ext4_freeze() and ext4_unfreeze() checks for sb_rdonly(). However this
check is pointless as VFS already checks for read-only filesystem before
calling filesystem specific methods. Remove the pointless checks.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
journalling, and block allocator subsystems. Also improve performance
for parallel DIO overwrites.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmSaIWAACgkQ8vlZVpUN
gaODEAf9GLk68DvU9iOhgJ1p/lMIqtbY0vvB1aeiQg7Z99mk/Vc//R5qQvtO2oN5
9G4OMSGKoUO0x9OlvDIw6za1BsE1pGHyBLmei7PO1JpHop6b6hKj+WQVPWb43v15
TI0vIkWzwJI2eIxsTqvpMkgwZ3aNL9c52xFyjwk/6lAsw4y2wxEls/NZhhE2tAXF
w/RFmI9RC/AZy1JX3VeruzeiSvAq+JAnsW8iNIoN5nBvWU7yXLA3b4mcoWWrCQ5E
sKqOkhTeobhYsAie6dxGhri/JrL1HwPOpJ8SWWmrlLWXoMVx1rXxW3OnxIAEl9sz
05n7Z+6LvI6aEk+rnjCqt4Z1cpIIEA==
=cAq/
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Various cleanups and bug fixes in ext4's extent status tree,
journalling, and block allocator subsystems.
Also improve performance for parallel DIO overwrites"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (55 commits)
ext4: avoid updating the superblock on a r/o mount if not needed
jbd2: skip reading super block if it has been verified
ext4: fix to check return value of freeze_bdev() in ext4_shutdown()
ext4: refactoring to use the unified helper ext4_quotas_off()
ext4: turn quotas off if mount failed after enabling quotas
ext4: update doc about journal superblock description
ext4: add journal cycled recording support
jbd2: continue to record log between each mount
jbd2: remove j_format_version
jbd2: factor out journal initialization from journal_get_superblock()
jbd2: switch to check format version in superblock directly
jbd2: remove unused feature macros
ext4: ext4_put_super: Remove redundant checking for 'sbi->s_journal_bdev'
ext4: Fix reusing stale buffer heads from last failed mounting
ext4: allow concurrent unaligned dio overwrites
ext4: clean up mballoc criteria comments
ext4: make ext4_zeroout_es() return void
ext4: make ext4_es_insert_extent() return void
ext4: make ext4_es_insert_delayed_block() return void
ext4: make ext4_es_remove_extent() return void
...
This was noticed by a user who noticied that the mtime of a file
backing a loopback device was getting bumped when the loopback device
is mounted read/only. Note: This doesn't show up when doing a
loopback mount of a file directly, via "mount -o ro /tmp/foo.img
/mnt", since the loop device is set read-only when mount automatically
creates loop device. However, this is noticeable for a LUKS loop
device like this:
% cryptsetup luksOpen /tmp/foo.img test
% mount -o ro /dev/loop0 /mnt ; umount /mnt
or, if LUKS is not in use, if the user manually creates the loop
device like this:
% losetup /dev/loop0 /tmp/foo.img
% mount -o ro /dev/loop0 /mnt ; umount /mnt
The modified mtime causes rsync to do a rolling checksum scan of the
file on the local and remote side, incrementally increasing the time
to rsync the not-modified-but-touched image file.
Fixes: eee00237fa ("ext4: commit super block if fs record error when journal record without error")
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/ZIauBR7YiV3rVAHL@glitch
Reported-by: Sean Greenslade <sean@seangreenslade.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Rename ext4_quota_off_umount() to ext4_quotas_off(), and add type
parameter to replace open code in ext4_enable_quotas().
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230327141630.156875-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Always enable 'JBD2_CYCLE_RECORD' journal option on ext4, letting the
jbd2 continue to record new journal transactions from the recovered
journal head or the checkpointed transactions in the previous mount.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230322013353.1843306-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As discussed in [1], 'sbi->s_journal_bdev != sb->s_bdev' will always
become true if sbi->s_journal_bdev exists. Filesystem block device and
journal block device are both opened with 'FMODE_EXCL' mode, so these
two devices can't be same one. Then we can remove the redundant checking
'sbi->s_journal_bdev != sb->s_bdev' if 'sbi->s_journal_bdev' exists.
