Commit graph

3000 commits

Author SHA1 Message Date
Steven Rostedt (Red Hat)
0f72e37e42 tracing: Add sched_wakeup_new and sched_waking tracepoints for pid filter
The set_event_pid filter relies on attaching to the sched_switch and
sched_wakeup tracepoints to see if it should filter the tracing on schedule
tracepoints. By adding the callbacks to sched_wakeup, pids in the
set_event_pid file will trace the wakeups of those tasks with those pids.

But sched_wakeup_new and sched_waking were missed. These two should also be
traced. Luckily, these tracepoints share the same class as sched_wakeup
which means they can use the same pre and post callbacks as sched_wakeup
does.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-12-01 16:08:05 -05:00
Steven Rostedt (Red Hat)
bd1b7cd360 ring-buffer: Put back the length if crossed page with add_timestamp
Commit fcc742eaad "ring-buffer: Add event descriptor to simplify passing
data" added a descriptor that holds various data instead of passing around
several variables through parameters. The problem was that one of the
parameters was modified in a function and the code was designed not to have
an effect on that modified  parameter. Now that the parameter is a
descriptor and any modifications to it are non-volatile, the size of the
data could be unnecessarily expanded.

Remove the extra space added if a timestamp was added and the event went
across the page.

Cc: stable@vger.kernel.org # 4.3+
Fixes: fcc742eaad "ring-buffer: Add event descriptor to simplify passing data"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-24 09:27:25 -05:00
Steven Rostedt (Red Hat)
b81f472a20 ring-buffer: Update read stamp with first real commit on page
Do not update the read stamp after swapping out the reader page from the
write buffer. If the reader page is swapped out of the buffer before an
event is written to it, then the read_stamp may get an out of date
timestamp, as the page timestamp is updated on the first commit to that
page.

rb_get_reader_page() only returns a page if it has an event on it, otherwise
it will return NULL. At that point, check if the page being returned has
events and has not been read yet. Then at that point update the read_stamp
to match the time stamp of the reader page.

Cc: stable@vger.kernel.org # 2.6.30+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-24 09:23:17 -05:00
Linus Torvalds
0e97606425 This contains three more clean up patches.
One patch is needed to make tracing work without debugfs now that tracing
 uses its own tracefs.
 
 The second is removing an unused variable.
 
 The third is fixing a warning about unused variables when MAX_TRACER is
 not configured. Note, this warning shows up in gcc 6.0, but does not show
 up in gcc 4.9, as it seems that gcc does not complain about constants
 not being used.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWRKA+AAoJEKKk/i67LK/8BZ4H/0UgA8+OpbUmBHQk/RdMRZW2
 BSwO/GuErq3nSKJUjP4f3b4BGdMoFgThIOxR9dvHKwJvGfwpbTivpgR0OqUdFKAZ
 1FyUT/oNM0ySNGpZFGuMQ9hvR+deeUvvyPhosjPWlxZLSnRSsEzTlePUqikX1VY6
 hEQj+ulK8J0iLlHMDYLJ5FkQ10+owrI2vmT8BU1O8KZN8EBvhoUx4EfJewD63/pa
 Gzjm6C9RpVb6ks555NmwFzLeN1Yd5X4n5m2CQFrIpzBgRlibWIGCPMVe7OgNawMu
 wONNvhq9zLfo3pftS092lek4iPgEw7ypl6iEgBxDzqTIAjSxUqf+N+1xIbOCcOE=
 =GikR
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull trace cleanups from Steven Rostedt:
 "This contains three more clean up patches.

  One patch is needed to make tracing work without debugfs now that
  tracing uses its own tracefs.

  The second is removing an unused variable.

  The third is fixing a warning about unused variables when MAX_TRACER
  is not configured.  Note, this warning shows up in gcc 6.0, but does
  not show up in gcc 4.9, as it seems that gcc does not complain about
  constants not being used"

* tag 'trace-v4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: #ifdef out uses of max trace when CONFIG_TRACER_MAX_TRACE is not set
  tracing: Remove unused ftrace_cpu_disabled per cpu variable
  tracing: Make tracing work when debugfs is not configured in
2015-11-12 16:22:54 -08:00
Linus Torvalds
2df4ee78d0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix null deref in xt_TEE netfilter module, from Eric Dumazet.

 2) Several spots need to get to the original listner for SYN-ACK
    packets, most spots got this ok but some were not.  Whilst covering
    the remaining cases, create a helper to do this.  From Eric Dumazet.

 3) Missiing check of return value from alloc_netdev() in CAIF SPI code,
    from Rasmus Villemoes.

 4) Don't sleep while != TASK_RUNNING in macvtap, from Vlad Yasevich.

 5) Use after free in mvneta driver, from Justin Maggard.

 6) Fix race on dst->flags access in dst_release(), from Eric Dumazet.

 7) Add missing ZLIB_INFLATE dependency for new qed driver.  From Arnd
    Bergmann.

 8) Fix multicast getsockopt deadlock, from WANG Cong.

 9) Fix deadlock in btusb, from Kuba Pawlak.

10) Some ipv6_add_dev() failure paths were not cleaning up the SNMP6
    counter state.  From Sabrina Dubroca.

11) Fix packet_bind() race, which can cause lost notifications, from
    Francesco Ruggeri.

12) Fix MAC restoration in qlcnic driver during bonding mode changes,
    from Jarod Wilson.

