language fixes
  Documentation:Update Documentation/zh_CN/arm64/memory.txt
  Documentation:Update Documentation/zh_CN/arm64/booting.txt
  Documentation: Chinese translation of arm64/legacy_instructions.txt
  DocBook media: fix broken EIA hyperlink
  Documentation: tweak the maintainers entry
  README: Change gzip/bzip2 to xz compression format
  README: Update version number reference
  doc:pci: Fix typo in Documentation/PCI
  Documentation: drm: Use '->' when describing access through pointers.
  Documentation: Remove mentioning of block barriers
  Documentation/email-clients.txt: Fix one grammar mistake, add extra info about TB
  ...
2015-04-18 11:10:49 -04:00
Linus Torvalds
afad97eee4 - Most extensive changes this cycle are the DM core improvements to add
full blk-mq support to request-based DM.
   - disabled by default but user can opt-in with CONFIG_DM_MQ_DEFAULT
   - depends on some blk-mq changes from Jens' for-4.1/core branch so
     that explains why this pull is built on linux-block.git
 
 - Update DM to use name_to_dev_t() rather than open-coding a less
   capable device parser.
   - includes a couple small improvements to name_to_dev_t() that offer
     stricter constraints that DM's code provided.
 
 - Improvements to the dm-cache "mq" cache replacement policy.
 
 - A DM crypt crypt_ctr() error path fix and an async crypto deadlock fix.
 
 - A small efficiency improvement for DM crypt decryption by leveraging
   immutable biovecs.
 
 - Add error handling modes for corrupted blocks to DM verity.
 
 - A new "log-writes" DM target from Josef Bacik that is meant for
   file system developers to test file system integrity at particular
   points in the life of a file system.
 
 - A few DM log userspace cleanups and fixes.
 
 - A few Documentation fixes (for thin, cache, crypt and switch).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVMGvhAAoJEMUj8QotnQNaOKgH/iuWyEZ+ndWbeEBZs9ZJPEgU
 sRiKjSaPujkdB+78o+2DfAYjwCchqH1Oy781PqG85asTENVkcjD7LBPaIom/A2ml
 Z9ZeCzAKbrtB3lZR8QAg4u7+90kkuZv1SeOPMWBZCEV4GYLEpV1J4/f+RgdEs1kT
 upQcH1fFoQdyHGikwAKXf85Gmi4OrjVb19yoxu2xZnfwT2sCPq0okU4yBxb1B9mL
 X/FcHUeLS9LJGewEqTD3AvWrk+J5pqj+1EeKY2kRxisp1065TaljYwetgR76Vnfb
 o0J5eovJVL3AKRTYxvr5JABWD09xq9nG1hVBiuQMN5VmmvxjDKdbBPaKI4dZTt0=
 =uVjp
 -----END PGP SIGNATURE-----

Merge tag 'dm-4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - the most extensive changes this cycle are the DM core improvements to
   add full blk-mq support to request-based DM.

    - disabled by default but user can opt-in with CONFIG_DM_MQ_DEFAULT
    - depends on some blk-mq changes from Jens' for-4.1/core branch so
      that explains why this pull is built on linux-block.git

 - update DM to use name_to_dev_t() rather than open-coding a less
   capable device parser.

    - includes a couple small improvements to name_to_dev_t() that offer
      stricter constraints that DM's code provided.

 - improvements to the dm-cache "mq" cache replacement policy.

 - a DM crypt crypt_ctr() error path fix and an async crypto deadlock
   fix

 - a small efficiency improvement for DM crypt decryption by leveraging
   immutable biovecs

 - add error handling modes for corrupted blocks to DM verity

 - a new "log-writes" DM target from Josef Bacik that is meant for file
   system developers to test file system integrity at particular points
   in the life of a file system

 - a few DM log userspace cleanups and fixes

 - a few Documentation fixes (for thin, cache, crypt and switch)

* tag 'dm-4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (34 commits)
  dm crypt: fix missing error code return from crypt_ctr error path
  dm crypt: fix deadlock when async crypto algorithm returns -EBUSY
  dm crypt: leverage immutable biovecs when decrypting on read
  dm crypt: update URLs to new cryptsetup project page
  dm: add log writes target
  dm table: use bool function return values of true/false not 1/0
  dm verity: add error handling modes for corrupted blocks
  dm thin: remove stale 'trim' message documentation
  dm delay: use msecs_to_jiffies for time conversion
  dm log userspace base: fix compile warning
  dm log userspace transfer: match wait_for_completion_timeout return type
  dm table: fall back to getting device using name_to_dev_t()
  init: stricter checking of major:minor root= values
  init: export name_to_dev_t and mark name argument as const
  dm: add 'use_blk_mq' module param and expose in per-device ro sysfs attr
  dm: optimize dm_mq_queue_rq to _not_ use kthread if using pure blk-mq
  dm: add full blk-mq support to request-based DM
  dm: impose configurable deadline for dm_request_fn's merge heuristic
  dm sysfs: introduce ability to add writable attributes
  dm: don't start current request if it would've merged with the previous
  ...
2015-04-18 08:14:18 -04:00
Heinrich Schuchardt
ff691f6e03 kernel/fork.c: new function for max_threads
PAGE_SIZE is not guaranteed to be equal to or less than 8 times the
THREAD_SIZE.

E.g.  architecture hexagon may have page size 1M and thread size 4096.
This would lead to a division by zero in the calculation of max_threads.

With this patch the buggy code is moved to a separate function
set_max_threads.  The error is not fixed.

After fixing the problem in a separate patch the new function can be
reused to adjust max_threads after adding or removing memory.

Argument mempages of function fork_init() is removed as totalram_pages is
an exported symbol.

The creation of separate patches for refactoring to a new function and for
fixing the logic was suggested by Ingo Molnar.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17 09:04:06 -04:00
Iulia Manda
2813893f8b kernel: conditionally support non-root users, groups and capabilities
There are a lot of embedded systems that run most or all of their
functionality in init, running as root:root.  For these systems,
supporting multiple users is not necessary.

This patch adds a new symbol, CONFIG_MULTIUSER, that makes support for
non-root users, non-root groups, and capabilities optional.  It is enabled
under CONFIG_EXPERT menu.

When this symbol is not defined, UID and GID are zero in any possible case
and processes always have all capabilities.

