Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
A continuation of cleanup work of Intel SST solutions found in
sound/soc/intel/. With two major chapters released last year catpt [1]
and removal of haswell solution [2], time has come for Skylake-driver.
Througout 2019, 2020 and 2021 Skylake-driver has had many fixes applied
and even attempts of refactors as seen in fundamental overhaul [3], IPC
flow adjustments [4] and LARGE_CONFIG overhaul [5] series.
Unfortunately, story repeats itself - problems are found within the core
of a driver. Painting it with different colors does not change the fact
that is it still a house of cards. As changes needed to address those
issues would make Skylake solution incompatible with its previous
revisions, a decision has been made to provide a new solution instead.
In time it would deprecate and replace Skylake-driver.
That solution has been called AVS - from AudioDSP architecture name:
Audio-Voice-Speech. It is meant to provide support for the exact same
range of platforms as its predecessor: SKL, KBL, AML and APL.
Note: this series is dependent upon HDA-series [6] which exposes several
codec-organization functions allowing for reduced code size on
avs-driver side.
Note: this series does not add fully functional driver as its size would
get out of control. Here, focus is put on adding IPC protocol and code
loading code.
Compared to SKL and KBL, more recent cAVS platforms are meant to re-use
one of HDAudio streams during boot procedure causing CLDMA to become
obsolete. Once transferred, given stream is returned to pool available
for audio streaming.
Module loading handler is stub as library and module code became
inseparable in later firmware generations.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-18-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With CLDMA transfer implemented, make use of it to shape firmware,
library and module loading routines for SKL and KBL platforms.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-17-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SKL and KBL rely on a dedicated HDAudio DMA stream for code loading and
authentication. The implementation of this specific mechanism for
SKL-based platforms re-uses HDAudio DMA (streaming) functions found in
HDA library to avoid duplication of functionality.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-16-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Code loading is a complex procedure and requires combined effort of DMA
and IPCs. With IPCs already in place, lay out ground for specific DMA
transfer operations.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-15-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Wrap elementary DSP-core operations and resource control into more
complex handlers. This is done to reduce the number of invocations of
wrapped operations throughout the driver as order of operations matters -
most flows involve register manipulation and IPCs combined.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Declare structures and constants for all modules being part of basefw
binary. These are used in streaming operations to communicate the needs
of software to firmware side.
While adding module types, append handler for SET_SINK_FORMAT runtime
for COPIER module which allows for configuration of output pin other
than the default one (0).
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With basefw runtime parameter handlers added, implement utility
functions to ease pipelines and modules allocation. IDA is enlisted to
help with that.
As firmware is modular and multiple binaries can be loaded on-demand
depending on the streaming scenario, custom firmware caching mechanism
is added.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each module may expose a range of runtime parameters. For basefw,
implement handlers for: FIRMWARE_CONFIG, HARDWARE_CONFIG and
MODULES_INFO. These are used by driver to dynamically allocate resources
in respect to platform details, reducing number of hardcodes and code
duplications that would otherwise be needed to be defined within the
driver code.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ROM requests are messages initiated by Host to alter firmware early boot
process. They specify whether the next boot should be a fresh start or if
IMR can be used to speed things up.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio DSP supports low power states i.e.: transitions between D0 and D3
and D0-substates in form of D0i0 and D0i3. That process is a combination
of core and IPC operations. Here, Dx and D0ix IPC handlers are added.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware modules implement processing algorithms. Their lifecycle,
similarly to pipelines is being controlled by IPCs: initialization,
deletion and (un)binding.
Modules can be configured at runtime - runtime parameters. This is done
with help of LARGE_CONFIG IPCs: getter and setter.
Due to firmware limitations, LARGE_CONFIG_GET handler implementation
does not support retrieving payload with size larger than IPC inbox
window size.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pipeline represents a scheduling entity. Their existence as well as
their state machine is controlled through CREATE_PIPELINE,
DELETE_PIPELINE and SET_PIPELINE_STATE IPCs.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Before firmware and its modules can be used, they have to be loaded.
Code loading process is complex and is a combination of DMA and IPC
operations. Here, IPC part is being added and accounts for CLDMA and HDA
mechanisms both.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement the IPC between Intel audio firmware and kernel driver. The
IPC allows transmission of requests, handling of responses as well as
unsolicited (i.e. firmware-generated) notifications.
A subscription mechanism is added to enable different parts of the
driver to register for specific notifications.
The part of the DSP boot process that involves sending ROM message
requires an extra step - must be followed by unstall operation of
MAIN_CORE. All other types of messages do not require such specific
handling, so separate set of functions is provided for sending these.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Declare base structures and core DSP operations for the avs solution.
The base structures describe PCI HDAudio bus device and platform-type
differentiations. First set of operations added controls the lifecycle
of any Audio DSP core: (un)powering, (un)resetting and (un)stalling.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To allow for more flexibility i.e. populating component DAIs dynamically
during its initialization, without being limited to topology loading
procedure, expose snd_soc_register(), snd_soc_dapm_new_dai_widgets() and
snd_soc_dapm_free_widget() functions.
Allows users to first check available resources e.g. number of PCMs
supported by HDAudio codec before allocating the number of DAPM
widgets needed. This prevents superfluous objects from being created or
allows driver to adjust to situation when resources are limited.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On a HP 288 Pro G8, the front mic could not be detected.In order to
get it working, the pin configuration needs to be set correctly, and
the ALC671_FIXUP_HP_HEADSET_MIC2 fixup needs to be applied.
Signed-off-by: huangwenhui <huangwenhuia@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220311093836.20754-1-huangwenhuia@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix the missing clk_disable_unprepare() before return
from msm8916_wcd_digital_probe in the error handling case.
Fixes: 150db8c5af ("ASoC: codecs: Add msm8916-wcd digital codec")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307084523.28687-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Playback or capture errors are seen when clock is reset during an active
stage of DAI. Presently this scenario happens when DAI has both playback
and capture sessions running and one of these finishes first which will
be followed by clock rate reset. The remaining active session will be
affected in such case.
Address this problem by allowing clock rate reset to happen only when
the DAI is no more active.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1646910999-2501-1-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio hardware is possibly used in the firmware stage, so resetting audio
hardware before regcache records default register values is required.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308072435.22460-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All users have been converted to use the IPC agnostic
set_stream_data_offsett()
Remove all code related to the old API.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-11-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch from the IPC dependent ipc_pcm_params() ops to the IPC neutral
set_stream_data_offset().
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-10-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch from the IPC dependent ipc_pcm_params() ops to the IPC neutral
set_stream_data_offset().
Remove the no longer used hda_ipc_pcm_params() function as well.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add implementation for the generic set_stream_data_offset() callback to be
used by HDA platforms.
Convert the hda_ipc_pcm_params() to a wrapper for the new function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add implementation for the generic set_stream_data_offset() callback in
core to be used by platforms.
Convert the sof_ipc_pcm_params() to a wrapper for the new function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AMD is only implementing an empty function to pass the required test and
it is going to be deprecated in favor of the IPC agnostic
set_stream_data_offset() callback.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each running audio stream's data have distinct start offset within the
stream mailbox area from/to where the host can read/write.
Instead of using the struct sof_ipc_pcm_params_reply to configure this
offset, add an optional callback which is IPC agnostic.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Call directly for snd_sof_ipc_pcm_params() from sof_pcm_hw_params() and
remove the wrapper for it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not send IPC structure directly via pcm_hw_params to make it IPC
agnostic.
