This introduces support for the remoteproc on Mediatek MT8188, and
enables caches for MT8186 SCP. It adds support for PRU cores found on
the TI K3 AM62x SoCs.
It moves the recovery work after a firmware crash to an unbound
workqueue, to allow recovery to happen in parallel.
A new DMA API is introduced to release dma_mem for a device.
It adds support a panic handler for the Qualcomm modem remoteproc, with
the goal of having caches flushed in memory dumps for post-mortem
debugging and it introduces a mechanism to wait for the modem firmware
on SM8450 to decrypt part of its memory for post-mortem debugging.
Qualcomm sysmon is restricted to only inform remote processors about
peers that are actually running, to avoid a race where Linux tries to
notify a recovering remote processor about its peers new state. A
mechanism for waiting for the sysmon connection to be established is also
introduced, to avoid out-of-sync updates for rapidly restarting remote
processors.
A number of Devicetree binding cleanups and conversions to YAML are
introduced, to facilitate Devicetree validation. Lastly it introduces a
number of smaller fixes and cleanups in the core and a few different
drivers.
-----BEGIN PGP SIGNATURE-----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=gbAX
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"This introduces support for the remoteproc on Mediatek MT8188, and
enables caches for MT8186 SCP. It adds support for PRU cores found on
the TI K3 AM62x SoCs.
It moves the recovery work after a firmware crash to an unbound
workqueue, to allow recovery to happen in parallel.
A new DMA API is introduced to release dma_mem for a device.
It adds support a panic handler for the Qualcomm modem remoteproc,
with the goal of having caches flushed in memory dumps for post-mortem
debugging and it introduces a mechanism to wait for the modem firmware
on SM8450 to decrypt part of its memory for post-mortem debugging.
Qualcomm sysmon is restricted to only inform remote processors about
peers that are actually running, to avoid a race where Linux tries to
notify a recovering remote processor about its peers new state. A
mechanism for waiting for the sysmon connection to be established is
also introduced, to avoid out-of-sync updates for rapidly restarting
remote processors.
A number of Devicetree binding cleanups and conversions to YAML are
introduced, to facilitate Devicetree validation. Lastly it introduces
a number of smaller fixes and cleanups in the core and a few different
drivers"
* tag 'rproc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (42 commits)
remoteproc: qcom_q6v5_pas: Do not fail if regulators are not found
drivers/remoteproc: fix repeated words in comments
remoteproc: Directly use ida_alloc()/free()
remoteproc: Use unbounded workqueue for recovery work
remoteproc: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators
remoteproc: sysmon: Send sysmon state only for running rprocs
remoteproc: sysmon: Wait for SSCTL service to come up
remoteproc: qcom: q6v5: Set q6 state to offline on receiving wdog irq
remoteproc: qcom: pas: Check if coredump is enabled
remoteproc: qcom: pas: Mark devices as wakeup capable
remoteproc: qcom: pas: Mark va as io memory
remoteproc: qcom: pas: Add decrypt shutdown support for modem
remoteproc: qcom: q6v5-mss: add powerdomains to MSM8996 config
remoteproc: qcom_q6v5: Introduce panic handler for MSS
remoteproc: qcom_q6v5_mss: Update MBA log info
remoteproc: qcom: correct kerneldoc
remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use
remoteproc: qcom: using pm_runtime_resume_and_get to simplify the code
remoteproc: mediatek: Support MT8188 SCP
...
Add a flags member to the dma_map_ops structure with one flag to
indicate support for PCI P2PDMA.
Also, add a helper to check if a device supports PCI P2PDMA.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add pci_p2pdma_map_segment() as a helper for dma_map_sg()
implementations. It takes an scatterlist segment that must point to a
pci_p2pdma struct page and will map it if the mapping requires a bus
address.
The return value indicates whether the mapping required a bus address
or whether the caller still needs to map the segment normally. If the
segment should not be mapped, -EREMOTEIO is returned.
This helper uses a state structure to track the changes to the
pgmap across calls and avoid needing to lookup into the xarray for
every page.
The prototype for the helper is added to dma-map-ops.h as it is only
useful to dma map implementations and don't need to pollute the public
pci-p2pdma header.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Streaming DMA mapping involving an IOMMU may be much slower for larger
total mapping size. This is because every IOMMU DMA mapping requires an
IOVA to be allocated and freed. IOVA sizes above a certain limit are not
cached, which can have a big impact on DMA mapping performance.