The following syscalls are compiled out: setuid, setregid, setgid,
setreuid, setresuid, getresuid, setresgid, getresgid, setgroups,
getgroups, setfsuid, setfsgid, capget, capset.

Also, groups.c is compiled out completely.

In kernel/capability.c, capable function was moved in order to avoid
adding two ifdef blocks.

This change saves about 25 KB on a defconfig build.  The most minimal
kernels have total text sizes in the high hundreds of kB rather than
low MB.  (The 25k goes down a bit with allnoconfig, but not that much.

The kernel was booted in Qemu.  All the common functionalities work.
Adding users/groups is not possible, failing with -ENOSYS.

Bloat-o-meter output:
add/remove: 7/87 grow/shrink: 19/397 up/down: 1675/-26325 (-24650)

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Iulia Manda <iulia.manda21@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:22 -07:00
Dan Ehrenberg
283e7ad024 init: stricter checking of major:minor root= values
In the kernel command-line, previously, root=1:2jakshflaksjdhfa would
be accepted and interpreted just like root=1:2. This patch adds
stricter checking so that additional characters after major:minor are
rejected by root=.

The goal of this change is to help in unifying DM's interpretation of
its block device argument by using existing kernel code (name_to_dev_t).
But DM rejects malformed major:minor pairs, it seems reasonable for
root= to reject them as well.

Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-04-15 12:10:19 -04:00
Dan Ehrenberg
e6e20a7a5f init: export name_to_dev_t and mark name argument as const
DM will switch its device lookup code to using name_to_dev_t() so it
must be exported.  Also, the @name argument should be marked const.

Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-04-15 12:10:18 -04:00
Linus Torvalds
1dcf58d6e6 Merge branch 'akpm' (patches from Andrew)
Merge first patchbomb from Andrew Morton:

 - arch/sh updates

 - ocfs2 updates

 - kernel/watchdog feature

 - about half of mm/

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (122 commits)
  Documentation: update arch list in the 'memtest' entry
  Kconfig: memtest: update number of test patterns up to 17
  arm: add support for memtest
  arm64: add support for memtest
  memtest: use phys_addr_t for physical addresses
  mm: move memtest under mm
  mm, hugetlb: abort __get_user_pages if current has been oom killed
  mm, mempool: do not allow atomic resizing
  memcg: print cgroup information when system panics due to panic_on_oom
  mm: numa: remove migrate_ratelimited
  mm: fold arch_randomize_brk into ARCH_HAS_ELF_RANDOMIZE
  mm: split ET_DYN ASLR from mmap ASLR
  s390: redefine randomize_et_dyn for ELF_ET_DYN_BASE
  mm: expose arch_mmap_rnd when available
  s390: standardize mmap_rnd() usage
  powerpc: standardize mmap_rnd() usage
  mips: extract logic for mmap_rnd()
  arm64: standardize mmap_rnd() usage
  x86: standardize mmap_rnd() usage
  arm: factor out mmap ASLR into mmap_rnd
  ...
2015-04-14 16:49:17 -07:00
Toshi Kani
0ddab1d2ed lib/ioremap.c: add huge I/O map capability interfaces
Add ioremap_pud_enabled() and ioremap_pmd_enabled(), which return 1 when
I/O mappings with pud/pmd are enabled on the kernel.

ioremap_huge_init() calls arch_ioremap_pud_supported() and
arch_ioremap_pmd_supported() to initialize the capabilities at boot-time.

A new kernel option "nohugeiomap" is also added, so that user can disable
the huge I/O map capabilities when necessary.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Robert Elliott <Elliott@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14 16:49:04 -07:00
Linus Torvalds
6c8a53c9e6 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf changes from Ingo Molnar:
 "Core kernel changes:

   - One of the more interesting features in this cycle is the ability
     to attach eBPF programs (user-defined, sandboxed bytecode executed
     by the kernel) to kprobes.

     This allows user-defined instrumentation on a live kernel image
     that can never crash, hang or interfere with the kernel negatively.
     (Right now it's limited to root-only, but in the future we might
     allow unprivileged use as well.)

     (Alexei Starovoitov)

   - Another non-trivial feature is per event clockid support: this
     allows, amongst other things, the selection of different clock
     sources for event timestamps traced via perf.

     This feature is sought by people who'd like to merge perf generated
     events with external events that were measured with different
     clocks:

       - cluster wide profiling

       - for system wide tracing with user-space events,

       - JIT profiling events

     etc.  Matching perf tooling support is added as well, available via
     the -k, --clockid <clockid> parameter to perf record et al.

     (Peter Zijlstra)

  Hardware enablement kernel changes:

   - x86 Intel Processor Trace (PT) support: which is a hardware tracer
     on steroids, available on Broadwell CPUs.

     The hardware trace stream is directly output into the user-space
     ring-buffer, using the 'AUX' data format extension that was added
     to the perf core to support hardware constraints such as the
     necessity to have the tracing buffer physically contiguous.

     This patch-set was developed for two years and this is the result.
     A simple way to make use of this is to use BTS tracing, the PT
     driver emulates BTS output - available via the 'intel_bts' PMU.
     More explicit PT specific tooling support is in the works as well -
     will probably be ready by 4.2.

     (Alexander Shishkin, Peter Zijlstra)

   - x86 Intel Cache QoS Monitoring (CQM) support: this is a hardware
     feature of Intel Xeon CPUs that allows the measurement and
     allocation/partitioning of caches to individual workloads.

     These kernel changes expose the measurement side as a new PMU
     driver, which exposes various QoS related PMU events.  (The
     partitioning change is work in progress and is planned to be merged
     as a cgroup extension.)

     (Matt Fleming, Peter Zijlstra; CPU feature detection by Peter P
     Waskiewicz Jr)

   - x86 Intel Haswell LBR call stack support: this is a new Haswell
     feature that allows the hardware recording of call chains, plus
     tooling support.  To activate this feature you have to enable it
     via the new 'lbr' call-graph recording option:

        perf record --call-graph lbr
        perf report

     or:

        perf top --call-graph lbr

     This hardware feature is a lot faster than stack walk or dwarf
     based unwinding, but has some limitations:

       - It reuses the current LBR facility, so LBR call stack and
         branch record can not be enabled at the same time.

       - It is only available for user-space callchains.

     (Yan, Zheng)

   - x86 Intel Broadwell CPU support and various event constraints and
     event table fixes for earlier models.

