Commit graph

16 commits

Author SHA1 Message Date
James Bottomley
c9802cd957 Merge mulgrave-w:git/scsi-misc-2.6
Conflicts:

	drivers/scsi/iscsi_tcp.c
	drivers/scsi/iscsi_tcp.h

Pretty horrible merge between crypto hash consolidation
and crypto_digest_...->crypto_hash_... conversion

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 15:33:43 -05:00
Herbert Xu
dc64ddf491 [SCSI] iscsi: Use crypto_hash interface instead of crypto_digest
This patch converts ISCSI to use the new crypto_hash interface instead
of crypto_digest.  It's a fairly straightforward substitution.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-21 11:46:20 +10:00
Mike Christie
dd8c0d9586 [SCSI] scsi_tcp: rm data rx and tx tfms
We currently allocated seperate tfms for data and header digests. There
is no reason for this since we can never calculate a rx header and
digest at the same time. Same for sends. So this patch removes the data
tfms and has the send and recv sides use the rx_tfm or tx_tfm.

I also made the connection creation code preallocate the tfms because I
thought I hit a bug where I changed the digests settings during a
relogin but could not allocate the tfm and then we just failed.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02 13:37:18 -05:00
Mike Christie
62f383003c [SCSI] iscsi_tcp: fix padding, data digests, and IO at weird offsets
iscsi_tcp calculates padding by using the expected transfer length. This
has the problem where if we have immediate data = no and initial R2T =
yes, and the transfer length ended up needing padding then we send:

1. header
2. padding which should have gone after data
3. data

Besides this bug, we also assume the target will always ask for nice
transfer lengths and the first burst length will always be a nice value.
As far as I can tell form the RFC this is not a requirement. It would be
silly to do this, but if someone did it we will end doing bad things.

Finally the last bug in that bit of code is in our handling of the
recalculation of data digests when we do not send a whole iscsi_buf in
one try. The bug here is that we call crypto_digest_final on a
iscsi_sendpage error, then when we send the rest of the iscsi_buf, we
doiscsi_data_digest_init and this causes the previous data digest to be
lost.

And to make matters worse, some of these bugs are replicated over and
over and over again for immediate data, solicited data and unsolicited
data. So the attached patch made over the iscsi git tree (see
kernel.org/git for details) which I updated today to include the patches
I said I merged, consolidates the sending of data, padding and digests
and calculation of data digests and fixes the above bugs.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02 13:37:14 -05:00
Mike Christie
ffd0436ed2 [SCSI] libiscsi, iscsi_tcp, iscsi_iser: check that burst lengths are valid.
iSCSI RFC states that the first burst length must be smaller than the
max burst length. We currently assume targets will be good, but that may
not be the case, so this patch adds a check.

This patch also moves the unsol data out offset to the lib so the LLDs
do not have to track it.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02 13:37:04 -05:00
Mike Christie
c8dc1e523b [SCSI] iscsi bugfixes: reduce memory allocations
We currently try to allocate a max_recv_data_segment_length
which can be very large (default is 64K), and common uses
are up to 1MB. It is very very difficult to allocte this
much contiguous memory and it turns out we never even use it.
We really only need a couple of pages, so this patch has us
allocates just what we know what we need today.

Later if vendors start adding vendor specific data and
we need to handle large buffers we can do this, but for
the last 4 years we have not seen anyone do this or request
it.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28 11:49:34 -05:00
Mike Christie
ffbfe92533 [SCSI] iscsi: kill dtask mempools
Discovered by steven@hayter.me.uk and patch by michaelc@cs.wisc.edu

The dtask mempool is reserving 261120 items per session! Since we are now
sending headers with sendmsg there is no reason for the mempool and that
was causing us to us carzy amounts of mem. We can preallicate a header in
the r2t and task struct and reuse them

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:35:20 -05:00
Mike Christie
5bb0b55a32 [SCSI] iscsi: convert iscsi tcp to libiscsi
This just converts iscsi_tcp to the lib

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14 15:19:42 -05:00
Mike Christie
30a6c65236 [SCSI] iscsi: fix up iscsi eh
The current iscsi_tcp eh is not nicely setup for dm-multipath
and performs some extra task management functions when they
are not needed.

