The result of __dev_get_by_index() is not checked for NULL and then gets
dereferenced immediately.
Also, __dev_get_by_index() must be called while holding either RTNL lock
or @dev_base_lock, which isn't satisfied by mlx5e_hairpin_get_mdev() or
its callers. This makes the underlying hlist_for_each_entry() loop not
safe, and can have adverse effects in itself.
Fix by using dev_get_by_index() and handling nullptr return value when
ifindex device is not found. Update mlx5e_hairpin_get_mdev() callers to
check for possible PTR_ERR() result.
Fixes: 77ab67b7f0 ("net/mlx5e: Basic setup of hairpin object")
Addresses-Coverity: ("Dereference null return value")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When fw_fatal reporter reports an error, the firmware in not responding.
Unload the device to ensure that the driver closes all its resources,
even if recovery is not due (user disabled auto-recovery or reporter is
in grace period). On successful recovery the device is loaded back up.
Fixes: b3bd076f75 ("net/mlx5: Report devlink health on FW fatal issues")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Set the correct pci-device pointer to the ptp-RQ. This allows access to
dma_mask and avoids allocation request with wrong pci-device.
Fixes: a099da8ffc ("net/mlx5e: Add RQ to PTP channel")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add PTP-RQ to the loop when setting rx-vlan-offload feature via ethtool.
On PTP-RQ's creation, set rx-vlan-offload into its parameters.
Fixes: a099da8ffc ("net/mlx5e: Add RQ to PTP channel")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
If a feature flag is only present in features, but not in hw_features,
the user can't reset it. Although hw_features may contain NETIF_F_HW_TC
by the point where the driver checks whether HTB offload is supported,
this flag is controlled by another condition that may not hold. Set it
explicitly to make sure the user can disable it.
Fixes: 214baf2287 ("net/mlx5e: Support HTB offload")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When HW aggregates packets for an LRO session, it writes the payload
of two consecutive packets of a flow contiguously, so that they usually
share a cacheline.
The first byte of a packet's payload is written immediately after
the last byte of the preceding packet.
In this flow, there are two consecutive write requests to the shared
cacheline:
1. Regular write for the earlier packet.
2. Read-modify-write for the following packet.
In case of relaxed-ordering on, these two writes might be re-ordered.
Using the end padding optimization (to avoid partial write for the last
cacheline of a packet) becomes problematic if the two writes occur
out-of-order, as the padding would overwrite payload that belongs to
the following packet, causing data corruption.
Avoid this by disabling the end padding optimization when both
LRO and relaxed-ordering are enabled.
Fixes: 17347d5430 ("net/mlx5e: Add support for PCI relaxed ordering")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This is the same check as LAG mode checks if to enable lag.
This will fix adding peer miss rules if lag is not supported
and even an incorrect rules in socket direct mode.
Also fix the incorrect comment on mlx5_get_next_phys_dev() as flow #1
doesn't exists.
Fixes: ac004b8321 ("net/mlx5e: E-Switch, Add peer miss rules")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Destination vport vhca id is valid flag is set only merged eswitch isn't supported.
Change destination vport vhca id value to be set also only when merged eswitch
is supported.
Fixes: e4ad91f23f ("net/mlx5e: Split offloaded eswitch TC rules for port mirroring")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Fix a bug when flow table is created in priority that already
has other flow tables as shown in the below diagram.
If the new flow table (FT-B) has the lowest level in the priority,
we need to connect the flow tables from the previous priority (p0)
to this new table. In addition when this flow table is destroyed
(FT-B), we need to connect the flow tables from the previous
priority (p0) to the next level flow table (FT-C) in the same
priority of the destroyed table (if exists).
---------
|root_ns|
---------
|
--------------------------------
| | |
---------- ---------- ---------
|p(prio)-x| | p-y | | p-n |
---------- ---------- ---------
| |
---------------- ------------------
|ns(e.g bypass)| |ns(e.g. kernel) |
---------------- ------------------
| | |
------- ------ ----
| p0 | | p1 | |p2|
------- ------ ----
| | \
-------- ------- ------
| FT-A | |FT-B | |FT-C|
-------- ------- ------
Fixes: f90edfd279 ("net/mlx5_core: Connect flow tables")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
If the blk_mq_sched_alloc_tags() -> blk_mq_alloc_rqs() call fails, then we
call blk_mq_sched_free_tags() -> blk_mq_free_rqs().
It is incorrect to do so, as any rqs would have already been freed in the
blk_mq_alloc_rqs() call.
Fix by calling blk_mq_free_rq_map() only directly.
Fixes: 6917ff0b5b ("blk-mq-sched: refactor scheduler initialization")
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/1627378373-148090-1-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If backlog handler is running during a tear down operation we may enqueue
data on the ingress msg queue while tear down is trying to free it.
sk_psock_backlog()
sk_psock_handle_skb()
skb_psock_skb_ingress()
sk_psock_skb_ingress_enqueue()
sk_psock_queue_msg(psock,msg)
spin_lock(ingress_lock)
sk_psock_zap_ingress()
_sk_psock_purge_ingerss_msg()
_sk_psock_purge_ingress_msg()
-- free ingress_msg list --
spin_unlock(ingress_lock)
spin_lock(ingress_lock)
list_add_tail(msg,ingress_msg) <- entry on list with no one
left to free it.
spin_unlock(ingress_lock)
To fix we only enqueue from backlog if the ENABLED bit is set. The tear
down logic clears the bit with ingress_lock set so we wont enqueue the
msg in the last step.
Fixes: 799aa7f98d ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210727160500.1713554-4-john.fastabend@gmail.com
Its possible if a socket is closed and the receive thread is under memory
pressure it may have cached a skb. We need to ensure these skbs are
free'd along with the normal ingress_skb queue.
Before 799aa7f98d ("skmsg: Avoid lock_sock() in sk_psock_backlog()") tear
down and backlog processing both had sock_lock for the common case of
socket close or unhash. So it was not possible to have both running in
parrallel so all we would need is the kfree in those kernels.
But, latest kernels include the commit 799aa7f98d5e and this requires a
bit more work. Without the ingress_lock guarding reading/writing the
state->skb case its possible the tear down could run before the state
update causing it to leak memory or worse when the backlog reads the state
it could potentially run interleaved with the tear down and we might end up
free'ing the state->skb from tear down side but already have the reference
from backlog side. To resolve such races we wrap accesses in ingress_lock
on both sides serializing tear down and backlog case. In both cases this
only happens after an EAGAIN error case so having an extra lock in place
is likely fine. The normal path will skip the locks.
Note, we check state->skb before grabbing lock. This works because
we can only enqueue with the mutex we hold already. Avoiding a race
on adding state->skb after the check. And if tear down path is running
that is also fine if the tear down path then removes state->skb we
will simply set skb=NULL and the subsequent goto is skipped. This
slight complication avoids locking in normal case.
With this fix we no longer see this warning splat from tcp side on
socket close when we hit the above case with redirect to ingress self.
[224913.935822] WARNING: CPU: 3 PID: 32100 at net/core/stream.c:208 sk_stream_kill_queues+0x212/0x220
[224913.935841] Modules linked in: fuse overlay bpf_preload x86_pkg_temp_thermal intel_uncore wmi_bmof squashfs sch_fq_codel efivarfs ip_tables x_tables uas xhci_pci ixgbe mdio xfrm_algo xhci_hcd wmi
[224913.935897] CPU: 3 PID: 32100 Comm: fgs-bench Tainted: G I 5.14.0-rc1alu+ #181
[224913.935908] Hardware name: Dell Inc. Precision 5820 Tower/002KVM, BIOS 1.9.2 01/24/2019
[224913.935914] RIP: 0010:sk_stream_kill_queues+0x212/0x220
[224913.935923] Code: 8b 83 20 02 00 00 85 c0 75 20 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 89 df e8 2b 11 fe ff eb c3 0f 0b e9 7c ff ff ff 0f 0b eb ce <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 90 0f 1f 44 00 00 41 57 41
[224913.935932] RSP: 0018:ffff88816271fd38 EFLAGS: 00010206
[224913.935941] RAX: 0000000000000ae8 RBX: ffff88815acd5240 RCX: dffffc0000000000
[224913.935948] RDX: 0000000000000003 RSI: 0000000000000ae8 RDI: ffff88815acd5460
[224913.935954] RBP: ffff88815acd5460 R08: ffffffff955c0ae8 R09: fffffbfff2e6f543
[224913.935961] R10: ffffffff9737aa17 R11: fffffbfff2e6f542 R12: ffff88815acd5390
[224913.935967] R13: ffff88815acd5480 R14: ffffffff98d0c080 R15: ffffffff96267500
[224913.935974] FS: 00007f86e6bd1700(0000) GS:ffff888451cc0000(0000) knlGS:0000000000000000
[224913.935981] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[224913.935988] CR2: 000000c0008eb000 CR3: 00000001020e0005 CR4: 00000000003706e0
[224913.935994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[224913.936000] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[224913.936007] Call Trace:
[224913.936016] inet_csk_destroy_sock+0xba/0x1f0
[224913.936033] __tcp_close+0x620/0x790
[224913.936047] tcp_close+0x20/0x80
[224913.936056] inet_release+0x8f/0xf0
[224913.936070] __sock_release+0x72/0x120
[224913.936083] sock_close+0x14/0x20
Fixes: a136678c0b ("bpf: sk_msg, zap ingress queue on psock down")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210727160500.1713554-3-john.fastabend@gmail.com
We don't want strparser to run and pass skbs into skmsg handlers when
the psock is null. We just sk_drop them in this case. When removing
a live socket from map it means extra drops that we do not need to
incur. Move the zap below strparser close to avoid this condition.
