When mounting with SMB2.1 or earlier, even with nomultichannel, we
log the confusing warning message:
"CIFS: VFS: multichannel is not supported on this protocol version, use 3.0 or above"
Fix this so that we don't log this unless they really are trying
to mount with multichannel.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215608
Reported-by: Kim Scarborough <kim@scarborough.kim>
Cc: stable@vger.kernel.org # 5.11+
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Set workstation_name from the master_tcon for multiuser mounts.
Just in case, protect size_of_ntlmssp_blob against a NULL workstation_name.
Fixes: 49bd49f983 ("cifs: send workstation name during ntlmssp session setup")
Cc: stable@vger.kernel.org # 5.16
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Ryan Bair <ryandbair@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For improved debugging it can be helpful to send version information
as other clients do during NTLMSSP negotiation. See protocol document
MS-NLMP section 2.2.1.1
Set the major and minor versions based on the kernel version, and the
BuildNumber based on the internal cifs.ko module version number,
and following the recommendation in the protocol documentation
(MS-NLMP section 2.2.10) we set the NTLMRevisionCurrent field to 15.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Recent restructuring of cifs_reconnect introduced a helper func
named cifs_ses_mark_for_reconnect, which updates the state of tcp
session for all the channels of a session for reconnect.
However, this does not update the session state and chans_need_reconnect
bitmask. This change fixes that.
Also, cifs_mark_tcp_sess_for_reconnect should mark set the bitmask
for all channels when the whole session is marked for reconnect.
Fixed that here too.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The status of tcp session, smb session and tcon have the
same flow, irrespective of the SMB version used. Hence
these status checks and updates should happen in the
version independent callers of these commands.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
A spin lock called chan_lock was introduced recently.
But not all accesses were protected. Doing that with
this change.
To make sure that a channel is not freed when in use,
we need to introduce a ref count. But today, we don't
ever free channels.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Recent changes to multichannel required some adjustments in
the way connection states transitioned during/after reconnect.
Also some minor fixes:
1. A pending switch of GlobalMid_Lock to cifs_tcp_ses_lock
2. Relocations of the code that logs reconnect
3. Changed some code in allocate_mid to suit the new scheme
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Eliminate the follow smatch warning:
fs/cifs/sess.c:1581 sess_auth_rawntlmssp_authenticate() warn:
inconsistent indenting
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
One of my previous fixes:
cifs: send workstation name during ntlmssp session setup
...changed the prototype of build_ntlmssp_negotiate_blob
from being allocated by the caller to being allocated within
the function. The caller needs to free this object too.
While SMB2 version of the caller did it, I forgot to free
for the SMB1 version. Fixing that here.
Fixes: 49bd49f983 ("cifs: send workstation name during ntlmssp session setup")
Cc: stable@vger.kernel.org # 5.16
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If functions like cifs_negotiate_protocol, cifs_setup_session,
cifs_tree_connect are called in parallel on different channels,
each of these will be execute the requests. This maybe unnecessary
in some cases, and only the first caller may need to do the work.
This is achieved by having more states for the tcp/smb/tcon session
status fields. And tracking the state of reconnection based on the
state machine.
For example:
for tcp connections:
CifsNew/CifsNeedReconnect ->
CifsNeedNegotiate ->
CifsInNegotiate ->
CifsNeedSessSetup ->
CifsInSessSetup ->
CifsGood
for smb sessions:
CifsNew/CifsNeedReconnect ->
CifsGood
for tcon:
CifsNew/CifsNeedReconnect ->
CifsInFilesInvalidate ->
CifsNeedTcon ->
CifsInTcon ->
CifsGood
If any channel reconnect sees that it's in the middle of
transition to CifsGood, then they can skip the function.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
While checking/updating status for tcp ses, smb ses or tcon,
we take GlobalMid_Lock. This doesn't make any sense.
Replaced it with cifs_tcp_ses_lock.
Ideally, we should take a spin lock per struct.
But since tcp ses, smb ses and tcon objects won't add up to a lot,
I think there should not be too much contention.
Also, in few other places, these are checked without locking.
Added locking for these.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
chan_count keeps track of the total number of channels.
Since at least the primary channel will always be connected,
this value can never go below 1. Warn if that happens.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We use the concept of "binding" when one of the secondary channel
is in the process of connecting/reconnecting to the server. Till this
binding process completes, and the channel is bound to an existing session,
we redirect traffic from other established channels on the binding channel,
effectively blocking all traffic till individual channels get reconnected.
With my last set of commits, we can get rid of this binding serialization.
We now have a bitmap of connection states for each channel. We will use
this bitmap instead for tracking channel status.
Having a bitmap also now enables us to keep the session alive, as long
as even a single channel underneath is alive.
Unfortunately, this also meant that we need to supply the tcp connection
info for the channel during all negotiate and session setup functions.
These changes have resulted in a slightly bigger code churn.
However, I expect perf and robustness improvements in the mchan scenario
after this change.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We needed a way to identify the channels under the smb session
which are in reconnect, so that the traffic to other channels
can continue. So I replaced the bool need_reconnect with
a bitmask identifying all the channels that need reconnection
(named chans_need_reconnect). When a channel needs reconnection,
the bit corresponding to the index of the server in ses->chans
is used to set this bitmask. Checking if no channels or all
the channels need reconnect then becomes very easy.
Also wrote some helper macros for checking and setting the bits.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Warn on the lack of key exchange during NTLMSSP authentication rather
than aborting it as there are some servers that do not set it in
CHALLENGE message.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Recently, a new field got added to the smb3_fs_context struct
named server_hostname. While creating extra channels, pick up
this field from primary channel.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use new cifs_ses_mark_for_reconnect() helper to mark all session
channels for reconnect instead of duplicating it in different places.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
It is better to print debug messages outside of the chan_lock
spinlock where possible.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Addresses-Coverity: 1493854 ("Thread deadlock")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Today, we don't have any way to get the smb session for any
of the secondary channels. Introducing a pointer to the primary
server from server struct of any secondary channel. The value will
be NULL for the server of the primary channel. This will enable us
to get the smb session for any channel.
This will be needed for some of the changes that I'm planning
to make soon.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Introducing a new spin lock to protect all the channel related
fields in a cifs_ses struct. This lock should be taken
whenever dealing with the channel fields, and should be held
only for very short intervals which will not sleep.
Currently, all channel related fields in cifs_ses structure
are protected by session_mutex. However, this mutex is held for
long periods (sometimes while waiting for a reply from server).
This makes the codepath quite tricky to change.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
During the ntlmssp session setup (authenticate phases)
send the client workstation info. This can make debugging easier on
servers.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
checkpatch complains about source files with filenames (e.g. in
these cases just below the SPDX header in comments at the top of
various files in fs/cifs). It also is helpful to change this now
so will be less confusing when the parent directory is renamed
e.g. from fs/cifs to fs/smb_client (or fs/smbfs)
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
for SMB1.
This removes the dependency to DES.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb_buf is allocated by small_smb_init_no_tc(), and buf type is
CIFS_SMALL_BUFFER, so we should use cifs_small_buf_release() to
release it in failed path.
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add SPDX license identifier and replace license boilerplate.
Corrects various checkpatch errors with the older format for
noting the LGPL license.
Signed-off-by: Steve French <stfrench@microsoft.com>
Use %pI6 for IPv6 addresses
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
We were ignoring CAP_MULTI_CHANNEL in the server response - if the
server doesn't support multichannel we should not be attempting it.
See MS-SMB2 section 3.2.5.2
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Steve French <stfrench@microsoft.com>
With multichannel, operations like the queries
from "ls -lR" can cause all credits to be used and
errors to be returned since max_credits was not
being set correctly on the secondary channels and
thus the client was requesting 0 credits incorrectly
in some cases (which can lead to not having
enough credits to perform any operation on that
channel).
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
ses->serverName is not the server name, but the string form
of the ip address of the server. Change the name to ip_addr
to avoid confusion (and fix the array length to match
maximum length of ipv6 address).
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Only load/unload local_nls from cifs_sb and just make the ctx
contain a pointer to cifs_sb->ctx.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
See Documentation/filesystems/mount_api.rst for details on new mount API
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Harmonize and change all such variables to 'ctx', where possible.
No changes to actual logic.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break/goto statements instead of
just letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Convert cpu_to_be32(be32_to_cpu(E1) + E2) to use be32_add_cpu().