A new struct is created to retrieve the needed platform parameters and if
there is a need it can be extended with new options.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The implementation for snd_sof_ipc_stream_pcm_params() does not exist,
remove it from the header file.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RT711 sdca sdw is added with SDW0 link for ADL-PS platform.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Muralidhar Reddy <muralidhar.reddy@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220310171651.249385-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Taniks has four max98357a on SSP2 with Demux and EQ in topology to
implement a 2-way speaker system.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220310171651.249385-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Buffers allocated with snd_dma_alloc_pages() will have DMA direction
DMA_BIDIRECTIONAL. The trace data memory is only used for one DMA
direction: DMA_FROM_DEVICE, DMA only writes there, never reads.
We also need to do a sync before accessing (reading with CPU) from the
trace data buffer to copy it to user space.
Note: snd_dma_buffer_sync() is also used for normal playback and capture
streams to make sure that the data is available for the DMA or CPU.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220310171651.249385-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
"cstream" is dereferenced but null checked later. Swap their
positions to avoid potential null dereference.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Weiguo Li <liwg06@foxmail.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220310171651.249385-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add back logic to mark all playback streams as L1 compatible.
Fixes: 246dd4287d ("ASoC: SOF: Intel: make DMI L1 selection more robust")
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220310171651.249385-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If kernel is built with hung task detection enabled and
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT set to less than 60 seconds,
snd_hdac_i915_init() will trigger the hung task timeout in case i915 is
not available and taint the kernel.
Use wait_for_completion_killable_timeout() for the wait to
avoid this problem.
Co-developed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://lore.kernel.org/r/20220309182439.1053856-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rather more fixes here than I'm comfortable with, we've had several
vendors noticing issues late in the release cycle all of which are valid
and reasonable fixes but it adds up to a much larger change set than I'd
like. Several of the AMD fixes look like cleanups from the subject
lines but are actually fixing user visible problems as well.
If you were to merge this for 5.18 rather than 5.17 it wouldn't be the
end of the world, stable will probably backport everything anyway.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmIp6mAACgkQJNaLcl1U
h9C9uAf/ZoIHlCa7mWD7VixBSl1DEsoV52KXUgzbzZBdZCTml45HxpsjVFCU3rZm
V7Cqsy3+Vbdz+U0KFnSm2KM0YfYAKsJaKXdvP2TKAEyLqJkCQxgYaN5SnlWFWjEy
H6yEzdOdRRn0tFR/DUbwxU2fALrXhAizK3FgX7jJraxE0dOcYXeKAe7nyjMq8cU3
K4ySo7dXyyamRSUrqkQLXBPXFktLjVZuhCfP1NaMJFr+sozj9EdN3VIgRZaJ1oet
qizjiibam+AxBlQMe8xLeteFPw2iy9qTQvzV2vLF7URMyQyHcS+oq8//AHtCbyG5
JD9C2NimWkKqyRuPh2gq1o37tuIIFg==
=o3xQ
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.17-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Potential fixes for v5.17
Rather more fixes here than I'm comfortable with, we've had several
vendors noticing issues late in the release cycle all of which are valid
and reasonable fixes but it adds up to a much larger change set than I'd
like. Several of the AMD fixes look like cleanups from the subject
lines but are actually fixing user visible problems as well.
If you were to merge this for 5.18 rather than 5.17 it wouldn't be the
end of the world, stable will probably backport everything anyway.
There is a spelling mistake in a dev_info message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220309164116.178685-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 7e7292dba2 ("ASoC: fsl: add imx-es8328 machine driver")
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Link: https://lore.kernel.org/r/20220310091902.129299-1-wangwensheng4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The print function dev_err() is redundant because
platform_get_irq() already prints an error.
Eliminate the follow coccicheck warning:
./sound/soc/atmel/mchp-pdmc.c:991:2-9: line 991 is redundant because
platform_get_irq() already prints an error.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220310082756.1183-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TX clock source may be changed in next case, need to
disable it when stop, otherwise the TX may not work after
changing the clock source, error log is:
aplay: pcm_write:2058: write error: Input/output error
Fixes: a2388a498a ("ASoC: fsl: Add S/PDIF CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/1646879863-27711-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
In preparation for adding support for the new IPC version that has been
introduced in the SOF firmware, this patch set includes some clean ups
and necessary modifications to commonly used functions that will be
re-used across different IPC-specific code.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset adds a number of improvements for ES8336-based Intel
platforms, which are not well supported at all in Linux. Since
Christmas 2021, we've seen dozens of reports of broken audio [1].
The fundamental problem is that those platforms were built for Windows
but using an I2S codec - instead of the HDaudio traditional
solution. As a result, we are missing all the usual information needed
to configure the audio card (which I2S, what configuration, DMICs or
not, etc). The situation is similar to Baytrail with all possible
permutations enabled.
Some of the information can be discovered by checking the contents of
the 'NHLT' ACPI table. This helps discover at run-time which SSP to
use, and the number of microphones present. This NHLT-based solution
helps remove quirks that were added earlier.
Unfortunately, there are still a number of platform properties that
are not described by ACPI, just as GPIOs used for speakers, jack
detection inversion, etc. For some case, quirks are still provided in
the machine drivers.
Additional work will likely be needed, e.g. to detect which MCLK needs
to be used, refine the UCM settings, add the ES8326 codec driver, but
this is a first-step towards an 'out of the box' experience on Intel
platforms.
This patchset touches the sound/hda/intel-nhlt parts but should IMHO
be merged in the ASoC tree.
I would like to acknowledge the help of Nikolai Kostrigin, Mauro
Carvalho Chehab, Huajun Li, David Yang (@yangxiaohua2009) and other
GitHub testers.
[1] https://github.com/thesofproject/linux/issues?q=is%3Aissue+is%3Aopen+label%3A%22codec+ES8336%22
select would force the symbol to value without checking the dependencies.
In this case selecting TX and RX MACROs directly without checking its
dependency on COMMON_CLK would break builds on platform which do no
set COMMON_CLK.
ex:
WARNING: unmet direct dependencies detected for SND_SOC_LPASS_RX_MACRO
Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMMON_CLK [=n]
Selected by [m]:
- SND_SOC_SC7280 [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] &&
SND_SOC_QCOM [=m] && I2C [=y] && SOUNDWIRE [=m]
move select to imply which should enforce symbol to be set to 'n' if any
dependencies are not resolved.
Fixes: 57350bd41c ("ASoC: qcom: SC7280: Add machine driver")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220309140552.8065-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rx_buffer is cleared before sending an IPC to make sure that when the
/sys/kernel/debug/sof/ipc_msg_inject file is read we will have correct
information in the buffer (no random or stale data).
But if the user reads the file before sending any message the buffer might
contain garbage which should not be interpreted.
To prevent this, clear the rx_buffer on allocation.
Fixes: cac0b0887e ("ASoC: SOF: Convert the generic IPC message injector into SOF client")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220309110104.18370-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use txclk array to keep all TxClk sources instead of keeping
clocks per rate - need to do this in order to avoid multiple
prepare_enable/disable_unprepare of the same clock during
suspend/resume.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1646817523-26800-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
on x86_64:
ERROR: modpost: "sof_dai_get_bclk"
[sound/soc/intel/boards/snd-soc-intel-sof-cirrus-common.ko] undefined!
ERROR: modpost: "sof_dai_get_mclk"
[sound/soc/intel/boards/snd-soc-intel-sof-realtek-common.ko]
undefined!
This comes from a missing dependency on at least ONE SOF platform
being selected. This dependency exists for all other machine drivers,
this was missed in the earlier reviews.
