mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-03 17:40:04 +00:00
17 commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
![]() |
b261eda84e |
soreuseport: Fix socket selection for SO_INCOMING_CPU.
Kazuho Oku reported that setsockopt(SO_INCOMING_CPU) does not work with setsockopt(SO_REUSEPORT) since v4.6. With the combination of SO_REUSEPORT and SO_INCOMING_CPU, we could build a highly efficient server application. setsockopt(SO_INCOMING_CPU) associates a CPU with a TCP listener or UDP socket, and then incoming packets processed on the CPU will likely be distributed to the socket. Technically, a socket could even receive packets handled on another CPU if no sockets in the reuseport group have the same CPU receiving the flow. The logic exists in compute_score() so that a socket will get a higher score if it has the same CPU with the flow. However, the score gets ignored after the blamed two commits, which introduced a faster socket selection algorithm for SO_REUSEPORT. This patch introduces a counter of sockets with SO_INCOMING_CPU in a reuseport group to check if we should iterate all sockets to find a proper one. We increment the counter when * calling listen() if the socket has SO_INCOMING_CPU and SO_REUSEPORT * enabling SO_INCOMING_CPU if the socket is in a reuseport group Also, we decrement it when * detaching a socket out of the group to apply SO_INCOMING_CPU to migrated TCP requests * disabling SO_INCOMING_CPU if the socket is in a reuseport group When the counter reaches 0, we can get back to the O(1) selection algorithm. The overall changes are negligible for the non-SO_INCOMING_CPU case, and the only notable thing is that we have to update sk_incomnig_cpu under reuseport_lock. Otherwise, the race prevents transitioning to the O(n) algorithm and results in the wrong socket selection. cpu1 (setsockopt) cpu2 (listen) +-----------------+ +-------------+ lock_sock(sk1) lock_sock(sk2) reuseport_update_incoming_cpu(sk1, val) . | /* set CPU as 0 */ |- WRITE_ONCE(sk1->incoming_cpu, val) | | spin_lock_bh(&reuseport_lock) | reuseport_grow(sk2, reuse) | . | |- more_socks_size = reuse->max_socks * 2U; | |- if (more_socks_size > U16_MAX && | | reuse->num_closed_socks) | | . | | |- RCU_INIT_POINTER(sk1->sk_reuseport_cb, NULL); | | `- __reuseport_detach_closed_sock(sk1, reuse) | | . | | `- reuseport_put_incoming_cpu(sk1, reuse) | | . | | | /* Read shutdown()ed sk1's sk_incoming_cpu | | | * without lock_sock(). | | | */ | | `- if (sk1->sk_incoming_cpu >= 0) | | . | | | /* decrement not-yet-incremented | | | * count, which is never incremented. | | | */ | | `- __reuseport_put_incoming_cpu(reuse); | | | `- spin_lock_bh(&reuseport_lock) | |- spin_lock_bh(&reuseport_lock) | |- reuse = rcu_dereference_protected(sk1->sk_reuseport_cb, ...) |- if (!reuse) | . | | /* Cannot increment reuse->incoming_cpu. */ | `- goto out; | `- spin_unlock_bh(&reuseport_lock) Fixes: |
||
![]() |
69421bf984 |
udp: Update reuse->has_conns under reuseport_lock.
When we call connect() for a UDP socket in a reuseport group, we have
to update sk->sk_reuseport_cb->has_conns to 1. Otherwise, the kernel
could select a unconnected socket wrongly for packets sent to the
connected socket.
However, the current way to set has_conns is illegal and possible to
trigger that problem. reuseport_has_conns() changes has_conns under
rcu_read_lock(), which upgrades the RCU reader to the updater. Then,
it must do the update under the updater's lock, reuseport_lock, but
it doesn't for now.
