mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-28 21:33:52 +00:00
26350 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Suren Baghdasaryan
|
49b0638502 |
mm: enable page walking API to lock vmas during the walk
walk_page_range() and friends often operate under write-locked mmap_lock. With introduction of vma locks, the vmas have to be locked as well during such walks to prevent concurrent page faults in these areas. Add an additional member to mm_walk_ops to indicate locking requirements for the walk. The change ensures that page walks which prevent concurrent page faults by write-locking mmap_lock, operate correctly after introduction of per-vma locks. With per-vma locks page faults can be handled under vma lock without taking mmap_lock at all, so write locking mmap_lock would not stop them. The change ensures vmas are properly locked during such walks. A sample issue this solves is do_mbind() performing queue_pages_range() to queue pages for migration. Without this change a concurrent page can be faulted into the area and be left out of migration. Link: https://lkml.kernel.org/r/20230804152724.3090321-2-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Suggested-by: Jann Horn <jannh@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Michel Lespinasse <michel@lespinasse.org> Cc: Peter Xu <peterx@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Sven Joachim
|
1f2190d6b7 |
arch/*/configs/*defconfig: Replace AUTOFS4_FS by AUTOFS_FS
Commit
|
||
|
Andrew Donnellan
|
106ea7ffd5 |
Revert "powerpc/64s: Remove support for ELFv1 little endian userspace"
This reverts commit
|
||
|
Benjamin Gray
|
ccb381e1af |
powerpc/kasan: Disable KCOV in KASAN code
As per the generic KASAN code in mm/kasan, disable KCOV with KCOV_INSTRUMENT := n in the makefile. This fixes a ppc64 boot hang when KCOV and KASAN are enabled. kasan_early_init() gets called before a PACA is initialised, but the KCOV hook expects a valid PACA. Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230710044143.146840-1-bgray@linux.ibm.com |
||
|
Uwe Kleine-König
|
8739312ed2 |
powerpc/512x: lpbfifo: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230711143145.1192651-1-u.kleine-koenig@pengutronix.de |
||
|
Russell Currey
|
fb74c4e3be |
powerpc/crypto: Add gitignore for generated P10 AES/GCM .S files
aesp10-ppc.S and ghashp10-ppc.S are autogenerated and not tracked by git, so they should be ignored. This is doing the same as the P8 files in drivers/crypto/vmx/.gitignore but for the P10 files in arch/powerpc/crypto. Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230713042206.85669-1-ruscur@russell.cc |
||
|
Christophe Leroy
|
b49e578b93 |
Revert "powerpc/bug: Provide better flexibility to WARN_ON/__WARN_FLAGS() with asm goto"
This partly reverts commit |
||
|
Haren Myneni
|
b59c9dc4d9 |
powerpc/pseries/vas: Hold mmap_mutex after mmap lock during window close
Commit |
||
|
Aneesh Kumar K.V
|
cf53564b11 |
powerpc/mm/book3s64/hash/4k: Add pmd_same callback for 4K page size
With commit
|
||
|
Michael Ellerman
|
cf65b12c17 |
powerpc/64e: Fix obtool warnings in exceptions-64e.S
Since commit
|
||
|
Michael Ellerman
|
5bcedc5931 |
powerpc/security: Fix Speculation_Store_Bypass reporting on Power10
Nageswara reported that /proc/self/status was showing "vulnerable" for
the Speculation_Store_Bypass feature on Power10, eg:
$ grep Speculation_Store_Bypass: /proc/self/status
Speculation_Store_Bypass: vulnerable
But at the same time the sysfs files, and lscpu, were showing "Not
affected".
This turns out to simply be a bug in the reporting of the
Speculation_Store_Bypass, aka. PR_SPEC_STORE_BYPASS, case.
When SEC_FTR_STF_BARRIER was added, so that firmware could communicate
the vulnerability was not present, the code in ssb_prctl_get() was not
updated to check the new flag.
So add the check for SEC_FTR_STF_BARRIER being disabled. Rather than
adding the new check to the existing if block and expanding the comment
to cover both cases, rewrite the three cases to be separate so they can
be commented separately for clarity.
Fixes:
|
||
|
Michael Ellerman
|
8bbe9fee58 |
powerpc/64s: Fix native_hpte_remove() to be irq-safe
Lockdep warns that the use of the hpte_lock in native_hpte_remove() is
not safe against an IRQ coming in:
================================
WARNING: inconsistent lock state
6.4.0-rc2-g0c54f4d30ecc #1 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
qemu-system-ppc/93865 [HC0[0]:SC0[0]:HE1:SE1] takes:
c0000000021f5180 (hpte_lock){+.?.}-{0:0}, at: native_lock_hpte+0x8/0xd0
{IN-SOFTIRQ-W} state was registered at:
lock_acquire+0x134/0x3f0
native_lock_hpte+0x44/0xd0
native_hpte_insert+0xd4/0x2a0
__hash_page_64K+0x218/0x4f0
hash_page_mm+0x464/0x840
do_hash_fault+0x11c/0x260
data_access_common_virt+0x210/0x220
__ip_select_ident+0x140/0x150
...
net_rx_action+0x3bc/0x440
__do_softirq+0x180/0x534
...
sys_sendmmsg+0x34/0x50
system_call_exception+0x128/0x320
system_call_common+0x160/0x2e4
...
Possible unsafe locking scenario:
CPU0
----
lock(hpte_lock);
<Interrupt>
lock(hpte_lock);
*** DEADLOCK ***
...
Call Trace:
dump_stack_lvl+0x98/0xe0 (unreliable)
print_usage_bug.part.0+0x250/0x278
mark_lock+0xc9c/0xd30
__lock_acquire+0x440/0x1ca0
lock_acquire+0x134/0x3f0
native_lock_hpte+0x44/0xd0
native_hpte_remove+0xb0/0x190
kvmppc_mmu_map_page+0x650/0x698 [kvm_pr]
kvmppc_handle_pagefault+0x534/0x6e8 [kvm_pr]
kvmppc_handle_exit_pr+0x6d8/0xe90 [kvm_pr]
after_sprg3_load+0x80/0x90 [kvm_pr]
kvmppc_vcpu_run_pr+0x108/0x270 [kvm_pr]
kvmppc_vcpu_run+0x34/0x48 [kvm]
kvm_arch_vcpu_ioctl_run+0x340/0x470 [kvm]
kvm_vcpu_ioctl+0x338/0x8b8 [kvm]
sys_ioctl+0x7c4/0x13e0
system_call_exception+0x128/0x320
system_call_common+0x160/0x2e4
I suspect kvm_pr is the only caller that doesn't already have IRQs
disabled, which is why this hasn't been reported previously.
Fix it by disabling IRQs in native_hpte_remove().
Fixes:
|
||
|
Linus Torvalds
|
22dcc7d77f |
powerpc fixes for 6.5 #2
- Fix PCIe MEM size for pci2 node on Turris 1.x boards. - Two minor build fixes. Thanks to: Christophe Leroy, Douglas Anderson, Pali Rohár, Petr Mladek, Randy Dunlap. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmSoB1MTHG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgPvMEACrkNuqV1mpI2c6m41mWZDBt/9YmSBX Gh061wI5KN4X2hGNvVJAFs49zuWl2SAET3UQxxk4Bux5HsIoZsdqFDZaTCT17zNo 8kFPajqwEbLQ1JgrFH3Y9ZMXYhR09l3jJ+lkf1JBvP4CQGfrxf2vRPu9+qGsnEeQ +9d9Zy3GWXCqhRTcDAocLsY0f+Ra5DHC2t7tynoXDy4SR0G5/HOfNgg3Ye3juu6u NHXI2w3KZfRaRXjq/V35HAxODOnso7UlIImsnk6a4GRV+VkYbBcoRTlbHJiPf4f+ DaPx38C8Sn0SM90HT4ck+jc8OLm2RGpcmPnBSHvv6EvGC1CysLMvVaw7ZFmpdYlN e9A9KYea+WkMOnb9J+xsLUN3sYBfflGBOSiRTpOKBQCaH2bNiT7d7Gz1FoRj6l0Q zTjoQEBPo/RbpdZl4ZHXj4QUxZzQSkituqhVgK8675IwYR65cekM1SMnVGgMdA7o BHczjvGC9I9c/yletazqQuQWR+Kn9WXiwZ3Aeh0uKIBgjXSId5n4GTToj68/pUtj XN8kvZYrb8W3br/7XbGmp7+55NJq2l9nqOcQPMX17z2jVRRK+gtP2MBGWu7XbUoL CBQXpke7dHtf75TxA2WmbWn2Jy+0EO1U43kEBv1+GCS9IfoyDX4pobw1QXHgH5Gl r1VbqtrcTcvTrQ== =YCPm -----END PGP SIGNATURE----- Merge tag 'powerpc-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix PCIe MEM size for pci2 node on Turris 1.x boards - Two minor build fixes Thanks to Christophe Leroy, Douglas Anderson, Pali Rohár, Petr Mladek, and Randy Dunlap. * tag 'powerpc-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: dts: turris1x.dts: Fix PCIe MEM size for pci2 node powerpc: Include asm/nmi.c in mobility.c for watchdog_hardlockup_set_timeout_pct() powerpc: allow PPC_EARLY_DEBUG_CPM only when SERIAL_CPM=y |
||
|
Linus Torvalds
|
868a9fd948 |
TTY/Serial driver updates for 6.5-rc1.
