Commit graph

15 commits

Author SHA1 Message Date
Nishanth Menon
aace66b170 mailbox: Introduce TI message manager driver
Support for TI Message Manager Module. This hardware block manages a
bunch of hardware queues meant for communication between processor
entities.

Clients sitting on top of this would manage the required protocol
for communicating with the counterpart entities.

For more details on TI Message Manager hardware block, see documentation
that will is available here: http://www.ti.com/lit/ug/spruhy8/spruhy8.pdf
Chapter 8.1(Message Manager)

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-03-21 20:33:15 +05:30
Caesar Wang
f70ed3b5dc mailbox: rockchip: Add Rockchip mailbox driver
This driver is found on RK3368 SoCs.

The Mailbox module is a simple APB peripheral that allows both
the Cortex-A53 MCU system to communicate by writing operation to
generate interrupt.
The registers are accessible by both CPU via APB interface.

The Mailbox has the following main features:

1) Support dual-core system: Cortex-A53 and MCU.
2) Support APB interface.
3) Support four mailbox elements, each element includes one data word,
   one command word register and one flag bit that can represent
   one interrupt.
4) Four interrupts to Cortex-A53.
5) Four interrupts to MCU.
6) Provide 32 lock registers for software to use to indicate whether
   mailbox is occupied.

[Jassi: Removed unused variable buf_base]

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-03-11 10:40:06 +07:00
Leo Yan
9c384189f5 mailbox: Hi6220: add mailbox driver
Add driver for Hi6220 mailbox, the mailbox communicates with MCU; for
sending data, it can support two methods for low level implementation:
one is to use interrupt as acknowledge, another is automatic mode which
without any acknowledge. These two methods have been supported in the
driver. For receiving data, it will depend on the interrupt to notify
the channel has incoming message.

Now mailbox driver is used to send message to MCU to control dynamic
voltage and frequency scaling for CPU, GPU and DDR.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-03-04 12:32:20 +05:30
Duc Dang
f700e84f41 mailbox: Add support for APM X-Gene platform mailbox driver
X-Gene mailbox controller provides 8 mailbox channels, with
each channel has a dedicated interrupt line.

Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Duc Dang <dhdang@apm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-02-15 13:20:03 +05:30
Lee Jones
8ea4484d0c mailbox: Add generic mechanism for testing Mailbox Controllers
This particular Client implementation uses shared memory in order
to pass messages between Mailbox users; however, it can be easily
hacked to support any type of Controller.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2015-10-17 10:36:56 +05:30
Lee Jones
9ef4546cbd mailbox: Add support for ST's Mailbox IP
ST's platforms currently support a maximum of 5 Mailboxes, one for
each of the supported co-processors situated on the platform.  Each
Mailbox is divided up into 4 instances which consist of 32 channels.
Messages are passed between the application and co-processors using
shared memory areas.  It is the Client's responsibility to manage
these areas.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2015-10-17 10:36:56 +05:30
Lubomir Rintel
0bae6af6d7 mailbox: Enable BCM2835 mailbox support
This mailbox driver provides a single mailbox channel to write 32-bit
values to the VPU and get a 32-bit response.  The Raspberry Pi
firmware uses this mailbox channel to implement firmware calls, while
Roku 2 (despite being derived from the same firmware tree) doesn't.

The driver was originally submitted by Lubomir, based on the
out-of-tree 2708 mailbox driver.  Eric Anholt fixed it up for
upstreaming, with the major functional change being that it now has no
notion of multiple channels (since that is a firmware-dependent
concept) and instead the raspberrypi-firmware driver will do that
bit-twiddling in its own messages.
[Jassi: made the 'mbox_chan_ops' struct as const and removed a redundant
variable]

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Craig McGeachie <slapdau@yahoo.com.au>
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2015-06-11 22:19:40 +05:30
Jassi Brar
ee23d66af9 mailbox: arm_mhu: add driver for ARM MHU controller
Add driver for the ARM Primecell Message-Handling-Unit(MHU) controller.

Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
Signed-off-by: Vincent Yang <vincent.yang@socionext.com>
Signed-off-by: Tetsuya Nuriya <nuriya.tetsuya@socionext.com>
2015-03-17 11:12:01 +05:30
Ley Foon Tan
f62092f6d7 mailbox: Add Altera mailbox driver
The Altera mailbox allows for interprocessor communication. It supports
only one channel and work as either sender or receiver.

Signed-off-by: Ley Foon Tan <lftan@altera.com>
2015-02-06 10:58:27 +05:30
Ashwin Chaugule
86c22f8c9a Mailbox: Add support for Platform Communication Channel
ACPI 5.0+ spec defines a generic mode of communication
between the OS and a platform such as the BMC. This medium
(PCC) is typically used by CPPC (ACPI CPU Performance management),
RAS (ACPI reliability protocol) and MPST (ACPI Memory power
states).

This patch adds PCC support as a Mailbox Controller. As of
ACPI v5.1 there is no provision for clients to lookup mailbox
controllers in a way that Linux expects. e.g. in DT the clients
can list the mailboxes they can associate with in the DT binding
and then provide a unique index to lookup a channel within a mailbox.
Since the ACPI spec doesn't have anything similar, we introduce a
mailbox controller specific API so that when the client calls it,
we know to lookup in the context of a specific controller. This
also helps in keeping a consistent interface across DT and ACPI
for such drivers.

This patch implements basic PCC support using the ACPI v5.1
structures. IRQ mode support will be provided as follow up patches.

Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-27 12:51:09 +05:30
Jassi Brar
2b6d83e2b8 mailbox: Introduce framework for mailbox
Introduce common framework for client/protocol drivers and
controller drivers of Inter-Processor-Communication (IPC).

Client driver developers should have a look at
 include/linux/mailbox_client.h to understand the part of
the API exposed to client drivers.
Similarly controller driver developers should have a look
at include/linux/mailbox_controller.h

Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-10-08 10:39:41 +05:30
Suman Anna
5040f53438 mailbox/omap: consolidate OMAP mailbox driver
There is no need for a separate common OMAP mailbox module
now that the OMAP1 mailbox driver has been removed. So,
consolidate the two individual OMAP mailbox modules into a
single driver. This streamlines the driver for converting
to mailbox framework.

The following are the main changes:
- collapse mailbox-omap2.c into omap-mailbox.c
- remove omap_mbox_ops and replace the ops calls with
  the equivalent functionality.
- simplify the sub-mailbox startup/shutdown functionality,
  the one-time operations are moved into probe, and the
  pm_runtime_get_sync and pm_runtime_put_sync can be invoked
  without using a configuration counter.
- move all definitions from private omap_mbox.h into the
  source code, and eliminate this internal header.
- rename some variables that used the omap2_mbox prefix with
  a generic omap_mbox prefix.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-29 01:57:25 -07:00
Suman Anna
79859094e5 mailbox/omap: remove OMAP1 mailbox driver
There are no existing users for OMAP1 mailbox driver
in kernel. Commit ab6f775 "Removing dead OMAP_DSP"
has cleaned up all the dead code related to the only
possible user, including the creation of the mailbox
platform device.

Remove this stale driver so that the OMAP mailbox
driver can be simplified and streamlined better for
converting to mailbox framework.

Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-29 01:55:09 -07:00
Suman Anna
c869c75c16 mailbox/omap: move the OMAP mailbox framework to drivers
The mailbox hardware (in OMAP) uses a queued mailbox interrupt
mechanism that provides a communication channel between processors
through a set of registers and their associated interrupt signals
by sending and receiving messages.

The OMAP mailbox framework/driver code is moved to be under
drivers/mailbox, in preparation for adapting to a common mailbox
driver framework. This allows the build for OMAP mailbox to be
enabled (it was disabled during the multi-platform support).

As part of the migration from plat and mach code:
- Kconfig symbols have been renamed to build OMAP1 or OMAP2+ drivers.
- mailbox.h under plat-omap/plat/include has been split into a public
  and private header files. The public header has only the API related
  functions and types.
- The module name mailbox.ko from plat-omap is changed to
  omap-mailbox.ko
- The module name mailbox_mach.ko from mach-omapX is changed as
    mailbox_omap1.ko for OMAP1
    mailbox_omap2.ko for OMAP2+

Cc: Tony Lindgren <tony@atomide.com>
[gregkh@linuxfoundation.org: ack for staging part]
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
2013-06-11 11:41:51 -05:00
Rob Herring
300586778d ARM / highbank: add support for pl320 IPC
The pl320 IPC allows for interprocessor communication between the
highbank A9 and the EnergyCore Management Engine. The pl320 implements
a straightforward mailbox protocol.

Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-02 00:01:15 +01:00