For this reason, there is a race below where we fail to set has_conns
resulting in the wrong socket selection. To avoid the race, let's split
the reader and updater with proper locking.
cpu1 cpu2
+----+ +----+
__ip[46]_datagram_connect() reuseport_grow()
. .
|- reuseport_has_conns(sk, true) |- more_reuse = __reuseport_alloc(more_socks_size)
| . |
| |- rcu_read_lock()
| |- reuse = rcu_dereference(sk->sk_reuseport_cb)
| |
| | | /* reuse->has_conns == 0 here */
| | |- more_reuse->has_conns = reuse->has_conns
| |- reuse->has_conns = 1 | /* more_reuse->has_conns SHOULD BE 1 HERE */
| | |
| | |- rcu_assign_pointer(reuse->socks[i]->sk_reuseport_cb,
| | | more_reuse)
| `- rcu_read_unlock() `- kfree_rcu(reuse, rcu)
|
|- sk->sk_state = TCP_ESTABLISHED
Note the likely(reuse) in reuseport_has_conns_set() is always true,
but we put the test there for ease of review. [0]
For the record, usually, sk_reuseport_cb is changed under lock_sock().
The only exception is reuseport_grow() & TCP reqsk migration case.
1) shutdown() TCP listener, which is moved into the latter part of
reuse->socks[] to migrate reqsk.
2) New listen() overflows reuse->socks[] and call reuseport_grow().
3) reuse->max_socks overflows u16 with the new listener.
4) reuseport_grow() pops the old shutdown()ed listener from the array
and update its sk->sk_reuseport_cb as NULL without lock_sock().
shutdown()ed TCP sk->sk_reuseport_cb can be changed without lock_sock(),
but, reuseport_has_conns_set() is called only for UDP under lock_sock(),
so likely(reuse) never be false in reuseport_has_conns_set().
[0]: https://lore.kernel.org/netdev/CANn89iLja=eQHbsM_Ta2sQF0tOGU8vAGrh_izRuuHjuO1ouUag@mail.gmail.com/
Fixes:
|
||
![]() |
1cd62c2157 |
tcp: Add reuseport_migrate_sock() to select a new listener.
reuseport_migrate_sock() does the same check done in reuseport_listen_stop_sock(). If the reuseport group is capable of migration, reuseport_migrate_sock() selects a new listener by the child socket hash and increments the listener's sk_refcnt beforehand. Thus, if we fail in the migration, we have to decrement it later. We will support migration by eBPF in the later commits. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-5-kuniyu@amazon.co.jp |
||
![]() |
333bb73f62 |
tcp: Keep TCP_CLOSE sockets in the reuseport group.
When we close a listening socket, to migrate its connections to another listener in the same reuseport group, we have to handle two kinds of child sockets. One is that a listening socket has a reference to, and the other is not. The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the accept queue of their listening socket. So we can pop them out and push them into another listener's queue at close() or shutdown() syscalls. On the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the three-way handshake and not in the accept queue. Thus, we cannot access such sockets at close() or shutdown() syscalls. Accordingly, we have to migrate immature sockets after their listening socket has been closed. Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At that time, if we could select a new listener from the same reuseport group, no connection would be aborted. However, we cannot do that because reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to the reuseport group from closed sockets. This patch allows TCP_CLOSE sockets to remain in the reuseport group and access it while any child socket references them. The point is that reuseport_detach_sock() was called twice from inet_unhash() and sk_destruct(). This patch replaces the first reuseport_detach_sock() with reuseport_stop_listen_sock(), which checks if the reuseport group is capable of migration. If capable, it decrements num_socks, moves the socket backwards in socks[] and increments num_closed_socks. When all connections are migrated, sk_destruct() calls reuseport_detach_sock() to remove the socket from socks[], decrement num_closed_socks, and set NULL to sk_reuseport_cb. By this change, closed or shutdowned sockets can keep sk_reuseport_cb. Consequently, calling listen() after shutdown() can cause EADDRINUSE or EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects such sockets not to have the reuseport group. Therefore, this patch also loosens such validation rules so that a socket can listen again if it has a reuseport group with num_closed_socks more than 0. When such sockets listen again, we handle them in reuseport_resurrect(). If there is an existing reuseport group (reuseport_add_sock() path), we move the socket from the old group to the new one and free the old one if necessary. If there is no existing group (reuseport_alloc() path), we allocate a new reuseport group, detach sk from the old one, and free it if necessary, not to break the current shutdown behaviour: - we cannot carry over the eBPF prog of shutdowned sockets - we cannot attach/detach an eBPF prog to/from listening sockets via shutdowned sockets Note that when the number of sockets gets over U16_MAX, we try to detach a closed socket randomly to make room for the new listening socket in reuseport_grow(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp |
||
![]() |
5c040eaf5d |
tcp: Add num_closed_socks to struct sock_reuseport.
As noted in the following commit, a closed listener has to hold the reference to the reuseport group for socket migration. This patch adds a field (num_closed_socks) to struct sock_reuseport to manage closed sockets within the same reuseport group. Moreover, this and the following commits introduce some helper functions to split socks[] into two sections and keep TCP_LISTEN and TCP_CLOSE sockets in each section. Like a double-ended queue, we will place TCP_LISTEN sockets from the front and TCP_CLOSE sockets from the end. TCP_LISTEN----------> <-------TCP_CLOSE +---+---+ --- +---+ --- +---+ --- +---+ | 0 | 1 | ... | i | ... | j | ... | k | +---+---+ --- +---+ --- +---+ --- +---+ i = num_socks - 1 j = max_socks - num_closed_socks k = max_socks - 1 This patch also extends reuseport_add_sock() and reuseport_grow() to support num_closed_socks. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-3-kuniyu@amazon.co.jp |
||
![]() |
2603c29e6c |
net: sock_reuseport: Replace zero-length array with flexible-array member
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit
|
||
![]() |
035ff358f2 |
net: Generate reuseport group ID on group creation
Commit
|
||
![]() |
acdcecc612 |
udp: correct reuseport selection with connected sockets
UDP reuseport groups can hold a mix unconnected and connected sockets.
Ensure that connections only receive all traffic to their 4-tuple.
Fast reuseport returns on the first reuseport match on the assumption
that all matches are equal. Only if connections are present, return to
the previous behavior of scoring all sockets.
Record if connections are present and if so (1) treat such connected
sockets as an independent match from the group, (2) only return
2-tuple matches from reuseport and (3) do not return on the first
2-tuple reuseport match to allow for a higher scoring match later.
New field has_conns is set without locks. No other fields in the
bitmap are modified at runtime and the field is only ever set
unconditionally, so an RMW cannot miss a change.
Fixes:
|
||
![]() |
99f3a064bc |
bpf: net: Add SO_DETACH_REUSEPORT_BPF
There is SO_ATTACH_REUSEPORT_[CE]BPF but there is no DETACH. This patch adds SO_DETACH_REUSEPORT_BPF sockopt. The same sockopt can be used to undo both SO_ATTACH_REUSEPORT_[CE]BPF. reseport_detach_prog() is added and it is mostly a mirror of the existing reuseport_attach_prog(). The differences are, it does not call reuseport_alloc() and returns -ENOENT when there is no old prog. Cc: Craig Gallek <kraig@google.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
![]() |
8217ca653e |
bpf: Enable BPF_PROG_TYPE_SK_REUSEPORT bpf prog in reuseport selection
This patch allows a BPF_PROG_TYPE_SK_REUSEPORT bpf prog to select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY introduced in the earlier patch. "bpf_run_sk_reuseport()" will return -ECONNREFUSED when the BPF_PROG_TYPE_SK_REUSEPORT prog returns SK_DROP. The callers, in inet[6]_hashtable.c and ipv[46]/udp.c, are modified to handle this case and return NULL immediately instead of continuing the sk search from its hashtable. It re-uses the existing SO_ATTACH_REUSEPORT_EBPF setsockopt to attach BPF_PROG_TYPE_SK_REUSEPORT. The "sk_reuseport_attach_bpf()" will check if the attaching bpf prog is in the new SK_REUSEPORT or the existing SOCKET_FILTER type and then check different things accordingly. One level of "__reuseport_attach_prog()" call is removed. The "sk_unhashed() && ..." and "sk->sk_reuseport_cb" tests are pushed back to "reuseport_attach_prog()" in sock_reuseport.c. sock_reuseport.c seems to have more knowledge on those test requirements than filter.c. In "reuseport_attach_prog()", after new_prog is attached to reuse->prog, the old_prog (if any) is also directly freed instead of returning the old_prog to the caller and asking the caller to free. The sysctl_optmem_max check is moved back to the "sk_reuseport_attach_filter()" and "sk_reuseport_attach_bpf()". As of other bpf prog types, the new BPF_PROG_TYPE_SK_REUSEPORT is only bounded by the usual "bpf_prog_charge_memlock()" during load time instead of bounded by both bpf_prog_charge_memlock and sysctl_optmem_max. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
![]() |
2dbb9b9e6d |
bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT
This patch adds a BPF_PROG_TYPE_SK_REUSEPORT which can select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY. Like other non SK_FILTER/CGROUP_SKB program, it requires CAP_SYS_ADMIN. BPF_PROG_TYPE_SK_REUSEPORT introduces "struct sk_reuseport_kern" to store the bpf context instead of using the skb->cb[48]. At the SO_REUSEPORT sk lookup time, it is in the middle of transiting from a lower layer (ipv4/ipv6) to a upper layer (udp/tcp). At this point, it is not always clear where the bpf context can be appended in the skb->cb[48] to avoid saving-and-restoring cb[]. Even putting aside the difference between ipv4-vs-ipv6 and udp-vs-tcp. It is not clear if the lower layer is only ipv4 and ipv6 in the future and will it not touch the cb[] again before transiting to the upper layer. For example, in udp_gro_receive(), it uses the 48 byte NAPI_GRO_CB instead of IP[6]CB and it may still modify the cb[] after calling the udp[46]_lib_lookup_skb(). Because of the above reason, if sk->cb is used for the bpf ctx, saving-and-restoring is needed and likely the whole 48 bytes cb[] has to be saved and restored. Instead of saving, setting and restoring the cb[], this patch opts to create a new "struct sk_reuseport_kern" and setting the needed values in there. The new BPF_PROG_TYPE_SK_REUSEPORT and "struct sk_reuseport_(kern|md)" will serve all ipv4/ipv6 + udp/tcp combinations. There is no protocol specific usage at this point and it is also inline with the current sock_reuseport.c implementation (i.e. no protocol specific requirement). In "struct sk_reuseport_md", this patch exposes data/data_end/len with semantic similar to other existing usages. Together with "bpf_skb_load_bytes()" and "bpf_skb_load_bytes_relative()", the bpf prog can peek anywhere in the skb. The "bind_inany" tells the bpf prog that the reuseport group is bind-ed to a local INANY address which cannot be learned from skb. The new "bind_inany" is added to "struct sock_reuseport" which will be used when running the new "BPF_PROG_TYPE_SK_REUSEPORT" bpf prog in order to avoid repeating the "bind INANY" test on "sk_v6_rcv_saddr/sk->sk_rcv_saddr" every time a bpf prog is run. It can only be properly initialized when a "sk->sk_reuseport" enabled sk is adding to a hashtable (i.e. during "reuseport_alloc()" and "reuseport_add_sock()"). The new "sk_select_reuseport()" is the main helper that the bpf prog will use to select a SO_REUSEPORT sk. It is the only function that can use the new BPF_MAP_TYPE_REUSEPORT_ARRAY. As mentioned in the earlier patch, the validity of a selected sk is checked in run time in "sk_select_reuseport()". Doing the check in verification time is difficult and inflexible (consider the map-in-map use case). The runtime check is to compare the selected sk's reuseport_id with the reuseport_id that we want. This helper will return -EXXX if the selected sk cannot serve the incoming request (e.g. reuseport_id not match). The bpf prog can decide if it wants to do SK_DROP as its discretion. When the bpf prog returns SK_PASS, the kernel will check if a valid sk has been selected (i.e. "reuse_kern->selected_sk != NULL"). If it does , it will use the selected sk. If not, the kernel will select one from "reuse->socks[]" (as before this patch). The SK_DROP and SK_PASS handling logic will be in the next patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
