0day reported a regression on a microbenchmark which is intended to
stress the TLB flushing path:
https://lore.kernel.org/all/20220317090415.GE735@xsang-OptiPlex-9020/
It pointed at a commit from Nadav which intended to remove retpoline
overhead in the TLB flushing path by taking the 'cond'-ition in
on_each_cpu_cond_mask(), pre-calculating it, and incorporating it into
'cpumask'. That allowed the code to use a bunch of earlier direct
calls instead of later indirect calls that need a retpoline.
But, in practice, threads can go idle (and into lazy TLB mode where
they don't need to flush their TLB) between the early and late calls.
It works in this direction and not in the other because TLB-flushing
threads tend to hold mmap_lock for write. Contention on that lock
causes threads to _go_ idle right in this early/late window.
There was not any performance data in the original commit specific
to the retpoline overhead. I did a few tests on a system with
retpolines:
https://lore.kernel.org/all/dd8be93c-ded6-b962-50d4-96b1c3afb2b7@intel.com/
which showed a possible small win. But, that small win pales in
comparison with the bigger loss induced on non-retpoline systems.
Revert the patch that removed the retpolines. This was not a
clean revert, but it was self-contained enough not to be too painful.
Fixes: 6035152d8e ("x86/mm/tlb: Open-code on_each_cpu_cond_mask() for tlb_is_not_lazy()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Nadav Amit <namit@vmware.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/164874672286.389.7021457716635788197.tip-bot2@tip-bot2
- Make the prctl() for enabling dynamic XSTATE components correct so it
adds the newly requested feature to the permission bitmap instead of
overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor cannot
emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it takes
the feature set of the fpstate buffer into account. The feature sets
can differ between host and guest buffers. Guest buffers do not contain
supervisor states. So far this was not an issue, but with enabling
PASID it needs to be handled in the buffer offset calculation and in
the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the values
early in the FPU/XSTATE code.
- Enable CONFIG_WERROR for X86.
- Make the X86 defconfigs more useful by adapting them to Y2022 reality.
-----BEGIN PGP SIGNATURE-----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=GK27
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and updates:
- Make the prctl() for enabling dynamic XSTATE components correct so
it adds the newly requested feature to the permission bitmap
instead of overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor
cannot emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it
takes the feature set of the fpstate buffer into account. The
feature sets can differ between host and guest buffers. Guest
buffers do not contain supervisor states. So far this was not an
issue, but with enabling PASID it needs to be handled in the buffer
offset calculation and in the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the
values early in the FPU/XSTATE code.
- Enable CONFIG_WERROR in x86 defconfig.
- Make the X86 defconfigs more useful by adapting them to Y2022
reality"
* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Consolidate size calculations
x86/fpu/xstate: Handle supervisor states in XSTATE permissions
x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
x86/fpu: Cache xfeature flags from CPUID
x86/fpu/xsave: Initialize offset/size cache early
x86/fpu: Remove unused supervisor only offsets
x86/fpu: Remove redundant XCOMP_BV initialization
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
x86/config: Make the x86 defconfigs a bit more usable
x86/defconfig: Enable WERROR
selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
generalized.
