Currently the reset process in hns3 and firmware watchdog init process is
asynchronous. we think firmware watchdog initialization is completed
before hns3 clear the firmware interrupt source. However, firmware
initialization may not complete early.
so we add delay before hns3 clear firmware interrupt source and 5 ms delay
is enough to avoid second firmware reset interrupt.
Fixes: c1a81619d7 ("net: hns3: Add mailbox interrupt handling to PF driver")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Firmware does not respond driver commands during reset
Therefore, rule will fail to delete while the firmware is resetting
So, if failed to delete rule, set rule state to TO_DEL,
and the rule will be deleted when periodic task being scheduled.
Fixes: 0205ec041e ("net: hns3: add support for hw tc offload of tc flower")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the driver will enable unicast promisc for the function
once configure mac address fail. It's unreasonable when the failure
is caused by using same mac address with other functions. So only
enable unicast promisc when mac table full.
Fixes: c631c69682 ("net: hns3: refactor the promisc mode setting")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The device_version V3 hardware can't offload the checksum for IP in GRE
packets, but can do it for NvGRE. So default to disable the checksum and
GSO offload for GRE, but keep the ability to enable it when only using
NvGRE.
Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the vf cmdq is disabled, there is no need to keep these task running.
So this patch skip these task when the cmdq is disabled.
Fixes: ff200099d2 ("net: hns3: remove unnecessary work in hclgevf_main")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We have to unregister tco_pdev also if i2c_add_adapter() fails.
Fixes: 9424693035 ("i2c: i801: Create iTCO device on newer Intel PCHs")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
If the user has requested no SRSO mitigation, other mitigations can use
the lighter-weight SBPB instead of IBPB.
Fixes: fb3bd914b3 ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/b20820c3cfd1003171135ec8d762a0b957348497.1693889988.git.jpoimboe@kernel.org
To support live migration, the hypervisor sets the "lowest common
denominator" of features. Probing the microcode isn't allowed because
any detected features might go away after a migration.
As Andy Cooper states:
"Linux must not probe microcode when virtualised. What it may see
instantaneously on boot (owing to MSR_PRED_CMD being fully passed
through) is not accurate for the lifetime of the VM."
Rely on the hypervisor to set the needed IBPB_BRTYPE and SBPB bits.
Fixes: 1b5277c0ea ("x86/srso: Add SRSO_NO support")
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/3938a7209606c045a3f50305d201d840e8c834c7.1693889988.git.jpoimboe@kernel.org
Booting with mitigations=off incorrectly prevents the
X86_FEATURE_{IBPB_BRTYPE,SBPB} CPUID bits from getting set.
Also, future CPUs without X86_BUG_SRSO might still have IBPB with branch
type prediction flushing, in which case SBPB should be used instead of
IBPB. The current code doesn't allow for that.
Also, cpu_has_ibpb_brtype_microcode() has some surprising side effects
and the setting of these feature bits really doesn't belong in the
mitigation code anyway. Move it to earlier.
Fixes: fb3bd914b3 ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/869a1709abfe13b673bdd10c2f4332ca253a40bc.1693889988.git.jpoimboe@kernel.org
Reading the 'spec_rstack_overflow' sysfs file can trigger an unnecessary
MSR write, and possibly even a (handled) exception if the microcode
hasn't been updated.
Avoid all that by just checking X86_FEATURE_IBPB_BRTYPE instead, which
gets set by srso_select_mitigation() if the updated microcode exists.
Fixes: fb3bd914b3 ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/27d128899cb8aee9eb2b57ddc996742b0c1d776b.1693889988.git.jpoimboe@kernel.org
Initial booting is setting the task flag to idle (PF_IDLE) by the call
path sched_init() -> init_idle(). Having the task idle and calling
call_rcu() in kernel/rcu/tiny.c means that TIF_NEED_RESCHED will be
set. Subsequent calls to any cond_resched() will enable IRQs,
potentially earlier than the IRQ setup has completed. Recent changes
have caused just this scenario and IRQs have been enabled early.
This causes a warning later in start_kernel() as interrupts are enabled
before they are fully set up.
Fix this issue by setting the PF_IDLE flag later in the boot sequence.
Although the boot task was marked as idle since (at least) d80e4fda576d,
I am not sure that it is wrong to do so. The forced context-switch on
idle task was introduced in the tiny_rcu update, so I'm going to claim
this fixes 5f6130fa52.
Fixes: 5f6130fa52 ("tiny_rcu: Directly force QS when call_rcu_[bh|sched]() on idle_task")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mm/CAMuHMdWpvpWoDa=Ox-do92czYRvkok6_x6pYUH+ZouMcJbXy+Q@mail.gmail.com/
commit 133466c3bb ("net: stmmac: use per-queue 64 bit statistics
where necessary") caused one regression as found by Uwe, the backtrace
looks like:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc1-00449-g133466c3bbe1-dirty #21
Hardware name: STM32 (Device Tree Support)
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x60/0x90
dump_stack_lvl from register_lock_class+0x98c/0x99c
register_lock_class from __lock_acquire+0x74/0x293c
__lock_acquire from lock_acquire+0x134/0x398
lock_acquire from stmmac_get_stats64+0x2ac/0x2fc
stmmac_get_stats64 from dev_get_stats+0x44/0x130
dev_get_stats from rtnl_fill_stats+0x38/0x120
rtnl_fill_stats from rtnl_fill_ifinfo+0x834/0x17f4
rtnl_fill_ifinfo from rtmsg_ifinfo_build_skb+0xc0/0x144
rtmsg_ifinfo_build_skb from rtmsg_ifinfo+0x50/0x88
rtmsg_ifinfo from __dev_notify_flags+0xc0/0xec
__dev_notify_flags from dev_change_flags+0x50/0x5c
dev_change_flags from ip_auto_config+0x2f4/0x1260
ip_auto_config from do_one_initcall+0x70/0x35c
do_one_initcall from kernel_init_freeable+0x2ac/0x308
kernel_init_freeable from kernel_init+0x1c/0x138
kernel_init from ret_from_fork+0x14/0x2c
The reason is the rxq|txq_stats structures are not what expected
because stmmac_open() -> __stmmac_open() the structure is overwritten
by "memcpy(&priv->dma_conf, dma_conf, sizeof(*dma_conf));"
This causes the well initialized syncp member of rxq|txq_stats is
overwritten unexpectedly as pointed out by Johannes and Uwe.
Fix this issue by moving rxq|txq_stats back to stmmac_extra_stats. For
SMP cache friendly, we also mark stmmac_txq_stats and stmmac_rxq_stats
as ____cacheline_aligned_in_smp.
Fixes: 133466c3bb ("net: stmmac: use per-queue 64 bit statistics where necessary")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230917165328.3403-1-jszhang@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The recent enablement of -Wformat-truncation leads to a false-positive
warning for mixer_scarlett_gen2.c.
For suppressing the warning, replace snprintf() with scnprintf().
As stated in the above, truncation doesn't matter.
Fixes: 78bd8f5126 ("ALSA: usb-audio: scarlett_gen2: Fix -Wformat-truncation warning")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919071205.10684-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit in Fixes has removed an fwnode_graph_get_endpoint_by_id() call
in mipi_csis_subdev_init().
So the reference that was taken should not be released anymore in the
error handling path of the probe and in the remove function.
Remove the now incorrect fwnode_handle_put() calls.
Fixes: 1029939b37 ("media: v4l: async: Simplify async sub-device fwnode matching")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
`efi_loader_signature` has space for 4 bytes. We are copying "Xen" (3 bytes)
plus a NUL-byte which makes 4 total bytes. With that being said, there is
currently not a bug with the current `strncpy()` implementation in terms of
buffer overreads but we should favor a more robust string interface
either way.
A suitable replacement is `strscpy` [2] due to the fact that it guarantees
NUL-termination on the destination buffer while being functionally the
same in this case.
Link: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings[1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230911-strncpy-arch-x86-xen-efi-c-v1-1-96ab2bba2feb@google.com
Signed-off-by: Juergen Gross <jgross@suse.com>
When running as a paravirtualized guest under Xen, Linux is using
"lazy mode" for issuing hypercalls which don't need to take immediate
effect in order to improve performance (examples are e.g. multiple
PTE changes).
There are two different lazy modes defined: MMU and CPU lazy mode.
Today it is not possible to nest multiple lazy mode sections, even if
they are of the same kind. A recent change in memory management added
nesting of MMU lazy mode sections, resulting in a regression when
running as Xen PV guest.
Technically there is no reason why nesting of multiple sections of the
same kind of lazy mode shouldn't be allowed. So add support for that
for fixing the regression.
Fixes: bcc6cc8325 ("mm: add default definition of set_ptes()")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20230913113828.18421-4-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Only Xen is using the paravirt lazy mode code, so it can be moved to
Xen specific sources.
This allows to make some of the functions static or to merge them into
their only call sites.
While at it do a rename from "paravirt" to "xen" for all moved
specifiers.
No functional change.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20230913113828.18421-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
include/xen/arm/hypervisor.h contains definitions related to paravirt
lazy mode, which are used nowhere in the code.
All paravirt lazy mode related users are in x86 code, so remove the
definitions on Arm side.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20230913113828.18421-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
There are several functions involved for performing the functionality
of evtchn_do_upcall():
- __xen_evtchn_do_upcall() doing the real work
- xen_hvm_evtchn_do_upcall() just being a wrapper for
__xen_evtchn_do_upcall(), exposed for external callers
- xen_evtchn_do_upcall() calling __xen_evtchn_do_upcall(), too, but
without any user
Simplify this maze by:
- removing the unused xen_evtchn_do_upcall()
- removing xen_hvm_evtchn_do_upcall() as the only left caller of
__xen_evtchn_do_upcall(), while renaming __xen_evtchn_do_upcall() to
xen_evtchn_do_upcall()
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Prior to commit a01b8f2252, we would always read in the contents of a
!uptodate folio prior to writing userspace data into the folio,
allocated a folio state object, etc. Ritesh introduced an optimization
that skips all of that if the write would cover the entire folio.
Unfortunately, the optimization misses the unshare case, where we always
have to read in the folio contents since there isn't a data buffer
supplied by userspace. This can result in stale kernel memory exposure
if userspace issues a FALLOC_FL_UNSHARE_RANGE call on part of a shared
file that isn't already cached.
This was caught by observing fstests regressions in the "unshare around"
mechanism that is used for unaligned writes to a reflinked realtime
volume when the realtime extent size is larger than 1FSB, though I think
it applies to any shared file.
Cc: ritesh.list@gmail.com, willy@infradead.org
Fixes: a01b8f2252 ("iomap: Allocate ifs in ->write_begin() early")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Bugfixes:
* Various O_DIRECT related fixes from Trond
* Error handling
* Locking issues
* Use the correct commit infor for joining page groups
* Fixes for rescheduling IO
* Sunrpc bad verifier fixes
* Report EINVAL errors from connect()
* Revalidate creds that the server has rejected
* Revert "SUNRPC: Fail faster on bad verifier"
* Fix pNFS session trunking when MDS=DS
* Fix zero-value filehandles for post-open getattr operations
* Fix compiler warning about tautological comparisons
* Revert "SUNRPC: clean up integer overflow check" before Trond's fix
-----BEGIN PGP SIGNATURE-----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=M6aI
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.6-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"Various O_DIRECT related fixes from Trond:
- Error handling
- Locking issues
- Use the correct commit info for joining page groups
- Fixes for rescheduling IO
Sunrpc bad verifier fixes:
- Report EINVAL errors from connect()
- Revalidate creds that the server has rejected
- Revert "SUNRPC: Fail faster on bad verifier"
Misc:
- Fix pNFS session trunking when MDS=DS
- Fix zero-value filehandles for post-open getattr operations
- Fix compiler warning about tautological comparisons
- Revert 'SUNRPC: clean up integer overflow check' before Trond's fix"
* tag 'nfs-for-6.6-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Silence compiler complaints about tautological comparisons
Revert "SUNRPC: clean up integer overflow check"
NFSv4.1: fix zero value filehandle in post open getattr
NFSv4.1: fix pnfs MDS=DS session trunking
Revert "SUNRPC: Fail faster on bad verifier"
SUNRPC: Mark the cred for revalidation if the server rejects it
NFS/pNFS: Report EINVAL errors from connect() to the server
NFS: More fixes for nfs_direct_write_reschedule_io()
NFS: Use the correct commit info in nfs_join_page_group()
NFS: More O_DIRECT accounting fixes for error paths
NFS: Fix O_DIRECT locking issues
NFS: Fix error handling for O_DIRECT write scheduling
If a network filesystem using netfs implements a clamp_length()
function, it can set subrequest lengths smaller than a page size.
When we loop through the folios in netfs_rreq_unlock_folios() to
set any folios to be written back, we need to make sure we only
call folio_start_fscache() once for each folio.
Otherwise, this simple testcase:
mount -o fsc,rsize=1024,wsize=1024 127.0.0.1:/export /mnt/nfs
dd if=/dev/zero of=/mnt/nfs/file.bin bs=4096 count=1
1+0 records in
1+0 records out
4096 bytes (4.1 kB, 4.0 KiB) copied, 0.0126359 s, 324 kB/s
echo 3 > /proc/sys/vm/drop_caches
cat /mnt/nfs/file.bin > /dev/null
will trigger an oops similar to the following:
page dumped because: VM_BUG_ON_FOLIO(folio_test_private_2(folio))
------------[ cut here ]------------
kernel BUG at include/linux/netfs.h:44!
...
CPU: 5 PID: 134 Comm: kworker/u16:5 Kdump: loaded Not tainted 6.4.0-rc5
...
RIP: 0010:netfs_rreq_unlock_folios+0x68e/0x730 [netfs]
...
Call Trace:
netfs_rreq_assess+0x497/0x660 [netfs]
netfs_subreq_terminated+0x32b/0x610 [netfs]
nfs_netfs_read_completion+0x14e/0x1a0 [nfs]
nfs_read_completion+0x2f9/0x330 [nfs]
rpc_free_task+0x72/0xa0 [sunrpc]
rpc_async_release+0x46/0x70 [sunrpc]
process_one_work+0x3bd/0x710
worker_thread+0x89/0x610
kthread+0x181/0x1c0
ret_from_fork+0x29/0x50
Fixes: 3d3c950467 ("netfs: Provide readahead and readpage netfs helpers"
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2210612
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20230608214137.856006-1-dwysocha@redhat.com/ # v1
Link: https://lore.kernel.org/r/20230915185704.1082982-1-dwysocha@redhat.com/ # v2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Building UML with KASAN fails since commit 69d4c0d321 ("entry, kasan,
x86: Disallow overriding mem*() functions") with the following errors:
$ tools/testing/kunit/kunit.py run --kconfig_add CONFIG_KASAN=y
...
ld: mm/kasan/shadow.o: in function `memset':
shadow.c:(.text+0x40): multiple definition of `memset';
arch/x86/lib/memset_64.o:(.noinstr.text+0x0): first defined here
ld: mm/kasan/shadow.o: in function `memmove':
shadow.c:(.text+0x90): multiple definition of `memmove';
arch/x86/lib/memmove_64.o:(.noinstr.text+0x0): first defined here
ld: mm/kasan/shadow.o: in function `memcpy':
shadow.c:(.text+0x110): multiple definition of `memcpy';
arch/x86/lib/memcpy_64.o:(.noinstr.text+0x0): first defined here
UML does not use GENERIC_ENTRY and is still supposed to be allowed to
override the mem*() functions, so use weak aliases in that case.
Fixes: 69d4c0d321 ("entry, kasan, x86: Disallow overriding mem*() functions")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20230918-uml-kasan-v3-1-7ad6db477df6@axis.com
Patch eef46ab713 introduced a new gfs2 quota=quiet mount option.
Checks for the new option were added to quota.c, but a check in
gfs2_quota_lock_check() was overlooked. This patch adds the missing
check.
Fixes: eef46ab713 ("gfs2: Introduce new quota=quiet mount option")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, function gfs2_scan_glock_lru would only try to free
glocks that had a reference count of 0. But if the reference count ever
got to 0, the glock should have already been freed.
Shrinker function gfs2_dispose_glock_lru checks whether glocks on the
LRU are demote_ok, and if so, tries to demote them. But that's only
possible if the reference count is at least 1.
This patch changes gfs2_scan_glock_lru so it will try to demote and/or
dispose of glocks that have a reference count of 1 and which are either
demotable, or are already unlocked.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
On a thawed filesystem, the freeze glock is held in shared mode. In
order to initiate a cluster-wide freeze, the node initiating the freeze
drops the freeze glock and grabs it in exclusive mode. The other nodes
recognize this as contention on the freeze glock; function
freeze_go_callback is invoked. This indicates to them that they must
freeze the filesystem locally, drop the freeze glock, and then
re-acquire it in shared mode before being able to unfreeze the
filesystem locally.
While a node is trying to re-acquire the freeze glock in shared mode,
additional contention can occur. In that case, the node must behave in
the same way as above.
Unfortunately, freeze_go_callback() contains a check that causes it to
bail out when the freeze glock isn't held in shared mode. Fix that to
allow the glock to be unlocked or held in shared mode.
In addition, update a reference to trylock_super() which has been
renamed to super_trylock_shared() in the meantime.
Fixes: b77b4a4815 ("gfs2: Rework freeze / thaw logic")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Hans has been asking for another person to help as the maintainer of
the x86 platform driver because Mark has not been able to find time to
do that. I got asked for the task and have been reviewing the relevant
patches for a while now but lets make it more official by adding the
MAINTAINERS entries.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230918102901.17669-2-ilpo.jarvinen@linux.intel.com
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
hotkey_status_set expects the hotkey_mutex to be held.
It seems like it was missed here and that gives lockdep
warnings while resuming.
Fixes: 38831eaf7d ("platform/x86: thinkpad_acpi: use lockdep annotations")
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Link: https://lore.kernel.org/r/20230914130356.235912-1-admin@dennisbonke.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It's possible for interrupts to get significantly delayed to the point
that callers of intel_scu_ipc_dev_command() and friends can call the
function once, hit a timeout, and call it again while the interrupt
still hasn't been processed. This driver will get seriously confused if
the interrupt is finally processed after the second IPC has been sent
with ipc_command(). It won't know which IPC has been completed. This
could be quite disastrous if calling code assumes something has happened
upon return from intel_scu_ipc_dev_simple_command() when it actually
hasn't.
Let's avoid this scenario by simply returning -EBUSY in this case.
Hopefully higher layers will know to back off or fail gracefully when
this happens. It's all highly unlikely anyway, but it's better to be
correct here as we have no way to know which IPC the status register is
telling us about if we send a second IPC while the previous IPC is still
processing.
Cc: Prashant Malani <pmalani@chromium.org>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: ed12f295bf ("ipc: Added support for IPC interrupt mode")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-5-swboyd@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Andy discovered this bug during patch review. The 'scu' argument to this
function shouldn't be overridden by the function itself. It doesn't make
any sense. Looking at the commit history, we see that commit
f57fa18583 ("platform/x86: intel_scu_ipc: Introduce new SCU IPC API")
removed the setting of the scu to ipcdev in other functions, but not
this one. That was an oversight. Remove this line so that we stop
overriding the scu instance that is used by this function.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/r/ZPjdZ3xNmBEBvNiS@smile.fi.intel.com
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: f57fa18583 ("platform/x86: intel_scu_ipc: Introduce new SCU IPC API")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-4-swboyd@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It's possible for the completion in ipc_wait_for_interrupt() to timeout,
simply because the interrupt was delayed in being processed. A timeout
in itself is not an error. This driver should check the status register
upon a timeout to ensure that scheduling or interrupt processing delays
don't affect the outcome of the IPC return value.
CPU0 SCU
---- ---
ipc_wait_for_interrupt()
wait_for_completion_timeout(&scu->cmd_complete)
[TIMEOUT] status[IPC_STATUS_BUSY]=0
Fix this problem by reading the status bit in all cases, regardless of
the timeout. If the completion times out, we'll assume the problem was
that the IPC_STATUS_BUSY bit was still set, but if the status bit is
cleared in the meantime we know that we hit some scheduling delay and we
should just check the error bit.
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: ed12f295bf ("ipc: Added support for IPC interrupt mode")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-3-swboyd@chromium.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It's possible for the polling loop in busy_loop() to get scheduled away
for a long time.
status = ipc_read_status(scu); // status = IPC_STATUS_BUSY
<long time scheduled away>
if (!(status & IPC_STATUS_BUSY))
If this happens, then the status bit could change while the task is
scheduled away and this function would never read the status again after
timing out. Instead, the function will return -ETIMEDOUT when it's
possible that scheduling didn't work out and the status bit was cleared.
Bit polling code should always check the bit being polled one more time
after the timeout in case this happens.
Fix this by reading the status once more after the while loop breaks.
The readl_poll_timeout() macro implements all of this, and it is
shorter, so use that macro here to consolidate code and fix this.
There were some concerns with using readl_poll_timeout() because it uses
timekeeping, and timekeeping isn't running early on or during the late
stages of system suspend or early stages of system resume, but an audit
of the code concluded that this code isn't called during those times so
it is safe to use the macro.
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Fixes: e7b7ab3847 ("platform/x86: intel_scu_ipc: Sleeping is fine when polling")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-2-swboyd@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The IMX spi driver has a hardcoded 8, breaking the driver for word
lengths other than 8.
Signed-off-by: Stefan Moring <stefanmoring@gmail.com>
Reported-by: Sebastian Reichel <sre@kernel.org>
Fixes: 15a6af94a2 ("spi: Increase imx51 ecspi burst length based on transfer length")
Tested-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20230917164037.29284-1-stefanmoring@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Lafreniere says:
====================
ax25: Update link for linux-ax25.org
http://linux-ax25.org has been down for nearly a year. Its official
replacement is https://linux-ax25.in-berlin.de.
Update all references to the dead link to its replacement.
As the three touched files are in different areas of the tree, this is
being sent with one patch per file.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
http://linux-ax25.org has been down for nearly a year. Its official
replacement is https://linux-ax25.in-berlin.de.
Update the documentation to point there instead. And acknowledge that
while the linux-hams list isn't entirely dead, it isn't what most would
call 'active'. Remove that word.
Link: https://marc.info/?m=166792551600315
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts says:
====================
mptcp: fix stalled connections
Daire reported a few issues with MPTCP where some connections were
stalled in different states. Paolo did a great job fixing them.
Patch 1 fixes bogus receive window shrinkage with multiple subflows. Due
to a race condition and unlucky circumstances, that may lead to
TCP-level window shrinkage, and the connection being stalled on the
sender end.
Patch 2 is a preparation for patch 3 which processes pending subflow
errors on close. Without that and under specific circumstances, the
MPTCP-level socket might not switch to the CLOSE state and stall.
Patch 4 is also a preparation patch for the next one. Patch 5 fixes
MPTCP connections not switching to the CLOSE state when all subflows
have been closed but no DATA_FIN have been exchanged to explicitly close
the MPTCP connection. Now connections in such state will switch to the
CLOSE state after a timeout, still allowing the "make-after-break"
feature but making sure connections don't stall forever. It will be
possible to modify this timeout -- currently matching TCP TIMEWAIT value
(60 seconds) -- in a future version.
====================
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
According to RFC 8684 section 3.3:
A connection is not closed unless [...] or an implementation-specific
connection-level send timeout.
Currently the MPTCP protocol does not implement such timeout, and
connection timing-out at the TCP-level never move to close state.
Introduces a catch-up condition at subflow close time to move the
MPTCP socket to close, too.
That additionally allows removing similar existing inside the worker.
Finally, allow some additional timeout for plain ESTABLISHED mptcp
sockets, as the protocol allows creating new subflows even at that
point and making the connection functional again.
This issue is actually present since the beginning, but it is basically
impossible to solve without a long chain of functional pre-requisites
topped by commit bbd49d114d ("mptcp: consolidate transition to
TCP_CLOSE in mptcp_do_fastclose()"). When backporting this current
patch, please also backport this other commit as well.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/430
Fixes: e16163b6e2 ("mptcp: refactor shutdown and close")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The msk socket uses to different timeout to track close related
events and retransmissions. The existing helpers do not indicate
clearly which timer they actually touch, making the related code
quite confusing.
Change the existing helpers name to avoid such confusion. No
functional change intended.
This patch is linked to the next one ("mptcp: fix dangling connection
hang-up"). The two patches are supposed to be backported together.
Cc: stable@vger.kernel.org # v5.11+
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
On incoming TCP reset, subflow closing could happen before error
propagation. That in turn could cause the socket error being ignored,
and a missing socket state transition, as reported by Daire-Byrne.
Address the issues explicitly checking for subflow socket error at
close time. To avoid code duplication, factor-out of __mptcp_error_report()
a new helper implementing the relevant bits.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/429
Fixes: 15cc104533 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will simplify the next patch ("mptcp: process pending subflow error
on close").
No functional change intended.
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case multiple subflows race to update the mptcp-level receive
window, the subflow losing the race should use the window value
provided by the "winning" subflow to update it's own tcp-level
rcv_wnd.
To such goal, the current code bogusly uses the mptcp-level rcv_wnd
value as observed before the update attempt. On unlucky circumstances
that may lead to TCP-level window shrinkage, and stall the other end.
Address the issue feeding to the rcv wnd update the correct value.
Fixes: f3589be0c4 ("mptcp: never shrink offered window")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/427
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 2e38a2a981 ("thermal/core: Add a generic thermal_zone_set_trip()
function") updating a trip point temperature doesn't actually work,
because the value supplied by user space is subsequently overwritten
with the current trip point hysteresis value.
Fix this by changing the code to parse the number string supplied by
user space after retrieving the current trip point data from the
thermal zone.
Also drop a redundant tab character from the code in question.
Fixes: 2e38a2a981 ("thermal/core: Add a generic thermal_zone_set_trip() function")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 6.3+ <stable@vger.kernel.org> # 6.3+
We have exposed a number of fields in ID_AA64ISAR2_EL1 to userspace without
adding the matching documentation in cpu-feature-registers.rst, update it
to match the implementation.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20230914-arm64-feat-hbc-doc-v1-2-797d25f06897@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
A bug was introduced during unification of setting CAP_SMP_T_SWCOORD for
the _PDC and _OSC methods.
The third u32 in the buffer is never cleared before setting bits on it.
The memory is not guaranteed to be zero as it was allocated by kmalloc()
instead of kzalloc().
Fix this by initializing the third u32 in the buffer to 0.
Fixes: b9e8d0168a ("ACPI: processor: Set CAP_SMP_T_SWCOORD in arch_acpi_set_proc_cap_bits()")
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When we added support for FEAT_HBC we added a new hwcap but did not
document that we had done so, add the documentation.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20230914-arm64-feat-hbc-doc-v1-1-797d25f06897@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
