Currently the regulatory driver does not call the regulatory callback
reg_notifier for self managed wiphys. Sometimes driver needs cfg80211
to calculate the info of ieee80211_channel such as flags and power,
and driver needs to get the info of ieee80211_channel after hint of
driver, but driver does not know when calculation of the info of
ieee80211_channel become finished, so add notify to driver in
reg_process_self_managed_hint() from cfg80211 is a good way, then
driver could get the correct info in callback of reg_notifier.
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230201065313.27203-1-quic_wgong@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
At least ath10k and ath11k supported hardware (maybe more) does not implement
mesh A-MSDU aggregation in a standard compliant way.
802.11-2020 9.3.2.2.2 declares that the Mesh Control field is part of the
A-MSDU header (and little-endian).
As such, its length must not be included in the subframe length field.
Hardware affected by this bug treats the mesh control field as part of the
MSDU data and sets the length accordingly.
In order to avoid packet loss, keep track of which stations are affected
by this and take it into account when converting A-MSDU to 802.3 + mesh control
packets.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230213100855.34315-5-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The current mac80211 mesh A-MSDU receive path fails to parse A-MSDU packets
on mesh interfaces, because it assumes that the Mesh Control field is always
directly after the 802.11 header.
802.11-2020 9.3.2.2.2 Figure 9-70 shows that the Mesh Control field is
actually part of the A-MSDU subframe header.
This makes more sense, since it allows packets for multiple different
destinations to be included in the same A-MSDU, as long as RA and TID are
still the same.
Another issue is the fact that the A-MSDU subframe length field was apparently
accidentally defined as little-endian in the standard.
In order to fix this, the mesh forwarding path needs happen at a different
point in the receive path.
ieee80211_data_to_8023_exthdr is changed to ignore the mesh control field
and leave it in after the ethernet header. This also affects the source/dest
MAC address fields, which now in the case of mesh point to the mesh SA/DA.
ieee80211_amsdu_to_8023s is changed to deal with the endian difference and
to add the Mesh Control length to the subframe length, since it's not covered
by the MSDU length field.
With these changes, the mac80211 will get the same packet structure for
converted regular data packets and unpacked A-MSDU subframes.
The mesh forwarding checks are now only performed after the A-MSDU decap.
For locally received packets, the Mesh Control header is stripped away.
For forwarded packets, a new 802.11 header gets added.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230213100855.34315-4-nbd@nbd.name
[fix fortify build error]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- New feature flag, NL80211_EXT_FEATURE_PUNCT, to advertise
driver support for preamble puncturing in AP mode.
- New attribute, NL80211_ATTR_PUNCT_BITMAP, to receive a puncturing
bitmap from the userspace during AP bring up (NL80211_CMD_START_AP)
and channel switch (NL80211_CMD_CHANNEL_SWITCH) operations. Each bit
corresponds to a 20 MHz channel in the operating bandwidth, lowest
bit for the lowest channel. Bit set to 1 indicates that the channel
is punctured. Higher 16 bits are reserved.
- New members added to structures cfg80211_ap_settings and
cfg80211_csa_settings to propagate the bitmap to the driver after
validation.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
Link: https://lore.kernel.org/r/20230131001227.25014-3-quic_alokad@quicinc.com
[move validation against 0xffff into policy]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- Move ieee80211_valid_disable_subchannel_bitmap() from mlme.c to
chan.c, rename it as cfg80211_valid_disable_subchannel_bitmap()
and export it.
- Modify the prototype to include struct cfg80211_chan_def instead
of only bandwidth to support a check which returns false if the
primary channel is punctured.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://lore.kernel.org/r/20230131001227.25014-2-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support to offload OWE processing to user space for MLD AP when
driver's SME in use.
Add new parameters in struct cfg80211_update_owe_info to provide below
information in cfg80211_update_owe_info_event() call:
- MLO link ID of the AP, with which station requested (re)association.
This is applicable for both MLO and non-MLO station connections when
the AP affiliated with an MLD.