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove the superfuous break, as there is a 'return' before it.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
first steps in trying to make channels properly reconnect.
* add cifs_ses_find_chan() function to find the enclosing cifs_chan
struct it belongs to
* while we have the session lock and are redoing negprot and
sess.setup in smb2_reconnect() redo the binding of channels.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add a cifs_chan pointer in struct cifs_ses that points to the channel
currently being bound if ses->binding is true.
Previously it was always the channel past the established count.
This will make reconnecting (and rebinding) a channel easier later on.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use pr_fmt to standardize all logging for fs/cifs.
Some logging output had no CIFS: specific prefix.
Now all output has one of three prefixes:
o CIFS:
o CIFS: VFS:
o Root-CIFS:
Miscellanea:
o Convert printks to pr_<level>
o Neaten macro definitions
o Remove embedded CIFS: prefixes from formats
o Convert "illegal" to "invalid"
o Coalesce formats
o Add missing '\n' format terminations
o Consolidate multiple cifs_dbg continuations into single calls
o More consistent use of upper case first word output logging
o Multiline statement argument alignment and wrapping
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When no interfaces are returned by the server we cannot open multiple
channels. Make it more obvious by reporting that to the user at the
VFS log level.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
iface[0] was accessed regardless of the count value and without
locking.
* check count before accessing any ifaces
* make copy of iface list (it's a simple POD array) and use it without
locking.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
With the addition of SMB session channels, we introduced new TCP
server pointers that have no sessions or tcons associated with them.
In this case, when we started looking for TCP connections, we might
end up picking session channel rather than the master connection,
hence failing to get either a session or a tcon.
In order to fix that, this patch introduces a new "is_channel" field
to TCP_Server_Info structure so we can skip session channels during
lookup of connections.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Previously we would only loop over the iface list once.
This patch tries to loop over multiple times until all channels are
opened. It will also try to reuse RSS ifaces.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
After doing mount() successfully we call cifs_try_adding_channels()
which will open as many channels as it can.
Channels are closed when the master session is closed.
The master connection becomes the first channel.
,-------------> global cifs_tcp_ses_list <-------------------------.
| |
'- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-'
(master con) (chan#1 con) (chan#2 con)
| ^ ^ ^
v '--------------------|--------------------'
cifs_ses |
- chan_count = 3 |
- chans[] ---------------------'
- smb3signingkey[]
(master signing key)
Note how channel connections don't have sessions. That's because
cifs_ses can only be part of one linked list (list_head are internal
to the elements).
For signing keys, each channel has its own signing key which must be
used only after the channel has been bound. While it's binding it must
use the master session signing key.
For encryption keys, since channel connections do not have sessions
attached we must now find matching session by looping over all sessions
in smb2_get_enc_key().
Each channel is opened like a regular server connection but at the
session setup request step it must set the
SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to.
Finally, while sending in compound_send_recv() for requests that
aren't negprot, ses-setup or binding related, use a channel by cycling
through the available ones (round-robin).
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently a lot of the code to initialize a connection & session uses
the cifs_ses as input. But depending on if we are opening a new session
or a new channel we need to use different server pointers.
Add a "binding" flag in cifs_ses and a helper function that returns
the server ptr a session should use (only in the sess establishment
code path).
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fixes gcc '-Wunused-but-set-variable' warning:
fs/cifs/sess.c: In function sess_auth_lanman:
fs/cifs/sess.c:910:8: warning: variable capabilities set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Using strscpy is cleaner, and avoids some problems with
handling maximum length strings. Linus noticed the
original problem and Aurelien pointed out some additional
problems. Fortunately most of this is SMB1 code (and
in particular the ASCII string handling older, which
is less common).
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fixes gcc '-Wunused-but-set-variable' warning:
fs/cifs/sess.c: In function '_sess_auth_rawntlmssp_assemble_req':
fs/cifs/sess.c:1157:18: warning:
variable 'smb_buf' set but not used [-Wunused-but-set-variable]
It never used since commit cc87c47d9d ("cifs: Separate rawntlmssp auth
from CIFS_SessSetup()")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
To avoid the warning:
warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steve French <stfrench@microsoft.com>
