Currently the MPLSoUDP encap builds the MPLS header using encap action
information (tunnel id, ttl and tos) instead of the MPLS action
information (label, ttl, tc and bos) which is wrong.
Fix by storing the MPLS action information during the flow action
parse and later using it to create the encap MPLS header.
Fixes: f828ca6a2f ("net/mlx5e: Add support for hw encapsulation of MPLS over UDP")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Fec counters support is checked via the PCAM feature_cap_mask,
bit 0: PPCNT_counter_group_Phy_statistical_counter_group.
Add feature check to avoid faulty behavior.
Fixes: 0a1498ebfa ("net/mlx5e: Expose FEC counters via ethtool")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Offload of ct clear action is just resetting the reg_c register.
It's done by allocating modify hdr resources which is limited.
Doing it multiple times is redundant and wasting modify hdr resources
and if resources depleted the driver will fail offloading the rule.
Ignore redundant ct clear actions after the first one.
Fixes: 806401c20a ("net/mlx5e: CT, Fix multiple allocations and memleak of mod acts")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Such rules are redundant but allowed and passed to the driver.
The driver does not support offloading such rules so return an error.
Fixes: 03a9d11e6e ("net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloads")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This kind of action is not supported by firmware and generates a
syndrome.
kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3)
Fixes: d7e75a325c ("net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
For RX TLS device-offloaded packets, the HW spec guarantees checksum
validation for the offloaded packets, but does not define whether the
CQE.checksum field matches the original packet (ciphertext) or
the decrypted one (plaintext). This latitude allows architetctural
improvements between generations of chips, resulting in different decisions
regarding the value type of CQE.checksum.
Hence, for these packets, the device driver should not make use of this CQE
field. Here we block CHECKSUM_COMPLETE usage for RX TLS device-offloaded
packets, and use CHECKSUM_UNNECESSARY instead.
Value of the packet's tcp_hdr.csum is not modified by the HW, and it always
matches the original ciphertext.
Fixes: 1182f36593 ("net/mlx5e: kTLS, Add kTLS RX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The ioctl EEPROM query wrongly returns success on read failures, fix
that by returning the appropriate error code.
Fixes: bb64143eee ("net/mlx5e: Add ethtool support for dump module EEPROM")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add missing call to up_write_ref_node() which releases the semaphore
in case the FTE doesn't have destinations, such in drop rule case.
Fixes: 465e7baab6 ("net/mlx5: Fix deletion of duplicate rules")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Only prio 1 is supported if firmware doesn't support ignore flow
level for nic mode. The offending commit removed the check wrongly.
Add it back.
Fixes: 9a99c8f125 ("net/mlx5e: E-Switch, Offload all chain 0 priorities when modify header and forward action is not supported")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Match metadata support check returns false for ecpf device.
However, this support does exist for ecpf and therefore this
limitation should be removed to allow feature such as stacked
devices and internal port offloaded to be supported.
Fixes: 92ab1eb392 ("net/mlx5: E-Switch, Enable vport metadata matching if firmware supports it")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, log_max_qp value is dependent on what FW reports as its max capability.
In reality, due to a bug, some FWs report a value greater than 17, even though they
don't support log_max_qp > 17.
This FW issue led the driver to exhaust memory on startup.
Thus, log_max_qp value is set to be no more than 17 regardless
of what FW reports, as it was before the cited commit.
Fixes: f79a609ea6 ("net/mlx5: Update log_max_qp value to FW max capability")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When deciding whether to start syncing and actually free all the "hot"
ICM chunks, we need to consider the type of the ICM chunks that we're
dealing with. For instance, the amount of available ICM for MODIFY_ACTION
is significantly lower than the usual STE ICM, so the threshold should
account for that - otherwise we can deplete MODIFY_ACTION memory just by
creating and deleting the same modify header action in a continuous loop.
This patch replaces the hard-coded threshold with a dynamic value.
Fixes: 1c58651412 ("net/mlx5: DR, ICM memory pools sync optimization")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently SMFS allows adding rule with matching on src/dst IP w/o matching
on full ethertype or ip_version, which is not supported by HW.
This patch fixes this issue and adds the check as it is done in DMFS.