- Station's MLD address if the connection is MLO capable.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20230126143256.960563-3-quic_vjakkam@quicinc.com
[reformat the trace event macro]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for drivers to indicate STA connection(MLO/non-MLO) when
user space SME (e.g., hostapd) is not used for MLD AP.
Add new parameters in struct station_info to provide below information
in cfg80211_new_sta() call:
- MLO link ID of the AP, with which station completed (re)association.
This is applicable for both MLO and non-MLO station connections when
the AP affiliated with an MLD.
- Station's MLD address if the connection is MLO capable.
- (Re)Association Response IEs sent to the station. User space needs
this to determine rejected and accepted affiliated links information
of the connected station if the connection is MLO capable.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20230126143256.960563-2-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently authentication request event interface doesn't have support to
indicate the user space whether it should enable MLO or not during the
authentication with the specified AP. But driver needs such capability
since the connection is MLO or not decided by the driver in case of SME
offload to the driver.
Add support for driver to indicate MLD address of the AP in
authentication offload request to inform user space to enable MLO during
authentication process. Driver shall look at NL80211_ATTR_MLO_SUPPORT
flag capability in NL80211_CMD_CONNECT to know whether the user space
supports enabling MLO during the authentication offload.
User space should enable MLO during the authentication only when it
receives the AP MLD address in authentication offload request. User
space shouldn't enable MLO if the authentication offload request doesn't
indicate the AP MLD address even if the AP is MLO capable.
When MLO is enabled, user space should use the MAC address of the
interface (on which driver sent request) as self MLD address. User space
and driver to use MLD addresses in RA, TA and BSSID fields of the frames
between them, and driver translates the MLD addresses to/from link
addresses based on the link chosen for the authentication.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20230116125058.1604843-1-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We use station's MLD address to report disconnection of MLD station.
Update the documentation in multiple places to indicate this.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20221206080226.1702646-4-quic_vjakkam@quicinc.com
[update commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, maximum KCK key length supported for GTK rekey offload is 24
bytes but with some newer AKMs the KCK key length can be 32 bytes. e.g.,
00-0F-AC:24 AKM suite with SAE finite cyclic group 21. Add support to
allow 32 bytes KCK keys in GTK rekey offload.
Signed-off-by: Shivani Baranwal <quic_shivbara@quicinc.com>
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20221206143715.1802987-3-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit b8676221f0 ("cfg80211: Add support for
static WEP in the driver") since no driver ever ended up using
it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case of 4way handshake offload, transition disable policy
updated by the AP during EAPOL 3/4 is not updated to the upper layer.
This results in mismatch between transition disable policy
between the upper layer and the driver. This patch addresses this
issue by updating transition disable policy as part of port
authorization indication.
Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For assoc and connect result APIs, support reporting
failed links; they should still come with the BSS
pointer in the case of assoc, so they're released
correctly. In the case of connect result, this is
optional.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for various key operations on MLD by adding new parameter
link_id. Pass the link_id received from userspace to driver for add_key,
get_key, del_key, set_default_key, set_default_mgmt_key and
set_default_beacon_key to support configuring keys specific to each MLO
link. Userspace must not specify link ID for MLO pairwise key since it
is common for all the MLO links.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The Tx queue parameters are per link, so add the link ID
from nl80211 parameters to the API.
While at it, lock the wdev when calling into the driver
so it (and we) can check the link ID appropriately.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Allow optionally specifying the link ID to transmit on,
which can be done instead of the link frequency, on an
MLD addressed frame. Both can also be omitted in which
case the frame must be MLD addressed and link selection
(and address translation) will be done on lower layers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add hardware timestamps to management frame RX info.
This shall be used by drivers that support hardware timestamping for
Timing measurement and Fine timing measurement action frames RX.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The functions for reporting rx management take many arguments.
