Add new definitions for NVMe In-band authentication as defined in
the NVMe Base Specification v2.0.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the NVM Express Revision 1.4 spec, Figure 145 describes possible
values for an AER with event type "Error" (value 000b). For a
Persistent Internal Error (value 03h), the host should perform a
controller reset.
Add support for this error using code that already exists for
doing a controller reset. As part of this support, introduce
two utility functions for parsing the AER type and subtype.
This new support was tested in a lab environment where we can
generate the persistent internal error on demand, and observe
both the Linux side and NVMe controller side to see that the
controller reset has been done.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This will allow the trace event to know the full size of the data
intended to be copied and silence read overflow checks.
Reported-by: John Garry <john.garry@huawei.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Adjust the values of NVME_CAP_CRMS_CRIMS and NVME_CAP_CRMS_CRWMS masks as
they are different from the ones in TP4084 - Time-to-ready.
Fixes: 354201c53e ("nvme: add support for TP4084 - Time-to-Ready Enhancements").
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add support for using longer timeouts during controller initialization
and letting the controller come up with namespaces that are not ready
for I/O yet. We skip these not ready namespaces during scanning and
only bring them online once anoter scan is kicked off by the AEN that
is set when the NRDY bit gets set in the I/O Command Set Independent
Identify Namespace Data Structure. This asynchronous probing avoids
blocking the kernel boot when controllers take a very long time to
recover after unclean shutdowns (up to minutes).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Instead of having one big enum add one for each register or field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Log a few more path related status codes.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=0Axq
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-block
Pull block driver fixes from Jens Axboe:
"Followup block driver updates and fixes for the 5.18-rc1 merge window.
In detail:
- NVMe pull request
- Fix multipath hang when disk goes live over reconnect (Anton
Eidelman)
- fix RCU hole that allowed for endless looping in multipath
round robin (Chris Leech)
- remove redundant assignment after left shift (Colin Ian King)
- add quirks for Samsung X5 SSDs (Monish Kumar R)
- fix the read-only state for zoned namespaces with unsupposed
features (Pankaj Raghav)
- use a private workqueue instead of the system workqueue in
nvmet (Sagi Grimberg)
- allow duplicate NSIDs for private namespaces (Sungup Moon)
- expose use_threaded_interrupts read-only in sysfs (Xin Hao)"
- nbd minor allocation fix (Zhang)
- drbd fixes and maintainer addition (Lars, Jakob, Christoph)
- n64cart build fix (Jackie)
- loop compat ioctl fix (Carlos)
- misc fixes (Colin, Dongli)"
* tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-block:
drbd: remove check of list iterator against head past the loop body
drbd: remove usage of list iterator variable after loop
nbd: fix possible overflow on 'first_minor' in nbd_dev_add()
MAINTAINERS: add drbd co-maintainer
drbd: fix potential silent data corruption
loop: fix ioctl calls using compat_loop_info
nvme-multipath: fix hang when disk goes live over reconnect
nvme: fix RCU hole that allowed for endless looping in multipath round robin
nvme: allow duplicate NSIDs for private namespaces
nvmet: remove redundant assignment after left shift
nvmet: use a private workqueue instead of the system workqueue
nvme-pci: add quirks for Samsung X5 SSDs
nvme-pci: expose use_threaded_interrupts read-only in sysfs
nvme: fix the read-only state for zoned namespaces with unsupposed features
n64cart: convert bi_disk to bi_bdev->bd_disk fix build
xen/blkfront: fix comment for need_copy
xen-blkback: remove redundant assignment to variable i
A NVMe subsystem with multiple controller can have private namespaces
that use the same NSID under some conditions:
"If Namespace Management, ANA Reporting, or NVM Sets are supported, the
NSIDs shall be unique within the NVM subsystem. If the Namespace
Management, ANA Reporting, and NVM Sets are not supported, then NSIDs:
a) for shared namespace shall be unique; and
b) for private namespace are not required to be unique."
Reference: Section 6.1.6 NSID and Namespace Usage; NVM Express 1.4c spec.
Make sure this specific setup is supported in Linux.
Fixes: 9ad1927a3b ("nvme: always search for namespace head")
Signed-off-by: Sungup Moon <sungup.moon@samsung.com>
[hch: refactored and fixed the controller vs subsystem based naming
conflict]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
NVM Express ratified TP 4068 defines new protection information formats.