Fixes: 2fe14ff61b ("ASoC: Intel: sof_ssp_amp: rename driver and support cs35l41 amplifier")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220308202318.401358-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For sound need to be continuously output at suspend with rpmsg
sound card, so need to keep the clock always on at suspend,
then suspend & resume callback is not needed.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1646822293-26965-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Additional code was added and the comment on the speaker GPIO needs to
be moved before we actually try to get the GPIO.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220308192610.392950-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The presence of DMICs needs to be signaled to UCM, follow the HDaudio
example and use the 'cfg-dmics' component string to report the number
of dmics present on the platform.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220308192610.392950-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ES8326 requires a different codec driver than ES8316/8336, fixup
the codec name and dai name depending on the ACPI _HID exposed in the
DSDT.
Also add the select in Kconfig
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220308192610.392950-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The codec driver exposes a set of properties that can be set from the
machine driver - as done in bytcht_es8316.c
Start by adding the JD_INVERTED quirk.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220308192610.392950-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Additional code was added and the comment on the speaker GPIO needs to
be moved before we actually try to get the GPIO.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220308192610.392950-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We only logged the SSP quirk, make sure the GPIO and DMIC quirks are
exposed.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220308192610.392950-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since we see a proliferation of devices with various configurations,
we want to automatically set the DMIC and SSP information. This patch
relies on the information extracted from NHLT and partially reverts
existing DMI quirks added by commit a164137ce9 ("ASoC: Intel: add
machine driver for SOF+ES8336")
Note that NHLT can report multiple SSPs, choosing from the
ssp_link_mask in an MSB-first manner was found experimentally to work
fine.
The only thing that cannot be detected is the GPIO type, and users may
want to use the quirk override parameter if the 'wrong' solution is
provided.
Tested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220308192610.392950-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit ce6a70bfce.
The next patch will add run-time detection of the required SSP and
this hard-coded quirk is not needed.
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220308192610.392950-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have an existing 'adev' handle from which we can find the codec
device, no need for an I2C bus search.
This change aligns this driver will all other I2S-based machine
drivers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220308192610.392950-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not fail if the GPIO used for speakers is not present, at least the
headphone, headset and internal mics should work.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220308192610.392950-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the support for all ES83x6 devices
Signed-off-by: Nikolai Kostrigin <nickel@altlinux.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220308192610.392950-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We're missing this check for the CNL PCI id
Reported-by: Nikolai Kostrigin <nickel@altlinux.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220308192610.392950-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We only saw ESSX8336 so far, but now with reports of 'ESSX8326' we
need to expand to a full list. Let's reuse the 'snd_soc_acpi_codecs'
structure to store the information.
Note that ES8326 will need a dedicated codec driver, but the plan is
to use the same machine driver for all Everest Audio devices.
Reported-by: anthony tonitch <d.tonitch@gmail.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220308192610.392950-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We only saw ESSX8336 so far, but now with reports of 'ESSX8326' we
need to expand to a full list. Let's reuse the 'snd_soc_acpi_codecs'
structure to store the information.
Reported-by: anthony tonitch <d.tonitch@gmail.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220308192610.392950-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Different topology filenames may be required depending on which SSP is
used, and whether or not digital mics are present.
This patch adds a tplg_quirk_mask and in the case of the SOF driver
adds the relevant configurations.
This is a short-term solution to the ES8336 support issues.
In a long-term solution, we would need an interface where the machine
driver or platform driver have the ability to alter the topology
hard-coded low-level hardware support, e.g. by substituting an
interface for another, or disabling an interface that is not supported
on a given skew.
BugLink: https://github.com/thesofproject/linux/issues/3248
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220308192610.392950-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For devices designed for Windows, the SSP information should be listed
in the NHLT, and when present can be used to set quirks automatically
in the machine driver.
The NHLT information exposes BT and analog audio connections
separately, for now we are only interested in the analog audio parts.
The use of dev_info() for the SSP mask is intentional so that we can
immediately flag devices with an ES8336 codec. Since NHLT is not used
for recent Chromebooks these messages should be rare.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220308192610.392950-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The NHLT information can be used to figure out which SSPs are enabled
in a platform.
The 'SSP' link type is too broad for machine drivers, since it can
cover the Bluetooth sideband and the analog audio codec connections,
so this helper exposes a parameter to filter with the device
type (DEVICE_I2S refers to analog audio codec in NHLT parlance).
The helper returns a mask, since more than one SSP may be used for
analog audio, e.g. the NHLT spec describes the use of SSP0 for
amplifiers and SSP1 for headset codec. Note that if more than one bit
is set, it's impossible to determine which SSP is connected to what
external component. Additional platform-specific information based on
e.g. DMI quirks would still be required in the machine driver to
configure the relevant dailinks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220308192610.392950-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We currently extract the DMIC number only for HDaudio or SoundWire
platforms. For I2S/TDM platforms, this wasn't necessary until now, but
with devices with ES8336 we need to find a solution to detect dmics
more reliably than with a DMI quirk.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220308192610.392950-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move definition of struct snd_sof_ipc to the header file so it can be
shared with new IPC versions.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220308164344.577647-19-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the comp_dai and dai_config members of struct snd_sof_dai and
replace it with a void *private field. Introduce a new struct
sof_dai_private_data that will contain the pointer to these two fields.
The topology parser will populate this structure and save it as part of
the "private" member in snd_sof_dai. Change all users of these fields to
use the private member instead.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220308164344.577647-18-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the count and priv_size arguments in sof_parse_tokens() and add
comments to clarify the arguments.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220308164344.577647-17-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the priv_size arg to array_size and clarify the arguments in the
comments.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220308164344.577647-16-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify the signature for sof_parse_uuid_tokens(),
sof_parse_word_tokens() and sof_parse_string_tokens() to reorder the
arguments to be more intuitive and rename the count arg to num_tokens.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220308164344.577647-15-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add 2 new fields to snd_sof_widget to store an array of tuples
defined by struct snd_sof_tuple and the number of tuples. When the
topology gets parsed, the tuples associated with a widget will be stored
in this array and will be used to construct the IPC structure
depending on the IPC version.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220308164344.577647-14-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IPC structure can be set up using the fields in struct snd_sof_route
when the pipeline connections are established.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220308164344.577647-13-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parse the UUID token and save it in the new uuid field in struct
snd_sof_widget. struct sof_ipc_comp_ext is no longer needed. So remove
it too.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220308164344.577647-12-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
In preparation for adding support for the new IPC version that has been
introduced in the SOF firmware, this patch set includes some clean ups
and necessary modifications to commonly used functions that will be
re-used across different IPC-specific code.
Merge series from Codrin Ciubotariu <codrin.ciubotariu@microchip.com>:
This patch series adds support for Pulse Density Microphone Controller
(PDMC), present on Microchip's SAMA7G5.
The PDMC interfaces up to 4 digital microphones having Pulse Density
Modulated (PDM) outputs. It generates a single clock line and samples 1 or
2 data lines. The signal path includes an audio grade programmable
decimation filter and outputs 24-bit audio words.
The source of each channel can be independently defined as PDMC_DS0 or
PDMC_DS1, sampled at the rising or falling edge of PDMC_CLK.
The patch series starts with a fix on the ASoC DMA engine support. Then
continues with the bindings and the driver of PDMC. It is followed by the
DT nodes for SAMA7G5 and SAMA7G5-EK. In the end, the drivers for PDMC
and PDM microphones are enabled in sama7_defconfig.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error paths.
For example, when codec_np is NULL, saif_np[0] and saif_np[1]
are not NULL, it will cause leaks.
of_node_put() will check if the node pointer is NULL, so we can
call it directly to release the refcount of regular pointers.
Fixes: e968194b45 ("ASoC: mxs: add device tree support for mxs-sgtl5000")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220308020146.26496-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Pulse Density Microphone Controller (PDMC) interfaces up to 4 digital
microphones having Pulse Density Modulated (PDM) outputs. It generates a
single clock line and samples 1 or 2 data lines. The signal path includes
an audio grade programmable decimation filter and outputs 24-bit audio
words on the APB bus.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220307122202.2251639-4-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Even if struct snd_dmaengine_pcm_config is used, prepare_slave_config()
callback might not be set. Check if this callback is set before using it.