13) Revert bridging forward delay change which broke libvirt and other
    userspace things, from Vlad Yasevich.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
  Revert "bridge: Allow forward delay to be cfgd when STP enabled"
  bpf_trace: Make dependent on PERF_EVENTS
  qed: select ZLIB_INFLATE
  net: fix a race in dst_release()
  net: mvneta: Fix memory use after free.
  net: Documentation: Fix default value tcp_limit_output_bytes
  macvtap: Resolve possible __might_sleep warning in macvtap_do_read()
  mvneta: add FIXED_PHY dependency
  net: caif: check return value of alloc_netdev
  net: hisilicon: NET_VENDOR_HISILICON should depend on HAS_DMA
  drivers: net: xgene: fix RGMII 10/100Mb mode
  netfilter: nft_meta: use skb_to_full_sk() helper
  net_sched: em_meta: use skb_to_full_sk() helper
  sched: cls_flow: use skb_to_full_sk() helper
  netfilter: xt_owner: use skb_to_full_sk() helper
  smack: use skb_to_full_sk() helper
  net: add skb_to_full_sk() helper and use it in selinux_netlbl_skbuff_setsid()
  bpf: doc: correct arch list for supported eBPF JIT
  dwc_eth_qos: Delete an unnecessary check before the function call "of_node_put"
  bonding: fix panic on non-ARPHRD_ETHER enslave failure
  ...
2015-11-10 18:11:41 -08:00
Steven Rostedt
a31d82d85a bpf_trace: Make dependent on PERF_EVENTS
Arnd Bergmann reported:

  In my ARM randconfig tests, I'm getting a build error for
  newly added code in bpf_perf_event_read and bpf_perf_event_output
  whenever CONFIG_PERF_EVENTS is disabled:

  kernel/trace/bpf_trace.c: In function 'bpf_perf_event_read':
  kernel/trace/bpf_trace.c:203:11: error: 'struct perf_event' has no member named 'oncpu'
  if (event->oncpu != smp_processor_id() ||
           ^
  kernel/trace/bpf_trace.c:204:11: error: 'struct perf_event' has no member named 'pmu'
        event->pmu->count)

  This can happen when UPROBE_EVENT is enabled but KPROBE_EVENT
  is disabled. I'm not sure if that is a configuration we care
  about, otherwise we could prevent this case from occuring by
  adding Kconfig dependencies.

Looking at this further, it's really that UPROBE_EVENT enables PERF_EVENTS.
By just having BPF_EVENTS depend on PERF_EVENTS, then all is fine.

Link: http://lkml.kernel.org/r/4525348.Aq9YoXkChv@wuerfel
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-10 15:40:14 -05:00
Chen Gang
e428abbbf6 tracing: #ifdef out uses of max trace when CONFIG_TRACER_MAX_TRACE is not set
tracing_max_lat_fops is used only when TRACER_MAX_TRACE enabled, so also
swith the related code. The related warning with defconfig under x86_64:

    CC      kernel/trace/trace.o
  kernel/trace/trace.c:5466:37: warning: ‘tracing_max_lat_fops’ defined but not used [-Wunused-const-variable]
   static const struct file_operations tracing_max_lat_fops = {

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-10 10:16:05 -05:00
Dmitry Safonov
03e88ae6b3 tracing: Remove unused ftrace_cpu_disabled per cpu variable
Since the ring buffer is lockless, there is no need to disable ftrace on
CPU. And no one doing so: after commit 68179686ac ("tracing: Remove
ftrace_disable/enable_cpu()") ftrace_cpu_disabled stays the same after
initialization, nothing changes it.
ftrace_cpu_disabled shouldn't be used by any external module since it
disables only function and graph_function tracers but not any other
tracer.

Link: http://lkml.kernel.org/r/1446836846-22239-1-git-send-email-0x7f454c46@gmail.com

Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-07 13:25:14 -05:00
Linus Torvalds
22402cd0af Most of the changes are clean ups and small fixes. Some of them have
stable tags to them. I searched through my INBOX just as the merge window
 opened and found lots of patches to pull. I ran them through all my tests
 and they were in linux-next for a few days.
 
 Features added this release:
 ----------------------------
 
  o Module globbing. You can now filter function tracing to several
    modules. # echo '*:mod:*snd*' > set_ftrace_filter (Dmitry Safonov)
 
  o Tracer specific options are now visible even when the tracer is not
    active. It was rather annoying that you can only see and modify tracer
    options after enabling the tracer. Now they are in the options/ directory
    even when the tracer is not active. Although they are still only visible
    when the tracer is active in the trace_options file.
 
  o Trace options are now per instance (although some of the tracer specific
    options are global)
 
  o New tracefs file: set_event_pid. If any pid is added to this file, then
    all events in the instance will filter out events that are not part of
    this pid. sched_switch and sched_wakeup events handle next and the wakee
    pids.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWPLQ5AAoJEKKk/i67LK/8CTYIAI1u8DE5QCzv3J0p54jVpNVR
 J5FqEU3eXIzd6FS4JXD4nxCeMpUZAy21YnhlZpsnrbJJM5bc9bUsBCwiKKM+MuSZ
 ztmy2sgYKkO0h/KUdhNgYJrzis3/Ojquyx9iAqK5ST/Fr+nKYx81akFKjNK53iur
 RJRut45sSa8rv11LaL8sgJ6hAWQTc+YkybUdZ5xaMdJmZ6A61T7Y6VzTjbUexuvL
 hntCfTjYLtVd8dbfknAnf3B7n/VOO3IFF85wr7ciYR5oEVfPrF8tHmJBlhHExPpX
 kaXAiDDRY/UTg/5DQqnp4zmxJoR5BQ2l4pT5PwiLcnwhcphIDNYS8EYUmOYAWjU=
 =TjOE
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracking updates from Steven Rostedt:
 "Most of the changes are clean ups and small fixes.  Some of them have
  stable tags to them.  I searched through my INBOX just as the merge
  window opened and found lots of patches to pull.  I ran them through
  all my tests and they were in linux-next for a few days.