Provide an API for device drivers to know this "optimal" limit, such that
they may try to produce mapping which don't exceed it.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If CONFIG_DMA_DECLARE_COHERENT is not set,
make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu- will be failed, like this:
drivers/remoteproc/remoteproc_core.c: In function ‘rproc_rvdev_release’:
./include/linux/dma-map-ops.h:182:42: error: statement with no effect [-Werror=unused-value]
#define dma_release_coherent_memory(dev) (0)
^
drivers/remoteproc/remoteproc_core.c:464:2: note: in expansion of macro ‘dma_release_coherent_memory’
dma_release_coherent_memory(dev);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The return type of function dma_release_coherent_memory in CONFIG_DMA_DECLARE_COHERENT area is void, so in !CONFIG_DMA_DECLARE_COHERENT area it should neither return any value nor be defined as zero.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e61c451476 ("dma-mapping: Add dma_release_coherent_memory to DMA API")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220630123528.251181-1-renzhijie2@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add dma_release_coherent_memory to DMA API to allow dma
user call it to release dev->dma_mem when the device is
removed.
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220422062436.14384-2-mark-pk.tsai@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Only build the code to support the global coherent pool if support for
it is enabled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Dillon Min <dillon.minfei@gmail.com>
Add a new helper to initialize the global coherent pool. This both
cleans up the existing initialization which indirects through the
reserved_mem_ops that are normally only used for struct device, and
also allows using the global pool for non-devicetree architectures.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Dillon Min <dillon.minfei@gmail.com>
Allow dma_map_sgtable() to pass errors from the map_sg() ops. This
will be required for returning appropriate error codes when mapping
P2PDMA memory.
Introduce __dma_map_sg_attrs() which will return the raw error code
from the map_sg operation (whether it be negative or zero). Then add a
dma_map_sg_attrs() wrapper to convert any negative errors to zero to
satisfy the existing calling convention.
dma_map_sgtable() defines three error codes that .map_sg implementations
are allowed to return: -EINVAL, -ENOMEM and -EIO. The latter of which
is a generic return for cases that are passing DMA_MAPPING_ERROR
through.
dma_map_sgtable() will convert a zero error return for old map_sg() ops
into a -EIO return and return any negative errors as reported.
This allows map_sg implementations to start returning multiple
negative error codes. Legacy map_sg implementations can continue
to return zero until they are all converted.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a new API that returns a potentiall virtually non-contigous sg_table
and a DMA address. This API is only properly implemented for dma-iommu
and will simply return a contigious chunk as a fallback.
The intent is that drivers can use this API if either:
- no kernel mapping or only temporary kernel mappings are required.
That is as a better replacement for DMA_ATTR_NO_KERNEL_MAPPING
- a kernel mapping is required for cached and DMA mapped pages, but
the driver also needs the pages to e.g. map them to userspace.