The attached patch:

- Fixes the TMF issues. If a session is rebuilt
then we do not send aborts.

- Fixes the problem where if the host reset fired, we would
return SUCCESS even though we had not really done anything
yet. This ends up causing problem with scsi_error.c's TUR.

- If someone has turned on the userspace nop daemon code to try
and detect network problems before the scsi command timeout
we can now drop and clean up the session before the scsi command
timesout and fires the eh speeding up the time it takes for a
command to go from one patch to another. For network problems
we fail the command with DID_BUS_BUSY so if failfast is set
scsi_decide_disposition fails the command up to dm for it to
try on another path.

- And we had to add some basic iscsi session block code. Previously
if we were trying to repair a session we would retrun a MLQUEUE code
in the queuecommand. This worked but it was not the most efficient
or pretty thing to do since it would take a while to relogin
to the target. For iscsi_tcp/open-iscsi a lot of the iscsi error handler
is in userspace the block code is pretty bare. We will be
adding to that for qla4xxx.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14 14:05:09 -05:00
Mike Christie
1fd459e367 [SCSI] iscsi update: rm conn lock
>From erezz@voltaire.com:

rm conn->lock since it is not used anymore. The dataqueue is protected
by the session lock and xmitmutex.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Alex Aizman <itn780@yahoo.com>
Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04 16:19:08 -06:00
Mike Christie
7b7232f3fb [SCSI] iscsi update: cleanup iscsi class interface
From:
michaelc@cs.wisc.edu
fujita.tomonori@lab.ntt.co.jp
da-x@monatomic.org

and err path fixup from:
ogerlitz@voltaire.com

This patch cleans up that interface by having the lld and class
pass a iscsi_cls_session or iscsi_cls_conn between each other when
the function is used by HW and SW iscsi llds. This way the lld
does not have to remember if it has to send a handle or pointer
and a handle or pointer to connection, session or host.

This also has the class verify the session handle that gets passed from
userspace instead of using the pointer passed into the kernel directly.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Alex Aizman <itn780@yahoo.com>
Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04 16:17:03 -06:00
Mike Christie
7cae5159dd [SCSI] iscsi: add high mem support
From Mike Christie <michaelc@cs.wisc.edu> and FUJITA Tomonori <tomof@acm.org>:

We cannot use page_address becuase some pages could be highmem.
Instead, we can use sock_no_sendpage which does kmap for us.

Signed-off-by: Alex Aizman <itn780@yahoo.com>
Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:18 -06:00
FUJITA Tomonori
56851698c2 [SCSI] iscsi: data digest page cache usage fix
Users can write to a page while we are sending it and making
digest calculations. This ends up causing us to retry the command
when a digest error is later reported. By using sock_no_sendpage
when data digests are calculated we can avoid a lot of (not all but it
helps) the retries becuase sock_no_sendpage is not zero copy.

Signed-off-by: Alex Aizman <itn780@yahoo.com>
Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:17 -06:00
Arjan van de Ven
0b95067238 [SCSI] turn most scsi semaphores into mutexes
the scsi layer is using semaphores in a mutex way, this patch converts
these into using mutexes instead

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-12 11:53:11 -06:00
Mike Christie
9e3961ba2b [SCSI] iscsi: lower queue depth
From Wang Zhenyu:

High queue depth was a problem for some targets so make queue_depth adjustable

From Mike Christie

Make default queue_depth a little lower

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Alex Aizman <itn780@yahoo.com>
Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13 18:12:00 -07:00
Alex Aizman
c213ca0792 [SCSI] open-iscsi/linux-iscsi-5 Initiator: Initiator header
drivers/scsi/iscsi_tcp.h, header file.

Signed-off-by: Alex Aizman <itn780@yahoo.com>
Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-06 09:34:20 -05:00