Modifying the post-send and post-recv to initialize the wqes slot by slot
dynamically depending on the number of max sges requested by consumer at
the time of QP creation.
Changed the QP creation logic to determine the size of SQ and RQ in 16B
slots based on the number of wqe and number of SGEs requested by consumer
Link: https://lore.kernel.org/r/1594822619-4098-6-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Adding few helper data structure which are useful to initialize hardware
send wqe in variable wqe mode.
Adding a qp flag in HSI to indicate variable wqe is enabled for this qp.
Link: https://lore.kernel.org/r/1594822619-4098-5-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The bnxt_re driver now allocates shadow sq and rq to maintain per wqe
wr_id and few other flags required to support variable wqe. Segregated the
allocation of shadow queue in a separate function and adjust the cqe
polling logic. The new polling logic is based on shadow queue indices.
Link: https://lore.kernel.org/r/1594822619-4098-3-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The bnxt_re driver need to decide on how much SQ and RQ memory should to
be allocated and which wqe posting/polling algorithm to use.
Making changes to set the wqe-mode to a default value during device
registration sequence. The wqe-mode is passed to the lower layer driver as
well. Going forward in the lower layer driver wqe-mode will be used to
decide execution path. Initializing the wqe-mode to static wqe type for
now.
Link: https://lore.kernel.org/r/1594822619-4098-2-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Restructring the data path and control path queue management code to
simplify the way a queue element is extracted from the hardware ring.
Introduced a new function which will give a pointer to the next ring item
depending upon the current cons/prod index in the hardware queue.
Further, there are hardcoding when size of queue entry is calculated,
replacing it with an inline function. This function would be easier to
expand if need going forward.
The code section to initialize the PSN search areas has also been
restructured and couple of functions has been added there.
Link: https://lore.kernel.org/r/1585851136-2316-4-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Destroy CQ command to firmware returns the num_cnq_events as a
response. This indicates the driver about the number of CQ events
generated for this CQ. Driver should wait for all these events before
freeing the CQ host structures. Also, add routine to clean all the
pending notification for the CQs getting destroyed. This avoids the
possibility of accessing the CQ data structures after its freed.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/1584120842-3200-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Moving all the fast path doorbell functions at one place under
qplib_res.h. To pass doorbell record information a new structure
bnxt_qplib_db_info has been introduced. Every roce object holds an
instance of this structure and doorbell information is initialized during
resource creation.
When DB is rung only the current queue index is read from hardware ring
and rest of the data is taken from pre-initialized dbinfo structure.
Link: https://lore.kernel.org/r/1581786665-23705-8-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Cleaning up the notification queue data structures and management
code. The CQ and SRQ event handlers have been type defined instead of
in-place declaration. NQ doorbell register descriptor has been added in
base NQ structure. The nq->vector has been renamed to nq->msix_vec.
Link: https://lore.kernel.org/r/1581786665-23705-7-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
At top level there are three major data structure addition. viz
bnxt_qplib_hwq_attr, bnxt_qplib_sg_info and bnxt_qplib_tqm_ctx
Intorduction of first data structure reduces the arguments list to
bnxt_re_alloc_init_hwq() function. There are changes all over the driver
code to incorporate this new structure. The caller needs to fill the
attribute data structure and pass to this function.
The second data structure is to pass memory region description
viz. sghead, page_size and page_shift. There are changes all over the
driver code to initialize bnxt_re_sg_info data structure. The new data
structure helps to reduce the argument list of __alloc_pbl() function
call.
Till now the TQM rings related members were not collected under any
specific data-structure making it hard to manage. The third data
sctructure bnxt_qplib_tqm_ctx is added to refactor the TQM queue
allocation and initialization.
Link: https://lore.kernel.org/r/1581786665-23705-4-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Convert SRQ allocation from drivers to be in the IB/core
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
umem->nmap is used while allocating internal buffer for storing
page DMA addresses. This causes out of bounds array access while iterating
the umem DMA-mapped SGL with umem page combining as umem->nmap can be
less than number of system pages in umem.
Use ib_umem_num_pages() instead of umem->nmap to size the page array.
Add a new structure (bnxt_qplib_sg_info) to pass sglist, npages and nmap.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The new 57500 series of adapter has bigger psn search structure. The size
of new structure is 16B. Changing the control path memory allocation and
fast path code to accommodate the new psn structure while maintaining the
backward compatibility.
There are few additional changes listed below:
- For 57500 chip max-sge are limited to 6 for now.
- For 57500 chip max-receive-sge should be set to 6 for now.
- Add driver/hardware interface structure for new chip.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the new 57500 series of adapters the GSI qp is a UD type QP unlike the
previous generation where it was a Raw Eth QP. Changing the control and
data path to support the same. Listing all the significant diffs:
- AH creation resolve network type unconditionally
- Add check at relevant places to distinguish from Raw Eth
processing flow.
- bnxt_re_process_res_ud_wc report completion with GRH flag
when qp is GSI.
- Change length, cfa_meta and smac to match new driver/hardware
interface.
- Add new driver/hardware interface.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The new chip series has 64 bit doorbell for notification queues. Thus,
both control and data path event queues need new routines to write 64 bit
doorbell. Adding the same. There is new doorbell interface between the
chip and driver. Changing the chip specific data structure definitions.
Additional significant changes are listed below
- bnxt_re_net_ring_free/alloc takes a new argument
- bnxt_qplib_enable_nq and enable_rcfw uses new doorbell offset
for new chip.
- DB mapping for NQ and CREQ now maps 8 bytes.
- DBR_DBR_* macros renames to DBC_DBC_*
- store nq_db_offset in a 32bit data type.
- got rid of __iowrite64_copy, used writeq instead.
- changed the DB header initialization to simpler scheme.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adding setup and destroy routines for chip-context. The chip context would
be used frequently in control and data path to take execution flow
depending on the chip type. chip context structure pointer is added to
the relevant data structures.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The recent changes in Broadcom's ethernet driver(L2 driver) broke
RoCE functionality in terms of MSIx vector allocation and
de-allocation.
There is a possibility that L2 driver would initiate MSIx vector
reallocation depending upon the requests coming from administrator.
In such cases L2 driver needs to free up all the MSIx vectors
allocated previously and reallocate/initialize those.
If RoCE driver is loaded and reshuffling is attempted, there will be
kernel crashes because RoCE driver would still be holding the MSIx
vectors but L2 driver would attempt to free in-use vectors. Thus
leading to a kernel crash.
Making changes in roce driver to fix crashes described above.
As part of solution L2 driver tells RoCE driver to release
the MSIx vector whenever there is a need. When RoCE driver
get message it sync up with all the running tasklets and IRQ
handlers and releases the vectors. L2 driver send one more
message to RoCE driver to resume the MSIx vectors. L2 driver
guarantees that RoCE vector do not change during reshuffling.
Fixes: ec86f14ea5 ("bnxt_en: Add ULP calls to stop and restart IRQs.")
Fixes: 08654eb213 ("bnxt_en: Change IRQ assignment for RDMA driver.")
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Hitting the following hardlockup due to a race condition in
error CQE processing.
[26146.879798] bnxt_en 0000:04:00.0: QPLIB: FP: CQ Processed Req
[26146.886346] bnxt_en 0000:04:00.0: QPLIB: wr_id[1251] = 0x0 with status 0xa
[26156.350935] NMI watchdog: Watchdog detected hard LOCKUP on cpu 4
[26156.357470] Modules linked in: nfsd auth_rpcgss nfs_acl lockd grace
[26156.447957] CPU: 4 PID: 3413 Comm: kworker/4:1H Kdump: loaded
[26156.457994] Hardware name: Dell Inc. PowerEdge R430/0CN7X8,
[26156.466390] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
[26156.472639] Call Trace:
[26156.475379] <NMI> [<ffffffff98d0d722>] dump_stack+0x19/0x1b
[26156.481833] [<ffffffff9873f775>] watchdog_overflow_callback+0x135/0x140
[26156.489341] [<ffffffff9877f237>] __perf_event_overflow+0x57/0x100
[26156.496256] [<ffffffff98787c24>] perf_event_overflow+0x14/0x20
[26156.502887] [<ffffffff9860a580>] intel_pmu_handle_irq+0x220/0x510
[26156.509813] [<ffffffff98d16031>] perf_event_nmi_handler+0x31/0x50
[26156.516738] [<ffffffff98d1790c>] nmi_handle.isra.0+0x8c/0x150
[26156.523273] [<ffffffff98d17be8>] do_nmi+0x218/0x460
[26156.528834] [<ffffffff98d16d79>] end_repeat_nmi+0x1e/0x7e
[26156.534980] [<ffffffff987089c0>] ? native_queued_spin_lock_slowpath+0x1d0/0x200
[26156.543268] [<ffffffff987089c0>] ? native_queued_spin_lock_slowpath+0x1d0/0x200
[26156.551556] [<ffffffff987089c0>] ? native_queued_spin_lock_slowpath+0x1d0/0x200
[26156.559842] <EOE> [<ffffffff98d083e4>] queued_spin_lock_slowpath+0xb/0xf
[26156.567555] [<ffffffff98d15690>] _raw_spin_lock+0x20/0x30
[26156.573696] [<ffffffffc08381a1>] bnxt_qplib_lock_buddy_cq+0x31/0x40 [bnxt_re]
[26156.581789] [<ffffffffc083bbaa>] bnxt_qplib_poll_cq+0x43a/0xf10 [bnxt_re]
[26156.589493] [<ffffffffc083239b>] bnxt_re_poll_cq+0x9b/0x760 [bnxt_re]
The issue happens if RQ poll_cq or SQ poll_cq or Async error event tries to
put the error QP in flush list. Since SQ and RQ of each error qp are added
to two different flush list, we need to protect it using locks of
corresponding CQs. Difference in order of acquiring the lock in
SQ poll_cq and RQ poll_cq can cause a hard lockup.
Revisits the locking strategy and removes the usage of qplib_cq.hwq.lock.
Instead of this lock, introduces qplib_cq.flush_lock to handle
addition/deletion of QPs in flush list. Also, always invoke the flush_lock
in order (SQ CQ lock first and then RQ CQ lock) to avoid any potential
deadlock.
Other than the poll_cq context, the movement of QP to/from flush list can
be done in modify_qp context or from an async error event from HW.
Synchronize these operations using the bnxt_re verbs layer CQ locks.
To achieve this, adds a call back to the HW abstraction layer(qplib) to
bnxt_re ib_verbs layer in case of async error event. Also, removes the
buddy cq functions as it is no longer required.
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Avoid system crash when destroy_qp is invoked while
the driver is processing the poll_cq. Synchronize these
functions using the cq_lock.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Shared receive queue (SRQ) is defined as a pool of
receive buffers shared among multiple QPs which belong
to same protection domain in a given process context.
Use of SRQ reduces the memory foot print of IB applications.
Broadcom adapters support SRQ, adding code-changes to enable
shared receive queue.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Destroy_qp shall wait for any outstanding CQ notification to be
flushed out before proceeding with QP destroy. Flushing the WQ
before destroying the QP.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Enables multiple Interrupt vectors. Driver is requesting the max
MSIX vectors based on the number of online cpus and creates upto
9 MSIx vectors (1 for control path and 8 for data path).
A tasklet is created for each of these vectors. NQs are assigned
to CQs in round robin fashion.
This patch also adds IRQ affinity hint for the MSIX vector of each NQ.
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch allows driver to post send and receive
requests on QPs which are in error state.
Instead of flushing the QP in the context of polling
error CQEs, the QPs will be added to a flush list
maintained per CQ. QP state is moved to error.
QP is added to flush list if the user moves it
to error state using modify_qp also. After polling the HW
CQ in poll_cq routine, this flush list is traversed
and driver completes work requests on each QP in the flush
list, till the budget expires. The QP is moved out of
flush list during QP destroy or during modify_QP to RESET.
When ULPs post Work Requests while QP is in error state,
driver will store the ULP data and then increment the
QP producer s/w index, without ringing doorbell. It then
schedules a worker to invoke the CQ handler since the
interrupts wont be generated from the HW for this request.
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
While invoking the req_notify_cq hook, ULPs can request
whether the CQs have any CQEs pending. If CQEs are pending,
drivers can indicate it by returning 1 for req_notify_cq.
The stack will poll CQ again till CQ is empty.
This patch peeks the CQ for any valid entries and return accordingly.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
HW stalls out after 0x800000 WQEs are posted for UD QPs.
To workaround this problem, driver will send a modify_qp cmd
to the HW at around the halfway mark(0x400000) so that FW
can accordingly modify the QP context in the HW to prevent this
stall.
This workaround needs to be done for UD, QP1 and Raw Ethertype
packets. Added a counter to keep track of WQEs posted during post_send.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch implements the following HW workarounds
1. The SQ depth needs to be augmented by 128 + 1 to avoid running
into an Out of order CQE issue
2. Workaround to handle the problem where the HW fast path engine continues
to access DMA memory in retranmission mode even after the WQE has
already been completed. If the HW reports this condition, driver detects
it and posts a Fence WQE. The driver stops reporting the completions
to stack until it receives completion for Fence WQE.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch introduces the RoCE driver for the Broadcom
NetXtreme-E 10/25/40/50G RoCE HCAs.
The RoCE driver is a two part driver that relies on the parent
bnxt_en NIC driver to operate. The changes needed in the bnxt_en
driver have already been incorporated via Dave Miller's net tree
into the mainline kernel.
The vendor official git repository for this driver is available
on github as:
https://github.com/Broadcom/linux-rdma-nxt/
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