     (Andi Kleen)

   - x86 Intel HT CPUs event scheduling workarounds.  This is a complex
     CPU bug affecting the SNB,IVB,HSW families that results in counter
     value corruption.  The mitigation code is automatically enabled and
     is transparent.

     (Maria Dimakopoulou, Stephane Eranian)

  The perf tooling side had a ton of changes in this cycle as well, so
  I'm only able to list the user visible changes here, in addition to
  the tooling changes outlined above:

  User visible changes affecting all tools:

      - Improve support of compressed kernel modules (Jiri Olsa)
      - Save DSO loading errno to better report errors (Arnaldo Carvalho de Melo)
      - Bash completion for subcommands (Yunlong Song)
      - Add 'I' event modifier for perf_event_attr.exclude_idle bit (Jiri Olsa)
      - Support missing -f to override perf.data file ownership. (Yunlong Song)
      - Show the first event with an invalid filter (David Ahern, Arnaldo Carvalho de Melo)

  User visible changes in individual tools:

    'perf data':

        New tool for converting perf.data to other formats, initially
        for the CTF (Common Trace Format) from LTTng (Jiri Olsa,
        Sebastian Siewior)

    'perf diff':

        Add --kallsyms option (David Ahern)

    'perf list':

        Allow listing events with 'tracepoint' prefix (Yunlong Song)

        Sort the output of the command (Yunlong Song)

    'perf kmem':

        Respect -i option (Jiri Olsa)

        Print big numbers using thousands' group (Namhyung Kim)

        Allow -v option (Namhyung Kim)

        Fix alignment of slab result table (Namhyung Kim)

    'perf probe':

        Support multiple probes on different binaries on the same command line (Masami Hiramatsu)

        Support unnamed union/structure members data collection. (Masami Hiramatsu)

        Check kprobes blacklist when adding new events. (Masami Hiramatsu)

    'perf record':

        Teach 'perf record' about perf_event_attr.clockid (Peter Zijlstra)

        Support recording running/enabled time (Andi Kleen)

    'perf sched':

        Improve the performance of 'perf sched replay' on high CPU core count machines (Yunlong Song)

    'perf report' and 'perf top':

        Allow annotating entries in callchains in the hists browser (Arnaldo Carvalho de Melo)

        Indicate which callchain entries are annotated in the
        TUI hists browser (Arnaldo Carvalho de Melo)

        Add pid/tid filtering to 'report' and 'script' commands (David Ahern)

        Consider PERF_RECORD_ events with cpumode == 0 in 'perf top', removing one
        cause of long term memory usage buildup, i.e. not processing PERF_RECORD_EXIT
        events (Arnaldo Carvalho de Melo)

    'perf stat':

        Report unsupported events properly (Suzuki K. Poulose)

        Output running time and run/enabled ratio in CSV mode (Andi Kleen)

    'perf trace':

        Handle legacy syscalls tracepoints (David Ahern, Arnaldo Carvalho de Melo)

        Only insert blank duration bracket when tracing syscalls (Arnaldo Carvalho de Melo)

        Filter out the trace pid when no threads are specified (Arnaldo Carvalho de Melo)

        Dump stack on segfaults (Arnaldo Carvalho de Melo)

        No need to explicitely enable evsels for workload started from perf, let it
        be enabled via perf_event_attr.enable_on_exec, removing some events that take
        place in the 'perf trace' before a workload is really started by it.
        (Arnaldo Carvalho de Melo)

        Allow mixing with tracepoints and suppressing plain syscalls. (Arnaldo Carvalho de Melo)

  There's also been a ton of infrastructure work done, such as the
  split-out of perf's build system into tools/build/ and other changes -
  see the shortlog and changelog for details"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (358 commits)
  perf/x86/intel/pt: Clean up the control flow in pt_pmu_hw_init()
  perf evlist: Fix type for references to data_head/tail
  perf probe: Check the orphaned -x option
  perf probe: Support multiple probes on different binaries
  perf buildid-list: Fix segfault when show DSOs with hits
  perf tools: Fix cross-endian analysis
  perf tools: Fix error path to do closedir() when synthesizing threads
  perf tools: Fix synthesizing fork_event.ppid for non-main thread
  perf tools: Add 'I' event modifier for exclude_idle bit
  perf report: Don't call map__kmap if map is NULL.
  perf tests: Fix attr tests
  perf probe: Fix ARM 32 building error
  perf tools: Merge all perf_event_attr print functions
  perf record: Add clockid parameter
  perf sched replay: Use replay_repeat to calculate the runavg of cpu usage instead of the default value 10
  perf sched replay: Support using -f to override perf.data file ownership
  perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files
  perf sched replay: Handle the dead halt of sem_wait when create_tasks() fails for any task
  perf sched replay: Fix the segmentation fault problem caused by pr_err in threads
  perf sched replay: Realloc the memory of pid_to_task stepwise to adapt to the different pid_max configurations
  ...
2015-04-14 14:37:47 -07:00
Linus Torvalds
078838d565 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU changes from Ingo Molnar:
 "The main changes in this cycle were:

   - changes permitting use of call_rcu() and friends very early in
     boot, for example, before rcu_init() is invoked.

   - add in-kernel API to enable and disable expediting of normal RCU
     grace periods.

   - improve RCU's handling of (hotplug-) outgoing CPUs.

   - NO_HZ_FULL_SYSIDLE fixes.

   - tiny-RCU updates to make it more tiny.

   - documentation updates.