  Features added this release:
  ----------------------------

   - Module globbing.  You can now filter function tracing to several
     modules.  # echo '*:mod:*snd*' > set_ftrace_filter (Dmitry Safonov)

   - Tracer specific options are now visible even when the tracer is not
     active.  It was rather annoying that you can only see and modify
     tracer options after enabling the tracer.  Now they are in the
     options/ directory even when the tracer is not active.  Although
     they are still only visible when the tracer is active in the
     trace_options file.

   - Trace options are now per instance (although some of the tracer
     specific options are global)

   - New tracefs file: set_event_pid.  If any pid is added to this file,
     then all events in the instance will filter out events that are not
     part of this pid.  sched_switch and sched_wakeup events handle next
     and the wakee pids"

* tag 'trace-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits)
  tracefs: Fix refcount imbalance in start_creating()
  tracing: Put back comma for empty fields in boot string parsing
  tracing: Apply tracer specific options from kernel command line.
  tracing: Add some documentation about set_event_pid
  ring_buffer: Remove unneeded smp_wmb() before wakeup of reader benchmark
  tracing: Allow dumping traces without tracking trace started cpus
  ring_buffer: Fix more races when terminating the producer in the benchmark
  ring_buffer: Do no not complete benchmark reader too early
  tracing: Remove redundant TP_ARGS redefining
  tracing: Rename max_stack_lock to stack_trace_max_lock
  tracing: Allow arch-specific stack tracer
  recordmcount: arm64: Replace the ignored mcount call into nop
  recordmcount: Fix endianness handling bug for nop_mcount
  tracepoints: Fix documentation of RCU lockdep checks
  tracing: ftrace_event_is_function() can return boolean
  tracing: is_legal_op() can return boolean
  ring-buffer: rb_event_is_commit() can return boolean
  ring-buffer: rb_per_cpu_empty() can return boolean
  ring_buffer: ring_buffer_empty{cpu}() can return boolean
  ring-buffer: rb_is_reader_page() can return boolean
  ...
2015-11-06 13:30:20 -08:00
Jiaxing Wang
8b1291994d tracing: Make tracing work when debugfs is not configured in
Currently tracing_init_dentry() returns -ENODEV when debugfs is not
configured in, which causes tracefs not populated with tracing files and
directories, so we will get an empty directory even after we manually
mount tracefs.

We can make tracing_init_dentry() return NULL if debugfs is not
configured in and can manually mount tracefs. But return -ENODEV
if debugfs is configured in but not initialized or failed to create
automount point as that would break backward compatibility with older
tools.

Link: http://lkml.kernel.org/r/1446797056-11683-1-git-send-email-hello.wjx@gmail.com

Signed-off-by: Jiaxing Wang <hello.wjx@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-06 10:02:33 -05:00
Linus Torvalds
d9734e0d1c Merge branch 'for-4.4/core' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
 "This is the core block pull request for 4.4.  I've got a few more
  topic branches this time around, some of them will layer on top of the
  core+drivers changes and will come in a separate round.  So not a huge
  chunk of changes in this round.

  This pull request contains:

   - Enable blk-mq page allocation tracking with kmemleak, from Catalin.

   - Unused prototype removal in blk-mq from Christoph.

   - Cleanup of the q->blk_trace exchange, using cmpxchg instead of two
     xchg()'s, from Davidlohr.

   - A plug flush fix from Jeff.

   - Also from Jeff, a fix that means we don't have to update shared tag
     sets at init time unless we do a state change.  This cuts down boot
     times on thousands of devices a lot with scsi/blk-mq.

   - blk-mq waitqueue barrier fix from Kosuke.

   - Various fixes from Ming:

        - Fixes for segment merging and splitting, and checks, for
          the old core and blk-mq.

        - Potential blk-mq speedup by marking ctx pending at the end
          of a plug insertion batch in blk-mq.

        - direct-io no page dirty on kernel direct reads.

   - A WRITE_SYNC fix for mpage from Roman"

* 'for-4.4/core' of git://git.kernel.dk/linux-block:
  blk-mq: avoid excessive boot delays with large lun counts
  blktrace: re-write setting q->blk_trace
  blk-mq: mark ctx as pending at batch in flush plug path
  blk-mq: fix for trace_block_plug()
  block: check bio_mergeable() early before merging
  blk-mq: check bio_mergeable() early before merging
  block: avoid to merge splitted bio
  block: setup bi_phys_segments after splitting
  block: fix plug list flushing for nomerge queues
  blk-mq: remove unused blk_mq_clone_flush_request prototype
  blk-mq: fix waitqueue_active without memory barrier in block/blk-mq-tag.c
  fs: direct-io: don't dirtying pages for ITER_BVEC/ITER_KVEC direct read
  fs/mpage.c: forgotten WRITE_SYNC in case of data integrity write
  block: kmemleak: Track the page allocations for struct request
2015-11-04 20:28:10 -08:00
Linus Torvalds
b0f85fa11a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

Changes of note:

 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell.

 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from
    David Ahern.

 3) Allow the user to ask for the statistics to be filtered out of
    ipv4/ipv6 address netlink dumps.  From Sowmini Varadhan.

 4) More work to pass the network namespace context around deep into
    various packet path APIs, starting with the netfilter hooks.  From
    Eric W Biederman.

 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas
    Richter.

 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng.

 7) Support Very High Throughput in wireless MESH code, from Bob
    Copeland.

 8) Allow setting the ageing_time in switchdev/rocker.  From Scott
    Feldman.

 9) Properly autoload L2TP type modules, from Stephen Hemminger.