Fixes: fa654e0853 ("ASoC: dmaengine-pcm: Provide default config")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220307122202.2251639-2-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the missing clk_disable_unprepare() before return
from rk817_platform_probe() in the error handling case.
Fixes: 0d6a04da9b ("ASoC: Add Rockchip rk817 audio CODEC support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20220307090146.4104-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error paths.
Fix this by calling of_node_put() in error handling too.
Fixes: 4e28491a7a ("ASoC: mediatek: mt8192-mt6359: fix device_node leak")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220308015224.23585-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: afb93d7165 ("ASoC: SOF: imx: Add i.MX8M HW support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220308023325.31702-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the missing clk_disable_unprepare() before return
from rockchip_i2s_probe() in the error handling case.
Fixes: 01605ad128 ("ASoC: rockchip-i2s: enable "hclk" for rockchip I2S controller")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307083553.26009-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In acp3x_audio_probe() platform_get_irq() may return error, but i2s_irq now
is unsigned int so the error handling is never triggered.
Fixes: 87d71a1287 ("ASoC: amd: pcm-dma: Use platform_get_irq() to get the interrupt")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20220305123613.6324-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In acp5x_audio_probe() platform_get_irq() may return error, but i2s_irq now
is unsigned int so the error handling is never triggered.
Fixes: 87d71a1287 ("ASoC: amd: pcm-dma: Use platform_get_irq() to get the interrupt")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20220305123705.3708-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Lianjie Zhang <zhanglianjie@uniontech.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220307151939.32870-1-zhanglianjie@uniontech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error paths.
Fix this by calling of_node_put() in error handling too.
Fixes: a45f8853a5 ("ASoC: Add driver for PROTO Audio CODEC (with a WM8731)")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220308013949.20323-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This will avoid having to add the extended data for DAI components during
sof_widget_setup() as an extra step.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220307181111.49392-11-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These will be used later on by IPC-specific code.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220307181111.49392-10-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify the get_token op for string type tokens to pass the string as the
argument instead of a pointer to struct snd_soc_tplg_vendor_string_elem.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220307181111.49392-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is always 0 and never used while parsing.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220307181111.49392-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Looks like a copy-paste error. The CPU DAI is never used.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220307181111.49392-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the change in the commit:
"ASoC: SOF: Intel: hda: assign link DMA channel at run-time",
there is no need to find the CPU DAI in sof_link_hda_load().
Fixes: bdf4ad3fd0 ('ASoC: SOF: Intel: hda: assign link DMA channel at
run-time')
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220307181111.49392-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/sof/sof-audio.c:884:0: style: The function
'snd_sof_find_spcm_pcm_id' is never used. [unusedFunction]
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220307181111.49392-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the swidget's core for scheduler type widgets to match that of the
pipeline core. This simplifies the flow for core get/put during widget
setup/free.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220307181111.49392-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit "ASoC: SOF: core: Unregister machine driver before IPC and
debugfs" moved the call to unregister the machine driver to be done
before freeing the IPC. With this change, we can safely move the call to
snd_sof_remove() inside the same if() block just above.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220307181111.49392-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is not used.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220307181111.49392-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Focusrite Scarlett Gen 2/3 interfaces with internal mixers have a
"standalone" mode. When the interface is not connected to a USB host
and standalone mode is enabled, the interface will pass audio as
previously configured. This patch adds an ALSA control to allow
enabling/disabling that mode.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/cd88871c5e77abd5c23a4758a1f2ec9fd427fd69.1646578164.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
scarlett2_config_items[] contains the parameters for the configuration
items. The driver previously had two sets of configurations items; one
for devices with no mixer, and one for devices with a mixer. This
patch splits the latter into two (one set for Gen 2 devices and one
set for Gen 3 devices) in preparation for a new item (standalone)
which is present in both but with a different offset.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20969f9ea500684e978c87067fbdc7e73de1f6ed.1646578164.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Sascha Hauer <s.hauer@pengutronix.de>:
This series has some updates for the fsl_sai driver: Some general
cleanup patches, a bugfix in the ip revision checking and finally
the mclk setting is made more accurate and support for 1:1 bclk:mclk
setting is added.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Updates to clean-up the GPIOLIB dependency and a quirk for HP
SoundWire devices.
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This adds support for I2S/TDM links where the slot width varies
depending on the sample width, in a way that cannot be guessed by
component hw_params().
A typical example is:
- 16-bit samples use 16-bit slots
- 24-bit samples use 32-bit slots
There is no way for a component hw_params() to deduce from the information
it is passed that 24-bit samples will be in 32-bit slots.
Some audio hardware cannot support a fixed slot width or a slot width
equal to the sample width in all cases. This is usually due either to
limitations of the audio serial port or system clocking restrictions.
Merge series from Stephan Gerhold <stephan@gerhold.net>:
This series adds a simple driver and DT schema for the Awinic AW8738
audio amplifier. It's fairly simple - the main difference to
simple-amplifier is that there is a "one-wire pulse control" that
allows configuring the amplifier to one of a few pre-defined modes.
This can be used to configure the speaker-guard function (primarily
the power limit for the amplifier).
The "adata->i2s_irq" variable is unsigned so the error handling
will not work.
Fixes: 87d71a1287 ("ASoC: amd: pcm-dma: Use platform_get_irq() to get the interrupt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220304131256.GA28739@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
DETECT_MODE and PLL_START must be zero while HP_PDN and ADC_PDN are
both 1. If this condition is broken it can discharge FILT+ and it
can then take up to 1 second for FILT+ to recharge.
There is no workaround required for this, simply avoiding settings
and sequences that would break the requirement. The driver already
meets the requirement.
But it is not obvious from reading the code that this requirement
exists, or what is ensuring it is met. So it would not currently be
obvious to someone changing the code that there is certain special
behaviour that must be maintained.
To avoid accidental breakage in the future:
- Add comments into the register definitions to warn about this so
that anyone changing the code around DETECT_MODE and PLL_START is
aware of this requirement.
- Add a comment where PLL_START is written to 1 to highlight the
requirement and why it is satisfied.
- Add a comment in cs42l42_setup_hs_type_detect() when DETECT_MODE is
initialized.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220304144015.398656-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The parts supported by this driver can have product-specific
firmware and tunings files. Typically these have been used on
embedded systems where the manufacturer is responsible for
installing the correct product-specific firmware files into
/lib/firmware. However, the linux-firmware repository places all
available firmwares into /lib/firmware and it is up to the driver to
select the correct product-specific firmware from that directory.
For example a product containing four smart amplifiers may provide
firmware specific for that product and each of the amplifiers may
have coefficient files containing tunings for their placement in the
mechanical design.
This change extends firmware (wmfw) and coefficient (bin) filenames
to be of the general form:
<cirrus/>part-dspN-fwtype<-system_name<-asoc_component_prefix>>.type
Where the cirrus subdirectory, system_name and asoc_component_prefix
are optional.
New files will be placed in the cirrus subdirectory to avoid
polluting the main /lib/firmware/ location. The generic name must be
searched in /lib/firmware before /lib/firmware/cirrus so that a
generic file in the new location does not override existing
product-specific files in the legacy location.
The search order for firmware files is:
- cirrus/part-dspN-fwtype-system_name-asoc_component_prefix.wmfw
- cirrus/part-dspN-fwtype-system_name.wmfw
- part-dspN-fwtype.wmfw
- cirrus/part-dspN-fwtype.wmfw
- Qualifications are added to the filename so that rightwards is more
specific.