In that sense it is a replacement for some aspects of the recently
removed and never fully implemented DMA_ATTR_NON_CONSISTENT
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org>
- add support to emulate processing delays in the DMA API benchmark
selftest (Barry Song)
- remove support for non-contiguous noncoherent allocations,
which aren't used and will be replaced by a different API
-----BEGIN PGP SIGNATURE-----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=papz
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.12' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- add support to emulate processing delays in the DMA API benchmark
selftest (Barry Song)
- remove support for non-contiguous noncoherent allocations, which
aren't used and will be replaced by a different API
* tag 'dma-mapping-5.12' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: remove the {alloc,free}_noncoherent methods
dma-mapping: benchmark: pretend DMA is transmitting
Lift the dma_default_coherent variable from the mips architecture code
to the driver core. This allows an architecture to sdefault all device
to be DMA coherent at run time, even if the kernel is build with support
for DMA noncoherent device. By allowing device_initialize to set the
->dma_coherent field to this default the amount of arch hooks required
for this behavior can be greatly reduced.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
It turns out allowing non-contigous allocations here was a rather bad
idea, as we'll now need to define ways to get the pages for mmaping
or dma_buf sharing. Revert this change and stick to the original
concept. A different API for the use case of non-contigous allocations
will be added back later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org>:wq
- support for a partial IOMMU bypass (Alexey Kardashevskiy)
- add a DMA API benchmark (Barry Song)
- misc fixes (Tiezhu Yang, tangjianqiang)
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl/iF+wLHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYP/HQ//beE+HGi0+5yiWdLY/Q3nqT/VExgdY2CAE2en0jcs
kpUEZPfhE2dlKPf9nBl+ZsLIgqIwVP+oSawxZ65r0z/w95vgWANAmBg2m/FcnEUx
Vl6jUUPmViY0AGzMR1+55voNNor4aX9rLUdZEN+vBy62Z6fvQVmKOtVPUf0ekkUh
n3factrKIt7mplsIgJPO3v6G2XHugBaNmcrp9LkkmhniYkH8S31l4uKCSKI+6atT
CsTTVqpQ+qVAyrgp30Xs+N9QoOefI4tFdXmvXzIIFe3JyDvIpniaiT+HHVXuEQJR
5Yukj9sKJXS1ipjc+yWsjvn4Wax/tubJ7eqIo9alsIkcJXI3AlKljwBtFrKPMq+L
NK54N3N31A+/hrxOLQyfqz5vH6cUicFr7STIedb8pD3y3/f/tiP+/qown6Wj3rB/
E0IlCK5w87OVrJT1f5fHxh9Xe4R2W9rpeU/v/AZ/DrQllwp3PbG0kWqu3m4mujih
CF3D+rOoB5tNtBxrNU+TpOVm+OOdX1IDtBleKePHTTIQeBY3p3UZuwINO0axFr9p
oQndj1fiYvRwI6GS31GPpduFG7PrrwCb5zD0Rm07+aNCIoSmu+ADEngfgxnj/rGz
q+c9Te1dDn58OktkiEONPNu+iuGBxhBR7AeP6UDdcC1vkO/hvW2HnppSY0qiWthU
IFY=
=dOug
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support for a partial IOMMU bypass (Alexey Kardashevskiy)
- add a DMA API benchmark (Barry Song)
- misc fixes (Tiezhu Yang, tangjianqiang)
* tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mapping:
selftests/dma: add test application for DMA_MAP_BENCHMARK
dma-mapping: add benchmark support for streaming DMA APIs
dma-contiguous: fix a typo error in a comment
dma-pool: no need to check return value of debugfs_create functions
powerpc/dma: Fallback to dma_ops when persistent memory present
dma-mapping: Allow mixing bypass and mapped DMA operation
At the moment we allow bypassing DMA ops only when we can do this for
the entire RAM. However there are configs with mixed type memory
where we could still allow bypassing IOMMU in most cases;
POWERPC with persistent memory is one example.
This adds an arch hook to determine where bypass can still work and
we invoke direct DMA API. The following patch checks the bus limit
on POWERPC to allow or disallow direct mapping.
This adds a ARCH_HAS_DMA_MAP_DIRECT config option to make the arch_xxxx
hooks no-op by default.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Drop the dma_direct_set_offset export and move the declaration to
dma-map-ops.h now that the Allwinner drivers have stopped calling it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Due to a mismerge a bunch of prototypes that should have moved to
dma-map-ops.h are still in dma-mapping.h, fix that up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Use and entirely separate code path for the DMA_ATTR_NO_KERNEL_MAPPING
path. This avoids any confusion about the ret type, and avoids lots of
attr checks and helpers that can be significantly simplified now.
It also ensures that common handling is applied to architetures still
using the arch alloc/free hooks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Most of dma-debug.h is not required by anything outside of kernel/dma.
Move the four declarations needed by dma-mappin.h or dma-ops providers
into dma-mapping.h and dma-map-ops.h, and move the remainder of the
file to kernel/dma/debug.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Merge dma-contiguous.h into dma-map-ops.h, after removing the comment
describing the contiguous allocator into kernel/dma/contigous.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Split out all the bits that are purely for dma_map_ops implementations
and related code into a new <linux/dma-map-ops.h> header so that they
don't get pulled into all the drivers. That also means the architecture
specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h>
any more, which leads to a missing includes that were pulled in by the
x86 or arm versions in a few not overly portable drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