10) Fix and enable offload features by default in 8139cp driver, from
    David Woodhouse.

11) Support both ipv4 and ipv6 sockets in a single vxlan device, from
    Jiri Benc.

12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning
    Opstad.

13) Fix IPSEC flowcache overflows on large systems, from Steffen
    Klassert.

14) Convert bridging to track VLANs using rhashtable entries rather than
    a bitmap.  From Nikolay Aleksandrov.

15) Make TCP listener handling completely lockless, this is a major
    accomplishment.  Incoming request sockets now live in the
    established hash table just like any other socket too.

    From Eric Dumazet.

15) Provide more bridging attributes to netlink, from Nikolay
    Aleksandrov.

16) Use hash based algorithm for ipv4 multipath routing, this was very
    long overdue.  From Peter Nørlund.

17) Several y2038 cures, mostly avoiding timespec.  From Arnd Bergmann.

18) Allow non-root execution of EBPF programs, from Alexei Starovoitov.

19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet.  This
    influences the port binding selection logic used by SO_REUSEPORT.

20) Add ipv6 support to VRF, from David Ahern.

21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko.

22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen.

23) Implement RACK loss recovery in TCP, from Yuchung Cheng.

24) Support multipath routes in MPLS, from Roopa Prabhu.

25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric
    Dumazet.

26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and
    Sudarsana Kalluru.

27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic
    Sowa.

28) Support ipv6 geneve tunnels, from John W Linville.

29) Add flood control support to switchdev layer, from Ido Schimmel.

30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from
    Hannes Frederic Sowa.

31) Support persistent maps and progs in bpf, from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits)
  sh_eth: use DMA barriers
  switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion
  net: sched: kill dead code in sch_choke.c
  irda: Delete an unnecessary check before the function call "irlmp_unregister_service"
  net: dsa: mv88e6xxx: include DSA ports in VLANs
  net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports
  net/core: fix for_each_netdev_feature
  vlan: Invoke driver vlan hooks only if device is present
  arcnet/com20020: add LEDS_CLASS dependency
  bpf, verifier: annotate verbose printer with __printf
  dp83640: Only wait for timestamps for packets with timestamping enabled.
  ptp: Change ptp_class to a proper bitmask
  dp83640: Prune rx timestamp list before reading from it
  dp83640: Delay scheduled work.
  dp83640: Include hash in timestamp/packet matching
  ipv6: fix tunnel error handling
  net/mlx5e: Fix LSO vlan insertion
  net/mlx5e: Re-eanble client vlan TX acceleration
  net/mlx5e: Return error in case mlx5e_set_features() fails
  net/mlx5e: Don't allow more than max supported channels
  ...
2015-11-04 09:41:05 -08:00
Steven Rostedt (Red Hat)
43ed384339 tracing: Put back comma for empty fields in boot string parsing
Both early_enable_events() and apply_trace_boot_options() parse a boot
string that may get parsed later on. They both use strsep() which converts a
comma into a nul character. To still allow the boot string to be parsed
again the same way, the nul character gets converted back to a comma after
the token is processed.

The problem is that these two functions check for an empty parameter (two
commas in a row ",,"), and continue the loop if the parameter is empty, but
fails to place the comma back. In this case, the second parsing will end at
this blank field, and not process fields afterward.

In most cases, users should not have an empty field, but if its going to be
checked, the code might as well be correct.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-03 22:15:14 -05:00
Jiaxing Wang
a4d1e68823 tracing: Apply tracer specific options from kernel command line.
Currently, the trace_options parameter is only applied in
tracer_alloc_buffers() when global_trace.current_trace is nop_trace,
so a tracer specific option will not be applied even when the specific
tracer is also enabled from kernel command line. For example, the
'func_stack_trace' option can't be enabled with the following kernel
parameter:

  ftrace=function ftrace_filter=kfree trace_options=func_stack_trace

We can enable tracer specific options by simply apply the options again
if the specific tracer is also supplied from command line and started
in register_tracer().

To make trace_boot_options_buf can be parsed again, a comma and a space
is put back if they were replaced by strsep and strstrip respectively.

Also make register_tracer() be __init to access the __init data, and
in fact register_tracer is only called from __init code.

Link: http://lkml.kernel.org/r/1446599669-9294-1-git-send-email-hello.wjx@gmail.com

Signed-off-by: Jiaxing Wang <hello.wjx@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-03 21:51:43 -05:00
Linus Torvalds
53528695ff Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler changes from Ingo Molnar:
 "The main changes in this cycle were:

   - sched/fair load tracking fixes and cleanups (Byungchul Park)

   - Make load tracking frequency scale invariant (Dietmar Eggemann)

   - sched/deadline updates (Juri Lelli)

   - stop machine fixes, cleanups and enhancements for bugs triggered by
     CPU hotplug stress testing (Oleg Nesterov)

   - scheduler preemption code rework: remove PREEMPT_ACTIVE and related
     cleanups (Peter Zijlstra)

   - Rework the sched_info::run_delay code to fix races (Peter Zijlstra)

   - Optimize per entity utilization tracking (Peter Zijlstra)