   - miscellaneous fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
  cpu: Provide smpboot_thread_init() on !CONFIG_SMP kernels as well
  cpu: Defer smpboot kthread unparking until CPU known to scheduler
  rcu: Associate quiescent-state reports with grace period
  rcu: Yet another fix for preemption and CPU hotplug
  rcu: Add diagnostics to grace-period cleanup
  rcutorture: Default to grace-period-initialization delays
  rcu: Handle outgoing CPUs on exit from idle loop
  cpu: Make CPU-offline idle-loop transition point more precise
  rcu: Eliminate ->onoff_mutex from rcu_node structure
  rcu: Process offlining and onlining only at grace-period start
  rcu: Move rcu_report_unblock_qs_rnp() to common code
  rcu: Rework preemptible expedited bitmask handling
  rcu: Remove event tracing from rcu_cpu_notify(), used by offline CPUs
  rcutorture: Enable slow grace-period initializations
  rcu: Provide diagnostic option to slow down grace-period initialization
  rcu: Detect stalls caused by failure to propagate up rcu_node tree
  rcu: Eliminate empty HOTPLUG_CPU ifdef
  rcu: Simplify sync_rcu_preempt_exp_init()
  rcu: Put all orphan-callback-related code under same comment
  rcu: Consolidate offline-CPU callback initialization
  ...
2015-04-14 13:36:04 -07:00
Linus Torvalds
d0bbe0dd35 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "Usual trivial tree updates.  Nothing outstanding -- mostly printk()
  and comment fixes and unused identifier removals"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  goldfish: goldfish_tty_probe() is not using 'i' any more
  powerpc: Fix comment in smu.h
  qla2xxx: Fix printks in ql_log message
  lib: correct link to the original source for div64_u64
  si2168, tda10071, m88ds3103: Fix firmware wording
  usb: storage: Fix printk in isd200_log_config()
  qla2xxx: Fix printk in qla25xx_setup_mode
  init/main: fix reset_device comment
  ipwireless: missing assignment
  goldfish: remove unreachable line of code
  coredump: Fix do_coredump() comment
  stacktrace.h: remove duplicate declaration task_struct
  smpboot.h: Remove unused function prototype
  treewide: Fix typo in printk messages
  treewide: Fix typo in printk messages
  mod_devicetable: fix comment for match_flags
2015-04-14 09:50:27 -07:00
Paul E. McKenney
00df35f991 cpu: Defer smpboot kthread unparking until CPU known to scheduler
Currently, smpboot_unpark_threads() is invoked before the incoming CPU
has been added to the scheduler's runqueue structures.  This might
potentially cause the unparked kthread to run on the wrong CPU, since the
correct CPU isn't fully set up yet.

That causes a sporadic, hard to debug boot crash triggering on some
systems, reported by Borislav Petkov, and bisected down to:

  2a442c9c64 ("x86: Use common outgoing-CPU-notification code")

This patch places smpboot_unpark_threads() in a CPU hotplug
notifier with priority set so that these kthreads are unparked just after
the CPU has been added to the runqueues.

Reported-and-tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-13 08:25:16 +02:00
Vladimir Davydov
197175427a Documentation/memcg: update memcg/kmem status
Memcg/kmem reclaim support has been finally merged. Reflect this in the
documentation.

Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-04-11 15:23:31 +02:00
Ingo Molnar
e1abf2cc8d bpf: Fix the build on BPF_SYSCALL=y && !CONFIG_TRACING kernels, make it more configurable
So bpf_tracing.o depends on CONFIG_BPF_SYSCALL - but that's not its only
dependency, it also depends on the tracing infrastructure and on kprobes,
without which it will fail to build with:

  In file included from kernel/trace/bpf_trace.c:14:0:
  kernel/trace/trace.h: In function ‘trace_test_and_set_recursion’:
  kernel/trace/trace.h:491:28: error: ‘struct task_struct’ has no member named ‘trace_recursion’
    unsigned int val = current->trace_recursion;
  [...]

It took quite some time to trigger this build failure, because right now
BPF_SYSCALL is very obscure, depends on CONFIG_EXPERT. So also make BPF_SYSCALL
more configurable, not just under CONFIG_EXPERT.

If BPF_SYSCALL, tracing and kprobes are enabled then enable the bpf_tracing
gateway as well.

We might want to make this an interactive option later on, although
I'd not complicate it unnecessarily: enabling BPF_SYSCALL is enough of
an indicator that the user wants BPF support.

Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02 16:28:06 +02:00
Frans Klaver
fc454fdc10 init/main: fix reset_device comment
Fix incorrect spelling of situation.

Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-06 23:12:43 +01:00
Zefan Li
695df2132c cpuset: initialize cpuset a bit early
Now we call ss->bind() in cgroup_init(), so cgroup_init() will
call cpuset_bind() and then the latter will access top_cpuset's
cpumask, which is NULL, because cpuset_init() is called after
cgroup_init()

The simplest fix is to swap cgroup_init() and cpuset_init().

Cc: Vladimir Davydov <vdavydov@parallels.com>
Fixes: 295458e672 ("cgroup: call cgroup_subsys->bind on cgroup subsys initialization")
Reported by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vladimir Davydov <vdavydov@parallels.com>
2015-03-05 08:05:20 -05:00
Paul E. McKenney
ee42571f43 rcu: Add Kconfig option to expedite grace periods during boot
This commit adds a CONFIG_RCU_EXPEDITE_BOOT Kconfig parameter
that emulates a very early boot rcu_expedite_gp().  A late-boot
call to rcu_end_inkernel_boot() will provide the corresponding
rcu_unexpedite_gp().  The late-boot call to rcu_end_inkernel_boot()
should be made just before init is spawned.

According to Arjan:

> To show the boot time, I'm using the timestamp of the "Write protecting"
> line, that's pretty much the last thing we print prior to ring 3 execution.
>
> A kernel with default RCU behavior (inside KVM, only virtual devices)
> looks like this:
>
> [    0.038724] Write protecting the kernel read-only data: 10240k
>
> a kernel with expedited RCU (using the command line option, so that I
> don't have to recompile between measurements and thus am completely
> oranges-to-oranges)
>
> [    0.031768] Write protecting the kernel read-only data: 10240k
>
> which, in percentage, is an 18% improvement.

Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Arjan van de Ven <arjan@linux.intel.com>
2015-02-26 12:03:03 -08:00
Linus Torvalds
b11a278397 Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig updates from Michal Marek:
 "Yann E Morin was supposed to take over kconfig maintainership, but
  this hasn't happened.  So I'm sending a few kconfig patches that I
  collected:

   - Fix for missing va_end in kconfig
   - merge_config.sh displays used if given too few arguments
   - s/boolean/bool/ in Kconfig files for consistency, with the plan to
     only support bool in the future"

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: use va_end to match corresponding va_start
  merge_config.sh: Display usage if given too few arguments
  kconfig: use bool instead of boolean for type definition attributes
2015-02-19 10:36:45 -08:00
Linus Torvalds
7734334337 Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild changes from Michal Marek:
 "Just a few non-critical kbuild changes:

   - builddeb adds the actual distribution name in the changelog
   - documentation fixes"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: trivial - fix the help doc of CONFIG_CC_OPTIMIZE_FOR_SIZE
  kbuild: Update documentation of clean-files and clean-dirs
  builddeb: Try to determine distribution
  builddeb: Update year and git repository URL in debian/copyright
2015-02-19 10:31:37 -08:00
Andy Lutomirski
5125991c9a init: remove CONFIG_INIT_FALLBACK
CONFIG_INIT_FALLBACK adds config bloat without an obvious use case that
makes it worth keeping around.  Delete it.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Chuck Ebbert <cebbert.lkml@gmail.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rob Landley <rob@landley.net>
Cc: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 21:21:42 -08:00
Linus Torvalds
9d43bade34 Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Ingo Molnar:
 "Continued fallout of the conversion of the x86 IRQ code to the
  hierarchical irqdomain framework: more cleanups, simplifications,
  memory allocation behavior enhancements, mainly in the interrupt
  remapping and APIC code"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  x86, init: Fix UP boot regression on x86_64
  iommu/amd: Fix irq remapping detection logic
  x86/acpi: Make acpi_[un]register_gsi_ioapic() depend on CONFIG_X86_LOCAL_APIC
  x86: Consolidate boot cpu timer setup
  x86/apic: Reuse apic_bsp_setup() for UP APIC setup
  x86/smpboot: Sanitize uniprocessor init
  x86/smpboot: Move apic init code to apic.c
  init: Get rid of x86isms
  x86/apic: Move apic_init_uniprocessor code
  x86/smpboot: Cleanup ioapic handling
  x86/apic: Sanitize ioapic handling
  x86/ioapic: Add proper checks to setp/enable_IO_APIC()
  x86/ioapic: Provide stub functions for IOAPIC%3Dn
  x86/smpboot: Move smpboot inlines to code
  x86/x2apic: Use state information for disable
  x86/x2apic: Split enable and setup function
  x86/x2apic: Disable x2apic from nox2apic setup
  x86/x2apic: Add proper state tracking
  x86/x2apic: Clarify remapping mode for x2apic enablement
  x86/x2apic: Move code in conditional region
  ...
2015-02-09 16:57:56 -08:00
Thomas Gleixner
30b8b0066c init: Get rid of x86isms
The UP local API support can be set up from an early initcall. No need
for horrible hackery in the init code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211703.827943883@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22 15:10:56 +01:00
Paul E. McKenney
78e691f4ae Merge branches 'doc.2015.01.07a', 'fixes.2015.01.15a', 'preempt.2015.01.06a', 'srcu.2015.01.06a', 'stall.2015.01.16a' and 'torture.2015.01.11a' into HEAD
doc.2015.01.07a: Documentation updates.
fixes.2015.01.15a: Miscellaneous fixes.
preempt.2015.01.06a: Changes to handling of lists of preempted tasks.
srcu.2015.01.06a: SRCU updates.
stall.2015.01.16a: RCU CPU stall-warning updates and fixes.
torture.2015.01.11a: RCU torture-test updates and fixes.
2015-01-15 23:34:34 -08:00
Paul E. McKenney
a94844b22a rcu: Optionally run grace-period kthreads at real-time priority
Recent testing has shown that under heavy load, running RCU's grace-period
kthreads at real-time priority can improve performance (according to 0day
test robot) and reduce the incidence of RCU CPU stall warnings.  However,
most systems do just fine with the default non-realtime priorities for
these kthreads, and it does not make sense to expose the entire user
base to any risk stemming from this change, given that this change is
of use only to a few users running extremely heavy workloads.

Therefore, this commit allows users to specify realtime priorities
for the grace-period kthreads, but leaves them running SCHED_OTHER
by default.  The realtime priority may be specified at build time
via the RCU_KTHREAD_PRIO Kconfig parameter, or at boot time via the
rcutree.kthread_prio parameter.  Either way, 0 says to continue the
default SCHED_OTHER behavior and values from 1-99 specify that priority
of SCHED_FIFO behavior.  Note that a value of 0 is not permitted when
the RCU_BOOST Kconfig parameter is specified.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-15 23:25:04 -08:00
Masahiro Yamada
31a4af7f7d kbuild: trivial - fix the help doc of CONFIG_CC_OPTIMIZE_FOR_SIZE
Other than GCC, we have another choice, Clang for building the kernel
these days.  It seems better to say "compiler" rather than "gcc".

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-01-08 14:53:50 +01:00
Christoph Jaeger
6341e62b21 kconfig: use bool instead of boolean for type definition attributes
Support for keyword 'boolean' will be dropped later on.

No functional change.

Reference: http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.com
Signed-off-by: Christoph Jaeger <cj@linux.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-01-07 13:08:04 +01:00
Pranith Kumar
83fe27ea53 rcu: Make SRCU optional by using CONFIG_SRCU
SRCU is not necessary to be compiled by default in all cases. For tinification
efforts not compiling SRCU unless necessary is desirable.

The current patch tries to make compiling SRCU optional by introducing a new
Kconfig option CONFIG_SRCU which is selected when any of the components making
use of SRCU are selected.

If we do not select CONFIG_SRCU, srcu.o will not be compiled at all.

   text    data     bss     dec     hex filename
   2007       0       0    2007     7d7 kernel/rcu/srcu.o

Size of arch/powerpc/boot/zImage changes from

   text    data     bss     dec     hex filename
 831552   64180   23944  919676   e087c arch/powerpc/boot/zImage : before
 829504   64180   23952  917636   e0084 arch/powerpc/boot/zImage : after

so the savings are about ~2000 bytes.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
CC: Josh Triplett <josh@joshtriplett.org>
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: resolve conflict due to removal of arch/ia64/kvm/Kconfig. ]
2015-01-06 11:04:29 -08:00
Lai Jiangshan
5a43b88e98 rcu: Remove "select IRQ_WORK" from config TREE_RCU
The 48a7639ce8 ("rcu: Make callers awaken grace-period kthread")
removed the irq_work_queue(), so the TREE_RCU doesn't need
irq work any more.  This commit therefore updates RCU's Kconfig and

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-06 11:01:17 -08:00
Miklos Szeredi
10975933da init: fix read-write root mount
If mount flags don't have MS_RDONLY, iso9660 returns EACCES without actually
checking if it's an iso image.

This tricks mount_block_root() into retrying with MS_RDONLY.  This results
in a read-only root despite the "rw" boot parameter if the actual
filesystem was checked after iso9660.

I believe the behavior of iso9660 is okay, while that of mount_block_root()
is not.  It should rather try all types without MS_RDONLY and only then
retry with MS_RDONLY.