Implement support for the CRC64 guard tags.
Since the block layer doesn't support variable length reference tags,
driver support for the Storage Tag space is not supported at this time.
Cc: Hannes Reinecke <hare@suse.de>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Klaus Jensen <its@irrelevant.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220303201312.3255347-9-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
TP8010 introduces the Discovery Controller Type attribute (dctype).
The dctype is returned in the response to the Identify command. This
patch exposes the dctype through the sysfs. Since the dctype depends on
the Controller Type (cntrltype), another attribute of the Identify
response, the patch also exposes the cntrltype as well. The dctype will
only be displayed for discovery controllers.
A note about the naming of this attribute:
Although TP8010 calls this attribute the Discovery Controller Type,
note that the dctype is now part of the response to the Identify
command for all controller types. I/O, Discovery, and Admin controllers
all share the same Identify response PDU structure. Non-discovery
controllers as well as pre-TP8010 discovery controllers will continue
to set this field to 0 (which has always been the default for reserved
bytes). Per TP8010, the value 0 now means "Discovery controller type is
not reported" instead of "Reserved". One could argue that this
definition is correct even for non-discovery controllers, and by
extension, exposing it in the sysfs for non-discovery controllers is
appropriate.
Signed-off-by: Martin Belanger <martin.belanger@dell.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Improves logging of NVMe errors. If NVME_VERBOSE_ERRORS is configured,
a verbose description of the error is logged, otherwise only status
codes/bits is logged.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
[kch]: fix several nits, cosmetics, and trim down code.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
TP8014 adds a new SUBTYPE value and a new field EFLAGS for the
discovery log page entry.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This makes the code more readable.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
NVMe TP 4053 – Zoned Namespaces (ZNS) allows host software to
communicate with a non-volatile memory subsystem using zones for NVMe
protocol-based controllers. NVMeOF already support the ZNS NVMe
Protocol compliant devices on the target in the passthru mode. There
are generic zoned block devices like Shingled Magnetic Recording (SMR)
HDDs that are not based on the NVMe protocol.
This patch adds ZNS backend support for non-ZNS zoned block devices as
NVMeOF targets.
This support includes implementing the new command set NVME_CSI_ZNS,
adding different command handlers for ZNS command set such as NVMe
Identify Controller, NVMe Identify Namespace, NVMe Zone Append,
NVMe Zone Management Send and NVMe Zone Management Receive.
With the new command set identifier, we also update the target command
effects logs to reflect the ZNS compliant commands.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
NVMe TP 4056 allows controllers to support different command sets.
NVMeoF target currently only supports namespaces that contain
traditional logical blocks that may be randomly read and written. In
some applications there is a value in exposing namespaces that contain
logical blocks that have special access rules (e.g. sequentially write
required namespace such as Zoned Namespace (ZNS)).
In order to support the Zoned Block Devices (ZBD) backend, controllers
need to have support for ZNS Command Set Identifier (CSI).
In this preparation patch, we adjust the code such that it can now
support the default command set identifier. We update the namespace data
structure to store the CSI value which defaults to NVME_CSI_NVM
that represents traditional logical blocks namespace type.
The CSI support is required to implement the ZBD backend for NVMeOF
with host side NVMe ZNS interface, since ZNS commands belong to
the different command set than the default one.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commands that access LBA contents without a data transfer between the
host historically have not had a spec defined upper limit. The driver
set the queue constraints for such commands to the max data transfer
size just to be safe, but this artificial constraint frequently limits
devices below their capabilities.
The NVMe Workgroup ratified TP4040 defines how a controller may
advertise their non-MDTS limits. Use these if provided and default to
the current constraints if not. Since the Dataset Management command
limits are defined in logical blocks, but without a namespace to tell us
the logical block size, the code defaults to the safe 512b size.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When support for the NVMe ZNS commands was merged, tracing of these has
been omitted.