![]() |
736b46027e |
net: Add ID (if needed) to sock_reuseport and expose reuseport_lock
A later patch will introduce a BPF_MAP_TYPE_REUSEPORT_ARRAY which allows a SO_REUSEPORT sk to be added to a bpf map. When a sk is removed from reuse->socks[], it also needs to be removed from the bpf map. Also, when adding a sk to a bpf map, the bpf map needs to ensure it is indeed in a reuse->socks[]. Hence, reuseport_lock is needed by the bpf map to ensure its map_update_elem() and map_delete_elem() operations are in-sync with the reuse->socks[]. The BPF_MAP_TYPE_REUSEPORT_ARRAY map will only acquire the reuseport_lock after ensuring the adding sk is already in a reuseport group (i.e. reuse->socks[]). The map_lookup_elem() will be lockless. This patch also adds an ID to sock_reuseport. A later patch will introduce BPF_PROG_TYPE_SK_REUSEPORT which allows a bpf prog to select a sk from a bpf map. It is inflexible to statically enforce a bpf map can only contain the sk belonging to a particular reuse->socks[] (i.e. same IP:PORT) during the bpf verification time. For example, think about the the map-in-map situation where the inner map can be dynamically changed in runtime and the outer map may have inner maps belonging to different reuseport groups. Hence, when the bpf prog (in the new BPF_PROG_TYPE_SK_REUSEPORT type) selects a sk, this selected sk has to be checked to ensure it belongs to the requesting reuseport group (i.e. the group serving that IP:PORT). The "sk->sk_reuseport_cb" pointer cannot be used for this checking purpose because the pointer value will change after reuseport_grow(). Instead of saving all checking conditions like the ones preced calling "reuseport_add_sock()" and compare them everytime a bpf_prog is run, a 32bits ID is introduced to survive the reuseport_grow(). The ID is only acquired if any of the reuse->socks[] is added to the newly introduced "BPF_MAP_TYPE_REUSEPORT_ARRAY" map. If "BPF_MAP_TYPE_REUSEPORT_ARRAY" is not used, the changes in this patch is a no-op. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
![]() |
40a1227ea8 |
tcp: Avoid TCP syncookie rejected by SO_REUSEPORT socket
Although the actual cookie check "__cookie_v[46]_check()" does not involve sk specific info, it checks whether the sk has recent synq overflow event in "tcp_synq_no_recent_overflow()". The tcp_sk(sk)->rx_opt.ts_recent_stamp is updated every second when it has sent out a syncookie (through "tcp_synq_overflow()"). The above per sk "recent synq overflow event timestamp" works well for non SO_REUSEPORT use case. However, it may cause random connection request reject/discard when SO_REUSEPORT is used with syncookie because it fails the "tcp_synq_no_recent_overflow()" test. When SO_REUSEPORT is used, it usually has multiple listening socks serving TCP connection requests destinated to the same local IP:PORT. There are cases that the TCP-ACK-COOKIE may not be received by the same sk that sent out the syncookie. For example, if reuse->socks[] began with {sk0, sk1}, 1) sk1 sent out syncookies and tcp_sk(sk1)->rx_opt.ts_recent_stamp was updated. 2) the reuse->socks[] became {sk1, sk2} later. e.g. sk0 was first closed and then sk2 was added. Here, sk2 does not have ts_recent_stamp set. There are other ordering that will trigger the similar situation below but the idea is the same. 3) When the TCP-ACK-COOKIE comes back, sk2 was selected. "tcp_synq_no_recent_overflow(sk2)" returns true. In this case, all syncookies sent by sk1 will be handled (and rejected) by sk2 while sk1 is still alive. The userspace may create and remove listening SO_REUSEPORT sockets as it sees fit. E.g. Adding new thread (and SO_REUSEPORT sock) to handle incoming requests, old process stopping and new process starting...etc. With or without SO_ATTACH_REUSEPORT_[CB]BPF, the