This way we stop the stream parser first stopping it from processing
packets and then delete the psock.
Fixes: a136678c0b ("bpf: sk_msg, zap ingress queue on psock down")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210727160500.1713554-2-john.fastabend@gmail.com
- Many more irdma fixups from bots/etc
- bnxt_re regression in their counters from a FW upgrade
- User triggerable memory leak in rxe
-----BEGIN PGP SIGNATURE-----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=g54k
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Nothing very exciting here, mainly just a bunch of irdma fixes. irdma
is a new driver this cycle so it to be expected.
- Many more irdma fixups from bots/etc
- bnxt_re regression in their counters from a FW upgrade
- User triggerable memory leak in rxe"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Change returned type of irdma_setup_virt_qp to void
RDMA/irdma: Change the returned type of irdma_set_hw_rsrc to void
RDMA/irdma: change the returned type of irdma_sc_repost_aeq_entries to void
RDMA/irdma: Check vsi pointer before using it
RDMA/rxe: Fix memory leak in error path code
RDMA/irdma: Change the returned type to void
RDMA/irdma: Make spdxcheck.py happy
RDMA/irdma: Fix unused variable total_size warning
RDMA/bnxt_re: Fix stats counters
Pull cgroup fix from Tejun Heo:
"Fix leak of filesystem context root which is triggered by LTP.
Not too likely to be a problem in non-testing environments"
* 'for-5.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup1: fix leaked context root causing sporadic NULL deref in LTP
The arguments to the KVM_CLEAR_DIRTY_LOG ioctl include a pointer,
therefore it needs a compat ioctl implementation. Otherwise,
32-bit userspace fails to invoke it on 64-bit kernels; for x86
it might work fine by chance if the padding is zero, but not
on big-endian architectures.
Reported-by: Thomas Sattler
Cc: stable@vger.kernel.org
Fixes: 2a31b9db15 ("kvm: introduce manual dirty log reprotect")
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SMT siblings share caches and other hardware, and busy halt polling
will degrade its sibling performance if its sibling is working
Sean Christopherson suggested as below:
"Rather than disallowing halt-polling entirely, on x86 it should be
sufficient to simply have the hardware thread yield to its sibling(s)
via PAUSE. It probably won't get back all performance, but I would
expect it to be close.
This compiles on all KVM architectures, and AFAICT the intended usage
of cpu_relax() is identical for all architectures."
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-Id: <20210727111247.55510-1-lirongqing@baidu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently when SVM is enabled in guest CPUID, AVIC is inhibited as soon
as the guest CPUID is set.
AVIC happens to be fully disabled on all vCPUs by the time any guest
entry starts (if after migration the entry can be nested).
The reason is that currently we disable avic right away on vCPU from which
the kvm_request_apicv_update was called and for this case, it happens to be
called on all vCPUs (by svm_vcpu_after_set_cpuid).
After we stop doing this, AVIC will end up being disabled only when
KVM_REQ_APICV_UPDATE is processed which is after we done switching to the
nested guest.
Fix this by just using vmcb01 in svm_refresh_apicv_exec_ctrl for avic
(which is a right thing to do anyway).