Collect all the arguments into a struct, which also make it easier
to add more arguments if needed.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a function for reporting TX status with hardware timestamps. This
function shall be used for reporting the TX status of Timing
measurement and Fine timing measurement action frames by devices that
support reporting hardware timestamps.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a helper function cfg80211_get_iftype_ext_capa() to
look up interface type-specific (extended) capabilities.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case of authentication with a legacy station, link addressed EAPOL
frames should be sent. Support it.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have the per-interface type capabilities, currently for
extended capabilities, add the EML/MLD capabilities there
to have this advertised by the driver.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Extend the cfg80211_rx_assoc_resp() to cover multiple
BSSes, the AP MLD address and local link addresses
for MLO.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For MLO we'll need a lot more arguments, including all the
BSS pointers and link addresses, so move the data to a struct
to be able to extend it more easily later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We only report the BSSID to userspace, so change the
argument from BSS struct pointer to AP address, which
we'll use to carry either the BSSID or AP MLD address.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For MLO, we need the ability to report back multiple BSS
structures to release, as well as the AP MLD address (if
attempting to make an MLO connection).
Unify cfg80211_assoc_timeout() and cfg80211_abandon_assoc()
into a new cfg80211_assoc_failure() that gets a structure
parameter with the necessary data.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The race described by the comment in mac80211 hasn't existed
since the locking rework to use the same lock and for MLO we
need to pass the AP MLD address, so just pass the BSSID or
AP MLD address instead of the BSS struct pointer, and adjust
all the code accordingly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We might assign -1 to it in some cases when key is NULL,
which means the key_idx isn't used but can lead to a
warning from static checkers such as smatch.
Make the struct member signed simply to avoid that, we
only need a range of -1..3 anyway.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Put the link_station_parameters structure in the station_parameters
structure (and remove the station_parameters fields already existing
in link_station_parameters).
Now, for an MLD station, the default link is added together with
the station.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add an API for adding/modifying/removing a link of a station.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support to retrieve EHT capabilities and EHT operation elements
passed by the userspace in the beacon template and store the pointers
in struct cfg80211_ap_settings to be used by the drivers.
Co-developed-by: Vikram Kandukuri <quic_vikram@quicinc.com>
Signed-off-by: Vikram Kandukuri <quic_vikram@quicinc.com>
Co-developed-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://lore.kernel.org/r/20220523064904.28523-1-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Increase akm_suites array size in struct cfg80211_crypto_settings to 10
and advertise the capability to userspace. This allows userspace to send
more than two AKMs to driver in netlink commands such as
NL80211_CMD_CONNECT.
This capability is needed for implementing WPA3-Personal transition mode
correctly with any driver that handles roaming internally. Currently,
the possible AKMs for multi-AKM connect can include PSK, PSK-SHA-256,
SAE, FT-PSK and FT-SAE. Since the count is already 5, increasing
the akm_suites array size to 10 should be reasonable for future
usecases.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/1653312358-12321-1-git-send-email-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are currently 17 kernel-doc warnings on this file:
include/net/cfg80211.h:391: warning: Function parameter or member 'bw' not described in 'ieee80211_eht_mcs_nss_supp'
include/net/cfg80211.h:437: warning: Function parameter or member 'eht_cap' not described in 'ieee80211_sband_iftype_data'
include/net/cfg80211.h:507: warning: Function parameter or member 's1g' not described in 'ieee80211_sta_s1g_cap'
include/net/cfg80211.h:1390: warning: Function parameter or member 'counter_offset_beacon' not described in 'cfg80211_color_change_settings'
include/net/cfg80211.h:1390: warning: Function parameter or member 'counter_offset_presp' not described in 'cfg80211_color_change_settings'
include/net/cfg80211.h:1430: warning: Enum value 'STATION_PARAM_APPLY_STA_TXPOWER' not described in enum 'station_parameters_apply_mask'
include/net/cfg80211.h:2195: warning: Function parameter or member 'dot11MeshConnectedToAuthServer' not described in 'mesh_config'
include/net/cfg80211.h:2341: warning: Function parameter or member 'short_ssid' not described in 'cfg80211_scan_6ghz_params'
include/net/cfg80211.h:3328: warning: Function parameter or member 'kck_len' not described in 'cfg80211_gtk_rekey_data'
include/net/cfg80211.h:3698: warning: Function parameter or member 'ftm' not described in 'cfg80211_pmsr_result'
include/net/cfg80211.h:3828: warning: Function parameter or member 'global_mcast_stypes' not described in 'mgmt_frame_regs'
include/net/cfg80211.h:4977: warning: Function parameter or member 'ftm' not described in 'cfg80211_pmsr_capabilities'
include/net/cfg80211.h:5742: warning: Function parameter or member 'u' not described in 'wireless_dev'
include/net/cfg80211.h:5742: warning: Function parameter or member 'links' not described in 'wireless_dev'
include/net/cfg80211.h:5742: warning: Function parameter or member 'valid_links' not described in 'wireless_dev'
include/net/cfg80211.h:6076: warning: Function parameter or member 'is_amsdu' not described in 'ieee80211_data_to_8023_exthdr'
include/net/cfg80211.h:6949: warning: Function parameter or member 'sig_dbm' not described in 'cfg80211_notify_new_peer_candidate'
Address them, in order to build a better documentation from this
header.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/f6f522cdc716a01744bb0eae2186f4592976222b.1656409369.git.mchehab@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce the capability to specify gfp_t parameter to
ieeee80211_obss_color_collision_notify routine since it runs in
interrupt context in ieee80211_rx_check_bss_color_collision().
