Commit graph

316 commits

Author SHA1 Message Date
Jens Axboe
edc83d47a9 cciss: fix compile issue
drivers/block/cciss.c: In function ‘cciss_send_reset’:
drivers/block/cciss.c:2515:2: error: implicit declaration of function ‘fill_cmd’
drivers/block/cciss.c: At top level:
drivers/block/cciss.c:2531:12: error: conflicting types for ‘fill_cmd’
drivers/block/cciss.c:2534:1: note: an argument type that has a default promotion can’t match an empty parameter name list declaration
drivers/block/cciss.c:2515:18: note: previous implicit declaration of ‘fill_cmd’ was here
make[1]: *** [drivers/block/cciss.o] Error 1
make: *** [drivers/block/cciss.o] Error 2

Move fill_cmd() to above where it is first used.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:27:00 -06:00
Stephen M. Cameron
8a4ec67bd5 cciss: add cciss_tape_cmds module paramter
This is to allow number of commands reserved for use by SCSI tape drives
and medium changers to be adjusted at driver load time via the kernel
parameter cciss_tape_cmds, with a default value of 6, and a range
of 2 - 16 inclusive.  Previously, the driver limited the number of
commands which could be queued to the SCSI half of the the driver
to only 2.  This is to fix the problem that if you had more than
two tape drives, you couldn't, for example, erase or rewind them all
at the same time.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:59 -06:00
Stephen M. Cameron
063d2cf72a cciss: do not use bit 2 doorbell reset
It causes NMIs which are undesirable at best, unsurvivable at worst.
Prefer the soft reset instead.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:58 -06:00
Stephen M. Cameron
ec52d5f1cb cciss: do not attempt PCI power management reset method if we know it won't work.
Just go straight to the soft-reset method instead.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:57 -06:00
Stephen M. Cameron
93c46c2fa7 cciss: remove superfluous sleeps around reset code
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:56 -06:00
Stephen M. Cameron
5afe278114 cciss: do soft reset if hard reset is broken
on driver load, if reset_devices is set, and the hard reset
attempts fail, try to bring up the controller to the point that
a command can be sent, and send it a soft reset command, then
after the reset undo whatever driver initialization was done to get
it to the point to take a command, and re-do it after the reset.

This is to get kdump to work on all the "non-resettable" controllers
(except 64xx controllers which can't be reset due to the potentially
shared cache module.)

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:56 -06:00
Stephen M. Cameron
bf2e2e6b87 cciss: use new doorbell-bit-5 reset method
The bit-2-doorbell reset method seemed to cause (survivable) NMIs
on some systems and (unsurvivable) IOCK NMIs on some G7 servers.
Firmware guys implemented a new doorbell method to alleviate these
problems triggered by bit 5 of the doorbell register.  We want to
use it if it's available.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:55 -06:00
Stephen M. Cameron
3e28601fdf cciss: increase timeouts for post-reset no-ops
Just to reduce the messages about timeouts that appear.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:54 -06:00
Stephen M. Cameron
59ec86bb98 cciss: clarify messages around reset behavior
When waiting for the board to become "not ready"
don't print a message saying "waiting for board to
become ready" (possibly followed by a message saying
"failed waiting for board to become not ready".  Instead,
it should be "waiting for board to reset" and "failed
waiting for board to reset."

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
"
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:53 -06:00
Stephen M. Cameron
8f71bb829a cciss: get rid of message related magic numbers
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:50 -06:00
Stephen M. Cameron
e363e01436 cciss: fix reply pool and block fetch table memory leaks
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:50 -06:00
Stephen M. Cameron
2b48085f97 cciss: factor out irq request code
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:49 -06:00
Stephen M. Cameron
abf7966e61 cciss: factor out scatterlist allocation functions
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:48 -06:00
Stephen M. Cameron
54dae34320 cciss: factor out command pool allocation functions
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:47 -06:00
Stephen M. Cameron
62710ae1ce cciss: do a better job of detecting controller reset failure
Detect failure of controller reset by noticing if the 32 bytes of
"driver version" we store on the hardware in the config table
fail to get zeroed out.  Previously we noticed if the controller
did not transition to "simple mode", but this did not detect reset
failure if the controller was already in simple mode prior to
the reset attempt (e.g. due to module parameter hpsa_simple_mode=1).

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:46 -06:00
Stephen M. Cameron
6d9a4f9e21 cciss: fix missed command status value CMD_UNABORTABLE
and fix a nearby typo, "do" that should have been "due"

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-12 10:02:30 +01:00
Stephen M. Cameron
fcab1c112a cciss: remove unnecessary casts
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-12 10:02:24 +01:00
Stephen M. Cameron
16011131ce cciss: Mask off error bits of c->busaddr in cmd_special_free when calling pci_free_consistent
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-12 10:02:21 +01:00
Stephen M. Cameron
0498cc2a9e cciss: Inform controller we are using 32-bit tags.
Controller will DMA only 32-bits of the tag per command
on completion if it knows we are only using 32-bit tags.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-12 10:02:16 +01:00
Stephen M. Cameron
4a76504655 cciss: hoist tag masking out of loop
In process_nonindexed_cmd, hoist figuring of masked tag out of loop since
it is the same throughout.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-12 10:02:11 +01:00
Stephen M. Cameron
957c2ec558 cciss: export resettable host attribute
This attribute, requested by Redhat, allows kexec-tools to know
whether the controller can honor the reset_devices kernel parameter
and actually reset the controller.  For kdump to work properly it
is necessary that the reset_devices parameter be honored.  This
attribute enables kexec-tools to warn the user if they attempt to
designate a non-resettable controller as the dump device.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-11 20:06:09 +01:00
Jens Axboe
7eaceaccab block: remove per-queue plugging
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
Stephen M. Cameron
68264e9d67 cciss: make cciss_revalidate not loop through CISS_MAX_LUNS volumes unnecessarily.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-19 08:25:02 -07:00
Linus Torvalds
7b0cb1bdac Merge branch 'for-2.6.38/drivers' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.38/drivers' of git://git.kernel.dk/linux-2.6-block:
  cciss: reinstate proper FIFO order of command queue list
  floppy: replace NO_GEOM macro with a function
2011-01-13 10:50:24 -08:00
Jens Axboe
e6e1ee936d cciss: reinstate proper FIFO order of command queue list
Commit 8a3173de inadvertently changed the ordering when
switching to hlists. Change to regular list heads so we
can use tail list adds, this improves performance.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-10 21:50:33 +01:00
Linus Torvalds
453434cf3f Fix build error in drivers/block/cciss.c
.. caused by a missing semi-colon, introduced in commit 0fc13c8995
("cciss: fix cciss_revalidate panic").

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Thiago Farina <tfransosi@gmail.com>
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-20 21:21:49 -08:00
Stephen M. Cameron
0fc13c8995 cciss: fix cciss_revalidate panic
If you delete a logical drive, and then run BLKRRPART (e.g. via fdisk)
on a logical drive which is "after" the deleted logical drive in the h->drv[]
array, then cciss_revalidate panics because it will access the null pointer
h->drv[x] when x hits the deleted drive.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-17 09:01:37 +01:00
Jens Axboe
bbe425cd9a cciss: fix build for PROC_FS disabled
The recent patch to fix the removal of a non-existing proc
directory introduced this build problem for !CONFIG_PROC_FS:

drivers/block/cciss.c:4929: error: 'proc_cciss' undeclared (first use in this function)

Fix it by moving proc_cciss outside of the CONFIG_PROC_FS scope.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-17 11:56:13 +01:00
Jens Axboe
00e375e7e9 Merge branch 'for-2.6.37/drivers' into for-linus
Conflicts:
	drivers/block/cciss.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-10 14:51:27 +01:00
Jens Axboe
90fdb0b98a cciss: fix proc warning on attempt to remove non-existant directory
Randy reports that he gets the following stack trace when
removing the cciss module:

[  109.164277] Pid: 3463, comm: rmmod Not tainted 2.6.37-rc1 #7
[  109.164280] Call Trace:
[  109.164292]  [<ffffffff8107eb8d>] warn_slowpath_common+0xc6/0xf3
[  109.164299]  [<ffffffff8107ecaa>] warn_slowpath_fmt+0x5b/0x6b
[  109.164307]  [<ffffffff8155175b>] ? _raw_spin_unlock+0x40/0x4b
[  109.164313]  [<ffffffff8123dd1e>] remove_proc_entry+0x156/0x35e
[  109.164320]  [<ffffffff812cd91b>] ? do_raw_spin_unlock+0xff/0x10f
[  109.164327]  [<ffffffff8113823d>] ? trace_hardirqs_on+0x10/0x4a
[  109.164333]  [<ffffffff8155162d>] ? _raw_spin_unlock_irq+0x4c/0x7b
[  109.164339]  [<ffffffff8154d4d1>] ? wait_for_common+0x145/0x15e
[  109.164345]  [<ffffffff81075337>] ? default_wake_function+0x0/0x22
[  109.164357]  [<ffffffffa0615a8f>] cciss_cleanup+0xa9/0xc7 [cciss]
[  109.164365]  [<ffffffff810d3cb0>] sys_delete_module+0x2d6/0x368
[  109.164371]  [<ffffffff8155036b>] ? lockdep_sys_exit_thunk+0x35/0x67
[  109.164377]  [<ffffffff810fdfaf>] ? audit_syscall_entry+0x172/0x1a5
[  109.164383]  [<ffffffff815502f5>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  109.164389]  [<ffffffff8100ea72>] system_call_fastpath+0x16/0x1b
[  109.164394] ---[ end trace 88e8568246ed0b1d ]---

which will happen if you don't actually have an HP CISS adapter,
since it'll do an uncondional removal of a proc directory it
never attempted to create in that case.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-10 14:40:52 +01:00
Mike Miller
6fa9775208 cciss: remove overlapping PCI IDs
This patch removes the controller overlap between cciss and hpsa. It was
decided that no overlap should exist. All new controllers will use the hpsa
SCSI based driver.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-28 06:33:27 -06:00
Vasiliy Kulikov
7ab5118d7c block: cciss: fix information leak to userland
Structure IOCTL_Command_struct is copied to userland with
some padding fields at the end of the struct unitialized.
It leads to leaking of contents of kernel stack memory.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-28 06:31:55 -06:00
Stephen M. Cameron
4205df3400 cciss: remove controllers supported by hpsa
We would prefer not to have any overlap between the two drivers.
Remove the cciss_allow_hpsa option, as it it is no longer needed.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-23 18:47:31 +02:00
Stephen M. Cameron
332c2f80a8 cciss: use usleep_range not msleep for small sleeps
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-23 18:45:09 +02:00
Stephen M. Cameron
186fb9cf6a cciss: limit commands allocated on reset_devices
This is to conserve memory in a memory-limited kdump scenario

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-23 18:45:08 +02:00
Stephen M. Cameron
f442e64b93 cciss: Use kernel provided PCI state save and restore functions
and use the doorbell reset method if available (which doesn't
lock up the controller if you properly save and restore all
the PCI registers that you're supposed to.)

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-23 18:45:07 +02:00
Stephen M. Cameron
afa842fa64 cciss: fix board status waiting code
After a reset, we should first wait for the board to become "not ready",
and then wait for it to become "ready", instead of immediately
waiting for it to become "ready", and do this waiting *after*
restoring PCI config space registers.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-23 18:45:06 +02:00
Linus Torvalds
8abfc6e7a4 Merge branch 'for-2.6.37/drivers' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.37/drivers' of git://git.kernel.dk/linux-2.6-block: (95 commits)
  cciss: fix PCI IDs for new Smart Array controllers
  drbd: add race-breaker to drbd_go_diskless
  drbd: use dynamic_dev_dbg to optionally log uuid changes
  dynamic_debug.h: Fix dynamic_dev_dbg() macro if CONFIG_DYNAMIC_DEBUG not set
  drbd: cleanup: change "<= 0" to "== 0"
  drbd: relax the grace period of the md_sync timer again
  drbd: add some more explicit drbd_md_sync
  drbd: drop wrong debug asserts, fix recently introduced race
  drbd: cleanup useless leftover warn/error printk's
  drbd: add explicit drbd_md_sync to drbd_resync_finished
  drbd: Do not log an ASSERT for P_OV_REQUEST packets while C_CONNECTED
  drbd: fix for possible deadlock on IO error during resync
  drbd: fix unlikely access after free and list corruption
  drbd: fix for spurious fullsync (uuids rotated too fast)
  drbd: allow for explicit resync-finished notifications
  drbd: preparation commit, using full state in receive_state()
  drbd: drbd_send_ack_dp must not rely on header information
  drbd: Fix regression in recv_bm_rle_bits (compressed bitmap)
  drbd: Fixed a stupid copy and paste error
  drbd: Allow larger values for c-fill-target.
  ...

Fix up trivial conflict in drivers/block/ataflop.c due to BKL removal
2010-10-22 17:03:12 -07:00
Linus Torvalds
c37927d435 Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  block: autoconvert trivial BKL users to private mutex
  drivers: autoconvert trivial BKL users to private mutex
  ipmi: autoconvert trivial BKL users to private mutex
  mac: autoconvert trivial BKL users to private mutex
  mtd: autoconvert trivial BKL users to private mutex
  scsi: autoconvert trivial BKL users to private mutex

Fix up trivial conflicts (due to addition of private mutex right next to
deletion of a version string) in drivers/char/pcmcia/cm40[04]0_cs.c
2010-10-22 10:49:54 -07:00
Mike Miller
6362beea89 cciss: fix PCI IDs for new Smart Array controllers
cciss: fix PCI IDs for new controllers

This patch fixes the botched up PCI IDs of new controllers. Please consider
this patch for inclusion.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-19 09:40:34 +02:00
Arnd Bergmann
2a48fc0ab2 block: autoconvert trivial BKL users to private mutex
The block device drivers have all gained new lock_kernel
calls from a recent pushdown, and some of the drivers
were already using the BKL before.

This turns the BKL into a set of per-driver mutexes.
Still need to check whether this is safe to do.

file=$1
name=$2
if grep -q lock_kernel ${file} ; then
    if grep -q 'include.*linux.mutex.h' ${file} ; then
            sed -i '/include.*<linux\/smp_lock.h>/d' ${file}
    else
            sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file}
    fi
    sed -i ${file} \
        -e "/^#include.*linux.mutex.h/,$ {
                1,/^\(static\|int\|long\)/ {
                     /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex);

} }"  \
    -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \
    -e '/[      ]*cycle_kernel_lock();/d'
else
    sed -i -e '/include.*\<smp_lock.h\>/d' ${file}  \
                -e '/cycle_kernel_lock()/d'
fi

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-05 15:01:10 +02:00
Dan Carpenter
b0722cb1ac cciss: freeing uninitialized data on error path
The "h->scatter_list" is allocated inside a for loop.  If any of those
allocations fail, then the rest of the list is uninitialized data.  When
we free it we should start from the top and free backwards so that we
don't call kfree() on uninitialized pointers.

Also if the allocation for "h->scatter_list" fails then we would get an
Oops here.  I should have noticed this when I send: 4ee69851c "cciss:
handle allocation failure."  but I didn't.  Sorry about that.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-21 11:49:17 +02:00
Stephen M. Cameron
fcfb5c0ce1 cciss: remove some superfluous tests from cciss_bigpassthru()
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:12:40 +02:00
Stephen M. Cameron
0c9f5ba7cb cciss: factor out cciss_big_passthru
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:12:39 +02:00
Stephen M. Cameron
f32f125b1c cciss: factor out cciss_passthru
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:12:37 +02:00
Stephen M. Cameron
0894b32c5c cciss: factor out cciss_getluninfo
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:12:36 +02:00
Stephen M. Cameron
c525919ddf cciss: factor out cciss_getdrivver
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:12:35 +02:00
Stephen M. Cameron
8a4f7fbfdd cciss: factor out cciss_getfirmver
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:12:34 +02:00
Stephen M. Cameron
d18dfad4e2 cciss: factor out cciss_getbustypes
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:12:33 +02:00
Stephen M. Cameron
93c7493113 cciss: factor out cciss_getheartbeat
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:12:32 +02:00