Fixes: 26d688e33f ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When adding a rule with 32 destinations, we hit the following out-of-band
access issue:
BUG: KASAN: slab-out-of-bounds in mlx5_cmd_dr_create_fte+0x18ee/0x1e70
This patch fixes the issue by both increasing the allocated buffers to
accommodate for the needed actions and by checking the number of actions
to prevent this issue when a rule with too many actions is provided.
Fixes: 1ffd498901 ("net/mlx5: DR, Increase supported num of actions to 32")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
During rule insertion on each ICM memory chunk we also allocate shadow memory
used for management. This includes the hw_ste, dr_ste and miss list per entry.
Since the scale of these allocations is large we noticed a performance hiccup
that happens once malloc and free are stressed.
In extreme usecases when ~1M chunks are freed at once, it might take up to 40
seconds to complete this, up to the point the kernel sees this as self-detected
stall on CPU:
rcu: INFO: rcu_sched self-detected stall on CPU
To resolve this we will increase the reuse of shadow memory.
Doing this we see that a time in the aforementioned usecase dropped from ~40
seconds to ~8-10 seconds.
Fixes: 29cf8febd1 ("net/mlx5: DR, ICM pool memory allocator")
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add the upcoming BlueField-4 and ConnectX-8 device IDs.
Fixes: 2e9d3e83ab ("net/mlx5: Update the list of the PCI supported devices")
Signed-off-by: Meir Lichtinger <meirl@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Workstation application ANSA/META v21.1.4 get this error dmesg when
running CI test suite provided by ANSA/META:
[drm:amdgpu_gem_va_ioctl [amdgpu]] *ERROR* Couldn't update BO_VA (-16)
This is caused by:
1. create a 256MB buffer in invisible VRAM
2. CPU map the buffer and access it causes vm_fault and try to move
it to visible VRAM
3. force visible VRAM space and traverse all VRAM bos to check if
evicting this bo is valuable
4. when checking a VM bo (in invisible VRAM), amdgpu_vm_evictable()
will set amdgpu_vm->evicting, but latter due to not in visible
VRAM, won't really evict it so not add it to amdgpu_vm->evicted
5. before next CS to clear the amdgpu_vm->evicting, user VM ops
ioctl will pass amdgpu_vm_ready() (check amdgpu_vm->evicted)
but fail in amdgpu_vm_bo_update_mapping() (check
amdgpu_vm->evicting) and get this error log
This error won't affect functionality as next CS will finish the
waiting VM ops. But we'd better clear the error log by checking
the amdgpu_vm->evicting flag in amdgpu_vm_ready() to stop calling
amdgpu_vm_bo_update_mapping() later.
Another reason is amdgpu_vm->evicted list holds all BOs (both
user buffer and page table), but only page table BOs' eviction
prevent VM ops. amdgpu_vm->evicting flag is set only for page
table BOs, so we should use evicting flag instead of evicted list
in amdgpu_vm_ready().
The side effect of this change is: previously blocked VM op (user
buffer in "evicted" list but no page table in it) gets done
immediately.
v2: update commit comments.
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Qiang Yu <qiang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
vkms leverages common amdgpu framebuffer creation, and
also as it does not support FB modifier, there is no need
to check tiling flags when initing framebuffer when virtual
display is enabled.
This can fix below calltrace:
amdgpu 0000:00:08.0: GFX9+ requires FB check based on format modifier
WARNING: CPU: 0 PID: 1023 at drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:1150 amdgpu_display_framebuffer_init+0x8e7/0xb40 [amdgpu]
v2: check adev->enable_virtual_display instead as vkms can be
enabled in bare metal as well.
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4046afcebf.
No need to support modifier in virtual kms, otherwise, in SRIOV
mode, when lanuching X server, set crtc will fail due to mismatch
between primary plane modifier and framebuffer modifier.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GPU reset function of raven2 is not maintained or tested, so it should be
very unstable.
Now the amdgpu_asic_reset function is added to amdgpu_pmops_suspend, which
causes the S3 test of raven2 to fail, so the asic_reset of raven2 is ignored
here.
Fixes: daf8de0874 ("drm/amdgpu: always reset the asic in suspend (v2)")
Signed-off-by: Chen Gong <curry.gong@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Found when running igt@kms_atomic.
Userspace attempts to do a TEST_COMMIT when 0 streams which calls
dc_remove_stream_from_ctx. This in turn calls link_enc_unassign
which ends up modifying stream->link = NULL directly, causing the
global link_enc to be removed preventing further link activity
and future link validation from passing.
[How]
We take care of link_enc unassignment at the start of
link_enc_cfg_link_encs_assign so this call is no longer necessary.
Fixes global state from being modified while unlocked.
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
We are racing the registering of .to_irq when probing the
i2c driver. This results in random failure of touchscreen
devices.
Following explains the race condition better.
[gpio driver] gpio driver registers gpio chip
[gpio consumer] gpio is acquired
[gpio consumer] gpiod_to_irq() fails with -ENXIO
[gpio driver] gpio driver registers irqchip
gpiod_to_irq works at this point, but -ENXIO is fatal
We could see the following errors in dmesg logs when gc->to_irq is NULL
[2.101857] i2c_hid i2c-FTS3528:00: HID over i2c has not been provided an Int IRQ
[2.101953] i2c_hid: probe of i2c-FTS3528:00 failed with error -22
To avoid this situation, defer probing until to_irq is registered.
Returning -EPROBE_DEFER would be the first step towards avoiding
the failure of devices due to the race in registration of .to_irq.
Final solution to this issue would be to avoid using gc irq members
until they are fully initialized.
This issue has been reported many times in past and people have been
using workarounds like changing the pinctrl_amd to built-in instead
of loading it as a module or by adding a softdep for pinctrl_amd into
the config file.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209413
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Two patches which fix a few bugs in the unalignment handlers. The fldd
and fstd instructions weren't handled at all on 32-bit kernels, the stw
instruction didn't checked for fault errors and the fldw_l and ldw_m
were handled wrongly as integer vs. floating point instructions.
Both patches are tagged for stable series.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYhZtYAAKCRD3ErUQojoP
X95qAP4umgbso0RkZrxClYVCON6J/Ndo3PHEe3B992/Jv+R7ZAEA2O5ZOs7nUjdv
rN27wpJU/BBhbKBqs3rYCw4UgQ2zTQI=
=H3yW
-----END PGP SIGNATURE-----
Merge tag 'for-5.17/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc unaligned handler fixes from Helge Deller:
"Two patches which fix a few bugs in the unalignment handlers.
The fldd and fstd instructions weren't handled at all on 32-bit
kernels, the stw instruction didn't check for fault errors and the
fldw_l and ldw_m were handled wrongly as integer vs floating point
instructions.
Both patches are tagged for stable series"
* tag 'for-5.17/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/unaligned: Fix ldw() and stw() unalignment handlers
parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel
Fix two old bugs and one new bug in hwmon subsystem.
- In pmbus core, clear pmbus fault/warning status bits after read
to follow PMBus standard
- In hwmon core, handle failure to register sensor with thermal
zone correctly
- In ntc_thermal driver, use valid thermistor names for Samsung
thermistors
-----BEGIN PGP SIGNATURE-----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=hqZA
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fix two old bugs and one new bug in the hwmon subsystem:
- In pmbus core, clear pmbus fault/warning status bits after read to
follow PMBus standard
- In hwmon core, handle failure to register sensor with thermal zone
correctly
- In ntc_thermal driver, use valid thermistor names for Samsung
thermistors"
* tag 'hwmon-for-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus) Clear pmbus fault/warning bits after read
hwmon: Handle failure to register sensor with thermal zone correctly
hwmon: (ntc_thermistor) Underscore Samsung thermistor
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEjUuTAak14xi+SF7M4CHKc/GJqRAFAmIV/fQACgkQ4CHKc/GJ
qRBhaAgAoz81fjhlkcCaHdgxVTEx6L93iJQJiZWoE3gTKk2jruun3sIYmPSOiY+b
bWR1datDnvaS/Xv04rZ6pm6XPjCT+LmrOQCOlZMjptc6HKoKuDZTvcQ0u5CYOfQS
I9ZRtPaHjSmhntS8BErxGes5+PF1hz/q2rGuODt4/DQCNPZNdHXMdym9w4Z4xHXm
TuH2VXzv5JXhYlUEDz2HP8LXmbvxA9rGaMgngpX92pCL8uTLqANoZCT+zHEj3cKw
db6/A8S7Y4PsfF0JphNup+wcsWj+yfIrfAQwnTgNXR4hlhbUxOHTJqXlQGK/NW7C
tg2nXxQQn14MwPlkatdxFYzg1TbMYg==
=U6Fu
-----END PGP SIGNATURE-----
Merge tag 'slab-for-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Build fix (workaround) for clang.
- Fix a /proc/kcore based slabinfo script broken by struct slab changes
in 5.17-rc1.
* tag 'slab-for-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
tools/cgroup/slabinfo: update to work with struct slab
slab: remove __alloc_size attribute from __kmalloc_track_caller
There are enough VBIOS escapes without the proper workaround that some
users still hit this. Microsoft never productized ATS on Windows so OEM
platforms that were Windows-only didn't always validate ATS.
The advantages of ATS are not worth it compared to the potential
instabilities on harvested boards. Disable ATS on all Navi10 and Navi14
boards.
Symptoms include:
amdgpu 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0007 address=0xffffc02000 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=07:00.0 domain=0x0007 address=0xffffc02000 flags=0x0000]
[drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring sdma0 timeout, signaled seq=6047, emitted seq=6049
amdgpu 0000:07:00.0: amdgpu: GPU reset begin!
amdgpu 0000:07:00.0: amdgpu: GPU reset succeeded, trying to resume
amdgpu 0000:07:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring sdma0 test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <sdma_v4_0> failed -110
amdgpu 0000:07:00.0: amdgpu: GPU reset(1) failed
Related commits:
e8946a53e2 ("PCI: Mark AMD Navi14 GPU ATS as broken")
a2da5d8cc0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms")
45beb31d3a ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken")
5e89cd303e ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken")
d28ca864c4 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken")
9b44b0b09d ("PCI: Mark AMD Stoney GPU ATS as broken")
[bhelgaas: add symptoms and related commits]
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1760
Link: https://lore.kernel.org/r/20220222160801.841643-1-alexander.deucher@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Fix 3 bugs:
a) emulate_stw() doesn't return the error code value, so faulting
instructions are not reported and aborted.
b) Tell emulate_ldw() to handle fldw_l as floating point instruction
c) Tell emulate_ldw() to handle ldw_m as integer instruction
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Usually the kernel provides fixup routines to emulate the fldd and fstd
floating-point instructions if they load or store 8-byte from/to a not
natuarally aligned memory location.
On a 32-bit kernel I noticed that those unaligned handlers didn't worked and
instead the application got a SEGV.
While checking the code I found two problems:
First, the OPCODE_FLDD_L and OPCODE_FSTD_L cases were ifdef'ed out by the
CONFIG_PA20 option, and as such those weren't built on a pure 32-bit kernel.
This is now fixed by moving the CONFIG_PA20 #ifdef to prevent the compilation
of OPCODE_LDD_L and OPCODE_FSTD_L only, and handling the fldd and fstd
instructions.
The second problem are two bugs in the 32-bit inline assembly code, where the
wrong registers where used. The calculation of the natural alignment used %2
(vall) instead of %3 (ior), and the first word was stored back to address %1
(valh) instead of %3 (ior).
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Although we have btrfs_requeue_inode_defrag(), for autodefrag we are
still just exhausting all inode_defrag items in the tree.
This means, it doesn't make much difference to requeue an inode_defrag,
other than scan the inode from the beginning till its end.
Change the behaviour to always scan from offset 0 of an inode, and till
the end.
By this we get the following benefit:
- Straight-forward code
- No more re-queue related check
- Fewer members in inode_defrag
We still keep the same btrfs_get_fs_root() and btrfs_iget() check for
each loop, and added extra should_auto_defrag() check per-loop.
Note: the patch needs to be backported and is intentionally written
to minimize the diff size, code will be cleaned up later.
CC: stable@vger.kernel.org # 5.16
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For extent maps, if they are not compressed extents and are adjacent by
logical addresses and file offsets, they can be merged into one larger
extent map.
Such merged extent map will have the higher generation of all the
original ones.
But this brings a problem for autodefrag, as it relies on accurate
extent_map::generation to determine if one extent should be defragged.
For merged extent maps, their higher generation can mark some older
extents to be defragged while the original extent map doesn't meet the
minimal generation threshold.
Thus this will cause extra IO.
So solve the problem, here we introduce a new flag, EXTENT_FLAG_MERGED,
to indicate if the extent map is merged from one or more ems.
And for autodefrag, if we find a merged extent map, and its generation
meets the generation requirement, we just don't use this one, and go
back to defrag_get_extent() to read extent maps from subvolume trees.
This could cause more read IO, but should result less defrag data write,
so in the long run it should be a win for autodefrag.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For defrag, we don't really want to use btrfs_get_extent() to iterate
all extent maps of an inode.
The reasons are:
- btrfs_get_extent() can merge extent maps
And the result em has the higher generation of the two, causing defrag
to mark unnecessary part of such merged large extent map.
This in fact can result extra IO for autodefrag in v5.16+ kernels.
However this patch is not going to completely solve the problem, as
one can still using read() to trigger extent map reading, and got
them merged.
The completely solution for the extent map merging generation problem
will come as an standalone fix.
- btrfs_get_extent() caches the extent map result
Normally it's fine, but for defrag the target range may not get
another read/write for a long long time.
Such cache would only increase the memory usage.
- btrfs_get_extent() doesn't skip older extent map
Unlike the old find_new_extent() which uses btrfs_search_forward() to
skip the older subtree, thus it will pick up unnecessary extent maps.
This patch will fix the regression by introducing defrag_get_extent() to
replace the btrfs_get_extent() call.
This helper will:
- Not cache the file extent we found
It will search the file extent and manually convert it to em.
- Use btrfs_search_forward() to skip entire ranges which is modified in
the past
This should reduce the IO for autodefrag.
Reported-by: Filipe Manana <fdmanana@suse.com>
Fixes: 7b508037d4 ("btrfs: defrag: use defrag_one_cluster() to implement btrfs_defrag_file()")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
From the very beginning of btrfs defrag, there is a check to reject
extents which meet both conditions:
- Physically adjacent
We may want to defrag physically adjacent extents to reduce the number
of extents or the size of subvolume tree.
- Larger than 128K
This may be there for compressed extents, but unfortunately 128K is
exactly the max capacity for compressed extents.
And the check is > 128K, thus it never rejects compressed extents.
Furthermore, the compressed extent capacity bug is fixed by previous
patch, there is no reason for that check anymore.
The original check has a very small ranges to reject (the target extent
size is > 128K, and default extent threshold is 256K), and for
compressed extent it doesn't work at all.
So it's better just to remove the rejection, and allow us to defrag
physically adjacent extents.
CC: stable@vger.kernel.org # 5.16
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
For compressed extents, defrag ioctl will always try to defrag any
compressed extents, wasting not only IO but also CPU time to
compress/decompress:
mkfs.btrfs -f $DEV
mount -o compress $DEV $MNT
xfs_io -f -c "pwrite -S 0xab 0 128K" $MNT/foobar
sync
xfs_io -f -c "pwrite -S 0xcd 128K 128K" $MNT/foobar
sync
echo "=== before ==="
xfs_io -c "fiemap -v" $MNT/foobar
btrfs filesystem defrag $MNT/foobar
sync
echo "=== after ==="
xfs_io -c "fiemap -v" $MNT/foobar
Then it shows the 2 128K extents just get COW for no extra benefit, with
extra IO/CPU spent:
=== before ===
/mnt/btrfs/file1:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..255]: 26624..26879 256 0x8
1: [256..511]: 26632..26887 256 0x9
=== after ===
/mnt/btrfs/file1:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..255]: 26640..26895 256 0x8
1: [256..511]: 26648..26903 256 0x9
This affects not only v5.16 (after the defrag rework), but also v5.15
(before the defrag rework).
[CAUSE]
From the very beginning, btrfs defrag never checks if one extent is
already at its max capacity (128K for compressed extents, 128M
otherwise).
And the default extent size threshold is 256K, which is already beyond
the compressed extent max size.
This means, by default btrfs defrag ioctl will mark all compressed
extent which is not adjacent to a hole/preallocated range for defrag.
[FIX]
Introduce a helper to grab the maximum extent size, and then in
defrag_collect_targets() and defrag_check_next_extent(), reject extents
which are already at their max capacity.
Reported-by: Filipe Manana <fdmanana@suse.com>
CC: stable@vger.kernel.org # 5.16
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
With older kernels (before v5.16), btrfs will defrag preallocated extents.
While with newer kernels (v5.16 and newer) btrfs will not defrag
preallocated extents, but it will defrag the extent just before the
preallocated extent, even it's just a single sector.
This can be exposed by the following small script:
mkfs.btrfs -f $dev > /dev/null
mount $dev $mnt
xfs_io -f -c "pwrite 0 4k" -c sync -c "falloc 4k 16K" $mnt/file
xfs_io -c "fiemap -v" $mnt/file
btrfs fi defrag $mnt/file
sync
xfs_io -c "fiemap -v" $mnt/file
The output looks like this on older kernels:
/mnt/btrfs/file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 26624..26631 8 0x0
1: [8..39]: 26632..26663 32 0x801
/mnt/btrfs/file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..39]: 26664..26703 40 0x1
Which defrags the single sector along with the preallocated extent, and
replace them with an regular extent into a new location (caused by data
COW).
This wastes most of the data IO just for the preallocated range.
On the other hand, v5.16 is slightly better:
/mnt/btrfs/file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 26624..26631 8 0x0
1: [8..39]: 26632..26663 32 0x801
/mnt/btrfs/file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 26664..26671 8 0x0
1: [8..39]: 26632..26663 32 0x801
The preallocated range is not defragged, but the sector before it still
gets defragged, which has no need for it.
[CAUSE]
One of the function reused by the old and new behavior is
defrag_check_next_extent(), it will determine if we should defrag
current extent by checking the next one.
It only checks if the next extent is a hole or inlined, but it doesn't
check if it's preallocated.
On the other hand, out of the function, both old and new kernel will
reject preallocated extents.
Such inconsistent behavior causes above behavior.
[FIX]
- Also check if next extent is preallocated
If so, don't defrag current extent.
- Add comments for each branch why we reject the extent
This will reduce the IO caused by defrag ioctl and autodefrag.
CC: stable@vger.kernel.org # 5.16
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As per NVMe/TCP specification (revision 1.0a, section 3.6.2.3)
Maximum Host to Controller Data length (MAXH2CDATA): Specifies the
maximum number of PDU-Data bytes per H2CData PDU in bytes. This value
is a multiple of dwords and should be no less than 4,096.
Current code sets H2CData PDU data_length to r2t_length,
it does not check MAXH2CDATA value. Fix this by setting H2CData PDU
data_length to min(req->h2cdata_left, queue->maxh2cdata).
Also validate MAXH2CDATA value returned by target in ICResp PDU,
if it is not a multiple of dword or if it is less than 4096 return
-EINVAL from nvme_tcp_init_connection().
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commit e7d65803e2 ("nvme-multipath: revalidate paths during rescan")
introduced the NVME_NS_READY flag, which nvme_path_is_disabled() uses
to check if a path can be used or not. We also need to set this flag
for devices that fail the ZNS feature validation and which are available
through passthrough devices only to that they can be used in multipathing
setups.
Fixes: e7d65803e2 ("nvme-multipath: revalidate paths during rescan")
Reported-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Kanchan Joshi <joshi.k@samsung.com>
When a fabrics controller claims to support an invalidate metadata
configuration we already warn and disable metadata support. No need to
also return an error during revalidation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Kanchan Joshi <joshi.k@samsung.com>
In order to fill the drm_display_info structure each time an EDID is
read, the code currently will call drm_add_display_info with the parsed
EDID.
drm_add_display_info will then call drm_reset_display_info to reset all
the fields to 0, and then set them to the proper value depending on the
EDID.
In the color_formats case, we will thus report that we don't support any
color format, and then fill it back with RGB444 plus the additional
formats described in the EDID Feature Support byte.
However, since that byte only contains format-related bits since the 1.4
specification, this doesn't happen if the EDID is following an earlier
specification. In turn, it means that for one of these EDID, we end up
with color_formats set to 0.
The EDID 1.3 specification never really specifies what it means by RGB
exactly, but since both HDMI and DVI will use RGB444, it's fairly safe
to assume it's supposed to be RGB444.
Let's move the addition of RGB444 to color_formats earlier in
drm_add_display_info() so that it's always set for a digital display.
Fixes: da05a5a71a ("drm: parse color format support for digital displays")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203115416.1137308-1-maxime@cerno.tech
Heyi Guo says:
====================
drivers/net/ftgmac100: fix occasional DHCP failure
This patch set is to fix the issues discussed in the mail thread:
https://lore.kernel.org/netdev/51f5b7a7-330f-6b3c-253d-10e45cdb6805@linux.alibaba.com/
and follows the advice from Andrew Lunn.
The first 2 patches refactors the code to enable adjust_link calling reset
function directly.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
DHCP failures were observed with systemd 247.6. The issue could be
reproduced by rebooting Aspeed 2600 and then running ifconfig ethX
down/up.
It is caused by below procedures in the driver:
1. ftgmac100_open() enables net interface and call phy_start()
2. When PHY is link up, it calls netif_carrier_on() and then
adjust_link callback
3. ftgmac100_adjust_link() will schedule the reset task
4. ftgmac100_reset_task() will then reset the MAC in another schedule
After step 2, systemd will be notified to send DHCP discover packet,
while the packet might be corrupted by MAC reset operation in step 4.
Call ftgmac100_reset() directly instead of scheduling task to fix the
issue.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is to prepare for ftgmac100_adjust_link() to call
ftgmac100_reset() directly. Only code places are changed.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is to prepare for ftgmac100_adjust_link() to call reset function
directly, instead of task schedule.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix following coccicheck warning:
./net/sched/act_api.c:277:7-49: WARNING avoid newline at end of message
in NL_SET_ERR_MSG_MOD
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding myself (Alvin Šipraga) as another maintainer for the Realtek DSA
switch drivers. I intend to help Linus out with reviewing and testing
changes to these drivers, particularly the rtl8365mb driver which I
authored and have hardware access to.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
These tests are supposed to check if the loop exited via a break or not.
However the tests are wrong because if we did not exit via a break then
"p" is not a valid pointer. In that case, it's the equivalent of
"if (*(u32 *)sr == *last_key) {". That's going to work most of the time,
but there is a potential for those to be equal.
Fixes: 1593123a6a ("tipc: add name table dump to new netlink api")
Fixes: 1a1a143daf ("tipc: add publication dump to new netlink api")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test is checking if we exited the list via break or not. However
if it did not exit via a break then "node" does not point to a valid
udp_tunnel_nic_shared_node struct. It will work because of the way
the structs are laid out it's the equivalent of
"if (info->shared->udp_tunnel_nic_info != dev)" which will always be
true, but it's not the right way to test.
Fixes: 74cc6d182d ("udp_tunnel: add the ability to share port tables")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vhost_vsock_stop() calls vhost_dev_check_owner() to check the device
ownership. It expects current->mm to be valid.
vhost_vsock_stop() is also called by vhost_vsock_dev_release() when
the user has not done close(), so when we are in do_exit(). In this
case current->mm is invalid and we're releasing the device, so we
should clean it anyway.
Let's check the owner only when vhost_vsock_stop() is called
by an ioctl.
When invoked from release we can not fail so we don't check return
code of vhost_vsock_stop(). We need to stop vsock even if it's not
the owner.
Fixes: 433fc58e6b ("VSOCK: Introduce vhost_vsock.ko")
Cc: stable@vger.kernel.org
Reported-by: syzbot+1e3ea63db39f2b4440e0@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+3140b17cb44a7b174008@syzkaller.appspotmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The DPAUX hardware block exposes an DP AUX interface that provides
access to an AUX bus and the devices on that bus. Use the DP AUX bus
infrastructure that was recently introduced to probe devices on this
bus from DT.
Signed-off-by: Thierry Reding <treding@nvidia.com>
