Commit graph

17 commits

Author SHA1 Message Date
Xiubo Li
f9009efac4 ceph: add dentry lease metric support
For dentry leases, only count the hit/miss info triggered from the vfs
calls. For the cases like request reply handling and ceph_trim_dentries,
ignore them.

For now, these are only viewable using debugfs. Future patches will
allow the client to send the stats to the MDS.

The output looks like:

item          total           miss            hit
-------------------------------------------------
d_lease       11              7               141

URL: https://tracker.ceph.com/issues/43215
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-06-01 13:22:51 +02:00
Jeff Layton
24604f7e2b ceph: move net/ceph/ceph_fs.c to fs/ceph/util.c
All of these functions are only called from CephFS, so move them into
ceph.ko, and drop the exports.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:40 +01:00
Jeff Layton
321fe13c93 ceph: add buffered/direct exclusionary locking for reads and writes
xfstest generic/451 intermittently fails. The test does O_DIRECT writes
to a file, and then reads back the result using buffered I/O, while
running a separate set of tasks that are also doing buffered reads.

The client will invalidate the cache prior to a direct write, but it's
easy for one of the other readers' replies to race in and reinstantiate
the invalidated range with stale data.

To fix this, we must to serialize direct I/O writes and buffered reads.
We could just sprinkle in some shared locks on the i_rwsem for reads,
and increase the exclusive footprint on the write side, but that would
cause O_DIRECT writes to end up serialized vs. other direct requests.

Instead, borrow the scheme used by nfs.ko. Buffered writes take the
i_rwsem exclusively, but buffered reads take a shared lock, allowing
them to run in parallel.

O_DIRECT requests also take a shared lock, but we need for them to not
run in parallel with buffered reads.  A flag on the ceph_inode_info is
used to indicate whether it's in direct or buffered I/O mode. When a
conflicting request is submitted, it will block until the inode can be
flipped to the necessary mode.

Link: https://tracker.ceph.com/issues/40985
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16 12:06:25 +02:00
Luis Henriques
fb18a57568 ceph: quota: add initial infrastructure to support cephfs quotas
This patch adds the infrastructure required to support cephfs quotas as it
is currently implemented in the ceph fuse client.  Cephfs quotas can be
set on any directory, and can restrict the number of bytes or the number
of files stored beneath that point in the directory hierarchy.

Quotas are set using the extended attributes 'ceph.quota.max_files' and
'ceph.quota.max_bytes', and can be removed by setting these attributes to
'0'.

Link: http://tracker.ceph.com/issues/22372
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02 11:17:51 +02:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Guangliang Zhao
7221fe4c2e ceph: add acl for cephfs
Signed-off-by: Guangliang Zhao <lucienchao@gmail.com>
Reviewed-by: Li Wang <li.wang@ubuntykylin.com>
Reviewed-by: Zheng Yan <zheng.z.yan@intel.com>
2013-12-31 20:32:01 +02:00
Milosz Tanski
99ccbd229c ceph: use fscache as a local presisent cache
Adding support for fscache to the Ceph filesystem. This would bring it to on
par with some of the other network filesystems in Linux (like NFS, AFS, etc...)

In order to mount the filesystem with fscache the 'fsc' mount option must be
passed.

Signed-off-by: Milosz Tanski <milosz@adfin.com>
Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-06 16:50:11 +00:00
Tracey Dent
582c86e690 ceph: Makefile: Remove unnessary code
Remove the if and else conditional because the code is in mainline and there
is no need in it being there.

Also, Changed Makefile to use <modules>-y instead of <modules>-objs
because -objs is deprecated and not mentioned in
 Documentation/kbuild/makefiles.txt.

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-12 15:15:13 -08:00
Yehuda Sadeh
3d14c5d2b6 ceph: factor out libceph from Ceph file system
This factors out protocol and low-level storage parts of ceph into a
separate libceph module living in net/ceph and include/linux/ceph.  This
is mostly a matter of moving files around.  However, a few key pieces
of the interface change as well:

 - ceph_client becomes ceph_fs_client and ceph_client, where the latter
   captures the mon and osd clients, and the fs_client gets the mds client
   and file system specific pieces.
 - Mount option parsing and debugfs setup is correspondingly broken into
   two pieces.
 - The mon client gets a generic handler callback for otherwise unknown
   messages (mds map, in this case).
 - The basic supported/required feature bits can be expanded (and are by
   ceph_fs_client).

No functional change, aside from some subtle error handling cases that got
cleaned up in the refactoring process.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:37:28 -07:00
Greg Farnum
40819f6fb2 ceph: add flock/fcntl lock support
Implement flock inode operation to support advisory file locking.  All
lock/unlock operations are synchronous with the MDS.  Lock state is
sent when reconnecting to a recovering MDS to restore the shared lock
state.

Signed-off-by: Greg Farnum <gregf@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-02 16:10:53 -07:00
Sage Weil
ec0994e48e ceph: add support for auth_x authentication protocol
The auth_x protocol implements support for a kerberos-like mutual
authentication infrastructure used by Ceph.  We do not simply use vanilla
kerberos because of scalability and performance issues when dealing with
a large cluster of nodes providing a single logical service.

Auth_x provides mutual authentication of client and server and protects
against replay and man in the middle attacks.  It does not encrypt
the full session over the wire, however, so data payload may still be
snooped.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-11 11:48:45 -08:00
Sage Weil
8b6e4f2d8b ceph: aes crypto and base64 encode/decode helpers
Helpers to encrypt/decrypt AES and base64.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-10 15:04:46 -08:00
Sage Weil
58bb3b374b ceph: support ceph_pagelist for message payload
The ceph_pagelist is a simple list of whole pages, strung together via
their lru list_head.  It facilitates encoding to a "buffer" of unknown
size.  Allow its use in place of the ceph_msg page vector.

This will be used to fix the huge buffer preallocation woes of MDS
reconnection.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23 12:12:31 -08:00
Sage Weil
4e7a5dcd1b ceph: negotiate authentication protocol; implement AUTH_NONE protocol
When we open a monitor session, we send an initial AUTH message listing
the auth protocols we support, our entity name, and (possibly) a previously
assigned global_id.  The monitor chooses a protocol and responds with an
initial message.

Initially implement AUTH_NONE, a dummy protocol that provides no security,
but works within the new framework.  It generates 'authorizers' that are
used when connecting to (mds, osd) services that simply state our entity
name and global_id.

This is a wire protocol change.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-18 16:19:57 -08:00
Sage Weil
1654dd0cf5 ceph: make object hash a pg_pool property
The object will be hashed to a placement seed (ps) based on the pg_pool's
hash function.  This allows new hashes to be introduced into an existing
object store, or selection of a hash appropriate to the objects that
will be stored in a particular pool.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-06 21:55:25 -08:00
Sage Weil
c6cf726316 ceph: make CRUSH hash functions non-inline
These are way to big to be inline.  I missed crush/* when doing the inline
audit for akpm's review.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-06 16:39:26 -08:00
Sage Weil
9030aaf9bf ceph: Kconfig, Makefile
Kconfig options and Makefile.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:15 -07:00