At some point in between sending this patch to the list and merging it
into for-next, the tracepoints got all mixed up because I've
over-reliant on automated tools not sucking. The end result is that the
tracepoints are all wrong, so fix them.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Prior to commit 7ac2ff8bb3, when we loaded the incore perag structure
with information from the AGF header, we would set or clear the
pagf_agfl_reset field based on whether or not the AGFL list was
misaligned within the block. IOWs, it's an incore state bit that's
supposed to cache something in the ondisk metadata. Therefore, the code
still needs to support clearing the incore bit if (somehow) the AGFL
were to correct itself.
It turns out that xfs_repair does exactly this -- phase 4 loads the AGF
to scan the rmapbt for corrupt records, which can set NEEDS_AGFL_RESET.
The scan unsets AGF_INIT but doesn't unset NEEDS_AGFL_RESET. Phase 5
totally rewrites the AGFL and fixes the alignment problem, didn't clear
NEEDS_AGFL_RESET historically, and reloads the perag state to fix the
freelist. This results in the AGFL being reset based on stale data,
which then causes the new AGFL blocks to be leaked. A subsequent
xfs_repair -n then complains about the leaks.
One could argue that phase 5 ought to clear this bit directly when it
reloads the perag AGF data after rewriting the AGFL, but libxfs used to
handle this for us, so it should go back to doing that.
Found by fuzzing flfirst = ones in xfs/352.
Fixes: 7ac2ff8bb3 ("xfs: perags need atomic operational state")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
There are now five separate space allocator interfaces exposed to the
rest of XFS for five different strategies to find space. Add
tracepoints for each of them so that I can tell from a trace dump
exactly which ones got called and what happened underneath them. Add a
sixth so it's more obvious if an allocation actually happened.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Callers of xfs_alloc_vextent_iterate_ags that pass in the TRYLOCK flag
want us to perform a non-blocking scan of the AGs for free space. There
are no ordering constraints for non-blocking AGF lock acquisition, so
the scan can freely start over at AG 0 even when minimum_agno > 0.
This manifests fairly reliably on xfs/294 on 6.3-rc2 with the parent
pointer patchset applied and the realtime volume enabled. I observed
the following sequence as part of an xfs_dir_createname call:
0. Fragment the free space, then allocate nearly all the free space in
all AGs except AG 0.
1. Create a directory in AG 2 and let it grow for a while.
2. Try to allocate 2 blocks to expand the dirent part of a directory.
The space will be allocated out of AG 0, but the allocation will not
be contiguous. This (I think) activates the LOWMODE allocator.
3. The bmapi call decides to convert from extents to bmbt format and
tries to allocate 1 block. This allocation request calls
xfs_alloc_vextent_start_ag with the inode number, which starts the
scan at AG 2. We ignore AG 0 (with all its free space) and instead
scrape AG 2 and 3 for more space. We find one block, but this now
kicks t_highest_agno to 3.
4. The createname call decides it needs to split the dabtree. It tries
to allocate even more space with xfs_alloc_vextent_start_ag, but now
we're constrained to AG 3, and we don't find the space. The
createname returns ENOSPC and the filesystem shuts down.
This change fixes the problem by making the trylock scan wrap around to
AG 0 if it doesn't like the AGs that it finds. Since the current
transaction itself holds AGF 0, the trylock of AGF 0 will succeed, and
we take space from the AG that has plenty.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In porting his development branch to 6.3-rc1, yours truly has
repeatedly screwed up the args->pag being fed to the xfs_alloc_vextent*
functions. Add some debugging assertions to test the preconditions
required of the callers.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Prior to the removal of xfs_ialloc_next_ag, we would increment the agi
rotor and return the *old* value. atomic_inc_return returns the new
value, which causes mkfs to allocate the root directory in AG 1. Put
back the old behavior (at least for mkfs) by subtracting 1 here.
Fixes: 20a5eab49d ("xfs: convert xfs_ialloc_next_ag() to an atomic")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that the filestreams AG selection tracks active perags, we need
to return an active perag to the core allocator code. This is
because the file allocation the filestreams code will run are AG
specific allocations and so need to pin the AG until the allocations
complete.
We cannot rely on the filestreams item reference to do this - the
filestreams association can be torn down at any time, hence we
need to have a separate reference for the allocation process to pin
the AG after it has been selected.