-----BEGIN PGP SIGNATURE-----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=mJKF
-----END PGP SIGNATURE-----
Merge tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RT signal fix from Thomas Gleixner:
"Revert the RT related signal changes. They need to be reworked and
generalized"
* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
* Documentation improvements
* Prevent module exit until all VMs are freed
* PMU Virtualization fixes
* Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences
* Other miscellaneous bugfixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJIGV8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO5FQgAhls4+Nu+NqId/yvvyNxr3vXq0dHI
hLlHtvzgGzZisZ7y2bNeyIpJVBDT5LCbrptPD/5eTvchVswDh0+kCVC0Uni5ugGT
tLT/Pv9Oq9e0X7aGdHRyuHIivIFDC20zIZO2DV48Lrj/+r6DafB2Fghq2XQLlBxN
p8KislvuqAAos543BPC1+Lk3dhOLuZ8qcFD8wGRlcCwjNwYaitrQ16rO04cLfUur
OwIks1I6TdI2JpLBhm6oWYVG/YnRsoo4bQE8cjdQ6yNSbwWtRpV33q7X6onw8x8K
BEeESoTnMqfaxIF/6mPl6bnDblVHFp6Xhld/vJcgeWQTdajFtuFE/K4sCA==
=xnQ6
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
- Documentation improvements
- Prevent module exit until all VMs are freed
- PMU Virtualization fixes
- Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences
- Other miscellaneous bugfixes
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: fix sending PV IPI
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
KVM: x86: Remove redundant vm_entry_controls_clearbit() call
KVM: x86: cleanup enter_rmode()
KVM: x86: SVM: fix tsc scaling when the host doesn't support it
kvm: x86: SVM: remove unused defines
KVM: x86: SVM: move tsc ratio definitions to svm.h
KVM: x86: SVM: fix avic spec based definitions again
KVM: MIPS: remove reference to trap&emulate virtualization
KVM: x86: document limitations of MSR filtering
KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set
KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
KVM: x86: Trace all APICv inhibit changes and capture overall status
KVM: x86: Add wrappers for setting/clearing APICv inhibits
KVM: x86: Make APICv inhibit reasons an enum and cleanup naming
KVM: X86: Handle implicit supervisor access with SMAP
KVM: X86: Rename variable smap to not_smap in permission_fault()
...
If apic_id is less than min, and (max - apic_id) is greater than
KVM_IPI_CLUSTER_SIZE, then the third check condition is satisfied but
the new apic_id does not fit the bitmask. In this case __send_ipi_mask
should send the IPI.
This is mostly theoretical, but it can happen if the apic_ids on three
iterations of the loop are for example 1, KVM_IPI_CLUSTER_SIZE, 0.
Fixes: aaffcfd1e8 ("KVM: X86: Implement PV IPIs in linux guest")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-Id: <1646814944-51801-1-git-send-email-lirongqing@baidu.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
FNAME(cmpxchg_gpte) is an inefficient mess. It is at least decent if it
can go through get_user_pages_fast(), but if it cannot then it tries to
use memremap(); that is not just terribly slow, it is also wrong because
it assumes that the VM_PFNMAP VMA is contiguous.
The right way to do it would be to do the same thing as
hva_to_pfn_remapped() does since commit add6a0cd1c ("KVM: MMU: try to
fix up page faults before giving up", 2016-07-05), using follow_pte()
and fixup_user_fault() to determine the correct address to use for
memremap(). To do this, one could for example extract hva_to_pfn()
for use outside virt/kvm/kvm_main.c. But really there is no reason to
do that either, because there is already a perfectly valid address to
do the cmpxchg() on, only it is a userspace address. That means doing
user_access_begin()/user_access_end() and writing the code in assembly
to handle exceptions correctly. Worse, the guest PTE can be 8-byte
even on i686 so there is the extra complication of using cmpxchg8b to
account for. But at least it is an efficient mess.
(Thanks to Linus for suggesting improvement on the inline assembly).
Reported-by: Qiuhao Li <qiuhao@sysec.org>
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Reported-by: syzbot+6cde2282daa792c49ab8@syzkaller.appspotmail.com
Debugged-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Fixes: bd53cb35a3 ("X86/KVM: Handle PFNs outside of kernel reach when touching GPTEs")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When emulating exit from long mode, EFER_LMA is cleared with
vmx_set_efer(). This will already unset the VM_ENTRY_IA32E_MODE control
bit as requested by SDM, so there is no need to unset VM_ENTRY_IA32E_MODE
again in exit_lmode() explicitly. In case EFER isn't supported by
hardware, long mode isn't supported, so exit_lmode() cannot be reached.
Note that, thanks to the shadow controls mechanism, this change doesn't
eliminate vmread or vmwrite.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220311102643.807507-3-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmx_set_efer() sets uret->data but, in fact if the value of uret->data
will be used vmx_setup_uret_msrs() will have rewritten it with the value
returned by update_transition_efer(). uret->data is consumed if and only
if uret->load_into_hardware is true, and vmx_setup_uret_msrs() takes care
of (a) updating uret->data before setting uret->load_into_hardware to true
(b) setting uret->load_into_hardware to false if uret->data isn't updated.
