The inode timestamps use 34 bits in ext4, but the various timestamps in
the superblock are limited to 32 bits. If every user accesses these as
'unsigned', then this is good until year 2106, but it seems better to
extend this a bit further in the process of removing the deprecated
get_seconds() function.
This adds another byte for each timestamp in the superblock, making
them long enough to store timestamps beyond what is in the inodes,
which seems good enough here (in ocfs2, they are already 64-bit wide,
which is appropriate for a new layout).
I did not modify e2fsprogs, which obviously needs the same change to
actually interpret future timestamps correctly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 8844618d8a: "ext4: only look at the bg_flags field if it is
valid" will complain if block group zero does not have the
EXT4_BG_INODE_ZEROED flag set. Unfortunately, this is not correct,
since a freshly created file system has this flag cleared. It gets
almost immediately after the file system is mounted read-write --- but
the following somewhat unlikely sequence will end up triggering a
false positive report of a corrupted file system:
mkfs.ext4 /dev/vdc
mount -o ro /dev/vdc /vdc
mount -o remount,rw /dev/vdc
Instead, when initializing the inode table for block group zero, test
to make sure that itable_unused count is not too large, since that is
the case that will result in some or all of the reserved inodes
getting cleared.
This fixes the failures reported by Eric Whiteney when running
generic/230 and generic/231 in the the nojournal test case.
Fixes: 8844618d8a ("ext4: only look at the bg_flags field if it is valid")
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add defines for STAT_READ and STAT_WRITE for indexing the partition
stat entries. This clarifies some fs/ code which has hardcoded 1 for
STAT_WRITE and will make it easier to extend the stats with additional
fields.
tj: Refreshed on top of v4.17.
Signed-off-by: Michael Callahan <michaelcallahan@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Previously, when an MMP-protected file system is remounted read-only,
the kmmpd thread would exit the next time it woke up (a few seconds
later), without resetting the MMP sequence number back to
EXT4_MMP_SEQ_CLEAN.
Fix this by explicitly killing the MMP thread when the file system is
remounted read-only.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger@dilger.ca>
Ext4_check_descriptors() was getting called before s_gdb_count was
initialized. So for file systems w/o the meta_bg feature, allocation
bitmaps could overlap the block group descriptors and ext4 wouldn't
notice.
For file systems with the meta_bg feature enabled, there was a
fencepost error which would cause the ext4_check_descriptors() to
incorrectly believe that the block allocation bitmap overlaps with the
block group descriptor blocks, and it would reject the mount.
Fix both of these problems.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
maliciously crafted file system image can result in a kernel OOPS or
hang. At least one fix addresses an inline data bug could be
triggered by userspace without the need of a crafted file system
(although it does require that the inline data feature be enabled).
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAltBmcYACgkQ8vlZVpUN
gaPDJgf/cEa9QuiYTbNOmcOMorK9LEk5XO8qsiJdUVNQtLsHZfl0QowbkF9/F/W5
andTJzNpFvXeLADMTTjpsDnQ90i8LKD11Kol3dPJcMhJhELtQsjxUBguxpQBP86R
dvHuCl2/AaqX7rr6Co80yYSinRCquqkzJNhdM5/MLNGziSpkQL3dPSs93rmV+YbU
8DkUwmhDhoiToLBTLaldrAsAzKvor3uyjNPJ3qhxeE2kXrnuI1V4XfstBGjhVKFB
/5aYWexDZkL5qiCo+lZnqdITqUnPx3uAkUdBn0dj7V+nDow+/R/8nApvlvJu6usF
OfMoKr098/pmPAjE5aZ8QpBNVtLFpg==
=njzR
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"Bug fixes for ext4; most of which relate to vulnerabilities where a
maliciously crafted file system image can result in a kernel OOPS or
hang.
At least one fix addresses an inline data bug could be triggered by
userspace without the need of a crafted file system (although it does
require that the inline data feature be enabled)"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: check superblock mapped prior to committing
ext4: add more mount time checks of the superblock
ext4: add more inode number paranoia checks
ext4: avoid running out of journal credits when appending to an inline file
jbd2: don't mark block as modified if the handle is out of credits
ext4: never move the system.data xattr out of the inode body
ext4: clear i_data in ext4_inode_info when removing inline data
ext4: include the illegal physical block in the bad map ext4_error msg
ext4: verify the depth of extent tree in ext4_find_extent()
ext4: only look at the bg_flags field if it is valid
ext4: make sure bitmaps and the inode table don't overlap with bg descriptors
ext4: always check block group bounds in ext4_init_block_bitmap()
ext4: always verify the magic number in xattr blocks
ext4: add corruption check in ext4_xattr_set_entry()
ext4: add warn_on_error mount option
This patch attempts to close a hole leading to a BUG seen with hot
removals during writes [1].
A block device (NVME namespace in this test case) is formatted to EXT4
without partitions. It's mounted and write I/O is run to a file, then
the device is hot removed from the slot. The superblock attempts to be
written to the drive which is no longer present.
The typical chain of events leading to the BUG:
ext4_commit_super()
__sync_dirty_buffer()
submit_bh()
submit_bh_wbc()
BUG_ON(!buffer_mapped(bh));
This fix checks for the superblock's buffer head being mapped prior to
syncing.
[1] https://www.spinics.net/lists/linux-ext4/msg56527.html
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
The kernel's ext4 mount-time checks were more permissive than
e2fsprogs's libext2fs checks when opening a file system. The
superblock is considered too insane for debugfs or e2fsck to operate
on it, the kernel has no business trying to mount it.
This will make file system fuzzing tools work harder, but the failure
cases that they find will be more useful and be easier to evaluate.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
If there is a directory entry pointing to a system inode (such as a
journal inode), complain and declare the file system to be corrupted.
Also, if the superblock's first inode number field is too small,
refuse to mount the file system.
This addresses CVE-2018-10882.
https://bugzilla.kernel.org/show_bug.cgi?id=200069
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
The bg_flags field in the block group descripts is only valid if the
uninit_bg or metadata_csum feature is enabled. We were not
consistently looking at this field; fix this.
Also block group #0 must never have uninitialized allocation bitmaps,
or need to be zeroed, since that's where the root inode, and other
special inodes are set up. Check for these conditions and mark the
file system as corrupted if they are detected.
This addresses CVE-2018-10876.
https://bugzilla.kernel.org/show_bug.cgi?id=199403
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
It's really bad when the allocation bitmaps and the inode table
overlap with the block group descriptors, since it causes random
corruption of the bg descriptors. So we really want to head those off
at the pass.
https://bugzilla.kernel.org/show_bug.cgi?id=199865
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
algorithms. Yes, Speck is contrversial, but the intention is to use
them only for the lowest end Android devices, where the alternative
*really* is no encryption at all for data stored at rest.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlsW/RAACgkQ8vlZVpUN
gaO1pwf/WOusoXBK5sUuiC8d9I5s+OlPhTKhrh+BcL7/xhOkyh2xDv2FEwsjhwUf
qo26AMf7DsWKWgJ6wDQ1z+PIuPSNeQy5dCKbz2hbfNjET3vdk2NuvPWnIbFrmIek
LB6Ii9jKlPJRO4T3nMrE9JzJZLsoX5OKRSgYTT3EviuW/wSXaFyi7onFnyKXBnF/
e689tE50P42PgTEDKs4RDw43PwEGbcl5Vtj+Lnoh6VGX/pYvL/9ZbEYlKrgqSOU4
DmckR8D8UU/Gy6G5bvMsVuJpLEU7vBxupOOHI/nJFwR6tuYi0Q1j7C/zH8BvWp5e
o8P5GpOWk7Gm346FaUlkAZ+25bCU+A==
=EBeE
-----END PGP SIGNATURE-----
Merge tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt
Pull fscrypt updates from Ted Ts'o:
"Add bunch of cleanups, and add support for the Speck128/256
algorithms.
Yes, Speck is contrversial, but the intention is to use them only for
the lowest end Android devices, where the alternative *really* is no
encryption at all for data stored at rest"
* tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: log the crypto algorithm implementations
fscrypt: add Speck128/256 support
fscrypt: only derive the needed portion of the key
fscrypt: separate key lookup from key derivation
fscrypt: use a common logging function
fscrypt: remove internal key size constants
fscrypt: remove unnecessary check for non-logon key type
fscrypt: make fscrypt_operations.max_namelen an integer
fscrypt: drop empty name check from fname_decrypt()
fscrypt: drop max_namelen check from fname_decrypt()
fscrypt: don't special-case EOPNOTSUPP from fscrypt_get_encryption_info()
fscrypt: don't clear flags on crypto transform
fscrypt: remove stale comment from fscrypt_d_revalidate()
fscrypt: remove error messages for skcipher_request_alloc() failure
fscrypt: remove unnecessary NULL check when allocating skcipher
fscrypt: clean up after fscrypt_prepare_lookup() conversions
fs, fscrypt: only define ->s_cop when FS_ENCRYPTION is enabled
fscrypt: use unbound workqueue for decryption
- Strengthen inode number and structure validation when allocating inodes.
- Reduce pointless buffer allocations during cache miss
- Use FUA for pure data O_DSYNC directio writes
- Various iomap refactorings
- Strengthen quota metadata verification to avoid unfixable broken quota
- Make AGFL block freeing a deferred operation to avoid blowing out
transaction reservations when running complex operations
- Get rid of the log item descriptors to reduce log overhead
- Fix various reflink bugs where inodes were double-joined to
transactions
- Don't issue discards when trimming unwritten extents
- Refactor incore dquot initialization and retrieval interfaces
- Fix some locking problmes in the quota scrub code
- Strengthen btree structure checks in scrub code
- Rewrite swapfile activation to use iomap and support unwritten extents
- Make scrub exit to userspace sooner when corruptions or
cross-referencing problems are found
- Make scrub invoke the data fork scrubber directly on metadata inodes
- Don't do background reclamation of post-eof and cow blocks when the fs
is suspended
- Fix secondary superblock buffer lifespan hinting
- Refactor growfs to use table-dispatched functions instead of long
stringy functions
- Move growfs code to libxfs
- Implement online fs label getting and setting
- Introduce online filesystem repair (in a very limited capacity)
- Fix unit conversion problems in the realtime freemap iteration
functions
- Various refactorings and cleanups in preparation to remove buffer
heads in a future release
- Reimplement the old bmap call with iomap
- Remove direct buffer head accesses from seek hole/data
- Various bug fixes
-----BEGIN PGP SIGNATURE-----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=11pr
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.18-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"New features this cycle include the ability to relabel mounted
filesystems, support for fallocated swapfiles, and using FUA for pure
data O_DSYNC directio writes. With this cycle we begin to integrate
online filesystem repair and refactor the growfs code in preparation
for eventual subvolume support, though the road ahead for both
features is quite long.
There are also numerous refactorings of the iomap code to remove
unnecessary log overhead, to disentangle some of the quota code, and
to prepare for buffer head removal in a future upstream kernel.
Metadata validation continues to improve, both in the hot path
veifiers and the online filesystem check code. I anticipate sending a
second pull request in a few days with more metadata validation
improvements.
This series has been run through a full xfstests run over the weekend
and through a quick xfstests run against this morning's master, with
no major failures reported.
Summary:
- Strengthen inode number and structure validation when allocating
inodes.
- Reduce pointless buffer allocations during cache miss
- Use FUA for pure data O_DSYNC directio writes
- Various iomap refactorings
- Strengthen quota metadata verification to avoid unfixable broken
quota
- Make AGFL block freeing a deferred operation to avoid blowing out
transaction reservations when running complex operations
- Get rid of the log item descriptors to reduce log overhead
- Fix various reflink bugs where inodes were double-joined to
transactions
- Don't issue discards when trimming unwritten extents
- Refactor incore dquot initialization and retrieval interfaces
- Fix some locking problmes in the quota scrub code
- Strengthen btree structure checks in scrub code
- Rewrite swapfile activation to use iomap and support unwritten
extents
- Make scrub exit to userspace sooner when corruptions or
cross-referencing problems are found
- Make scrub invoke the data fork scrubber directly on metadata
inodes
- Don't do background reclamation of post-eof and cow blocks when the
fs is suspended
- Fix secondary superblock buffer lifespan hinting
- Refactor growfs to use table-dispatched functions instead of long
stringy functions
- Move growfs code to libxfs
- Implement online fs label getting and setting
- Introduce online filesystem repair (in a very limited capacity)
- Fix unit conversion problems in the realtime freemap iteration
functions
- Various refactorings and cleanups in preparation to remove buffer
heads in a future release
- Reimplement the old bmap call with iomap
- Remove direct buffer head accesses from seek hole/data
- Various bug fixes"
* tag 'xfs-4.18-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (121 commits)
fs: use ->is_partially_uptodate in page_cache_seek_hole_data
fs: remove the buffer_unwritten check in page_seek_hole_data
fs: move page_cache_seek_hole_data to iomap.c
xfs: use iomap_bmap
iomap: add an iomap-based bmap implementation
iomap: add a iomap_sector helper
iomap: use __bio_add_page in iomap_dio_zero
iomap: move IOMAP_F_BOUNDARY to gfs2
iomap: fix the comment describing IOMAP_NOWAIT
iomap: inline data should be an iomap type, not a flag
mm: split ->readpages calls to avoid non-contiguous pages lists
mm: return an unsigned int from __do_page_cache_readahead
mm: give the 'ret' variable a better name __do_page_cache_readahead
block: add a lower-level bio_add_page interface
xfs: fix error handling in xfs_refcount_insert()
xfs: fix xfs_rtalloc_rec units
xfs: strengthen rtalloc query range checks
xfs: xfs_rtbuf_get should check the bmapi_read results
xfs: xfs_rtword_t should be unsigned, not signed
dax: change bdev_dax_supported() to support boolean returns
...
The function return values are confusing with the way the function is
named. We expect a true or false return value but it actually returns
0/-errno. This makes the code very confusing. Changing the return values
to return a bool where if DAX is supported then return true and no DAX
support returns false.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Change bdev_dax_supported so it takes a bdev parameter. This enables
multi-device filesystems like xfs to check that a dax device can work for
the particular filesystem. Once that's in place, actually fix all the
parts of XFS where we need to be able to distinguish between datadev and
rtdev.
This patch fixes the problem where we screw up the dax support checking
in xfs if the datadev and rtdev have different dax capabilities.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
[rez: Re-added __bdev_dax_supported() for !CONFIG_FS_DAX cases]
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
This reserved space isn't committed yet but cannot be used for allocations.
For userspace it has no difference from used space. XFS already does this.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Fixes: 689c958cbe ("ext4: add project quota support")
Now ->max_namelen() is only called to limit the filename length when
adding NUL padding, and only for real filenames -- not symlink targets.
It also didn't give the correct length for symlink targets anyway since
it forgot to subtract 'sizeof(struct fscrypt_symlink_data)'.
Thus, change ->max_namelen from a function to a simple 'unsigned int'
that gives the filesystem's maximum filename length.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since there are many places to set inode/block bitmap
corrupt bit, add a new helper for it, which will make
codes more clear.
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Previously, mount -l would show data=<mode> even if the ext4 default
journaling mode was being used. Change this to be consistent with the
rest of the options.
Ext4 already did the right thing when the journaling mode being used
matched the one specified in the superblock's default mount options. The
reason it failed to do the right thing for the ext4 defaults is that,
when set, they were never included in sbi->s_def_mount_opt (unlike the
superblock's defaults, which were).
Signed-off-by: Tyson Nottingham <tgnottingham@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Don't show init_itable=n in /proc/fs/ext4/<dev>/options when filesystem
is mounted with noinit_itable.
Signed-off-by: Tyson Nottingham <tgnottingham@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously, /proc/fs/ext4/<dev>/options would only show binary options
if they were set (1 in the options bit mask). E.g. it would show "grpid"
if it was set, but it would not show "nogrpid" if grpid was not set.
This seems sensible, but when an option is absent from the file, it can
be hard for the unfamiliar to know what is being used. E.g. if there
isn't a (no)grpid entry, nogrpid is in effect. But if there isn't a
(no)auto_da_alloc entry, auto_da_alloc is in effect. If there isn't a
(minixdf|bsddf) entry, it turns out bsddf is in effect. It all depends
on how the option is implemented.
It's clearer to be explicit, so print the corresponding option
regardless of whether it means a 1 or a 0 in the bit mask.
Note that options which do not have an explicit disable option aren't
indicated as being disabled even with this change (e.g. dax).
Signed-off-by: Tyson Nottingham <tgnottingham@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If some metadata block, such as an allocation bitmap, overlaps the
superblock, it's very likely that if the file system is mounted
read/write, the results will not be pretty. So disallow r/w mounts
for file systems corrupted in this particular way.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
If mount is auto-probing for filesystem type, it will try various
filesystems in order, with the MS_SILENT flag set. We get
that flag as the silent arg to ext4_fill_super.
If we're probing (silent==1) then don't complain about feature
incompatibilities that are found if it looks like it's actually
a different valid extN type - failed probes should be silent
in this case.
If the on-disk features are unknown even to ext4, then complain.