This means there is some perag juggling in allocation failure
fallback paths as they will do all AG scans in the case the AG
specific allocation fails. Hence we need to track the perag
reference that the filestream allocator returned to make sure we
don't leak it on repeated allocation failure.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
xfs_bmap_btalloc_filestreams() calls two filestreams functions to
select the AG to allocate from. Both those functions end up in
the same selection function that iterates all AGs multiple times.
Worst case, xfs_bmap_btalloc_filestreams() can iterate all AGs 4
times just to select the initial AG to allocate in.
Move the AG selection to fs/xfs/xfs_filestreams.c as a single
interface so that the inefficient AG interation is contained
entirely within the filestreams code. This will allow the
implementation to be simplified and made more efficient in future
patches.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
The code in xfs_bmap_longest_free_extent() is open coded in
xfs_filestream_pick_ag(). Export xfs_bmap_longest_free_extent and
call it from the filestreams code instead.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
It is only set if reading the AGF gets a EAGAIN error. Just return
the EAGAIN error and handle that error in the callers.
This means we can remove the not_init parameter from
xfs_bmap_select_minlen(), too, because the use of not_init there is
pessimistic. If we can't read the agf, it won't increase blen.
The only time we actually care whether we checked all the AGFs for
contiguous free space is when the best length is less than the
minimum allocation length. If not_init is set, then we ignore blen
and set the minimum alloc length to the absolute minimum, not the
best length we know already is present.
However, if blen is less than the minimum we're going to ignore it
anyway, regardless of whether we scanned all the AGFs or not. Hence
not_init can go away, because we only use if blen is good from
the scanned AGs otherwise we ignore it altogether and use minlen.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
There's many if (filestreams) {} else {} branches in this function.
Split it out into a filestreams specific function so that we can
then work directly on cleaning up the filestreams code without
impacting the rest of the allocation algorithms.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Now that the AG iteration code in the core allocation code has been
cleaned up, we can easily convert it to use a for_each_perag..()
variant to use active references and skip AGs that it can't get
active references on.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
All of the allocation functions now extract the minimum allowed AG
from the transaction and then use it in some way. The allocation
functions that are restricted to a single AG all check if the
AG requested can be allocated from and return an error if so. These
all set args->agno appropriately.
All the allocation functions that iterate AGs use it to calculate
the scan start AG. args->agno is not set until the iterator starts
walking AGs.
Hence we can easily set up a conditional check against the minimum
AG allowed in xfs_alloc_vextent_check_args() based on whether
args->agno contains NULLAGNUMBER or not and move all the repeated
setup code to xfs_alloc_vextent_check_args(), further simplifying
the allocation functions.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
We don't need the multiplexing xfs_alloc_ag_vextent() provided
anymore - we can just call the exact/near/size variants directly.
This allows us to remove args->type completely and stop using
args->fsbno as an input to the allocator algorithms.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Move it from xfs_alloc_ag_vextent() so we can get rid of that layer.
Rename xfs_alloc_vextent_set_fsbno() to xfs_alloc_vextent_finish()
to indicate that it's function is finishing off the allocation that
we've run now that it contains much more functionality.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Now that we have wrapper functions for each type of allocation we
can ask for, we can start unravelling xfs_alloc_ag_vextent(). That
is essentially just a prepare stage, the allocation multiplexer
and a post-allocation accounting step is the allocation proceeded.
The current xfs_alloc_vextent*() wrappers all have a prepare stage,
the allocation operation and a post-allocation accounting step.
We can consolidate this by moving the AG alloc prep code into the
wrapper functions, the accounting code in the wrapper accounting
functions, and cut out the multiplexer layer entirely.
This patch consolidates the AG preparation stage.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Two of the callers to xfs_alloc_vextent_this_ag() actually want
exact block number allocation, not anywhere-in-ag allocation. Split
this out from _this_ag() as a first class citizen so no external
extent allocation code needs to care about args->type anymore.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
The remaining callers of xfs_alloc_vextent() are all doing NEAR_BNO
allocations. We can replace that function with a new
xfs_alloc_vextent_near_bno() function that does this explicitly.
We also multiplex NEAR_BNO allocations through
xfs_alloc_vextent_this_ag via args->type. Replace all of these with
direct calls to xfs_alloc_vextent_near_bno(), too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Change obvious callers of single AG allocation to use
xfs_alloc_vextent_start_bno(). Callers no long need to specify
XFS_ALLOCTYPE_START_BNO, and so the type can be driven inward and
removed.