sockets leaving and joining a reuseport group makes picking the same sk to check the syncookie very difficult (if not impossible). The later patches will allow bpf prog more flexibility in deciding where a sk should be located in a bpf map and selecting a particular SO_REUSEPORT sock as it sees fit. e.g. Without closing any sock, replace the whole bpf reuseport_array in one map_update() by using map-in-map. Getting the syncookie check working smoothly across socks in the same "reuse->socks[]" is important. A partial solution is to set the newly added sk's ts_recent_stamp to the max ts_recent_stamp of a reuseport group but that will require to iterate through reuse->socks[] OR pessimistically set it to "now - TCP_SYNCOOKIE_VALID" when a sk is joining a reuseport group. However, neither of them will solve the existing sk getting moved around the reuse->socks[] and that sk may not have ts_recent_stamp updated, unlikely under continuous synflood but not impossible. This patch opts to treat the reuseport group as a whole when considering the last synq overflow timestamp since they are serving the same IP:PORT from the userspace (and BPF program) perspective. "synq_overflow_ts" is added to "struct sock_reuseport". The tcp_synq_overflow() and tcp_synq_no_recent_overflow() will update/check reuse->synq_overflow_ts if the sk is in a reuseport group. Similar to the reuseport decision in __inet_lookup_listener(), both sk->sk_reuseport and sk->sk_reuseport_cb are tested for SO_REUSEPORT usage. Update on "synq_overflow_ts" happens at roughly once every second. A synflood test was done with a 16 rx-queues and 16 reuseport sockets. No meaningful performance change is observed. Before and after the change is ~9Mpps in IPv4. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
![]() |
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
b4ace4f1ae |
soreuseport: fix NULL ptr dereference SO_REUSEPORT after bind
Marc Dionne discovered a NULL pointer dereference when setting
SO_REUSEPORT on a socket after it is bound.
This patch removes the assumption that at least one socket in the
reuseport group is bound with the SO_REUSEPORT option before other
bind calls occur.
Fixes:
|
||
![]() |
538950a1b7 |
soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF
Expose socket options for setting a classic or extended BPF program for use when selecting sockets in an SO_REUSEPORT group. These options can be used on the first socket to belong to a group before bind or on any socket in the group after bind. This change includes refactoring of the existing sk_filter code to allow reuse of the existing BPF filter validation checks. Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
![]() |
ef456144da |
soreuseport: define reuseport groups
struct sock_reuseport is an optional shared structure referenced by each socket belonging to a reuseport group. When a socket is bound to an address/port not yet in use and the reuseport flag has been set, the structure will be allocated and attached to the newly bound socket. When subsequent calls to bind are made for the same address/port, the shared structure will be updated to include the new socket and the newly bound socket will reference the group structure. Usually, when an incoming packet was destined for a reuseport group, all sockets in the same group needed to be considered before a dispatching decision was made. With this structure, an appropriate socket can be found after looking up just one socket in the group. This shared structure will also allow for more complicated decisions to be made when selecting a socket (eg a BPF filter). This work is based off a similar implementation written by Ying Cai <ycai@google.com> for implementing policy-based reuseport selection. Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |