commit fb3c293b82 upstream.
The commit f274baa49b ("ALSA: usb-audio: Allow non-vmalloc buffer
for PCM buffers") introduced the mode to allocate coherent pages for
PCM buffers, and it used bus->controller device as its DMA device.
It turned out, however, that bus->sysdev is a more appropriate device
to be used for DMA mapping in HCD code.
This patch corrects the device reference accordingly.
Note that, on most platforms, both point to the very same device,
hence this patch doesn't change anything practically. But on
platforms like xhcd-plat hcd, the change becomes effective.
Fixes: f274baa49b ("ALSA: usb-audio: Allow non-vmalloc buffer for PCM buffers")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210205144559.29555-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c06ccf3ebb upstream.
The calculation of in_cables and out_cables bitmaps are done with the
bit shift by the value from the descriptor, which is an arbitrary
value, and can lead to UBSAN shift-out-of-bounds warnings.
Fix it by filtering the bad descriptor values with the check of the
upper bound 0x10 (the cable bitmaps are 16 bits).
Reported-by: syzbot+92e45ae45543f89e8c88@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201223174557.10249-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9df28edce7 upstream.
Some buggy firmware don't give the current sample rate but leaves
zero. Handle this case more gracefully without warning but just skip
the current rate verification from the next time.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201218145858.2357-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6dde8ffd0 upstream.
The current channel-map control implementation in USB-audio driver may
lead to an error message like
"control 3:0:0:Playback Channel Map:0: access overflow"
when CONFIG_SND_CTL_VALIDATION is set. It's because the chmap get
callback clears the whole array no matter which count is set, and
rather the false-positive detection.
This patch fixes the problem by clearing only the needed array range
at usb_chmap_ctl_get().
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201211130048.6358-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Found one more Logitech device, BCC950 ConferenceCam, which needs
the same delay here. This makes 3 out of 3 devices I have tried.
Therefore, add a delay for all Logitech devices as it does not hurt.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Cc: <stable@vger.kernel.org> # 4.19.y, 5.4.y
Link: https://lore.kernel.org/r/20201117122803.24310-1-joakim.tjernlund@infinera.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes audio distortion on playback for the Allen&Heath
Qu-16.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201104115717.GA19046@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes audio distortion on playback for the Yamaha MODX.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Tested-by: Frank Slotta <frank.slotta@posteo.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201104120705.GA19126@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Khadas audio devices ( USB_ID_VENDOR 0x3353 )
have DSD-capable implementations from XMOS
need add new usb vendor id for recognition
Signed-off-by: Artem Lapkin <art@khadas.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201103103311.5435-1-art@khadas.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Zoom UAC-2 USB audio interface provides an async playback endpoint
("1 OUT (ASYNC)") and capture endpoint ("2 IN (ASYNC)"), both with
2-channel S32_LE in 44.1, 48, 88.2, 96, 176.4, or 192
kilosamples/s. The device provides explicit feedback to adjust the
host's playback rate, but the feedback appears unstable and biased
relative to the device's capture rate.
"alsaloop -t 1000" experiences playback underruns and tries to
resample the captured audio to match the varying playback
rate. Forcing the kernel to use implicit feedback appears to
produce more stable results. This causes the host to transmit one
playback sample for each capture sample received. (Zoom North America
has been notified of this change.)
Signed-off-by: Keith Winstein <keithw@cs.stanford.edu>
Tested-by: Keith Winstein <keithw@cs.stanford.edu>
Cc: <stable@vger.kernel.org>
BugLink: https://lore.kernel.org/r/20201027071841.GA164525@trolley.csail.mit.edu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just a few additional small and trivial fixes.
-----BEGIN PGP SIGNATURE-----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=sYVq
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few additional small and trivial fixes"
* tag 'sound-fix-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix the return value if cb func is already registered
ALSA: usb-audio: Line6 Pod Go interface requires static clock rate quirk
ALSA: hda/ca0132: make some const arrays static, makes object smaller
ALSA: sparc: dbri: fix repeated word 'the'
Recently released Line6 Pod Go requires static clock rate quirk to make
its usb audio interface working. Added its usb id to the list of similar
line6 devices.
Signed-off-by: Lukasz Halman <lukasz.halman@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201020061409.GA24382@TAG009442538903
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The amount of changes is smaller at this round (what a surprise),
but lots of activity is seen. Most of changes are about ASoC
driver development, especially Intel platforms.