Opportunistically use "vmx" directly instead of redoing to_vmx().
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220311102643.807507-2-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It was decided that when TSC scaling is not supported,
the virtual MSR_AMD64_TSC_RATIO should still have the default '1.0'
value.
However in this case kvm_max_tsc_scaling_ratio is not set,
which breaks various assumptions.
Fix this by always calculating kvm_max_tsc_scaling_ratio regardless of
host support. For consistency, do the same for VMX.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Another piece of SVM spec which should be in the header file
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to wrong rebase, commit
4a204f7895 ("KVM: SVM: Allow AVIC support on system w/ physical APIC ID > 255")
moved avic spec #defines back to avic.c.
Move them back, and while at it extend AVIC_DOORBELL_PHYSICAL_ID_MASK to 12
bits as well (it will be used in nested avic)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If MSR access is rejected by MSR filtering,
kvm_set_msr()/kvm_get_msr() would return KVM_MSR_RET_FILTERED,
and the return value is only handled well for rdmsr/wrmsr.
However, some instruction emulation and state transition also
use kvm_set_msr()/kvm_get_msr() to do msr access but may trigger
some unexpected results if MSR access is rejected, E.g. RDPID
emulation would inject a #UD but RDPID wouldn't cause a exit
when RDPID is supported in hardware and ENABLE_RDTSCP is set.
And it would also cause failure when load MSR at nested entry/exit.
Since msr filtering is based on MSR bitmap, it is better to only
do MSR filtering for rdmsr/wrmsr.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <2b2774154f7532c96a6f04d71c82a8bec7d9e80b.1646655860.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When RDTSCP is supported but RDPID is not supported in host,
RDPID emulation is available. However, __kvm_get_msr() would
only fail when RDTSCP/RDPID both are disabled in guest, so
the emulator wouldn't inject a #UD when RDPID is disabled but
RDTSCP is enabled in guest.
Fixes: fb6d4d340e ("KVM: x86: emulate RDPID")
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <1dfd46ae5b76d3ed87bde3154d51c64ea64c99c1.1646226788.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HSW_IN_TX* bits are used in generic code which are not supported on
AMD. Worse, these bits overlap with AMD EventSelect[11:8] and hence
using HSW_IN_TX* bits unconditionally in generic code is resulting in
unintentional pmu behavior on AMD. For example, if EventSelect[11:8]
is 0x2, pmc_reprogram_counter() wrongly assumes that
HSW_IN_TX_CHECKPOINTED is set and thus forces sampling period to be 0.
Also per the SDM, both bits 32 and 33 "may only be set if the processor
supports HLE or RTM" and for "IN_TXCP (bit 33): this bit may only be set
for IA32_PERFEVTSEL2."
Opportunistically eliminate code redundancy, because if the HSW_IN_TX*
bit is set in pmc->eventsel, it is already set in attr.config.
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reported-by: Jim Mattson <jmattson@google.com>
Fixes: 103af0a987 ("perf, kvm: Support the in_tx/in_tx_cp modifiers in KVM arch perfmon emulation v5")
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220309084257.88931-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It makes more sense to print new SPTE value than the
old value.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220302102457.588450-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD EPYC CPUs never raise a #GP for a WRMSR to a PerfEvtSeln MSR. Some
reserved bits are cleared, and some are not. Specifically, on
Zen3/Milan, bits 19 and 42 are not cleared.
When emulating such a WRMSR, KVM should not synthesize a #GP,
regardless of which bits are set. However, undocumented bits should
not be passed through to the hardware MSR. So, rather than checking
for reserved bits and synthesizing a #GP, just clear the reserved
bits.
This may seem pedantic, but since KVM currently does not support the
"Host/Guest Only" bits (41:40), it is necessary to clear these bits
rather than synthesizing #GP, because some popular guests (e.g Linux)
will set the "Host Only" bit even on CPUs that don't support
EFER.SVME, and they don't expect a #GP.