- The system_name is provided by the codec driver.
- The asoc_component_prefix is used to identify tunings for individual
parts because it would already exist to disambiguate the controls
and it makes it obvious which firmware file applies to which device.
The optional coefficient file must have the same filename
construction as the discovered wmfw except:
- where the wmfw has only system_name then the bin file can
optionally include the asoc_component_prefix. This is to allow a
common wmfw for all amps but separate tunings per amp.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220303155016.122125-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes: ab6f6d8521 ("ASoC: fsi: add master clock control functions")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220302062844.46869-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
This device only has 4 TX channels.
Fixes: fe1024d504 ("ASoC: cs35l41: Combine adjacent register writes")
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220304150721.3802-3-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Changes:
1. Revise rt5682s_sar_power_mode and rt5682s_headset_detect to be more
rational.
2. Manually set to the jack-unplugging state via rt5682s_headset_detect
during going to suspend. Close unnecessary powers and prepare for
re-detecting the CBJ during resuming.
3. Simplize rt5682s_resume.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20220307102154.26065-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As the potential failure of the wm8350_register_irq(),
it should be better to check it and return error if fails.
Also, use 'free_' in order to avoid the same code.
Fixes: a6ba2b2dab ("ASoC: Implement WM8350 headphone jack detection")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220304023821.391936-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
This node pointer is returned by of_parse_phandle() with refcount
incremented in this function.
Calling of_node_put() to avoid the refcount leak.
Fixes: 531f67e41d ("ASoC: at91sam9g20ek-wm8731: convert to dt support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220307124539.1743-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "adata->i2s_irq" variable is unsigned so this error handling
code will not work.
Fixes: 87d71a1287 ("ASoC: amd: pcm-dma: Use platform_get_irq() to get the interrupt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220304131534.GD28739@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
The "adata->pdm_irq" variable is unsigned so the error handling will
not work.
Fixes: 87d71a1287 ("ASoC: amd: pcm-dma: Use platform_get_irq() to get the interrupt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220304131335.GB28739@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
The "adata->i2s_irq" is unsigned so this error handling will not
work.
Fixes: 3304a242f4 ("ASoC: amd: Use platform_get_irq_byname() to get the interrupt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220304131449.GC28739@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
HP changed the DMI identification for 2022 devices:
Product Name: HP Spectre x360 Conv 13-ap0001na
Product Name: 8709
This patch relaxes the DMI_MATCH criterion to work with all versions of this product.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Anthony I Gilea <i@cpp.in>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220304204532.54675-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have eleven machine drivers who make explicit references to
gpios. Let's add the dependency.
The use of 'depends on' instead of 'select' is intentional. On one
side it could be argued that the GPIOs are required, but on the other
it might create more issues with randconfig builds. This patch sticks
with the existing direction of using 'depends' on high-level non-audio
dependencies
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220304204532.54675-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch reverts commit 4262ddc2ad ("ASoC: Intel: boards: add
explicit dependency on GPIOLIB when DMIC is used") and all follow-up
additions of this dependency.
Now that the DMIC does not depend on GPIOLIB we can simplify again.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220304204532.54675-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With higher channel counts, we may need higher clock rates. Starting
with SAI v3.1 (i.MX8MM), we can bypass the divider and get a 1:1
bclk:mclk ratio. Add the necessary support.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-8-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
In fsl_sai_set_bclk() we want to calculate the divider that gets us
closest to the desired frequency, so use DIV_ROUND_CLOSEST() instead of
just doing a clk_rate/freq.
Also discard invalid ratios earlier.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-7-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
"ret" is normally used as a variable name for return values. In
fsl_sai_set_bclk() it stores the difference between the desired rate and
the rate we can archieve, so rename it to "diff". Also rename "savesub"
to "bestdiff" as that stores the best difference we have found.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-6-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver tests for the hardware revision being newer than 3.1
with (sai->verid.major >= 3 && sai->verid.minor >= 1). The result
is obviously wrong for hardware revision 4.0. Fix this by storing
the full version in a single variable and comparing to that one.
No practical change at the moment as there is no 4.0 ip version
currently.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-5-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Depending on SAI synchronization mode, the same value is either
written to FSL_SAI_TCR2 or FSL_SAI_RCR2 or nothing is written at all.
As the computation is the same either way, factor it out to make it
clearer what the difference is. No functional change.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-4-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using a boolean "irq_none" to describe the interrupt
handlers return value use a variable of type irqreturn_t and return
it directly. No functional change.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-3-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The fsl_sai driver has FSL_FMT_TRANSMITTER and FSL_FMT_RECEIVER defines
which are used in a single function only then are then only translated
into a bool 'tx' variable. Drop the defines and pass the boolean value
directly to fsl_sai_set_dai_sysclk_tr(). No functional change.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-2-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The Awinic AW8738 is a simple audio amplifier using a single GPIO.
The main difference to simple-amplifier is that there is a "one-wire
pulse control" that allows configuring the amplifier to one of a few
pre-defined modes. This can be used to configure the speaker-guard
function (primarily the power limit for the amplifier).
Add a simple driver that allows setting it up in the device tree
with a specified mode number.
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Co-developed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20220304102452.26856-3-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Some audio hardware cannot support the same slot width for all sample
widths, or a slot width equal to the sample width for all sample widths.
This is usually due either to limitations of the audio serial port or
system clocking restrictions.
A typical example would be:
- 16-bit samples in 16-bit slots
- 24-bit samples in 32-bit slots
The new dai-tdm-slot-width-map property allows setting a mapping of
sample widths and the corresponding tdm slot widths and slot counts.
Although the slot count is usually the same for all cases this does
allow for adding padding slots to maintain the same bitclk frequency.
The property is added to each endpoint node that needs the component
DAI to be told the TDM slot width and count.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220228172754.453783-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Host is trying to acquire semaphore lock based on HW_SEM_RETRY_COUNT
value which is set to 10 by default. So host will loop for 10 times
trying to acquire lock before giving error msg "Failed to acquire HW
lock". Though this loop count of 10 is good enough with most of the
times but we have observed such failure msg in very few cases(~5 %).
Increase ACP_HW_SEM_RETRY_COUNT to avoid such issue and loop for a
significant time period before throwing error. We're setting newer
loop count to quite higher value of 10K but it's very unlikely that
it will loop for this count, since for most of the cases lock will
get acquired at much lesser loop iterations.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220304205733.62233-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are using PTE_GRP1 for DMA operations to load firmware binaries
but we are enabling PTE_GRP and flushing ATU cache much before in
probe callbacks. This can cause issue if we try to load firmware
runtime during system resume as probe callback will not be invoked
hence PTE_GRP will not be enabled. Moreover it makes more sense to
flush the cache after register configuration.
Move PTE group register configuration to acp-loader within pre_fw_run
callback to avoid such issue.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220304205733.62233-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add lock and unlock around ipc irq handling code using hw semaphore
register that exhibit special property for register read calls. As
host and DSP firmware uses few shared registers, there is a possible
race condition around those shared registers values. This lock ensure
synchronization between Firmware and host ipc interrupts.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220304205733.62233-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP_SRAM_PTE block has cache that needs to be flushed after every
PTE updates. This patch updates ACPAXI2AXI_ATU_CTRL register to
flush cache after updating PTE with stream physical address.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220304205733.62233-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ipc_pcm_params() ops implementation for AMD is a NOP and since the
callback is marked now as optional, it can be dropped along with the
empty function.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220304205733.62233-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using the values from ipc_params, take them directly from
substream->runtime.