Here are some highlights:
General:
* Replace all tasklet usages with other alternatives
* Cleanup of the ASoC error unwinding code
* Fixes for trivial issues caught by static checker
* Spell fixes allover the places
ALSA Core:
* Lockdep fix for control devices
* Fix for potential OSS sequencer mutex stalls
HD-audio and USB-audio:
* SoundBlaster AE-7 support
* Changes in quirk table for the rename handling
* Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2.
ASoC:
* Lots of updates for Intel SOF and SoundWire enablement
* Replacement of the DSP driver for some older x86 systems;
the new code was written from scratch, better maintenance
expected
* Helpers for parsing auxiluary devices from the device tree
* New support for AllWinner A64, Cirrus Logic CS4234, Mediatek
MT6359 Microchip S/PDIF TX and RX controllers, Realtek RT1015P,
and Texas Instruments J721E, TAS2110, TAS2564 and TAS2764
-----BEGIN PGP SIGNATURE-----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=nWAp
-----END PGP SIGNATURE-----
Merge tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The amount of changes is smaller at this round (what a surprise), but
lots of activity is seen. Most of changes are about ASoC driver
development, especially Intel platforms. Here are some highlights:
General:
- Replace all tasklet usages with other alternatives
- Cleanup of the ASoC error unwinding code
- Fixes for trivial issues caught by static checker
- Spell fixes allover the places
ALSA Core:
- Lockdep fix for control devices
- Fix for potential OSS sequencer mutex stalls
HD-audio and USB-audio:
- SoundBlaster AE-7 support
- Changes in quirk table for the rename handling
- Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2.
ASoC:
- Lots of updates for Intel SOF and SoundWire enablement
- Replacement of the DSP driver for some older x86 systems; the new
code was written from scratch, better maintenance expected
- Helpers for parsing auxiluary devices from the device tree
- New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359
Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas
Instruments J721E, TAS2110, TAS2564 and TAS2764"
* tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (498 commits)
ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close
ALSA: hda: fix jack detection with Realtek codecs when in D3
ALSA: fireworks: use semicolons rather than commas to separate statements
ALSA: hda: use semicolons rather than commas to separate statements
ALSA: hda/i915 - fix list corruption with concurrent probes
ASoC: dmaengine: Document support for TX only or RX only streams
ASoC: mchp-spdiftx: remove 'TX' from playback stream name
ASoC: ti: davinci-mcasp: Use &pdev->dev for early dev_warn
ASoC: tas2764: Add the driver for the TAS2764
dt-bindings: tas2764: Add the TAS2764 binding doc
ASoC: Intel: catpt: Add explicit DMADEVICES kconfig dependency
ASoC: Intel: catpt: Fix compilation when CONFIG_MODULES is disabled
ASoC: stm32: dfsdm: add actual resolution trace
ASoC: stm32: dfsdm: change rate limits
ASoC: qcom: sc7180: Add support for audio over DP
Asoc: qcom: lpass-platform : Increase buffer size
ASoC: qcom: Add support for lpass hdmi driver
Asoc: qcom: lpass:Update lpaif_dmactl members order
Asoc:qcom:lpass-cpu:Update dts property read API
ASoC: dt-bindings: Add dt binding for lpass hdmi
...
The usb_control_msg_send() and usb_control_msg_recv() calls can return
an error if a "short" write/read happens, and they can handle data off
of the stack, so move the driver over to using those calls instead,
saving some logic when dynamically allocating memory.
v2: API change of use usb_control_msg_send() and usb_control_msg_recv()
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200914153756.3412156-9-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200923134348.23862-13-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_control_msg_send() and usb_control_msg_recv() calls can return
an error if a "short" write/read happens, so move the driver over to
using those calls instead, saving some logic in the wrapper functions
that were being used in this driver.
This also resolves a long-staging bug where data on the stack was being
sent in a USB control message, which was not allowed.
v2: API change of usb_control_msg_send()
Cc: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200914153756.3412156-8-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200923134348.23862-11-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_control_msg_send() call can handle data on the stack, as well as
returning an error if a "short" write happens, so move the driver over
to using that call instead. This ends up removing a helper function
that is no longer needed.
v2: API change in usb_control_msg_send()
Cc: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200914153756.3412156-7-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200923134348.23862-10-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch extends support for DJM-250MK2 and allows mapping
playback and capture channels to available sources.
Configures the card through USB commands.