[1] https://lore.kernel.org/lkml/f86584f6-3877-ff18-47a1-2efaa12d18b2@huawei.com/
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230315013128.3911115-3-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Following process makes ext4 load stale buffer heads from last failed
mounting in a new mounting operation:
mount_bdev
ext4_fill_super
| ext4_load_and_init_journal
| ext4_load_journal
| jbd2_journal_load
| load_superblock
| journal_get_superblock
| set_buffer_verified(bh) // buffer head is verified
| jbd2_journal_recover // failed caused by EIO
| goto failed_mount3a // skip 'sb->s_root' initialization
deactivate_locked_super
kill_block_super
generic_shutdown_super
if (sb->s_root)
// false, skip ext4_put_super->invalidate_bdev->
// invalidate_mapping_pages->mapping_evict_folio->
// filemap_release_folio->try_to_free_buffers, which
// cannot drop buffer head.
blkdev_put
blkdev_put_whole
if (atomic_dec_and_test(&bdev->bd_openers))
// false, systemd-udev happens to open the device. Then
// blkdev_flush_mapping->kill_bdev->truncate_inode_pages->
// truncate_inode_folio->truncate_cleanup_folio->
// folio_invalidate->block_invalidate_folio->
// filemap_release_folio->try_to_free_buffers will be skipped,
// dropping buffer head is missed again.
Second mount:
ext4_fill_super
ext4_load_and_init_journal
ext4_load_journal
ext4_get_journal
jbd2_journal_init_inode
journal_init_common
bh = getblk_unmovable
bh = __find_get_block // Found stale bh in last failed mounting
journal->j_sb_buffer = bh
jbd2_journal_load
load_superblock
journal_get_superblock
if (buffer_verified(bh))
// true, skip journal->j_format_version = 2, value is 0
jbd2_journal_recover
do_one_pass
next_log_block += count_tags(journal, bh)
// According to journal_tag_bytes(), 'tag_bytes' calculating is
// affected by jbd2_has_feature_csum3(), jbd2_has_feature_csum3()
// returns false because 'j->j_format_version >= 2' is not true,
// then we get wrong next_log_block. The do_one_pass may exit
// early whenoccuring non JBD2_MAGIC_NUMBER in 'next_log_block'.
The filesystem is corrupted here, journal is partially replayed, and
new journal sequence number actually is already used by last mounting.
The invalidate_bdev() can drop all buffer heads even racing with bare
reading block device(eg. systemd-udev), so we can fix it by invalidating
bdev in error handling path in __ext4_fill_super().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217171
Fixes: 25ed6e8a54 ("jbd2: enable journal clients to enable v2 checksumming")
Cc: stable@vger.kernel.org # v3.5
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230315013128.3911115-2-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Before this patch, the call stack in ext4_run_li_request is as follows:
/*
* nr = no. of BGs we want to fetch (=s_mb_prefetch)
* prefetch_ios = no. of BGs not uptodate after
* ext4_read_block_bitmap_nowait()
*/
next_group = ext4_mb_prefetch(sb, group, nr, prefetch_ios);
ext4_mb_prefetch_fini(sb, next_group prefetch_ios);
ext4_mb_prefetch_fini() will only try to initialize buddies for BGs in
range [next_group - prefetch_ios, next_group). This is incorrect since
sometimes (prefetch_ios < nr), which causes ext4_mb_prefetch_fini() to
incorrectly ignore some of the BGs that might need initialization. This
issue is more notable now with the previous patch enabling "fetching" of
BLOCK_UNINIT BGs which are marked buffer_uptodate by default.
Fix this by passing nr to ext4_mb_prefetch_fini() instead of
prefetch_ios so that it considers the right range of groups.
Similarly, make sure we don't pass nr=0 to ext4_mb_prefetch_fini() in
ext4_mb_regular_allocator() since we might have prefetched BLOCK_UNINIT
groups that would need buddy initialization.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/05e648ae04ec5b754207032823e9c1de9a54f87a.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----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=zP4Y
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
ext4_blkdev_remove() passes a wrong holder pointer to blkdev_put() which
triggers a warning there. Fix it.
Fixes: 2736e8eeb0 ("block: use the holder as indication for exclusive opens")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230622165107.13687-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stripe is misused in block unit and in cluster unit in different code
paths. User awared of stripe maybe not awared of bigalloc feature, so
treat stripe only in block unit to fix this.
Besides, it's hard to get stripe aligned blocks (start and length are both
aligned with stripe) if stripe is not aligned with cluster, just disable
stripe and alert user in this case to simpfy the code and avoid
unnecessary work to get stripe aligned blocks which likely to be failed.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230603150327.3596033-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The only overlap between the block open flags mapped into the fmode_t and
other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new
blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and
->ioctl and stop abusing fmode_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current interface for exclusive opens is rather confusing as it
requires both the FMODE_EXCL flag and a holder. Remove the need to pass
FMODE_EXCL and just key off the exclusive open off a non-NULL holder.
For blkdev_put this requires adding the holder argument, which provides
better debug checking that only the holder actually releases the hold,
but at the same time allows removing the now superfluous mode argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement a set of holder_ops that shut down the file system when the
block device used as log device is removed undeneath the file system.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Wire up the shutdown method to shut down the file system when the
underlying block device is marked dead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new blk_holder_ops structure, which is passed to blkdev_get_by_* and
installed in the block_device for exclusive claims. It will be used to
allow the block layer to call back into the user of the block device for
thing like notification of a removed device or a device resize.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In commit a44be64bbe ("ext4: don't clear SB_RDONLY when remounting
r/w until quota is re-enabled") we defer clearing tyhe SB_RDONLY flag
in struct super. However, we didn't defer when we checked sb_rdonly()
to determine the lazy itable init thread should be enabled, with the
next result that the lazy inode table initialization would not be
properly started. This can cause generic/231 to fail in ext4's
nojournal mode.
Fix this by moving when we decide to start or stop the lazy itable
init thread to after we clear the SB_RDONLY flag when we are
remounting the file system read/write.
Fixes a44be64bbe ("ext4: don't clear SB_RDONLY when remounting r/w until...")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230527035729.1001605-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Whether the file system is mounted read-only or read/write is more
important than the quota mode, which we are already printing. Add the
ro vs r/w indication since this can be helpful in debugging problems
from the console log.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If there are failures while changing the mount options in
__ext4_remount(), we need to restore the old mount options.
This commit fixes two problem. The first is there is a chance that we
will free the old quota file names before a potential failure leading
to a use-after-free. The second problem addressed in this commit is
if there is a failed read/write to read-only transition, if the quota
has already been suspended, we need to renable quota handling.
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230506142419.984260-2-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When a file system currently mounted read/only is remounted
read/write, if we clear the SB_RDONLY flag too early, before the quota
is initialized, and there is another process/thread constantly
attempting to create a directory, it's possible to trigger the
WARN_ON_ONCE(dquot_initialize_needed(inode));
in ext4_xattr_block_set(), with the following stack trace:
WARNING: CPU: 0 PID: 5338 at fs/ext4/xattr.c:2141 ext4_xattr_block_set+0x2ef2/0x3680
RIP: 0010:ext4_xattr_block_set+0x2ef2/0x3680 fs/ext4/xattr.c:2141
Call Trace:
ext4_xattr_set_handle+0xcd4/0x15c0 fs/ext4/xattr.c:2458
ext4_initxattrs+0xa3/0x110 fs/ext4/xattr_security.c:44
security_inode_init_security+0x2df/0x3f0 security/security.c:1147
__ext4_new_inode+0x347e/0x43d0 fs/ext4/ialloc.c:1324
ext4_mkdir+0x425/0xce0 fs/ext4/namei.c:2992
vfs_mkdir+0x29d/0x450 fs/namei.c:4038
do_mkdirat+0x264/0x520 fs/namei.c:4061
__do_sys_mkdirat fs/namei.c:4076 [inline]
__se_sys_mkdirat fs/namei.c:4074 [inline]
__x64_sys_mkdirat+0x89/0xa0 fs/namei.c:4074
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230506142419.984260-1-tytso@mit.edu
Reported-by: syzbot+6385d7d3065524c5ca6d@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=6513f6cb5cd6b5fc9f37e3bb70d273b94be9c34c
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously, ext4_get_group_info() would treat an invalid group number
as BUG(), since in theory it should never happen. However, if a
malicious attaker (or fuzzer) modifies the superblock via the block
device while it is the file system is mounted, it is possible for
s_first_data_block to get set to a very large number. In that case,
when calculating the block group of some block number (such as the
starting block of a preallocation region), could result in an
underflow and very large block group number. Then the BUG_ON check in
ext4_get_group_info() would fire, resutling in a denial of service
attack that can be triggered by root or someone with write access to
the block device.
For a quality of implementation perspective, it's best that even if
the system administrator does something that they shouldn't, that it
will not trigger a BUG. So instead of BUG'ing, ext4_get_group_info()
will call ext4_error and return NULL. We also add fallback code in
all of the callers of ext4_get_group_info() that it might NULL.
Also, since ext4_get_group_info() was already borderline to be an
inline function, un-inline it. The results in a next reduction of the
compiled text size of ext4 by roughly 2k.
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230430154311.579720-2-tytso@mit.edu
Reported-by: syzbot+e2efa3efc15a1c9e95c3@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=69b28112e098b070f639efb356393af3ffec4220
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmROracACgkQ8vlZVpUN
gaPqLQf/ZvzvspL4o3SNsHE/M2tKNBVY/z/vsfmAZwMgrGoK5qCkDsNA7c7+oUwE
xjiHiVHOaYjJVWwkdODAwe7xNbWB6FoKptBaBi89fAyibMY/N7BZ8rad69NQTvyc
JbKjorvEBc+qgsUEt2+ZpMogN9KHlVh3NJwlovesmucQtg2gWLKs8wrxW2bC7uAh
2uR9GWUnhDrs6jHbjHkG3/lgB0aS0StLRxfsbchjZvCsniTDZymLmmgkA1ln17ce
6iRg2ESjYUryPX09YFtUuQVvObtUTM+z8DzwyQuAJ4VfmdoPA4L6mpdqzPGFuKQc
gJrLSB8VZJDvPoGjaHZ+Qdl1tHlFRw==
=2SEf
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Some ext4 regression and bug fixes"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: clean up error handling in __ext4_fill_super()
ext4: reflect error codes from ext4_multi_mount_protect() to its callers
ext4: fix lost error code reporting in __ext4_fill_super()
ext4: fix unused iterator variable warnings
ext4: fix use-after-free read in ext4_find_extent for bigalloc + inline
ext4: fix i_disksize exceeding i_size problem in paritally written case
There were two ways to return an error code; one was via setting the
'err' variable, and the second, if err was zero, was via the 'ret'
variable. This was both confusing and fragile, and when code was
factored out of __ext4_fill_super(), some of the error codes returned
by the original code was replaced by -EINVAL, and in one case, the
error code was placed by 0, triggering a kernel null pointer
dereference.
Clean this up by removing the 'ret' variable, leaving only one way to
set the error code to be returned, and restore the errno codes that
were returned via the the mount system call as they were before we
started refactoring __ext4_fill_super().
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
This will allow more fine-grained errno codes to be returned by the
mount system call.
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When code was factored out of __ext4_fill_super() into
ext4_percpu_param_init() the error return was discarded. This meant
that it was possible for __ext4_fill_super() to return zero,
indicating success, without the struct super getting completely filled
in, leading to a potential NULL pointer dereference.
Reported-by: syzbot+bbf0f9a213c94f283a5c@syzkaller.appspotmail.com
Fixes: 1f79467c8a ("ext4: factor out ext4_percpu_param_init() ...")
Link: https://syzkaller.appspot.com/bug?id=6dac47d5e58af770c0055f680369586ec32e144c
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
When CONFIG_QUOTA is disabled, there are warnings around unused iterator
variables:
fs/ext4/super.c: In function 'ext4_put_super':
fs/ext4/super.c:1262:13: error: unused variable 'i' [-Werror=unused-variable]
1262 | int i, err;
| ^
fs/ext4/super.c: In function '__ext4_fill_super':
fs/ext4/super.c:5200:22: error: unused variable 'i' [-Werror=unused-variable]
5200 | unsigned int i;
| ^
cc1: all warnings being treated as errors
The kernel has updated to GNU11, allowing the variables to be declared
within the for loop. Do so to clear up the warnings.
Fixes: dcbf87589d ("ext4: factor out ext4_flex_groups_free()")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230420-ext4-unused-variables-super-c-v1-1-138b6db6c21c@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* The data=journal writepath has been significantly cleaned up and
simplified, and reduces a large number of data=journal special cases
by Jan Kara.
* Ojaswin Muhoo has replaced linked list used to track extents that
have been used for inode preallocation with a red-black tree in the
multi-block allocator. This improves performance for workloads
which do a large number of random allocating writes.
* Thanks to Kemeng Shi for a lot of cleanup and bug fixes in the
multi-block allocator.
* Matthew wilcox has converted the code paths for reading and writing
ext4 pages to use folios.
* Jason Yan has continued to factor out ext4_fill_super() into smaller
functions for improve ease of maintenance and comprehension.
* Josh Triplett has created an uapi header for ext4 userspace API's.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmRHS3IACgkQ8vlZVpUN
gaNN7AgAnFiWfk4UqKpBsUL5iQKJgf2K4tjlNXgPd6ghNns0IdFEyeWSHhr6KLv/
SQeoMMyiWaUcTvZs9DokD8U/9M1ELPUiE9W5c9GxJjM86SXp8BlLYSZTiRoNHzGJ
noQpvikj4qTRviK0rA3q5ICTP2eh1ECHMFJy2wcsZQgwnBelUejQHsTGtOwSvFWF
8wMdfuVtAFDZJjzOxzVKfHP22R5HVRWlAU7P1d97qKjBj4Se3+QchI+zdcIrmU9A
tTmCXj57NpTDyLjS9dIDmLygtTv93lOzOmZS8glw0BFonPcd3ObI4RHVxR+V9xu1
lN13YYgBrK6yfApn9L5XL/31PuLfbg==
=VLBx
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"There are a number of major cleanups in ext4 this cycle:
- The data=journal writepath has been significantly cleaned up and
simplified, and reduces a large number of data=journal special
cases by Jan Kara.
- Ojaswin Muhoo has replaced linked list used to track extents that
have been used for inode preallocation with a red-black tree in the
multi-block allocator. This improves performance for workloads
which do a large number of random allocating writes.
- Thanks to Kemeng Shi for a lot of cleanup and bug fixes in the
multi-block allocator.
- Matthew wilcox has converted the code paths for reading and writing
ext4 pages to use folios.
- Jason Yan has continued to factor out ext4_fill_super() into
smaller functions for improve ease of maintenance and
comprehension.
- Josh Triplett has created an uapi header for ext4 userspace API's"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (105 commits)
ext4: Add a uapi header for ext4 userspace APIs
ext4: remove useless conditional branch code
ext4: remove unneeded check of nr_to_submit
ext4: move dax and encrypt checking into ext4_check_feature_compatibility()
ext4: factor out ext4_block_group_meta_init()
ext4: move s_reserved_gdt_blocks and addressable checking into ext4_check_geometry()
ext4: rename two functions with 'check'
ext4: factor out ext4_flex_groups_free()
ext4: use ext4_group_desc_free() in ext4_put_super() to save some duplicated code
ext4: factor out ext4_percpu_param_init() and ext4_percpu_param_destroy()
ext4: factor out ext4_hash_info_init()
Revert "ext4: Fix warnings when freezing filesystem with journaled data"
ext4: Update comment in mpage_prepare_extent_to_map()
ext4: Simplify handling of journalled data in ext4_bmap()
ext4: Drop special handling of journalled data from ext4_quota_on()
ext4: Drop special handling of journalled data from ext4_evict_inode()
ext4: Fix special handling of journalled data from extent zeroing
ext4: Drop special handling of journalled data from extent shifting operations
ext4: Drop special handling of journalled data from ext4_sync_file()
ext4: Commit transaction before writing back pages in data=journal mode
...
o MAINTAINERS files additions and changes.
o Fix hotplug warning in nohz code.
o Tick dependency changes by Zqiang.
o Lazy-RCU shrinker fixes by Zqiang.
o rcu-tasks stall reporting improvements by Neeraj.
o Initial changes for renaming of k[v]free_rcu() to its new k[v]free_rcu_mightsleep()
name for robustness.
o Documentation Updates:
o Significant changes to srcu_struct size.
o Deadlock detection for srcu_read_lock() vs synchronize_srcu() from Boqun.
o rcutorture and rcu-related tool, which are targeted for v6.4 from Boqun's tree.
o Other misc changes.
-----BEGIN PGP SIGNATURE-----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=Rgbj
-----END PGP SIGNATURE-----
Merge tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux
Pull RCU updates from Joel Fernandes:
- Updates and additions to MAINTAINERS files, with Boqun being added to
the RCU entry and Zqiang being added as an RCU reviewer.
I have also transitioned from reviewer to maintainer; however, Paul
will be taking over sending RCU pull-requests for the next merge
window.
- Resolution of hotplug warning in nohz code, achieved by fixing
cpu_is_hotpluggable() through interaction with the nohz subsystem.
Tick dependency modifications by Zqiang, focusing on fixing usage of
the TICK_DEP_BIT_RCU_EXP bitmask.
- Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n
kernels, fixed by Zqiang.
- Improvements to rcu-tasks stall reporting by Neeraj.
- Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for
increased robustness, affecting several components like mac802154,
drbd, vmw_vmci, tracing, and more.
A report by Eric Dumazet showed that the API could be unknowingly
used in an atomic context, so we'd rather make sure they know what
they're asking for by being explicit:
https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/
- Documentation updates, including corrections to spelling,
clarifications in comments, and improvements to the srcu_size_state
comments.
- Better srcu_struct cache locality for readers, by adjusting the size
of srcu_struct in support of SRCU usage by Christoph Hellwig.
- Teach lockdep to detect deadlocks between srcu_read_lock() vs
synchronize_srcu() contributed by Boqun.
Previously lockdep could not detect such deadlocks, now it can.
- Integration of rcutorture and rcu-related tools, targeted for v6.4
from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis
module parameter, and more
- Miscellaneous changes, various code cleanups and comment improvements
* tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits)
checkpatch: Error out if deprecated RCU API used
mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep()
rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep()
ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access
rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan()
rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early
rcu: Remove never-set needwake assignment from rcu_report_qs_rdp()
rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels
rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check
rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race
rcu/trace: use strscpy() to instead of strncpy()
tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem
...
These checkings are also related with feature compatibility checkings.
So move them into ext4_check_feature_compatibility(). No functional
change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230323140517.1070239-9-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The naming styles are different for some functions with 'check' in their
names. Some of them are like:
ext4_check_quota_consistency
ext4_check_test_dummy_encryption
ext4_check_opt_consistency
ext4_check_descriptors
ext4_check_feature_compatibility
While the others looks like below:
ext4_geometry_check
ext4_journal_data_mode_check
This is not a big deal and boils down to personal preference. But I'd
like to make them consistent.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230323140517.1070239-6-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The only difference here is that ->s_group_desc and ->s_flex_groups share
the same rcu read lock here but it is not necessary. In other places they
do not share the lock at all.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230323140517.1070239-4-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_percpu_param_init() and ext4_percpu_param_destroy(). And
also use ext4_percpu_param_destroy() in ext4_put_super() to avoid
duplicated code. No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230323140517.1070239-3-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After making ext4_writepages() properly clean all pages there is no need
for special treatment of filesystem freezing. Revert commit
e6c28a26b7.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-13-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that ext4_writepages() makes sure all journalled data is committed
and checkpointed, sync_filesystem() call done by dquot_quota_on() is
enough for quota IO to see uptodate data. So drop special handling of
journalled data from ext4_quota_on().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-10-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, the kernel uses i_prealloc_list to hold all the inode
preallocations. This is known to cause degradation in performance in
workloads which perform large number of sparse writes on a single file.
This is mainly because functions like ext4_mb_normalize_request() and
ext4_mb_use_preallocated() iterate over this complete list, resulting in
slowdowns when large number of PAs are present.
Patch 27bc446e2 partially fixed this by enforcing a limit of 512 for
the inode preallocation list and adding logic to continually trim the
list if it grows above the threshold, however our testing revealed that
a hardcoded value is not suitable for all kinds of workloads.
To optimize this, add an rbtree to the inode and hold the inode
preallocations in this rbtree. This will make iterating over inode PAs
faster and scale much better than a linked list. Additionally, we also
had to remove the LRU logic that was added during trimming of the list
(in ext4_mb_release_context()) as it will add extra overhead in rbtree.
The discards now happen in the lowest-logical-offset-first order.
** Locking notes **
With the introduction of rbtree to maintain inode PAs, we can't use RCU
to walk the tree for searching since it can result in partial traversals
which might miss some nodes(or entire subtrees) while discards happen
in parallel (which happens under a lock). Hence this patch converts the
ei->i_prealloc_lock spin_lock to rw_lock.
Almost all the codepaths that read/modify the PA rbtrees are protected
by the higher level inode->i_data_sem (except
ext4_mb_discard_group_preallocations() and ext4_clear_inode()) IIUC, the
only place we need lock protection is when one thread is reading
"searching" the PA rbtree (earlier protected under rcu_read_lock()) and
another is "deleting" the PAs in ext4_mb_discard_group_preallocations()
function (which iterates all the PAs using the grp->bb_prealloc_list and
deletes PAs from the tree without taking any inode lock (i_data_sem)).
So, this patch converts all rcu_read_lock/unlock() paths for inode list
PA to use read_lock() and all places where we were using
ei->i_prealloc_lock spinlock will now be using write_lock().
Note that this makes the fast path (searching of the right PA e.g.
ext4_mb_use_preallocated() or ext4_mb_normalize_request()), now use
read_lock() instead of rcu_read_lock/unlock(). Ths also will now block
due to slow discard path (ext4_mb_discard_group_preallocations()) which
uses write_lock().
But this is not as bad as it looks. This is because -
1. The slow path only occurs when the normal allocation failed and we
can say that we are low on disk space. One can argue this scenario
won't be much frequent.
2. ext4_mb_discard_group_preallocations(), locks and unlocks the rwlock
for deleting every individual PA. This gives enough opportunity for
the fast path to acquire the read_lock for searching the PA inode
list.
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/4137bce8f6948fedd8bae134dabae24acfe699c6.1679731817.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The kfree_rcu() and kvfree_rcu() macros' single-argument forms are
deprecated. Therefore switch to the new kfree_rcu_mightsleep() and
kvfree_rcu_mightsleep() variants. The goal is to avoid accidental use
of the single-argument forms, which can introduce functionality bugs in
atomic contexts and latency bugs in non-atomic contexts.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Lukas Czerner <lczerner@redhat.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Test generic/390 in data=journal mode often triggers a warning that
ext4_do_writepages() tries to start a transaction on frozen filesystem.
This happens because although all dirty data is properly written, jbd2
checkpointing code writes data through submit_bh() and as a result only
buffer dirty bits are cleared but page dirty bits stay set. Later when
the filesystem is frozen, writeback code comes, tries to write
supposedly dirty pages and the warning triggers. Fix the problem by
calling sync_filesystem() once more after flushing the whole journal to
clear stray page dirty bits.
[ Applied fixup patches to address crashes when running data=journal
tests; see links for more details -- TYT ]
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230308142528.12384-1-jack@suse.cz
Reported-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/all/20230319183617.GA896@sol.localdomain
Link: https://lore.kernel.org/r/20230323145404.21381-1-jack@suse.cz
Link: https://lore.kernel.org/r/20230323145404.21381-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
potential deadlock during directory renames that was introduced during
the merge window discovered by a combination of syzbot and lockdep.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmQNVwIACgkQ8vlZVpUN
gaMwmgf/ZAasXZEMV0zaQZa8zP4KvMKZjWe6azkcJg4sb/HG9Q7JzeJDCurhhWUj
8+QnyUcuKTyWKYWjGf0f5CZaYEM5AZYij41UJzu2qMkz5hVXSqBVuY8KywxuiJv5
kfuIvQh0Onv0Yrg2qAc52/kZkq1lu2sl/F5ertBWjdpTUXdBUdrCxkUk+1BgQWAj
vNwi1/+gNuX7RxMboHqYmwXFP39vECd+wteNdsiK1hR8bLqL68duLLq8xQdHt4gS
sbVmJKR4j2Giw4ZnlYi9RiwKIO0beqocanp+cfOPulyj5mTM8X1lr0uvaLZgx2AF
lqrS3/5ksp45cRT70qCIz8je70hTSg==
=nN3T
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug fixes and regressions for ext4, the most serious of which is a
potential deadlock during directory renames that was introduced during
the merge window discovered by a combination of syzbot and lockdep"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: zero i_disksize when initializing the bootloader inode
ext4: make sure fs error flag setted before clear journal error
ext4: commit super block if fs record error when journal record without error
ext4, jbd2: add an optimized bmap for the journal inode
ext4: fix WARNING in ext4_update_inline_data
ext4: move where set the MAY_INLINE_DATA flag is set
ext4: Fix deadlock during directory rename
ext4: Fix comment about the 64BIT feature
docs: ext4: modify the group desc size to 64
ext4: fix another off-by-one fsmap error on 1k block filesystems
ext4: fix RENAME_WHITEOUT handling for inline directories
ext4: make kobj_type structures constant
ext4: fix cgroup writeback accounting with fs-layer encryption
Now, jounral error number maybe cleared even though ext4_commit_super()
failed. This may lead to error flag miss, then fsck will miss to check
file system deeply.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307061703.245965-3-yebin@huaweicloud.com
Now, 'es->s_state' maybe covered by recover journal. And journal errno
maybe not recorded in journal sb as IO error. ext4_update_super() only
update error information when 'sbi->s_add_error_count' large than zero.
Then 'EXT4_ERROR_FS' flag maybe lost.
To solve above issue just recover 'es->s_state' error flag after journal
replay like error info.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307061703.245965-2-yebin@huaweicloud.com
direct I/O writes to preallocated blocks by using a shared inode lock
instead of taking an exclusive lock.
In addition, multiple bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmP9gYkACgkQ8vlZVpUN
gaNN0AgAqwS873C9QX7QQK8tE+VvKT7iteNaJ68c/CMymSP7o5RdalbQRiAsSy/Q
88PjBFVFQOsIa1d7OAUr50RHQODjOuOz6SJpitKKPnVC89gAzDt7Pk1AQzABjR37
GY7nneHTQs6fGXLMUz/SlsU+7a08Bz5BeAxVBQxzkRL6D28/sbpT6Iw1tDhUUsug
0o3kz/RolEopCzjhmH/Fpxt5RlBnTya5yX8IgmfEV3y7CfQ+XcTWgRebqDXxVCBE
/VCZOl2cv5n4PFlRH8eUihmyO5iu7p9W9ro6HbLEuxQXwcRNY7skONidceim2EYh
KzWZt59/JAs0DyvRWqZ9irtPDkuYqA==
=OIYo
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Improve performance for ext4 by allowing multiple process to perform
direct I/O writes to preallocated blocks by using a shared inode lock
instead of taking an exclusive lock.
In addition, multiple bug fixes and cleanups"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix incorrect options show of original mount_opt and extend mount_opt2
ext4: Fix possible corruption when moving a directory
ext4: init error handle resource before init group descriptors
ext4: fix task hung in ext4_xattr_delete_inode
jbd2: fix data missing when reusing bh which is ready to be checkpointed
ext4: update s_journal_inum if it changes after journal replay
ext4: fail ext4_iget if special inode unallocated
ext4: fix function prototype mismatch for ext4_feat_ktype
ext4: remove unnecessary variable initialization
ext4: fix inode tree inconsistency caused by ENOMEM
ext4: refuse to create ea block when umounted
ext4: optimize ea_inode block expansion
ext4: remove dead code in updating backup sb
ext4: dio take shared inode lock when overwriting preallocated blocks
ext4: don't show commit interval if it is zero
ext4: use ext4_fc_tl_mem in fast-commit replay path
ext4: improve xattr consistency checking and error reporting