   - ... misc other fixes, cleanups and smaller updates"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
  sched: Don't scan all-offline ->cpus_allowed twice if !CONFIG_CPUSETS
  sched: Move cpu_active() tests from stop_two_cpus() into migrate_swap_stop()
  sched: Start stopper early
  stop_machine: Kill cpu_stop_threads->setup() and cpu_stop_unpark()
  stop_machine: Kill smp_hotplug_thread->pre_unpark, introduce stop_machine_unpark()
  stop_machine: Change cpu_stop_queue_two_works() to rely on stopper->enabled
  stop_machine: Introduce __cpu_stop_queue_work() and cpu_stop_queue_two_works()
  stop_machine: Ensure that a queued callback will be called before cpu_stop_park()
  sched/x86: Fix typo in __switch_to() comments
  sched/core: Remove a parameter in the migrate_task_rq() function
  sched/core: Drop unlikely behind BUG_ON()
  sched/core: Fix task and run queue sched_info::run_delay inconsistencies
  sched/numa: Fix task_tick_fair() from disabling numa_balancing
  sched/core: Add preempt_count invariant check
  sched/core: More notrace annotations
  sched/core: Kill PREEMPT_ACTIVE
  sched/core, sched/x86: Kill thread_info::saved_preempt_count
  sched/core: Simplify preempt_count tests
  sched/core: Robustify preemption leak checks
  sched/core: Stop setting PREEMPT_ACTIVE
  ...
2015-11-03 18:03:50 -08:00
Steven Rostedt (Red Hat)
54ed144405 ring_buffer: Remove unneeded smp_wmb() before wakeup of reader benchmark
wake_up_process() has a memory barrier before doing anything, thus adding a
memory barrier before calling it is redundant.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-03 16:19:02 -05:00
Sasha Levin
919cd97999 tracing: Allow dumping traces without tracking trace started cpus
We don't init iter->started when dumping the ftrace buffer, and there's no
real need to do so - so allow skipping that check if the iter doesn't have
an initialized ->started cpumask.

Link: http://lkml.kernel.org/r/1441385156-27279-1-git-send-email-sasha.levin@oracle.com

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-03 16:10:08 -05:00
Petr Mladek
f47cb66df2 ring_buffer: Fix more races when terminating the producer in the benchmark
The commit b44754d826 ("ring_buffer: Allow to exit the ring
buffer benchmark immediately") added a hack into ring_buffer_producer()
that set @kill_test when kthread_should_stop() returned true. It improved
the situation a lot. It stopped the kthread in most cases because
the producer spent most of the time in the patched while cycle.

But there are still few possible races when kthread_should_stop()
is set outside of the cycle. Then we do not set @kill_test and
some other checks pass.

This patch adds a better fix. It renames @test_kill/TEST_KILL() into
a better descriptive @test_error/TEST_ERROR(). Also it introduces
break_test() function that checks for both @test_error and
kthread_should_stop().

The new function is used in the producer when the check for @test_error
is not enough. It is not used in the consumer because its state
is manipulated by the producer via the "reader_finish" variable.

Also we add a missing check into ring_buffer_producer_thread()
between setting TASK_INTERRUPTIBLE and calling schedule_timeout().
Otherwise, we might miss a wakeup from kthread_stop().

Link: http://lkml.kernel.org/r/1441629518-32712-3-git-send-email-pmladek@suse.com

Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-03 16:03:45 -05:00
Petr Mladek
8b46ff6938 ring_buffer: Do no not complete benchmark reader too early
It seems that complete(&read_done) might be called too early
in some situations.

1st scenario:
-------------

CPU0					CPU1

ring_buffer_producer_thread()
  wake_up_process(consumer);
  wait_for_completion(&read_start);

					ring_buffer_consumer_thread()
					  complete(&read_start);

  ring_buffer_producer()
    # producing data in
    # the do-while cycle

					  ring_buffer_consumer();
					    # reading data
					    # got error
					    # set kill_test = 1;
					    set_current_state(
						TASK_INTERRUPTIBLE);
					    if (reader_finish)  # false
					    schedule();

    # producer still in the middle of
    # do-while cycle
    if (consumer && !(cnt % wakeup_interval))
      wake_up_process(consumer);

					    # spurious wakeup
					    while (!reader_finish &&
						   !kill_test)
					    # leaving because
					    # kill_test == 1
					    reader_finish = 0;
					    complete(&read_done);

1st BANG: We might access uninitialized "read_done" if this is the
	  the first round.

    # producer finally leaving
    # the do-while cycle because kill_test == 1;

    if (consumer) {
      reader_finish = 1;
      wake_up_process(consumer);
      wait_for_completion(&read_done);

2nd BANG: This will never complete because consumer already did
	  the completion.

2nd scenario:
-------------

CPU0					CPU1

ring_buffer_producer_thread()
  wake_up_process(consumer);
  wait_for_completion(&read_start);

					ring_buffer_consumer_thread()
					  complete(&read_start);

  ring_buffer_producer()
    # CPU3 removes the module	  <--- difference from
    # and stops producer          <--- the 1st scenario
    if (kthread_should_stop())
      kill_test = 1;

					  ring_buffer_consumer();
					    while (!reader_finish &&
						   !kill_test)
					    # kill_test == 1 => we never go
					    # into the top level while()
					    reader_finish = 0;
					    complete(&read_done);

    # producer still in the middle of
    # do-while cycle
    if (consumer && !(cnt % wakeup_interval))
      wake_up_process(consumer);

					    # spurious wakeup
					    while (!reader_finish &&
						   !kill_test)
					    # leaving because kill_test == 1
					    reader_finish = 0;
					    complete(&read_done);

BANG: We are in the same "bang" situations as in the 1st scenario.

Root of the problem:
--------------------

ring_buffer_consumer() must complete "read_done" only when "reader_finish"
variable is set. It must not be skipped due to other conditions.

Note that we still must keep the check for "reader_finish" in a loop
because there might be spurious wakeups as described in the
above scenarios.

Solution:
----------

The top level cycle in ring_buffer_consumer() will finish only when
"reader_finish" is set. The data will be read in "while-do" cycle
so that they are not read after an error (kill_test == 1)
or a spurious wake up.

In addition, "reader_finish" is manipulated by the producer thread.
Therefore we add READ_ONCE() to make sure that the fresh value is
read in each cycle. Also we add the corresponding barrier
to synchronize the sleep check.

Next we set the state back to TASK_RUNNING for the situation where we
did not sleep.

Just from paranoid reasons, we initialize both completions statically.
This is safer, in case there are other races that we are unaware of.

As a side effect we could remove the memory barrier from
ring_buffer_producer_thread(). IMHO, this was the reason for
the barrier. ring_buffer_reset() uses spin locks that should
provide the needed memory barrier for using the buffer.

Link: http://lkml.kernel.org/r/1441629518-32712-2-git-send-email-pmladek@suse.com

Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-03 16:03:24 -05:00
Dmitry Safonov
fb8c2293e1 tracing: Remove redundant TP_ARGS redefining
TP_ARGS is not used anywhere in trace.h nor trace_entries.h
Firstly, I left just #undef TP_ARGS and had no errors - remove it.

Link: http://lkml.kernel.org/r/1446576560-14085-1-git-send-email-0x7f454c46@gmail.com

Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-03 15:07:07 -05:00
Steven Rostedt (Red Hat)
d332736df0 tracing: Rename max_stack_lock to stack_trace_max_lock
Now that max_stack_lock is a global variable, it requires a naming
convention that is unlikely to collide. Rename it to the same naming
convention that the other stack_trace variables have.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-03 14:50:15 -05:00
AKASHI Takahiro
bb99d8ccec tracing: Allow arch-specific stack tracer
A stack frame may be used in a different way depending on cpu architecture.
Thus it is not always appropriate to slurp the stack contents, as current
check_stack() does, in order to calcurate a stack index (height) at a given
function call. At least not on arm64.
In addition, there is a possibility that we will mistakenly detect a stale
stack frame which has not been overwritten.

This patch makes check_stack() a weak function so as to later implement
arch-specific version.

Link: http://lkml.kernel.org/r/1446182741-31019-5-git-send-email-takahiro.akashi@linaro.org

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-03 14:31:06 -05:00
Yaowei Bai
c6650b2e57 tracing: ftrace_event_is_function() can return boolean
Make ftrace_event_is_function() return bool to improve readability
due to this particular function only using either one or zero as its
return value.

No functional change.

Link: http://lkml.kernel.org/r/1443537816-5788-9-git-send-email-bywxiaobai@163.com

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-02 14:28:05 -05:00
Yaowei Bai
907bff917a tracing: is_legal_op() can return boolean
Make is_legal_op() return bool to improve readability due to this particular
function only using either one or zero as its return value.

No functional change.

Link: http://lkml.kernel.org/r/1443537816-5788-8-git-send-email-bywxiaobai@163.com

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-02 14:26:51 -05:00
Yaowei Bai
cdb2a0a915 ring-buffer: rb_event_is_commit() can return boolean
Make rb_event_is_commit() return bool to improve readability
due to this particular function only using either one or zero as its
return value.

No functional change.

Link: http://lkml.kernel.org/r/1443537816-5788-7-git-send-email-bywxiaobai@163.com

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-02 14:25:29 -05:00
Yaowei Bai
da58834cf2 ring-buffer: rb_per_cpu_empty() can return boolean
Makes rb_per_cpu_empty() return bool to improve readability.

No functional change.

Link: http://lkml.kernel.org/r/1443537816-5788-6-git-send-email-bywxiaobai@163.com

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-02 14:24:27 -05:00
Yaowei Bai
3d4e204d81 ring_buffer: ring_buffer_empty{cpu}() can return boolean
Make ring_buffer_empty() and ring_buffer_empty_cpu() return bool.

No functional change.

Link: http://lkml.kernel.org/r/1443537816-5788-5-git-send-email-bywxiaobai@163.com

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-02 14:23:38 -05:00
Yaowei Bai
06ca320952 ring-buffer: rb_is_reader_page() can return boolean
Make rb_is_reader_page() return bool to improve readability due to this
particular function only using either true or false as its return value.

No functional change.

Link: http://lkml.kernel.org/r/1443537816-5788-4-git-send-email-bywxiaobai@163.com

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-02 14:23:20 -05:00
Yaowei Bai
79851821b2 tracing: report_latency() in trace_irqsoff.c can return boolean
This patch makes report_latency return bool due to this
particular function only using either one or zero as its
return value.

No functional change.

Link: http://lkml.kernel.org/r/1443537816-5788-3-git-send-email-bywxiaobai@163.com

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-02 14:20:19 -05:00
Yaowei Bai
26ab2ef451 tracing: report_latency() in trace_sched_wakeup.c can return boolean
This patch makes report_latency return bool to improve readability,
indicating whether this new latency should be reported/recorded.

No functional change.

Link: http://lkml.kernel.org/r/1443537816-5788-2-git-send-email-bywxiaobai@163.com

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-02 14:20:06 -05:00
Jiaxing Wang
681a4a2f45 tracing: Update instance_rmdir() to use tracefs_remove_recursive
Update instancd_rmdir to use tracefs_remove_recursive instead of
debugfs_remove_recursive.This was left in the transition from debugfs
to tracefs.

Link: http://lkml.kernel.org/r/1445169490-18315-2-git-send-email-hello.wjx@gmail.com

Cc: stable@vger.kernel.org # 4.1+
Fixes: 8434dc9340 ("tracing: Convert the tracing facility over to use tracefs")
Signed-off-by: Jiaxing Wang <hello.wjx@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-02 13:59:06 -05:00
Chunyan Zhang
bdb5d0f904 tracing: Only benchmark the time tracepoints take if tracing is on
There's no need to record the time tracepoints take when tracing is off.
This is because:
1) We cannot see these records since ring_buffer record is off at that
moment.
2) If tracing is off and benchmark tracepoint is enabled, the time
tracepoint takes is fewer than the same situation when tracing is on,
since the tracepoints need to be wrote into ring_buffer, it would
take more time. If turn on tracing at this moment, the average and
standard deviation cannot exactly present the time that tracepoints
take to write data into ring_buffer.