Here is the big set of tty/serial driver updates for 6.5-rc1.
Included in here are:
- tty_audit code cleanups from Jiri
- more 8250 cleanups from Ilpo
- samsung_tty driver bugfixes
- 8250 lock port updates
- usual fsl_lpuart driver updates and fixes
- other small serial driver fixes and updates, full details in the
shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKVTQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl+wACgwWX8fdrkBHASPVkcYOn8xa27E08AnjNz2Y8K
vvOII6EEYKwFjEkjAoIX
=By18
-----END PGP SIGNATURE-----
Merge tag 'tty-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty/serial driver updates for 6.5-rc1.
Included in here are:
- tty_audit code cleanups from Jiri
- more 8250 cleanups from Ilpo
- samsung_tty driver bugfixes
- 8250 lock port updates
- usual fsl_lpuart driver updates and fixes
- other small serial driver fixes and updates, full details in the
shortlog
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits)
tty_audit: make data of tty_audit_log() const
tty_audit: make tty pointers in exposed functions const
tty_audit: make icanon a bool
tty_audit: invert the condition in tty_audit_log()
tty_audit: use kzalloc() in tty_audit_buf_alloc()
tty_audit: use TASK_COMM_LEN for task comm
Revert "8250: add support for ASIX devices with a FIFO bug"
serial: atmel: don't enable IRQs prematurely
tty: serial: Add Nuvoton ma35d1 serial driver support
tty: serial: fsl_lpuart: add earlycon for imx8ulp platform
tty: serial: imx: fix rs485 rx after tx
selftests: tty: add selftest for tty timestamp updates
tty: tty_io: update timestamps on all device nodes
tty: fix hang on tty device with no_room set
serial: core: fix -EPROBE_DEFER handling in init
serial: 8250_omap: Use force_suspend and resume for system suspend
tty: serial: samsung_tty: Use abs() to simplify some code
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error
serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
...
|
||
|
Pali Rohár
|
abaa02fc94 |
powerpc: dts: turris1x.dts: Fix PCIe MEM size for pci2 node
Freescale PCIe controllers on their PCIe Root Ports do not have any
mappable PCI BAR allocate from PCIe MEM.
Information about 1MB window on BAR0 of PCIe Root Port was misleading
because Freescale PCIe controllers have at BAR0 position different register
PEXCSRBAR, and kernel correctly skipts BAR0 for these Freescale PCIe Root
Ports.
So update comment about P2020 PCIe Root Port and decrease PCIe MEM size
required for PCIe controller (pci2 node) on which is on-board xHCI
controller.
lspci confirms that on P2020 PCIe Root Port is no PCI BAR and /proc/iomem
sees that only c0000000-c000ffff and c0010000-c0011fff ranges are used.
Fixes:
|
||
|
Douglas Anderson
|
6cb44bef35 |
powerpc: Include asm/nmi.c in mobility.c for watchdog_hardlockup_set_timeout_pct()
The powerpc/platforms/pseries/mobility.c calls watchdog_hardlockup_set_timeout_pct(), which is declared in <asm/nmi.h>. We used to automatically get <asm/nmi.h> included, but that changed as of commit |
||
|
Randy Dunlap
|
39f4968403 |
powerpc: allow PPC_EARLY_DEBUG_CPM only when SERIAL_CPM=y
In a randconfig with CONFIG_SERIAL_CPM=m and
CONFIG_PPC_EARLY_DEBUG_CPM=y, there is a build error:
ERROR: modpost: "udbg_putc" [drivers/tty/serial/cpm_uart/cpm_uart.ko] undefined!
Prevent the build error by allowing PPC_EARLY_DEBUG_CPM only when
SERIAL_CPM=y.
Fixes:
|
||
|
Linus Torvalds
|
ad2885979e |
Kbuild updates for v6.5
- Remove the deprecated rule to build *.dtbo from *.dts
- Refactor section mismatch detection in modpost
- Fix bogus ARM section mismatch detections
- Fix error of 'make gtags' with O= option
- Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error with
the latest LLVM version
- Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed
- Ignore more compiler-generated symbols for kallsyms
- Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles
- Enable more kernel-doc warnings with W=2
- Refactor <linux/export.h> by generating KSYMTAB data by modpost
- Deprecate <asm/export.h> and <asm-generic/export.h>
- Remove the EXPORT_DATA_SYMBOL macro
- Move the check for static EXPORT_SYMBOL back to modpost, which makes
the build faster
- Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm
- Warn missing MODULE_DESCRIPTION when building modules with W=1
- Make 'make clean' robust against too long argument error
- Exclude more objects from GCOV to fix CFI failures with GCOV
- Allow 'make modules_install' to install modules.builtin and
modules.builtin.modinfo even when CONFIG_MODULES is disabled
- Include modules.builtin and modules.builtin.modinfo in the linux-image
Debian package even when CONFIG_MODULES is disabled
- Revive "Entering directory" logging for the latest Make version
-----BEGIN PGP SIGNATURE-----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=Rc1z
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove the deprecated rule to build *.dtbo from *.dts
- Refactor section mismatch detection in modpost
- Fix bogus ARM section mismatch detections
- Fix error of 'make gtags' with O= option
- Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error
with the latest LLVM version
- Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed
- Ignore more compiler-generated symbols for kallsyms
- Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles
- Enable more kernel-doc warnings with W=2
- Refactor <linux/export.h> by generating KSYMTAB data by modpost
- Deprecate <asm/export.h> and <asm-generic/export.h>
- Remove the EXPORT_DATA_SYMBOL macro
- Move the check for static EXPORT_SYMBOL back to modpost, which makes
the build faster
- Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm
- Warn missing MODULE_DESCRIPTION when building modules with W=1
- Make 'make clean' robust against too long argument error
- Exclude more objects from GCOV to fix CFI failures with GCOV
- Allow 'make modules_install' to install modules.builtin and
modules.builtin.modinfo even when CONFIG_MODULES is disabled
- Include modules.builtin and modules.builtin.modinfo in the
linux-image Debian package even when CONFIG_MODULES is disabled
- Revive "Entering directory" logging for the latest Make version
* tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (72 commits)
modpost: define more R_ARM_* for old distributions
kbuild: revive "Entering directory" for Make >= 4.4.1
kbuild: set correct abs_srctree and abs_objtree for package builds
scripts/mksysmap: Ignore prefixed KCFI symbols
kbuild: deb-pkg: remove the CONFIG_MODULES check in buildeb
kbuild: builddeb: always make modules_install, to install modules.builtin*
modpost: continue even with unknown relocation type
modpost: factor out Elf_Sym pointer calculation to section_rel()
modpost: factor out inst location calculation to section_rel()
kbuild: Disable GCOV for *.mod.o
kbuild: Fix CFI failures with GCOV
kbuild: make clean rule robust against too long argument error
script: modpost: emit a warning when the description is missing
kbuild: make modules_install copy modules.builtin(.modinfo)
linux/export.h: rename 'sec' argument to 'license'
modpost: show offset from symbol for section mismatch warnings
modpost: merge two similar section mismatch warnings
kbuild: implement CONFIG_TRIM_UNUSED_KSYMS without recursion
modpost: use null string instead of NULL pointer for default namespace
modpost: squash sym_update_namespace() into sym_add_exported()
...
