Commit Graph

36 Commits

Author SHA1 Message Date
Reshetova, Elena 6c5a1c4a2a net, rds: convert rds_message.m_refcount from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-04 22:35:18 +01:00
Sowmini Varadhan 905dd4184e RDS: TCP: Track peer's connection generation number
The RDS transport has to be able to distinguish between
two types of failure events:
(a) when the transport fails (e.g., TCP connection reset)
    but the RDS socket/connection layer on both sides stays
    the same
(b) when the peer's RDS layer itself resets (e.g., due to module
    reload or machine reboot at the peer)
In case (a) both sides must reconnect and continue the RDS messaging
without any message loss or disruption to the message sequence numbers,
and this is achieved by rds_send_path_reset().

In case (b) we should reset all rds_connection state to the
new incarnation of the peer. Examples of state that needs to
be reset are next expected rx sequence number from, or messages to be
retransmitted to, the new incarnation of the peer.

To achieve this, the RDS handshake probe added as part of
commit 5916e2c155 ("RDS: TCP: Enable multipath RDS for TCP")
is enhanced so that sender and receiver of the RDS ping-probe
will add a generation number as part of the RDS_EXTHDR_GEN_NUM
extension header. Each peer stores local and remote generation
numbers as part of each rds_connection. Changes in generation
number will be detected via incoming handshake probe ping
request or response and will allow the receiver to reset rds_connection
state.

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17 13:35:18 -05:00
Sowmini Varadhan 5916e2c155 RDS: TCP: Enable multipath RDS for TCP
Use RDS probe-ping to compute how many paths may be used with
the peer, and to synchronously start the multiple paths. If mprds is
supported, hash outgoing traffic to one of multiple paths in rds_sendmsg()
when multipath RDS is supported by the transport.

CC: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15 11:36:58 -07:00
Sowmini Varadhan d0a47d3272 rds: Make rds_message_copy_from_user() return 0 on success.
Commit 083735f4b0 ("rds: switch rds_message_copy_from_user() to iov_iter")
breaks rds_message_copy_from_user() semantics on success, and causes it
to return nbytes copied, when it should return 0.  This commit fixes that bug.

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-07 22:41:56 -08:00
Geert Uytterhoeven 6ff4a8ad4b rds: Fix min() warning in rds_message_inc_copy_to_user()
net/rds/message.c: In function ‘rds_message_inc_copy_to_user’:
net/rds/message.c:328: warning: comparison of distinct pointer types lacks a cast

Use min_t(unsigned long, ...) like is done in
rds_message_copy_from_user().

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-15 11:49:09 -05:00
Al Viro 083735f4b0 rds: switch rds_message_copy_from_user() to iov_iter
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-24 05:16:43 -05:00
Al Viro c310e72c89 rds: switch ->inc_copy_to_user() to passing iov_iter
instances get considerably simpler from that...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-24 05:16:43 -05:00
Cong Wang 7dac1b514a rds: simplify a warning message
Cc: David S. Miller <davem@davemloft.net>
Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-04 14:12:07 -05:00
Cong Wang ece6b0a2b2 rds: limit the size allocated by rds_message_alloc()
Dave Jones reported the following bug:

"When fed mangled socket data, rds will trust what userspace gives it,
and tries to allocate enormous amounts of memory larger than what
kmalloc can satisfy."

WARNING: at mm/page_alloc.c:2393 __alloc_pages_nodemask+0xa0d/0xbe0()
Hardware name: GA-MA78GM-S2H
Modules linked in: vmw_vsock_vmci_transport vmw_vmci vsock fuse bnep dlci bridge 8021q garp stp mrp binfmt_misc l2tp_ppp l2tp_core rfcomm s
Pid: 24652, comm: trinity-child2 Not tainted 3.8.0+ #65
Call Trace:
 [<ffffffff81044155>] warn_slowpath_common+0x75/0xa0
 [<ffffffff8104419a>] warn_slowpath_null+0x1a/0x20
 [<ffffffff811444ad>] __alloc_pages_nodemask+0xa0d/0xbe0
 [<ffffffff8100a196>] ? native_sched_clock+0x26/0x90
 [<ffffffff810b2128>] ? trace_hardirqs_off_caller+0x28/0xc0
 [<ffffffff810b21cd>] ? trace_hardirqs_off+0xd/0x10
 [<ffffffff811861f8>] alloc_pages_current+0xb8/0x180
 [<ffffffff8113eaaa>] __get_free_pages+0x2a/0x80
 [<ffffffff811934fe>] kmalloc_order_trace+0x3e/0x1a0
 [<ffffffff81193955>] __kmalloc+0x2f5/0x3a0
 [<ffffffff8104df0c>] ? local_bh_enable_ip+0x7c/0xf0
 [<ffffffffa0401ab3>] rds_message_alloc+0x23/0xb0 [rds]
 [<ffffffffa04043a1>] rds_sendmsg+0x2b1/0x990 [rds]
 [<ffffffff810b21cd>] ? trace_hardirqs_off+0xd/0x10
 [<ffffffff81564620>] sock_sendmsg+0xb0/0xe0
 [<ffffffff810b2052>] ? get_lock_stats+0x22/0x70
 [<ffffffff810b24be>] ? put_lock_stats.isra.23+0xe/0x40
 [<ffffffff81567f30>] sys_sendto+0x130/0x180
 [<ffffffff810b872d>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff816c547b>] ? _raw_spin_unlock_irq+0x3b/0x60
 [<ffffffff816cd767>] ? sysret_check+0x1b/0x56
 [<ffffffff810b8695>] ? trace_hardirqs_on_caller+0x115/0x1a0
 [<ffffffff81341d8e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff816cd742>] system_call_fastpath+0x16/0x1b
---[ end trace eed6ae990d018c8b ]---

Reported-by: Dave Jones <davej@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-04 14:12:06 -05:00
Paul Gortmaker bc3b2d7fb9 net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modules
These files are non modular, but need to export symbols using
the macros now living in export.h -- call out the include so
that things won't break when we remove the implicit presence
of module.h from everywhere.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:30:30 -04:00
Pavel Emelyanov aa58163a76 rds: Fix rds message leak in rds_message_map_pages
The sgs allocation error path leaks the allocated message.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-08 12:17:09 -08:00
Andy Grover d139ff0907 RDS: Let rds_message_alloc_sgs() return NULL
Even with the previous fix, we still are reading the iovecs once
to determine SGs needed, and then again later on. Preallocating
space for sg lists as part of rds_message seemed like a good idea
but it might be better to not do this. While working to redo that
code, this patch attempts to protect against userspace rewriting
the rds_iovec array between the first and second accesses.

The consequences of this would be either a too-small or too-large
sg list array. Too large is not an issue. This patch changes all
callers of message_alloc_sgs to handle running out of preallocated
sgs, and fail gracefully.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30 16:34:18 -07:00
stephen hemminger ff51bf8415 rds: make local functions/variables static
The RDS protocol has lots of functions that should be
declared static. rds_message_get/add_version_extension is
removed since it defined but never used.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 04:26:39 -07:00
Chris Mason 7e3f2952ee rds: don't let RDS shutdown a connection while senders are present
This is the first in a long line of patches that tries to fix races
between RDS connection shutdown and RDS traffic.

Here we are maintaining a count of active senders to make sure
the connection doesn't go away while they are using it.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-09-08 18:15:09 -07:00
Chris Mason c83188dcd7 rds: per-rm flush_wait waitq
This removes a global waitqueue used to wait for rds messages
and replaces it with a waitqueue inside the rds_message struct.

The global waitqueue turns into a global lock and significantly
bottlenecks operations on large machines.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-09-08 18:12:27 -07:00
Andy Grover a40aa9233a RDS: Do wait_event_interruptible instead of wait_event
Can't see a reason not to allow signals to interrupt the wait.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:12:22 -07:00
Andy Grover ab1a6926f5 RDS: rds_message_unmapped() doesn't need to check if queue active
If the queue has nobody on it, then wake_up does nothing.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:12:19 -07:00
Andy Grover f2ec76f288 RDS: Use NOWAIT in message_map_pages()
Can no longer block, so use NOWAIT.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:12:17 -07:00
Andy Grover ee4c7b47e4 RDS: Add a warning if trying to allocate 0 sgs
rds_message_alloc_sgs() only works when nents is nonzero.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:12:03 -07:00
Andy Grover 372cd7dedf RDS: Do not set op_active in r_m_copy_from_user().
Do not allocate sgs for data for 0-length datagrams

Set data.op_active in rds_sendmsg() instead of
rds_message_copy_from_user().

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:12:02 -07:00
Andy Grover 6c7cc6e469 RDS: Rename data op members prefix from m_ to op_
For consistency.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:11:59 -07:00
Andy Grover f8b3aaf2ba RDS: Remove struct rds_rdma_op
A big changeset, but it's all pretty dumb.

struct rds_rdma_op was already embedded in struct rm_rdma_op.
Remove rds_rdma_op and put its members in rm_rdma_op. Rename
members with "op_" prefix instead of "r_", for consistency.

Of course this breaks a lot, so fixup the code accordingly.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:11:58 -07:00
Andy Grover d0ab25a83c RDS: purge atomic resources too in rds_message_purge()
Add atomic_free_op function, analogous to rdma_free_op,
and call it in rds_message_purge().

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:11:57 -07:00
Andy Grover 241eef3e2f RDS: Implement silent atomics
Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:11:55 -07:00
Andy Grover d37c935905 RDS: Move loop-only function to loop.c
Also, try to better-document the locking around the
rm and its m_inc in loop.c.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:11:54 -07:00
Andy Grover 809fa148a2 RDS: inc_purge() transport function unused - remove it
Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:11:46 -07:00
Andy Grover f4dd96f7b2 RDS: make sure all sgs alloced are initialized
rds_message_alloc_sgs() now returns correctly-initialized
sg lists, so calleds need not do this themselves.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:11:39 -07:00
Andy Grover ff87e97a9d RDS: make m_rdma_op a member of rds_message
This eliminates a separate memory alloc, although
it is now necessary to add an "r_active" flag, since
it is no longer to use the m_rdma_op pointer as an
indicator of if an rdma op is present.

rdma SGs allocated from rm sg pool.

rds_rm_size also gets bigger. It's a little inefficient to
run through CMSGs twice, but it makes later steps a lot smoother.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:11:38 -07:00
Andy Grover 21f79afa5f RDS: fold rdma.h into rds.h
RDMA is now an intrinsic part of RDS, so it's easier to just have
a single header.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:11:37 -07:00
Andy Grover fc445084f1 RDS: Explicitly allocate rm in sendmsg()
r_m_copy_from_user used to allocate the rm as well as kernel
buffers for the data, and then copy the data in. Now, sendmsg()
allocates the rm, although the data buffer alloc still happens
in r_m_copy_from_user.

SGs are still allocated with rm, but now r_m_alloc_sgs() is
used to reserve them. This allows multiple SG lists to be
allocated from the one rm -- this is important once we also
want to alloc our rdma sgl from this pool.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:11:36 -07:00
Andy Grover e779137aa7 RDS: break out rdma and data ops into nested structs in rds_message
Clearly separate rdma-related variables in rm from data-related ones.
This is in anticipation of adding atomic support.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:11:33 -07:00
Andy Grover 8690bfa17a RDS: cleanup: remove "== NULL"s and "!= NULL"s in ptr comparisons
Favor "if (foo)" style over "if (foo != NULL)".

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:11:32 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Joe Perches f64f9e7192 net: Move && and || to end of previous line
Not including net/atm/

Compiled tested x86 allyesconfig only
Added a > 80 column line or two, which I ignored.
Existing checkpatch plaints willfully, cheerfully ignored.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 16:55:45 -08:00
Andy Grover 616b757ae1 RDS: Export symbols from core RDS
Now that rdma and tcp transports will be modularized,
we need to export a number of functions so they can call them.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23 19:13:07 -07:00
Andy Grover 7875e18e09 RDS: Message parsing
Parsing of newly-received RDS message headers (including ext.
headers) and copy-to/from-user routines.

page.c implements a per-cpu page remainder cache, to reduce the
number of allocations needed for small datagrams.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26 23:39:28 -08:00