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210713142023.106183-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is possible that AVIC was requested to be disabled but
not yet disabled, e.g if the nested entry is done right
after svm_vcpu_after_set_cpuid.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210713142023.106183-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is possible for AVIC inhibit and AVIC active state to be mismatched.
Currently we disable AVIC right away on vCPU which started the AVIC inhibit
request thus this warning doesn't trigger but at least in theory,
if svm_set_vintr is called at the same time on multiple vCPUs,
the warning can happen.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210713142023.106183-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
commit bc9e9e672d ("KVM: debugfs: Reuse binary stats descriptors")
did replace the old definitions with the binary ones. While doing that
it missed that some files are names different than the counters. This
is especially important for kvm_stat which does have special handling
for counters named instruction_*.
Fixes: commit bc9e9e672d ("KVM: debugfs: Reuse binary stats descriptors")
CC: Jing Zhang <jingzhangos@google.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20210726150108.5603-1-borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now, svm_hv_vmcb_dirty_nested_enlightenments has an incorrect
dereference of vmcb->control.reserved_sw before the vmcb is checked
for being non-NULL. The compiler is usually sinking the dereference
after the check; instead of doing this ourselves in the source,
ensure that svm_hv_vmcb_dirty_nested_enlightenments is only called
with a non-NULL VMCB.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Vineeth Pillai <viremana@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[Untested for now due to issues with my AMD machine. - Paolo]
This test measures the performance effects of KVM's access tracking.
Access tracking is driven by the MMU notifiers test_young, clear_young,
and clear_flush_young. These notifiers do not have a direct userspace
API, however the clear_young notifier can be triggered by marking a
pages as idle in /sys/kernel/mm/page_idle/bitmap. This test leverages
that mechanism to enable access tracking on guest memory.
To measure performance this test runs a VM with a configurable number of
vCPUs that each touch every page in disjoint regions of memory.
Performance is measured in the time it takes all vCPUs to finish
touching their predefined region.
Example invocation:
$ ./access_tracking_perf_test -v 8
Testing guest mode: PA-bits:ANY, VA-bits:48, 4K pages
guest physical test memory offset: 0xffdfffff000
Populating memory : 1.337752570s
Writing to populated memory : 0.010177640s
Reading from populated memory : 0.009548239s
Mark memory idle : 23.973131748s
Writing to idle memory : 0.063584496s
Mark memory idle : 24.924652964s
Reading from idle memory : 0.062042814s
Breaking down the results:
* "Populating memory": The time it takes for all vCPUs to perform the
first write to every page in their region.
* "Writing to populated memory" / "Reading from populated memory": The
time it takes for all vCPUs to write and read to every page in their
region after it has been populated. This serves as a control for the
later results.
* "Mark memory idle": The time it takes for every vCPU to mark every
page in their region as idle through page_idle.
* "Writing to idle memory" / "Reading from idle memory": The time it
takes for all vCPUs to write and read to every page in their region
after it has been marked idle.
This test should be portable across architectures but it is only enabled
for x86_64 since that's all I have tested.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210713220957.3493520-7-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is a missing break statement which causes a fallthrough to the
next statement where optarg will be null and a segmentation fault will
be generated.
Fixes: 9e965bb75a ("KVM: selftests: Add backing src parameter to dirty_log_perf_test")
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210713220957.3493520-6-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_MAX_VCPU_ID is the maximum vcpu-id of a guest, and not the number
of vcpu-ids. Fix array indexed by vcpu-id to have KVM_MAX_VCPU_ID+1
elements.
Note that this is currently no real problem, as KVM_MAX_VCPU_ID is
an odd number, resulting in always enough padding being available at
the end of those arrays.
Nevertheless this should be fixed in order to avoid rare problems in
case someone is using an even number for KVM_MAX_VCPU_ID.
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-Id: <20210701154105.23215-2-jgross@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull workqueue fix from Tejun Heo:
"Fix a use-after-free in allocation failure handling path"
* 'for-5.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix UAF in pwq_unbound_release_workfn()
The ptp cycle is related to the hardware, so it may cause compatibility
issues if a fixed value is used in driver. Therefore, the method of
obtaining this value is changed to read from the register rather than
use a fixed value in driver.