|
||
|
Linus Torvalds
|
9070577ae9 |
pci-v6.5-changes
-----BEGIN PGP SIGNATURE-----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=xpTd
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Export pcie_retrain_link() for use outside ASPM
- Add Data Link Layer Link Active Reporting as another way for
pcie_retrain_link() to determine the link is up
- Work around link training failures (especially on the ASMedia
ASM2824 switch) by training first at 2.5GT/s and then attempting
higher rates
Resource management:
- When we coalesce host bridge windows, remove invalidated resources
from the resource tree so future allocations work correctly
Hotplug:
- Cancel bringup sequence if card is not present, to keep from
blinking Power Indicator indefinitely
- Reassign bridge resources if necessary for ACPI hotplug
Driver binding:
- Convert platform_device .remove() callbacks to return void instead
of a mostly useless int
Power management:
- Reduce wait time for secondary bus to be ready to speed up resume
- Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in
D3cold
- Call _REG when transitioning D-states so AML that uses the PCI
config space OpRegion works, which fixes some ASMedia GPIO
controllers after resume
Virtualization:
- Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM
hang when guest is rebooted
- Add function 1 DMA alias quirk for Marvell 88SE9235
Error handling:
- Unexport pci_save_aer_state() since it's only used in drivers/pci/
- Drop recommendation for drivers to configure AER Capability, since
the PCI core does this for all devices
ASPM:
- Disable ASPM on MFD function removal to avoid use-after-free
- Tighten up pci_enable_link_state() and pci_disable_link_state()
interfaces so they don't enable/disable states the driver didn't
specify
- Avoid link retraining race that can happen if ASPM sets link
control parameters while the link is in the midst of training for
some other reason
Endpoint framework:
- Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be
different from "PCI Endpoint NTB driver"
- Automatically create a function specific attributes group for
endpoint drivers to avoid reference counting issues
- Fix many EPC test issues
- Return pci_epf_type_add_cfs() error if EPF has no driver
- Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq()
MSI vector parameters
- Pass EPF device ID to driver probe functions
- Return -EALREADY if EPC has already been started/stopped
- Add linkdown notifier support and use it in qcom-ep
- Add Bus Master Enable event support and use it in qcom-ep
- Add Qualcomm Modem Host Interface (MHI) endpoint driver
- Add Layerscape PME interrupt handling to manage link-up
notification
Cadence PCIe controller driver:
- Wait for link retrain to complete when working around the J721E
i2085 erratum with Gen2 mode
Faraday FTPC100 PCI controller driver:
- Release clock resources on error paths
Freescale i.MX6 PCIe controller driver:
- Save and restore Root Port MSI control to work around hardware defect
Intel VMD host bridge driver:
- Reset VMD config register between soft reboots
- Capture pci_reset_bus() return value instead of printing junk when
it fails
Qualcomm PCIe controller driver:
- Add SDX65 endpoint compatible string to DT binding
- Disable register write access after init for IP v2.3.3, v2.9.0
- Use DWC helpers for enabling/disabling writes to DBI registers
- Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
v2.3.3, v2.7.0, v2.9.0
- Reuse v2.3.2 post-init sequence for v2.4.0
Renesas R-Car PCIe controller driver:
- Remove unused static pcie_base and pcie_dev
Rockchip PCIe controller driver:
- Remove writes to unused registers
- Write endpoint Device ID using correct register
- Assert PCI Configuration Enable bit after probe so endpoint
responds instead of generating Request Retry Status messages
- Poll waiting for PHY PLLs to lock
- Update RK3399 example DT binding to be valid
- Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
manually generating PCIe message
- Use multiple windows to avoid address translation conflicts
- Use u32 (not u16) when accessing 32-bit registers
- Hide MSI-X Capability, since RK3399 can't generate MSI-X
- Set endpoint controller required alignment to 256
Synopsys DesignWare PCIe controller driver:
- Wait for link to come up only if we've initiated link training
Miscellaneous:
- Add pci_clear_master() stub for non-CONFIG_PCI"
* tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
Documentation: PCI: correct spelling
PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()
PCI: xgene-msi: Convert to platform remove callback returning void
PCI: tegra: Convert to platform remove callback returning void
PCI: rockchip-host: Convert to platform remove callback returning void
PCI: mvebu: Convert to platform remove callback returning void
PCI: mt7621: Convert to platform remove callback returning void
PCI: mediatek-gen3: Convert to platform remove callback returning void
PCI: mediatek: Convert to platform remove callback returning void
PCI: iproc: Convert to platform remove callback returning void
PCI: hisi-error: Convert to platform remove callback returning void
PCI: dwc: Convert to platform remove callback returning void
PCI: j721e: Convert to platform remove callback returning void
PCI: brcmstb: Convert to platform remove callback returning void
PCI: altera-msi: Convert to platform remove callback returning void
PCI: altera: Convert to platform remove callback returning void
PCI: aardvark: Convert to platform remove callback returning void
PCI: rcar: Use correct product family name for Renesas R-Car
PCI: layerscape: Add the endpoint linkup notifier support
PCI: endpoint: pci-epf-vntb: Fix typo in comments
...
|
||
|
Linus Torvalds
|
d8b0bd57c2 |
powerpc updates for 6.5
- Extend KCSAN support to 32-bit and BookE. Add some KCSAN annotations.
- Make ELFv2 ABI the default for 64-bit big-endian kernel builds, and use
the -mprofile-kernel option (kernel specific ftrace ABI) for big endian
ELFv2 kernels.
- Add initial Dynamic Execution Control Register (DEXCR) support, and allow
the ROP protection instructions to be used on Power 10.
- Various other small features and fixes.
Thanks to: Aditya Gupta, Aneesh Kumar K.V, Benjamin Gray, Brian King,
Christophe Leroy, Colin Ian King, Dmitry Torokhov, Gaurav Batra, Jean Delvare,
Joel Stanley, Marco Elver, Masahiro Yamada, Nageswara R Sastry, Nathan
Chancellor, Naveen N Rao, Nayna Jain, Nicholas Piggin, Paul Gortmaker, Randy
Dunlap, Rob Herring, Rohan McLure, Russell Currey, Sachin Sant, Timothy
Pearson, Tom Rix, Uwe Kleine-König.
-----BEGIN PGP SIGNATURE-----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=ssit
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Extend KCSAN support to 32-bit and BookE. Add some KCSAN annotations
- Make ELFv2 ABI the default for 64-bit big-endian kernel builds, and
use the -mprofile-kernel option (kernel specific ftrace ABI) for big
endian ELFv2 kernels
- Add initial Dynamic Execution Control Register (DEXCR) support, and
allow the ROP protection instructions to be used on Power 10
- Various other small features and fixes
Thanks to Aditya Gupta, Aneesh Kumar K.V, Benjamin Gray, Brian King,
Christophe Leroy, Colin Ian King, Dmitry Torokhov, Gaurav Batra, Jean
Delvare, Joel Stanley, Marco Elver, Masahiro Yamada, Nageswara R Sastry,
Nathan Chancellor, Naveen N Rao, Nayna Jain, Nicholas Piggin, Paul
Gortmaker, Randy Dunlap, Rob Herring, Rohan McLure, Russell Currey,
Sachin Sant, Timothy Pearson, Tom Rix, and Uwe Kleine-König.
* tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (76 commits)
powerpc: remove checks for binutils older than 2.25
powerpc: Fail build if using recordmcount with binutils v2.37
powerpc/iommu: TCEs are incorrectly manipulated with DLPAR add/remove of memory
powerpc/iommu: Only build sPAPR access functions on pSeries
powerpc: powernv: Annotate data races in opal events
powerpc: Mark writes registering ipi to host cpu through kvm and polling
powerpc: Annotate accesses to ipi message flags
powerpc: powernv: Fix KCSAN datarace warnings on idle_state contention
powerpc: Mark [h]ssr_valid accesses in check_return_regs_valid
powerpc: qspinlock: Enforce qnode writes prior to publishing to queue
powerpc: qspinlock: Mark accesses to qnode lock checks
powerpc/powernv/pci: Remove last IODA1 defines
powerpc/powernv/pci: Remove MVE code
powerpc/powernv/pci: Remove ioda1 support
powerpc: 52xx: Make immr_id DT match tables static
powerpc: mpc512x: Remove open coded "ranges" parsing
powerpc: fsl_soc: Use of_range_to_resource() for "ranges" parsing
powerpc: fsl: Use of_property_read_reg() to parse "reg"
powerpc: fsl_rio: Use of_range_to_resource() for "ranges" parsing
macintosh: Use of_property_read_reg() to parse "reg"
...
|
||
|
Linus Torvalds
|
d35ac6ac0e |
IOMMU Updates for Linux v6.5
Including:
- Core changes:
- iova_magazine_alloc() optimization
- Make flush-queue an IOMMU driver capability
- Consolidate the error handling around device attachment
- AMD IOMMU changes:
- AVIC Interrupt Remapping Improvements
- Some minor fixes and cleanups
- Intel VT-d changes from Lu Baolu:
- Small and misc cleanups
- ARM-SMMU changes from Will Deacon:
- Device-tree binding updates:
* Add missing clocks for SC8280XP and SA8775 Adreno SMMUs
* Add two new Qualcomm SMMUs in SDX75 and SM6375
- Workarounds for Arm MMU-700 errata:
* 1076982: Avoid use of SEV-based cmdq wakeup
* 2812531: Terminate command batches with a CMD_SYNC
* Enforce single-stage translation to avoid nesting-related errata
- Set the correct level hint for range TLB invalidation on teardown
- Some other minor fixes and cleanups (including Freescale PAMU and
virtio-iommu changes)
-----BEGIN PGP SIGNATURE-----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=aRMe
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- iova_magazine_alloc() optimization
- Make flush-queue an IOMMU driver capability
- Consolidate the error handling around device attachment
AMD IOMMU changes:
- AVIC Interrupt Remapping Improvements
- Some minor fixes and cleanups
Intel VT-d changes from Lu Baolu:
- Small and misc cleanups
ARM-SMMU changes from Will Deacon:
- Device-tree binding updates:
- Add missing clocks for SC8280XP and SA8775 Adreno SMMUs
- Add two new Qualcomm SMMUs in SDX75 and SM6375
- Workarounds for Arm MMU-700 errata:
- 1076982: Avoid use of SEV-based cmdq wakeup
- 2812531: Terminate command batches with a CMD_SYNC
- Enforce single-stage translation to avoid nesting-related errata
- Set the correct level hint for range TLB invalidation on teardown
.. and some other minor fixes and cleanups (including Freescale PAMU
and virtio-iommu changes)"
* tag 'iommu-updates-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (50 commits)
iommu/vt-d: Remove commented-out code
iommu/vt-d: Remove two WARN_ON in domain_context_mapping_one()
iommu/vt-d: Handle the failure case of dmar_reenable_qi()
iommu/vt-d: Remove unnecessary (void*) conversions
iommu/amd: Remove extern from function prototypes
iommu/amd: Use BIT/BIT_ULL macro to define bit fields
iommu/amd: Fix DTE_IRQ_PHYS_ADDR_MASK macro
iommu/amd: Fix compile error for unused function
iommu/amd: Improving Interrupt Remapping Table Invalidation
iommu/amd: Do not Invalidate IRT when IRTE caching is disabled
iommu/amd: Introduce Disable IRTE Caching Support
iommu/amd: Remove the unused struct amd_ir_data.ref
iommu/amd: Switch amd_iommu_update_ga() to use modify_irte_ga()
iommu/arm-smmu-v3: Set TTL invalidation hint better
iommu/arm-smmu-v3: Document nesting-related errata
iommu/arm-smmu-v3: Add explicit feature for nesting
iommu/arm-smmu-v3: Document MMU-700 erratum 2812531
iommu/arm-smmu-v3: Work around MMU-600 erratum 1076982
dt-bindings: arm-smmu: Add SDX75 SMMU compatible
dt-bindings: arm-smmu: Add SM6375 GPU SMMU
...
|
||
|
Linus Torvalds
|
632f54b4d6 |
slab updates for 6.5
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmSZtjsACgkQu+CwddJF iJqCTwf/XVhmAD7zMOj6g1aak5oHNZDRG5jufM5UNXmiWjCWT3w4DpltrJkz0PPm mg3Ac5fjNUqesZ1SGtUbvoc363smroBrRudGEFrsUhqBcpR+S4fSneoDk+xqMypf VLXP/8kJlFEBGMiR7ouAWnR4+u6JgY4E8E8JIPNzao5KE/L1lD83nY+Usjc/01ek oqMyYVFRfncsGjGJXc5fOOTTCj768mRroF0sLmEegIonnwQkSHE7HWJ/nyaVraDV bomnTIgMdVIDqharin08ZPIM7qBIWM09Uifaf0lIs6fIA94pQP+5Ko3mum2P/S+U ON/qviSrlNgRXoHPJ3hvPHdfEU9cSg== =1d0v -----END PGP SIGNATURE----- Merge tag 'slab-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab updates from Vlastimil Babka: - SLAB deprecation: Following the discussion at LSF/MM 2023 [1] and no objections, the SLAB allocator is deprecated by renaming the config option (to make its users notice) to CONFIG_SLAB_DEPRECATED with updated help text. SLUB should be used instead. Existing defconfigs with CONFIG_SLAB are also updated. - SLAB_NO_MERGE kmem_cache flag (Jesper Dangaard Brouer): There are (very limited) cases where kmem_cache merging is undesirable, and existing ways to prevent it are hacky. Introduce a new flag to do that cleanly and convert the existing hacky users. Btrfs plans to use this for debug kernel builds (that use case is always fine), networking for performance reasons (that should be very rare). - Replace the usage of weak PRNGs (David Keisar Schmidt): In addition to using stronger RNGs for the security related features, the code is a bit cleaner. - Misc code cleanups (SeongJae Parki, Xiongwei Song, Zhen Lei, and zhaoxinchao) Link: https://lwn.net/Articles/932201/ [1] * tag 'slab-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm/slab_common: use SLAB_NO_MERGE instead of negative refcount mm/slab: break up RCU readers on SLAB_TYPESAFE_BY_RCU example code mm/slab: add a missing semicolon on SLAB_TYPESAFE_BY_RCU example code mm/slab_common: reduce an if statement in create_cache() mm/slab: introduce kmem_cache flag SLAB_NO_MERGE mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED mm/slab: remove HAVE_HARDENED_USERCOPY_ALLOCATOR mm/slab_common: Replace invocation of weak PRNG mm/slab: Replace invocation of weak PRNG slub: Don't read nr_slabs and total_objects directly slub: Remove slabs_node() function slub: Remove CONFIG_SMP defined check slub: Put objects_show() into CONFIG_SLUB_DEBUG enabled block slub: Correct the error code when slab_kset is NULL mm/slab: correct return values in comment for _kmem_cache_create() |
||
|
Linus Torvalds
|
1b722407a1 |
drm changes for 6.5-rc1:
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware. This can be used to
distinguish between pci link down and firmware getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x, sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795
-----BEGIN PGP SIGNATURE-----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=FmUA
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There is one set of patches to misc for a i915 gsc/mei proxy driver.
Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots
of refactoring.
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var
clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware.
This can be used to distinguish between pci link down and firmware
getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer
platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x,
sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795"
* tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits)
drm/i915: Fix a NULL vs IS_ERR() bug
drm/i915: make i915_drm_client_fdinfo() reference conditional again
drm/i915/huc: Fix missing error code in intel_huc_init()
drm/i915/gsc: take a wakeref for the proxy-init-completion check
drm/msm/a6xx: Add A610 speedbin support
drm/msm/a6xx: Add A619_holi speedbin support
drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
drm/msm/a6xx: Fix some A619 tunables
drm/msm/a6xx: Add A610 support
drm/msm/a6xx: Add support for A619_holi
drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
drm/msm/a6xx: Introduce GMU wrapper support
drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
drm/msm/a6xx: Extend and explain UBWC config
drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
drm/msm/a6xx: Add a helper for software-resetting the GPU
drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
...
|
||
|
Linus Torvalds
|
9471f1f2f5 |
Merge branch 'expand-stack'
This modifies our user mode stack expansion code to always take the
mmap_lock for writing before modifying the VM layout.
It's actually something we always technically should have done, but
because we didn't strictly need it, we were being lazy ("opportunistic"
sounds so much better, doesn't it?) about things, and had this hack in
place where we would extend the stack vma in-place without doing the
proper locking.
And it worked fine. We just needed to change vm_start (or, in the case
of grow-up stacks, vm_end) and together with some special ad-hoc locking
using the anon_vma lock and the mm->page_table_lock, it all was fairly
straightforward.
That is, it was all fine until Ruihan Li pointed out that now that the
vma layout uses the maple tree code, we *really* don't just change
vm_start and vm_end any more, and the locking really is broken. Oops.
It's not actually all _that_ horrible to fix this once and for all, and
do proper locking, but it's a bit painful. We have basically three
different cases of stack expansion, and they all work just a bit
differently:
- the common and obvious case is the page fault handling. It's actually
fairly simple and straightforward, except for the fact that we have
something like 24 different versions of it, and you end up in a maze
of twisty little passages, all alike.
- the simplest case is the execve() code that creates a new stack.
There are no real locking concerns because it's all in a private new
VM that hasn't been exposed to anybody, but lockdep still can end up
unhappy if you get it wrong.
- and finally, we have GUP and page pinning, which shouldn't really be
expanding the stack in the first place, but in addition to execve()
we also use it for ptrace(). And debuggers do want to possibly access
memory under the stack pointer and thus need to be able to expand the
stack as a special case.
None of these cases are exactly complicated, but the page fault case in
particular is just repeated slightly differently many many times. And
ia64 in particular has a fairly complicated situation where you can have
both a regular grow-down stack _and_ a special grow-up stack for the
register backing store.
So to make this slightly more manageable, the bulk of this series is to
first create a helper function for the most common page fault case, and
convert all the straightforward architectures to it.
Thus the new 'lock_mm_and_find_vma()' helper function, which ends up
being used by x86, arm, powerpc, mips, riscv, alpha, arc, csky, hexagon,
loongarch, nios2, sh, sparc32, and xtensa. So we not only convert more
than half the architectures, we now have more shared code and avoid some
of those twisty little passages.
And largely due to this common helper function, the full diffstat of
this series ends up deleting more lines than it adds.
That still leaves eight architectures (ia64, m68k, microblaze, openrisc,
parisc, s390, sparc64 and um) that end up doing 'expand_stack()'
manually because they are doing something slightly different from the
normal pattern. Along with the couple of special cases in execve() and
GUP.
So there's a couple of patches that first create 'locked' helper
versions of the stack expansion functions, so that there's a obvious
path forward in the conversion. The execve() case is then actually
pretty simple, and is a nice cleanup from our old "grow-up stackls are
special, because at execve time even they grow down".
The #ifdef CONFIG_STACK_GROWSUP in that code just goes away, because
it's just more straightforward to write out the stack expansion there
manually, instead od having get_user_pages_remote() do it for us in some
situations but not others and have to worry about locking rules for GUP.
And the final step is then to just convert the remaining odd cases to a
new world order where 'expand_stack()' is called with the mmap_lock held
for reading, but where it might drop it and upgrade it to a write, only
to return with it held for reading (in the success case) or with it
completely dropped (in the failure case).
In the process, we remove all the stack expansion from GUP (where
dropping the lock wouldn't be ok without special rules anyway), and add
it in manually to __access_remote_vm() for ptrace().
Thanks to Adrian Glaubitz and Frank Scheiner who tested the ia64 cases.
Everything else here felt pretty straightforward, but the ia64 rules for
stack expansion are really quite odd and very different from everything
else. Also thanks to Vegard Nossum who caught me getting one of those
odd conditions entirely the wrong way around.
Anyway, I think I want to actually move all the stack expansion code to
a whole new file of its own, rather than have it split up between
mm/mmap.c and mm/memory.c, but since this will have to be backported to
the initial maple tree vma introduction anyway, I tried to keep the
patches _fairly_ minimal.
Also, while I don't think it's valid to expand the stack from GUP, the
final patch in here is a "warn if some crazy GUP user wants to try to
expand the stack" patch. That one will be reverted before the final
release, but it's left to catch any odd cases during the merge window
and release candidates.
Reported-by: Ruihan Li <lrh2000@pku.edu.cn>
* branch 'expand-stack':
gup: add warning if some caller would seem to want stack expansion
mm: always expand the stack with the mmap write lock held
execve: expand new process stack manually ahead of time
mm: make find_extend_vma() fail if write lock not held
powerpc/mm: convert coprocessor fault to lock_mm_and_find_vma()
mm/fault: convert remaining simple cases to lock_mm_and_find_vma()
arm/mm: Convert to using lock_mm_and_find_vma()
riscv/mm: Convert to using lock_mm_and_find_vma()
mips/mm: Convert to using lock_mm_and_find_vma()
powerpc/mm: Convert to using lock_mm_and_find_vma()
arm64/mm: Convert to using lock_mm_and_find_vma()
mm: make the page fault mmap locking killable
mm: introduce new 'lock_mm_and_find_vma()' page fault helper
|
||
|
Linus Torvalds
|
77b1a7f7a0 |
- Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in
top-level directories. - Douglas Anderson has added a new "buddy" mode to the hardlockup detector. It permits the detector to work on architectures which cannot provide the required interrupts, by having CPUs periodically perform checks on other CPUs. - Zhen Lei has enhanced kexec's ability to support two crash regions. - Petr Mladek has done a lot of cleanup on the hard lockup detector's Kconfig entries. - And the usual bunch of singleton patches in various places. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJelTAAKCRDdBJ7gKXxA juDkAP0VXWynzkXoojdS/8e/hhi+htedmQ3v2dLZD+vBrctLhAEA7rcH58zAVoWa 2ejqO6wDrRGUC7JQcO9VEjT0nv73UwU= =F293 -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-mm updates from Andrew Morton: - Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level directories - Douglas Anderson has added a new "buddy" mode to the hardlockup detector. It permits the detector to work on architectures which cannot provide the required interrupts, by having CPUs periodically perform checks on other CPUs - Zhen Lei has enhanced kexec's ability to support two crash regions - Petr Mladek has done a lot of cleanup on the hard lockup detector's Kconfig entries - And the usual bunch of singleton patches in various places * tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits) kernel/time/posix-stubs.c: remove duplicated include ocfs2: remove redundant assignment to variable bit_off watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h devres: show which resource was invalid in __devm_ioremap_resource() watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64 watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h watchdog/hardlockup: make the config checks more straightforward watchdog/hardlockup: sort hardlockup detector related config values a logical way watchdog/hardlockup: move SMP barriers from common code to buddy code watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY watchdog/buddy: don't copy the cpumask in watchdog_next_cpu() watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog() watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy() watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick() watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe() watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails ... |
||
|
Linus Torvalds
|
6e17c6de3d |
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs.
- Yosry has also eliminated cgroup's atomic rstat flushing. - Nhat Pham adds the new cachestat() syscall. It provides userspace with the ability to query pagecache status - a similar concept to mincore() but more powerful and with improved usability. - Mel Gorman provides more optimizations for compaction, reducing the prevalence of page rescanning. - Lorenzo Stoakes has done some maintanance work on the get_user_pages() interface. - Liam Howlett continues with cleanups and maintenance work to the maple tree code. Peng Zhang also does some work on maple tree. - Johannes Weiner has done some cleanup work on the compaction code. - David Hildenbrand has contributed additional selftests for get_user_pages(). - Thomas Gleixner has contributed some maintenance and optimization work for the vmalloc code. - Baolin Wang has provided some compaction cleanups, - SeongJae Park continues maintenance work on the DAMON code. - Huang Ying has done some maintenance on the swap code's usage of device refcounting. - Christoph Hellwig has some cleanups for the filemap/directio code. - Ryan Roberts provides two patch series which yield some rationalization of the kernel's access to pte entries - use the provided APIs rather than open-coding accesses. - Lorenzo Stoakes has some fixes to the interaction between pagecache and directio access to file mappings. - John Hubbard has a series of fixes to the MM selftesting code. - ZhangPeng continues the folio conversion campaign. - Hugh Dickins has been working on the pagetable handling code, mainly with a view to reducing the load on the mmap_lock. - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from 128 to 8. - Domenico Cerasuolo has improved the zswap reclaim mechanism by reorganizing the LRU management. - Matthew Wilcox provides some fixups to make gfs2 work better with the buffer_head code. - Vishal Moola also has done some folio conversion work. - Matthew Wilcox has removed the remnants of the pagevec code - their functionality is migrated over to struct folio_batch. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh J0qXCzqaaN8+BuEyLGDVPaXur9KirwY= =B7yQ -----END PGP SIGNATURE----- Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull mm updates from Andrew Morton: - Yosry Ahmed brought back some cgroup v1 stats in OOM logs - Yosry has also eliminated cgroup's atomic rstat flushing - Nhat Pham adds the new cachestat() syscall. It provides userspace with the ability to query pagecache status - a similar concept to mincore() but more powerful and with improved usability - Mel Gorman provides more optimizations for compaction, reducing the prevalence of page rescanning - Lorenzo Stoakes has done some maintanance work on the get_user_pages() interface - Liam Howlett continues with cleanups and maintenance work to the maple tree code. Peng Zhang also does some work on maple tree - Johannes Weiner has done some cleanup work on the compaction code - David Hildenbrand has contributed additional selftests for get_user_pages() - Thomas Gleixner has contributed some maintenance and optimization work for the vmalloc code - Baolin Wang has provided some compaction cleanups, - SeongJae Park continues maintenance work on the DAMON code - Huang Ying has done some maintenance on the swap code's usage of device refcounting - Christoph Hellwig has some cleanups for the filemap/directio code - Ryan Roberts provides two patch series which yield some rationalization of the kernel's access to pte entries - use the provided APIs rather than open-coding accesses - Lorenzo Stoakes has some fixes to the interaction between pagecache and directio access to file mappings - John Hubbard has a series of fixes to the MM selftesting code - ZhangPeng continues the folio conversion campaign - Hugh Dickins has been working on the pagetable handling code, mainly with a view to reducing the load on the mmap_lock - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from 128 to 8 - Domenico Cerasuolo has improved the zswap reclaim mechanism by reorganizing the LRU management - Matthew Wilcox provides some fixups to make gfs2 work better with the buffer_head code - Vishal Moola also has done some folio conversion work - Matthew Wilcox has removed the remnants of the pagevec code - their functionality is migrated over to struct folio_batch * tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits) mm/hugetlb: remove hugetlb_set_page_subpool() mm: nommu: correct the range of mmap_sem_read_lock in task_mem() hugetlb: revert use of page_cache_next_miss() Revert "page cache: fix page_cache_next/prev_miss off by one" mm/vmscan: fix root proactive reclaim unthrottling unbalanced node mm: memcg: rename and document global_reclaim() mm: kill [add|del]_page_to_lru_list() mm: compaction: convert to use a folio in isolate_migratepages_block() mm: zswap: fix double invalidate with exclusive loads mm: remove unnecessary pagevec includes mm: remove references to pagevec mm: rename invalidate_mapping_pagevec to mapping_try_invalidate mm: remove struct pagevec net: convert sunrpc from pagevec to folio_batch i915: convert i915_gpu_error to use a folio_batch pagevec: rename fbatch_count() mm: remove check_move_unevictable_pages() drm: convert drm_gem_put_pages() to use a folio_batch i915: convert shmem_sg_free_table() to use a folio_batch scatterlist: add sg_set_folio() ... |
||
|
Linus Torvalds
|
72dc6db7e3 |
workqueue: Ordered workqueue creation cleanups
For historical reasons, unbound workqueues with max concurrency limit of 1 are considered ordered, even though the concurrency limit hasn't been system-wide for a long time. This creates ambiguity around whether ordered execution is actually required for correctness, which was actually confusing for e.g. btrfs (btrfs updates are being routed through the btrfs tree). There aren't that many users in the tree which use the combination and there are pending improvements to unbound workqueue affinity handling which will make inadvertent use of ordered workqueue a bigger loss. This pull request clarifies the situation for most of them by updating the ones which require ordered execution to use alloc_ordered_workqueue(). There are some conversions being routed through subsystem-specific trees and likely a few stragglers. Once they're all converted, workqueue can trigger a warning on unbound + @max_active==1 usages and eventually drop the implicit ordered behavior. -----BEGIN PGP SIGNATURE----- iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZJoKnA4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGc5SAQDOtjML7Cx9AYzbY5+nYc0wTebRRTXGeOu7A3Xy j50rVgEAjHgvHLIdmeYmVhCeHOSN4q7Wn5AOwaIqZalOhfLyKQk= =hs79 -----END PGP SIGNATURE----- Merge tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull ordered workqueue creation updates from Tejun Heo: "For historical reasons, unbound workqueues with max concurrency limit of 1 are considered ordered, even though the concurrency limit hasn't been system-wide for a long time. This creates ambiguity around whether ordered execution is actually required for correctness, which was actually confusing for e.g. btrfs (btrfs updates are being routed through the btrfs tree). There aren't that many users in the tree which use the combination and there are pending improvements to unbound workqueue affinity handling which will make inadvertent use of ordered workqueue a bigger loss. This clarifies the situation for most of them by updating the ones which require ordered execution to use alloc_ordered_workqueue(). There are some conversions being routed through subsystem-specific trees and likely a few stragglers. Once they're all converted, workqueue can trigger a warning on unbound + @max_active==1 usages and eventually drop the implicit ordered behavior" * tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: rxrpc: Use alloc_ordered_workqueue() to create ordered workqueues net: qrtr: Use alloc_ordered_workqueue() to create ordered workqueues net: wwan: t7xx: Use alloc_ordered_workqueue() to create ordered workqueues dm integrity: Use alloc_ordered_workqueue() to create ordered workqueues media: amphion: Use alloc_ordered_workqueue() to create ordered workqueues scsi: NCR5380: Use default @max_active for hostdata->work_q media: coda: Use alloc_ordered_workqueue() to create ordered workqueues crypto: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues wifi: ath10/11/12k: Use alloc_ordered_workqueue() to create ordered workqueues wifi: mwifiex: Use default @max_active for workqueues wifi: iwlwifi: Use default @max_active for trans_pcie->rba.alloc_wq xen/pvcalls: Use alloc_ordered_workqueue() to create ordered workqueues virt: acrn: Use alloc_ordered_workqueue() to create ordered workqueues net: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues net: thunderx: Use alloc_ordered_workqueue() to create ordered workqueues greybus: Use alloc_ordered_workqueue() to create ordered workqueues powerpc, workqueue: Use alloc_ordered_workqueue() to create ordered workqueues |
||
|
Linus Torvalds
|
6f612579be |
objtool changes for v6.5:
- Build footprint & performance improvements:
- Reduce memory usage with CONFIG_DEBUG_INFO=y
In the worst case of an allyesconfig+CONFIG_DEBUG_INFO=y kernel, DWARF
creates almost 200 million relocations, ballooning objtool's peak heap
usage to 53GB. These patches reduce that to 25GB.
On a distro-type kernel with kernel IBT enabled, they reduce objtool's
peak heap usage from 4.2GB to 2.8GB.
These changes also improve the runtime significantly.
- Debuggability improvements:
- Add the unwind_debug command-line option, for more extend unwinding
debugging output.
- Limit unreachable warnings to once per function
- Add verbose option for disassembling affected functions
- Include backtrace in verbose mode
- Detect missing __noreturn annotations
- Ignore exc_double_fault() __noreturn warnings
- Remove superfluous global_noreturns entries
- Move noreturn function list to separate file
- Add __kunit_abort() to noreturns
- Unwinder improvements:
- Allow stack operations in UNWIND_HINT_UNDEFINED regions
- drm/vmwgfx: Add unwind hints around RBP clobber
- Cleanups:
- Move the x86 entry thunk restore code into thunk functions
- x86/unwind/orc: Use swap() instead of open coding it
- Remove unnecessary/unused variables
- Fixes for modern stack canary handling
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmSaxcoRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1ht5w//f8mBoABct29pS4ib6pDwRZQDoG8fCA7M
+KWjFD1AhX7RsJVEbM4uBUXdSWZD61xxIa8p8LO2jjzE5RyhM+EuNaisKujKqmfj
uQTSnRhIRHMPqqVGK/gQxy1v4+3+12O32XFIJhAPYCp/dpbZJ2yKDsiHjapzZTDy
BM+86hbIyHFmSl5uJcBFHEv6EGhoxwdrrrOxhpao1CqfAUi+uVgamHGwVqx+NtTY
MvOmcy3/0ukHwDLON0MIMu9MSwvnXorD7+RSkYstwAM/k6ao/k78iJ31sOcynpRn
ri0gmfygJsh2bxL4JUlY4ZeTs7PLWkj3i60deePc5u6EyV4JDJ2borUibs5oGoF6
pN0AwbtubLHHhUI/v74B3E6K6ZGvLiEn9dsNTuXsJffD+qU2REb+WLhr4ut+E1Wi
IKWrYh811yBLyOqFEW3XudZTiXSJlgi3eYiCxspEsKw2RIFFt2g6vYcwrIb0Hatw
8R4/jCWk1nc6Wa3RQYsVnhkglAECSKQdDfS7p2e1hNUTjZuess4EEJjSLs8upIQ9
D1bmuUxEzRxVwAZtXYNh0NKe7OtyOrqgsVTQuqxvWXq2CpC7Hqj8piVJWHdBWgHO
0o2OQqjwSrzAtevpAIaYQv9zhPs1hV7CpBgzzqWGXrwJ3vM6YoSRLf0bg+5OkN8I
O4U2xq2OVa8=
=uNnc
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molar:
"Build footprint & performance improvements:
- Reduce memory usage with CONFIG_DEBUG_INFO=y
In the worst case of an allyesconfig+CONFIG_DEBUG_INFO=y kernel,
DWARF creates almost 200 million relocations, ballooning objtool's
peak heap usage to 53GB. These patches reduce that to 25GB.
On a distro-type kernel with kernel IBT enabled, they reduce
objtool's peak heap usage from 4.2GB to 2.8GB.
These changes also improve the runtime significantly.
Debuggability improvements:
- Add the unwind_debug command-line option, for more extend unwinding
debugging output
- Limit unreachable warnings to once per function
- Add verbose option for disassembling affected functions
- Include backtrace in verbose mode
- Detect missing __noreturn annotations
- Ignore exc_double_fault() __noreturn warnings
- Remove superfluous global_noreturns entries
- Move noreturn function list to separate file
- Add __kunit_abort() to noreturns
Unwinder improvements:
- Allow stack operations in UNWIND_HINT_UNDEFINED regions
- drm/vmwgfx: Add unwind hints around RBP clobber
Cleanups:
- Move the x86 entry thunk restore code into thunk functions
- x86/unwind/orc: Use swap() instead of open coding it
- Remove unnecessary/unused variables
Fixes for modern stack canary handling"
* tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/orc: Make the is_callthunk() definition depend on CONFIG_BPF_JIT=y
objtool: Skip reading DWARF section data
objtool: Free insns when done
objtool: Get rid of reloc->rel[a]
objtool: Shrink elf hash nodes
objtool: Shrink reloc->sym_reloc_entry
objtool: Get rid of reloc->jump_table_start
objtool: Get rid of reloc->addend
objtool: Get rid of reloc->type
objtool: Get rid of reloc->offset
objtool: Get rid of reloc->idx
objtool: Get rid of reloc->list
objtool: Allocate relocs in advance for new rela sections
objtool: Add for_each_reloc()
objtool: Don't free memory in elf_close()
objtool: Keep GElf_Rel[a] structs synced
objtool: Add elf_create_section_pair()
objtool: Add mark_sec_changed()
objtool: Fix reloc_hash size
objtool: Consolidate rel/rela handling
...
|
||
|
Linus Torvalds
|
bc6cb4d5bc |
Locking changes for v6.5:
- Introduce cmpxchg128() -- aka. the demise of cmpxchg_double().
The cmpxchg128() family of functions is basically & functionally
the same as cmpxchg_double(), but with a saner interface: instead
of a 6-parameter horror that forced u128 - u64/u64-halves layout
details on the interface and exposed users to complexity,
fragility & bugs, use a natural 3-parameter interface with u128 types.
- Restructure the generated atomic headers, and add
kerneldoc comments for all of the generic atomic{,64,_long}_t
operations. Generated definitions are much cleaner now,
and come with documentation.
- Implement lock_set_cmp_fn() on lockdep, for defining an ordering
when taking multiple locks of the same type. This gets rid of
one use of lockdep_set_novalidate_class() in the bcache code.
- Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended
variable shadowing generating garbage code on Clang on certain
ARM builds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=DsYj
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Introduce cmpxchg128() -- aka. the demise of cmpxchg_double()
The cmpxchg128() family of functions is basically & functionally the
same as cmpxchg_double(), but with a saner interface.
Instead of a 6-parameter horror that forced u128 - u64/u64-halves
layout details on the interface and exposed users to complexity,
fragility & bugs, use a natural 3-parameter interface with u128
types.
- Restructure the generated atomic headers, and add kerneldoc comments
for all of the generic atomic{,64,_long}_t operations.
The generated definitions are much cleaner now, and come with
documentation.
- Implement lock_set_cmp_fn() on lockdep, for defining an ordering when
taking multiple locks of the same type.
This gets rid of one use of lockdep_set_novalidate_class() in the
bcache code.
- Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended variable
shadowing generating garbage code on Clang on certain ARM builds.
* tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
locking/atomic: scripts: fix ${atomic}_dec_if_positive() kerneldoc
percpu: Fix self-assignment of __old in raw_cpu_generic_try_cmpxchg()
locking/atomic: treewide: delete arch_atomic_*() kerneldoc
locking/atomic: docs: Add atomic operations to the driver basic API documentation
locking/atomic: scripts: generate kerneldoc comments
docs: scripts: kernel-doc: accept bitwise negation like ~@var
locking/atomic: scripts: simplify raw_atomic*() definitions
locking/atomic: scripts: simplify raw_atomic_long*() definitions
locking/atomic: scripts: split pfx/name/sfx/order
locking/atomic: scripts: restructure fallback ifdeffery
locking/atomic: scripts: build raw_atomic_long*() directly
locking/atomic: treewide: use raw_atomic*_<op>()
locking/atomic: scripts: add trivial raw_atomic*_<op>()
locking/atomic: scripts: factor out order template generation
locking/atomic: scripts: remove leftover "${mult}"
locking/atomic: scripts: remove bogus order parameter
locking/atomic: xtensa: add preprocessor symbols
locking/atomic: x86: add preprocessor symbols
locking/atomic: sparc: add preprocessor symbols
locking/atomic: sh: add preprocessor symbols
...
|
||
|
Masahiro Yamada
|
54a11654de |
powerpc: remove checks for binutils older than 2.25
Commit
|
||
|
Naveen N Rao
|
25ea739ea1 |
powerpc: Fail build if using recordmcount with binutils v2.37
binutils v2.37 drops unused section symbols, which prevents recordmcount from capturing mcount locations in sections that have no non-weak symbols. This results in a build failure with a message such as: Cannot find symbol for section 12: .text.perf_callchain_kernel. kernel/events/callchain.o: failed The change to binutils was reverted for v2.38, so this behavior is specific to binutils v2.37: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=c09c8b42021180eee9495bd50d8b35e683d3901b Objtool is able to cope with such sections, so this issue is specific to recordmcount. Fail the build and print a warning if binutils v2.37 is detected and if we are using recordmcount. Cc: stable@vger.kernel.org Suggested-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230530061436.56925-1-naveen@kernel.org |
||
|
Linus Torvalds
|
7cffdbe360 |
Updates for the x86 boot process:
- Initialize FPU late.
Right now FPU is initialized very early during boot. There is no real
requirement to do so. The only requirement is to have it done before
alternatives are patched.
That's done in check_bugs() which does way more than what the function
name suggests.
So first rename check_bugs() to arch_cpu_finalize_init() which makes it
clear what this is about.
Move the invocation of arch_cpu_finalize_init() earlier in
start_kernel() as it has to be done before fork_init() which needs to
know the FPU register buffer size.
With those prerequisites the FPU initialization can be moved into
arch_cpu_finalize_init(), which removes it from the early and fragile
part of the x86 bringup.
-----BEGIN PGP SIGNATURE-----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=yxMj
-----END PGP SIGNATURE-----
Merge tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Thomas Gleixner:
"Initialize FPU late.
Right now FPU is initialized very early during boot. There is no real
requirement to do so. The only requirement is to have it done before
alternatives are patched.
That's done in check_bugs() which does way more than what the function
name suggests.
So first rename check_bugs() to arch_cpu_finalize_init() which makes
it clear what this is about.
Move the invocation of arch_cpu_finalize_init() earlier in
start_kernel() as it has to be done before fork_init() which needs to
know the FPU register buffer size.
With those prerequisites the FPU initialization can be moved into
arch_cpu_finalize_init(), which removes it from the early and fragile
part of the x86 bringup"
* tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mem_encrypt: Unbreak the AMD_MEM_ENCRYPT=n build
x86/fpu: Move FPU initialization into arch_cpu_finalize_init()
x86/fpu: Mark init functions __init
x86/fpu: Remove cpuinfo argument from init functions
x86/init: Initialize signal frame size late
init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init()
init: Invoke arch_cpu_finalize_init() earlier
init: Remove check_bugs() leftovers
um/cpu: Switch to arch_cpu_finalize_init()
sparc/cpu: Switch to arch_cpu_finalize_init()
sh/cpu: Switch to arch_cpu_finalize_init()
mips/cpu: Switch to arch_cpu_finalize_init()
m68k/cpu: Switch to arch_cpu_finalize_init()
loongarch/cpu: Switch to arch_cpu_finalize_init()
ia64/cpu: Switch to arch_cpu_finalize_init()
ARM: cpu: Switch to arch_cpu_finalize_init()
x86/cpu: Switch to arch_cpu_finalize_init()
init: Provide arch_cpu_finalize_init()
|
||
|
Linus Torvalds
|
a0433f8cae |
for-6.5/block-2023-06-23
-----BEGIN PGP SIGNATURE-----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=zP4Y
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
|
||
|
Linus Torvalds
|
64bf6ae93e |
v6.5/vfs.misc
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZJU4SwAKCRCRxhvAZXjc
ojOTAP9gT/z1gasIf8OwDHb4inZGnVpHh2ApKLvgMXH6ICtwRgD+OBtOcf438Lx1
cpFSTVJlh21QXMOOXWHe/LRUV2kZ5wI=
=zdfx
-----END PGP SIGNATURE-----
Merge tag 'v6.5/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Miscellaneous features, cleanups, and fixes for vfs and individual fs
Features:
- Use mode 0600 for file created by cachefilesd so it can be run by
unprivileged users. This aligns them with directories which are
already created with mode 0700 by cachefilesd
- Reorder a few members in struct file to prevent some false sharing
scenarios
- Indicate that an eventfd is used a semaphore in the eventfd's
fdinfo procfs file
- Add a missing uapi header for eventfd exposing relevant uapi
defines
- Let the VFS protect transitions of a superblock from read-only to
read-write in addition to the protection it already provides for
transitions from read-write to read-only. Protecting read-only to
read-write transitions allows filesystems such as ext4 to perform
internal writes, keeping writers away until the transition is
completed
Cleanups:
- Arnd removed the architecture specific arch_report_meminfo()
prototypes and added a generic one into procfs.h. Note, we got a
report about a warning in amdpgpu codepaths that suggested this was
bisectable to this change but we concluded it was a false positive
- Remove unused parameters from split_fs_names()
- Rename put_and_unmap_page() to unmap_and_put_page() to let the name
reflect the order of the cleanup operation that has to unmap before
the actual put
- Unexport buffer_check_dirty_writeback() as it is not used outside
of block device aops
- Stop allocating aio rings from highmem
- Protecting read-{only,write} transitions in the VFS used open-coded
barriers in various places. Replace them with proper little helpers
and document both the helpers and all barrier interactions involved
when transitioning between read-{only,write} states
- Use flexible array members in old readdir codepaths
Fixes:
- Use the correct type __poll_t for epoll and eventfd
- Replace all deprecated strlcpy() invocations, whose return value
isn't checked with an equivalent strscpy() call
- Fix some kernel-doc warnings in fs/open.c
- Reduce the stack usage in jffs2's xattr codepaths finally getting
rid of this: fs/jffs2/xattr.c:887:1: error: the frame size of 1088
bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
royally annoying compilation warning
- Use __FMODE_NONOTIFY instead of FMODE_NONOTIFY where an int and not
fmode_t is required to avoid fmode_t to integer degradation
warnings
- Create coredumps with O_WRONLY instead of O_RDWR. There's a long
explanation in that commit how O_RDWR is actually a bug which we
found out with the help of Linus and git archeology
- Fix "no previous prototype" warnings in the pipe codepaths
- Add overflow calculations for remap_verify_area() as a signed
addition overflow could be triggered in xfstests
- Fix a null pointer dereference in sysv
- Use an unsigned variable for length calculations in jfs avoiding
compilation warnings with gcc 13
- Fix a dangling pipe pointer in the watch queue codepath
- The legacy mount option parser provided as a fallback by the VFS
for filesystems not yet converted to the new mount api did prefix
the generated mount option string with a leading ',' causing issues
for some filesystems
- Fix a repeated word in a comment in fs.h
- autofs: Update the ctime when mtime is updated as mandated by
POSIX"
* tag 'v6.5/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
readdir: Replace one-element arrays with flexible-array members
fs: Provide helpers for manipulating sb->s_readonly_remount
fs: Protect reconfiguration of sb read-write from racing writes
eventfd: add a uapi header for eventfd userspace APIs
autofs: set ctime as well when mtime changes on a dir
eventfd: show the EFD_SEMAPHORE flag in fdinfo
fs/aio: Stop allocating aio rings from HIGHMEM
fs: Fix comment typo
fs: unexport buffer_check_dirty_writeback
fs: avoid empty option when generating legacy mount string
watch_queue: prevent dangling pipe pointer
fs.h: Optimize file struct to prevent false sharing
highmem: Rename put_and_unmap_page() to unmap_and_put_page()
cachefiles: Allow the cache to be non-root
init: remove unused names parameter in split_fs_names()
jfs: Use unsigned variable for length calculations
fs/sysv: Null check to prevent null-ptr-deref bug
fs: use UB-safe check for signed addition overflow in remap_verify_area
procfs: consolidate arch_report_meminfo declaration
fs: pipe: reveal missing function protoypes
...
|
||
|
Gaurav Batra
|
d61cd13e73 |
powerpc/iommu: TCEs are incorrectly manipulated with DLPAR add/remove of memory
When memory is dynamically added/removed, iommu_mem_notifier() is invoked. This routine traverses through all the DMA windows (DDW only, not default windows) to add/remove "direct" TCE mappings. The routines for this purpose are tce_clearrange_multi_pSeriesLP() and tce_clearrange_multi_pSeriesLP(). Both these routines are designed for Direct mapped DMA windows only. The issue is that there could be some DMA windows in the list which are not "direct" mapped. Calling these routines will either, 1) remove some dynamically mapped TCEs, Or 2) try to add TCEs which are out of bounds and HCALL returns H_PARAMETER Here are the side affects when these routines are incorrectly invoked for "dynamically" mapped DMA windows. tce_setrange_multi_pSeriesLP() This adds direct mapped TCEs. Now, this could invoke HCALL to add TCEs with out-of-bound range. In this scenario, HCALL will return H_PARAMETER and DLAR ADD of memory will fail. tce_clearrange_multi_pSeriesLP() This will remove range of TCEs. The TCE range that is calculated, depending on the memory range being added, could infact be mapping some other memory address (for dynamic DMA window scenario). This will wipe out those TCEs. The solution is for iommu_mem_notifier() to only invoke these routines for "direct" mapped DMA windows. Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com> Reviewed-by: Brian King <brking@linux.vnet.ibm.com> [mpe: Initialise direct at allocation time in ddw_list_new_entry()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230613171641.15641-1-gbatra@linux.vnet.ibm.com |
||
|
Linus Torvalds
|
2cd76c50d0 |
powerpc/mm: convert coprocessor fault to lock_mm_and_find_vma()
This is one of the simple cases, except there's no pt_regs pointer. Which is fine, as lock_mm_and_find_vma() is set up to work fine with a NULL pt_regs. Powerpc already enabled LOCK_MM_AND_FIND_VMA for the main CPU faulting, so we can just use the helper without any extra work. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michael Ellerman
|
e6fe228c4f |
powerpc/mm: Convert to using lock_mm_and_find_vma()
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Douglas Anderson
|
df8b78e163 |
powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h
The powerpc architecture was the only one that defined arch_trigger_cpumask_backtrace() in asm/nmi.h instead of asm/irq.h. Move it to be consistent. This fixes compile time errors introduced by commit |
||
|
Andrew Morton
|
63773d2b59 | Merge mm-hotfixes-stable into mm-stable to pick up depended-upon changes. | ||
|
Linus Torvalds
|
e7758c0ddb |
powerpc fixes for 6.4 #5
- Disable IRQs when switching mm in exit_lazy_flush_tlb() called from exit_mmap() Thanks to: Nicholas Piggin, Sachin Sant. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmSUMzkTHG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgG1AD/9TostrqD9/wSMlZEhvmT1XWB4gSnuS N0uhl2Vd3DC8w/S6OQZzpEmq0j7kjSkS4J7FkV5gOWWuP2+nesEqMMeoUU7oznhT U8IDGLkQJ3oQcV8F0Hjk63VnPn8x1YE+GwsRA6cm/wKJl5P6EL3Zip5ETBBogrJx G/rozfyHjs4Er7Y7WLZnVqo6Q4NcO42zB7YiK1iRY2/V+so6EH7FeDGgdKgPjXhS PP9K5kubFbwFxI0OMJ8XjTULXxtxK9UV7tksqbow66pbA+n5r71sXelQ7f+YiOP7 YJt6E25LQxVl1SsyYXrX7ZIsfcOVtLI+w1LK1uSlTjoLWO9phs5cAVqNtKFMkYdp VNywqWHjH79hWaZ7HjwlP0PFfsy4UJsuqvHOGRBLN/yZgSBxIG9CuRgqeZ3LPz/7 UETD9IaeGCkj0NCfcyEuT7pLIt8AsL6f8ojS2GlRi1Kws0qV61v5RqeYFKJYyea1 Mcy23Q1peT9Kp8yNynNf1ccKVcsUkPfuzVTsACW2EfinE0k/JxPtINnq8OypGQnO +EDCQ8DmLTJtVknks8nSBpIxIh4e6Q843VHJGyF3GPtPYpJvbMVHWquYPwngFPVs j1hhLo0zbpUql108WzHweqNE/3fJHumcyn/qxKX7s+bQXYtDXMeK1E546lX8kz2c I64vSFw/BG/gwA== =JI5V -----END PGP SIGNATURE----- Merge tag 'powerpc-6.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: - Disable IRQs when switching mm in exit_lazy_flush_tlb() called from exit_mmap() Thanks to Nicholas Piggin and Sachin Sant. * tag 'powerpc-6.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s/radix: Fix exit lazy tlb mm switch with irqs enabled |
||
|
Timothy Pearson
|
bfd8d98921 |
powerpc/iommu: Only build sPAPR access functions on pSeries
and PowerNV A build failure with CONFIG_HAVE_PCI=y set without PSERIES or POWERNV set was caught by the random configuration checker. Guard the sPAPR specific IOMMU functions on CONFIG_PPC_PSERIES || CONFIG_PPC_POWERNV. Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/2015925968.3546872.1685990936823.JavaMail.zimbra@raptorengineeringinc.com |
||
|
Rohan McLure
|
331e2cad6d |
powerpc: powernv: Annotate data races in opal events
The kopald thread handles opal events as they appear, but by polling a static bit-vector in last_outstanding_events. Annotate these data races accordingly. We are not at risk of missing events, but use of READ_ONCE, WRITE_ONCE will assist readers in seeing that kopald only consumes the events it is aware of when it is scheduled. Also removes extraneous KCSAN warnings. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230510033117.1395895-10-rmclure@linux.ibm.com |
||
|
Rohan McLure
|
86dacd967b |
powerpc: Mark writes registering ipi to host cpu through kvm and polling
Mark writes to hypervisor ipi state so that KCSAN recognises these
asynchronous issue of kvmppc_{set,clear}_host_ipi to be intended, with
atomic writes. Mark asynchronous polls to this variable in
kvm_ppc_read_one_intr().
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230510033117.1395895-9-rmclure@linux.ibm.com
|
||
|
Rohan McLure
|
8608f14b49 |
powerpc: Annotate accesses to ipi message flags
IPI message flags are observed and consequently consumed in the smp_ipi_demux_relaxed function, which handles these message sources until it observes none more arriving. Mark the checked loop guard with READ_ONCE, to signal to KCSAN that the read is known to be volatile, and that non-determinism is expected. Mark write for message source in smp_muxed_ipi_set_message(). Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230510033117.1395895-8-rmclure@linux.ibm.com |
||
|
Rohan McLure
|
b0c5b4f1ee |
powerpc: powernv: Fix KCSAN datarace warnings on idle_state contention
The idle_state entry in the PACA on PowerNV features a bit which is atomically tested and set through ldarx/stdcx. to be used as a spinlock. This lock then guards access to other bit fields of idle_state. KCSAN cannot differentiate between any of these bitfield accesses as they all are implemented by 8-byte store/load instructions, thus cores contending on the bit-lock appear to data race with modifications to idle_state. Separate the bit-lock entry from the data guarded by the lock to avoid the possibility of data races being detected by KCSAN. Suggested-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230510033117.1395895-7-rmclure@linux.ibm.com |
||
|
Rohan McLure
|
be286b8637 |
powerpc: Mark [h]ssr_valid accesses in check_return_regs_valid
Checks to see if the [H]SRR registers have been clobbered by (soft) NMI interrupts imply the possibility for a data race on the [h]srr_valid entries in the PACA. Annotate accesses to these fields with READ_ONCE, removing the need for the barrier. The diagnostic can use plain-access reads and writes, but annotate with data_race. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230510033117.1395895-5-rmclure@linux.ibm.com |
||
|
Rohan McLure
|
6f3136326e |
powerpc: qspinlock: Enforce qnode writes prior to publishing to queue
Annotate the release barrier and memory clobber (in effect, producing a compiler barrier) in the publish_tail_cpu call. These barriers have the effect of ensuring that qnode attributes are all written to prior to publish the node to the waitqueue. Even while the initial write to the 'locked' attribute is guaranteed to terminate prior to the node being visible, KCSAN still complains that the write is reorderable by the compiler. Issue a kcsan_release() to inform KCSAN of the release barrier contained in publish_tail_cpu(). Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230510033117.1395895-3-rmclure@linux.ibm.com |
||
|
Rohan McLure
|
03d44ee80e |
powerpc: qspinlock: Mark accesses to qnode lock checks
The powerpc implementation of qspinlocks will both poll and spin on the bitlock guarding a qnode. Mark these accesses with READ_ONCE to convey to KCSAN that polling is intentional here. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230510033117.1395895-2-rmclure@linux.ibm.com |
||
|
Joel Stanley
|
98e61df570 |
powerpc/powernv/pci: Remove last IODA1 defines
Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230613045202.294451-4-joel@jms.id.au |
||
|
Joel Stanley
|
326b3f8c6e |
powerpc/powernv/pci: Remove MVE code
With IODA1 support gone the OPAL calls to set MVE are dead code. Remove them. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230613045202.294451-3-joel@jms.id.au |