This change also makes the code more robust against the case when EACCES is
returned despite MS_RDONLY, which would've resulted in a lockup.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-17 08:27:14 -05:00
Linus Torvalds
603ba7e41b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile #2 from Al Viro:
 "Next pile (and there'll be one or two more).

  The large piece in this one is getting rid of /proc/*/ns/* weirdness;
  among other things, it allows to (finally) make nameidata completely
  opaque outside of fs/namei.c, making for easier further cleanups in
  there"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  coda_venus_readdir(): use file_inode()
  fs/namei.c: fold link_path_walk() call into path_init()
  path_init(): don't bother with LOOKUP_PARENT in argument
  fs/namei.c: new helper (path_cleanup())
  path_init(): store the "base" pointer to file in nameidata itself
  make default ->i_fop have ->open() fail with ENXIO
  make nameidata completely opaque outside of fs/namei.c
  kill proc_ns completely
  take the targets of /proc/*/ns/* symlinks to separate fs
  bury struct proc_ns in fs/proc
  copy address of proc_ns_ops into ns_common
  new helpers: ns_alloc_inum/ns_free_inum
  make proc_ns_operations work with struct ns_common * instead of void *
  switch the rest of proc_ns_operations to working with &...->ns
  netns: switch ->get()/->put()/->install()/->inum() to working with &net->ns
  make mntns ->get()/->put()/->install()/->inum() work with &mnt_ns->ns
  common object embedded into various struct ....ns
2014-12-16 15:53:03 -08:00
Linus Torvalds
a7c180aa7e As the merge window is still open, and this code was not as complex
as I thought it might be. I'm pushing this in now.
 
 This will allow Thomas to debug his irq work for 3.20.
 
 This adds two new features:
 
 1) Allow traceopoints to be enabled right after mm_init(). By passing
 in the trace_event= kernel command line parameter, tracepoints can be
 enabled at boot up. For debugging things like the initialization of
 interrupts, it is needed to have tracepoints enabled very early. People
 have asked about this before and this has been on my todo list. As it
 can be helpful for Thomas to debug his upcoming 3.20 IRQ work, I'm
 pushing this now. This way he can add tracepoints into the IRQ set up
 and have users enable them when things go wrong.
 
 2) Have the tracepoints printed via printk() (the console) when they
 are triggered. If the irq code locks up or reboots the box, having the
 tracepoint output go into the kernel ring buffer is useless for
 debugging. But being able to add the tp_printk kernel command line
 option along with the trace_event= option will have these tracepoints
 printed as they occur, and that can be really useful for debugging
 early lock up or reboot problems.
 
 This code is not that intrusive and it passed all my tests. Thomas tried
 them out too and it works for his needs.
 
  Link: http://lkml.kernel.org/r/20141214201609.126831471@goodmis.org
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUjv3kAAoJEEjnJuOKh9ldLNsIANAe5EmDCBw0WjR72n+G3qOH
 NC8calXfkjqHU0bv8Q3dRv20KH4MHOy6l4+EiV9/ovt71LOF3NEyUJ3HuShf9a8b
 sWcUhYbX3D1hViQe5sOzv9AWhBCFlKQGoNmQnydX9xa8ivRsBaTGJIGktWlHcwBE
 jF1i3fj3l3vRQSS8qZFXp3bzreunlGyPoSHcT6eWQeos+utj4sKwQWTLXTLQeM+6
 oQtFKRx7E5yX04qO1qFczS8qIEC6JH2C2jIRYEKUGepaELlnGkb8O7jQV/RaLF4/
 6P8VhZFG9YLS7fn7vWu0SnAN+Zwz5LzgjXAZt0FhGtIhLc18Oj8ouHH1UORsdQM=
 =Z4Un
 -----END PGP SIGNATURE-----

Merge tag 'trace-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "As the merge window is still open, and this code was not as complex as
  I thought it might be.  I'm pushing this in now.

  This will allow Thomas to debug his irq work for 3.20.

  This adds two new features:

  1) Allow traceopoints to be enabled right after mm_init().

     By passing in the trace_event= kernel command line parameter,
     tracepoints can be enabled at boot up.  For debugging things like
     the initialization of interrupts, it is needed to have tracepoints
     enabled very early.  People have asked about this before and this
     has been on my todo list.  As it can be helpful for Thomas to debug
     his upcoming 3.20 IRQ work, I'm pushing this now.  This way he can
     add tracepoints into the IRQ set up and have users enable them when
     things go wrong.

  2) Have the tracepoints printed via printk() (the console) when they
     are triggered.

     If the irq code locks up or reboots the box, having the tracepoint
     output go into the kernel ring buffer is useless for debugging.
     But being able to add the tp_printk kernel command line option
     along with the trace_event= option will have these tracepoints
     printed as they occur, and that can be really useful for debugging
     early lock up or reboot problems.

  This code is not that intrusive and it passed all my tests.  Thomas
  tried them out too and it works for his needs.

   Link: http://lkml.kernel.org/r/20141214201609.126831471@goodmis.org"

* tag 'trace-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Add tp_printk cmdline to have tracepoints go to printk()
  tracing: Move enabling tracepoints to just after rcu_init()
2014-12-16 12:53:59 -08:00
Steven Rostedt (Red Hat)
5f893b2639 tracing: Move enabling tracepoints to just after rcu_init()
Enabling tracepoints at boot up can be very useful. The tracepoint
can be initialized right after RCU has been. There's no need to
wait for the early_initcall() to be called. That's too late for some
things that can use tracepoints for debugging. Move the logic to
enable tracepoints out of the initcalls and into init/main.c to
right after rcu_init().

This also allows trace_printk() to be used early too.

Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412121539300.16494@nanos
Link: http://lkml.kernel.org/r/20141214164104.307127356@goodmis.org

Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-12-15 10:16:50 -05:00
Linus Torvalds
67e2c38838 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security layer updates from James Morris:
 "In terms of changes, there's general maintenance to the Smack,
  SELinux, and integrity code.

