Normally successfully parsing a target means disk groups should exist,
but we don't want a BUG() or null ptr deref if we end up with an invalid
target.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since the copygc thread is now global and not per device, we're not
freeing up space on any one device in bounded time - and indeed we never
really were, since rebalance wasn't moving data around between devices
with that objective.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There's an inherent race with setting devices RO when they have dirty
btree nodes on them. We already check if a btree node is on an RO device
before we dirty it, so this patch just allows those writes so that we
don't have errors forcing the entire filesystem read only when trying to
remove a device.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We define our own BLK_STS_REMOVED, so we need our own to_str helper too.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a lockdep splat where we're allocating memory with vmalloc in
the compression bounce path, which doesn't always obey GFP_NOFS.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Improved error messages are always a good thing
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a bug where the BCH_WRITE_SKIP_CLOSURE_PUT was set
incorrectly, causing the completion to be delivered multiple times.
oops.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When a bkey_on_stack is passed to bch_read_indirect_extent, there is no
guarantee that it will be big enough to hold the bkey. And
bch_read_indirect_extent is not aware of bkey_on_stack to call realloc
on it. This cause a stack corruption.
This commit makes bch_read_indirect_extent aware of bkey_on_stack so it
can call realloc when appropriate.
Tested-by: Yuxuan Shui <yshuiv7@gmail.com>
Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
writes running out of a workqueue (via dio path) could block and prevent
other writes from calling bch2_write_index() and completing.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Internal writes (i.e. copygc/rebalance operations) shouldn't be blocking
on the allocator when we're going RO.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This updates bch2_rbio_narrow_crcs() to the current style for
transactional btree code, and fixes a rare panic on iterator overflow.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
All iterators should be released now with bch2_trans_iter_put(), so
TRANS_RESET_ITERS shouldn't be needed anymore, and TRANS_RESET_MEM is
always used.
Also convert more code to __bch2_trans_do().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes the background_compression option: wihout some way of marking
data as incompressible, rebalance will keep rewriting incompressible
data over and over.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes the bch2_read_retry_nodecode() path, we were resubmitting a
bio without properly reinitializing it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The trigger flags really belong with individual btree_insert_entries,
not the transaction commit flags - this splits out those flags and
unifies them with the BCH_BUCKET_MARK flags. Todo - split out
btree_trigger.c from buckets.c
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Helps for preventing things from getting out of sync.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
op->end_io may free the op struct
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It needs to be called when we get -EINTR due to e.g. lock restart - this
fixes a transaction iterators overflow bug.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Inline data extents + reflink is still broken
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
New helper function for setting incompatible feature bits
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This implements extents that have their data inline, in the value,
instead of the bkey value being pointers to the data - and the read and
write paths are updated to read from these new extent types and write
them out, when the write size is small enough.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This changes bch2_cut_front and bch2_cut_back so that they're able to
shorten the size of the value, and it also changes the extent update
path to update the accounting in the btree node when this happens.
When the size of the value is shortened, they zero out the space that's
no longer used, so it's interpreted as noops (as implemented in the last
patch).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This implements code for storing small bkeys on the stack and allocating
out of a mempool if they're too big.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The error path in bch2_write wasn't updated when the end_io callback was
added to bch_write_op.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds some horrible hacks, but the atomic ops for closures were
getting to be a pretty expensive part of the write path. We don't want
to rip out closures entirely from the write path, because they're used
for e.g. waiting on the allocator, or waiting on the journal flush, and
that stuff would get really ugly without closures.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_extent_ptr_decoded_append() is more general than we need here; we
know we're initializing a new extent so e.g. we're going to need the crc
entry.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We can't reuse bios without reinitializing them, and in the retry path
it's safer to just make sure we don't reuse them at all.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The generic IO path now handles inode updates for i_size and i_sectors -
this means we can drop a fair amount of code from fs-io.c.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The next few patches are going to be more moving the logic around
i_size/i_sectors updates to io.c, and better separating the Linux VFS
specific code from core bcachefs code, to better support the fuse port.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The btree_trans struct needs to memoize/cache btree iterators, so that
on transaction restart we don't have to completely redo btree lookups,
and so that we can do them all at once in the correct order when the
transaction had to restart to avoid a deadlock.
This switches the btree iterator lookups to work based on iterator
position, instead of trying to match them up based on the stack trace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
With reflink, various code now has to handle both KEY_TYPE_extent
or KEY_TYPE_reflink_v - so, convert it to be generic across all keys
with pointers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
for_each_btree_key() calls bch2_trans_get_iter() - we have to reset the
transaction state before getting the iterator again, in the retry path
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
With reflink, we'll no longer be able to calculate the offset of the
data we want into the extent we're reading from from the extent pos and
the iter pos - we'll have to pass it in separately.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bio_uncompress_inplace() used to potentially need to extend the bio to
be big enough for the uncompressed data, which has become problematic
with multipage bvecs - but, the move extent path actually already
allocated the bios to be big enough for the uncompressed data.
The promote path needed to be fixed, though.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Switch to always using bio_add_page(), which merges contiguous pages now
that we have multipage bvecs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch_write_op->written used to be a u16, but it's not so the assertion
isn't needed anymore - and 5.1 can send larger bios.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
this lets us get rid of a lot of extra switch statements - in a lot of
places we dispatch on the btree node type, and then the key type, so
this is a nice cleanup across a lot of code.
Also improve the on disk format versioning stuff.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This new helper for the move path avoids creating a new CRC entry when
we already have one that matches the pointer being added.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_alloc_sectors_start() was a nightmare to work with - it's got some
tricky stuff to do, since it wants to use the buckets the writepoint
already has, unless they're not in the target it wants to write to,
unless it can't allocate from any other devices in which case it will
use those buckets if it has to - et cetera.
This restructures the code to start with a new empty list of open
buckets we're going to use for the new allocation, pulling buckets from
the write point's list as we decide that we really are going to use
them - making the code somewhat more functional and drastically easier
to understand.
Also fixes a bug where we could end up waiting on c->freelist_wait
(because allocating from one device failed) but return success from
bch2_bucket_alloc(), because allocating from a different device
succeeded.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Initially forked from drivers/md/bcache, bcachefs is a new copy-on-write
filesystem with every feature you could possibly want.
Website: https://bcachefs.org
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