Reported-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Tested-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Commit 16c5468859 ("ext4: Allow parallel DIO reads") reworked the way
locking happens around parallel dio reads. This resulted in obviating
the need for EXT4_STATE_DIOREAD_LOCK flag and accompanying logic.
Currently this amounts to dead code so let's remove it. No functional
changes
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
* Require struct page by default for filesystem DAX to remove a number of
surprising failure cases. This includes failures with direct I/O, gdb and
fork(2).
* Add support for the new Platform Capabilities Structure added to the NFIT in
ACPI 6.2a. This new table tells us whether the platform supports flushing
of CPU and memory controller caches on unexpected power loss events.
* Revamp vmem_altmap and dev_pagemap handling to clean up code and better
support future future PCI P2P uses.
* Deprecate the ND_IOCTL_SMART_THRESHOLD command whose payload has become
out-of-sync with recent versions of the NVDIMM_FAMILY_INTEL spec, and
instead rely on the generic ND_CMD_CALL approach used by the two other IOCTL
families, NVDIMM_FAMILY_{HPE,MSFT}.
* Enhance nfit_test so we can test some of the new things added in version 1.6
of the DSM specification. This includes testing firmware download and
simulating the Last Shutdown State (LSS) status.
-----BEGIN PGP SIGNATURE-----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=MIMX
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ross Zwisler:
- Require struct page by default for filesystem DAX to remove a number
of surprising failure cases. This includes failures with direct I/O,
gdb and fork(2).
- Add support for the new Platform Capabilities Structure added to the
NFIT in ACPI 6.2a. This new table tells us whether the platform
supports flushing of CPU and memory controller caches on unexpected
power loss events.
- Revamp vmem_altmap and dev_pagemap handling to clean up code and
better support future future PCI P2P uses.
- Deprecate the ND_IOCTL_SMART_THRESHOLD command whose payload has
become out-of-sync with recent versions of the NVDIMM_FAMILY_INTEL
spec, and instead rely on the generic ND_CMD_CALL approach used by
the two other IOCTL families, NVDIMM_FAMILY_{HPE,MSFT}.
- Enhance nfit_test so we can test some of the new things added in
version 1.6 of the DSM specification. This includes testing firmware
download and simulating the Last Shutdown State (LSS) status.
* tag 'libnvdimm-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (37 commits)
libnvdimm, namespace: remove redundant initialization of 'nd_mapping'
acpi, nfit: fix register dimm error handling
libnvdimm, namespace: make min namespace size 4K
tools/testing/nvdimm: force nfit_test to depend on instrumented modules
libnvdimm/nfit_test: adding support for unit testing enable LSS status
libnvdimm/nfit_test: add firmware download emulation
nfit-test: Add platform cap support from ACPI 6.2a to test
libnvdimm: expose platform persistence attribute for nd_region
acpi: nfit: add persistent memory control flag for nd_region
acpi: nfit: Add support for detect platform CPU cache flush on power loss
device-dax: Fix trailing semicolon
libnvdimm, btt: fix uninitialized err_lock
dax: require 'struct page' by default for filesystem dax
ext2: auto disable dax instead of failing mount
ext4: auto disable dax instead of failing mount
mm, dax: introduce pfn_t_special()
mm: Fix devm_memremap_pages() collision handling
mm: Fix memory size alignment in devm_memremap_pages_release()
memremap: merge find_dev_pagemap into get_dev_pagemap
memremap: change devm_memremap_pages interface to use struct dev_pagemap
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlp2R3AACgkQ8vlZVpUN
gaOIdAgApEdlFR2Gf93z2hMj5HxVL5rjkuPJVtVkKu0eH2HMQJyxNmjymrRfuFmM
8W1CrEvVKi5Aj6r8q4KHIdVV247Ya0SVEhLwKM0LX4CvlZUXmwgCmZ/MPDTXA1eq
C4vPVuJAuSNGNVYDlDs3+NiMHINGNVnBVQQFSPBP9P+iNWPD7o486712qaF8maVn
RbfbQ2rWtOIRdlAOD1U5WqgQku59lOsmHk2pc0+X4LHCZFpMoaO80JVjENPAw+BF
daRt6TX+WljMyx6DRIaszqau876CJhe/tqlZcCLOkpXZP0jJS13yodp26dVQmjCh
w8YdiY7uHK2D+S/8eyj7h7DIwzu3vg==
=ZjQP
-----END PGP SIGNATURE-----
Merge tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt
Pull fscrypt updates from Ted Ts'o:
"Refactor support for encrypted symlinks to move common code to fscrypt"
Ted also points out about the merge:
"This makes the f2fs symlink code use the fscrypt_encrypt_symlink()
from the fscrypt tree. This will end up dropping the kzalloc() ->
f2fs_kzalloc() change, which means the fscrypt-specific allocation
won't get tested by f2fs's kmalloc error injection system; which is
fine"
* tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: (26 commits)
fscrypt: fix build with pre-4.6 gcc versions
fscrypt: remove 'ci' parameter from fscrypt_put_encryption_info()
fscrypt: document symlink length restriction
fscrypt: fix up fscrypt_fname_encrypted_size() for internal use
fscrypt: define fscrypt_fname_alloc_buffer() to be for presented names
fscrypt: calculate NUL-padding length in one place only
fscrypt: move fscrypt_symlink_data to fscrypt_private.h
fscrypt: remove fscrypt_fname_usr_to_disk()
ubifs: switch to fscrypt_get_symlink()
ubifs: switch to fscrypt ->symlink() helper functions
ubifs: free the encrypted symlink target
f2fs: switch to fscrypt_get_symlink()
f2fs: switch to fscrypt ->symlink() helper functions
ext4: switch to fscrypt_get_symlink()
ext4: switch to fscrypt ->symlink() helper functions
fscrypt: new helper function - fscrypt_get_symlink()
fscrypt: new helper functions for ->symlink()
fscrypt: trim down fscrypt.h includes
fscrypt: move fscrypt_is_dot_dotdot() to fs/crypto/fname.c
fscrypt: move fscrypt_valid_enc_modes() to fscrypt_private.h
...
cache objects. This is good, but still leaves a lot of kernel memory
available to be copied to/from userspace in the face of bugs. To further
restrict what memory is available for copying, this creates a way to
whitelist specific areas of a given slab cache object for copying to/from
userspace, allowing much finer granularity of access control. Slab caches
that are never exposed to userspace can declare no whitelist for their
objects, thereby keeping them unavailable to userspace via dynamic copy
operations. (Note, an implicit form of whitelisting is the use of constant
sizes in usercopy operations and get_user()/put_user(); these bypass all
hardened usercopy checks since these sizes cannot change at runtime.)
This new check is WARN-by-default, so any mistakes can be found over the
next several releases without breaking anyone's system.
The series has roughly the following sections:
- remove %p and improve reporting with offset
- prepare infrastructure and whitelist kmalloc
- update VFS subsystem with whitelists
- update SCSI subsystem with whitelists
- update network subsystem with whitelists
- update process memory with whitelists
- update per-architecture thread_struct with whitelists
- update KVM with whitelists and fix ioctl bug
- mark all other allocations as not whitelisted
- update lkdtm for more sensible test overage
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Kees Cook <kees@outflux.net>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=tzmJ
-----END PGP SIGNATURE-----
Merge tag 'usercopy-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardened usercopy whitelisting from Kees Cook:
"Currently, hardened usercopy performs dynamic bounds checking on slab
cache objects. This is good, but still leaves a lot of kernel memory
available to be copied to/from userspace in the face of bugs.
To further restrict what memory is available for copying, this creates
a way to whitelist specific areas of a given slab cache object for
copying to/from userspace, allowing much finer granularity of access
control.
Slab caches that are never exposed to userspace can declare no
whitelist for their objects, thereby keeping them unavailable to
userspace via dynamic copy operations. (Note, an implicit form of
whitelisting is the use of constant sizes in usercopy operations and
get_user()/put_user(); these bypass all hardened usercopy checks since
these sizes cannot change at runtime.)
This new check is WARN-by-default, so any mistakes can be found over
the next several releases without breaking anyone's system.
The series has roughly the following sections:
- remove %p and improve reporting with offset
- prepare infrastructure and whitelist kmalloc
- update VFS subsystem with whitelists
- update SCSI subsystem with whitelists
- update network subsystem with whitelists
- update process memory with whitelists
- update per-architecture thread_struct with whitelists
- update KVM with whitelists and fix ioctl bug
- mark all other allocations as not whitelisted
- update lkdtm for more sensible test overage"
* tag 'usercopy-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (38 commits)
lkdtm: Update usercopy tests for whitelisting
usercopy: Restrict non-usercopy caches to size 0
kvm: x86: fix KVM_XEN_HVM_CONFIG ioctl
kvm: whitelist struct kvm_vcpu_arch
arm: Implement thread_struct whitelist for hardened usercopy
arm64: Implement thread_struct whitelist for hardened usercopy
x86: Implement thread_struct whitelist for hardened usercopy
fork: Provide usercopy whitelisting for task_struct
fork: Define usercopy region in thread_stack slab caches
fork: Define usercopy region in mm_struct slab caches
net: Restrict unwhitelisted proto caches to size 0
sctp: Copy struct sctp_sock.autoclose to userspace using put_user()
sctp: Define usercopy region in SCTP proto slab cache
caif: Define usercopy region in caif proto slab cache
ip: Define usercopy region in IP proto slab cache
net: Define usercopy region in struct proto slab cache
scsi: Define usercopy region in scsi_sense_cache slab cache
cifs: Define usercopy region in cifs_request slab cache
vxfs: Define usercopy region in vxfs_inode slab cache
ufs: Define usercopy region in ufs_inode_cache slab cache
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlp16xMACgkQ8vlZVpUN
gaP1IAf8C48AKVnqy6ftFphzV1CdeGHDwJLL63lChs97fNr1mxo5TZE/6vdYB55j
k7C7huQ582cEiGWQJ0U4/+En0hF85zkAk5mTfnSao5BqxLr9ANsAocwBUNBXdFSp
B7IyMo4Dct7NCkwfmKLPRcEqZ49vwyv99TqM/9wUkgUStkTjPT7bhHgarB6VPbhp
BxoXVnFYgU0sZN0y71IBt8ngWqCK6j7fjw3gsl37oEenG3/h3SO0H9ih1FrysX8S
VOwwLJq6vfAgEwQvZACnBwWKDYsZpH7akNp9WGeDMByo28t514RNRjIi0mvLHEZa
h72I8Sb3bwHO9MJNvHFe/0b1Say4vw==
=dxAX
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Only miscellaneous cleanups and bug fixes for ext4 this cycle"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: create ext4_kset dynamically
ext4: create ext4_feat kobject dynamically
ext4: release kobject/kset even when init/register fail
ext4: fix incorrect indentation of if statement
ext4: correct documentation for grpid mount option
ext4: use 'sbi' instead of 'EXT4_SB(sb)'
ext4: save error to disk in __ext4_grp_locked_error()
jbd2: fix sphinx kernel-doc build warnings
ext4: fix a race in the ext4 shutdown path
mbcache: make sure c_entry_count is not decremented past zero
ext4: no need flush workqueue before destroying it
ext4: fixed alignment and minor code cleanup in ext4.h
ext4: fix ENOSPC handling in DAX page fault handler
dax: pass detailed error code from dax_iomap_fault()
mbcache: revert "fs/mbcache.c: make count_objects() more robust"
mbcache: initialize entry->e_referenced in mb_cache_entry_create()
ext4: fix up remaining files with SPDX cleanups
Bring the ext4 filesystem in line with xfs that only warns and continues
when the "-o dax" option is specified to mount and the backing device
does not support dax. This is in preparation for removing dax support
from devices that do not enable get_user_pages() operations on dax
mappings. In other words 'gup' support is required and configurations
that were using so called 'page-less' dax will be converted back to
using the page cache.
Removing the broken 'page-less' dax support is a pre-requisite for
removing the "EXPERIMENTAL" warning when mounting a filesystem in dax
mode.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The ext4 symlink pathnames, stored in struct ext4_inode_info.i_data
and therefore contained in the ext4_inode_cache slab cache, need
to be copied to/from userspace.
cache object allocation:
fs/ext4/super.c:
ext4_alloc_inode(...):
struct ext4_inode_info *ei;
...
ei = kmem_cache_alloc(ext4_inode_cachep, GFP_NOFS);
...
return &ei->vfs_inode;
include/trace/events/ext4.h:
#define EXT4_I(inode) \
(container_of(inode, struct ext4_inode_info, vfs_inode))
fs/ext4/namei.c:
ext4_symlink(...):
...
inode->i_link = (char *)&EXT4_I(inode)->i_data;
example usage trace:
readlink_copy+0x43/0x70
vfs_readlink+0x62/0x110
SyS_readlinkat+0x100/0x130
fs/namei.c:
readlink_copy(..., link):
...
copy_to_user(..., link, len)
(inlined into vfs_readlink)
generic_readlink(dentry, ...):
struct inode *inode = d_inode(dentry);
const char *link = inode->i_link;
...
readlink_copy(..., link);
In support of usercopy hardening, this patch defines a region in the
ext4_inode_cache slab cache in which userspace copy operations are
allowed.
This region is known as the slab cache's usercopy region. Slab caches
can now check that each dynamically sized copy operation involving
cache-managed memory falls entirely within the slab's usercopy region.
This patch is modified from Brad Spengler/PaX Team's PAX_USERCOPY
whitelisting code in the last public patch of grsecurity/PaX based on my
understanding of the code. Changes or omissions from the original code are
mine and don't reflect the original grsecurity/PaX code.
Signed-off-by: David Windsor <dave@nullcore.net>
[kees: adjust commit log, provide usage trace]
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: linux-ext4@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
fscrypt_put_encryption_info() is only called when evicting an inode, so
the 'struct fscrypt_info *ci' parameter is always NULL, and there cannot
be races with other threads. This was cruft left over from the broken
key revocation code. Remove the unused parameter and the cmpxchg().
Also remove the #ifdefs around the fscrypt_put_encryption_info() calls,
since fscrypt_notsupp.h defines a no-op stub for it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We could use 'sbi' instead of 'EXT4_SB(sb)' to make code more elegant.
Signed-off-by: Jun Piao <piaojun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
In the function __ext4_grp_locked_error(), __save_error_info()
is called to save error info in super block block, but does not sync
that information to disk to info the subsequence fsck after reboot.
This patch writes the error information to disk. After this patch,
I think there is no obvious EXT4 error handle branches which leads to
"Remounting filesystem read-only" will leave the disk partition miss
the subsequence fsck.
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
destroy_workqueue() will do flushing work for us.
Signed-off-by: Jun Piao <piaojun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
A number of ext4 source files were skipped due because their copyright
permission statements didn't match the expected text used by the
automated conversion utilities. I've added SPDX tags for the rest.
While looking at some of these files, I've noticed that we have quite
a bit of variation on the licenses that were used --- in particular
some of the Red Hat licenses on the jbd2 files use a GPL2+ license,
and we have some files that have a LGPL-2.1 license (which was quite
surprising).
I've not attempted to do any license changes. Even if it is perfectly
legal to relicense to GPL 2.0-only for consistency's sake, that should
be done with ext4 developer community discussion.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This is a pure automated search-and-replace of the internal kernel
superblock flags.
The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.
Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.
The script to do this was:
# places to look in; re security/*: it generally should *not* be
# touched (that stuff parses mount(2) arguments directly), but
# there are two places where we really deal with superblock flags.
FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
include/linux/fs.h include/uapi/linux/bfs_fs.h \
security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
# the list of MS_... constants
SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
ACTIVE NOUSER"
SED_PROG=
for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done
# we want files that contain at least one of MS_...,
# with fs/namespace.c and fs/pnode.c excluded.
L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')
for f in $L; do sed -i $f $SED_PROG; done
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
two data corruption bugs involving DAX, as well as a corruption bug
after a crash during a racing fallocate and delayed allocation.
Finally, a number of cleanups and optimizations.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAloJCiEACgkQ8vlZVpUN
gaOahAgAhcgdPagn/B5w+6vKFdH+hOJLKyGI0adGDyWD9YBXN0wFQvliVgXrTKei
hxW2GdQGc6yHv9mOjvD+4Fn2AnTZk8F3GtG6zdqRM08JGF/IN2Jax2boczG/XnUz
rT9cd3ic2Ff0KaUX+Yos55QwomTh5CAeRPgvB69o9D6L4VJzTlsWKSOBR19FmrSG
NDmzZibgWmHcqzW9Bq8ZrXXx+KB42kUlc8tYYm2n6MTaE0LMvp3d9XcFcnm/I7Bk
MGa2d3/3FArGD6Rkl/E82MXMSElOHJnY6jGYSDaadUeMI5FXkA6tECOSJYXqShdb
ZJwkOBwfv2lbYZJxIBJTy/iA6zdsoQ==
=ZzaJ
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
- Add support for online resizing of file systems with bigalloc
- Fix a two data corruption bugs involving DAX, as well as a corruption
bug after a crash during a racing fallocate and delayed allocation.
- Finally, a number of cleanups and optimizations.
