MediaFailure and VolumeDirty should be retained if these are set before
mounting.
In '3.1.13.3 Media Failure Field' of exfat specification describe:
If, upon mounting a volume, the value of this field is 1,
implementations which scan the entire volume for media failures and
record all failures as "bad" clusters in the FAT (or otherwise resolve
media failures) may clear the value of this field to 0.
Therefore, We should not clear MediaFailure without scanning volume.
In '8.1 Recommended Write Ordering' of exfat specification describe:
Clear the value of the VolumeDirty field to 0, if its value prior to
the first step was 0.
Therefore, We should not clear VolumeDirty after mounting.
Also rename ERR_MEDIUM to MEDIA_FAILURE.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Replace part of exfat_zeroed_cluster() with exfat_update_bhs().
And remove exfat_sync_bhs().
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Write multiple sectors at once when updating dir-entries.
Add exfat_update_bhs() for that. It wait for write completion once
instead of sector by sector.
It's only effective if sync enabled.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
This flag is set/reset in exfat_put_super()/exfat_sync_fs()
to avoid sync_blockdev().
- exfat_put_super():
Before calling this, the VFS has already called sync_filesystem(),
so sync is never performed here.
- exfat_sync_fs():
After calling this, the VFS calls sync_blockdev(), so, it is meaningless
to check EXFAT_SB_DIRTY or to bypass sync_blockdev() here.
Remove the EXFAT_SB_DIRTY check to ensure synchronization.
And remove the code related to the flag.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
On-disk format for name_hash field is LE, so it must be explicitly
transformed on BE system for proper result.
Fixes: 370e812b3e ("exfat: add nls operations")
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
Signed-off-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
The stream.size field is updated to the value of create timestamp
of the file entry. Fix this to use correct stream entry pointer.
Fixes: 29bbb14bfc ("exfat: fix incorrect update of stream entry in __exfat_truncate()")
Signed-off-by: Hyeongseok Kim <hyeongseok@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
We found the wrong hint_stat initialization in exfat_find_dir_entry().
It should be initialized when cluster is EXFAT_EOF_CLUSTER.
Fixes: ca06197382 ("exfat: add directory operations")
Cc: stable@vger.kernel.org # v5.7
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
An overflow issue can occur while calculating sector in
exfat_cluster_to_sector(). It needs to cast clus's type to sector_t
before left shifting.
Fixes: 1acf1a564b ("exfat: add in-memory and on-disk structures and headers")
Cc: stable@vger.kernel.org # v5.7
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
generic_file_fsync() exfat used could not guarantee the consistency of
a file because it has flushed not dirty metadata but only dirty data pages
for a file.
Instead of that, use exfat_file_fsync() for files and directories so that
it guarantees to commit both the metadata and data pages for a file.
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
We need to commit dirty metadata and pages to disk
before remounting exfat as read-only.
This fixes a failure in xfstests generic/452
generic/452 does the following:
cp something <exfat>/
mount -o remount,ro <exfat>
the <exfat>/something is corrupted. because while
exfat is remounted as read-only, exfat doesn't
have a chance to commit metadata and
vfs invalidates page caches in a block device.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
If the second exfat_get_dentry() call fails then we need to release
"old_bh" before returning. There is a similar bug in exfat_move_file().
Fixes: 5f2aa07507 ("exfat: add inode operations")
Reported-by: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Some fsck tool complain that padding part of the FileName field
is not set to the value 0000h. So let's maintain filesystem cleaner,
as exfat's spec. recommendation.
Signed-off-by: Hyeongseok.Kim <Hyeongseok@gmail.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
This code calls brelse(bh) and then dereferences "bh" on the next line
resulting in a possible use after free. The brelse() should just be
moved down a line.
Fixes: b676fdbcf4c8 ("exfat: standardize checksum calculation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
There is check error in range condition that can never be entered
even with invalid input.
Replace incorrent checking code with already existing valid checker.
Signed-off-by: hyeongseok.kim <hyeongseok@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
At truncate, there is a problem of incorrect updating in the file entry
pointer instead of stream entry. This will cause the problem of
overwriting the time field of the file entry to new_size. Fix it to
update stream entry.
Fixes: 98d917047e ("exfat: add file operations")
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
kbuild test robot reported :
fs/exfat/nls.c:531:22: warning: Variable 'p_uniname->name_len'
is reassigned a value before the old one has been used.
The reassignment of p_uniname->name_len is not needed and remove it.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
To clarify that it is a 16-bit checksum, the parts related to the 16-bit
checksum are renamed and change type to u16.
Furthermore, replace checksum calculation in exfat_load_upcase_table()
with exfat_calc_checksum32().
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Add Boot-Regions verification specified in exFAT specification.
Note that the checksum type is strongly related to the raw structure,
so the'u32 'type is used to clarify the number of bits.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Separate the boot sector analysis to read_boot_sector().
And add a check for the fs_name field.
Furthermore, add a strict consistency check, because overlapping areas
can cause serious corruption.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Aggregate PBR related definitions and redefine as "boot_sector" to comply
with the exFAT specification.
And, rename variable names including 'pbr'.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Optimize directory access based on exfat_entry_set_cache.
- Hold bh instead of copied d-entry.
- Modify bh->data directly instead of the copied d-entry.
- Write back the retained bh instead of rescanning the d-entry-set.
And
- Remove unused cache related definitions.
Signed-off-by: Tetsuhiro Kohada <kohada.tetsuhiro@dc.mitsubishielectric.co.jp>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Replace time_ms with time_cs in the file directory entry structure
and related functions.
The unit of create_time_ms/modify_time_ms in File Directory Entry are not
'milli-second', but 'centi-second'.
The exfat specification uses the term '10ms', but instead use 'cs' as in
msdos_fs.h.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
There is no need to init 'sync' in exfat_set_vol_flags().
This also fixes the following coccicheck warning:
fs/exfat/super.c:104:6-10: WARNING: Assignment of 0/1 to bool variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
After applying previous two patches, these functions are not used anymore.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Function partial_name_hash() takes long type value into which can be stored
one Unicode code point. Therefore conversion from UTF-32 to UTF-16 is not
needed.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Remove the direct use of KERN_<LEVEL> in functions by creating
separate exfat_<level> macros.
Miscellanea:
o Remove several unnecessary terminating newlines in formats
o Realign arguments and fit to 80 columns where appropriate
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
If two Unicode code points represented in UTF-16 are different then also
their UTF-32 representation must be different. Therefore conversion from
UTF-32 to UTF-16 is not needed.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Implement the new readahead aop and convert all callers (block_dev,
exfat, ext2, fat, gfs2, hpfs, isofs, jfs, nilfs2, ocfs2, omfs, qnx6,
reiserfs & udf).
The callers are all trivial except for GFS2 & OCFS2.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> # ocfs2
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> # ocfs2
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-17-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As Ubuntu and Fedora release new version used kernel version equal to or
higher than v5.4, They started to support kernel exfat filesystem.
Linus reported a mount error with new version of exfat on Fedora:
exfat: Unknown parameter 'namecase'
This is because there is a difference in mount option between old
staging/exfat and new exfat. And utf8, debug, and codepage options as
well as namecase have been removed from new exfat.
This patch add the dummy mount options as deprecated option to be
backward compatible with old one.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
'es' is malloced from exfat_get_dentry_set() in exfat_find() and should
be freed before leaving from the error handling cases, otherwise it will
cause memory leak.
Fixes: 5f2aa07507 ("exfat: add inode operations")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Doing copy_file_range() on exfat with a file opened for direct IO leads
to an -EFAULT:
# xfs_io -f -d -c "truncate 32768" \
-c "copy_range -d 16384 -l 16384 -f 0" /mnt/test/junk
copy_range: Bad address
and the reason seems to be that we go through:
default_file_splice_write
splice_from_pipe
__splice_from_pipe
write_pipe_buf
__kernel_write
new_sync_write
generic_file_write_iter
generic_file_direct_write
exfat_direct_IO
do_blockdev_direct_IO
iov_iter_get_pages
and land in iterate_all_kinds(), which does "return -EFAULT" for our kvec
iter.
Setting exfat's splice_write to iter_file_splice_write fixes this and lets
fsx (which originally detected the problem) run to success from
the xfstests harness.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
The timestamp for access_time has double seconds granularity(There is no
10msIncrement field for access_time unlike create/modify_time).
exfat's atimes are restricted to only 2s granularity so after
we set an atime, round it down to the nearest 2s and set the
sub-second component of the timestamp to 0.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
The s_time_gran superblock field indicates the on-disk nanosecond
granularity of timestamps, and for exfat that seems to be 10ms, so
set s_time_gran to 10000000ns. Without this, in-memory timestamps
change when they get re-read from disk.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Unify access to boot sector via 'sbi->pbr_bh'.
This fixes vol_flags inconsistency at read failed in fs_set_vol_flags(),
and buffer_head leak in __exfat_fill_super().
Signed-off-by: Tetsuhiro Kohada <Kohada.Tetsuhiro@dc.MitsubishiElectric.co.jp>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
This adds the necessary MODULE_ALIAS_FS() to exfat so the module gets
automatically loaded when an exfat filesystem is mounted.
Signed-off-by: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Discard support was always unconditionally disabled. Now it is disabled
only in the case when blk_queue_discard() returns false.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Al Viro recently reworked the way file system parameters are handled
Update super.c to work with it in linux-next 20200203.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds the Kconfig and Makefile for exfat.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds the implementation of nls operations for exfat.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds the implementation of misc operations for exfat.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds the implementation of exfat cache.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds the implementation of bitmap operations for exfat.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds the implementation of fat entry operations for exfat.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds the implementation of file operations for exfat.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