  The IMA code adds a new kconfig option, IMA_APPRAISE_SIGNED_INIT,
  which allows IMA appraisal to require signatures.  Support for reading
  keys from rootfs before init is call is also added"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits)
  selinux: Remove security_ops extern
  security: smack: fix out-of-bounds access in smk_parse_smack()
  VFS: refactor vfs_read()
  ima: require signature based appraisal
  integrity: provide a hook to load keys when rootfs is ready
  ima: load x509 certificate from the kernel
  integrity: provide a function to load x509 certificate from the kernel
  integrity: define a new function integrity_read_file()
  Security: smack: replace kzalloc with kmem_cache for inode_smack
  Smack: Lock mode for the floor and hat labels
  ima: added support for new kernel cmdline parameter ima_template_fmt
  ima: allocate field pointers array on demand in template_desc_init_fields()
  ima: don't allocate a copy of template_fmt in template_desc_init_fields()
  ima: display template format in meas. list if template name length is zero
  ima: added error messages to template-related functions
  ima: use atomic bit operations to protect policy update interface
  ima: ignore empty and with whitespaces policy lines
  ima: no need to allocate entry for comment
  ima: report policy load status
  ima: use path names cache
  ...
2014-12-14 20:36:37 -08:00
Joonsoo Kim
eefa864b70 mm/page_ext: resurrect struct page extending code for debugging
When we debug something, we'd like to insert some information to every
page.  For this purpose, we sometimes modify struct page itself.  But,
this has drawbacks.  First, it requires re-compile.  This makes us
hesitate to use the powerful debug feature so development process is
slowed down.  And, second, sometimes it is impossible to rebuild the
kernel due to third party module dependency.  At third, system behaviour
would be largely different after re-compile, because it changes size of
struct page greatly and this structure is accessed by every part of
kernel.  Keeping this as it is would be better to reproduce errornous
situation.

This feature is intended to overcome above mentioned problems.  This
feature allocates memory for extended data per page in certain place
rather than the struct page itself.  This memory can be accessed by the
accessor functions provided by this code.  During the boot process, it
checks whether allocation of huge chunk of memory is needed or not.  If
not, it avoids allocating memory at all.  With this advantage, we can
include this feature into the kernel in default and can avoid rebuild and
solve related problems.

Until now, memcg uses this technique.  But, now, memcg decides to embed
their variable to struct page itself and it's code to extend struct page
has been removed.  I'd like to use this code to develop debug feature, so
this patch resurrect it.

To help these things to work well, this patch introduces two callbacks for
clients.  One is the need callback which is mandatory if user wants to
avoid useless memory allocation at boot-time.  The other is optional, init
callback, which is used to do proper initialization after memory is
allocated.  Detailed explanation about purpose of these functions is in
code comment.  Please refer it.

Others are completely same with previous extension code in memcg.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 12:42:48 -08:00
Al Viro
707c5960f1 Merge branch 'nsfs' into for-next 2014-12-10 21:31:59 -05:00
Al Viro
e149ed2b80 take the targets of /proc/*/ns/* symlinks to separate fs
New pseudo-filesystem: nsfs.  Targets of /proc/*/ns/* live there now.
It's not mountable (not even registered, so it's not in /proc/filesystems,
etc.).  Files on it *are* bindable - we explicitly permit that in do_loopback().

This stuff lives in fs/nsfs.c now; proc_ns_fget() moved there as well.
get_proc_ns() is a macro now (it's simply returning ->i_private; would
have been an inline, if not for header ordering headache).
proc_ns_inode() is an ex-parrot.  The interface used in procfs is
ns_get_path(path, task, ops) and ns_get_name(buf, size, task, ops).

Dentries and inodes are never hashed; a non-counting reference to dentry
is stashed in ns_common (removed by ->d_prune()) and reused by ns_get_path()
if present.  See ns_get_path()/ns_prune_dentry/nsfs_evict() for details
of that mechanism.

As the result, proc_ns_follow_link() has stopped poking in nd->path.mnt;
it does nd_jump_link() on a consistent <vfsmount,dentry> pair it gets
from ns_get_path().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-10 21:30:20 -05:00
Andy Lutomirski
6ef4536e2f init: allow CONFIG_INIT_FALLBACK=n to disable defaults if init= fails
If a user puts init=/whatever on the command line and /whatever can't be
run, then the kernel will try a few default options before giving up.  If
init=/whatever came from a bootloader prompt, then this is unexpected but
probably harmless.  On the other hand, if it comes from a script (e.g.  a
tool like virtme or perhaps a future kselftest script), then the fallbacks
are likely to exist, but they'll do the wrong thing.  For example, they
might unexpectedly invoke systemd.

This adds a config option CONFIG_INIT_FALLBACK.  If unset, then a failure
to run the specified init= process be fatal.

The tentative plan is to remove CONFIG_INIT_FALLBACK for 3.20.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Rob Landley <rob@landley.net>
Cc: Chuck Ebbert <cebbert.lkml@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:12 -08:00
Johannes Weiner
9edad6ea0f mm: move page->mem_cgroup bad page handling into generic code
Now that the external page_cgroup data structure and its lookup is
gone, let the generic bad_page() check for page->mem_cgroup sanity.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Tejun Heo <tj@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:09 -08:00
Johannes Weiner
1306a85aed mm: embed the memcg pointer directly into struct page
Memory cgroups used to have 5 per-page pointers.  To allow users to
disable that amount of overhead during runtime, those pointers were
allocated in a separate array, with a translation layer between them and
struct page.

There is now only one page pointer remaining: the memcg pointer, that
indicates which cgroup the page is associated with when charged.  The
complexity of runtime allocation and the runtime translation overhead is
no longer justified to save that *potential* 0.19% of memory.  With
CONFIG_SLUB, page->mem_cgroup actually sits in the doubleword padding
after the page->private member and doesn't even increase struct page,
and then this patch actually saves space.  Remaining users that care can
still compile their kernels without CONFIG_MEMCG.

     text    data     bss     dec     hex     filename
  8828345 1725264  983040 11536649 b00909  vmlinux.old
  8827425 1725264  966656 11519345 afc571  vmlinux.new

[mhocko@suse.cz: update Documentation/cgroups/memory.txt]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:09 -08:00
Aneesh Kumar K.V
6f7c97e80b mm/numa balancing: rearrange Kconfig entry
Add the default enable config option after the NUMA_BALANCING option so
that it appears related in the nconfig interface.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:06 -08:00
Johannes Weiner
5b1efc027c kernel: res_counter: remove the unused API
All memory accounting and limiting has been switched over to the
lockless page counters.  Bye, res_counter!