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: improve smp scalability for inode generation
ext4: add support for online resizing with bigalloc
ext4: mention noload when recovering on read-only device
Documentation: fix little inconsistencies
ext4: convert timers to use timer_setup()
jbd2: convert timers to use timer_setup()
ext4: remove duplicate extended attributes defs
ext4: add ext4_should_use_dax()
ext4: add sanity check for encryption + DAX
ext4: prevent data corruption with journaling + DAX
ext4: prevent data corruption with inline data + DAX
ext4: fix interaction between i_size, fallocate, and delalloc after a crash
ext4: retry allocations conservatively
ext4: Switch to iomap for SEEK_HOLE / SEEK_DATA
ext4: Add iomap support for inline data
iomap: Add IOMAP_F_DATA_INLINE flag
iomap: Switch from blkno to disk offset
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAloI8AUACgkQ8vlZVpUN
gaMdjgf8CCW7UhPjoZYwF8sUNtAaX9+JZT1maOcXUhpJ3vRQiRn+AzRH6yBYMm79
+NZBwVlk4dlEe55Wh4yFIStMAstqzCrke4C9CSbExjgHNsJdU4znyYuLRMbLfyO0
6c4NObiAIKJdW1/te1aN90keGC6min8pBZot+FqZsRr+Kq2+IOtM43JAv7efOLev
v3LCjUf9JKxatoB8tgw4AJRa1p18p7D2APWTG05VlFq63TjhVIYNvvwcQlizLwGY
cuEq3X59FbFdX06fJnucujU3WP3ES4/3rhufBK4NNaec5e5dbnH2KlAx7J5SyMIZ
0qUFB/dmXDSb3gsfScSGo1F71Ad0CA==
=asAm
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt
Pull fscrypt updates from Ted Ts'o:
"Lots of cleanups, mostly courtesy by Eric Biggers"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: lock mutex before checking for bounce page pool
fscrypt: add a documentation file for filesystem-level encryption
ext4: switch to fscrypt_prepare_setattr()
ext4: switch to fscrypt_prepare_lookup()
ext4: switch to fscrypt_prepare_rename()
ext4: switch to fscrypt_prepare_link()
ext4: switch to fscrypt_file_open()
fscrypt: new helper function - fscrypt_prepare_setattr()
fscrypt: new helper function - fscrypt_prepare_lookup()
fscrypt: new helper function - fscrypt_prepare_rename()
fscrypt: new helper function - fscrypt_prepare_link()
fscrypt: new helper function - fscrypt_file_open()
fscrypt: new helper function - fscrypt_require_key()
fscrypt: remove unneeded empty fscrypt_operations structs
fscrypt: remove ->is_encrypted()
fscrypt: switch from ->is_encrypted() to IS_ENCRYPTED()
fs, fscrypt: add an S_ENCRYPTED inode flag
fscrypt: clean up include file mess
->s_next_generation is protected by s_next_gen_lock but its usage
pattern is very primitive. We don't actually need sequentially
increasing new generation numbers, so let's use prandom_u32() instead.
Reported-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the case where a filesystem has been configured without encryption
support, there is no longer any need to initialize ->s_cop at all, since
none of the methods are ever called.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that all callers of fscrypt_operations.is_encrypted() have been
switched to IS_ENCRYPTED(), remove ->is_encrypted().
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Introduce a flag S_ENCRYPTED which can be set in ->i_flags to indicate
that the inode is encrypted using the fscrypt (fs/crypto/) mechanism.
Checking this flag will give the same information that
inode->i_sb->s_cop->is_encrypted(inode) currently does, but will be more
efficient. This will be useful for adding higher-level helper functions
for filesystems to use. For example we'll be able to replace this:
if (ext4_encrypted_inode(inode)) {
ret = fscrypt_get_encryption_info(inode);
if (ret)
return ret;
if (!fscrypt_has_encryption_key(inode))
return -ENOKEY;
}
with this:
ret = fscrypt_require_key(inode);
if (ret)
return ret;
... since we'll be able to retain the fast path for unencrypted files as
a single flag check, using an inline function. This wasn't possible
before because we'd have had to frequently call through the
->i_sb->s_cop->is_encrypted function pointer, even when the encryption
support was disabled or not being used.
Note: we don't define S_ENCRYPTED to 0 if CONFIG_FS_ENCRYPTION is
disabled because we want to continue to return an error if an encrypted
file is accessed without encryption support, rather than pretending that
it is unencrypted.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[AV: in addition to the fix in previous commit]
Signed-off-by: Matthew Garrett <mjg59@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Help the user to find the appropriate mount option to continue mounting
the file system on a read-only device if the journal requires recovery.
Signed-off-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: linux-ext4@vger.kernel.org
We prevent DAX from being used on inodes which are using ext4's built in
encryption via a check in ext4_set_inode_flags(). We do have what appears
to be an unsafe transition of S_DAX in ext4_set_context(), though, where
S_DAX can get disabled without us doing a proper writeback + invalidate.
There are also issues with mm-level races when changing the value of S_DAX,
as well as issues with the VM_MIXEDMAP flag:
https://www.spinics.net/lists/linux-xfs/msg09859.html
I actually think we are safe in this case because of the following:
1) You can't encrypt an existing file. Encryption can only be set on an
empty directory, with new inodes in that directory being created with
encryption turned on, so I don't think it's possible to turn encryption on
for a file that has open DAX mmaps or outstanding I/Os.
2) There is no way to turn encryption off on a given file. Once an inode
is encrypted, it stays encrypted for the life of that inode, so we don't
have to worry about the case where we turn encryption off and S_DAX
suddenly turns on.
3) The only way we end up in ext4_set_context() to turn on encryption is
when we are creating a new file in the encrypted directory. This happens
as part of ext4_create() before the inode has been allowed to do any I/O.
Here's the call tree:
ext4_create()
__ext4_new_inode()
ext4_set_inode_flags() // sets S_DAX
fscrypt_inherit_context()
fscrypt_get_encryption_info();
ext4_set_context() // sets EXT4_INODE_ENCRYPT, clears S_DAX
So, I actually think it's safe to transition S_DAX in ext4_set_context()
without any locking, writebacks or invalidations. I've added a
WARN_ON_ONCE() sanity check to make sure that we are notified if we ever
encounter a case where we are encrypting an inode that already has data,
in which case we need to add code to safely transition S_DAX.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
If an inode has inline data it is currently prevented from using DAX by a
check in ext4_set_inode_flags(). When the inode grows inline data via
ext4_create_inline_data() or removes its inline data via
ext4_destroy_inline_data_nolock(), the value of S_DAX can change.
Currently these changes are unsafe because we don't hold off page faults
and I/O, write back dirty radix tree entries and invalidate all mappings.
There are also issues with mm-level races when changing the value of S_DAX,
as well as issues with the VM_MIXEDMAP flag:
https://www.spinics.net/lists/linux-xfs/msg09859.html
The unsafe transition of S_DAX can reliably cause data corruption, as shown
by the following fstest:
https://patchwork.kernel.org/patch/9948381/
Fix this issue by preventing the DAX mount option from being used on
filesystems that were created to support inline data. Inline data is an
option given to mkfs.ext4.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
CC: stable@vger.kernel.org
Pull mount flag updates from Al Viro:
"Another chunk of fmount preparations from dhowells; only trivial
conflicts for that part. It separates MS_... bits (very grotty
mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
only a small subset of MS_... stuff).
This does *not* convert the filesystems to new constants; only the
infrastructure is done here. The next step in that series is where the
conflicts would be; that's the conversion of filesystems. It's purely
mechanical and it's better done after the merge, so if you could run
something like
list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')
sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \
-e 's/\<MS_NOSUID\>/SB_NOSUID/g' \
-e 's/\<MS_NODEV\>/SB_NODEV/g' \
-e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \
-e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \
-e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \
-e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \
-e 's/\<MS_NOATIME\>/SB_NOATIME/g' \
-e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \
-e 's/\<MS_SILENT\>/SB_SILENT/g' \
-e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \
-e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \
-e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \
-e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \
$list
and commit it with something along the lines of 'convert filesystems
away from use of MS_... constants' as commit message, it would save a
quite a bit of headache next cycle"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Differentiate mount flags (MS_*) from internal superblock flags
VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
* Media error handling support in the Block Translation Table (BTT)
driver is reworked to address sleeping-while-atomic locking and
memory-allocation-context conflicts.
* The dax_device lookup overhead for xfs and ext4 is moved out of the
iomap hot-path to a mount-time lookup.
* A new 'ecc_unit_size' sysfs attribute is added to advertise the
read-modify-write boundary property of a persistent memory range.
* Preparatory fix-ups for arm and powerpc pmem support are included
along with other miscellaneous fixes.
-----BEGIN PGP SIGNATURE-----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=5iGY
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm from Dan Williams:
"A rework of media error handling in the BTT driver and other updates.
It has appeared in a few -next releases and collected some late-
breaking build-error and warning fixups as a result.
Summary:
- Media error handling support in the Block Translation Table (BTT)
driver is reworked to address sleeping-while-atomic locking and
memory-allocation-context conflicts.
- The dax_device lookup overhead for xfs and ext4 is moved out of the
iomap hot-path to a mount-time lookup.
- A new 'ecc_unit_size' sysfs attribute is added to advertise the
read-modify-write boundary property of a persistent memory range.
- Preparatory fix-ups for arm and powerpc pmem support are included
along with other miscellaneous fixes"
* tag 'libnvdimm-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (26 commits)
libnvdimm, btt: fix format string warnings
libnvdimm, btt: clean up warning and error messages
ext4: fix null pointer dereference on sbi
libnvdimm, nfit: move the check on nd_reserved2 to the endpoint
dax: fix FS_DAX=n BLOCK=y compilation
libnvdimm: fix integer overflow static analysis warning
libnvdimm, nd_blk: remove mmio_flush_range()
libnvdimm, btt: rework error clearing
libnvdimm: fix potential deadlock while clearing errors
libnvdimm, btt: cache sector_size in arena_info
libnvdimm, btt: ensure that flags were also unchanged during a map_read
libnvdimm, btt: refactor map entry operations with macros
libnvdimm, btt: fix a missed NVDIMM_IO_ATOMIC case in the write path
libnvdimm, nfit: export an 'ecc_unit_size' sysfs attribute
ext4: perform dax_device lookup at mount
ext2: perform dax_device lookup at mount
xfs: perform dax_device lookup at mount
dax: introduce a fs_dax_get_by_bdev() helper
libnvdimm, btt: check memory allocation failure
libnvdimm, label: fix index block size calculation
...
Pull quota scaling updates from Jan Kara:
"This contains changes to make the quota subsystem more scalable.
Reportedly it improves number of files created per second on ext4
filesystem on fast storage by about a factor of 2x"
* 'quota_scaling' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (28 commits)
quota: Add lock annotations to struct members
quota: Reduce contention on dq_data_lock
fs: Provide __inode_get_bytes()
quota: Inline dquot_[re]claim_reserved_space() into callsite
quota: Inline inode_{incr,decr}_space() into callsites
quota: Inline functions into their callsites
ext4: Disable dirty list tracking of dquots when journalling quotas
quota: Allow disabling tracking of dirty dquots in a list
quota: Remove dq_wait_unused from dquot
quota: Move locking into clear_dquot_dirty()
quota: Do not dirty bad dquots
quota: Fix possible corruption of dqi_flags
quota: Propagate ->quota_read errors from v2_read_file_info()
quota: Fix error codes in v2_read_file_info()
quota: Push dqio_sem down to ->read_file_info()
quota: Push dqio_sem down to ->write_file_info()
quota: Push dqio_sem down to ->get_next_id()
quota: Push dqio_sem down to ->release_dqblk()
quota: Remove locking for writing to the old quota format
quota: Do not acquire dqio_sem for dquot overwrites in v2 format
...
In the case of a kzalloc failure when allocating sbi we end up
with a null pointer dereference on sbi when assigning sbi->s_daxdev.
Fix this by moving the assignment of sbi->s_daxdev to after the
null pointer check of sbi.
Detected by CoverityScan CID#1455379 ("Dereference before null check")
Fixes: 5e405595e5 ("ext4: perform dax_device lookup at mount")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The ->iomap_begin() operation is a hot path, so cache the
fs_dax_get_by_host() result at mount time to avoid the incurring the
hash lookup overhead on a per-i/o basis.
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Quota does not get enabled for read-only mounts if filesystem
has quota feature, so that quotas cannot updated during orphan
cleanup, which will lead to quota inconsistency.
This patch turn on quotas during orphan cleanup for this case,
make sure quotas can be updated correctly.
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org # 3.18+
Current ext4 quota should always "usage enabled" if the
quota feautre is enabled. But in ext4_orphan_cleanup(), it
turn quotas off directly (used for the older journaled
quota), so we cannot turn it on again via "quotaon" unless
umount and remount ext4.
Simple reproduce:
mkfs.ext4 -O project,quota /dev/vdb1
mount -o prjquota /dev/vdb1 /mnt
chattr -p 123 /mnt
chattr +P /mnt
touch /mnt/aa /mnt/bb
exec 100<>/mnt/aa
rm -f /mnt/aa
sync
echo c > /proc/sysrq-trigger
#reboot and mount
mount -o prjquota /dev/vdb1 /mnt
#query status
quotaon -Ppv /dev/vdb1
#output
quotaon: Cannot find mountpoint for device /dev/vdb1
quotaon: No correct mountpoint specified.
This patch add check for journaled quotas to avoid incorrect
quotaoff when ext4 has quota feautre.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org # 3.18
dq_data_lock is currently used to protect all modifications of quota
accounting information, consistency of quota accounting on the inode,
and dquot pointers from inode. As a result contention on the lock can be
pretty heavy.
Reduce the contention on the lock by protecting quota accounting
information by a new dquot->dq_dqb_lock and consistency of quota
accounting with inode usage by inode->i_lock.
This change reduces time to create 500000 files on ext4 on ramdisk by 50
different processes in separate directories by 6% when user quota is
turned on. When those 50 processes belong to 50 different users, the
improvement is about 9%.
Signed-off-by: Jan Kara <jack@suse.cz>
When journalling quotas, we writeback all dquots immediately after
changing them as part of current transation. Thus there's no need to
write anything in dquot_writeback_dquots() and so we can avoid updating
list of dirty dquots to reduce dq_list_lock contention.
This change reduces time to create 500000 files on ext4 on ramdisk by 50
different processes in separate directories by 15% when user quota is
turned on.
Signed-off-by: Jan Kara <jack@suse.cz>
Two variables in ext4_inode_info, i_reserved_meta_blocks and
i_allocated_meta_blocks, are unused. Removing them saves a little
memory per in-memory inode and cleans up clutter in several tracepoints.
Adjust tracepoint output from ext4_alloc_da_blocks() for consistency
and fix a typo and whitespace near these changes.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Firstly by applying the following with coccinelle's spatch:
@@ expression SB; @@
-SB->s_flags & MS_RDONLY
+sb_rdonly(SB)
to effect the conversion to sb_rdonly(sb), then by applying:
@@ expression A, SB; @@
(
-(!sb_rdonly(SB)) && A
+!sb_rdonly(SB) && A
|
-A != (sb_rdonly(SB))
+A != sb_rdonly(SB)
|
-A == (sb_rdonly(SB))
+A == sb_rdonly(SB)
|
-!(sb_rdonly(SB))
+!sb_rdonly(SB)
|
-A && (sb_rdonly(SB))
+A && sb_rdonly(SB)
|
-A || (sb_rdonly(SB))
+A || sb_rdonly(SB)
|
-(sb_rdonly(SB)) != A
+sb_rdonly(SB) != A
|
-(sb_rdonly(SB)) == A
+sb_rdonly(SB) == A
|
-(sb_rdonly(SB)) && A
+sb_rdonly(SB) && A
|
-(sb_rdonly(SB)) || A
+sb_rdonly(SB) || A
)
@@ expression A, B, SB; @@
(
-(sb_rdonly(SB)) ? 1 : 0
+sb_rdonly(SB)
|
-(sb_rdonly(SB)) ? A : B
+sb_rdonly(SB) ? A : B
)
to remove left over excess bracketage and finally by applying:
@@ expression A, SB; @@
(
-(A & MS_RDONLY) != sb_rdonly(SB)
+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
|
-(A & MS_RDONLY) == sb_rdonly(SB)
+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
)
to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.
Signed-off-by: David Howells <dhowells@redhat.com>
feature, which allows ext4 directories to support over 2 billion
directory entries (assuming ~64 byte file names; in practice, users
will run into practical performance limits first.) This feature was
originally written by the Lustre team, and credit goes to Artem
Blagodarenko from Seagate for getting this feature upstream.
The second major major feature allows ext4 to support extended
attribute values up to 64k. This feature was also originally from
Lustre, and has been enhanced by Tahsin Erdogan from Google with a
deduplication feature so that if multiple files have the same xattr
value (for example, Windows ACL's stored by Samba), only one copy will
be stored on disk for encoding and caching efficiency.
We also have the usual set of bug fixes, cleanups, and optimizations.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAllhl5AACgkQ8vlZVpUN
gaOiNQf+L23sT9KIQmFwQP38vkBVw67Eo7gBfevmk7oqQLiRppT5mmLzW8EWEDxR
PVaDQXvSZi18wSCAAcCd1ZqeIZk0P6tst0ufnIT60tGlZdUlwSLyrqvV/30axR2g
6kcnv90ZszrQNx5U8q8bMzNrs1KtyPHFCRzavFsBX11WezNSpWnH2in/uxO+t9Jy
F2zlrLUrE2m9AVMH48Dh6LbeaB6pqgr4k3jq1jG4Iqb2h9xgU8OKhs8gL07YS+Qi
5A7s8GIvYQSoZUO9DOOie2f1zhpO0KrhXchyZTJukVQH7TsmFxoSh0vhXnP1Bohu
CNLV6dzetDT0VfmPr1WhVe7lhZeeVw==
=FFkF
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"The first major feature for ext4 this merge window is the largedir
feature, which allows ext4 directories to support over 2 billion
directory entries (assuming ~64 byte file names; in practice, users
will run into practical performance limits first.) This feature was
originally written by the Lustre team, and credit goes to Artem
Blagodarenko from Seagate for getting this feature upstream.
The second major major feature allows ext4 to support extended
attribute values up to 64k. This feature was also originally from
Lustre, and has been enhanced by Tahsin Erdogan from Google with a
deduplication feature so that if multiple files have the same xattr
value (for example, Windows ACL's stored by Samba), only one copy will
be stored on disk for encoding and caching efficiency.
We also have the usual set of bug fixes, cleanups, and optimizations"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (47 commits)
ext4: fix spelling mistake: "prellocated" -> "preallocated"
ext4: fix __ext4_new_inode() journal credits calculation
ext4: skip ext4_init_security() and encryption on ea_inodes
fs: generic_block_bmap(): initialize all of the fields in the temp bh
ext4: change fast symlink test to not rely on i_blocks
ext4: require key for truncate(2) of encrypted file
ext4: don't bother checking for encryption key in ->mmap()
ext4: check return value of kstrtoull correctly in reserved_clusters_store
ext4: fix off-by-one fsmap error on 1k block filesystems
ext4: return EFSBADCRC if a bad checksum error is found in ext4_find_entry()
ext4: return EIO on read error in ext4_find_entry
ext4: forbid encrypting root directory
ext4: send parallel discards on commit completions
ext4: avoid unnecessary stalls in ext4_evict_inode()
ext4: add nombcache mount option
ext4: strong binding of xattr inode references
ext4: eliminate xattr entry e_hash recalculation for removes
ext4: reserve space for xattr entries/names
quota: add get_inode_usage callback to transfer multi-inode charges
ext4: xattr inode deduplication
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAllhktgACgkQ8vlZVpUN
gaOQIQf+KM2s46sxxEl0/hjdBXR4OxTmSS2/0900NPyg7JHKlL8PdYslOyvMiKjo
wEi+YPwwQgbHtxhI1VINfV/q12MZHwvmFOfD9NzjrISwfmfsKj0dBgZDAfBH82sK
12wKgUxA8xJ4P+Xdvnz2PokRcFCsh1YUr5IUQkP3JR2RZOxNFUj42QwPJ2yWzqxO
MsnepMjIHsxvXZi0E7sPjRaoFsh3DDeLmNl8sX6INodC7hxJ1LotYKqJhA4stQpB
ezXY2tabwg3gaOWvWH7THyHhGntbZVDga3iRrKdNLahXN8OBdHktmG75ubiN6tEg
x80pqQLgr41yIQuJVOuyeh5jLYZrww==
=i4r9
-----END PGP SIGNATURE-----
Merge tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt
Pull fscrypt updates from Ted Ts'o:
"Add support for 128-bit AES and some cleanups to fscrypt"
* tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: make ->dummy_context() return bool
fscrypt: add support for AES-128-CBC
fscrypt: inline fscrypt_free_filename()
ea_inode feature allows creating extended attributes that are up to
64k in size. Update __ext4_new_inode() to pick increased credit limits.
To avoid overallocating too many journal credits, update
__ext4_xattr_set_credits() to make a distinction between xattr create
vs update. This helps __ext4_new_inode() because all attributes are
known to be new, so we can save credits that are normally needed to
delete old values.
Also, have fscrypt specify its maximum context size so that we don't
end up allocating credits for 64k size.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
- introduce the new uuid_t/guid_t types that are going to replace
the somewhat confusing uuid_be/uuid_le types and make the terminology
fit the various specs, as well as the userspace libuuid library.
(me, based on a previous version from Amir)
- consolidated generic uuid/guid helper functions lifted from XFS
and libnvdimm (Amir and me)
- conversions to the new types and helpers (Amir, Andy and me)
-----BEGIN PGP SIGNATURE-----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=J/4P
-----END PGP SIGNATURE-----
Merge tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid
Pull uuid subsystem from Christoph Hellwig:
"This is the new uuid subsystem, in which Amir, Andy and I have started
consolidating our uuid/guid helpers and improving the types used for
them. Note that various other subsystems have pulled in this tree, so
I'd like it to go in early.
UUID/GUID summary:
- introduce the new uuid_t/guid_t types that are going to replace the
somewhat confusing uuid_be/uuid_le types and make the terminology
fit the various specs, as well as the userspace libuuid library.
(me, based on a previous version from Amir)
- consolidated generic uuid/guid helper functions lifted from XFS and
libnvdimm (Amir and me)
- conversions to the new types and helpers (Amir, Andy and me)"
* tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid: (34 commits)
ACPI: hns_dsaf_acpi_dsm_guid can be static
mmc: sdhci-pci: make guid intel_dsm_guid static
uuid: Take const on input of uuid_is_null() and guid_is_null()
thermal: int340x_thermal: fix compile after the UUID API switch
thermal: int340x_thermal: Switch to use new generic UUID API
acpi: always include uuid.h
ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()
ACPI / extlog: Switch to use new generic UUID API
ACPI / bus: Switch to use new generic UUID API
ACPI / APEI: Switch to use new generic UUID API
acpi, nfit: Switch to use new generic UUID API
MAINTAINERS: add uuid entry
tmpfs: generate random sb->s_uuid
scsi_debug: switch to uuid_t
nvme: switch to uuid_t
sysctl: switch to use uuid_t
partitions/ldm: switch to use uuid_t
overlayfs: use uuid_t instead of uuid_be
fs: switch ->s_uuid to uuid_t
ima/policy: switch to use uuid_t
...
This makes it consistent with ->is_encrypted(), ->empty_dir(), and
fscrypt_dummy_context_enabled().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently it's possible to encrypt all files and directories on an ext4
filesystem by deleting everything, including lost+found, then setting an
encryption policy on the root directory. However, this is incompatible
with e2fsck because e2fsck expects to find, create, and/or write to
lost+found and does not have access to any encryption keys. Especially
problematic is that if e2fsck can't find lost+found, it will create it
without regard for whether the root directory is encrypted. This is
wrong for obvious reasons, and it causes a later run of e2fsck to
consider the lost+found directory entry to be corrupted.
Encrypting the root directory may also be of limited use because it is
the "all-or-nothing" use case, for which dm-crypt can be used instead.
(By design, encryption policies are inherited and cannot be overridden;
so the root directory having an encryption policy implies that all files
and directories on the filesystem have that same encryption policy.)
In any case, encrypting the root directory is broken currently and must
not be allowed; so start returning an error if userspace requests it.
For now only do this in ext4, because f2fs and ubifs do not appear to
have the lost+found requirement. We could move it into
fscrypt_ioctl_set_policy() later if desired, though.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Now, when we mount ext4 filesystem with '-o discard' option, we have to
issue all the discard commands for the blocks to be deallocated and
wait for the completion of the commands on the commit complete phase.
Because this procedure might involve a lot of sequential combinations of
issuing discard commands and waiting for that, the delay of this
procedure might be too much long, even to 17.0s in our test,
and it results in long commit delay and fsync() performance degradation.
To reduce this kind of delay, instead of adding callback for each
extent and handling all of them in a sequential manner on commit phase,
we instead add a separate list of extents to free to the superblock and
then process this list at once after transaction commits so that
we can issue all the discard commands in a parallel manner like XFS
filesystem.
Finally, we could enhance the discard command handling performance.
The result was such that 17.0s delay of a single commit in the worst
case has been enhanced to 4.8s.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Hobin Woo <hobin.woo@samsung.com>
Tested-by: Kitae Lee <kitae87.lee@samsung.com>
Reviewed-by: Jan Kara <jack@suse.cz>
The main purpose of mb cache is to achieve deduplication in
extended attributes. In use cases where opportunity for deduplication
is unlikely, it only adds overhead.
Add a mount option to explicitly turn off mb cache.
Suggested-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ext4 ea_inode feature allows storing xattr values in external inodes to
be able to store values that are bigger than a block in size. Ext4 also
has deduplication support for these type of inodes. With deduplication,
the actual storage waste is eliminated but the users of such inodes are
still charged full quota for the inodes as if there was no sharing
happening in the background.
This design requires ext4 to manually charge the users because the
inodes are shared.
An implication of this is that, if someone calls chown on a file that
has such references we need to transfer the quota for the file and xattr
inodes. Current dquot_transfer() function implicitly transfers one inode
charge. With ea_inode feature, we would like to transfer multiple inode
charges.
Add get_inode_usage callback which can interrogate the total number of
inodes that were charged for a given inode.
[ Applied fix from Colin King to make sure the 'ret' variable is
initialized on the successful return path. Detected by
CoverityScan, CID#1446616 ("Uninitialized scalar variable") --tytso]
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jan Kara <jack@suse.cz>
Ext4 now supports xattr values that are up to 64k in size (vfs limit).
Large xattr values are stored in external inodes each one holding a
single value. Once written the data blocks of these inodes are immutable.
The real world use cases are expected to have a lot of value duplication
such as inherited acls etc. To reduce data duplication on disk, this patch
implements a deduplicator that allows sharing of xattr inodes.
The deduplication is based on an in-memory hash lookup that is a best
effort sharing scheme. When a xattr inode is read from disk (i.e.
getxattr() call), its crc32c hash is added to a hash table. Before
creating a new xattr inode for a value being set, the hash table is
checked to see if an existing inode holds an identical value. If such an
inode is found, the ref count on that inode is incremented. On value
removal the ref count is decremented and if it reaches zero the inode is
deleted.
The quota charging for such inodes is manually managed. Every reference
holder is charged the full size as if there was no sharing happening.
This is consistent with how xattr blocks are also charged.
[ Fixed up journal credits calculation to handle inline data and the
rare case where an shared xattr block can get freed when two thread
race on breaking the xattr block sharing. --tytso ]
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There will be a second mb_cache instance that tracks ea_inodes. Make
existing names more explicit so that it is clear that they refer to
xattr block cache.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Both ext4_set_acl() and ext4_set_context() need to be made aware of
ea_inode feature when it comes to credits calculation.
Also add a sufficient credits check in ext4_xattr_set_handle() right
after xattr write lock is grabbed. Original credits calculation is done
outside the lock so there is a possiblity that the initially calculated
credits are not sufficient anymore.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For some file systems we still memcpy into it, but in various places this
already allows us to use the proper uuid helpers. More to come..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> (Changes to IMA/EVM)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
ext4_xattr_block_set() calls dquot_alloc_block() to charge for an xattr
block when new references are made. However if dquot_initialize() hasn't
been called on an inode, request for charging is effectively ignored
because ext4_inode_info->i_dquot is not initialized yet.
Add dquot_initialize() to call paths that lead to ext4_xattr_block_set().
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Quota files have special ranking of i_data_sem lock. We inform lockdep
about it when turning on quotas however when turning quotas off, we
don't clear the lockdep subclass from i_data_sem lock and thus when the
inode gets later reused for a normal file or directory, lockdep gets
confused and complains about possible deadlocks. Fix the problem by
resetting lockdep subclass of i_data_sem on quota off.
Cc: stable@vger.kernel.org
Fixes: daf647d2dd
Reported-and-tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull libnvdimm fixes from Dan Williams:
"Incremental fixes and a small feature addition on top of the main
libnvdimm 4.12 pull request:
- Geert noticed that tinyconfig was bloated by BLOCK selecting DAX.
The size regression is fixed by moving all dax helpers into the
dax-core and only specifying "select DAX" for FS_DAX and
dax-capable drivers. He also asked for clarification of the
NR_DEV_DAX config option which, on closer look, does not need to be
a config option at all. Mike also throws in a DEV_DAX_PMEM fixup
for good measure.
- Ben's attention to detail on -stable patch submissions caught a
case where the recent fixes to arch_copy_from_iter_pmem() missed a
condition where we strand dirty data in the cache. This is tagged
for -stable and will also be included in the rework of the pmem api
to a proposed {memcpy,copy_user}_flushcache() interface for 4.13.
- Vishal adds a feature that missed the initial pull due to pending
review feedback. It allows the kernel to clear media errors when
initializing a BTT (atomic sector update driver) instance on a pmem
namespace.
- Ross noticed that the dax_device + dax_operations conversion broke
__dax_zero_page_range(). The nvdimm unit tests fail to check this
path, but xfstests immediately trips over it. No excuse for missing
this before submitting the 4.12 pull request.
These all pass the nvdimm unit tests and an xfstests spot check. The
set has received a build success notification from the kbuild robot"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
filesystem-dax: fix broken __dax_zero_page_range() conversion
libnvdimm, btt: ensure that initializing metadata clears poison
libnvdimm: add an atomic vs process context flag to rw_bytes
x86, pmem: Fix cache flushing for iovec write < 8 bytes
device-dax: kill NR_DEV_DAX
block, dax: move "select DAX" from BLOCK to FS_DAX
device-dax: Tell kbuild DEV_DAX_PMEM depends on DEV_DAX
Merge more updates from Andrew Morton:
- the rest of MM
- various misc things
- procfs updates
- lib/ updates
- checkpatch updates
- kdump/kexec updates
- add kvmalloc helpers, use them
- time helper updates for Y2038 issues. We're almost ready to remove
current_fs_time() but that awaits a btrfs merge.
- add tracepoints to DAX
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits)
drivers/staging/ccree/ssi_hash.c: fix build with gcc-4.4.4
selftests/vm: add a test for virtual address range mapping
dax: add tracepoint to dax_insert_mapping()
dax: add tracepoint to dax_writeback_one()
dax: add tracepoints to dax_writeback_mapping_range()
dax: add tracepoints to dax_load_hole()
dax: add tracepoints to dax_pfn_mkwrite()
dax: add tracepoints to dax_iomap_pte_fault()
mtd: nand: nandsim: convert to memalloc_noreclaim_*()
treewide: convert PF_MEMALLOC manipulations to new helpers
mm: introduce memalloc_noreclaim_{save,restore}
mm: prevent potential recursive reclaim due to clearing PF_MEMALLOC
mm/huge_memory.c: deposit a pgtable for DAX PMD faults when required
mm/huge_memory.c: use zap_deposited_table() more
time: delete CURRENT_TIME_SEC and CURRENT_TIME
gfs2: replace CURRENT_TIME with current_time
apparmorfs: replace CURRENT_TIME with current_time()
lustre: replace CURRENT_TIME macro
fs: ubifs: replace CURRENT_TIME_SEC with current_time
fs: ufs: use ktime_get_real_ts64() for birthtime
...
Patch series "kvmalloc", v5.
There are many open coded kmalloc with vmalloc fallback instances in the
tree. Most of them are not careful enough or simply do not care about
the underlying semantic of the kmalloc/page allocator which means that
a) some vmalloc fallbacks are basically unreachable because the kmalloc
part will keep retrying until it succeeds b) the page allocator can
invoke a really disruptive steps like the OOM killer to move forward
which doesn't sound appropriate when we consider that the vmalloc
fallback is available.
As it can be seen implementing kvmalloc requires quite an intimate
knowledge if the page allocator and the memory reclaim internals which
strongly suggests that a helper should be implemented in the memory
subsystem proper.
Most callers, I could find, have been converted to use the helper
instead. This is patch 6. There are some more relying on __GFP_REPEAT
in the networking stack which I have converted as well and Eric Dumazet
was not opposed [2] to convert them as well.
[1] http://lkml.kernel.org/r/20170130094940.13546-1-mhocko@kernel.org
[2] http://lkml.kernel.org/r/1485273626.16328.301.camel@edumazet-glaptop3.roam.corp.google.com
This patch (of 9):
Using kmalloc with the vmalloc fallback for larger allocations is a
common pattern in the kernel code. Yet we do not have any common helper
for that and so users have invented their own helpers. Some of them are
really creative when doing so. Let's just add kv[mz]alloc and make sure
it is implemented properly. This implementation makes sure to not make
a large memory pressure for > PAGE_SZE requests (__GFP_NORETRY) and also
to not warn about allocation failures. This also rules out the OOM
killer as the vmalloc is a more approapriate fallback than a disruptive
user visible action.
This patch also changes some existing users and removes helpers which
are specific for them. In some cases this is not possible (e.g.
ext4_kvmalloc, libcfs_kvzalloc) because those seems to be broken and
require GFP_NO{FS,IO} context which is not vmalloc compatible in general
(note that the page table allocation is GFP_KERNEL). Those need to be
fixed separately.
While we are at it, document that __vmalloc{_node} about unsupported gfp
mask because there seems to be a lot of confusion out there.
kvmalloc_node will warn about GFP_KERNEL incompatible (which are not
superset) flags to catch new abusers. Existing ones would have to die
slowly.
[sfr@canb.auug.org.au: f2fs fixup]
Link: http://lkml.kernel.org/r/20170320163735.332e64b7@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170306103032.2540-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Andreas Dilger <adilger@dilger.ca> [ext4 part]
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
file systems and for random write workloads into a preallocated file;
bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlkPYB8ACgkQ8vlZVpUN
gaP1HwgApoMQGegtRIbCZKUzKBJ2S6vwIoPAMz62JuwngOyWygJ1T1TliKTitG04
XvijKpUHtEggMO/ZsUOCoyr2LzJlpVvvrJZsavEubO12LKreYMpvNraZF1GACYTb
lIZpdWkpcEz5WnPV/PXW/dEMcSMhnKe8tbmHXMyAouSC6a55F5Wp456KF/plqkHU
zkWTCDbEOtHThzpL8cthUL71ji62I3Op5jn/qOfKCm6/JtUlw5pYjWkRUNqqjSQE
uQqMpqLxI/VjOdEiBPxEF6A+ZudZmoBQKY15ibWCcHUPFOPqk4RdYz6VivRI7zrg
KrrKcdFT29MtKnRfAAoJcc0nJ4e1Iw==
=il74
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
- add GETFSMAP support
- some performance improvements for very large file systems and for
random write workloads into a preallocated file
- bug fixes and cleanups.
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: cleanup write flags handling from jbd2_write_superblock()
ext4: mark superblock writes synchronous for nobarrier mounts
ext4: inherit encryption xattr before other xattrs
ext4: replace BUG_ON with WARN_ONCE in ext4_end_bio()
ext4: avoid unnecessary transaction stalls during writeback
ext4: preload block group descriptors
ext4: make ext4_shutdown() static
ext4: support GETFSMAP ioctls
vfs: add common GETFSMAP ioctl definitions
ext4: evict inline data when writing to memory map
ext4: remove ext4_xattr_check_entry()
ext4: rename ext4_xattr_check_names() to ext4_xattr_check_entries()
ext4: merge ext4_xattr_list() into ext4_listxattr()
ext4: constify static data that is never modified
ext4: trim return value and 'dir' argument from ext4_insert_dentry()
jbd2: fix dbench4 performance regression for 'nobarrier' mounts
jbd2: Fix lockdep splat with generic/270 test
mm: retry writepages() on ENOMEM when doing an data integrity writeback
For configurations that do not enable DAX filesystems or drivers, do not
require the DAX core to be built.
Given that the 'direct_access' method has been removed from
'block_device_operations', we can also go ahead and remove the
block-related dax helper functions from fs/block_dev.c to
drivers/dax/super.c. This keeps dax details out of the block layer and
lets the DAX core be built as a module in the FS_DAX=n case.
Filesystems need to include dax.h to call bdev_dax_supported().
Cc: linux-xfs@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Commit b685d3d65a "block: treat REQ_FUA and REQ_PREFLUSH as
synchronous" removed REQ_SYNC flag from WRITE_FUA implementation.
generic_make_request_checks() however strips REQ_FUA flag from a bio
when the storage doesn't report volatile write cache and thus write
effectively becomes asynchronous which can lead to performance
regressions. This affects superblock writes for ext4. Fix the problem
by marking superblock writes always as synchronous.
Fixes: b685d3d65a
CC: linux-ext4@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull quota, reiserfs, udf and ext2 updates from Jan Kara:
"The branch contains changes to quota code so that it does not modify
persistent flags in inode->i_flags (it was the only place in kernel
doing that) and handle it inside filesystem's quotaon/off handlers
instead.
The branch also contains two UDF cleanups, a couple of reiserfs fixes
and one fix for ext2 quota locking"
* 'generic' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext4: Improve comments in ext4_quota_{on|off}()
udf: use kmap_atomic for memcpy copying
udf: use octal for permissions
quota: Remove dquot_quotactl_ops
reiserfs: Remove i_attrs_to_sd_attrs()
reiserfs: Remove useless setting of i_flags
jfs: Remove jfs_get_inode_flags()
ext2: Remove ext2_get_inode_flags()
ext4: Remove ext4_get_inode_flags()
quota: Stop setting IMMUTABLE and NOATIME flags on quota files
jfs: Set flags on quota files directly
ext2: Set flags on quota files directly
reiserfs: Set flags on quota files directly
ext4: Set flags on quota files directly
reiserfs: Protect dquot_writeback_dquots() by s_umount semaphore
reiserfs: Make cancel_old_flush() reliable
ext2: Call dquot_writeback_dquots() with s_umount held
reiserfs: avoid a -Wmaybe-uninitialized warning
With enabled meta_bg option block group descriptors
reading IO is not sequential and requires optimization.
Signed-off-by: Andrew Perepechko <andrew.perepechko@seagate.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Support the GETFSMAP ioctls so that we can use the xfs free space
management tools to probe ext4 as well. Note that this is a partial
implementation -- we only report fixed-location metadata and free space;
everything else is reported as "unknown".
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Constify static data in ext4 that is never (intentionally) modified so
that it is placed in .rodata and benefits from memory protection.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Improve comments in ext4_quota_{on|off}() to explain that returning
success despite ext4_journal_start() failing is deliberate.
Signed-off-by: Jan Kara <jack@suse.cz>
Currently immutable and noatime flags on quota files are set by quota
code which requires us to copy inode->i_flags to our on disk version of
quota flags in GETFLAGS ioctl and ext4_do_update_inode(). Move to
setting / clearing these on-disk flags directly to save that copying.
Signed-off-by: Jan Kara <jack@suse.cz>
The only use of the ->prepare_context() fscrypt operation was to allow
ext4 to evict inline data from the inode before ->set_context().
However, there is no reason why this cannot be done as simply the first
step in ->set_context(), and in fact it makes more sense to do it that
way because then the policy modes and flags get validated before any
real work is done. Therefore, merge ext4_prepare_context() into
ext4_set_context(), and remove ->prepare_context().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
primarily used for testing, but which can be useful on production
systems when a scratch volume is being destroyed and the data on it
doesn't need to be saved. This found (and we fixed) a number of bugs
with ext4's recovery to corrupted file system --- the bugs increased
the amount of data that could be potentially lost, and in the case of
the inline data feature, could cause the kernel to BUG.
Also included are a number of other bug fixes, including in ext4's
fscrypt, DAX, inline data support.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlirXesACgkQ8vlZVpUN
gaMOzQf8Ct6uPatV+m855oR4dAbZr2+lY4A4C+vHDzBtSMkPRyLX8cuo8XcwfTIm
vPVyDnL6EPyhXPxxfItu+92wAq1m5mVpKo57d0Ft5lw0rHxNtJTgVSRzsQ7VDRjj
5qMHW2K7Bk7EjzTeW3SF8/3+hqpzkAvRtNCntcomk5h08+cWMC8JSnn1kqw+naIn
EcbrC72GZb8JUELogVXC2vU58lp50SSBdr3l005jqKc5BvljMvdJ0Izn/3RVyU7u
q7vtynhe2ScFcHe/UzL1QgmQOy32tJpbS0NHalW47aw3Ynmn4cSX0YhhT9FDjRNQ
VOOfo1m1sAg166x0E+Nn7FeghTSSyA==
=cPIf
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"For this cycle we add support for the shutdown ioctl, which is
primarily used for testing, but which can be useful on production
systems when a scratch volume is being destroyed and the data on it
doesn't need to be saved.
This found (and we fixed) a number of bugs with ext4's recovery to
corrupted file system --- the bugs increased the amount of data that
could be potentially lost, and in the case of the inline data feature,
could cause the kernel to BUG.
Also included are a number of other bug fixes, including in ext4's
fscrypt, DAX, inline data support"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (26 commits)
ext4: rename EXT4_IOC_GOINGDOWN to EXT4_IOC_SHUTDOWN
ext4: fix fencepost in s_first_meta_bg validation
ext4: don't BUG when truncating encrypted inodes on the orphan list
ext4: do not use stripe_width if it is not set
ext4: fix stripe-unaligned allocations
dax: assert that i_rwsem is held exclusive for writes
ext4: fix DAX write locking
ext4: add EXT4_IOC_GOINGDOWN ioctl
ext4: add shutdown bit and check for it
ext4: rename s_resize_flags to s_ext4_flags
ext4: return EROFS if device is r/o and journal replay is needed
ext4: preserve the needs_recovery flag when the journal is aborted
jbd2: don't leak modified metadata buffers on an aborted journal
ext4: fix inline data error paths
ext4: move halfmd4 into hash.c directly
ext4: fix use-after-iput when fscrypt contexts are inconsistent
jbd2: fix use after free in kjournald2()
ext4: fix data corruption in data=journal mode
ext4: trim allocation requests to group size
ext4: replace BUG_ON with WARN_ON in mb_find_extent()
...
Avoid using stripe_width for sbi->s_stripe value if it is not actually
set. It prevents using the stride for sbi->s_stripe.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the file system requires journal recovery, and the device is
read-ony, return EROFS to the mount system call. This allows xfstests
generic/050 to pass.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
If the journal is aborted, the needs_recovery feature flag should not
be removed. Otherwise, it's the journal might not get replayed and
this could lead to more data getting lost.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
In order to test the inode extra isize expansion code, it is useful to
be able to easily create file systems that have inodes with extra
isize values smaller than the current desired value.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There was an unnecessary amount of complexity around requesting the
filesystem-specific key prefix. It was unclear why; perhaps it was
envisioned that different instances of the same filesystem type could
use different key prefixes, or that key prefixes could be binary.
However, neither of those things were implemented or really make sense
at all. So simplify the code by making key_prefix a const char *.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull more vfs updates from Al Viro:
"In this pile:
- autofs-namespace series
- dedupe stuff
- more struct path constification"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
ocfs2: implement the VFS clone_range, copy_range, and dedupe_range features
ocfs2: charge quota for reflinked blocks
ocfs2: fix bad pointer cast
ocfs2: always unlock when completing dio writes
ocfs2: don't eat io errors during _dio_end_io_write
ocfs2: budget for extent tree splits when adding refcount flag
ocfs2: prohibit refcounted swapfiles
ocfs2: add newlines to some error messages
ocfs2: convert inode refcount test to a helper
simple_write_end(): don't zero in short copy into uptodate
exofs: don't mess with simple_write_{begin,end}
9p: saner ->write_end() on failing copy into non-uptodate page
fix gfs2_stuffed_write_end() on short copies
fix ceph_write_end()
nfs_write_end(): fix handling of short copies
vfs: refactor clone/dedupe_file_range common functions
fs: try to clone files first in vfs_copy_file_range
vfs: misc struct path constification
namespace.c: constify struct path passed to a bunch of primitives
quota: constify struct path in quota_on
...
needed for both ext4 and xfs dax changes to use iomap for DAX. It
also includes the fscrypt branch which is needed for ubifs encryption
work as well as ext4 encryption and fscrypt cleanups.
Lots of cleanups and bug fixes, especially making sure ext4 is robust
against maliciously corrupted file systems --- especially maliciously
corrupted xattr blocks and a maliciously corrupted superblock. Also
fix ext4 support for 64k block sizes so it works well on ppcle. Fixed
mbcache so we don't miss some common xattr blocks that can be merged.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlhQQVEACgkQ8vlZVpUN
gaN9TQgAoCD+V4kJjMCFhiV8u6QR3hqD6bOZbggo5wJf4CHglWkmrbAmc3jANOgH
CKsXDRRjxuDjPXf1ukB1i4M7ArLYjkbbzKdsu7lismoJLS+w8uwUKSNdep+LYMjD
alxUcf5DCzLlUmdOdW4yE22L+CwRfqfs8IpBvKmJb7DrAKiwJVA340ys6daBGuu1
63xYx0QIyPzq0xjqLb6TVf88HUI4NiGVXmlm2wcrnYd5966hEZd/SztOZTVCVWOf
Z0Z0fGQ1WJzmaBB9+YV3aBi+BObOx4m2PUprIa531+iEW02E+ot5Xd4vVQFoV/r4
NX3XtoBrT1XlKagy2sJLMBoCavqrKw==
=j4KP
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"This merge request includes the dax-4.0-iomap-pmd branch which is
needed for both ext4 and xfs dax changes to use iomap for DAX. It also
includes the fscrypt branch which is needed for ubifs encryption work
as well as ext4 encryption and fscrypt cleanups.
Lots of cleanups and bug fixes, especially making sure ext4 is robust
against maliciously corrupted file systems --- especially maliciously
corrupted xattr blocks and a maliciously corrupted superblock. Also
fix ext4 support for 64k block sizes so it works well on ppcle. Fixed
mbcache so we don't miss some common xattr blocks that can be merged"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (86 commits)
dax: Fix sleep in atomic contex in grab_mapping_entry()
fscrypt: Rename FS_WRITE_PATH_FL to FS_CTX_HAS_BOUNCE_BUFFER_FL
fscrypt: Delay bounce page pool allocation until needed
fscrypt: Cleanup page locking requirements for fscrypt_{decrypt,encrypt}_page()
fscrypt: Cleanup fscrypt_{decrypt,encrypt}_page()
fscrypt: Never allocate fscrypt_ctx on in-place encryption
fscrypt: Use correct index in decrypt path.
fscrypt: move the policy flags and encryption mode definitions to uapi header
fscrypt: move non-public structures and constants to fscrypt_private.h
fscrypt: unexport fscrypt_initialize()
fscrypt: rename get_crypt_info() to fscrypt_get_crypt_info()
fscrypto: move ioctl processing more fully into common code
fscrypto: remove unneeded Kconfig dependencies
MAINTAINERS: fscrypto: recommend linux-fsdevel for fscrypto patches
ext4: do not perform data journaling when data is encrypted
ext4: return -ENOMEM instead of success
ext4: reject inodes with negative size
ext4: remove another test in ext4_alloc_file_blocks()
Documentation: fix description of ext4's block_validity mount option
ext4: fix checks for data=ordered and journal_async_commit options
...
Pull block layer updates from Jens Axboe:
"This is the main block pull request this series. Contrary to previous
release, I've kept the core and driver changes in the same branch. We
always ended up having dependencies between the two for obvious
reasons, so makes more sense to keep them together. That said, I'll
probably try and keep more topical branches going forward, especially
for cycles that end up being as busy as this one.
The major parts of this pull request is:
- Improved support for O_DIRECT on block devices, with a small
private implementation instead of using the pig that is
fs/direct-io.c. From Christoph.
- Request completion tracking in a scalable fashion. This is utilized
by two components in this pull, the new hybrid polling and the
writeback queue throttling code.
- Improved support for polling with O_DIRECT, adding a hybrid mode
that combines pure polling with an initial sleep. From me.
- Support for automatic throttling of writeback queues on the block
side. This uses feedback from the device completion latencies to
scale the queue on the block side up or down. From me.
- Support from SMR drives in the block layer and for SD. From Hannes
and Shaun.
- Multi-connection support for nbd. From Josef.
- Cleanup of request and bio flags, so we have a clear split between
which are bio (or rq) private, and which ones are shared. From
Christoph.
- A set of patches from Bart, that improve how we handle queue
stopping and starting in blk-mq.
- Support for WRITE_ZEROES from Chaitanya.
- Lightnvm updates from Javier/Matias.
- Supoort for FC for the nvme-over-fabrics code. From James Smart.
- A bunch of fixes from a whole slew of people, too many to name
here"
* 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits)
blk-stat: fix a few cases of missing batch flushing
blk-flush: run the queue when inserting blk-mq flush
elevator: make the rqhash helpers exported
blk-mq: abstract out blk_mq_dispatch_rq_list() helper
blk-mq: add blk_mq_start_stopped_hw_queue()
block: improve handling of the magic discard payload
blk-wbt: don't throttle discard or write zeroes
nbd: use dev_err_ratelimited in io path
nbd: reset the setup task for NBD_CLEAR_SOCK
nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME
nvme-fabrics: Add target support for FC transport
nvme-fabrics: Add host support for FC transport
nvme-fabrics: Add FC transport LLDD api definitions
nvme-fabrics: Add FC transport FC-NVME definitions
nvme-fabrics: Add FC transport error codes to nvme.h
Add type 0x28 NVME type code to scsi fc headers
nvme-fabrics: patch target code in prep for FC transport support
nvme-fabrics: set sqe.command_id in core not transports
parser: add u64 number parser
nvme-rdma: align to generic ib_event logging helper
...
Currently data journalling is incompatible with encryption: enabling both
at the same time has never been supported by design, and would result in
unpredictable behavior. However, users are not precluded from turning on
both features simultaneously. This change programmatically replaces data
journaling for encrypted regular files with ordered data journaling mode.
Background:
Journaling encrypted data has not been supported because it operates on
buffer heads of the page in the page cache. Namely, when the commit
happens, which could be up to five seconds after caching, the commit
thread uses the buffer heads attached to the page to copy the contents of
the page to the journal. With encryption, it would have been required to
keep the bounce buffer with ciphertext for up to the aforementioned five
seconds, since the page cache can only hold plaintext and could not be
used for journaling. Alternatively, it would be required to setup the
journal to initiate a callback at the commit time to perform deferred
encryption - in this case, not only would the data have to be written
twice, but it would also have to be encrypted twice. This level of
complexity was not justified for a mode that in practice is very rarely
used because of the overhead from the data journalling.
Solution:
If data=journaled has been set as a mount option for a filesystem, or if
journaling is enabled on a regular file, do not perform journaling if the
file is also encrypted, instead fall back to the data=ordered mode for the
file.
Rationale:
The intent is to allow seamless and proper filesystem operation when
journaling and encryption have both been enabled, and have these two
conflicting features gracefully resolved by the filesystem.
Fixes: 4461471107
Signed-off-by: Sergey Karamov <skaramov@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Combination of data=ordered mode and journal_async_commit mount option
is invalid. However the check in parse_options() fails to detect the
case where we simply end up defaulting to data=ordered mode and we
detect the problem only on remount which triggers hard to understand
failure to remount the filesystem.
Fix the checking of mount options to take into account also the default
mode by moving the check somewhat later in the mount sequence.
Reported-by: Wolfgang Walter <linux@stwm.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ralf Spenneberg reported that he hit a kernel crash when mounting a
modified ext4 image. And it turns out that kernel crashed when
calculating fs overhead (ext4_calculate_overhead()), this is because
the image has very large s_first_meta_bg (debug code shows it's
842150400), and ext4 overruns the memory in count_overhead() when
setting bitmap buffer, which is PAGE_SIZE.
ext4_calculate_overhead():
buf = get_zeroed_page(GFP_NOFS); <=== PAGE_SIZE buffer
blks = count_overhead(sb, i, buf);
count_overhead():
for (j = ext4_bg_num_gdb(sb, grp); j > 0; j--) { <=== j = 842150400
ext4_set_bit(EXT4_B2C(sbi, s++), buf); <=== buffer overrun
count++;
}
This can be reproduced easily for me by this script:
#!/bin/bash
rm -f fs.img
mkdir -p /mnt/ext4
fallocate -l 16M fs.img
mke2fs -t ext4 -O bigalloc,meta_bg,^resize_inode -F fs.img
debugfs -w -R "ssv first_meta_bg 842150400" fs.img
mount -o loop fs.img /mnt/ext4
Fix it by validating s_first_meta_bg first at mount time, and
refusing to mount if its value exceeds the largest possible meta_bg
number.
Reported-by: Ralf Spenneberg <ralf@os-t.de>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
In ext4_put_super, we call brelse on the buffer head containing
the ext4 superblock, but then try to use it when we stop the
mmp thread, because when the thread shuts down it does:
write_mmp_block
ext4_mmp_csum_set
ext4_has_metadata_csum
WARN_ON_ONCE(ext4_has_feature_metadata_csum(sb)...)
which reaches into sb->s_fs_info->s_es->s_feature_ro_compat,
which lives in the superblock buffer s_sbh which we just released.
Fix this by moving the brelse down to a point where we are no
longer using it.
Reported-by: Wang Shu <shuwang@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
On a lockdep-enabled kernel, xfstests generic/027 fails due to a lockdep
warning when run on ext4 mounted with -o test_dummy_encryption:
xfs_io/4594 is trying to acquire lock:
(jbd2_handle
){++++.+}, at:
[<ffffffff813096ef>] jbd2_log_wait_commit+0x5/0x11b
but task is already holding lock:
(jbd2_handle
){++++.+}, at:
[<ffffffff813000de>] start_this_handle+0x354/0x3d8
The abbreviated call stack is:
[<ffffffff813096ef>] ? jbd2_log_wait_commit+0x5/0x11b
[<ffffffff8130972a>] jbd2_log_wait_commit+0x40/0x11b
[<ffffffff813096ef>] ? jbd2_log_wait_commit+0x5/0x11b
[<ffffffff8130987b>] ? __jbd2_journal_force_commit+0x76/0xa6
[<ffffffff81309896>] __jbd2_journal_force_commit+0x91/0xa6
[<ffffffff813098b9>] jbd2_journal_force_commit_nested+0xe/0x18
[<ffffffff812a6049>] ext4_should_retry_alloc+0x72/0x79
[<ffffffff812f0c1f>] ext4_xattr_set+0xef/0x11f
[<ffffffff812cc35b>] ext4_set_context+0x3a/0x16b
[<ffffffff81258123>] fscrypt_inherit_context+0xe3/0x103
[<ffffffff812ab611>] __ext4_new_inode+0x12dc/0x153a
[<ffffffff812bd371>] ext4_create+0xb7/0x161
When a file is created in an encrypted directory, ext4_set_context() is
called to set an encryption context on the new file. This calls
ext4_xattr_set(), which contains a retry loop where the journal is
forced to commit if an ENOSPC error is encountered.
If the task actually were to wait for the journal to commit in this
case, then it would deadlock because a handle remains open from
__ext4_new_inode(), so the running transaction can't be committed yet.
Fortunately, __jbd2_journal_force_commit() avoids the deadlock by not
allowing the running transaction to be committed while the current task
has it open. However, the above lockdep warning is still triggered.
This was a false positive which was introduced by: 1eaa566d36: jbd2:
track more dependencies on transaction commit
Fix the problem by passing the handle through the 'fs_data' argument to
ext4_set_context(), then using ext4_xattr_set_handle() instead of
ext4_xattr_set(). And in the case where no journal handle is specified
and ext4_set_context() has to open one, add an ENOSPC retry loop since
in that case it is the outermost transaction.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Currently we have S_DAX set inode->i_flags for a regular file whenever
ext4 is mounted with dax mount option. However in some cases we cannot
really do DAX - e.g. when inode is marked to use data journalling, when
inode data is being encrypted, or when inode is stored inline. Make sure
S_DAX flag is appropriately set/cleared in these cases.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The commit "ext4: sanity check the block and cluster size at mount
time" should prevent any problems, but in case the superblock is
modified while the file system is mounted, add an extra safety check
to make sure we won't overrun the allocated buffer.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Centralize the checks for inodes_per_block and be more strict to make
sure the inodes_per_block_group can't end up being zero.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org
Fix a large number of problems with how we handle mount options in the
superblock. For one, if the string in the superblock is long enough
that it is not null terminated, we could run off the end of the string
and try to interpret superblocks fields as characters. It's unlikely
this will cause a security problem, but it could result in an invalid
parse. Also, parse_options is destructive to the string, so in some
cases if there is a comma-separated string, it would be modified in
the superblock. (Fortunately it only happens on file systems with a
1k block size.)
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
CURRENT_TIME_SEC and CURRENT_TIME are not y2038 safe.
current_time() will be transitioned to be y2038 safe
along with vfs.
current_time() returns timestamps according to the
granularities set in the super_block.
The granularity check in ext4_current_time() to call
current_time() or CURRENT_TIME_SEC is not required.
Use current_time() directly to obtain timestamps
unconditionally, and remove ext4_current_time().
Quota files are assumed to be on the same filesystem.
Hence, use current_time() for these files as well.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
If there is an error reported in mballoc via ext4_grp_locked_error(),
the code is holding a spinlock, so ext4_commit_super() must not try to
lock the buffer head, or else it will trigger a BUG:
BUG: sleeping function called from invalid context at ./include/linux/buffer_head.h:358
in_atomic(): 1, irqs_disabled(): 0, pid: 993, name: mount
CPU: 0 PID: 993 Comm: mount Not tainted 4.9.0-rc1-clouder1 #62
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
ffff880006423548 ffffffff81318c89 ffffffff819ecdd0 0000000000000166
ffff880006423558 ffffffff810810b0 ffff880006423580 ffffffff81081153
ffff880006e5a1a0 ffff88000690e400 0000000000000000 ffff8800064235c0
Call Trace:
[<ffffffff81318c89>] dump_stack+0x67/0x9e
[<ffffffff810810b0>] ___might_sleep+0xf0/0x140
[<ffffffff81081153>] __might_sleep+0x53/0xb0
[<ffffffff8126c1dc>] ext4_commit_super+0x19c/0x290
[<ffffffff8126e61a>] __ext4_grp_locked_error+0x14a/0x230
[<ffffffff81081153>] ? __might_sleep+0x53/0xb0
[<ffffffff812822be>] ext4_mb_generate_buddy+0x1de/0x320
Since ext4_grp_locked_error() calls ext4_commit_super with sync == 0
(and it is the only caller which does so), avoid locking and unlocking
the buffer in this case.
This can result in races with ext4_commit_super() if there are other
problems (which is what commit 4743f83990 was trying to address),
but a Warning is better than BUG.
Fixes: 4743f83990
Cc: stable@vger.kernel.org # 4.9
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
This allows us to properly propagate errors back up to
ext4_truncate()'s callers. This also means we no longer have to
silently ignore some errors (e.g., when trying to add the inode to the
orphan inode list).
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags
directly. Where applicable this also drops usage of the
bio_set_op_attrs wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Recent commit require line continuing printks to use PR_CONT.
Update super.c to use KERN_CONT and use vsprintf extension %pV to
avoid a printk/vprintk/printk("\n") sequence as well.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
When a file system contains an internal journal that has not been
loaded, use the journal inode's i_size field to determine its
contribution to the file system's overhead. (The journal's j_maxlen
field is normally used to determine its size, but it's unavailable when
the journal has not been loaded.)
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out the code used in ext4_get_journal() to read a valid journal
inode from storage, enabling its reuse in other functions.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4lazyinit is a global thread. This thread performs itable
initalization under li_list_mtx mutex.
It basically does the following:
ext4_lazyinit_thread
->mutex_lock(&eli->li_list_mtx);
->ext4_run_li_request(elr)
->ext4_init_inode_table-> Do a lot of IO if the list is large
And when new mount/umount arrive they have to block on ->li_list_mtx
because lazy_thread holds it during full walk procedure.
ext4_fill_super
->ext4_register_li_request
->mutex_lock(&ext4_li_info->li_list_mtx);
->list_add(&elr->lr_request, &ext4_li_info >li_request_list);
In my case mount takes 40minutes on server with 36 * 4Tb HDD.
Common user may face this in case of very slow dev ( /dev/mmcblkXXX)
Even more. If one of filesystems was frozen lazyinit_thread will simply
block on sb_start_write() so other mount/umount will be stuck forever.
This patch changes logic like follows:
- grab ->s_umount read sem before processing new li_request.
After that it is safe to drop li_list_mtx because all callers of
li_remove_request are holding ->s_umount for write.
- li_thread skips frozen SB's
Locking order:
Mh KOrder is asserted by umount path like follows: s_umount ->li_list_mtx so
the only way to to grab ->s_mount inside li_thread is via down_read_trylock
xfstests:ext4/023
#PSBM-49658
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When quota information is stored in quota files, we enable only quota
accounting on mount and enforcement is enabled only in response to
Q_QUOTAON quotactl. To make ext4 behavior consistent with XFS, we add a
possibility to enable quota enforcement on mount by specifying
corresponding quota mount option (usrquota, grpquota, prjquota).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
while moving xattrs to expand the extended inode. Also add some
sanity checks to the block group descriptors to make sure we don't end
up overwriting the superblock.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXw7i2AAoJEPL5WVaVDYGj96gH/A8rNgx7BoqPx3kanVEamblT
tM0X9JcEGmKHN4enRts2b78EWbR0/U0SOP92+fg9SSq2MDJ0/kdaKLWmbUwx8jUi
B7HMEqCprlCdigK7wwt3xF+6edyZRhtzlWy3bhxJ40f0KT5CuriSQbxogr931uKl
hUKW2h5JtUqHtINzTt4oWjVm8xwrScxuYHYAcpw0G42ZzfO6xQOzQdowcx4m3cE9
PrtTbU5MwW8/wgsdLiClScQq30MK/GCbHh5heyRt1BcNo9+MDsZDOgdavh9StfnW
Bl1N6zwRtRBJNcpKWfTfwU4NTIvStCTyA8BJgKgE95YIHDsstJVl4MO7ot25qbM=
=pXe+
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix bugs that could cause kernel deadlocks or file system corruption
while moving xattrs to expand the extended inode.
Also add some sanity checks to the block group descriptors to make
sure we don't end up overwriting the superblock"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: avoid deadlock when expanding inode size
ext4: properly align shifted xattrs when expanding inodes
ext4: fix xattr shifting when expanding inodes part 2
ext4: fix xattr shifting when expanding inodes
ext4: validate that metadata blocks do not overlap superblock
ext4: reserve xattr index for the Hurd
A number of fuzzing failures seem to be caused by allocation bitmaps
or other metadata blocks being pointed at the superblock.
This can cause kernel BUG or WARNings once the superblock is
overwritten, so validate the group descriptor blocks to make sure this
doesn't happen.
Cc: stable@vger.kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
encryption code and switching things over to using the copies in
fs/crypto. I've updated the MAINTAINERS file to add an entry for
fs/crypto listing Jaeguk Kim and myself as the maintainers.
There are also a number of bug fixes, most notably for some problems
found by American Fuzzy Lop (AFL) courtesy of Vegard Nossum. Also
fixed is a writeback deadlock detected by generic/130, and some
potential races in the metadata checksum code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXlbP9AAoJEPL5WVaVDYGjGxgIAJ9YIqme//yix63oHYLhDNea
lY/TLqZrb9/TdDRvGyZa3jYaKaIejL53eEQS9nhEB/JI0sEiDpHmOrDOxdj8Hlsw
fm7nJyh1u4vFKPyklCbIvLAje1vl8X/6OvqQiwh45gIxbbsFftaBWtccW+UtEkIP
Fx65Vk7RehJ/sNrM0cRrwB79YAmDS8P6BPyzdMRk+vO/uFqyq7Auc+pkd+bTlw/m
TDAEIunlk0Ovjx75ru1zaemL1JJx5ffehrJmGCcSUPHVbMObOEKIrlV50gAAKVhO
qbZAri3mhDvyspSLuS/73L9skeCiWFLhvojCBGu4t2aa3JJolmItO7IpKi4HdRU=
=bxGK
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"The major change this cycle is deleting ext4's copy of the file system
encryption code and switching things over to using the copies in
fs/crypto. I've updated the MAINTAINERS file to add an entry for
fs/crypto listing Jaeguk Kim and myself as the maintainers.
There are also a number of bug fixes, most notably for some problems
found by American Fuzzy Lop (AFL) courtesy of Vegard Nossum. Also
fixed is a writeback deadlock detected by generic/130, and some
potential races in the metadata checksum code"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits)
ext4: verify extent header depth
ext4: short-cut orphan cleanup on error
ext4: fix reference counting bug on block allocation error
MAINTAINRES: fs-crypto maintainers update
ext4 crypto: migrate into vfs's crypto engine
ext2: fix filesystem deadlock while reading corrupted xattr block
ext4: fix project quota accounting without quota limits enabled
ext4: validate s_reserved_gdt_blocks on mount
ext4: remove unused page_idx
ext4: don't call ext4_should_journal_data() on the journal inode
ext4: Fix WARN_ON_ONCE in ext4_commit_super()
ext4: fix deadlock during page writeback
ext4: correct error value of function verifying dx checksum
ext4: avoid modifying checksum fields directly during checksum verification
ext4: check for extents that wrap around
jbd2: make journal y2038 safe
jbd2: track more dependencies on transaction commit
jbd2: move lockdep tracking to journal_s
jbd2: move lockdep instrumentation for jbd2 handles
ext4: respect the nobarrier mount option in nojournal mode
...
If we encounter a filesystem error during orphan cleanup, we should stop.
Otherwise, we may end up in an infinite loop where the same inode is
processed again and again.
EXT4-fs (loop0): warning: checktime reached, running e2fsck is recommended
EXT4-fs error (device loop0): ext4_mb_generate_buddy:758: group 2, block bitmap and bg descriptor inconsistent: 6117 vs 0 free clusters
Aborting journal on device loop0-8.
EXT4-fs (loop0): Remounting filesystem read-only
EXT4-fs error (device loop0) in ext4_free_blocks:4895: Journal has aborted
EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted
EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted
EXT4-fs error (device loop0) in ext4_ext_remove_space:3068: IO failure
EXT4-fs error (device loop0) in ext4_ext_truncate:4667: Journal has aborted
EXT4-fs error (device loop0) in ext4_orphan_del:2927: Journal has aborted
EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted
EXT4-fs (loop0): Inode 16 (00000000618192a0): orphan list check failed!
[...]
EXT4-fs (loop0): Inode 16 (0000000061819748): orphan list check failed!
[...]
EXT4-fs (loop0): Inode 16 (0000000061819bf0): orphan list check failed!
[...]
See-also: c9eb13a910 ("ext4: fix hang when processing corrupted orphaned inode list")
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
This patch removes the most parts of internal crypto codes.
And then, it modifies and adds some ext4-specific crypt codes to use the generic
facility.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If s_reserved_gdt_blocks is extremely large, it's possible for
ext4_init_block_bitmap(), which is called when ext4 sets up an
uninitialized block bitmap, to corrupt random kernel memory. Add the
same checks which e2fsck has --- it must never be larger than
blocksize / sizeof(__u32) --- and then add a backup check in
ext4_init_block_bitmap() in case the superblock gets modified after
the file system is mounted.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
If there are racing calls to ext4_commit_super() it's possible for
another writeback of the superblock to result in the buffer being
marked with an error after we check if the buffer is marked as having
a write error and the buffer up-to-date flag is set again. If that
happens mark_buffer_dirty() can end up throwing a WARN_ON_ONCE.
Fix this by moving this check to write before we call
write_buffer_dirty(), and keeping the buffer locked during this whole
sequence.
Signed-off-by: Pranay Kr. Srivastava <pranjas@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We temporally change checksum fields in buffers of some types of
metadata into '0' for verifying the checksum values. By doing this
without locking the buffer, some metadata's checksums, which are
being committed or written back to the storage, could be damaged.
In our test, several metadata blocks were found with damaged metadata
checksum value during recovery process. When we only verify the
checksum value, we have to avoid modifying checksum fields directly.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Youngjin Gil <youngjin.gil@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
This has ll_rw_block users pass in the operation and flags separately,
so ll_rw_block can setup the bio op and bi_rw flags on the bio that
is submitted.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When a partition is not aligned by 4KB, mount -o dax succeeds,
but any read/write access to the filesystem fails, except for
metadata update.
Call bdev_dax_supported() to perform proper precondition checks
which includes this partition alignment check.
Reported-by: Micah Parrish <micah.parrish@hpe.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Boaz Harrosh <boaz@plexistor.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
In ext4, there is a race condition between changing inode journal mode
and ext4_writepages(). While ext4_writepages() is executed on a
non-journalled mode inode, the inode's journal mode could be enabled
by ioctl() and then, some pages dirtied after switching the journal
mode will be still exposed to ext4_writepages() in non-journaled mode.
To resolve this problem, we use fs-wide per-cpu rw semaphore by Jan
Kara's suggestion because we don't want to waste ext4_inode_info's
space for this extra rare case.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
(badly behaved) dentry code in various file systems. These have been
reviewed by Al and the respective file system mtinainers and are going
through the ext4 tree for convenience.
This also has a few ext4 encryption bug fixes that were discovered in
Android testing (yes, we will need to get these sync'ed up with the
fs/crypto code; I'll take care of that). It also has some bug fixes
and a change to ignore the legacy quota options to allow for xfstests
regression testing of ext4's internal quota feature and to be more
consistent with how xfs handles this case.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXBn4aAAoJEPL5WVaVDYGjHWgH/2wXnlQnC2ndJhblBWtPzprz
OQW4dawdnhxqbTEGUqWe942tZivSb/liu/lF+urCGbWsbgz9jNOCmEAg7JPwlccY
mjzwDvtVq5U4d2rP+JDWXLy/Gi8XgUclhbQDWFVIIIea6fS7IuFWqoVBR+HPMhra
9tEygpiy5lNtJA/hqq3/z9x0AywAjwrYR491CuWreo2Uu1aeKg0YZsiDsuAcGioN
Waa2TgbC/ZZyJuJcPBP8If+VOFAa0ea3F+C/o7Tb9bOqwuz0qSTcaMRgt6eQ2KUt
P4b9Ecp1XLjJTC7IYOknUOScY3lCyREx/Xya9oGZfFNTSHzbOlLBoplCr3aUpYQ=
=/HHR
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"These changes contains a fix for overlayfs interacting with some
(badly behaved) dentry code in various file systems. These have been
reviewed by Al and the respective file system mtinainers and are going
through the ext4 tree for convenience.
This also has a few ext4 encryption bug fixes that were discovered in
Android testing (yes, we will need to get these sync'ed up with the
fs/crypto code; I'll take care of that). It also has some bug fixes
and a change to ignore the legacy quota options to allow for xfstests
regression testing of ext4's internal quota feature and to be more
consistent with how xfs handles this case"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: ignore quota mount options if the quota feature is enabled
ext4 crypto: fix some error handling
ext4: avoid calling dquot_get_next_id() if quota is not enabled
ext4: retry block allocation for failed DIO and DAX writes
ext4: add lockdep annotations for i_data_sem
ext4: allow readdir()'s of large empty directories to be interrupted
btrfs: fix crash/invalid memory access on fsync when using overlayfs
ext4 crypto: use dget_parent() in ext4_d_revalidate()
ext4: use file_dentry()
ext4: use dget_parent() in ext4_file_open()
nfs: use file_dentry()
fs: add file_dentry()
ext4 crypto: don't let data integrity writebacks fail with ENOMEM
ext4: check if in-inode xattr is corrupted in ext4_expand_extra_isize_ea()
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previously, ext4 would fail the mount if the file system had the quota
feature enabled and quota mount options (used for the older quota
setups) were present. This broke xfstests, since xfs silently ignores
the usrquote and grpquota mount options if they are specified. This
commit changes things so that we are consistent with xfs; having the
mount options specified is harmless, so no sense break users by
forbidding them.
Cc: stable@vger.kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This should be fixed in the quota layer so we can test with the quota
mutex held, but for now, we need this to avoid tests from crashing the
kernel aborting the regression test suite.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
With the internal Quota feature, mke2fs creates empty quota inodes and
quota usage tracking is enabled as soon as the file system is mounted.
Since quotacheck is no longer preallocating all of the blocks in the
quota inode that are likely needed to be written to, we are now seeing
a lockdep false positive caused by needing to allocate a quota block
from inside ext4_map_blocks(), while holding i_data_sem for a data
inode. This results in this complaint:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ei->i_data_sem);
lock(&s->s_dquot.dqio_mutex);
lock(&ei->i_data_sem);
lock(&s->s_dquot.dqio_mutex);
Google-Bug-Id: 27907753
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Pull UDF and quota updates from Jan Kara:
"This contains a rewrite of UDF handling of filename encoding to fix
remaining overflow issues from Andrew Gabbasov and quota changes to
support new Q_[X]GETNEXTQUOTA quotactl for VFS quota formats"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Fix possible GPF due to uninitialised pointers
ext4: Make Q_GETNEXTQUOTA work for quota in hidden inodes
quota: Forbid Q_GETQUOTA and Q_GETNEXTQUOTA for frozen filesystem
quota: Fix possible races during quota loading
ocfs2: Implement get_next_id()
quota_v2: Implement get_next_id() for V2 quota format
quota: Add support for ->get_nextdqblk() for VFS quota
udf: Merge linux specific translation into CS0 conversion function
udf: Remove struct ustr as non-needed intermediate storage
udf: Use separate buffer for copying split names
udf: Adjust UDF_NAME_LEN to better reflect actual restrictions
udf: Join functions for UTF8 and NLS conversions
udf: Parameterize output length in udf_put_filename
quota: Allow Q_GETQUOTA for frozen filesystem
quota: Fixup comments about return value of Q_[X]GETNEXTQUOTA
If data_err=abort option is specified for an ext3/ext4 mount,
/proc/mounts does show it as "(null)". This is caused by token2str()
returning NULL for Opt_data_err_abort (due to its pattern containing
'=').
Signed-off-by: Ales Novak <alnovak@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we've used hashed aio_mutex to serialize unaligned AIO DIO.
However the code cleanups that happened after 2011 when the lock was
introduced made aio_mutex acquired at almost the same places where we
already have exclusion using i_mutex. So just use i_mutex for the
exclusion of unaligned AIO DIO.
The change moves waiting for pending unwritten extent conversion under
i_mutex. That makes special handling of O_APPEND writes unnecessary and
also avoids possible livelocking of unaligned AIO DIO with aligned one
(nothing was preventing contiguous stream of aligned AIO DIOs to let
unaligned AIO DIO wait forever).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This variable, introduced in commit 9c191f70, is unnecessary: it is set
once the module has been initialized correctly, and ext4_fill_super
cannot run unless the module has been initialized correctly.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The conversion is generally straightforward. The only tricky part is
that xattr block corresponding to found mbcache entry can get freed
before we get buffer lock for that block. So we have to check whether
the entry is still valid after getting buffer lock.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We forgot to set .get_nextdqblk operation in quotactl_ops structure used
by ext4 when quota is using hidden inode thus the operation was not
really supported. Fix the omission.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Jan Kara <jack@suse.cz>
Add infrastructure for supporting get_nextdqblk() callback for VFS
quotas. Translate the operation into a callback to appropriate
filesystem and consequently to quota format callback.
Signed-off-by: Jan Kara <jack@suse.cz>
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
encryption fixes from me, and Li Xi's Project Quota commits.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJWnwkiAAoJEPL5WVaVDYGjyAAH/1dj1nNL9h+d12V3zXbvoPkg
5RFw/2QfMZ+GE3Lln9gxTBDSyo/9m8hUK8eg0WpIRtGX9NbKcyrWEGJa2XF++43k
tVpKGyN6cqkwPu4M6EPIK9yRvuALGB5PJE/u0q1lu9VoIAgtin3F/bAQK/iHnrUg
M3+lVDtKcmbhqCdocaLLZD6Q4xlQI3wJne99pYt+Dtx95aOQY9v9SV030i7sOnEt
R5JrhmfkgNqVTB8Zz0IxOp5LQlOkuyvtnZ44yYgJH8ckCUnDQI2hbksSqcMamJ1Y
QJWBzRhVXU9gs1nCRy/Xh48mSk+nvZW9aglk+Syzbzg5C63SgwYcqvbCBqJJEdc=
=HjkT
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Some locking and page fault bug fixes from Jan Kara, some ext4
encryption fixes from me, and Li Xi's Project Quota commits"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fs: clean up the flags definition in uapi/linux/fs.h
ext4: add FS_IOC_FSSETXATTR/FS_IOC_FSGETXATTR interface support
ext4: add project quota support
ext4: adds project ID support
ext4 crypto: simplify interfaces to directory entry insert functions
ext4 crypto: add missing locking for keyring_key access
ext4: use pre-zeroed blocks for DAX page faults
ext4: implement allocation of pre-zeroed blocks
ext4: provide ext4_issue_zeroout()
ext4: get rid of EXT4_GET_BLOCKS_NO_LOCK flag
ext4: document lock ordering
ext4: fix races of writeback with punch hole and zero range
ext4: fix races between buffered IO and collapse / insert range
ext4: move unlocked dio protection from ext4_alloc_file_blocks()
ext4: fix races between page faults and hole punching
Mark those kmem allocations that are known to be easily triggered from
userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to
memcg. For the list, see below:
- threadinfo
- task_struct
- task_delay_info
- pid
- cred
- mm_struct
- vm_area_struct and vm_region (nommu)
- anon_vma and anon_vma_chain
- signal_struct
- sighand_struct
- fs_struct
- files_struct
- fdtable and fdtable->full_fds_bits
- dentry and external_name
- inode for all filesystems. This is the most tedious part, because
most filesystems overwrite the alloc_inode method.
The list is far from complete, so feel free to add more objects.
Nevertheless, it should be close to "account everything" approach and
keep most workloads within bounds. Malevolent users will be able to
breach the limit, but this was possible even with the former "account
everything" approach (simply because it did not account everything in
fact).
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds mount options for enabling/disabling project quota
accounting and enforcement. A new specific inode is also used for
project quota accounting.
[ Includes fix from Dan Carpenter to crrect error checking from dqget(). ]
Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
We have enough locks that it's probably worth documenting the lock
ordering rules we have in ext4.
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, page faults and hole punching are completely unsynchronized.
This can result in page fault faulting in a page into a range that we
are punching after truncate_pagecache_range() has been called and thus
we can end up with a page mapped to disk blocks that will be shortly
freed. Filesystem corruption will shortly follow. Note that the same
race is avoided for truncate by checking page fault offset against
i_size but there isn't similar mechanism available for punching holes.
Fix the problem by creating new rw semaphore i_mmap_sem in inode and
grab it for writing over truncate, hole punching, and other functions
removing blocks from extent tree and for read over page faults. We
cannot easily use i_data_sem for this since that ranks below transaction
start and we need something ranking above it so that it can be held over
the whole truncate / hole punching operation. Also remove various
workarounds we had in the code to reduce race window when page fault
could have created pages with stale mapping information.
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Similar to XFS warn when mounting DAX while it is still considered under
development. Also, aspects of the DAX implementation, for example
synchronization against multiple faults and faults causing block
allocation, depend on the correct implementation in the filesystem. The
maturity of a given DAX implementation is filesystem specific.
Cc: <stable@vger.kernel.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: linux-ext4@vger.kernel.org
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dave Chinner <david@fromorbit.com>
Acked-by: Jan Kara <jack@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Merge second patch-bomb from Andrew Morton:
- most of the rest of MM
- procfs
- lib/ updates
- printk updates
- bitops infrastructure tweaks
- checkpatch updates
- nilfs2 update
- signals
- various other misc bits: coredump, seqfile, kexec, pidns, zlib, ipc,
dma-debug, dma-mapping, ...
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (102 commits)
ipc,msg: drop dst nil validation in copy_msg
include/linux/zutil.h: fix usage example of zlib_adler32()
panic: release stale console lock to always get the logbuf printed out
dma-debug: check nents in dma_sync_sg*
dma-mapping: tidy up dma_parms default handling
pidns: fix set/getpriority and ioprio_set/get in PRIO_USER mode
kexec: use file name as the output message prefix
fs, seqfile: always allow oom killer
seq_file: reuse string_escape_str()
fs/seq_file: use seq_* helpers in seq_hex_dump()
coredump: change zap_threads() and zap_process() to use for_each_thread()
coredump: ensure all coredumping tasks have SIGNAL_GROUP_COREDUMP
signal: remove jffs2_garbage_collect_thread()->allow_signal(SIGCONT)
signal: introduce kernel_signal_stop() to fix jffs2_garbage_collect_thread()
signal: turn dequeue_signal_lock() into kernel_dequeue_signal()
signals: kill block_all_signals() and unblock_all_signals()
nilfs2: fix gcc uninitialized-variable warnings in powerpc build
nilfs2: fix gcc unused-but-set-variable warnings
MAINTAINERS: nilfs2: add header file for tracing
nilfs2: add tracepoints for analyzing reading and writing metadata files
...
__GFP_WAIT has been used to identify atomic context in callers that hold
spinlocks or are in interrupts. They are expected to be high priority and
have access one of two watermarks lower than "min" which can be referred
to as the "atomic reserve". __GFP_HIGH users get access to the first
lower watermark and can be called the "high priority reserve".
Over time, callers had a requirement to not block when fallback options
were available. Some have abused __GFP_WAIT leading to a situation where
an optimisitic allocation with a fallback option can access atomic
reserves.
This patch uses __GFP_ATOMIC to identify callers that are truely atomic,
cannot sleep and have no alternative. High priority users continue to use
__GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and
are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify
callers that want to wake kswapd for background reclaim. __GFP_WAIT is
redefined as a caller that is willing to enter direct reclaim and wake
kswapd for background reclaim.
This patch then converts a number of sites
o __GFP_ATOMIC is used by callers that are high priority and have memory
pools for those requests. GFP_ATOMIC uses this flag.
o Callers that have a limited mempool to guarantee forward progress clear
__GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall
into this category where kswapd will still be woken but atomic reserves
are not used as there is a one-entry mempool to guarantee progress.
o Callers that are checking if they are non-blocking should use the
helper gfpflags_allow_blocking() where possible. This is because
checking for __GFP_WAIT as was done historically now can trigger false
positives. Some exceptions like dm-crypt.c exist where the code intent
is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to
flag manipulations.
o Callers that built their own GFP flags instead of starting with GFP_KERNEL
and friends now also need to specify __GFP_KSWAPD_RECLAIM.
The first key hazard to watch out for is callers that removed __GFP_WAIT
and was depending on access to atomic reserves for inconspicuous reasons.
In some cases it may be appropriate for them to use __GFP_HIGH.
The second key hazard is callers that assembled their own combination of
GFP flags instead of starting with something like GFP_KERNEL. They may
now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless
if it's missed in most cases as other activity will wake kswapd.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is appeared that we can pass journal related mount options and such options
be shown in /proc/mounts
Example:
#mkfs.ext4 -F /dev/vdb
#tune2fs -O ^has_journal /dev/vdb
#mount /dev/vdb /mnt/ -ocommit=20,journal_async_commit
#cat /proc/mounts | grep /mnt
/dev/vdb /mnt ext4 rw,relatime,journal_checksum,journal_async_commit,commit=20,data=ordered 0 0
But options:"journal_checksum,journal_async_commit,commit=20,data=ordered" has
nothing with reality because there is no journal at all.