Fixes: 6d945a33f2 ("mac80211: introduce BSS color collision detection")
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/02c990fb3fbd929c8548a656477d20d6c0427a13.1655419135.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The MLO links used for connection with an MLD AP are decided by the
driver in case of SME offloaded to driver.
Add support for the drivers to indicate the information of links used
for MLO connection in connect and roam callbacks, update the connected
links information in wdev from connect/roam result sent by driver.
Also, send the connected links information to userspace.
Add a netlink flag attribute to indicate that userspace supports
handling of MLO connection. Drivers must not do MLO connection when this
flag is not set. This is to maintain backwards compatibility with older
supplicant versions which doesn't have support for MLO connection.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add some optional callbacks for link add/remove so that
drivers can react here. Initially, I thought it would be
sufficient to just create the link in start_ap etc., but
it turns out that's not so simple, since there are quite
a few callbacks that can be called: if they're erroneously
without start_ap, things might crash.
Thus it might be easier for drivers to allocate all the
necessary data structures immediately, to not have to
worry about it in each callback, since cfg80211 checks
that the link ID is valid (has been added.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For authentication, we need the BSS, the link_id and the AP
MLD address to create the link and station, (for now) the
driver assigns a link address and sends the frame, the MLD
address needs to be the address of the interface.
For association, pass the list of BSSes that were selected
for the MLO connection, along with extra per-STA profile
elements, the AP MLD address and the link ID on which the
association request should be sent.
Note that for now we don't have a proper way to pass the link
address(es) and so the driver/mac80211 will select one, but
depending on how that selection works it means that assoc w/o
auth data still being around (mac80211 implementation detail)
the association won't necessarily work - so this will need to
be extended in the future to sort out the link addressing.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to support multi-link operation with multiple links,
start adding some APIs. The notable addition here is to have
the link ID in a new nl80211 attribute, that will be used to
differentiate the links in many nl80211 operations.
So far, this patch adds the netlink NL80211_ATTR_MLO_LINK_ID
attribute (as well as the NL80211_ATTR_MLO_LINKS attribute)
and plugs it through the system in some places, checking the
validity etc. along with other infrastructure needed for it.
For now, I've decided to include only the over-the-air link
ID in the API. I know we discussed that we eventually need to
have to have other ways of identifying a link, but for local
AP mode and auth/assoc commands as well as set_key etc. we'll
use the OTA ID.
Also included in this patch is some refactoring of the data
structures in struct wireless_dev, splitting for the first
time the data into type dependent pieces, to make reasoning
about these things easier.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Most protocol-specific pointers in struct net_device are under
a respective ifdef. Wireless is the notable exception. Since
there's a sizable number of custom-built kernels for datacenter
workloads which don't build wireless it seems reasonable to
ifdefy those pointers as well.
While at it move IPv4 and IPv6 pointers up, those are special
for obvious reasons.
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> # ieee802154
Acked-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel-doc comment is formatted badly, resulting
in a warning:
include/net/cfg80211.h:1188: warning: bad line: [...]
Fix that.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