While doing this, also pass the allocation target fsb as a parameter
rather than encoding it in args->fsbno.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Change obvious callers of single AG allocation to use
xfs_alloc_vextent_first_ag(). This gets rid of
XFS_ALLOCTYPE_FIRST_AG as the type used within
xfs_alloc_vextent_first_ag() during iteration is _THIS_AG. Hence we
can remove the setting of args->type from all the callers of
_first_ag() and remove the alloctype.
While doing this, pass the allocation target fsb as a parameter
rather than encoding it in args->fsbno. This starts the process
of making args->fsbno an output only variable rather than
input/output.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
There are several different contexts xfs_bmap_btalloc() handles, and
large chunks of the code execute independent allocation contexts.
Try to untangle this mess a bit.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Change obvious callers of single AG allocation to use
xfs_alloc_vextent_this_ag(). Drive the per-ag grabbing out to the
callers, too, so that callers with active references don't need
to do new lookups just for an allocation in a context that already
has a perag reference.
The only remaining caller that does single AG allocation through
xfs_alloc_vextent() is xfs_bmap_btalloc() with
XFS_ALLOCTYPE_NEAR_BNO. That is going to need more untangling before
it can be converted cleanly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
There's a bit of a recursive conundrum around
xfs_alloc_ag_vextent(). We can't first call xfs_alloc_ag_vextent()
without preparing the AGFL for the allocation, and preparing the
AGFL calls xfs_alloc_ag_vextent() to prepare the AGFL for the
allocation. This "double allocation" requirement is not really clear
from the current xfs_alloc_fix_freelist() calls that are sprinkled
through the allocation code.
It's not helped that xfs_alloc_ag_vextent() can actually allocate
from the AGFL itself, but there's special code to prevent AGFL prep
allocations from allocating from the free list it's trying to prep.
The naming is also not consistent: args->wasfromfl is true when we
allocated _from_ the free list, but the indication that we are
allocating _for_ the free list is via checking that (args->resv ==
XFS_AG_RESV_AGFL).
So, lets make this "allocation required for allocation" situation
clear by moving it all inside xfs_alloc_ag_vextent(). The freelist
allocation is a specific XFS_ALLOCTYPE_THIS_AG allocation, which
translated directly to xfs_alloc_ag_vextent_size() allocation.
This enables us to replace __xfs_alloc_vextent_this_ag() with a call
to xfs_alloc_ag_vextent(), and we drive the freelist fixing further
into the per-ag allocation algorithm.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
The core of the per-ag iteration is effectively doing a "this ag"
allocation on one AG at a time. Use the same code to implement the
core "this ag" allocation in both xfs_alloc_vextent_this_ag()
and xfs_alloc_vextent_iterate_ags().
This means we only call xfs_alloc_ag_vextent() from one place so we
can easily collapse the call stack in future patches.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
It's a multiplexing mess that can be greatly simplified, and really
needs to be simplified to allow active per-ag references to
propagate from initial AG selection code the the bmapi code.
This splits the code out into separate a parameter checking
function, an iterator function, and allocation completion functions
and then implements the individual policies using these functions.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
In several places we iterate every AG from a specific start agno and
wrap back to the first AG when we reach the end of the filesystem to
continue searching. We don't have a primitive for this iteration
yet, so add one for conversion of these algorithms to per-ag based
iteration.
The filestream AG select code is a mess, and this initially makes it
worse. The per-ag selection needs to be driven completely into the
filestream code to clean this up and it will be done in a future
patch that makes the filestream allocator use active per-ag
references correctly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
We currently don't have any flags or operational state in the
xfs_perag except for the pagf_init and pagi_init flags. And the
agflreset flag. Oh, there's also the pagf_metadata and pagi_inodeok
flags, too.
For controlling per-ag operations, we are going to need some atomic
state flags. Hence add an opstate field similar to what we already
have in the mount and log, and convert all these state flags across
to atomic bit operations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
This is currently a spinlock lock protected rotor which can be
implemented with a single atomic operation. Change it to be more
efficient and get rid of the m_agirotor_lock. Noticed while
converting the inode allocation AG selection loop to active perag
references.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Lots of code in the inobt infrastructure is passed both xfs_mount
and perags. We only need perags for the per-ag inode allocation
code, so reduce the duplication by passing only the perags as the
primary object.
This ends up reducing the code size by a bit:
text data bss dec hex filename
orig 1138878 323979 548 1463405 16546d (TOTALS)
patched 1138709 323979 548 1463236 1653c4 (TOTALS)
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Convert the inode allocation routines to use active perag references
or references held by callers rather than grab their own. Also drive
the perag further inwards to replace xfs_mounts when doing
operations on a specific AG.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Callers have referenced perags but they don't pass it into
xfs_imap() so it takes it's own reference. Fix that so we can change
inode allocation over to using active references.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
So that they all output the same information in the traces to make
debugging refcount issues easier.
This means that all the lookup/drop functions no longer need to use
the full memory barrier atomic operations (atomic*_return()) so
will have less overhead when tracing is off. The set/clear tag
tracepoints no longer abuse the reference count to pass the tag -
the tag being cleared is obvious from the _RET_IP_ that is recorded
in the trace point.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
We need to be able to dynamically remove instantiated AGs from
memory safely, either for shrinking the filesystem or paging AG
state in and out of memory (e.g. supporting millions of AGs). This
means we need to be able to safely exclude operations from accessing
perags while dynamic removal is in progress.
To do this, introduce the concept of active and passive references.
Active references are required for high level operations that make
use of an AG for a given operation (e.g. allocation) and pin the
perag in memory for the duration of the operation that is operating
on the perag (e.g. transaction scope). This means we can fail to get
an active reference to an AG, hence callers of the new active
reference API must be able to handle lookup failure gracefully.
Passive references are used in low level code, where we might need
to access the perag structure for the purposes of completing high
level operations. For example, buffers need to use passive
references because:
- we need to be able to do metadata IO during operations like grow
and shrink transactions where high level active references to the
AG have already been blocked
- buffers need to pin the perag until they are reclaimed from
memory, something that high level code has no direct control over.
- unused cached buffers should not prevent a shrink from being
started.
Hence we have active references that will form exclusion barriers
for operations to be performed on an AG, and passive references that
will prevent reclaim of the perag until all objects with passive
references have been reclaimed themselves.
This patch introduce xfs_perag_grab()/xfs_perag_rele() as the API
for active AG reference functionality. We also need to convert the
for_each_perag*() iterators to use active references, which will
start the process of converting high level code over to using active
references. Conversion of non-iterator based code to active
references will be done in followup patches.
Note that the implementation using reference counting is really just
a development vehicle for the API to ensure we don't have any leaks
in the callers. Once we need to remove perag structures from memory
dyanmically, we will need a much more robust per-ag state transition
mechanism for preventing new references from being taken while we
wait for existing references to drain before removal from memory can
occur....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
The tp->t_firstblock field is now raelly tracking the highest AG we
have locked, not the block number of the highest allocation we've
made. It's purpose is to prevent AGF locking deadlocks, so rename it
to "highest AG" and simplify the implementation to just track the
agno rather than a fsbno.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Now that xfs_alloc_vextent() does all the AGF deadlock prevention
filtering for multiple allocations in a single transaction, we no
longer need the allocation setup code to care about what AGs we
might already have locked.
Hence we can remove all the "nullfb" conditional logic in places
like xfs_bmap_btalloc() and instead have them focus simply on
setting up locality constraints. If the allocation fails due to
AGF lock filtering in xfs_alloc_vextent, then we just fall back as
we normally do to more relaxed allocation constraints.
As a result, any allocation that allows AG scanning (i.e. not
confined to a single AG) and does not force a worst case full
filesystem scan will now be able to attempt allocation from AGs
lower than that defined by tp->t_firstblock. This is because
xfs_alloc_vextent() allows try-locking of the AGFs and hence enables
low space algorithms to at least -try- to get space from AGs lower
than the one that we have currently locked and allocated from. This
is a significant improvement in the low space allocation algorithm.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
When we enter xfs_bmbt_alloc_block() without having first allocated
a data extent (i.e. tp->t_firstblock == NULLFSBLOCK) because we
are doing something like unwritten extent conversion, the transaction
block reservation is used as the minleft value.
This works for operations like unwritten extent conversion, but it
assumes that the block reservation is only for a BMBT split. THis is
not always true, and sometimes results in larger than necessary
minleft values being set. We only actually need enough space for a
btree split, something we already handle correctly in
xfs_bmapi_write() via the xfs_bmapi_minleft() calculation.
We should use xfs_bmapi_minleft() in xfs_bmbt_alloc_block() to
calculate the number of blocks a BMBT split on this inode is going to
require, not use the transaction block reservation that contains the
maximum number of blocks this transaction may consume in it...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
When an XFS filesystem has free inodes in chunks already allocated
on disk, it will still allocate new inode chunks if the target AG
has no free inodes in it. Normally, this is a good idea as it
preserves locality of all the inodes in a given directory.
However, at ENOSPC this can lead to using the last few remaining
free filesystem blocks to allocate a new chunk when there are many,
many free inodes that could be allocated without consuming free
space. This results in speeding up the consumption of the last few
blocks and inode create operations then returning ENOSPC when there
free inodes available because we don't have enough block left in the
filesystem for directory creation reservations to proceed.
Hence when we are near ENOSPC, we should be attempting to preserve
the remaining blocks for directory block allocation rather than
using them for unnecessary inode chunk creation.
This particular behaviour is exposed by xfs/294, when it drives to
ENOSPC on empty file creation whilst there are still thousands of
free inodes available for allocation in other AGs in the filesystem.
Hence, when we are within 1% of ENOSPC, change the inode allocation
behaviour to prefer to use existing free inodes over allocating new
inode chunks, even though it results is poorer locality of the data
set. It is more important for the allocations to be space efficient
near ENOSPC than to have optimal locality for performance, so lets
modify the inode AG selection code to reflect that fact.
This allows generic/294 to not only pass with this allocator rework
patchset, but to increase the number of post-ENOSPC empty inode
allocations to from ~600 to ~9080 before we hit ENOSPC on the
directory create transaction reservation.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
I've recently encountered an ABBA deadlock with g/476. The upcoming
changes seem to make this much easier to hit, but the underlying
problem is a pre-existing one.
Essentially, if we select an AG for allocation, then lock the AGF
and then fail to allocate for some reason (e.g. minimum length
requirements cannot be satisfied), then we drop out of the
allocation with the AGF still locked.
The caller then modifies the allocation constraints - usually
loosening them up - and tries again. This can result in trying to
access AGFs that are lower than the AGF we already have locked from
the failed attempt. e.g. the failed attempt skipped several AGs
before failing, so we have locks an AG higher than the start AG.
Retrying the allocation from the start AG then causes us to violate
AGF lock ordering and this can lead to deadlocks.
The deadlock exists even if allocation succeeds - we can do a
followup allocations in the same transaction for BMBT blocks that
aren't guaranteed to be in the same AG as the original, and can move
into higher AGs. Hence we really need to move the tp->t_firstblock
tracking down into xfs_alloc_vextent() where it can be set when we
exit with a locked AG.
xfs_alloc_vextent() can also check there if the requested
allocation falls within the allow range of AGs set by
tp->t_firstblock. If we can't allocate within the range set, we have
to fail the allocation. If we are allowed to to non-blocking AGF
locking, we can ignore the AG locking order limitations as we can
use try-locks for the first iteration over requested AG range.
This invalidates a set of post allocation asserts that check that
the allocation is always above tp->t_firstblock if it is set.
Because we can use try-locks to avoid the deadlock in some
circumstances, having a pre-existing locked AGF doesn't always
prevent allocation from lower order AGFs. Hence those ASSERTs need
to be removed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
When we split a BMBT due to record insertion, we offload it to a
worker thread because we can be deep in the stack when we try to
allocate a new block for the BMBT. Allocation can use several
kilobytes of stack (full memory reclaim, swap and/or IO path can
end up on the stack during allocation) and we can already be several
kilobytes deep in the stack when we need to split the BMBT.
A recent workload demonstrated a deadlock in this BMBT split
offload. It requires several things to happen at once:
1. two inodes need a BMBT split at the same time, one must be
unwritten extent conversion from IO completion, the other must be
from extent allocation.
2. there must be a no available xfs_alloc_wq worker threads
available in the worker pool.
3. There must be sustained severe memory shortages such that new
kworker threads cannot be allocated to the xfs_alloc_wq pool for
both threads that need split work to be run
4. The split work from the unwritten extent conversion must run
first.
5. when the BMBT block allocation runs from the split work, it must
loop over all AGs and not be able to either trylock an AGF
successfully, or each AGF is is able to lock has no space available
for a single block allocation.
6. The BMBT allocation must then attempt to lock the AGF that the
second task queued to the rescuer thread already has locked before
it finds an AGF it can allocate from.