This patch disallow following options for journalless configurations:
- journal_checksum
- journal_async_commit
- commit=%ld
- data={writeback,ordered,journal}
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Currently MOPT_EXPLICIT treated as EXPLICIT_DELALLOC which may be changed
in future. Let's fix it now.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If a EXT4 filesystem utilizes JBD2 journaling and an error occurs, the
journaling will be aborted first and the error number will be recorded
into JBD2 superblock and, finally, the system will enter into the
panic state in "errors=panic" option. But, in the rare case, this
sequence is little twisted like the below figure and it will happen
that the system enters into panic state, which means the system reset
in mobile environment, before completion of recording an error in the
journal superblock. In this case, e2fsck cannot recognize that the
filesystem failure occurred in the previous run and the corruption
wouldn't be fixed.
Task A Task B
ext4_handle_error()
-> jbd2_journal_abort()
-> __journal_abort_soft()
-> __jbd2_journal_abort_hard()
| -> journal->j_flags |= JBD2_ABORT;
|
| __ext4_abort()
| -> jbd2_journal_abort()
| | -> __journal_abort_soft()
| | -> if (journal->j_flags & JBD2_ABORT)
| | return;
| -> panic()
|
-> jbd2_journal_update_sb_errno()
Tested-by: Hobin Woo <hobin.woo@samsung.com>
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Create separate predicate functions to test/set/clear feature flags,
thereby replacing the wordy old macros. Furthermore, clean out the
places where we open-coded feature tests.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Instead of overloading EIO for CRC errors and corrupt structures,
return the same error codes that XFS returns for the same issues.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Allow the filesystem to store the metadata checksum seed in the
superblock and add an incompat feature to say that we're using it.
This enables tune2fs to change the UUID on a mounted metadata_csum
FS without having to (racy!) rewrite all disk metadata.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This allows us to refactor the procfs code, which saves a bit of
compiled space. More importantly it isolates most of the procfs
support code into a single file, so it's easier to #ifdef it out if
the proc file system has been disabled.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Also statically allocate the ext4_kset and ext4_feat objects, since we
only need exactly one of each, and it's simpler and less code if we
drop the dynamic allocation and deallocation when it's not needed.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Many file systems that implement the show_options hook fail to correctly
escape their output which could lead to unescaped characters (e.g. new
lines) leaking into /proc/mounts and /proc/[pid]/mountinfo files. This
could lead to confusion, spoofed entries (resulting in things like
systemd issuing false d-bus "mount" notifications), and who knows what
else. This looks like it would only be the root user stepping on
themselves, but it's possible weird things could happen in containers or
in other situations with delegated mount privileges.
Here's an example using overlay with setuid fusermount trusting the
contents of /proc/mounts (via the /etc/mtab symlink). Imagine the use
of "sudo" is something more sneaky:
$ BASE="ovl"
$ MNT="$BASE/mnt"
$ LOW="$BASE/lower"
$ UP="$BASE/upper"
$ WORK="$BASE/work/ 0 0
none /proc fuse.pwn user_id=1000"
$ mkdir -p "$LOW" "$UP" "$WORK"
$ sudo mount -t overlay -o "lowerdir=$LOW,upperdir=$UP,workdir=$WORK" none /mnt
$ cat /proc/mounts
none /root/ovl/mnt overlay rw,relatime,lowerdir=ovl/lower,upperdir=ovl/upper,workdir=ovl/work/ 0 0
none /proc fuse.pwn user_id=1000 0 0
$ fusermount -u /proc
$ cat /proc/mounts
cat: /proc/mounts: No such file or directory
This fixes the problem by adding new seq_show_option and
seq_show_option_n helpers, and updating the vulnerable show_option
handlers to use them as needed. Some, like SELinux, need to be open
coded due to unusual existing escape mechanisms.
[akpm@linux-foundation.org: add lost chunk, per Kees]
[keescook@chromium.org: seq_show_option should be using const parameters]
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Cc: J. R. Okajima <hooanon05g@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
features and other churn going into 4.2.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV55TlAAoJEPL5WVaVDYGjyzYH/1WtZpIzRjp7o+3H4/vFqONg
R1Fsw785C1w8WX2QuIK/m31u4XO+VeCV4jWA9DuqnSzWm9w9C/4kTqITd4Hwp416
/9gJvYoZHHaDikxpWWADptDi8IoLohTlcFVCHIvvf53cGehVEEsc2WOijUZo7Cgv
O454Nm3tK0CQ3yrCIlf5SyvkUZSMTiawLLJJzd4GCyvU13C1SnABNQj8UxKisBA5
cP8q4O2nPg/S9rkYxnFAifQyZppd3jMvorUaq9eHiWMjl95o6e/6+wYGnHhoFUvr
/P1dNjJYbzk+TUzlsDkq2zANK2UsB3iNNi8YwLFOpfFcuYopmUAYRIWOgIZWYUQ=
=ijuI
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Pretty much all bug fixes and clean ups for 4.3, after a lot of
features and other churn going into 4.2"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Revert "ext4: remove block_device_ejected"
ext4: ratelimit the file system mounted message
ext4: silence a format string false positive
ext4: simplify some code in read_mmp_block()
ext4: don't manipulate recovery flag when freezing no-journal fs
jbd2: limit number of reserved credits
ext4 crypto: remove duplicate header file
ext4: update c/mtime on truncate up
jbd2: avoid infinite loop when destroying aborted journal
ext4, jbd2: add REQ_FUA flag when recording an error in the superblock
ext4 crypto: fix spelling typo in comment
ext4 crypto: exit cleanly if ext4_derive_key_aes() fails
ext4: reject journal options for ext2 mounts
ext4: implement cgroup writeback support
ext4: replace ext4_io_submit->io_op with ->io_wbc
ext4 crypto: check for too-short encrypted file names
ext4 crypto: use a jbd2 transaction when adding a crypto policy
jbd2: speedup jbd2_journal_dirty_metadata()
The xfstests ext4/305 will mount and unmount the same file system over
4,000 times, and each one of these will cause a system log message.
Ratelimit this message since if we are getting more than a few dozen
of these messages, they probably aren't going to be helpful.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
At some point along this sequence of changes:
f6e63f9 ext4: fold ext4_nojournal_sops into ext4_sops
bb04457 ext4: support freezing ext2 (nojournal) file systems
9ca9238 ext4: Use separate super_operations structure for no_journal filesystems
ext4 started setting needs_recovery on filesystems without journals
when they are unfrozen. This makes no sense, and in fact confuses
blkid to the point where it doesn't recognize the filesystem at all.
(freeze ext2; unfreeze ext2; run blkid; see no output; run dumpe2fs,
see needs_recovery set on fs w/ no journal).
To fix this, don't manipulate the INCOMPAT_RECOVER feature on
filesystems without journals.
Reported-by: Stu Mark <smark@datto.com>
Reviewed-by: Jan Kara <jack@suse.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
The functionality of ext3 is fully supported by ext4 driver. Major
distributions (SUSE, RedHat) already use ext4 driver to handle ext3
filesystems for quite some time. There is some ugliness in mm resulting
from jbd cleaning buffers in a dirty page without cleaning page dirty
bit and also support for buffer bouncing in the block layer when stable
pages are required is there only because of jbd. So let's remove the
ext3 driver. This saves us some 28k lines of duplicated code.
Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
When an error condition is detected, an error status should be recorded into
superblocks of EXT4 or JBD2. However, the write request is submitted now
without REQ_FUA flag, even in "barrier=1" mode, which is followed by
panic() function in "errors=panic" mode. On mobile devices which make
whole system reset as soon as kernel panic occurs, this write request
containing an error flag will disappear just from storage cache without
written to the physical cells. Therefore, when next start, even forever,
the error flag cannot be shown in both superblocks, and e2fsck cannot fix
the filesystem problems automatically, unless e2fsck is executed in
force checking mode.
[ Changed use test_opt(sb, BARRIER) of checking the journal flags -- TYT ]
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There is no reason to allow ext2 filesystems be mounted with journal
mount options. So, this patch adds them to the MOPT_NO_EXT2 mount
options list.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For ordered and writeback data modes, all data IOs go through
ext4_io_submit. This patch adds cgroup writeback support by invoking
wbc_init_bio() from io_submit_init_bio() and wbc_account_io() in
io_submit_add_bh(). Journal data which is written by jbd2 worker is
left alone by this patch and will always be written out from the root
cgroup.
ext4_fill_super() is updated to set MS_CGROUPWB when data mode is
either ordered or writeback. In journaled data mode, most IOs become
synchronous through the journal and enabling cgroup writeback support
doesn't make much sense or difference. Journaled data mode is left
alone.
Lightly tested with sequential data write workload. Behaves as
expected.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull more vfs updates from Al Viro:
"Assorted VFS fixes and related cleanups (IMO the most interesting in
that part are f_path-related things and Eric's descriptor-related
stuff). UFS regression fixes (it got broken last cycle). 9P fixes.
fs-cache series, DAX patches, Jan's file_remove_suid() work"
[ I'd say this is much more than "fixes and related cleanups". The
file_table locking rule change by Eric Dumazet is a rather big and
fundamental update even if the patch isn't huge. - Linus ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits)
9p: cope with bogus responses from server in p9_client_{read,write}
p9_client_write(): avoid double p9_free_req()
9p: forgetting to cancel request on interrupted zero-copy RPC
dax: bdev_direct_access() may sleep
block: Add support for DAX reads/writes to block devices
dax: Use copy_from_iter_nocache
dax: Add block size note to documentation
fs/file.c: __fget() and dup2() atomicity rules
fs/file.c: don't acquire files->file_lock in fd_install()
fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation
vfs: avoid creation of inode number 0 in get_next_ino
namei: make set_root_rcu() return void
make simple_positive() public
ufs: use dir_pages instead of ufs_dir_pages()
pagemap.h: move dir_pages() over there
remove the pointless include of lglock.h
fs: cleanup slight list_entry abuse
xfs: Correctly lock inode when removing suid and file capabilities
fs: Call security_ops->inode_killpriv on truncate
fs: Provide function telling whether file_remove_privs() will do anything
...
Merge second patchbomb from Andrew Morton:
- most of the rest of MM
- lots of misc things
- procfs updates
- printk feature work
- updates to get_maintainer, MAINTAINERS, checkpatch
- lib/ updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (96 commits)
exit,stats: /* obey this comment */
coredump: add __printf attribute to cn_*printf functions
coredump: use from_kuid/kgid when formatting corename
fs/reiserfs: remove unneeded cast
NILFS2: support NFSv2 export
fs/befs/btree.c: remove unneeded initializations
fs/minix: remove unneeded cast
init/do_mounts.c: add create_dev() failure log
kasan: remove duplicate definition of the macro KASAN_FREE_PAGE
fs/efs: femove unneeded cast
checkpatch: emit "NOTE: <types>" message only once after multiple files
checkpatch: emit an error when there's a diff in a changelog
checkpatch: validate MODULE_LICENSE content
checkpatch: add multi-line handling for PREFER_ETHER_ADDR_COPY
checkpatch: suggest using eth_zero_addr() and eth_broadcast_addr()
checkpatch: fix processing of MEMSET issues
checkpatch: suggest using ether_addr_equal*()
checkpatch: avoid NOT_UNIFIED_DIFF errors on cover-letter.patch files
checkpatch: remove local from codespell path
checkpatch: add --showfile to allow input via pipe to show filenames
...
This makes a very large function a little smaller.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull cgroup writeback support from Jens Axboe:
"This is the big pull request for adding cgroup writeback support.
This code has been in development for a long time, and it has been
simmering in for-next for a good chunk of this cycle too. This is one
of those problems that has been talked about for at least half a
decade, finally there's a solution and code to go with it.
Also see last weeks writeup on LWN:
http://lwn.net/Articles/648292/"
* 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits)
writeback, blkio: add documentation for cgroup writeback support
vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB
writeback: do foreign inode detection iff cgroup writeback is enabled
v9fs: fix error handling in v9fs_session_init()
bdi: fix wrong error return value in cgwb_create()
buffer: remove unusued 'ret' variable
writeback: disassociate inodes from dying bdi_writebacks
writeback: implement foreign cgroup inode bdi_writeback switching
writeback: add lockdep annotation to inode_to_wb()
writeback: use unlocked_inode_to_wb transaction in inode_congested()
writeback: implement unlocked_inode_to_wb transaction and use it for stat updates
writeback: implement [locked_]inode_to_wb_and_lock_list()
writeback: implement foreign cgroup inode detection
writeback: make writeback_control track the inode being written back
writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb()
mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use
writeback: implement memcg writeback domain based throttling
writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes
writeback: implement memcg wb_domain
writeback: update wb_over_bg_thresh() to use wb_domain aware operations
...
Newer versions of mount parse the lazytime feature and pass it to the
mount system call via the flags field in the mount system call,
removing the lazytime string from the mount options list. So we need
to check for the presence of MS_LAZYTIME and set it in sb->s_flags in
order for this flag to be set on a remount.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
In order to prevent quota block tracking to be inaccurate when
ext4_quota_write() fails with ENOSPC, we make two changes. The quota
file can now use the reserved block (since the quota file is arguably
file system metadata), and ext4_quota_write() now uses
ext4_should_retry_alloc() to retry the block allocation after a commit
has completed and released some blocks for allocation.
This fixes failures of xfstests generic/270:
Quota error (device vdc): write_blk: dquota write failed
Quota error (device vdc): qtree_write_dquot: Error -28 occurred while creating quota
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Normally all of the buffers will have been forced out to disk before
we call invalidate_bdev(), but there will be some cases, where a file
system operation was aborted due to an ext4_error(), where there may
still be some dirty buffers in the buffer cache for the device. So
try to force them out to memory before calling invalidate_bdev().
This fixes a warning triggered by generic/081:
WARNING: CPU: 1 PID: 3473 at /usr/projects/linux/ext4/fs/block_dev.c:56 __blkdev_put+0xb5/0x16f()
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Several ext4_warning() messages in the directory handling code do not
report the inode number of the (potentially corrupt) directory where a
problem is seen, and others report this in an ad-hoc manner. Add an
ext4_warning_inode() helper to print the inode number and command name
consistent with ext4_error_inode().
Consolidate the place in ext4.h that these macros are defined.
Clean up some other directory error and warning messages to print the
calling function name.
Minor code style fixes in nearby lines.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We currently don't correctly handle the case where blocksize !=
pagesize, so disallow the mount in those cases.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
With the planned cgroup writeback support, backing-dev related
declarations will be more widely used across block and cgroup;
unfortunately, including backing-dev.h from include/linux/blkdev.h
makes cyclic include dependency quite likely.
This patch separates out backing-dev-defs.h which only has the
essential definitions and updates blkdev.h to include it. c files
which need access to more backing-dev details now include
backing-dev.h directly. This takes backing-dev.h off the common
include dependency chain making it a lot easier to use it across block
and cgroup.
v2: fs/fat build failure fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@fb.com>
Crypto resource should be released when ext4 module exits, otherwise
it will cause memory leak.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As suggested by Herbert Xu, we shouldn't allocate a new tfm each time
we read or write a page. Instead we can use a single tfm hanging off
the inode's crypt_info structure for all of our encryption needs for
that inode, since the tfm can be used by multiple crypto requests in
parallel.
Also use cmpxchg() to avoid races that could result in crypt_info
structure getting doubly allocated or doubly freed.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The superblock fields s_file_encryption_mode and s_dir_encryption_mode
are vestigal, so remove them as a cleanup. While we're at it, allow
file systems with both encryption and inline_data enabled at the same
time to work correctly. We can't have encrypted inodes with inline
data, but there's no reason to prohibit unencrypted inodes from using
the inline data feature.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This is a pretty massive patch which does a number of different things:
1) The per-inode encryption information is now stored in an allocated
data structure, ext4_crypt_info, instead of directly in the node.
This reduces the size usage of an in-memory inode when it is not
using encryption.
2) We drop the ext4_fname_crypto_ctx entirely, and use the per-inode
encryption structure instead. This remove an unnecessary memory
allocation and free for the fname_crypto_ctx as well as allowing us
to reuse the ctfm in a directory for multiple lookups and file
creations.
3) We also cache the inode's policy information in the ext4_crypt_info
structure so we don't have to continually read it out of the
extended attributes.
4) We now keep the keyring key in the inode's encryption structure
instead of releasing it after we are done using it to derive the
per-inode key. This allows us to test to see if the key has been
revoked; if it has, we prevent the use of the derived key and free
it.
5) When an inode is released (or when the derived key is freed), we
will use memset_explicit() to zero out the derived key, so it's not
left hanging around in memory. This implies that when a user logs
out, it is important to first revoke the key, and then unlink it,
and then finally, to use "echo 3 > /proc/sys/vm/drop_caches" to
release any decrypted pages and dcache entries from the system
caches.
6) All this, and we also shrink the number of lines of code by around
100. :-)
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use struct ext4_encryption_key only for the master key passed via the
kernel keyring.
For internal kernel space users, we now use struct ext4_crypt_info.
This will allow us to put information from the policy structure so we
can cache it and avoid needing to constantly looking up the extended
attribute. We will do this in a spearate patch. This patch is mostly
mechnical to make it easier for patch review.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
Also add the test dummy encryption mode flag so we can more easily
test the encryption patches using xfstests.
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
