Commit graph

14 commits

Author SHA1 Message Date
Boaz Harrosh
aa281ac631 Boaz Harrosh - Fix broken email address
I no longer have access to the Panasas email.
So change to an email that can always reach me.

Signed-off-by: Boaz Harrosh <ooo@electrozaur.com>
2014-10-19 20:22:32 +03:00
Fabian Frederick
b134079f1f fs/exofs/ore_raid.c: replace count*size kzalloc by kcalloc
kcalloc manages count*sizeof overflow.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:24 -07:00
Boaz Harrosh
ce5d36aac2 ore: Support for raid 6
This simple patch adds support for raid6 to the ORE.
Most operations and calculations where already for the general
case. Only things left:
* call async_gen_syndrome() in the case of raid6
  (NOTE that the raid6 math is the one supported by the Linux Kernel
   see: crypto/async_tx/async_pq.c)
* call _ore_add_parity_unit() twice with only last call generating
  the redundancy pages.

* Fix couple BUGS in old code
  a. In reads when parity==2 it can happen that per_dev->length=0
     but per_dev->offset was set and adjusted by _ore_add_sg_seg().
     Don't let it be overwritten.
  b. The all 'cur_comp > starting_dev' thing to determine if:
       "per_dev->offset is in the current stripe number or the
       next one."
     Was a complete raid5/4 accident. When parity==2 this is not
     at all true usually. All we need to do is increment si->ob_offset
     once we pass by the first parity device.
     (This also greatly simplifies the code, amen)
  c. Calculation of si->dev rotation can overflow when parity==2.

* Then last enable raid6 in ore_verify_layout()

I want to deeply thank Daniel Gryniewicz who found first all the
bugs in the old raid code, and inspired these patches:
	Inspired-by Daniel Gryniewicz <dang@linuxbox.com>

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2014-05-22 14:48:15 +03:00
Boaz Harrosh
455682ce54 ore: Remove redundant dev_order(), more cleanups
Two cleanups:
* si->cur_comp, si->cur_pg where always calculated after
  the call to ore_calc_stripe_info() with the help of
  _dev_order(...). But these are already calculated by
  ore_calc_stripe_info() and can be just set there.
  (This is left over from the time that si->cur_comp, si->cur_pg
   were only used by raid code, but now the main loop manages
   them anyway even though they are ultimately not used in
   none raid code)

* si->cur_comp - For the very last stripe case, was set inside
  _ore_add_parity_unit(). This is not clear and will be wrong
  for coming raid6 so move this to only caller. Now si->cur_comp
  is only manipulated within _prepare_for_striping(), always next
  to the manipulation of cur_dev.
  Which is much easier to understand and follow.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2014-05-22 14:46:15 +03:00
Boaz Harrosh
101a642781 ore: (trivial) reformat some code
rearrange some source lines. Nothing changed.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2014-05-22 14:45:21 +03:00
Rashika Kheria
0961f02a37 fs: Mark functions as static in exofs/ore_raid.c
Mark functions as static in exofs/ore_raid.c because they are not used
outside this file.

This also eliminates the following warning in exofs/ore_raid.c:
fs/exofs/ore_raid.c:24:14: warning: no previous prototype for _raid_page_alloc [-Wmissing-prototypes]
fs/exofs/ore_raid.c:29:6: warning: no previous prototype for _raid_page_free [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2014-04-03 11:40:55 +03:00
Kent Overstreet
d74c6d514f block: Add bio_for_each_segment_all()
__bio_for_each_segment() iterates bvecs from the specified index
instead of bio->bv_idx.  Currently, the only usage is to walk all the
bvecs after the bio has been advanced by specifying 0 index.

For immutable bvecs, we need to split these apart;
bio_for_each_segment() is going to have a different implementation.
This will also help document the intent of code that's using it -
bio_for_each_segment_all() is only legal to use for code that owns the
bio.

Signed-off-by: Kent Overstreet <koverstreet@google.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Neil Brown <neilb@suse.de>
CC: Boaz Harrosh <bharrosh@panasas.com>
2013-03-23 14:26:28 -07:00
Dan Carpenter
74b217d0d3 ore: signedness bug in _sp2d_min_pg()
This for loop doesn't work correctly when "p" is unsigned.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
2012-10-03 13:51:51 -07:00
Boaz Harrosh
537632e0a5 ore: Unlock r4w pages in exact reverse order of locking
The read-4-write pages are locked in address ascending order.
But where unlocked in a way easiest for coding. Fix that,
locks should be released in opposite order of locking, .i.e
descending address order.

I have not hit this dead-lock. It was found by inspecting the
dbug print-outs. I suspect there is an higher lock at caller that
protects us, but fix it regardless.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-07-20 11:49:25 +03:00
Boaz Harrosh
9ff19309a9 ore: Fix NFS crash by supporting any unaligned RAID IO
In RAID_5/6 We used to not permit an IO that it's end
byte is not stripe_size aligned and spans more than one stripe.
.i.e the caller must check if after submission the actual
transferred bytes is shorter, and would need to resubmit
a new IO with the remainder.

Exofs supports this, and NFS was supposed to support this
as well with it's short write mechanism. But late testing has
exposed a CRASH when this is used with none-RPC layout-drivers.

The change at NFS is deep and risky, in it's place the fix
at ORE to lift the limitation is actually clean and simple.
So here it is below.

The principal here is that in the case of unaligned IO on
both ends, beginning and end, we will send two read requests
one like old code, before the calculation of the first stripe,
and also a new site, before the calculation of the last stripe.
If any "boundary" is aligned or the complete IO is within a single
stripe. we do a single read like before.

The code is clean and simple by splitting the old _read_4_write
into 3 even parts:
1._read_4_write_first_stripe
2. _read_4_write_last_stripe
3. _read_4_write_execute

And calling 1+3 at the same place as before. 2+3 before last
stripe, and in the case of all in a single stripe then 1+2+3
is preformed additively.

Why did I not think of it before. Well I had a strike of
genius because I have stared at this code for 2 years, and did
not find this simple solution, til today. Not that I did not try.

This solution is much better for NFS than the previous supposedly
solution because the short write was dealt  with out-of-band after
IO_done, which would cause for a seeky IO pattern where as in here
we execute in order. At both solutions we do 2 separate reads, only
here we do it within a single IO request. (And actually combine two
writes into a single submission)

NFS/exofs code need not change since the ORE API communicates the new
shorter length on return, what will happen is that this case would not
occur anymore.

hurray!!

[Stable this is an NFS bug since 3.2 Kernel should apply cleanly]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-07-20 11:45:28 +03:00
Boaz Harrosh
724577ca35 ore: Must support none-PAGE-aligned IO
NFS might send us offsets that are not PAGE aligned. So
we must read in the reminder of the first/last pages, in cases
we need it for Parity calculations.

We only add an sg segments to read the partial page. But
we don't mark it as read=true because it is a lock-for-write
page.

TODO: In some cases (IO spans a single unit) we can just
adjust the raid_unit offset/length, but this is left for
later Kernels.

[Bug in 3.2.0 Kernel]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-01-08 10:43:13 +02:00
Boaz Harrosh
361aba569f ore: fix BUG_ON, too few sgs when reading
When reading RAID5 files, in rare cases, we calculated too
few sg segments. There should be two extra for the beginning
and end partial units.

Also "too few sg segments" should not be a BUG_ON there is
all the mechanics in place to handle it, as a short read.
So just return -ENOMEM and the rest of the code will gracefully
split the IO.

[Bug in 3.2.0 Kernel]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-01-06 16:49:07 +02:00
Boaz Harrosh
769ba8d920 ore: RAID5 Write
This is finally the RAID5 Write support.

The bigger part of this patch is not the XOR engine itself, But the
read4write logic, which is a complete mini prepare_for_striping
reading engine that can read scattered pages of a stripe into cache
so it can be used for XOR calculation. That is, if the write was not
stripe aligned.

The main algorithm behind the XOR engine is the 2 dimensional array:
	struct __stripe_pages_2d.
A drawing might save 1000 words
---

__stripe_pages_2d
       |
 n = pages_in_stripe_unit;
 w = group_width - parity;
       |                            pages array presented to the XOR lib
       |                                                |
       V                                                |
 __1_page_stripe[0].pages --> [c0][c1]..[cw][c_par] <---|
       |                                                |
 __1_page_stripe[1].pages --> [c0][c1]..[cw][c_par] <---
       |
...    |                         ...
       |
 __1_page_stripe[n].pages --> [c0][c1]..[cw][c_par]
                               ^
                               |
           data added columns first then row

---
The pages are put on this array columns first. .i.e:
	p0-of-c0, p1-of-c0, ... pn-of-c0, p0-of-c1, ...
So we are doing a corner turn of the pages.

Note that pages will zigzag down and left. but are put sequentially
in growing order. So when the time comes to XOR the stripe, only the
beginning and end of the array need be checked. We scan the array
and any NULL spot will be field by pages-to-be-read.

The FS that wants to support RAID5 needs to supply an
operations-vector that searches a given page in cache, and specifies
if the page is uptodate or need reading. All these pages to be read
are put on a slave ore_io_state and synchronously read. All the pages
of a stripe are read in one IO, using the scatter gather mechanism.

In write we constrain our IO to only be incomplete on a single
stripe. Meaning either the complete IO is within a single stripe so
we might have pages to read from both beginning  or end of the
strip. Or we have some reading to do at beginning but end at strip
boundary. The left over pages are pushed to the next IO by the API
already established by previous work, where an IO offset/length
combination presented to the ORE might get the length truncated and
the user must re-submit the leftover pages. (Both exofs and NFS
support this)

But any ORE user should make it's best effort to align it's IO
before hand and avoid complications. A cached ore_layout->stripe_size
member can be used for that calculation. (NOTE: that ORE demands
that stripe_size may not be bigger then 32bit)

What else? Well read it and tell me.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-24 17:15:33 -07:00
Boaz Harrosh
a1fec1dbbc ore: RAID5 read
This patch introduces the first stage of RAID5 support
mainly the skip-over-raid-units when reading. For
writes it inserts BLANK units, into where XOR blocks
should be calculated and written to.

It introduces the new "general raid maths", and the main
additional parameters and components needed for raid5.

Since at this stage it could corrupt future version that
actually do support raid5. The enablement of raid5
mounting and setting of parity-count > 0 is disabled. So
the raid5 code will never be used. Mounting of raid5 is
only enabled later once the basic XOR write is also in.
But if the patch "enable RAID5" is applied this code has
been tested to be able to properly read raid5 volumes
and is according to standard.

Also it has been tested that the new maths still properly
supports RAID0 and grouping code just as before.
(BTW: I have found more bugs in the pnfs-obj RAID math
 fixed here)

The ore.c file is getting too big, so new ore_raid.[hc]
files are added that will include the special raid stuff
that are not used in striping and mirrors. In future write
support these will get bigger.
When adding the ore_raid.c to Kbuild file I was forced to
rename ore.ko to libore.ko. Is it possible to keep source
file, say ore.c and module file ore.ko the same even if there
are multiple files inside ore.ko?

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-24 16:55:36 -07:00