This is in preparation of making the platform hw_params callback to be
IPC agnostic.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220304205733.62233-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add PCI DID for Intel Raptor Lake S.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220304205733.62233-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Global enable must happen before CSPL_MBOX_CMD_RESUME command
is sent. Move it to PRE_PMU as both events use
SND_SOC_DAPM_OUT_DRV_E macro.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220303173059.269657-4-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix GPIO2 polarity and direction configuration
Fixes: fe1024d504 ("ASoC: cs35l41: Combine adjacent register writes")
Signed-off-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220303173059.269657-2-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Intel HDMI LPE audio driver has its own mmap callback that mimics with
the noncached page attributes, but this is rather superfluous and can
be replaced with the standard helper, as the device is only for
playback and the write-cache should suffice.
This patch drops the own code and just uses the standard helper.
Link: https://lore.kernel.org/r/20220305083308.15718-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
New device id for Corsair Virtuoso SE RGB Wireless that currently is not
in the mixer_map. This entry in the mixer_map is necessary in order to
label its mixer appropriately and allow userspace to pick the correct
volume controls. For instance, my own Corsair Virtuoso SE RGB Wireless
headset has this new ID and consequently, the sidetone and volume are not
working correctly without this change.
> sudo lsusb -v | grep -i corsair
Bus 007 Device 011: ID 1b1c:0a40 Corsair CORSAIR VIRTUOSO SE Wireless Gam
idVendor 0x1b1c Corsair
iManufacturer 1 Corsair
iProduct 2 CORSAIR VIRTUOSO SE Wireless Gaming Headset
Signed-off-by: Reza Jahanbakhshi <reza.jahanbakhshi@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220304212303.195949-1-reza.jahanbakhshi@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AV/C deferred transaction was supported at a commit 00a7bb81c2 ("ALSA:
firewire-lib: Add support for deferred transaction") while 'deferrable'
flag can be uninitialized for non-control/notify AV/C transactions.
UBSAN reports it:
kernel: ================================================================================
kernel: UBSAN: invalid-load in /build/linux-aa0B4d/linux-5.15.0/sound/firewire/fcp.c:363:9
kernel: load of value 158 is not a valid value for type '_Bool'
kernel: CPU: 3 PID: 182227 Comm: irq/35-firewire Tainted: P OE 5.15.0-18-generic #18-Ubuntu
kernel: Hardware name: Gigabyte Technology Co., Ltd. AX370-Gaming 5/AX370-Gaming 5, BIOS F42b 08/01/2019
kernel: Call Trace:
kernel: <IRQ>
kernel: show_stack+0x52/0x58
kernel: dump_stack_lvl+0x4a/0x5f
kernel: dump_stack+0x10/0x12
kernel: ubsan_epilogue+0x9/0x45
kernel: __ubsan_handle_load_invalid_value.cold+0x44/0x49
kernel: fcp_response.part.0.cold+0x1a/0x2b [snd_firewire_lib]
kernel: fcp_response+0x28/0x30 [snd_firewire_lib]
kernel: fw_core_handle_request+0x230/0x3d0 [firewire_core]
kernel: handle_ar_packet+0x1d9/0x200 [firewire_ohci]
kernel: ? handle_ar_packet+0x1d9/0x200 [firewire_ohci]
kernel: ? transmit_complete_callback+0x9f/0x120 [firewire_core]
kernel: ar_context_tasklet+0xa8/0x2e0 [firewire_ohci]
kernel: tasklet_action_common.constprop.0+0xea/0xf0
kernel: tasklet_action+0x22/0x30
kernel: __do_softirq+0xd9/0x2e3
kernel: ? irq_finalize_oneshot.part.0+0xf0/0xf0
kernel: do_softirq+0x75/0xa0
kernel: </IRQ>
kernel: <TASK>
kernel: __local_bh_enable_ip+0x50/0x60
kernel: irq_forced_thread_fn+0x7e/0x90
kernel: irq_thread+0xba/0x190
kernel: ? irq_thread_fn+0x60/0x60
kernel: kthread+0x11e/0x140
kernel: ? irq_thread_check_affinity+0xf0/0xf0
kernel: ? set_kthread_struct+0x50/0x50
kernel: ret_from_fork+0x22/0x30
kernel: </TASK>
kernel: ================================================================================
This commit fixes the bug. The bug has no disadvantage for the non-
control/notify AV/C transactions since the flag has an effect for AV/C
response with INTERIM (0x0f) status which is not used for the transactions
in AV/C general specification.
Fixes: 00a7bb81c2 ("ALSA: firewire-lib: Add support for deferred transaction")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20220304125647.78430-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
vmalloc() is a memory allocation function which can return NULL when
some internal memory errors happen. So it is better to check the return
of it to catch the error in time.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_4221FC4089F6DF01C48F192E5784038BA205@qq.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The variable bytes is being assigned a value that is never read, it
is being re-assigned inside a following if block. The assignment is
redundant and can be removed.
Cleans up clang scan build warning:
sound/pci/echoaudio/midi.c:211:9: warning: Although the value stored
to 'bytes' is used in the enclosing expression, the value is never
actually read from 'bytes' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220302170728.1094633-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fix the second dai driver's dai widget can't connect to the
endpoint. Because "bt-sco-pcm" and "bt-sco-pcm-wb" dai driver have the
same stream_name, so it will cause they have the same widget name.
Therefor it will just create only one route when do snd_soc_dapm_add_route
that only find the widget through the widget name.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Link: https://lore.kernel.org/r/20220302013533.29068-1-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
pcm name can be "Analog" and "Alt Analog", cpcm->name can be
"Analog Codec DAI" and "Alt Analog Codec DAI". When pcm_name
is "Analog", "Analog Codec DAI" and "Alt Analog Codec DAI" are
both satisfy the 'if (strstr(cpcm->name, pcm_name))' condition,
which may cause the returned cpcm to be "Alt Analog Codec DAI".
Even if we get the pcm name by id, and "Analog Codec DAI" goes
into the loop before "Alt Analog Codec DAI", but I still think
we'd better have multiple insurances against unexpected return
values. After, we can correctly return the expected result
even if other relevant places are changed.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220302094351.3487-1-tangmeng@uniontech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Two cleanups to remove an unused filename and typos, and one addition
of an ACPI matching table for a Dell SoundWire SKU without local
microphones.
The main change is the addition of a common 'sof-ssp-amp' machine
driver for devices with amplifiers only (no headset codec) and
different connections using I2S links (Bluetooth offload, HDMI
receiver). It's likely that the amplifier will be swapped out by OEMs,
this machine driver provides a relatively generic solution to avoid
copy-paste of similar solutions.
The copy_to/from_user() functions return the number of bytes remaining
to be copied. This function needs to return negative error codes
because snd_soc_pcm_component_copy_user() treats positive returns as
success in soc_component_ret().
Fixes: 7d7209557b ("ASoC: qcom: Add support for codec dma driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220301081104.GB17375@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
There is one call trace that snd_soc_register_card()
->snd_soc_bind_card()->soc_init_pcm_runtime()
->snd_soc_dai_compress_new()->snd_soc_new_compress().
In the trace the 'codec_dai' transfers from card->dai_link,
and we can see from the snd_soc_add_pcm_runtime() in
snd_soc_bind_card() that, if value of card->dai_link->num_codecs
is 0, then 'codec_dai' could be null pointer caused
by index out of bound in 'asoc_rtd_to_codec(rtd, 0)'.
And snd_soc_register_card() is called by various platforms.
Therefore, it is better to add the check in the case of misusing.
And because 'cpu_dai' has already checked in soc_init_pcm_runtime(),
there is no need to check again.
Adding the check as follow, then if 'codec_dai' is null,
snd_soc_new_compress() will not pass through the check
'if (playback + capture != 1)', avoiding the leftover use of
'codec_dai'.
Fixes: 467fece ("ASoC: soc-dai: move snd_soc_dai_stream_valid() to soc-dai.c")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/1634285633-529368-1-git-send-email-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
In dmaengine_pcm_set_runtime_hwparams() period_bytes_min is hardcoded to
256. For some applications that may be too big. This patch changes that
to calculate the value based on dma_data->maxburst. The correct value
would be maxburst multiplied by the address width of the hardware FIFO.
Unfortunately the address width is dynamically calculated based on the
stream parameters and is not known at open time, so the worst case
is chosen here which is 8 bytes, the maximum that is supported by
dmaengine drivers.
Not all drivers may set a maxburst value, so we fall back to the
previously used hardcoded value of 256 bytes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220301113446.1053171-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
As the potential failure of the clk_enable(),
it should be better to check it, as same as clk_prepare_enable().
Fixes: c9afc1834e ("ASoC: dwc: Disallow building designware_pcm as a module")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220301084742.3751939-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
As the potential failure of the clk_enable(),
it should be better to check it and return error if fals.
Fixes: cbaadf0f90 ("ASoC: atmel_ssc_dai: refactor the startup and shutdown")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220301090637.3776558-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
As the potential failure of the clk_enable(),
it should be better to check it, like mxs_saif_trigger().
Fixes: d0ba4c0149 ("ASoC: mxs-saif: set a base clock rate for EXTMASTER mode work")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220301081717.3727190-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Support configuration with SoundWire RT1316 amplifiers on link0 and
link1, and RT711 on link2 for headphone/headset. This product does not
support local microphones.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220301194903.60859-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support of CS35L41 amplifier to the machine driver, as well as
the support of HDMI playback and BT offload DAI Link.
Rename the driver to a generic name to support different amplifiers
from different vendors.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220301194903.60859-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement cs35l41 support code in this common module so it could be
shared between multiple SOF machine drivers.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220301194903.60859-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the code related to rt1308 dai link to the realtek common module.
It creates a clean base to add more amplifier support to this machine
driver in the future.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220301194903.60859-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move sof_realtek_common.o to a dedicated module like the module to
support maxim amplifiers.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220301194903.60859-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding separate I2S machine driver for RT1308.
Adding support for HDMI-In capture via I2S in slave mode configuration.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: balamurugan.c <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220301194903.60859-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
copy/paste spelling issues with platforms and buttons.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: FRED OH <fred.oh@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220301194903.60859-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We've been using a default firmware name for each PCI/ACPI/OF platform
for a while. The machine-specific sof_fw_filename is in practice not
different from the default, and newer devices don't set this field, so
let's remove the redundant definitions.
When OEMs modify the base firmware, they can keep the same firmware
name but store the file in a separate directory.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220301194903.60859-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM buffers might be allocated dynamically when the buffer
preallocation failed or a larger buffer is requested, and it's not
guaranteed that substream->dma_buffer points to the actually used
buffer. The driver needs to refer to substream->runtime->dma_addr
instead for the buffer address.
Signed-off-by: Zhen Ni <nizhen@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220302074241.30469-1-nizhen@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
WSA SoundWire Controller does not support Clock stop and performs a soft reset
on suspend resume path. Its recommended that WSA881x codecs connected to this
are also reset using a hard reset during suspend resume.
So this codec driver performs a hard reset during suspend resume cycle.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220228144235.24208-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Return the result from file->f_op->open() directly instead of
taking this in another redundant variable. Make the typical
return the last statement, return early and reduce the indentation
too.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220228050253.1649-2-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Initializing the static variable to 0 causes the following error
when exec checkpatch:
ERROR: do not initialise statics to 0
FILE: sound/sound_core.c:142:
static int preclaim_oss = 0;
In addition, considering the following way of writing
139: #ifdef config_sound_oss_core_preclaim
140: Static int preclaim_oss = 1;
141: #ELSE
142: Static int preclaim_oss = 0;
143: #ENDIF
We can optimize it by IS_ENABLED(CONFIG_SOUND_OSS_CORE_PRECLAIM),
so modified it to
static int preclaim_oss = IS_ENABLED(CONFIG_SOUND_OSS_CORE_PRECLAIM);
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220228050253.1649-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes: 3568459a51 ("ALSA: at73c213: manage SSC clock")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220228022839.3547266-1-jiasheng@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220225111929.17194-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
I have no reason to believe these boards have any more users and I
haven't tested them for several years. Removing them may simplify
other changes to the various PXA boards people still care about.
The recent conversion of pxa2xx_spi to GPIO descriptors for example
had to update this board despite no one caring or testing.
Great boards that got me started in kernel development, RIP!
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Daniel Mack <daniel@zonque.org>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: soc@kernel.org
Link: https://lore.kernel.org/r/20220227134431.908998-1-jic23@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As part of moving to remove the old style defines for the bus clocks update
the es7241 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222223300.3120298-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max98927 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-10-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max98926 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-9-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max98925 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-8-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max9867 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-7-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max9860 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-6-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max9850 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-5-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max98390 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max98371 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-3-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max98095 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the max98088 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222234026.712070-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the uda134x driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223003409.1820405-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the ml26124 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223001636.1321505-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the pcm512x driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223014846.2765382-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the pcm3168a driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223014846.2765382-3-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the pcm186x driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223014846.2765382-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the pcm1681 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223014846.2765382-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the pcm3060 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223014731.2765283-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Since 70d435ba1c ("ASoC: imx-pcm-dma: simplify pcm_config") the size
argument to imx_pcm_dma_init() is unused, so drop it. Also remove the
now unused defines that the users of imx_pcm_dma_init() used to pass the
size argument
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220223130625.3430589-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The print function dev_err() is redundant because platform_get_irq()
already prints an error.
Eliminate the follow coccicheck warning:
./sound/soc/mediatek/mt8195/mt8195-afe-pcm.c:3126:2-9: line 3126 is
redundant because platform_get_irq() already prints an error
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220224011046.76904-1-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes: 5f9a50c3e5 ("ASoC: Davinci: McBSP: add device tree support for McBSP")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220228031540.3571959-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the mc13783 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223001416.1235951-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the isabelle driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222225014.3691208-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The previous condition is used to cross check only the active
stream status for I2S HS instance playback and capture use cases.
Modified logic to invoke sequence for two i2s controller instances.
This also fixes warnings reported by kernel robot:
"warning: variable 'frmt_val' set but not used"
"warning: variable 'reg_val' set but not used"
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20220225193054.24916-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the es8328 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222223534.3212743-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the inno_rk3036 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222224816.3636987-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the es8316 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222223453.3190333-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the wl1273 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223003810.1947495-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the es7134 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222222715.2994339-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the twl4030 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220223003046.1697784-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the uda1334 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223003207.1748248-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the uda1380 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223003707.1903798-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the si476x driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223001737.1360028-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the sti-sas driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223002502.1451015-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220227050928.32270-1-tangmeng@uniontech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the tscs454 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223002751.1574345-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the tscs42xx driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220223002751.1574345-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the lm49453 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220222225135.3726158-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for enabling required power domains in digital macro codecs.
macro and dcodec power domains are being requested as clocks by HLOS
in ADSP based architectures and ADSP internally handling as powerdomains.
In ADSP bypass case need to handle them as power domains explicitly.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/1645898959-11231-2-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:
This patchset adds support for runtime pm on tx/rx/wsa/wcd lpass macro,
wsa881x and wcd938x codecs that are wired up on SoundWire bus. During
pm testing it was also found that soundwire clks enabled by lpass macros
are not enabling all the required clocks correctly, so last 3 patches
corrects them.
Tested this on SM8250 MTP along SoundWire In band Headset Button wakeup
interrupts.
under low power state a SoundWire Wake IRQ could trigger MBHC interrupts
so make sure that codec is not in suspended state when this happens.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-17-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For SoundWire Frame sync to be generated correctly we need both MCLK
and MCLKx2 (npl). Without pm runtime enabled these two clocks will remain on,
however after adding pm runtime support its possible that NPl clock could be
turned off even when SoundWire controller is active.
Fix this by enabling mclk and npl clk when SoundWire clks are enabled.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-10-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For SoundWire Frame sync to be generated correctly we need both MCLK
and MCLKx2 (npl). Without pm runtime enabled these two clocks will remain on,
however after adding pm runtime support its possible that NPl clock could be
turned off even when SoundWire controller is active.
Fix this by enabling mclk and npl clk when SoundWire clks are enabled.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-9-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For SoundWire Frame sync to be generated correctly we need both MCLK
and MCLKx2 (npl). Without pm runtime enabled these two clocks will remain on,
however after adding pm runtime support its possible that NPl clock could be
turned off even when SoundWire controller is active.
Fix this by enabling mclk and npl clk when SoundWire clks are enabled.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-8-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Using bulk clocks and referencing them individually using array index is
not great for readers.
So move them to individual clocks handling and also remove some unnecessary
error handling in the code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Using bulk clocks and referencing them individually using array index is
not great for readers.
So move them to individual clocks handling and also remove some unnecessary
error handling in the code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Using bulk clocks and referencing them individually using array index is
not great for readers.
So move them to individual clocks handling and also remove some unnecessary
error handling in the code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Using bulk clocks and referencing them individually using array index is
not great for readers.
So move them to individual clocks handling and also remove some unnecessary
error handling in the code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The function devm_kzalloc() in acp_legacy_dai_links_create() can fail,
so its return value should be checked.
Fixes: d4c750f2c7 ("ASoC: amd: acp: Add generic machine driver support for ACP cards")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20220225131645.27556-1-baijiaju1990@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function devm_kzalloc() in rt5663_parse_dp() can fail, so its return
value should be checked.
Fixes: 457c25efc5 ("ASoC: rt5663: Add the function of impedance sensing")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20220225131030.27248-1-baijiaju1990@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Other commit added the declaration of the sof_compressed_ops, drop the
instance which added it as Platform specific ops, which the
sof_compressed_ops is not.
76cdd90b27 ("ASoC: SOF: pcm: Add compress_ops for SOF platform component driver")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220225120034.11028-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_byname().
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220225112358.19403-1-tangmeng@uniontech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the common compare helper from component.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Jeremy Szu <jeremy.szu@canonical.com>
Cc: Werner Sembach <wse@tuxedocomputers.com>
Cc: Hui Wang <hui.wang@canonical.com>
Cc: Cameron Berkenpas <cam@neo-zeon.de>
Cc: Kailang Yang <kailang@realtek.com>
Cc: Lucas Tanure <tanureal@opensource.cirrus.com>
Cc: Sami Loone <sami@loone.fi>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20220214060819.7334-24-yong.wu@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge series from Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>:
This patch set is to add support for Audio over wcd codec,
digital mics, through digital codecs and without ADSP.
Changes Since V15:
-- Bisect patches to avoid build failure in other architectures.
-- Remove redundant variables lpass variant structure.
Changes Since V14:
-- Split common wrapper function to separate wrapper for each handle in platform driver.
-- Update cdc dma buffer handling with memremap with ioremap.
-- Remove redundant error prints.
-- Update irq flag.
Changes Since V13:
-- Change bulk cdc clock voting to individual clock voting.
-- Remove redundant code, conditional check and prints.
-- Fix typo errors.
Changes Since V12:
-- Fix arguments type mismatch.
Changes Since V11:
-- Fix kernel robot issue on arguments type mismatch.
Changes Since V10:
-- Split bulk clock voting to individual clock voting as per use case in cdc-dma driver.
-- Add missing codec dma clocks.
-- Update rxtx lpm buffer size.
Changes Since V9:
-- Change individual clock voting to bulk clock voting of lpass-sc7280 platform driver.
-- Remove redundant clocks in lpass variant structure.
-- Add mclk for MI2S based headset path.
-- Remove unused lpass variant structure members in lpass header.
Changes Since V8:
-- Fix errors in sc7280 lpass cpu dt-bindings.
-- Move to quicinc domain email id's.
Changes Since V7:
-- Fix indentation errors.
-- Bisect patches to avoid interdependency.
Changes Since V6:
-- Split cdc dma regmap config macros.
-- Add write dma reg fields for i2s path.
-- Add helper function to distinguish rxtx and va dma ports.
-- Optimizing clock and reg name in cpu dt-bindings.
-- Update buffer management for cdc dma path.
-- Remove Kconfig fields of machine driver.
Changes Since V5:
-- Include MI2S primary node to snd_soc_dai_driver in lpass-sc7280 platform driver.
-- Move dependency patch list to corresponding patch.
-- Add support for missing cdc-dma ports.
-- Change if/else conditional statements to switch cases.
-- Add missing error handlings.
-- Typo errors fix.
Changes Since V4:
-- Remove unused variable in lpass-sc7280 platform driver.
Changes Since V3:
-- Remove redundant power domain controls. As power domains can be configured from dtsi.
Changes Since V2:
-- Split lpass sc7280 cpu driver patch and create regmap config patch.
-- Create patches based on latest kernel tip.
-- Add helper function to get dma control and lpaif handle.
-- Remove unused variables.
Changes Since V1:
-- Typo errors fix
-- CPU driver readable/writable apis optimization.
-- Add Missing config patch
-- Add Common api for repeated dmactl initialization.
Srinivasa Rao Mandadapu (9):
ASoC: qcom: Move lpass_pcm_data structure to lpass header
ASoC: qcom: lpass: Add dma fields for codec dma lpass interface
ASoC: qcom: Add helper function to get dma control and lpaif handle
ASoC: qcom: Add register definition for codec rddma and wrdma
ASoC: qcom: Add regmap config support for codec dma driver
ASoC: qcom: Add support for codec dma driver
ASoC: qcom: Add lpass CPU driver for codec dma control
ASoC: dt-bindings: Add SC7280 lpass cpu bindings
ASoC: qcom: lpass-sc7280: Add platform driver for lpass audio
.../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 75 ++-
sound/soc/qcom/Kconfig | 11 +
sound/soc/qcom/Makefile | 4 +
sound/soc/qcom/lpass-cdc-dma.c | 301 ++++++++++
sound/soc/qcom/lpass-cpu.c | 253 ++++++++-
sound/soc/qcom/lpass-lpaif-reg.h | 127 ++++-
sound/soc/qcom/lpass-platform.c | 628 ++++++++++++++++++---
sound/soc/qcom/lpass-sc7280.c | 438 ++++++++++++++
sound/soc/qcom/lpass.h | 141 +++++
9 files changed, 1890 insertions(+), 88 deletions(-)
create mode 100644 sound/soc/qcom/lpass-cdc-dma.c
create mode 100644 sound/soc/qcom/lpass-sc7280.c
--
2.7.4
Fix the following sparse error:
sound/soc/sof/compress.c:310:25: error: symbol 'sof_compressed_ops' was not declared. Should it be static?
Do not enable set the pd->compress_ops yet as it is not a valid assumption
that real compress support really works when CONFIG_SND_SOC_SOF_COMPRESS
is set as the HDA Probes support also selects it, but compressed audio
is not supported (yet) on Intel platforms.
Fixes: 6324cf901e ("ASoC: SOF: compr: Add compress ops implementation")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220224172324.17976-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown