Commit graph

22 commits

Author SHA1 Message Date
Tejun Heo
137d3edb48 sg: reimplement sg mapping iterator
This is alternative implementation of sg content iterator introduced
by commit 83e7d317... from Pierre Ossman in next-20080716.  As there's
already an sg iterator which iterates over sg entries themselves, name
this sg_mapping_iterator.

Slightly edited description from the original implementation follows.

Iteration over a sg list is not that trivial when you take into
account that memory pages might have to be mapped before being used.
Unfortunately, that means that some parts of the kernel restrict
themselves to directly accesible memory just to not have to deal with
the mess.

This patch adds a simple iterator system that allows any code to
easily traverse an sg list and not have to deal with all the details.
The user can decide to consume part of the iteration.  Also, iteration
can be stopped and resumed later if releasing the kmap between
iteration steps is necessary.  These features are useful to implement
piecemeal sg copying for interrupt drive PIO for example.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23 14:42:09 +02:00
FUJITA Tomonori
b1adaf65ba [SCSI] block: add sg buffer copy helper functions
This patch adds new three helper functions to copy data between an SG
list and a linear buffer.

- sg_copy_from_buffer copies data from linear buffer to an SG list

- sg_copy_to_buffer copies data from an SG list to a linear buffer

When the APIs copy data from a linear buffer to an SG list,
flush_kernel_dcache_page is called. It's not necessary for everyone
but it's a no-op on most architectures and in general the API is not
used in performance critical path.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:45 -05:00
James Bottomley
7cedb1f17f SG: work with the SCSI fixed maximum allocations.
SCSI sg table allocation has a maximum size (of SCSI_MAX_SG_SEGMENTS,
currently 128) and this will cause a BUG_ON() in SCSI if something
tries an allocation over it.  This patch adds a size limit to the
chaining allocator to allow the specification of the maximum
allocation size for chaining, so we always chain in units of the
maximum SCSI allocation size.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:54:49 +01:00
Jens Axboe
0db9299f48 SG: Move functions to lib/scatterlist.c and add sg chaining allocator helpers
Manually doing chained sg lists is not trivial, so add some helpers
to make sure that drivers get it right.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:05:27 +01:00
Rusty Russell
b801a1e7db Don't blatt first element of prv in sg_chain()
I realize that sg chaining is a ploy to make the rest of the kernel
devs feel the pain of the SCSI subsystem.  But this was a little
unsubtle.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-11 10:12:55 +01:00
Tejun Heo
645a8d9462 scatterlist: add more safeguards
Add more safeguards to protect against misinterpreting a chain entry
as a normal scatterlist and vice-versa.

* Make sure the entry isn't a chain when assigning and reading a
  normal sg.

* Clear offset and length when chaining.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-27 09:30:39 +01:00
Jens Axboe
c46f2334c8 [SG] Get rid of __sg_mark_end()
sg_mark_end() overwrites the page_link information, but all users want
__sg_mark_end() behaviour where we just set the end bit. That is the most
natural way to use the sg list, since you'll fill it in and then mark the
end point.

So change sg_mark_end() to only set the termination bit. Add a sg_magic
debug check as well, and clear a chain pointer if it is set.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-02 08:47:06 +01:00
Jens Axboe
013fb33972 SG: Make sg_init_one() use general table init functions
Don't open code sg_init_one(), make it reuse sg_init_table().

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-02 08:47:06 +01:00
Chuck Lever
513f54b78f sg_init_table() should use unsigned loop index variable
Clean up: fix a mixed sign comparison in sg_init_table() accidentally
introduced by commit d6ec0842.  The sign of the loop index variable
should match the sign of the "nents" argument.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2007-10-29 09:18:04 +01:00
Chuck Lever
74eb94f7b8 sg_last() should use unsigned loop index variable
Clean up: fix a mixed sign comparison in sg_last() accidentally
introduced by commit 70eb8040.  The sign of the loop index variable
should match the sign of the "nents" argument.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2007-10-29 09:18:04 +01:00
Jens Axboe
73fd546aa7 SG: clear termination bit in sg_chain()
Since we are using the last entry in the list, clear any possible
termination bit that may have already been set. Pointed out by Rusty.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-29 09:18:03 +01:00
Hugh Dickins
85cdffcde0 fix sg_phys to use dma_addr_t
x86_32 CONFIG_HIGHMEM64G with 5GB RAM hung when booting, after issuing
some "request_module: runaway loop modprobe binfmt-0000" messages in
trying to exec /sbin/init.

The binprm buf doesn't see the right ".ELF" header because sg_phys()
is providing the wrong physical addresses for high pages: a 32-bit
unsigned long is too small in this case, we need to use dma_addr_t.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-25 09:55:05 +02:00
Jens Axboe
642f149031 SG: Change sg_set_page() to take length and offset argument
Most drivers need to set length and offset as well, so may as well fold
those three lines into one.

Add sg_assign_page() for those two locations that only needed to set
the page, where the offset/length is set outside of the function context.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-24 11:20:47 +02:00
Jens Axboe
de26103de5 [SG] Add debug check for page alignment
Suggested by Boaz Harrosh <bharrosh@panasas.com>

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23 20:35:58 +02:00
Jens Axboe
d6ec084200 Add CONFIG_DEBUG_SG sg validation
Add a Kconfig entry which will toggle some sanity checks on the sg
entry and tables.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22 21:20:03 +02:00
Jens Axboe
18dabf473e Change table chaining layout
Change the page member of the scatterlist structure to be an unsigned
long, and encode more stuff in the lower bits:

- Bits 0 and 1 zero: this is a normal sg entry. Next sg entry is located
  at sg + 1.
- Bit 0 set: this is a chain entry, the next real entry is at ->page_link
  with the two low bits masked off.
- Bit 1 set: this is the final entry in the sg entry. sg_next() will return
  NULL when passed such an entry.

It's thus important that sg table users use the proper accessors to get
and set the page member.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22 21:20:01 +02:00
Jens Axboe
82f66fbef5 [SG] Add helpers for manipulating SG entries
We can then transition drivers without changing the generated code.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22 17:07:37 +02:00
Jens Axboe
70eb8040dc Add chained sg support to linux/scatterlist.h
The core of the patch - allow the last sg element in a scatterlist
table to point to the start of a new table. We overload the LSB of
the page pointer to indicate whether this is a valid sg entry, or
merely a link to the next list.

Includes a fix from Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
correcting the ifdef ARCH_HAS_SG_CHAIN guarding sg_last().

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:08:51 +02:00
Jens Axboe
96b418c960 Add sg helpers for iterating over a scatterlist table
First step to being able to change the scatterlist setup without
having to modify drivers (a lot :-)

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:07:10 +02:00
Herbert Xu
03fd9cee7f [PATCH] scatterlist: Add const to sg_set_buf/sg_init_one pointer argument
This patch adds a const modifier to the buf argument of sg_set_buf and
sg_init_one.  This lets people call it with pointers that are const.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-21 11:46:16 +10:00
Herbert Xu
d32311fed7 [PATCH] Introduce sg_set_buf
sg_init_one is a nice tool for the block layer.  However, users
of struct scatterlist in other subsystems don't usually need the
DMA attributes.  For them it's a waste of time and space to
initialise the whole struct scatterlist structure.

Therefore this patch adds a new function sg_set_buf to initialise
a scatterlist without zeroing the DMA attributes.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2005-10-30 11:14:39 +11:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00