For example,
root@Ubuntu1804:~# perf stat -e r26 -a sleep 1
Performance counter stats for 'system wide':
0 r26
1.001070977 seconds time elapsed
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379957] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000130026) at rIP: 0xffffffff9b276a28 (native_write_msr+0x8/0x30)
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379958] Call Trace:
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379963] amd_pmu_disable_event+0x27/0x90
Fixes: ca724305a2 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM")
Reported-by: Lotus Fenn <lotusf@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Like Xu <likexu@tencent.com>
Reviewed-by: David Dunn <daviddunn@google.com>
Message-Id: <20220226234131.2167175-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Trace all APICv inhibit changes instead of just those that result in
APICv being (un)inhibited, and log the current state. Debugging why
APICv isn't working is frustrating as it's hard to see why APICv is still
inhibited, and logging only the first inhibition means unnecessary onion
peeling.
Opportunistically drop the export of the tracepoint, it is not and should
not be used by vendor code due to the need to serialize toggling via
apicv_update_lock.
Note, using the common flow means kvm_apicv_init() switched from atomic
to non-atomic bitwise operations. The VM is unreachable at init, so
non-atomic is perfectly ok.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220311043517.17027-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add set/clear wrappers for toggling APICv inhibits to make the call sites
more readable, and opportunistically rename the inner helpers to align
with the new wrappers and to make them more readable as well. Invert the
flag from "activate" to "set"; activate is painfully ambiguous as it's
not obvious if the inhibit is being activated, or if APICv is being
activated, in which case the inhibit is being deactivated.
For the functions that take @set, swap the order of the inhibit reason
and @set so that the call sites are visually similar to those that bounce
through the wrapper.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220311043517.17027-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use an enum for the APICv inhibit reasons, there is no meaning behind
their values and they most definitely are not "unsigned longs". Rename
the various params to "reason" for consistency and clarity (inhibit may
be confused as a command, i.e. inhibit APICv, instead of the reason that
is getting toggled/checked).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220311043517.17027-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two kinds of implicit supervisor access
implicit supervisor access when CPL = 3
implicit supervisor access when CPL < 3
Current permission_fault() handles only the first kind for SMAP.
But if the access is implicit when SMAP is on, data may not be read
nor write from any user-mode address regardless the current CPL.
So the second kind should be also supported.
The first kind can be detect via CPL and access mode: if it is
supervisor access and CPL = 3, it must be implicit supervisor access.
But it is not possible to detect the second kind without extra
information, so this patch adds an artificial PFERR_EXPLICIT_ACCESS
into @access. This extra information also works for the first kind, so
the logic is changed to use this information for both cases.
The value of PFERR_EXPLICIT_ACCESS is deliberately chosen to be bit 48
which is in the most significant 16 bits of u64 and less likely to be
forced to change due to future hardware uses it.
This patch removes the call to ->get_cpl() for access mode is determined
by @access. Not only does it reduce a function call, but also remove
confusions when the permission is checked for nested TDP. The nested
TDP shouldn't have SMAP checking nor even the L2's CPL have any bearing
on it. The original code works just because it is always user walk for
NPT and SMAP fault is not set for EPT in update_permission_bitmask.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20220311070346.45023-5-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Comments above the variable says the bit is set when SMAP is overridden
or the same meaning in update_permission_bitmask(): it is not subjected
to SMAP restriction.
Renaming it to reflect the negative implication and make the code better
readability.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20220311070346.45023-4-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The commit 09f037aa48 ("KVM: MMU: speedup update_permission_bitmask")
refactored the code of update_permission_bitmask() and change the
comments. It added a condition into a list to match the new code,
so the number/order for conditions in the comments should be updated
too.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20220311070346.45023-3-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change the type of access u32 to u64 for FNAME(walk_addr) and
->gva_to_gpa().
The kinds of accesses are usually combinations of UWX, and VMX/SVM's
nested paging adds a new factor of access: is it an access for a guest
page table or for a final guest physical address.
And SMAP relies a factor for supervisor access: explicit or implicit.
So @access in FNAME(walk_addr) and ->gva_to_gpa() is better to include
all these information to do the walk.
Although @access(u32) has enough bits to encode all the kinds, this
patch extends it to u64:
o Extra bits will be in the higher 32 bits, so that we can
easily obtain the traditional access mode (UWX) by converting
it to u32.
o Reuse the value for the access kind defined by SVM's nested
paging (PFERR_GUEST_FINAL_MASK and PFERR_GUEST_PAGE_MASK) as
@error_code in kvm_handle_page_fault().
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20220311070346.45023-2-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It isn't OK to cache the dirty status of a page in internal structures
for an indefinite period of time.
Any time a vCPU exits the run loop to userspace might be its last; the
VMM might do its final check of the dirty log, flush the last remaining
dirty pages to the destination and complete a live migration. If we
have internal 'dirty' state which doesn't get flushed until the vCPU
is finally destroyed on the source after migration is complete, then
we have lost data because that will escape the final copy.
This problem already exists with the use of kvm_vcpu_unmap() to mark
pages dirty in e.g. VMX nesting.
Note that the actual Linux MM already considers the page to be dirty
since we have a writeable mapping of it. This is just about the KVM
dirty logging.
For the nesting-style use cases (KVM_GUEST_USES_PFN) we will need to
track which gfn_to_pfn_caches have been used and explicitly mark the
corresponding pages dirty before returning to userspace. But we would
have needed external tracking of that anyway, rather than walking the
full list of GPCs to find those belonging to this vCPU which are dirty.
So let's rely *solely* on that external tracking, and keep it simple
rather than laying a tempting trap for callers to fall into.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the guest_uses_pa and kernel_map booleans in the PFN cache code
with a unified enum/bitmask. Using explicit names makes it easier to
review and audit call sites.
Opportunistically add a WARN to prevent passing garbage; instantating a
cache without declaring its usage is either buggy or pointless.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include kvm_cache_regs.h to pick up the definition of is_guest_mode(),
which is referenced by nested_svm_virtualize_tpr() in svm.h. Remove
include from svm_onhpyerv.c which was done only because of lack of
include in svm.h.
Fixes: 883b0a91f4 ("KVM: SVM: Move Nested SVM Implementation to nested.c")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20220304161032.2270688-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The third nybble of AMD's event select overlaps with Intel's IN_TX and
IN_TXCP bits. Therefore, we can't use AMD64_RAW_EVENT_MASK on Intel
platforms that support TSX.
Declare a raw_event_mask in the kvm_pmu structure, initialize it in
the vendor-specific pmu_refresh() functions, and use that mask for
PERF_TYPE_RAW configurations in reprogram_gp_counter().
Fixes: 710c476514 ("KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220308012452.3468611-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Re-introduce zapping only leaf SPTEs in kvm_zap_gfn_range() and
kvm_tdp_mmu_unmap_gfn_range(), this time without losing a pending TLB
flush when processing multiple roots (including nested TDP shadow roots).
Dropping the TLB flush resulted in random crashes when running Hyper-V
Server 2019 in a guest with KSM enabled in the host (or any source of
mmu_notifier invalidations, KSM is just the easiest to force).
This effectively revert commits 873dd12217
and fcb93eb6d0, and thus restores commit
cf3e26427c, plus this delta on top:
bool kvm_tdp_mmu_zap_leafs(struct kvm *kvm, int as_id, gfn_t start, gfn_t end,
struct kvm_mmu_page *root;
for_each_tdp_mmu_root_yield_safe(kvm, root, as_id)
- flush = tdp_mmu_zap_leafs(kvm, root, start, end, can_yield, false);
+ flush = tdp_mmu_zap_leafs(kvm, root, start, end, can_yield, flush);
return flush;
}
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220325230348.2587437-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If kvm->arch.tdp_mmu_zap_wq cannot be created, the failure has
to be propagated up to kvm_mmu_init_vm and kvm_arch_init_vm.