[akpm@linux-foundation.org: update Documentation/cgroups/memory.txt]
[mhocko@suse.cz: ditch the last remainings of res_counter]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:04 -08:00
Johannes Weiner
71f87bee38 mm: hugetlb_cgroup: convert to lockless page counters
Abandon the spinlock-protected byte counters in favor of the unlocked
page counters in the hugetlb controller as well.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:04 -08:00
Johannes Weiner
3e32cb2e0a mm: memcontrol: lockless page counters
Memory is internally accounted in bytes, using spinlock-protected 64-bit
counters, even though the smallest accounting delta is a page.  The
counter interface is also convoluted and does too many things.

Introduce a new lockless word-sized page counter API, then change all
memory accounting over to it.  The translation from and to bytes then only
happens when interfacing with userspace.

The removed locking overhead is noticable when scaling beyond the per-cpu
charge caches - on a 4-socket machine with 144-threads, the following test
shows the performance differences of 288 memcgs concurrently running a
page fault benchmark:

vanilla:

   18631648.500498      task-clock (msec)         #  140.643 CPUs utilized            ( +-  0.33% )
         1,380,638      context-switches          #    0.074 K/sec                    ( +-  0.75% )
            24,390      cpu-migrations            #    0.001 K/sec                    ( +-  8.44% )
     1,843,305,768      page-faults               #    0.099 M/sec                    ( +-  0.00% )
50,134,994,088,218      cycles                    #    2.691 GHz                      ( +-  0.33% )
   <not supported>      stalled-cycles-frontend
   <not supported>      stalled-cycles-backend
 8,049,712,224,651      instructions              #    0.16  insns per cycle          ( +-  0.04% )
 1,586,970,584,979      branches                  #   85.176 M/sec                    ( +-  0.05% )
     1,724,989,949      branch-misses             #    0.11% of all branches          ( +-  0.48% )

     132.474343877 seconds time elapsed                                          ( +-  0.21% )

lockless:

   12195979.037525      task-clock (msec)         #  133.480 CPUs utilized            ( +-  0.18% )
           832,850      context-switches          #    0.068 K/sec                    ( +-  0.54% )
            15,624      cpu-migrations            #    0.001 K/sec                    ( +- 10.17% )
     1,843,304,774      page-faults               #    0.151 M/sec                    ( +-  0.00% )
32,811,216,801,141      cycles                    #    2.690 GHz                      ( +-  0.18% )
   <not supported>      stalled-cycles-frontend
   <not supported>      stalled-cycles-backend
 9,999,265,091,727      instructions              #    0.30  insns per cycle          ( +-  0.10% )
 2,076,759,325,203      branches                  #  170.282 M/sec                    ( +-  0.12% )
     1,656,917,214      branch-misses             #    0.08% of all branches          ( +-  0.55% )

      91.369330729 seconds time elapsed                                          ( +-  0.45% )

On top of improved scalability, this also gets rid of the icky long long
types in the very heart of memcg, which is great for 32 bit and also makes
the code a lot more readable.

Notable differences between the old and new API:

- res_counter_charge() and res_counter_charge_nofail() become
  page_counter_try_charge() and page_counter_charge() resp. to match
  the more common kernel naming scheme of try_do()/do()

- res_counter_uncharge_until() is only ever used to cancel a local
  counter and never to uncharge bigger segments of a hierarchy, so
  it's replaced by the simpler page_counter_cancel()

- res_counter_set_limit() is replaced by page_counter_limit(), which
  expects its callers to serialize against themselves

- res_counter_memparse_write_strategy() is replaced by
  page_counter_limit(), which rounds down to the nearest page size -
  rather than up.  This is more reasonable for explicitely requested
  hard upper limits.

- to keep charging light-weight, page_counter_try_charge() charges
  speculatively, only to roll back if the result exceeds the limit.
  Because of this, a failing bigger charge can temporarily lock out
  smaller charges that would otherwise succeed.  The error is bounded
  to the difference between the smallest and the biggest possible
  charge size, so for memcg, this means that a failing THP charge can
  send base page charges into reclaim upto 2MB (4MB) before the limit
  would have been reached.  This should be acceptable.

[akpm@linux-foundation.org: add includes for WARN_ON_ONCE and memparse]
[akpm@linux-foundation.org: add includes for WARN_ON_ONCE, memparse, strncmp, and PAGE_SIZE]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:04 -08:00
Al Viro
33c429405a copy address of proc_ns_ops into ns_common
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-04 14:34:47 -05:00
Al Viro
435d5f4bb2 common object embedded into various struct ....ns
for now - just move corresponding ->proc_inum instances over there

Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-04 14:31:00 -05:00
Ingo Molnar
d360b78f99 Merge branch 'rcu/next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU updates from Paul E. McKenney:

 - Streamline RCU's use of per-CPU variables, shifting from "cpu"
   arguments to functions to "this_"-style per-CPU variable accessors.

 - Signal-handling RCU updates.

 - Real-time updates.

 - Torture-test updates.

 - Miscellaneous fixes.

 - Documentation updates.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-11-20 08:57:58 +01:00
James Morris
a6aacbde40 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into next 2014-11-19 21:36:07 +11:00
Dmitry Kasatkin
c9cd2ce2bc integrity: provide a hook to load keys when rootfs is ready
Keys can only be loaded once the rootfs is mounted. Initcalls
are not suitable for that. This patch defines a special hook
to load the x509 public keys onto the IMA keyring, before
attempting to access any file. The keys are required for
verifying the file's signature. The hook is called after the
root filesystem is mounted and before the kernel calls 'init'.

Changes in v3:
* added more explanation to the patch description (Mimi)

Changes in v2:
* Hook renamed as 'integrity_load_keys()' to handle both IMA and EVM
  keys by integrity subsystem.
* Hook patch moved after defining loading functions

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-11-17 23:12:01 -05:00
Daniel Thompson
3438cf549d param: fix crash on bad kernel arguments
Currently if the user passes an invalid value on the kernel command line
then the kernel will crash during argument parsing. On most systems this
is very hard to debug because the console hasn't been initialized yet.

This is a regression due to commit 51e158c12a ("param: hand arguments
after -- straight to init") which, in response to the systemd debug
controversy, made it possible to explicitly pass arguments to init. To
achieve this parse_args() was extended from simply returning an error
code to returning a pointer. Regretably the new init args logic does not
perform a proper validity check on the pointer resulting in a crash.

This patch fixes the validity check. Should the check fail then no arguments
will be passed to init. This is reasonable and matches how the kernel treats
its own arguments (i.e. no error recovery).

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-11-11 17:03:19 +10:30