Link: http://lkml.kernel.org/r/1445947933-27955-1-git-send-email-zhang.chunyan@linaro.org

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-02 13:34:58 -05:00
Steven Rostedt (Red Hat)
799fd44cf5 tracing: Call on_each_cpu() when adding or removing single pids from set_event_pid
For the case where pids are already in set_event_pid, and one is added or
removed then each CPU should be checked to make sure that the new or old pid
is on or not on a CPU.

 For example:

 # echo 123 >> set_event_pid

or

 # echo '!123' >> set_event_pid

Link: http://lkml.kernel.org/r/20151030061643.GA19480@cac

Suggested-by: Jiaxing Wang <hello.wjx@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-02 13:08:26 -05:00
David S. Miller
b75ec3af27 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2015-11-01 00:15:30 -04:00
Davidlohr Bueso
cdea01b2bf blktrace: re-write setting q->blk_trace
This is really about simplifying the double xchg patterns into
a single cmpxchg, with the same logic. Other than the immediate
cleanup, there are some subtleties this change deals with:

(i) While the load of the old bt is fully ordered wrt everything,
ie:

        old_bt = xchg(&q->blk_trace, bt);             [barrier]
        if (old_bt)
	     (void) xchg(&q->blk_trace, old_bt);    [barrier]

blk_trace could still be changed between the xchg and the old_bt
load. Note that this description is merely theoretical and afaict
very small, but doing everything in a single context with cmpxchg
closes this potential race.

(ii) Ordering guarantees are obviously kept with cmpxchg.

(iii) Gets rid of the hacky-by-nature (void)xchg pattern.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
eviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-30 05:25:59 +09:00
Alexei Starovoitov
1075ef5950 bpf: make tracing helpers gpl only
exported perf symbols are GPL only, mark eBPF helper functions
used in tracing as GPL only as well.

Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 21:53:34 -07:00
Alexei Starovoitov
62544ce8e0 bpf: fix bpf_perf_event_read() helper
Fix safety checks for bpf_perf_event_read():
- only non-inherited events can be added to perf_event_array map
  (do this check statically at map insertion time)
- dynamically check that event is local and !pmu->count
Otherwise buggy bpf program can cause kernel splat.

Also fix error path after perf_event_attrs()
and remove redundant 'extern'.

Fixes: 35578d7984 ("bpf: Implement function bpf_perf_event_read() that get the selected hardware PMU conuter")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 21:49:26 -07:00
Steven Rostedt (Red Hat)
fb66228828 tracing: Fix sparse RCU warning
p_start() and p_stop() are seq_file functions that match. Teach sparse to
know that rcu_read_lock_sched() that is taken by p_start() is released by
p_stop.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-10-26 03:51:32 -04:00
Steven Rostedt (Red Hat)
8ca532ad2b tracing: Check all tasks on each CPU when filtering pids
My tests found that if a task is running but not filtered when set_event_pid
is modified, then it can still be traced.

Call on_each_cpu() to check if the current running task should be filtered
and update the per cpu flags of tr->data appropriately.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-10-25 21:33:56 -04:00
Steven Rostedt (Red Hat)
3fdaf80f4a tracing: Implement event pid filtering
Add the necessary hooks to use the pids loaded in set_event_pid to filter
all the events enabled in the tracing instance that match the pids listed.

Two probes are added to both sched_switch and sched_wakeup tracepoints to be
called before other probes are called and after the other probes are called.
The first is used to set the necessary flags to let the probes know to test
if they should be traced or not.

The sched_switch pre probe will set the "ignore_pid" flag if neither the
previous or next task has a matching pid.

The sched_switch probe will set the "ignore_pid" flag if the next task
does not match the matching pid.

The pre probe allows for probes tracing sched_switch to be traced if
necessary.

The sched_wakeup pre probe will set the "ignore_pid" flag if neither the
current task nor the wakee task has a matching pid.

The sched_wakeup post probe will set the "ignore_pid" flag if the current
task does not have a matching pid.

Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-10-25 21:33:56 -04:00
Steven Rostedt (Red Hat)
4909010788 tracing: Add set_event_pid directory for future use
Create a tracing directory called set_event_pid, which currently has no
function, but will be used to filter all events for the tracing instance or
the pids that are added to the file.

The reason no functionality is added with this commit is that this commit
focuses on the creation and removal of the pids in a safe manner. And tests
can be made against this change to make sure things are correct before
hooking features to the list of pids.

Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-10-25 21:33:55 -04:00
Alexei Starovoitov
a43eec3042 bpf: introduce bpf_perf_event_output() helper
This helper is used to send raw data from eBPF program into
special PERF_TYPE_SOFTWARE/PERF_COUNT_SW_BPF_OUTPUT perf_event.
User space needs to perf_event_open() it (either for one or all cpus) and
store FD into perf_event_array (similar to bpf_perf_event_read() helper)
before eBPF program can send data into it.

Today the programs triggered by kprobe collect the data and either store
it into the maps or print it via bpf_trace_printk() where latter is the debug
facility and not suitable to stream the data. This new helper replaces
such bpf_trace_printk() usage and allows programs to have dedicated
channel into user space for post-processing of the raw data collected.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22 06:42:15 -07:00
Dmitry Safonov
3061692921 tracing: Remove {start,stop}_branch_trace
Both start_branch_trace() and stop_branch_trace() are used in only one
location, and are both static. As they are small functions there is no
need to keep them separated out.