kvm_arch_init_vm also has to undo all the initialization, so
group all the MMU initialization code at the beginning and
handle cleaning up of kvm_page_track_init.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull vfs updates from Al Viro:
"Assorted bits and pieces"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aio: drop needless assignment in aio_read()
clean overflow checks in count_mounts() a bit
seq_file: fix NULL pointer arithmetic warning
uml/x86: use x86 load_unaligned_zeropad()
asm/user.h: killed unused macros
constify struct path argument of finish_automount()/do_add_mount()
fs: Remove FIXME comment in generic_write_checks()
- Devicetree support (for testing)
- Various cleanups and fixes: UBD, port_user, uml_mconsole
- Maintainer update
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAmJFwUMWHHJpY2hhcmRA
c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wQqBD/9gLyeiVp2eu1YFVir64IASgVjK
lNdlAfUwfebtEsw65JcfY8K64910ahw6TvkjTT2A+QGeJIYaVwmw69bLXJUvQq31
C7ZDsMHptuNiZrHDL9SoA0DfwqRdJx3tgGzDnSkhX+2T7Zs5n1nLRMBmn/NJV9Qy
CmxG9fLH1VsU0p6RI76WST3GPLOqWa3jCeHK1vMGZNXI+eo5prHc59lkOcT7lEy7
M4vJRaAV6pCDDYMQdDOYr1PDEeG7/h49EqdKylkOhonDyYB649rL6Lc9nRBvSts3
NXX/qYy1Sj1AlOSR5IOon6QCyk1hap9kr85QoCtz3VMabD/yLlBovZzLOLaF+0S6
dQWgKg806g8QYQGxN03Ph0Pb5cA6hAjr8nVmAuICJDWgmY6Oo74pEvhI8toofFzk
NJzwa6G99xNhfggeTcGdG0ddQDT8N3enKspDPkzpN127GzU5cgvI1Z8wnZXB7JDM
zLMCxzwehocCSrFlh9aQDFK1XJfEWuP66xEPl5cX46//IMKqsrXEOjNlCTRUmA5F
OhU4qqb01OW3K4HPaAkBcGPZ0HhFn6JREUFyNW07dg6s73IWzf0CaNKeYJS7abln
tdvfPg3OPNXCjHd3aCW22EzuB9R/K8BNMkva3QQZxtUa+tOjBdBd9JBJ+vHGA1MN
7/k60wl1dt8/N9yHFg==
=YsK8
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- Devicetree support (for testing)
- Various cleanups and fixes: UBD, port_user, uml_mconsole
- Maintainer update
* tag 'for-linus-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: run_helper: Write error message to kernel log on exec failure on host
um: port_user: Improve error handling when port-helper is not found
um: port_user: Allow setting path to port-helper using UML_PORT_HELPER envvar
um: port_user: Search for in.telnetd in PATH
um: clang: Strip out -mno-global-merge from USER_CFLAGS
docs: UML: Mention telnetd for port channel
um: Remove unused timeval_to_ns() function
um: Fix uml_mconsole stop/go
um: Cleanup syscall_handler_t definition/cast, fix warning
uml: net: vector: fix const issue
um: Fix WRITE_ZEROES in the UBD Driver
um: Migrate vector drivers to NAPI
um: Fix order of dtb unflatten/early init
um: fix and optimize xor select template for CONFIG64 and timetravel mode
um: Document dtb command line option
lib/logic_iomem: correct fallback config references
um: Remove duplicated include in syscalls_64.c
MAINTAINERS: Update UserModeLinux entry
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
-----BEGIN PGP SIGNATURE-----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=84rW
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
Features:
- kprobes: rethook: x86: replace kretprobe trampoline with rethook
Current release - regressions:
- sfc: avoid null-deref on systems without NUMA awareness
in the new queue sizing code
Current release - new code bugs:
- vxlan: do not feed vxlan_vnifilter_dump_dev with non-vxlan devices
- eth: lan966x: fix null-deref on PHY pointer in timestamp ioctl
when interface is down
Previous releases - always broken:
- openvswitch: correct neighbor discovery target mask field
in the flow dump
- wireguard: ignore v6 endpoints when ipv6 is disabled and fix a leak
- rxrpc: fix call timer start racing with call destruction
- rxrpc: fix null-deref when security type is rxrpc_no_security
- can: fix UAF bugs around echo skbs in multiple drivers
Misc:
- docs: move netdev-FAQ to the "process" section of the documentation
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5Bvy
-----END PGP SIGNATURE-----
Merge tag 'net-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking updates from Jakub Kicinski:
"Networking fixes and rethook patches.
Features:
- kprobes: rethook: x86: replace kretprobe trampoline with rethook
Current release - regressions:
- sfc: avoid null-deref on systems without NUMA awareness in the new
queue sizing code
Current release - new code bugs:
- vxlan: do not feed vxlan_vnifilter_dump_dev with non-vxlan devices
- eth: lan966x: fix null-deref on PHY pointer in timestamp ioctl when
interface is down
Previous releases - always broken:
- openvswitch: correct neighbor discovery target mask field in the
flow dump
- wireguard: ignore v6 endpoints when ipv6 is disabled and fix a leak
- rxrpc: fix call timer start racing with call destruction
- rxrpc: fix null-deref when security type is rxrpc_no_security
- can: fix UAF bugs around echo skbs in multiple drivers
Misc:
- docs: move netdev-FAQ to the 'process' section of the
documentation"
* tag 'net-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
vxlan: do not feed vxlan_vnifilter_dump_dev with non vxlan devices
openvswitch: Add recirc_id to recirc warning
rxrpc: fix some null-ptr-deref bugs in server_key.c
rxrpc: Fix call timer start racing with call destruction
net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardware
net: hns3: fix the concurrency between functions reading debugfs
docs: netdev: move the netdev-FAQ to the process pages
docs: netdev: broaden the new vs old code formatting guidelines
docs: netdev: call out the merge window in tag checking
docs: netdev: add missing back ticks
docs: netdev: make the testing requirement more stringent
docs: netdev: add a question about re-posting frequency
docs: netdev: rephrase the 'should I update patchwork' question
docs: netdev: rephrase the 'Under review' question
docs: netdev: shorten the name and mention msgid for patch status
docs: netdev: note that RFC postings are allowed any time
docs: netdev: turn the net-next closed into a Warning
docs: netdev: move the patch marking section up
docs: netdev: minor reword
docs: netdev: replace references to old archives
...
- Missing Kconfig dependency on arm that leads to boot failure.
- x86 SLS fixes.
- Reference leak in the stm32 driver.
-----BEGIN PGP SIGNATURE-----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=qKtj
-----END PGP SIGNATURE-----
Merge tag 'v5.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Missing Kconfig dependency on arm that leads to boot failure
- x86 SLS fixes
- Reference leak in the stm32 driver
* tag 'v5.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/sm3 - Fixup SLS
crypto: x86/poly1305 - Fixup SLS
crypto: x86/chacha20 - Avoid spurious jumps to other functions
crypto: stm32 - fix reference leak in stm32_crc_remove
crypto: arm/aes-neonbs-cbc - Select generic cbc and aes
Revert commit bf9ad37dc8. It needs to be better encapsulated and
generalized.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
$(shell ...) expands to empty. There is no need to assign it to _dummy.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Use the offset calculation to do the size calculation which avoids yet
another series of CPUID instructions for each invocation.
[ Fix the FP/SSE only case which missed to take the xstate
header into account, as
Reported-by: kernel test robot <oliver.sang@intel.com> ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/87o81pgbp2.ffs@tglx
The size calculation in __xstate_request_perm() fails to take supervisor
states into account because the permission bitmap is only relevant for user
states.
Up to 5.17 this does not matter because there are no supervisor states
supported, but the (re-)enabling of ENQCMD makes them available.
Fixes: 7c1ef59145 ("x86/cpufeatures: Re-enable ENQCMD")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324134623.681768598@linutronix.de
So far the cached fixed compacted offsets worked, but with (re-)enabling
of ENQCMD this does no longer work with KVM fpstate.
KVM does not have supervisor features enabled for the guest FPU, which
means that KVM has then a different XSAVE area layout than the host FPU
state. This in turn breaks the copy from/to UABI functions when invoked for
a guest state.
Remove the pre-calculated compacted offsets and calculate the offset
of each component at runtime based on the XCOMP_BV field in the XSAVE
header.
The runtime overhead is not interesting because these copy from/to UABI
functions are not used in critical fast paths. KVM uses them to save and
restore FPU state during migration. The host uses them for ptrace and for
the slow path of 32bit signal handling.
Fixes: 7c1ef59145 ("x86/cpufeatures: Re-enable ENQCMD")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324134623.627636809@linutronix.de
In preparation for runtime calculation of XSAVE offsets cache the feature
flags for each XSTATE component during feature enumeration via CPUID(0xD).
EDX has two relevant bits:
0 Supervisor component
1 Feature storage must be 64 byte aligned
These bits are currently only evaluated during init, but the alignment bit
must be cached to make runtime calculation of XSAVE offsets efficient.
Cache the full EDX content and use it for the existing alignment and
supervisor checks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324134623.573656209@linutronix.de
Reading XSTATE feature information from CPUID over and over does not make
sense. The information has to be cached anyway, so it can be done early.
Prepare for runtime calculation of XSTATE offsets and allow
consolidation of the size calculation functions in a later step.
Rename the function while at it as it does not setup any features.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324134623.519411939@linutronix.de
This missed the big asm update due to being merged through the crypto
tree.
Fixes: f94909ceb1 ("x86: Prepare asm files for straight-line-speculation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
fpu_copy_uabi_to_guest_fpstate() initializes the XCOMP_BV field in the
XSAVE header. That's a leftover from the old KVM FPU buffer handling code.
Since
d69c1382e1 ("x86/kvm: Convert FPU handling to a single swap buffer")
KVM uses the FPU core allocation code, which initializes the XCOMP_BV
field already.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324134623.408932232@linutronix.de
Setting non-zero values to SYNIC/STIMER MSRs activates certain features,
this should not happen when KVM_CAP_HYPERV_SYNIC{,2} was not activated.
Note, it would've been better to forbid writing anything to SYNIC/STIMER
MSRs, including zeroes, however, at least QEMU tries clearing
HV_X64_MSR_STIMER0_CONFIG without SynIC. HV_X64_MSR_EOM MSR is somewhat
'special' as writing zero there triggers an action, this also should not
happen when SynIC wasn't activated.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220325132140.25650-4-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When kvm_irq_delivery_to_apic_fast() is called with APIC_DEST_SELF
shorthand, 'src' must not be NULL. Crash the VM with KVM_BUG_ON()
instead of crashing the host.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220325132140.25650-3-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When KVM_CAP_HYPERV_SYNIC{,2} is activated, KVM already checks for
irqchip_in_kernel() so normally SynIC irqs should never be set. It is,
however, possible for a misbehaving VMM to write to SYNIC/STIMER MSRs
causing erroneous behavior.
The immediate issue being fixed is that kvm_irq_delivery_to_apic()
(kvm_irq_delivery_to_apic_fast()) crashes when called with
'irq.shorthand = APIC_DEST_SELF' and 'src == NULL'.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220325132140.25650-2-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clang warns:
arch/x86/kvm/cpuid.c:739:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
default:
^
arch/x86/kvm/cpuid.c:739:2: note: insert 'break;' to avoid fall-through
default:
^
break;
1 error generated.
Clang is a little more pedantic than GCC, which does not warn when
falling through to a case that is just break or return. Clang's version
is more in line with the kernel's own stance in deprecated.rst, which
states that all switch/case blocks must end in either break,
fallthrough, continue, goto, or return. Add the missing break to silence
the warning.
Fixes: f144c49e8c ("KVM: x86: synthesize CPUID leaf 0x80000021h if useful")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Message-Id: <20220322152906.112164-1-nathan@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