At this point, we have an ABBA deadlock between tasks queued on the
xfs_alloc_wq rescuer thread and a locked AGF. i.e. The queued task
holding the AGF lock can't be run by the rescuer thread until the
task the rescuer thread is runing gets the AGF lock....
This is a highly improbably series of events, but there it is.
There's a couple of ways to fix this, but the easiest way to ensure
that we only punt tasks with a locked AGF that holds enough space
for the BMBT block allocations to the worker thread.
This works for unwritten extent conversion in IO completion (which
doesn't have a locked AGF and space reservations) because we have
tight control over the IO completion stack. It is typically only 6
functions deep when xfs_btree_split() is called because we've
already offloaded the IO completion work to a worker thread and
hence we don't need to worry about stack overruns here.
The other place we can be called for a BMBT split without a
preceeding allocation is __xfs_bunmapi() when punching out the
center of an existing extent. We don't remove extents in the IO
path, so these operations don't tend to be called with a lot of
stack consumed. Hence we don't really need to ship the split off to
a worker thread in these cases, either.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Pass the incore refcount intent through the CUI logging code instead of
repeatedly boxing and unboxing parameters.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Pass the incore rmap space mapping through the RUI logging code instead
of repeatedly boxing and unboxing parameters.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Change the name of all pointers to xfs_extent_item structures to "xefi"
to make the name consistent and because the current selections ("new"
and "free") mean other things in C.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Instead of repeatedly boxing and unboxing the incore extent mapping
structure as it passes through the BUI code, pass the pointer directly
through.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Lately I've been stress-testing extreme-sized rmap btrees by using the
(new) xfs_db bmap_inflate command to clone bmbt mappings billions of
times and then using xfs_repair to build new rmap and refcount btrees.
This of course is /much/ faster than actually FICLONEing a file billions
of times.
Unfortunately, xfs_repair fails in xfs_btree_bload_compute_geometry with
EOVERFLOW, which indicates that xfs_mount.m_rmap_maxlevels is not
sufficiently large for the test scenario. For a 1TB filesystem (~67
million AG blocks, 4 AGs) the btheight command reports:
$ xfs_db -c 'btheight -n 4400801200 -w min rmapbt' /dev/sda
rmapbt: worst case per 4096-byte block: 84 records (leaf) / 45 keyptrs (node)
level 0: 4400801200 records, 52390491 blocks
level 1: 52390491 records, 1164234 blocks
level 2: 1164234 records, 25872 blocks
level 3: 25872 records, 575 blocks
level 4: 575 records, 13 blocks
level 5: 13 records, 1 block
6 levels, 53581186 blocks total
The AG is sufficiently large to build this rmap btree. Unfortunately,
m_rmap_maxlevels is 5. Augmenting the loop in the space->height
function to report height, node blocks, and blocks remaining produces
this:
ht 1 node_blocks 45 blockleft 67108863
ht 2 node_blocks 2025 blockleft 67108818
ht 3 node_blocks 91125 blockleft 67106793
ht 4 node_blocks 4100625 blockleft 67015668
final height: 5
The goal of this function is to compute the maximum height btree that
can be stored in the given number of ondisk fsblocks. Starting with the
top level of the tree, each iteration through the loop adds the fanout
factor of the next level down until we run out of blocks. IOWs, maximum
height is achieved by using the smallest fanout factor that can apply
to that level.
However, the loop setup is not correct. Top level btree blocks are
allowed to contain fewer than minrecs items, so the computation is
incorrect because the first time through the loop it should be using a
fanout factor of 2. With this corrected, the above becomes:
ht 1 node_blocks 2 blockleft 67108863
ht 2 node_blocks 90 blockleft 67108861
ht 3 node_blocks 4050 blockleft 67108771
ht 4 node_blocks 182250 blockleft 67104721
ht 5 node_blocks 8201250 blockleft 66922471
final height: 6
Fixes: 9ec691205e ("xfs: compute the maximum height of the rmap btree when reflink enabled")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
- Fix a race condition w.r.t. percpu inode free counters
- Fix a broken error return in xfs_remove
- Print FS UUID at mount/unmount time
- Numerous fixes to the online fsck code
- Fix inode locking inconsistency problems when dealing with realtime
metadata files
- Actually merge pull requests so that we capture the cover letter
contents
- Fix a race between rebuilding VFS inode state and the AIL flushing
inodes that could cause corrupt inodes to be written to the
filesystem
- Fix a data corruption problem resulting from a write() to an
unwritten extent racing with writeback started on behalf of memory
reclaim changing the extent state
- Add debugging knobs so that we can test iomap invalidation
- Fix the blockdev pagecache contents being stale after unmounting the
filesystem, leading to spurious xfs_db errors and corrupt metadumps
- Fix a file mapping corruption bug due to ilock cycling when attaching
dquots to a file during delalloc reservation
- Fix a refcount btree corruption problem due to the refcount
adjustment code not handling MAXREFCOUNT correctly, resulting in
unnecessary record splits
- Fix COW staging extent alloctions not being classified as USERDATA,
which results in filestreams being ignored and possible data
corruption if the allocation was filled from the AGFL and the block
buffer is still being tracked in the AIL
- Fix new duplicated includes
- Fix a race between the dquot shrinker and dquot freeing that could
cause a UAF
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----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=plES
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.2-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull XFS updates from Darrick Wong:
"The highlight of this is a batch of fixes for the online metadata
checking code as we start the loooong march towards merging online
repair. I aim to merge that in time for the 2023 LTS.
There are also a large number of data corruption and race condition
fixes in this patchset. Most notably fixed are write() calls to
unwritten extents racing with writeback, which required some late(r
than I prefer) code changes to iomap to support the necessary
revalidations. I don't really like iomap changes going in past -rc4,
but Dave and I have been working on it long enough that I chose to
push it for 6.2 anyway.
There are also a number of other subtle problems fixed, including the
log racing with inode writeback to write inodes with incorrect link
count to disk; file data mapping corruptions as a result of incorrect
lock cycling when attaching dquots; refcount metadata corruption if
one actually manages to share a block 2^32 times; and the log
clobbering cow staging extents if they were formerly metadata blocks.
Summary:
- Fix a race condition w.r.t. percpu inode free counters
- Fix a broken error return in xfs_remove
- Print FS UUID at mount/unmount time
- Numerous fixes to the online fsck code
- Fix inode locking inconsistency problems when dealing with realtime
metadata files
- Actually merge pull requests so that we capture the cover letter
contents
- Fix a race between rebuilding VFS inode state and the AIL flushing
inodes that could cause corrupt inodes to be written to the
filesystem
- Fix a data corruption problem resulting from a write() to an
unwritten extent racing with writeback started on behalf of memory
reclaim changing the extent state
- Add debugging knobs so that we can test iomap invalidation
- Fix the blockdev pagecache contents being stale after unmounting
the filesystem, leading to spurious xfs_db errors and corrupt
metadumps
- Fix a file mapping corruption bug due to ilock cycling when
attaching dquots to a file during delalloc reservation
- Fix a refcount btree corruption problem due to the refcount
adjustment code not handling MAXREFCOUNT correctly, resulting in
unnecessary record splits
- Fix COW staging extent alloctions not being classified as USERDATA,
which results in filestreams being ignored and possible data
corruption if the allocation was filled from the AGFL and the block
buffer is still being tracked in the AIL
- Fix new duplicated includes
- Fix a race between the dquot shrinker and dquot freeing that could
cause a UAF"
* tag 'xfs-6.2-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (50 commits)
xfs: dquot shrinker doesn't check for XFS_DQFLAG_FREEING
xfs: Remove duplicated include in xfs_iomap.c
xfs: invalidate xfs_bufs when allocating cow extents
xfs: get rid of assert from xfs_btree_islastblock
xfs: estimate post-merge refcounts correctly
xfs: hoist refcount record merge predicates
xfs: fix super block buf log item UAF during force shutdown
xfs: wait iclog complete before tearing down AIL
xfs: attach dquots to inode before reading data/cow fork mappings
xfs: shut up -Wuninitialized in xfsaild_push
xfs: use memcpy, not strncpy, to format the attr prefix during listxattr
xfs: invalidate block device page cache during unmount
xfs: add debug knob to slow down write for fun
xfs: add debug knob to slow down writeback for fun
xfs: drop write error injection is unfixable, remove it
xfs: use iomap_valid method to detect stale cached iomaps
iomap: write iomap validity checks
xfs: xfs_bmap_punch_delalloc_range() should take a byte range
iomap: buffered write failure should not truncate the page cache
xfs,iomap: move delalloc punching to iomap
...
While investigating test failures in xfs/17[1-3] in alwayscow mode, I
noticed through code inspection that xfs_bmap_alloc_userdata isn't
setting XFS_ALLOC_USERDATA when allocating extents for a file's CoW
fork. COW staging extents should be flagged as USERDATA, since user
data are persisted to these blocks before being remapped into a file.
This mis-classification has a few impacts on the behavior of the system.
First, the filestreams allocator is supposed to keep allocating from a
chosen AG until it runs out of space in that AG. However, it only does
that for USERDATA allocations, which means that COW allocations aren't
tied to the filestreams AG. Fortunately, few people use filestreams, so
nobody's noticed.
A more serious problem is that xfs_alloc_ag_vextent_small looks for a
buffer to invalidate *if* the USERDATA flag is set and the AG is so full
that the allocation had to come from the AGFL because the cntbt is
empty. The consequences of not invalidating the buffer are severe --
if the AIL incorrectly checkpoints a buffer that is now being used to
store user data, that action will clobber the user's written data.
Fix filestreams and yet another data corruption vector by flagging COW
allocations as USERDATA.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
xfs_btree_check_block contains debugging knobs. With XFS_DEBUG setting up,
turn on the debugging knob can trigger the assert of xfs_btree_islastblock,
test script as follows:
while true
do
mount $disk $mountpoint
fsstress -d $testdir -l 0 -n 10000 -p 4 >/dev/null
echo 1 > /sys/fs/xfs/sda/errortag/btree_chk_sblk
sleep 10
umount $mountpoint
done
Kick off fsstress and only *then* turn on the debugging knob. If it
happens that the knob gets turned on after the cntbt lookup succeeds
but before the call to xfs_btree_islastblock, then we *can* end up in
the situation where a previously checked btree block suddenly starts
returning EFSCORRUPTED from xfs_btree_check_block. Kaboom.
Darrick give a very detailed explanation as follows:
Looking back at commit 27d9ee577d, I think the point of all this was
to make sure that the cursor has actually performed a lookup, and that
the btree block at whatever level we're asking about is ok.
If the caller hasn't ever done a lookup, the bc_levels array will be
empty, so cur->bc_levels[level].bp pointer will be NULL. The call to
xfs_btree_get_block will crash anyway, so the "ASSERT(block);" part is
pointless.
If the caller did a lookup but the lookup failed due to block
corruption, the corresponding cur->bc_levels[level].bp pointer will also
be NULL, and we'll still crash. The "ASSERT(xfs_btree_check_block);"
logic is also unnecessary.
If the cursor level points to an inode root, the block buffer will be
incore, so it had better always be consistent.
If the caller ignores a failed lookup after a successful one and calls
this function, the cursor state is garbage and the assert wouldn't have
tripped anyway. So get rid of the assert.
Fixes: 27d9ee577d ("xfs: actually check xfs_btree_check_block return in xfs_btree_islastblock")
Signed-off-by: Guo Xuenan <guoxuenan@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Upon enabling fsdax + reflink for XFS, xfs/179 began to report refcount
metadata corruptions after being run. Specifically, xfs_repair noticed
single-block refcount records that could be combined but had not been.
The root cause of this is improper MAXREFCOUNT edge case handling in
xfs_refcount_merge_extents. When we're trying to find candidates for a
refcount btree record merge, we compute the refcount attribute of the
merged record, but we fail to account for the fact that once a record
hits rc_refcount == MAXREFCOUNT, it is pinned that way forever. Hence
the computed refcount is wrong, and we fail to merge the extents.
Fix this by adjusting the merge predicates to compute the adjusted
refcount correctly.
Fixes: 3172725814 ("xfs: adjust refcount of an extent of blocks in refcount btree")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Xiao Yang <yangx.jy@fujitsu.com>
Hoist these multiline conditionals into separate static inline helpers
to improve readability and set the stage for corruption fixes that will
be introduced in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Xiao Yang <yangx.jy@fujitsu.com>
Add a new error injection knob so that we can arbitrarily slow down
pagecache writes to test for race conditions and aberrant reclaim
behavior if the writeback mechanisms are slow to issue writeback. This
will enable functional testing for the ifork sequence counters
introduced in commit 304a68b9c6 ("xfs: use iomap_valid method to
detect stale cached iomaps") that fixes write racing with reclaim
writeback.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