Link: http://lkml.kernel.org/r/1445000689-32596-1-git-send-email-0x7f454c46@gmail.com

Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-10-21 10:10:09 -04:00
Tal Shorer
ddd70280bf tracing: gpio: Add Kconfig option for enabling/disabling trace events
Add a new options to trace Kconfig, CONFIG_TRACING_EVENTS_GPIO, that is
used for enabling/disabling compilation of gpio function trace events.

Link: http://lkml.kernel.org/r/1438432079-11704-4-git-send-email-tal.shorer@gmail.com

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tal Shorer <tal.shorer@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-10-20 21:56:10 -04:00
Steven Rostedt (Red Hat)
1904be1b6b tracing: Do not allow stack_tracer to record stack in NMI
The code in stack tracer should not be executed within an NMI as it grabs
spinlocks and stack tracing an NMI gives the possibility of causing a
deadlock. Although this is safe on x86_64, because it does not perform stack
traces when the task struct stack is not in use (interrupts and NMIs), it
may be an issue for NMIs on i386 and other archs that use the same stack as
the NMI.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-10-20 21:52:23 -04:00
Dmitry Safonov
0b507e1ed1 ftrace: add module globbing
Extend module command for function filter selection with globbing.
It uses the same globbing as function filter.

  sh# echo '*alloc*:mod:*' > set_ftrace_filter

Will trace any function with the letters 'alloc' in the name in any
module but not in kernel.

  sh# echo '!*alloc*:mod:ipv6' >> set_ftrace_filter

Will prevent from tracing functions with 'alloc' in the name from module
ipv6 (do not forget to append to set_ftrace_filter file).

  sh# echo '*alloc*:mod:!ipv6' > set_ftrace_filter

Will trace functions with 'alloc' in the name from kernel and any
module except ipv6.

  sh# echo '*alloc*:mod:!*' > set_ftrace_filter

Will trace any function with the letters 'alloc' in the name only from
kernel, but not from any module.

  sh# echo '*:mod:!*' > set_ftrace_filter
or
  sh# echo ':mod:!' > set_ftrace_filter

Will trace every function in the kernel, but will not trace functions
from any module.

  sh# echo '*:mod:*' > set_ftrace_filter
or
  sh# echo ':mod:' > set_ftrace_filter

As the opposite will trace all functions from all modules, but not from
kernel.

  sh# echo '*:mod:*snd*' > set_ftrace_filter

Will trace your sound drivers only (if any).

Link: http://lkml.kernel.org/r/1443545176-3215-4-git-send-email-0x7f454c46@gmail.com

Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
[ Made format changes ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-10-20 20:02:03 -04:00
Dmitry Safonov
3ba0092971 ftrace: Introduce ftrace_glob structure
ftrace_match parameters are very related and I reduce the number of local
variables & parameters with it.
This is also preparation for module globbing as it would introduce more
realated variables & parameters.

Link: http://lkml.kernel.org/r/1443545176-3215-3-git-send-email-0x7f454c46@gmail.com

Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
[ Made some formatting changes ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-10-20 18:23:07 -04:00
Steven Rostedt (Red Hat)
a2d7629048 tracing: Have stack tracer force RCU to be watching
The stack tracer was triggering the WARN_ON() in module.c:

 static void module_assert_mutex_or_preempt(void)
 {
 #ifdef CONFIG_LOCKDEP
	if (unlikely(!debug_locks))
		return;

	WARN_ON(!rcu_read_lock_sched_held() &&
		!lockdep_is_held(&module_mutex));
 #endif
 }

The reason is that the stack tracer traces all function calls, and some of
those calls happen while exiting or entering user space and idle. Some of
these functions are called after RCU had already stopped watching, as RCU
does not watch userspace or idle CPUs.

If a max stack is hit, then the save_stack_trace() is called, which will
check module addresses and call module_assert_mutex_or_preempt(), and then
trigger the warning. Sad part is, the warning itself will also do a stack
trace and tigger the same warning. That probably should be fixed.

The warning was added by 0be964be0d "module: Sanitize RCU usage and
locking" but this bug has probably been around longer. But it's unlikely to
cause much harm, but the new warning causes the system to lock up.

Cc: stable@vger.kernel.org # 4.2+
Cc: Peter Zijlstra <peterz@infradead.org>
Cc:"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-10-20 11:38:08 -04:00
Dmitry Safonov
f0a3b154bd ftrace: Clarify code for mod command
"Not" is too abstract variable name - changed to clear_filter.
Removed ftrace_match_module_records function: comparison with !* or *
not does the general code in filter_parse_regex() as it works without
mod command for
  sh# echo '!*' > /sys/kernel/debug/tracing/set_ftrace_filter

Link: http://lkml.kernel.org/r/1443545176-3215-2-git-send-email-0x7f454c46@gmail.com

Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-10-16 10:29:53 -04:00
Dmitry Safonov
5e3949f0ac ftrace: Remove redundant strsep in mod_callback
By now there isn't any subcommand for mod.

Before:
	sh$ echo '*:mod:ipv6:a' > set_ftrace_filter
	sh$ echo '*:mod:ipv6' > set_ftrace_filter
had the same results, but now first will result in:
	sh$ echo '*:mod:ipv6:a' > set_ftrace_filter
	-bash: echo: write error: Invalid argument

Also, I clarified ftrace_mod_callback code a little.

Link: http://lkml.kernel.org/r/1443545176-3215-1-git-send-email-0x7f454c46@gmail.com

Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
[ converted 'if (ret == 0)' to 'if (!ret)' ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-10-13 20:59:24 -04:00