Add nvme_cmd_zone_mgmt_send, nvme_cmd_zone_mgmt_recv as well as
nvme_cmd_zone_append to the nvme driver's tracing facility.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
All the updates are mentioned in the ratified NVMe 1.4 spec.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Since NVMe v1.4 the Controller Memory Buffer must be explicitly enabled
by the host.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
[hch: avoid a local variable and add a comment]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add passthru command handling capability for the NVMeOF target and
export passthru APIs which are used to integrate passthru
code with nvmet-core.
The new file passthru.c handles passthru cmd parsing and execution.
In the passthru mode, we create a block layer request from the nvmet
request and map the data on to the block layer request.
Admin commands and features are on an allow list as there are a number
of each that don't make too much sense with passthrough. We use an
allow list such that new commands can be considered before being blindly
passed through. In both cases, vendor specific commands are always
allowed.
We also reject reservation IO commands as the underlying device cannot
differentiate between multiple hosts behind a fabric.
Based-on-a-patch-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add support for NVM Express Zoned Namespaces (ZNS) Command Set defined
in NVM Express TP4053. Zoned namespaces are discovered based on their
Command Set Identifier reported in the namespaces Namespace
Identification Descriptor list. A successfully discovered Zoned
Namespace will be registered with the block layer as a host managed
zoned block device with Zone Append command support. A namespace that
does not support append is not supported by the driver.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Keith Busch <keith.busch@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The Commands Supported and Effects log page was extended with a CSI
field that enables the host to query the log page for each command set
supported. Retrieve this log page for each command set that an attached
namespace supports, and save a pointer to that log in the namespace head.
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <keith.busch@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Implements support for multiple I/O Command Sets. NVMe TP 4056
introduces a method to enumerate multiple command sets per namespace. If
the command set is exposed, this method for enumeration will be used
instead of the traditional method that uses the CC.CSS register command
set register for command set identification.
For namespaces where the Command Set Identifier is not supported or
recognized, the specific namespace will not be created.
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The enumerations will be used to expose the namespace metadata format by
the target.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Improve code readability by defining the specification's constants that
the driver is using when decoding identification payloads.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With reference to the NVMeOF Specification (page 44, Figure 38)
discovery log page entry provides address family field. We do set the
transport type field but the adrfam field is not set when using loop
transport and also it doesn't have support in the nvme-cli. So when
reading discovery log page with a loop transport it leads to confusing
output.
As per the spec for adrfam value 254 is reserved for Intra Host
Transport i.e. loopback), we add a required macro in the protocol
header file, set default port disc addr entry's adrfam to
NVMF_ADDR_FAMILY_MAX, and update nvmet_addr_family configfs array for
show/store attribute.
Without this patch, setting adrfam to (ipv4/ipv6/ib/fc/loop/" ") we get
following output for nvme discover command from nvme-cli which is
confusing.
trtype: loop
adrfam: ipv4
trtype: loop
adrfam: ipv6
trtype: loop
adrfam: infiniband
trtype: loop
adrfam: fibre-channel
trtype: loop # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = loop
adrfam: pci # <----- pci for loop
trtype: loop # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = " "
adrfam: pci # <----- pci for unrecognized
This patch fixes above output :-
trtype: loop
adrfam: ipv4
trtype: loop
adrfam: ipv6
trtype: loop
adrfam: infiniband
trtype: loop
adrfam: fibre-channel
trtype: loop # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = loop
adrfam: loop # <----- loop for loop
trtype: loop # ${CFGFS_HOME}/config/nvmet/ports/adrfam = " "
adrfam: unrecognized # <----- unrecognized when invalid value
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
According to the NVMe specification, the over temperature threshold and
under temperature threshold features shall be implemented for Composite
Temperature if a non-zero WCTEMP field value is reported in the Identify
Controller data structure. The features are also implemented for all
implemented temperature sensors (i.e., all Temperature Sensor fields that
report a non-zero value).
This provides the over temperature threshold and under temperature
threshold for each sensor as temperature min and max values of hwmon
sysfs attributes.
The WCTEMP is already provided as a temperature max value for Composite
Temperature, but this change isn't incompatible. Because the default
value of the over temperature threshold for Composite Temperature is
the WCTEMP.
Now the alarm attribute for Composite Temperature indicates one of the
temperature is outside of a temperature threshold. Because there is only
a single bit in Critical Warning field that indicates a temperature is
outside of a threshold.
Example output from the "sensors" command:
nvme-pci-0100
Adapter: PCI adapter
Composite: +33.9°C (low = -273.1°C, high = +69.8°C)
(crit = +79.8°C)
Sensor 1: +34.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +31.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 5: +47.9°C (low = -273.1°C, high = +65261.8°C)
This also adds helper macros for kelvin from/to milli Celsius conversion,
and replaces the repeated code in hwmon.c.
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Jean Delvare <jdelvare@suse.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Update enumerations and structures in include/linux/nvme.h
to resync with the nvmecli.
All the updates are mentioned in the ratified NVMe 1.4 spec
https://nvmexpress.org/wp-content/uploads/NVM-Express-1_4-2019.06.10-Ratified.pdf
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix the status code of canceled requests initiated by the host according
to TP4028 (Status Code 0x371):
"Command Aborted By host: The command was aborted as a result of host
action (e.g., the host disconnected the Fabric connection)."
Also in a multipath environment, unless otherwise specified, errors of
this type (path related) should be retried using a different path, if
one is available.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The size of a submission queue element should always be 6 (64 bytes)
by spec.
However some controllers such as Apple's are not properly implementing
the standard and require a different size.
This provides the ground work for the subsequent quirks for these
controllers.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
This patch adds Get LBA Status command's opcode to the macro that is
used by the trace feature. Now we can see "get_lba_status" instead of
the opcode value itself.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
NVMe 1.4 added Get LBA Status command with opcode 0x86.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Several new fields have been introduced in version 1.4 of the NVMe spec
at offsets that were defined as reserved in version 1.3d of the NVMe
spec. Update the definition of the nvme_id_ns data structure such that
it is in sync with version 1.4 of the NVMe spec. This change preserves
backwards compatibility.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch introduces fabrics commands tracing feature from host-side.
This patch does not include any changes for the previous host-side
tracing, but just add fabrics commands parsing in cmd=() format.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
[hch: fixed some whitespace damage]
Signed-off-by: Christoph Hellwig <hch@lst.de>
The following patches are going to provide the target-side trace which
might need these kind of macros. It would be great if it can be shared
between host and target side both.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch introduces a nvme_is_fabrics() inline function to check
whether or not the given command structure is for fabrics.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The nvme target hadn't been taking the Get Log Page offset parameter
into consideration, and so has been returning corrupted log pages when
offsets are used. Since many tools, including nvme-cli, split the log
request to 4k, we've been breaking discovery log responses when more
than 3 subsystems exist.
Fix the returned data by internally generating the entire discovery
log page and copying only the requested bytes into the user buffer. The
command log page offset type has been modified to a native __le64 to
make it easier to extract the value from a command.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We already have a ЅPDX header, so no need to duplicate the information.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
This patch adds the NVMe error slot definition from the spec.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This is a preparation patch which removes the nvme common command cdw10
array and replace with individual fields. This is needed for the nvmet
error log page implementation make is error log page entry offset
assignment easier.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
A controller may have an internal state that is not able to successfully
process commands for a short duration. In such states, an immediate
command requeue is expected to fail. The driver may exceed its max
retry count, which permanently ends the command in failure when the same
command would succeed after waiting for the controller to be ready.
NVMe ratified TP 4033 provides a delay hint in the completion status
code for failed commands. Implement the retry delay based on the command
completion status and the controller's requested delay.
Note that requeued commands are handled per request_queue, not per
individual request. If multiple commands fail, the controller should
consistently report the desired delay time for retryable commands in
all CQEs, otherwise the requeue list may be kicked too soon.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Technical Proposal introduces an indication for SQ flow control
disable support. Expose it since we are able to operate in this mode.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only override the allowed parts of it.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
[hch: slight tweak to the NVME_TREQ_SECURE_CHANNEL_MASK definition]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Technical proposal 8005 "fabrics SQ flow control" introduces a mode
where a host and controller agree to omit sq_head pointer updates
when sending nvme completions.
In case the host indicated desire to operate in this mode (connect attribute)
the controller will return back a connect completion with sq_head value
of 0xffff as indication that it will omit sq_head pointer updates.
This mode saves us an atomic update in the I/O path.
Reviewed-by: Hannes Reinecke <hare@suse.com>
[hch: suggested better implementation]
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>