Signed-off-by: František Kučera <franta-linux@frantovo.cz>
Link: https://lore.kernel.org/r/20200922144206.10472-1-konference@frantovo.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 34dedd2a83.
According to Realtek, volume FU works for line-in.
I can confirm volume control works after device firmware is updated.
Fixes: 34dedd2a83 ("ALSA: usb-audio: Disable Lenovo P620 Rear line-in volume control")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200915103925.12777-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A USB device will always haev a bi-directional endpoint 0, that's just
how the devices work, so no need to check for that in a few quirk tests
as it will always pass.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Alexander Tsoy <alexander@tsoy.me>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200914153756.3412156-12-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_control_msg_send() call can return an error if a "short" write
happens, so move the driver over to using that call instead.
Cc: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200914153756.3412156-10-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_control_msg_send() and usb_control_msg_recv() calls can return
an error if a "short" write/read happens, and they can handle data off
of the stack, so move the driver over to using those calls instead,
saving some logic when dynamically allocating memory.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200914153756.3412156-9-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_control_msg_send() and usb_control_msg_recv() calls can return
an error if a "short" write/read happens, so move the driver over to
using those calls instead, saving some logic in the wrapper functions
that were being used in this driver.
This also resolves a long-staging bug where data on the stack was being
sent in a USB control message, which was not allowed.
Cc: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200914153756.3412156-8-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_control_msg_send() call can handle data on the stack, as well as
returning an error if a "short" write happens, so move the driver over
to using that call instead. This ends up removing a helper function
that is no longer needed.
Cc: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200914153756.3412156-7-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
snd_usb_pipe_sanity_check() is a great function, so let's move it into
the USB core so that other parts of the kernel, including the USB core,
can call it.
Name it usb_pipe_type_check() to match the existing
usb_urb_ep_type_check() call, which now uses this function.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Eli Billauer <eli.billauer@gmail.com>
Cc: Emiliano Ingrassia <ingrassia@epigenesys.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexander Tsoy <alexander@tsoy.me>
Cc: "Geoffrey D. Bennett" <g@b4.vu>
Cc: Jussi Laako <jussi@sonarnerd.net>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Cc: Dmitry Panchenko <dmitry@d-systems.ee>
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Jesus Ramos <jesus-ramos@live.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200914153756.3412156-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. In UA101 driver, a tasklet is still
used for handling the output URBs. It can be achieved gracefully with
a work queued in the high-prio system workqueue, too.
This patch replaces the tasklet usage in UA101 driver with a simple
work.
Link: https://lore.kernel.org/r/20200903104131.21097-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. In USB-audio driver, a tasklet is
still used in MIDI interface code for handling the output byte
stream. It can be achieved gracefully with a work queued in the
high-prio system workqueue.
This patch replaces the tasklet usage in USB-audio driver with a
simple work.
Link: https://lore.kernel.org/r/20200903104131.21097-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Back-merge to apply the tasklet conversion patches that are based
on the already applied tasklet API changes on 5.9-rc4.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200902040221.354941-11-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200902040221.354941-10-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch extends support for DJM-250MK2 and allows recording.
However, DVS is not possible yet (see the comment in code).
Signed-off-by: František Kučera <franta-linux@frantovo.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200825153113.6352-1-konference@frantovo.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 51ab5d77dc ("ALSA: usb-audio: Properly match with audio
interface class") converted the quirk entries that have both vid/pid
pair and bInterface fields to match with all those with a new macro
USB_AUDIO_CLASS(). However, it turned out that those are false
conversions; all those (but the unknown KeithMcMillen device) are
actually with vendor-specific interface class, hence the conversions
broke the matching.
This patch corrects those entries to the right one,
USB_DEVICE_VENDOR_SPEC() (and USB_DEVICE() for KeithMcMillen to be
sure), and drop the unused USB_AUDIO_CLASS macro again.
Fixes: 51ab5d77dc ("ALSA: usb-audio: Properly match with audio interface class")
Reported-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200823113251.10175-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Correct quirk table entries for Lenovo ThinkStation P620, too.
The name and profile strings are now set from a different table, hence
removed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If USB autosuspend is enabled, both front and rear panel can no longer
detect jack insertion.
Enable USB remote wakeup, i.e. needs_remote_wakeup = 1, doesn't help
either.
So disable USB autosuspend to prevent missing jack detection event.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200823105854.26950-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