Fixes: 0bf5eb7885 ("net: hns3: add support for PTP")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a safeguard, if we're going to queue async work, do it from task_work
from the original task. This ensures that we can always sanely create
threads, regards of what the reissue context may be.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add links to the issue tracker and the IRC channel for the amdgpu
driver.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Pan Xinhui <Xinhui.Pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We've gotten a number of reports about backlight control not
working on panels which indicate that they use aux backlight
control. A recent patch:
commit 2d73eabe29
Author: Camille Cho <Camille.Cho@amd.com>
Date: Thu Jul 8 18:28:37 2021 +0800
drm/amd/display: Only set default brightness for OLED
[Why]
We used to unconditionally set backlight path as AUX for panels capable
of backlight adjustment via DPCD in set default brightness.
[How]
This should be limited to OLED panel only since we control backlight via
PWM path for SDR mode in LCD HDR panel.
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Camille Cho <Camille.Cho@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Changes some other code to only use aux for backlight control on
OLED panels. The commit message seems to indicate that PWM should
be used for SDR mode on HDR panels. Do something similar for
backlight control in general. This may need to be revisited if and
when HDR started to get used.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1438
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213715
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We don't check DENTIST_DISPCLK_CHG_DONE to ensure dentist
display clockis updated to target value. In some scenarios with large
display clock margin, it will deliver unfinished display clock and cause
issues like display black screen.
[How]
Checking DENTIST_DISPCLK_CHG_DONE to ensure display clock
has been update to target value before driver do other clock related
actions.
Reviewed-by: Cyr Aric <aric.cyr@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
IP parameter min_meta_chunk_size_bytes is read for bandwidth
calculations but it was never defined.
[how]
Define min_meta_chunk_size_bytes and initialize value to 256.
Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DST_Y_PREFETCH can overflow when DestinationLinesForPrefetch values are
too large due to the former being limited to 8 bits.
[how]
Set the maximum value of DestinationLinesForPrefetch to be 255 * refclk
period.
Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
User might change the suspend behaviour from OS.
[How]
Check with pm for target suspend state and set s0ix
flag only for s2idle state.
v2: User might change default suspend state, use target state
v3: squash in build fix
Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
There is a scenario that dp cable is unplugged from DUT during system
suspended will cause audio option state does not match real connection
state. Fix this problem by Signaling audio plugged change with realtime
connection status at dp_pm_resume() so that audio option will be in
correct state after system resumed.
Changes in V2:
-- correct Fixes tag commit id.
Fixes: f591dbb5fb ("drm/msm/dp: power off DP phy at suspend")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1627059339-12142-1-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Some bootloaders set the widebus enable bit in the INTF_CONFIG register,
but configuration of widebus isn't yet supported ensure that the
register has a known value, with widebus disabled.
Fixes: c943b4948b ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210722024434.3313167-1-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
DP cable should always connect to DPU during the entire PHY compliance
testing run. Since DP PHY compliance test is executed at irq_hpd event
context, dp_ctrl_off_link_stream() should be used instead of dp_ctrl_off().
dp_ctrl_off() is used for unplug event which is triggered when DP cable is
dis connected.
Changes in V2:
-- add fixes statement
Fixes: f21c8a276c ("drm/msm/dp: handle irq_hpd with sink_count = 0 correctly")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1626191647-13901-2-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
It turns out that when the display is enabled by the bootloader, we can
get some transient iommu faults from the display. Which doesn't go over
too well when we install a fault handler that is gpu specific. To avoid
this, defer installing the fault handler until we get around to setting
up per-process pgtables (which is adreno_smmu specific). The arm-smmu
fallback error reporting is sufficient for reporting display related
faults (and in fact was all we had prior to f8f934c180)
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Yassine Oudjana <y.oudjana@protonmail.com>
Fixes: 2a574cc05d ("drm/msm: Improve the a6xx page fault handler")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210707180113.840741-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
The downstream dts lists this value as 0x494, and not
0x45c.
Fixes: af776a3e1c ("drm/msm/dpu: add SM8250 to hw catalog")
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210628085033.9905-1-robert.foss@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
In the function s3fwrn5_fw_download(), the 'ret' is not assigned,
so the correct value should be given in dev_err function.
Fixes: a0302ff590 ("nfc: s3fwrn5: remove unnecessary label")
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzbot reported skb_over_panic() in llc_pdu_init_as_xid_cmd(). The
problem was in wrong LCC header manipulations.
Syzbot's reproducer tries to send XID packet. llc_ui_sendmsg() is
doing following steps:
1. skb allocation with size = len + header size
len is passed from userpace and header size
is 3 since addr->sllc_xid is set.
2. skb_reserve() for header_len = 3
3. filling all other space with memcpy_from_msg()
Ok, at this moment we have fully loaded skb, only headers needs to be
filled.
Then code comes to llc_sap_action_send_xid_c(). This function pushes 3
bytes for LLC PDU header and initializes it. Then comes
llc_pdu_init_as_xid_cmd(). It initalizes next 3 bytes *AFTER* LLC PDU
header and call skb_push(skb, 3). This looks wrong for 2 reasons:
1. Bytes rigth after LLC header are user data, so this function
was overwriting payload.
2. skb_push(skb, 3) call can cause skb_over_panic() since
all free space was filled in llc_ui_sendmsg(). (This can
happen is user passed 686 len: 686 + 14 (eth header) + 3 (LLC
header) = 703. SKB_DATA_ALIGN(703) = 704)
So, in this patch I added 2 new private constansts: LLC_PDU_TYPE_U_XID
and LLC_PDU_LEN_U_XID. LLC_PDU_LEN_U_XID is used to correctly reserve
header size to handle LLC + XID case. LLC_PDU_TYPE_U_XID is used by
llc_pdu_header_init() function to push 6 bytes instead of 3. And finally
I removed skb_push() call from llc_pdu_init_as_xid_cmd().
This changes should not affect other parts of LLC, since after
all steps we just transmit buffer.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+5e5a981ad7cc54c4b2b4@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NIX_RX_SW_SYNC ensures all existing transactions are finished and
pkts are written to LLC/DRAM, queues should be teared down after
successful SW_SYNC. Due to a HW errata, in some rare scenarios
an existing transaction might end after SW_SYNC operation. To
ensure operation is fully done, do the SW_SYNC twice.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 6a82582d9f ("HID: ft260: add usb hid to i2c host bridge driver")
Fix warning reported by static analysis when built with W=1 for arm64 by
clang version 13.0.0
>> drivers/hid/hid-ft260.c:794:44: warning: format specifies type 'short' but
the argument has type 'int' [-Wformat]
return scnprintf(buf, PAGE_SIZE, "%hi\n", le16_to_cpu(*field));
~~~ ^~~~~~~~~~~~~~~~~~~
%i
include/linux/byteorder/generic.h:91:21: note: expanded from
macro 'le16_to_cpu'
#define le16_to_cpu __le16_to_cpu
^
include/uapi/linux/byteorder/big_endian.h:36:26: note: expanded from
macro '__le16_to_cpu'
#define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/uapi/linux/swab.h:105:2: note: expanded from macro '__swab16'
(__builtin_constant_p((__u16)(x)) ? \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Any sprintf style use of %h or %hi for a sub-int sized value isn't useful
since integer promotion is done on the value anyway. So, use %d instead.
https://lore.kernel.org/lkml/CAHk-=wgoxnmsj8GEVFJSvTwdnWm8wVJthefNk2n6+4TC=20e0Q@mail.gmail.com/
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Suggested-by: Joe Perches <joe@perches.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Now that we return when bnxt_open() fails in bnxt_fw_reset_task(),
there is no need to check for 'rc' value again before invoking
bnxt_reenable_sriov().
Fixes: 3958b1da72 ("bnxt_en: fix error path of FW reset")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case when psp_init_asd_microcode() fails to load ASD microcode file,
psp_v12_0_init_microcode() tries to print the firmware filename that
failed to load before bailing out.
This is wrong because:
- the firmware filename it would want it print is an incorrect one as
psp_init_asd_microcode() and psp_v12_0_init_microcode() are loading
different filenames
- it tries to print fw_name, but that's not yet been initialized by that
time, so it prints random stack contents, e.g.
amdgpu 0000:04:00.0: Direct firmware load for amdgpu/renoir_asd.bin failed with error -2
amdgpu 0000:04:00.0: amdgpu: fail to initialize asd microcode
amdgpu 0000:04:00.0: amdgpu: psp v12.0: Failed to load firmware "\xfeTO\x8e\xff\xff"
Fix that by bailing out immediately, instead of priting the bogus error
message.
Reported-by: Vojtech Pavlik <vojtech@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
